-# configure.in --- xscreensaver, Copyright (c) 1997 Jamie Zawinski.
+# configure.in --- xscreensaver, Copyright (c) 1997-2005 Jamie Zawinski.
#
+AC_PREREQ(2.52)
AC_INIT(driver/subprocs.c)
AC_CONFIG_HEADER(config.h)
echo "current directory: `pwd`"
echo "command line was: $0 $@"
+###############################################################################
+#
+# Autoheader stuff
+#
+###############################################################################
+
+AH_TOP([
+/* config.h.in --- xscreensaver, Copyright (c) 1998-2000 Jamie Zawinski.
+ *
+ * The best way to set these parameters is by running the included `configure'
+ * script. That examines your system, and generates `config.h' from
+ * `config.h.in'.
+ *
+ * If something goes very wrong, you can edit `config.h' directly, but beware
+ * that your changes will be lost if you ever run `configure' again.
+ */
+])
+
+AH_TEMPLATE([HAVE_READ_DISPLAY_EXTENSION],
+ [Define this if you have the XReadDisplay extension (I think
+ this is an SGI-only thing; it's in
+ <X11/extensions/readdisplay.h>.) A few of the screenhacks will
+ take advantage of this if it's available.])
+
+AH_TEMPLATE([HAVE_XHPDISABLERESET],
+ [Define this if you have the XHPDisableReset function (an HP only
+ thing which allows the Ctrl-Sh-Reset key sequence to be
+ temporarily disabled.)])
+
+# This only ever existed in X11R4 and X11R5.
+#AH_TEMPLATE([HAVE_XIDLE_EXTENSION],
+# [Define this if you have the XIDLE extension installed. If you
+# have the XIDLE extension, this is recommended. (You have this
+# extension if the file /usr/include/X11/extensions/xidle.h
+# exists.) Turning on this flag lets XScreenSaver work better with
+# servers which support this extension; but it will still work
+# with servers which do not suport it, so it's a good idea to
+# compile in support for it if you can.])
+
+# Using this extension will crash your X server and make fading not work.
+#AH_TEMPLATE([HAVE_MIT_SAVER_EXTENSION],
+# [Define this if you have the MIT-SCREEN-SAVER extension
+# installed. See the caveats about this extension, above.
+# (It's available if /usr/include/X11/extensions/scrnsaver.h
+# exists.)])
+
+# This only ever existed on SGI hardware.
+#AH_TEMPLATE([HAVE_SGI_SAVER_EXTENSION],
+# [Define this if you have the SGI SCREEN_SAVER extension. This is
+# standard on Irix systems, and not available elsewhere.])
+
+# This only ever existed on SGI hardware.
+#AH_TEMPLATE([HAVE_SGI_VC_EXTENSION],
+# [Define this if you have the SGI-VIDEO-CONTROL extension. This
+# is standard on Irix systems, and not available elsewhere.])
+
+AH_TEMPLATE([HAVE_DPMS_EXTENSION],
+ [Define this if you have the XDPMS extension. This is standard
+ on sufficiently-recent XFree86 systems, and possibly elsewhere.
+ (It's available if the file /usr/include/X11/extensions/dpms.h
+ exists.)])
+
+AH_TEMPLATE([HAVE_XF86VMODE],
+ [Define this if you have the functions XF86VidModeGetModeLine()
+ and XF86VidModeGetViewPort(), in support of virtual desktops
+ where the X server's root window is bigger than the actual
+ screen. This is an XFree86 thing, and probably doesn't exist
+ elsewhere. (It's available if the file
+ /usr/include/X11/extensions/xf86vmode.h exists.)])
+
+AH_TEMPLATE([HAVE_XF86VMODE_GAMMA],
+ [Define this if you have the functions XF86VidModeGetGamma() and
+ XF86VidModeSetGamma(), which allow clients to change the gamma
+ response of the monitor. This is an XFree86 4.0.x thing, and
+ probably doesn't exist elsewhere. (It's available if the file
+ /usr/include/X11/extensions/xf86vmode.h exists and has stuff about
+ gamma in it.)])
+
+AH_TEMPLATE([HAVE_XF86VMODE_GAMMA_RAMP],
+ [Define this if you have the functions XF86VidModeGetGammaRamp()
+ and XF86VidModeSetGammaRamp(), which provide finer-grained
+ control than XF86VidMode[GS]etGamma(). These appeared in
+ XFree86 4.1.0.])
+
+AH_TEMPLATE([HAVE_XINERAMA],
+ [Define this if you have the Xinerama extension. This is
+ standard on sufficiently-recent XFree86 systems, and possibly
+ elsewhere. (It's available if the file
+ /usr/include/X11/extensions/Xinerama.h exists.)])
+
+AH_TEMPLATE([HAVE_XINPUT],
+ [Define this if you have the Xinput extension. This is
+ standard since X11R5, and is thus almost everywhere.
+ (It's available if the file /usr/include/X11/extensions/XInput.h
+ exists.)])
+
+AH_TEMPLATE([HAVE_XF86MISCSETGRABKEYSSTATE],
+ [Define this if you have the XF86MiscSetGrabKeysState function
+ (which allows the Ctrl-Alt-KP_star and Ctrl-Alt-KP_slash key
+ sequences to be temporarily disabled. Sadly, it doesn't affect
+ Ctrl-Alt-BS or Ctrl-Alt-F1.)])
+
+AH_TEMPLATE([HAVE_RANDR],
+ [Define this if you have the Resize and Rotate extension.
+ This is standard on sufficiently-recent XFree86 systems, and
+ possibly elsewhere. (It's available if the file
+ /usr/include/X11/extensions/Xrandr.h exists.)])
+
+AH_TEMPLATE([HAVE_RANDR_12],
+ [Define this if the RANDR library is version 1.2 or newer.])
+
+AH_TEMPLATE([HAVE_PROC_INTERRUPTS],
+ [Define this if you have a Linux-like /proc/interrupts file which
+ can be examined to determine when keyboard activity has
+ occurred.])
+
+AH_TEMPLATE([HAVE_MOTIF],[Define this if you have Motif.])
+
+AH_TEMPLATE([HAVE_XMCOMBOBOX],
+ [Define this if you have the XmComboBox Motif widget (Motif 2.0.)])
+
+AH_TEMPLATE([HAVE_GTK],[Define this if you have Gtk (any version.)])
+AH_TEMPLATE([HAVE_GTK2],[Define this if you have Gtk 2.x.])
+
+AH_TEMPLATE([HAVE_CRAPPLET],
+ [Define this if you have Gnome and want to build support for the
+ xscreensaver control panel in the Gnome Control Center
+ (gnomecc). (This is needed only with Gtk 1.x.)])
+
+AH_TEMPLATE([HAVE_CRAPPLET_IMMEDIATE],
+ [Define this if HAVE_CRAPPLET is defined, and the function
+ capplet_widget_changes_are_immediate() is available.])
+
+AH_TEMPLATE([HAVE_XML],[Define this if you have the XML library.])
+
+AH_TEMPLATE([HAVE_OLD_XML_HEADERS],
+ [Define this if you have the XML library headers in their old,
+ non-namespaced location (you lack the gnome-xml/libxml symlink)])
+
+AH_TEMPLATE([HAVE_XPM],
+ [Define this if you have the XPM library installed. Some of the
+ demos can make use of this if it is available.])
+
+AH_TEMPLATE([HAVE_GDK_PIXBUF],
+ [Define this if you have the GDK_Pixbuf library installed. Some
+ of the demos can make use of this if it is available.])
+
+AH_TEMPLATE([HAVE_GDK_PIXBUF_APPLY_EMBEDDED_ORIENTATION],
+ [Define this if you have the gdk_pixbuf_apply_embedded_orientation
+ function (gdk-pixbuf 2.12).])
+
+AH_TEMPLATE([HAVE_JPEGLIB],
+ [Define this if you have the Independent JPEG Group's JPEG
+ library installed. Some of the demos can make use of this if it
+ is available.])
+
+AH_TEMPLATE([HAVE_XMU],
+ [Define this if you have the Xmu library. This is standard part
+ of X, and if your vendor doesn't ship it, you should report that
+ as a bug.])
+
+AH_TEMPLATE([HAVE_GL],
+ [Define this if you have OpenGL. Some of the demos require it,
+ so if you don't have it, then those particular demos won't be
+ built. (This won't affect the screen saver as a whole.)])
+
+AH_TEMPLATE([HAVE_MESA_GL],
+ [Define this if you have OpenGL, but it's the MesaGL variant.
+ (The libraries have different names.) (HAVE_GL should be defined
+ too.)])
+
+AH_TEMPLATE([HAVE_GLBINDTEXTURE],
+ [Define this if your version of OpenGL has the glBindTexture()
+ routine. This is the case for OpenGL 1.1, but not for OpenGL
+ 1.0.])
+
+AH_TEMPLATE([HAVE_GLE],
+ [Define this if you have the -lgle and -lmatrix libraries (GL
+ extrusion.)])
+
+AH_TEMPLATE([HAVE_GLE3],[Define this if you have the -lgle from GLE version 3])
+
+AH_TEMPLATE([HAVE_JWZGLES],[Define this to target the OpenGL ES 1.x API
+ instead of OpenGL 1.3.])
+
+AH_TEMPLATE([HAVE_GLBITMAP],[Define this if glBitmap exists.])
+
+AH_TEMPLATE([HAVE_XSHM_EXTENSION],
+ [Define this if you have the X Shared Memory Extension.])
+
+AH_TEMPLATE([HAVE_DOUBLE_BUFFER_EXTENSION],
+ [Define this if you have the X Double Buffer Extension.])
+
+AH_TEMPLATE([FORTUNE_PROGRAM],
+ [Some screenhacks like to run an external program to generate
+ random pieces of text; set this to the one you like. Note that
+ this is just the default; X resources can be used to override
+ it.])
+
+AH_TEMPLATE([PASSWD_HELPER_PROGRAM],
+ [Set the name of the password helper program, if any])
+
+AH_TEMPLATE([NO_LOCKING],
+ [Define this to remove the option of locking the screen at all.])
+
+AH_TEMPLATE([ALLOW_ROOT_PASSWD],
+ [Define this to allow the root password to unlock the screen.])
+
+AH_TEMPLATE([HAVE_KERBEROS],
+ [Define this if you want to use Kerberos authentication to
+ lock/unlock the screen instead of your local password. This
+ currently uses Kerberos V4, but a V5 server with V4
+ compatibility will work. WARNING: DO NOT USE AFS string-to-key
+ passwords with this option. This option currently *only* works
+ with standard Kerberos des_string_to_key. If your password is
+ an AFS password and not a kerberos password, it will not
+ authenticate properly. See the comments in driver/kpasswd.c for
+ more information if you need it.])
+
+AH_TEMPLATE([HAVE_KERBEROS5],
+ [Define this if you have Kerberos 5, meaning we need to use the
+ Kerberos 4 compatibility layer.])
+
+AH_TEMPLATE([HAVE_PAM],
+ [Define this if you want to use PAM (Pluggable Authentication
+ Modules) to lock/unlock the screen, instead of standard
+ /etc/passwd authentication.])
+
+AH_TEMPLATE([PAM_SERVICE_NAME],
+ [If PAM is being used, this is the name of the PAM service that
+ xscreensaver will authenticate as. The default is
+ "xscreensaver", which means that the PAM library will look for
+ an "xscreensaver" line in /etc/pam.conf, or (on recent Linux
+ systems) will look for a file called /etc/pam.d/xscreensaver.
+ Some systems might already have a PAM installation that is
+ configured for xlock, so setting this to "xlock" would also work
+ in that case.])
+
+AH_TEMPLATE([HAVE_PAM_FAIL_DELAY],
+ [Define this if you have pam_fail_delay function.
+ see driver/passwd-pam.c.])
+
+AH_TEMPLATE([PAM_CHECK_ACCOUNT_TYPE],
+ [Whether PAM should check the result of account modules
+ when authenticating. Only do this if you have account
+ configured properly on your system.])
+
+AH_TEMPLATE([PAM_STRERROR_TWO_ARGS],
+ [Define if you have PAM and pam_strerror() requires two
+ arguments.])
+
+AH_TEMPLATE([HAVE_SIGTIMEDWAIT],
+ [Define to 1 if you have the `sigtimedwait' function.])
+
+AH_TEMPLATE([HAVE_SHADOW_PASSWD],
+ [Define this if your system uses 'shadow' passwords, that is, the
+ passwords live in /etc/shadow instead of /etc/passwd, and one
+ reads them with getspnam() instead of getpwnam(). (Note that
+ SCO systems do some random other thing; others might as well.
+ See the ifdefs in driver/passwd-pwent.c if you're having trouble
+ related to reading passwords.)])
+
+AH_TEMPLATE([HAVE_ENHANCED_PASSWD],
+ [Define this if your system is Digital or SCO Unix with so-called
+ ``Enhanced Security'', that is, the passwords live in
+ /tcb/files/auth/<x>/<xyz> instead of in /etc/passwd, and one
+ reads them with getprpwnam() instead of getpwnam().])
+
+AH_TEMPLATE([HAVE_ADJUNCT_PASSWD],
+ [Define this if your system is Solaris with ``adjunct'' passwords
+ (this is the version where one gets at the passwords with
+ getpwanam() instead of getpwnam().) I haven't tested this one,
+ let me know if it works.])
+
+AH_TEMPLATE([HAVE_HPUX_PASSWD],
+ [Define this if you are running HPUX with so-called ``Secure
+ Passwords'' (if you have /usr/include/hpsecurity.h, you probably
+ have this.) I haven't tested this one, let me know if it works.])
+
+AH_TEMPLATE([HAVE_SYSLOG],
+ [Define this if you the openlog(), syslog(), and closelog()
+ functions. This is used for logging failed login attempts.])
+
+AH_TEMPLATE([HAVE_ICMP],
+ [Define this if you do pings with a `struct icmp' and an
+ `icmp_id' slot.])
+
+AH_TEMPLATE([HAVE_ICMPHDR],
+ [Define this if you do pings with a `struct icmphdr' and an
+ `un.echo.id' slot.])
+
+AH_TEMPLATE([HAVE_GETIFADDRS],
+ [Define this if you have the getifaddrs() function.])
+
+AH_TEMPLATE([HAVE_FORKPTY],
+ [Define this if you have the 'forkpty' function:
+ This allows 'phosphor' and 'apple2' to run curses-based
+ programs, or be used as terminal windows.])
+
+AH_TEMPLATE([HAVE_GETTIMEOFDAY],
+ [Define this if you have the gettimeofday function.])
+
+AH_TEMPLATE([GETTIMEOFDAY_TWO_ARGS],
+ [Define this if gettimeofday() takes two arguments.])
+
+AH_TEMPLATE([XPointer],
+ [Define this to void* if you're using X11R4 or earlier.])
# After checking to see that --srcdir is correct (which AC_INIT does)
# check for some random other files that come later in the tar file,
fi
done
-
###############################################################################
#
# Function to figure out how to run the compiler.
[AC_PROG_CC
if test -z "$GCC"; then
+ # not using GCC
AC_MSG_CHECKING(how to request ANSI compilation)
case "$host" in
*-hpux* )
AC_MSG_RESULT(AIX: adding -qlanglvl=ansi -qhalt=e)
CC="$CC -qlanglvl=ansi -qhalt=e"
;;
-
*-dec-* )
- AC_MSG_RESULT(DEC: adding -std1)
+ AC_MSG_RESULT(DEC: adding -std1 -ieee)
CC="$CC -std1"
;;
-
*)
AC_MSG_RESULT(no idea)
;;
esac
+ else
+ # using GCC
+ case "$host" in
+ *-solaris*)
+ AC_MSG_RESULT(Solaris: adding -D__EXTENSIONS__)
+ CC="$CC -D__EXTENSIONS__"
+ ;;
+ esac
fi
+ OBJCC="$CC"
+
AC_MSG_CHECKING([whether the compiler works on ANSI C])
AC_TRY_RUN([ main(int ac, char **av) { return 0; } ],
AC_MSG_RESULT(yes),
if test -n "$GCC"; then
AC_MSG_RESULT(Turning on gcc compiler warnings.)
- CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"
- AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
- CC="$CC -Wp,-lang-c89"
+ CC="$CC -pedantic -Wall -Wstrict-prototypes -Wnested-externs -Wmissing-prototypes"
+ OBJCC="$OBJCC -Wall"
+ # As of gcc 3.4, we have "-Wdeclaration-after-statement"
+ # and so perhaps now we can do without -pedantic?
else
case "$host" in
*-irix5* |*-irix6.[0-3]* )
])
+###############################################################################
+#
+# Check for availability of various gcc command-line options.
+#
+###############################################################################
+
+AC_DEFUN(AC_CHECK_GCC_ARG,
+ [if test -n "$GCC"; then
+ AC_CACHE_CHECK([whether gcc accepts [$2]],
+ ac_cv_gcc_accepts_[$1],
+ [rm -rf conftest.$ac_ext
+ touch conftest.$ac_ext
+ if ( ( gcc -c [$2] conftest.$ac_ext -o/dev/null >/dev/null ) 2>&1 | \
+ grep unrecognized >/dev/null ); then
+ ac_cv_gcc_accepts_[$1]=no
+ else
+ ac_cv_gcc_accepts_[$1]=yes
+ CC="$CC [$2]"
+ fi])
+ ac_gcc_accepts_[$1]="$ac_cv_gcc_accepts_[$1]"
+ fi
+])
+
+AC_DEFUN(AC_NO_LONG_STRING_WARNINGS,
+ [AC_CHECK_GCC_ARG(no_overlength, -Wno-overlength-strings)])
+
+AC_DEFUN(AC_NO_MISPLACED_DECLARATIONS,
+ [AC_CHECK_GCC_ARG(no_decl_after, -Wdeclaration-after-statement)])
+
+# Need to disable Objective C extensions in ANSI C on MacOS X to work
+# around an Apple-specific gcc bug.
+#
+AC_DEFUN(AC_NO_OBJECTIVE_C,
+ [AC_CHECK_GCC_ARG(no_cpp_precomp, -no-cpp-precomp)])
+
+###############################################################################
+#
+# Function to figure out how to disable // comments in ANSI C code.
+#
+# (With recent gcc, this is done with "-std=c89". With older gcc, this
+# is done by passing "-lang-c89" to cpp, by passing "-Wp,-lang-c89" to
+# gcc. Old gcc doesn't support -std, and new gcc doesn't support -lang.
+# so much for compatibility!)
+#
+# UPDATE: apparently there is NO WAY to tell gcc 3.2.2 to require that
+# declarations preceed statements, without resorting to "-pedantic".
+# This means that there is no way to get gcc3 to issue warnings that
+# ensure that your code complies with the ANSI/ISO C89 standard, without
+# also drowning in totally useless warnings. Thank you master may I
+# have another.
+#
+# So, I give up, let's just use -pedantic.
+#
+###############################################################################
+
+AC_DEFUN(AC_GCC_ACCEPTS_STD, [
+ case "$host" in
+ *-darwin* )
+ # Fucking Apple let // comments sneak into OpenGL headers, so
+ # we *must* allow // comments when compiling on Mac OS 10.6! FUCK!
+ ;;
+ *)
+ AC_CHECK_GCC_ARG(std, -std=c89)
+ ;;
+ esac
+])
+
+AC_DEFUN(AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE,
+ [if test -n "$GCC"; then
+ AC_GCC_ACCEPTS_STD
+ AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
+ #
+ # The reason that // comments are banned from xscreensaver is that gcc is
+ # basically the only compiler in the world that supports them in C code.
+ # All other vendors support them only in their C++ compilers, not in their
+ # ANSI C compilers. This means that it's a portability problem: every time
+ # these comments have snuck into the xscreensaver source code, I've gotten
+ # complaints about it the next day. So we turn off support for them in gcc
+ # as well to prevent them from accidentially slipping in.
+ #
+ if test "$ac_gcc_accepts_std" = yes ; then
+ #
+ # -std=c89 defines __STRICT_ANSI__, which we don't want.
+ # (That appears to be the only additional preprocessor symbol
+ # it defines, in addition to the syntax changes it makes.)
+ #
+ # -std=gnu89 is no good, because // comments were a GNU extension
+ # before they were in the ANSI C 99 spec... (gcc 2.96 permits //
+ # with -std=gnu89 but not with -std=c89.)
+ #
+ # $CC already contains "-std=c89" via AC_GCC_ACCEPTS_STD
+ CC="$CC -U__STRICT_ANSI__"
+# else
+# # The old way:
+# CC="$CC -Wp,-lang-c89"
+ fi
+ fi
+])
+
+
###############################################################################
#
# Function to figure out how to create directory trees.
###############################################################################
AC_DEFUN(AC_PROG_INSTALL_DIRS,
- [AC_CACHE_CHECK([whether \"\${INSTALL} -d\" creates intermediate directories],
+ [AC_CACHE_CHECK([whether "\${INSTALL} -d" creates intermediate directories],
ac_cv_install_d_creates_dirs,
[ac_cv_install_d_creates_dirs=no
rm -rf conftestdir
if mkdir conftestdir; then
- cd conftestdir >&-
- ${INSTALL} -d `pwd`/dir1/dir2 >&- 2>&-
+ cd conftestdir 2>/dev/null
+ ${INSTALL} -d `pwd`/dir1/dir2 >/dev/null 2>&1
if test -d dir1/dir2/. ; then
ac_cv_install_d_creates_dirs=yes
fi
- cd .. >&-
+ cd .. 2>/dev/null
rm -rf conftestdir
fi
])
if test "$ac_cv_install_d_creates_dirs" = no ; then
- AC_CACHE_CHECK([whether \"mkdir -p\" creates intermediate directories],
+ AC_CACHE_CHECK([whether "mkdir -p" creates intermediate directories],
ac_cv_mkdir_p_creates_dirs,
[ac_cv_mkdir_p_creates_dirs=no
rm -rf conftestdir
if mkdir conftestdir; then
- cd conftestdir >&-
- mkdir -p dir1/dir2 >&- 2>&-
+ cd conftestdir 2>/dev/null
+ mkdir -p dir1/dir2 >/dev/null 2>&1
if test -d dir1/dir2/. ; then
ac_cv_mkdir_p_creates_dirs=yes
fi
- cd .. >&-
+ cd .. 2>/dev/null
rm -rf conftestdir
fi
])
])
+###############################################################################
+#
+# Function to demand "bc". Losers.
+#
+###############################################################################
+
+AC_DEFUN(AC_DEMAND_BC,
+ [ac_bc_result=`echo 6+9 | bc 2>/dev/null`
+ AC_MSG_CHECKING([for bc])
+ if test "$ac_bc_result" = "15" ; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ echo ''
+ AC_MSG_ERROR([Your system doesn't have \"bc\", which has been a standard
+ part of Unix since the 1970s. Come back when your vendor
+ has grown a clue.])
+ fi
+ ])
+
###############################################################################
#
# Functions to check how to do ICMP PING requests.
i.icmp_id = 0;
i.icmp_seq = 0;
si.sin_family = AF_INET;
- ip.ip_hl = 0;],
+ #if defined(__DECC) || defined(_IP_VHL)
+ ip.ip_vhl = 0;
+ #else
+ ip.ip_hl = 0;
+ #endif
+ ],
[ac_cv_have_icmp=yes],
[ac_cv_have_icmp=no])])
if test "$ac_cv_have_icmp" = yes ; then
struct ip ip;
i.type = ICMP_ECHO;
i.code = 0;
- i.cksum = 0;
+ i.checksum = 0;
i.un.echo.id = 0;
i.un.echo.sequence = 0;
si.sin_family = AF_INET;
AC_DEFUN(AC_PATH_X_APP_DEFAULTS_XMKMF,[
rm -fr conftestdir
if mkdir conftestdir; then
- cd conftestdir >&-
+ cd conftestdir 2>/dev/null
# Make sure to not put "make" in the Imakefile rules, since we grep it out.
cat > Imakefile <<'EOF'
acfindx:
@echo 'ac_x_app_defaults="${XAPPLOADDIR}"'
EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ if (xmkmf) >/dev/null 2>&1 && test -f Makefile; then
# GNU make sometimes prints "make[1]: Entering...", which'd confuse us.
eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
fi
- cd .. >&-
+ cd .. 2>/dev/null
rm -fr conftestdir
fi])
+###############################################################################
+#
+# Handle the --with-x-app-defaults option HERE
+#
+###############################################################################
+
+AC_ARG_WITH(x-app-defaults,[],
+ [ac_cv_x_app_defaults="$withval"],
+ [eval ac_x_app_defaults="$withval"])
+
+
AC_DEFUN(AC_PATH_X_APP_DEFAULTS_DIRECT,[
# Look for the directory under a standard set of common directories.
# Check X11 before X11Rn because it's often a symlink to the current release.
#
for version in X11R6 X11R5 X11R4 ; do
# if either pair of directories exists...
- if test -d /usr/lib/$version || test -d /usr/contrib/$version/lib
+ if test -d /usr/include/$version || test -d /usr/contrib/$version/include
then
# if contrib exists, use it...
- if test -d /usr/contrib/$version/lib ; then
+ if test -d /usr/contrib/$version/include ; then
X_CFLAGS="$X_CFLAGS -I/usr/contrib/$version/include"
X_LIBS="$X_LIBS -L/usr/contrib/$version/lib"
fi
# if the "standard" one exists, use it.
- if test -d /usr/lib/$version ; then
+ if test -d /usr/include/$version ; then
X_CFLAGS="$X_CFLAGS -I/usr/include/$version"
X_LIBS="$X_LIBS -L/usr/lib/$version"
fi
# Now find Motif. Thanks for not making xmkmf find this by
# default, you losers.
#
- if test -d /usr/lib/Motif1.2 ; then
+ if test -d /usr/include/Motif2.1 ; then
+ X_CFLAGS="$X_CFLAGS -I/usr/include/Motif2.1"
+ X_LIBS="$X_LIBS -L/usr/lib/Motif2.1"
+ elif test -d /usr/include/Motif1.2 ; then
X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.2"
X_LIBS="$X_LIBS -L/usr/lib/Motif1.2"
- elif test -d /usr/lib/Motif1.1 ; then
+ elif test -d /usr/include/Motif1.1 ; then
X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.1"
X_LIBS="$X_LIBS -L/usr/lib/Motif1.1"
fi
# Now let's check for the pseudo-standard locations for OpenGL and XPM.
#
- if test -d /opt/Mesa/lib ; then
+ if test -d /opt/graphics/OpenGL/include ; then
+ # HP-UX 10.20 puts it here
+ X_CFLAGS="-I/opt/graphics/OpenGL/include $X_CFLAGS"
+ X_LIBS="-L/opt/graphics/OpenGL/lib $X_LIBS"
+ elif test -d /opt/Mesa/lib ; then
X_CFLAGS="-I/opt/Mesa/include $X_CFLAGS"
X_LIBS="-L/opt/Mesa/lib $X_LIBS"
fi
+
if test -d /opt/xpm/lib/X11 ; then
X_CFLAGS="-I/opt/xpm/include $X_CFLAGS"
X_LIBS="-L/opt/xpm/lib/X11 $X_LIBS"
#
if test -f /usr/dt/include/Xm/Xm.h ; then
X_CFLAGS="$X_CFLAGS -I/usr/dt/include"
- X_LIBS="$X_LIBS -L/usr/dt/lib -R:/usr/dt/lib"
+ MOTIF_LIBS="$MOTIF_LIBS -L/usr/dt/lib -R/usr/dt/lib"
# Some versions of Slowlaris Motif require -lgen. But not all. Why?
- AC_CHECK_LIB(gen, regcmp, [X_LIBS="$X_LIBS -lgen"])
+ AC_CHECK_LIB(gen, regcmp, [MOTIF_LIBS="$MOTIF_LIBS -lgen"])
+ fi
+
+ ;;
+ *-darwin*)
+
+ # On MacOS X (10.x with "fink"), many things are under /sw/.
+ #
+ if test -d /sw/include ; then
+ X_CFLAGS="-I/sw/include $X_CFLAGS"
+ X_LIBS="-L/sw/lib $X_LIBS"
fi
;;
esac])
+AC_DEFUN(AC_CHECK_GETIFADDRS,
+ [AC_CACHE_CHECK([for getifaddrs], ac_cv_have_getifaddrs,
+ [AC_TRY_COMPILE([#include <stdlib.h>
+ #include <unistd.h>
+ #include <arpa/inet.h>
+ #include <ifaddrs.h>],
+ [struct ifaddrs *ifa;
+ getifaddrs (&ifa);
+ ifa->ifa_next = 0;
+ ifa->ifa_addr->sa_family = 0;],
+ [ac_cv_have_getifaddrs=yes],
+ [ac_cv_have_getifaddrs=no])])
+ if test "$ac_cv_have_getifaddrs" = yes ; then
+ AC_DEFINE(HAVE_GETIFADDRS)
+ fi])
###############################################################################
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- AC_CHECK_HEADER([$1], [$2])
+ CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
+ AC_CHECK_HEADER([$1],[$2],[$3],[$4])
CPPFLAGS="$ac_save_CPPFLAGS"])
# Like AC_EGREP_HEADER, but it uses the already-computed -I directories.
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
AC_EGREP_HEADER([$1], [$2], [$3], [$4])
CPPFLAGS="$ac_save_CPPFLAGS"])
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
AC_TRY_COMPILE([$1], [$2], [$3], [$4])
CPPFLAGS="$ac_save_CPPFLAGS"])
# note: $X_LIBS includes $x_libraries
LDFLAGS="$LDFLAGS $X_LIBS $X_EXTRA_LIBS"
+ CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
+ LDFLAGS=`eval eval eval eval eval eval eval eval eval echo $LDFLAGS`
AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5])
CPPFLAGS="$ac_save_CPPFLAGS"
LDFLAGS="$ac_save_LDFLAGS"
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
AC_TRY_RUN([$1], [$2], [$3], [$4])
CPPFLAGS="$ac_save_CPPFLAGS"])
###############################################################################
###############################################################################
+# WTF! autoconf emits this *way* too late. Do it earlier.
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+
# random compiler setup
AC_CANONICAL_HOST
AC_PROG_CC_ANSI
+AC_NO_LONG_STRING_WARNINGS
+AC_NO_MISPLACED_DECLARATIONS
+AC_NO_OBJECTIVE_C
+AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE
AC_PROG_CPP
AC_C_CONST
AC_C_INLINE
+AC_EXEEXT
+AC_DEMAND_BC
# stuff for Makefiles
AC_PROG_INSTALL
AC_PROG_INSTALL_DIRS
AC_PROG_MAKE_SET
+# By default, autoconf sets INSTALL_SCRIPT to '${INSTALL_PROGRAM}'.
+# That's wrong: it should be set to '${INSTALL}', so that one can
+# implement the "install-strip" target properly (strip executables,
+# but do not try to strip scripts.)
+#
+INSTALL_SCRIPT='${INSTALL}'
+
# random libc stuff
AC_HEADER_STDC
AC_CHECK_HEADERS(unistd.h)
AC_HEADER_SYS_WAIT
AC_HEADER_DIRENT
AC_GETTIMEOFDAY_ARGS
-AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv)
-
-AC_CHECK_FUNCS(sigaction syslog realpath)
+AC_SYS_LARGEFILE
+AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv sbrk)
+AC_CHECK_FUNCS(sigaction syslog realpath setrlimit)
+AC_CHECK_FUNCS(setlocale)
AC_CHECK_ICMP
AC_CHECK_ICMPHDR
+AC_CHECK_GETIFADDRS
AC_CHECK_HEADERS(crypt.h sys/select.h)
AC_PROG_PERL
if test -z "$PERL" ; then
# don't let it be blank...
- PERL=/usr/local/bin/perl5
+ PERL=/usr/bin/perl
fi
AC_PATH_XTRA
if test "$have_x" != yes; then
- AC_MSG_ERROR(Couldn't find X11 headers/libs. Try \`$0 --help'.)
+ AC_MSG_ERROR(Couldn't find X11 headers/libs. Try `$0 --help'.)
fi
AC_PATH_X_APP_DEFAULTS
AC_X_RANDOM_PATHS
AC_XPOINTER
+AC_MSG_CHECKING(whether this is MacOS X)
+ ac_macosx=no
+ case "$host" in
+ *-apple-darwin* )
+ ac_macosx=yes
+ ;;
+ esac
+AC_MSG_RESULT($ac_macosx)
+
+
+###############################################################################
+#
+# Gettext support
+#
+###############################################################################
+
+AC_PROG_INTLTOOL
+GETTEXT_PACKAGE=xscreensaver
+AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE",
+ [This is the name of the gettext package to use.])
+AC_DEFINE_UNQUOTED(PACKAGE, "$GETTEXT_PACKAGE",
+ [This is the same as GETTEXT_PACKAGE, but for the glade
+ generated code.])
+AC_SUBST(GETTEXT_PACKAGE)
+
+ALL_LINGUAS="ca da de es et fi fr hu it ja ko nb nl pl pt pt_BR ru sk sv vi wa zh_CN zh_TW"
+AM_GLIB_GNU_GETTEXT
+MKINSTALLDIRS="$INSTALL_DIRS"
###############################################################################
###############################################################################
have_xmu=no
-AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes])
+AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes],,
+ [#include <stdlib.h>
+ #include <stdio.h>
+ #include <X11/Intrinsic.h>])
if test "$have_xmu" = no ; then
XMU_SRCS='$(UTILS_SRC)/xmu.c'
XMU_OBJS='$(UTILS_BIN)/xmu.o'
+ XMU_LIBS=''
else
XMU_SRCS=''
XMU_OBJS=''
- SAVER_LIBS="-lXmu $SAVER_LIBS"
- HACK_LIBS="-lXmu $HACK_LIBS"
- MOTIF_LIBS="-lXmu $MOTIF_LIBS"
- GTK_LIBS="-lXmu $GTK_LIBS"
- ATHENA_LIBS="-lXmu $ATHENA_LIBS"
- ATHENA3D_LIBS="-lXmu $ATHENA3D_LIBS"
+ XMU_LIBS='-lXmu'
AC_DEFINE(HAVE_XMU)
fi
###############################################################################
#
-# Handle the --enable-subdir option
+# Handle the --with-hackdir option
#
###############################################################################
-AC_ARG_ENABLE(subdir,[
+have_hackdir=yes
+with_hackdir_req=unspecified
+AC_ARG_WITH(hackdir,[
+
Installation options:
+ --with-hackdir=DIR Where to install the hundreds of demo executables.
+ Default: `PREFIX/libexec/xscreensaver/'],
+ [with_hackdir="$withval"; with_hackdir_req="$withval"],[with_hackdir=yes])
+
+if test x"$with_hackdir" = xyes; then
+ HACKDIR='${libexecdir}/xscreensaver'
+elif test x"$with_hackdir" = xno; then
+ HACKDIR='${bindir}'
+else
+ HACKDIR=$with_hackdir
+fi
+
+# canonicalize slashes.
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+
+# Expand HACKDIR as HACKDIR_FULL
+HACKDIR_FULL=`eval eval eval eval eval eval eval eval eval echo $HACKDIR`
+
+# This option used to be called --enable-subdir; make sure that is no longer
+# used, since configure brain-damagedly ignores unknown --enable options.
+
+obsolete_enable=
+AC_ARG_ENABLE(subdir,,[obsolete_enable=yes])
+if test -n "$obsolete_enable"; then
+ echo "error: the --enable-subdir option has been replaced with"
+ echo " the new --with-hackdir option; see \`configure --help'"
+ echo " for more information."
+ exit 1
+fi
+
- --enable-subdir=DIR Put the demo programs in a subdirectory of \`bindir',
- instead of putting them in bindir itself. You can
- specify the name of the subdirectory. For example,
- \`--exec-prefix=/usr/local --enable-subdir=demos'
- would put xscreensaver in /usr/local/bin/, and would
- put the demos in /usr/local/bin/demos/. (If DIR
- begins with /, then bindir will not be prepended.)
+###############################################################################
+#
+# Handle the --with-configdir option
+# Help for --with-x-app-defaults option added.
+#
+###############################################################################
- --disable-subdir Just put the demos in \`bindir' (this is the default.)
+have_configdir=yes
+with_configdir_req=unspecified
+AC_ARG_WITH(configdir,
+[ --with-configdir=DIR Where to install the data files that describe each
+ of the display modes to the GUI.
+ Default: `PREFIX/share/xscreensaver/config/'
+ --with-x-app-defaults=DIR
+ Where to install xscreensaver configuration file.
],
- [enable_subdir="$enableval"],[enable_subdir=no])
-if test x"$enable_subdir" = xno; then
- HACKDIR='${bindir}'
-elif test x"$enable_subdir" = xyes -o x"$enable_subdir" = x ; then
- echo "error: must be a subdirectory name: --enable-subdir=$enable_subdir"
+ [with_configdir="$withval"; with_configdir_req="$withval"],
+ [with_configdir=yes])
+
+if test x"$with_configdir" = xyes; then
+ HACK_CONF_DIR='${datadir}/xscreensaver/config'
+elif test x"$with_configdir" = xno; then
+ echo "error: must be yes, or a pathname: --with-configdir=$with_configdir"
exit 1
else
# there must be a better way than this...
- if test -z "`echo $enable_subdir | sed 's@^/.*@@'`" ; then
+ if test -z "`echo $with_configdir | sed 's@^/.*@@'`" ; then
# absolute path
- HACKDIR=$enable_subdir
+ HACK_CONF_DIR=$with_configdir
else
# relative path
- HACKDIR='${bindir}/'$enable_subdir
+ HACK_CONF_DIR="\${exec_prefix}$with_configdir"
fi
fi
-# canonicalize slashes.
-HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+
###############################################################################
#
###############################################################################
-have_sgi=no
-with_sgi_req=unspecified
-AC_ARG_WITH(sgi-ext,
-[Except where noted, all of the --with options below can also take a
-directory argument: for example, \`--with-motif=/opt/Motif'. That would
-cause /opt/Motif/include/ to be added to the -I list, and /opt/Motif/lib/
-to be added to the -L list, assuming those directories exist.
+#have_sgi=no
+#with_sgi_req=unspecified
+#AC_ARG_WITH(sgi-ext,
+#[Except where noted, all of the --with options below can also take a
+#directory argument: for example, `--with-motif=/opt/Motif'. That would
+#cause /opt/Motif/include/ to be added to the -I list, and /opt/Motif/lib/
+#to be added to the -L list, assuming those directories exist.
+#
+#By default, support for each of these options will be built in, if the
+#relevant library routines exist. At run time, they will then be used
+#only if the X server being used supports them. Each --with option has
+#a corresponding --without option, to override building support for them
+#at all.
+#
+#Screen blanking and idle-detection options:
+#
+# --with-sgi-ext Include support for the SGI SCREEN_SAVER extension.],
+# [with_sgi="$withval"; with_sgi_req="$withval"],[with_sgi=yes])
+#
+#HANDLE_X_PATH_ARG(with_sgi, --with-sgi-ext, SGI SCREEN_SAVER)
+#
+#if test "$with_sgi" = yes; then
+# AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
+# [have_sgi=yes
+# AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)],,
+# [#include <X11/Xlib.h>])
+#
+#elif test "$with_sgi" != no; then
+# echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
+# exit 1
+#fi
-By default, support for each of these options will be built in, if the
-relevant library routines exist. At run time, they will then be used
-only if the X server being used supports them. Each --with option has
-a corresponding --without option, to override building support for them
-at all.
-Screen blanking and idle-detection options:
+###############################################################################
+#
+# Check for the XIDLE server extension.
+#
+###############################################################################
- --with-sgi-ext Include support for the SGI SCREEN_SAVER extension.],
- [with_sgi="$withval"; with_sgi_req="$withval"],[with_sgi=yes])
+#have_xidle=no
+#with_xidle_req=unspecified
+#AC_ARG_WITH(xidle-ext,
+#[ --with-xidle-ext Include support for the XIDLE extension.],
+# [with_xidle="$withval"; with_xidle_req="$withval"],[with_xidle=yes])
+#
+#HANDLE_X_PATH_ARG(with_xidle, --with-xidle-ext, XIDLE)
+#
+#if test "$with_xidle" = yes; then
+# AC_CHECK_X_HEADER(X11/extensions/xidle.h,
+# [have_xidle=yes
+# AC_DEFINE(HAVE_XIDLE_EXTENSION)],,
+# [#include <X11/Xlib.h>])
+#elif test "$with_xidle" != no; then
+# echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
+# exit 1
+#fi
-HANDLE_X_PATH_ARG(with_sgi, --with-sgi-ext, SGI SCREEN_SAVER)
-if test "$with_sgi" = yes; then
- AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
- [have_sgi=yes
- AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)])
+###############################################################################
+#
+# Check for the SGI-VIDEO-CONTROL server extension.
+#
+###############################################################################
-elif test "$with_sgi" != no; then
- echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
- exit 1
-fi
+#have_sgivc=no
+#with_sgivc_req=unspecified
+#AC_ARG_WITH(sgivc-ext,
+#[ --with-sgivc-ext Include support for the SGI-VIDEO-CONTROL extension.],
+# [with_sgivc="$withval"; with_sgivc_req="$withval"],[with_sgivc=yes])
+#
+#HANDLE_X_PATH_ARG(with_sgivc, --with-sgivc-ext, SGI-VIDEO-CONTROL)
+#
+#if test "$with_sgivc" = yes; then
+#
+# # first check for XSGIvc.h
+# AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes],,
+# [#include <X11/Xlib.h>])
+#
+# # if that succeeded, then check for the -lXsgivc
+# if test "$have_sgivc" = yes; then
+# have_sgivc=no
+# AC_CHECK_X_LIB(Xsgivc, XSGIvcQueryGammaMap,
+# [have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"], [true],
+# -lXext -lX11)
+# fi
+#
+# # if that succeeded, then we've really got it.
+# if test "$have_sgivc" = yes; then
+# AC_DEFINE(HAVE_SGI_VC_EXTENSION)
+# fi
+#
+#elif test "$with_sgivc" != no; then
+# echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
+# exit 1
+#fi
###############################################################################
#
-# Check for the MIT-SCREEN-SAVER server extension.
+# Check for the DPMS server extension.
#
###############################################################################
-have_mit=no
-with_mit_req=unspecified
-AC_ARG_WITH(mit-ext,
-[ --with-mit-ext Include support for the MIT-SCREEN-SAVER extension.],
- [with_mit="$withval"; with_mit_req="$withval"],[with_mit=yes])
+have_dpms=no
+with_dpms_req=unspecified
+AC_ARG_WITH(dpms-ext,
+[ --with-dpms-ext Include support for the DPMS extension.],
+ [with_dpms="$withval"; with_dpms_req="$withval"],[with_dpms=yes])
-HANDLE_X_PATH_ARG(with_mit, --with-mit-ext, MIT-SCREEN-SAVER)
+HANDLE_X_PATH_ARG(with_dpms, --with-dpms-ext, DPMS)
-if test "$with_mit" = yes; then
- AC_CHECK_X_HEADER(X11/extensions/scrnsaver.h, [have_mit=yes])
+if test "$with_dpms" = yes; then
- # Now check to see if it's really in the library; XF86Free-3.3 ships
- # scrnsaver.h, but doesn't include the code in libXext.a, the idiots!
- #
- if test "$have_mit" = yes; then
- AC_CHECK_X_LIB(Xext, XScreenSaverRegister, [true], [have_mit=no], -lm)
-
- if test "$have_mit" = no; then
- # Fuck! Looks like XF86Free-3.3 actually puts it in XExExt instead
- # of in Xext. Thank you master, may I have another.
- AC_CHECK_X_LIB(XExExt, XScreenSaverRegister,
- [have_mit=yes; SAVER_LIBS="$SAVER_LIBS -lXExExt"],
- [true], -lX11 -lXext -lm)
- fi
+ # first check for dpms.h
+ AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes],,
+ [#include <X11/Xlib.h>
+ #include <X11/Xmd.h>])
- if test "$have_mit" = no; then
- # Double fuck! Looks like some versions of XFree86 (whichever version
- # it is that comes with RedHat Linux 2.0 -- I can't find a version
- # number) put this garbage in Xss instead of Xext. Thank you master,
- # may I have another.
- AC_CHECK_X_LIB(Xss, XScreenSaverRegister,
- [have_mit=yes; SAVER_LIBS="$SAVER_LIBS -lXss"],
- [true], -lX11 -lXext -lm)
- fi
+ # if that succeeded, then check for the DPMS code in the libraries
+ if test "$have_dpms" = yes; then
- if test "$have_mit" = yes; then
- AC_DEFINE(HAVE_MIT_SAVER_EXTENSION)
- fi
+ # first look in -lXext (this is where it is with XFree86 4.0)
+ have_dpms=no
+ AC_CHECK_X_LIB(Xext, DPMSInfo, [have_dpms=yes], [true], -lXext -lX11)
+ # if that failed, look in -lXdpms (this is where it was in XFree86 3.x)
+ if test "$have_dpms" = no; then
+ AC_CHECK_X_LIB(Xdpms, DPMSInfo,
+ [have_dpms=yes; XDPMS_LIBS="-lXdpms"], [true],
+ -lXext -lX11)
+ fi
fi
-elif test "$with_mit" != no; then
- echo "error: must be yes or no: --with-mit-ext=$with_mit"
- exit 1
-fi
-
-
-###############################################################################
-#
-# Check for the XIDLE server extension.
-#
-###############################################################################
-
-have_xidle=no
-with_xidle_req=unspecified
-AC_ARG_WITH(xidle-ext,
-[ --with-xidle-ext Include support for the XIDLE extension.],
- [with_xidle="$withval"; with_xidle_req="$withval"],[with_xidle=yes])
-HANDLE_X_PATH_ARG(with_xidle, --with-xidle-ext, XIDLE)
+ # if that succeeded, then we've really got it.
+ if test "$have_dpms" = yes; then
+ AC_DEFINE(HAVE_DPMS_EXTENSION)
+ fi
-if test "$with_xidle" = yes; then
- AC_CHECK_X_HEADER(X11/extensions/xidle.h,
- [have_xidle=yes
- AC_DEFINE(HAVE_XIDLE_EXTENSION)])
-elif test "$with_xidle" != no; then
- echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
+elif test "$with_dpms" != no; then
+ echo "error: must be yes or no: --with-dpms-ext=$with_dpms"
exit 1
fi
###############################################################################
#
-# Check for the SGI-VIDEO-CONTROL server extension.
+# Check for the XINERAMA server extension.
#
###############################################################################
-have_sgivc=no
-with_sgivc_req=unspecified
-AC_ARG_WITH(sgivc-ext,
-[ --with-sgivc-ext Include support for the SGI-VIDEO-CONTROL extension.],
- [with_sgivc="$withval"; with_sgivc_req="$withval"],[with_sgivc=yes])
+have_xinerama=no
+with_xinerama_req=unspecified
+AC_ARG_WITH(xinerama-ext,
+[ --with-xinerama-ext Include support for the XINERAMA extension.],
+ [with_xinerama="$withval"; with_xinerama_req="$withval"],[with_xinerama=yes])
-HANDLE_X_PATH_ARG(with_sgivc, --with-sgivc-ext, SGI-VIDEO-CONTROL)
+HANDLE_X_PATH_ARG(with_xinerama, --with-xinerama-ext, XINERAMA)
-if test "$with_sgivc" = yes; then
+if test "$with_xinerama" = yes; then
- # first check for XSGIvc.h
- AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes])
+ # first check for Xinerama.h
+ AC_CHECK_X_HEADER(X11/extensions/Xinerama.h, [have_xinerama=yes],,
+ [#include <X11/Xlib.h>])
- # if that succeeded, then check for the -lXsgivc
- if test "$have_sgivc" = yes; then
- have_sgivc=no
- AC_CHECK_X_LIB(Xsgivc, XSGIvcQueryGammaMap,
- [have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"], [true],
+ # if that succeeded, then check for the XINERAMA code in the libraries
+ if test "$have_xinerama" = yes; then
+
+ # first look in -lXext
+ have_xinerama=no
+ AC_CHECK_X_LIB(Xext, XineramaQueryScreens, [have_xinerama=yes], [true],
-lXext -lX11)
+
+ # if that failed, look in -lXinerama (this is where it is in XFree86 4.1.)
+ if test "$have_xinerama" = no; then
+ AC_CHECK_X_LIB(Xinerama, XineramaQueryScreens,
+ [have_xinerama=yes; XINERAMA_LIBS="-lXinerama"],
+ [true], -lXext -lX11)
+ fi
fi
# if that succeeded, then we've really got it.
- if test "$have_sgivc" = yes; then
- AC_DEFINE(HAVE_SGI_VC_EXTENSION)
+ if test "$have_xinerama" = yes; then
+ AC_DEFINE(HAVE_XINERAMA)
fi
-elif test "$with_sgivc" != no; then
- echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
+elif test "$with_xinerama" != no; then
+ echo "error: must be yes or no: --with-xinerama-ext=$with_xinerama"
exit 1
fi
###############################################################################
#
-# Check for the DPMS server extension.
+# Check for the XINPUT server extension.
#
###############################################################################
-have_dpms=no
-with_dpms_req=unspecified
-AC_ARG_WITH(dpms-ext,
-[ --with-dpms-ext Include support for the DPMS extension.],
- [with_dpms="$withval"; with_dpms_req="$withval"],[with_dpms=yes])
+have_xinput=no
+with_xinput_req=unspecified
+AC_ARG_WITH(xinput-ext,
+[ --with-xinput-ext Include support for the XInput extension.],
+ [with_xinput="$withval"; with_xinput_req="$withval"], [with_xinput=yes])
-HANDLE_X_PATH_ARG(with_dpms, --with-dpms-ext, DPMS)
+HANDLE_X_PATH_ARG(with_xinput, --with-xinput-ext, XINPUT)
-if test "$with_dpms" = yes; then
+if test "$with_xinput" = yes; then
- # first check for dpms.h
- AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes])
+ # first check for Xinput.h
+ AC_CHECK_X_HEADER(X11/extensions/XInput.h, [have_xinput=yes],,
+ [#include <X11/Xlib.h>])
- # if that succeeded, then check for the -lXdpms
- if test "$have_dpms" = yes; then
- have_dpms=no
- AC_CHECK_X_LIB(Xdpms, DPMSInfo,
- [have_dpms=yes; SAVER_LIBS="$SAVER_LIBS -lXdpms"], [true],
- -lXext -lX11)
+ # if that succeeded, then check for libXi
+ if test "$have_xinput" = yes; then
+ have_xinput=no
+ AC_CHECK_X_LIB(Xi, XListInputDevices,
+ [have_xinput=yes; SAVER_LIBS="$SAVER_LIBS -lXi"],
+ [true], -lXext -lX11)
fi
# if that succeeded, then we've really got it.
- if test "$have_dpms" = yes; then
- AC_DEFINE(HAVE_DPMS_EXTENSION)
+ if test "$have_xinput" = yes; then
+ AC_DEFINE(HAVE_XINPUT)
fi
-elif test "$with_dpms" != no; then
- echo "error: must be yes or no: --with-dpms-ext=$with_dpms"
+elif test "$with_xinput" != no; then
+ echo "error: must be yes or no: --with-xinput-ext=$with_xinput"
exit 1
fi
###############################################################################
#
-# Check for the XF86VMODE server extension.
+# Check for the XF86VMODE server extension (for virtual screens.)
#
###############################################################################
HANDLE_X_PATH_ARG(with_xf86vmode, --with-xf86vmode-ext, xf86vmode)
+VIDMODE_LIBS=""
+
if test "$with_xf86vmode" = yes; then
# first check for xf86vmode.h
- AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86vmode=yes])
+ AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86vmode=yes],,
+ [#include <X11/Xlib.h>])
# if that succeeded, then check for the -lXxf86vm
if test "$have_xf86vmode" = yes; then
have_xf86vmode=no
AC_CHECK_X_LIB(Xxf86vm, XF86VidModeGetViewPort,
- [have_xf86vmode=yes; SAVER_LIBS="$SAVER_LIBS -lXxf86vm"],
+ [have_xf86vmode=yes;
+ VIDMODE_LIBS="-lXxf86vm";
+ SAVER_LIBS="$SAVER_LIBS $VIDMODE_LIBS"],
[true], -lXext -lX11)
fi
###############################################################################
#
-# Check for HP XHPDisableReset and XHPEnableReset.
+# Check for the XF86VMODE server extension (for gamma fading.)
#
###############################################################################
-AC_EGREP_X_HEADER(XHPDisableReset, X11/XHPlib.h,
- [AC_DEFINE(HAVE_XHPDISABLERESET)
- SAVER_LIBS="-lXhp11 $SAVER_LIBS"])
+have_xf86gamma=no
+have_xf86gamma_ramp=no
+with_xf86gamma_req=unspecified
+AC_ARG_WITH(xf86gamma-ext,
+[ --with-xf86gamma-ext Include support for XFree86 gamma fading.],
+ [with_xf86gamma="$withval"; with_xf86gamma_req="$withval"],
+ [with_xf86gamma=yes])
+HANDLE_X_PATH_ARG(with_xf86gamma, --with-xf86gamma-ext, xf86gamma)
-###############################################################################
-#
-# Check for /proc/interrupts.
-#
-###############################################################################
+if test "$with_xf86gamma" = yes; then
-have_proc_interrupts=no
-with_proc_interrupts_req=unspecified
-AC_ARG_WITH(proc-interrupts,
-[ --with-proc-interrupts Include support for consulting the /proc/interrupts
- file to notice keyboard activity.],
- [with_proc_interrupts="$withval"; with_proc_interrupts_req="$withval"],
- [with_proc_interrupts=yes])
+ # first check for xf86vmode.h, if we haven't already
+ if test "$have_xf86vmode" = yes; then
+ have_xf86gamma=yes
+ else
+ AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86gamma=yes],,
+ [#include <X11/Xlib.h>])
+ fi
-if test "$with_proc_interrupts" = yes; then
+ # if that succeeded, then check for the -lXxf86vm
+ if test "$have_xf86gamma" = yes; then
+ have_xf86gamma=no
+ AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGamma,
+ [have_xf86gamma=yes],
+ [true], -lXext -lX11)
+ fi
- AC_CACHE_CHECK([whether /proc/interrupts contains keyboard data],
- ac_cv_have_proc_interrupts,
- [ac_cv_have_proc_interrupts=no
- if grep keyboard /proc/interrupts >/dev/null 2>&1 ; then
- ac_cv_have_proc_interrupts=yes
- fi
- ])
- have_proc_interrupts=$ac_cv_have_proc_interrupts
+ # check for the Ramp versions of the functions too.
+ if test "$have_xf86gamma" = yes; then
+ have_xf86gamma_ramp=no
+ AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGammaRamp,
+ [have_xf86gamma_ramp=yes],
+ [true], -lXext -lX11)
+ fi
- if test "$have_proc_interrupts" = yes; then
- AC_DEFINE(HAVE_PROC_INTERRUPTS)
+ # if those tests succeeded, then we've really got the functions.
+ if test "$have_xf86gamma" = yes; then
+ AC_DEFINE(HAVE_XF86VMODE_GAMMA)
fi
-elif test "$with_proc_interrupts" != no; then
- echo "error: must be yes or no: --with-proc-interrupts=$with_proc_interrupts"
+ if test "$have_xf86gamma_ramp" = yes; then
+ AC_DEFINE(HAVE_XF86VMODE_GAMMA_RAMP)
+ fi
+
+ # pull in the lib, if we haven't already
+ if test "$have_xf86gamma" = yes -a "$have_xf86vmode" = no; then
+ SAVER_LIBS="$SAVER_LIBS -lXxf86vm"
+ fi
+
+elif test "$with_xf86gamma" != no; then
+ echo "error: must be yes or no: --with-xf86gamma-ext=$with_xf86vmode"
exit 1
fi
###############################################################################
#
-# The --enable-locking option
+# Check for the RANDR (Resize and Rotate) server extension.
+#
+# We need this to detect when the resolution of the desktop
+# has changed out from under us (this is a newer, different
+# mechanism than the XF86VMODE virtual viewports.)
#
###############################################################################
-AC_ARG_ENABLE(locking,[
-Screen locking options:
+have_randr=no
+with_randr_req=unspecified
+AC_ARG_WITH(randr-ext,
+[ --with-randr-ext Include support for the X Resize+Rotate extension.],
+ [with_randr="$withval"; with_randr_req="$withval"],[with_randr=yes])
- --enable-locking Compile in support for locking the display.
- --disable-locking Do not allow locking at all.
-],
- [enable_locking="$enableval"],[enable_locking=yes])
-if test "$enable_locking" = yes; then
- true
-elif test "$enable_locking" = no; then
- AC_DEFINE(NO_LOCKING)
-else
- echo "error: must be yes or no: --enable-locking=$enable_locking"
- exit 1
-fi
+HANDLE_X_PATH_ARG(with_randr, --with-randr-ext, RANDR)
+if test "$with_randr" = yes; then
+ # first check for Xrandr.h
+ AC_CHECK_X_HEADER(X11/extensions/Xrandr.h, [have_randr=yes],,
+ [#include <X11/Xlib.h>])
-###############################################################################
-#
-# The --enable-vt-locking option
-#
-###############################################################################
+ # if that succeeded, then check for the XRR code in the libraries
+ if test "$have_randr" = yes; then
-#ac_vt_lockswitch=no
-#AC_ARG_ENABLE(vt-locking,[
-# --enable-vt-locking Compile in support for locking Virtual Terminals.
-# This is the default if the system supports it, and
-# if locking support is included (--enable-locking.)
-# --disable-vt-locking Do not allow locking of VTs, even if locking is
-# enabled.],
-# [enable_vt_locking="$enableval"],[enable_vt_locking=yes])
-#if test "$enable_vt_locking" = yes; then
+ # RANDR probably needs -lXrender
+ xrender_libs=
+ AC_CHECK_X_LIB(Xrender, XRenderSetSubpixelOrder,
+ [xrender_libs="-lXrender"], [true], -lXext -lX11)
+
+ # first look for RANDR in -lXext
+ have_randr=no
+ AC_CHECK_X_LIB(Xext, XRRGetScreenInfo,
+ [have_randr=yes; SAVER_LIBS="$SAVER_LIBS $xrender_libs"],
+ [true], $xrender_libs -lXext -lX11)
+
+ # if that failed, look in -lXrandr
+ if test "$have_randr" = no; then
+ AC_CHECK_X_LIB(Xrandr, XRRGetScreenInfo,
+ [have_randr=yes; SAVER_LIBS="$SAVER_LIBS -lXrandr $xrender_libs"],
+ [true], $xrender_libs -lXext -lX11)
+ fi
+ fi
+
+ # if that succeeded, then we've really got it.
+ if test "$have_randr" = yes; then
+ AC_DEFINE(HAVE_RANDR)
+
+ # Now check for version 1.2 in the same libs.
+ # Try to compile, since on MacOS 10.5.7, headers are older than libs!
+ AC_CACHE_CHECK([for XRRGetScreenResources], ac_cv_randr_12,
+ [ac_cv_randr_12=no
+ AC_TRY_X_COMPILE([#include <stdlib.h>
+ #include <X11/Xlib.h>
+ #include <X11/extensions/Xrandr.h>],
+ [XRRScreenResources *res =
+ XRRGetScreenResources (0, 0);],
+ [ac_cv_randr_12=yes],
+ [ac_cv_randr_12=no])])
+ if test "$ac_cv_randr_12" = yes ; then
+ AC_DEFINE(HAVE_RANDR_12)
+ fi
+# AC_CHECK_X_LIB(c, XRRGetOutputInfo, [AC_DEFINE(HAVE_RANDR_12)],
+# [true], $SAVER_LIBS)
+ fi
+
+
+elif test "$with_randr" != no; then
+ echo "error: must be yes or no: --with-randr-ext=$with_randr"
+ exit 1
+fi
+
+
+###############################################################################
#
-# AC_CACHE_CHECK([for the VT_LOCKSWITCH ioctl], ac_cv_vt_lockswitch,
-# [AC_TRY_COMPILE([#include <fcntl.h>
-# #include <sys/ioctl.h>
-# #include <sys/vt.h>],
-# [int x = VT_LOCKSWITCH; int y = VT_UNLOCKSWITCH;],
-# [ac_cv_vt_lockswitch=yes],
-# [ac_cv_vt_lockswitch=no])])
-# ac_vt_lockswitch=$ac_cv_vt_lockswitch
+# Check for XF86MiscSetGrabKeysState (but only bother if we are already
+# using other XF86 stuff.)
#
-#elif test "$enable_vt_locking" = no; then
-# true
-#else
-# echo "error: must be yes or no: --enable-vt-locking=$enable_vt_locking"
-# exit 1
-#fi
+###############################################################################
+
+have_xf86miscsetgrabkeysstate=no
+if test "$have_xf86gamma" = yes -o "$have_xf86vmode" = yes; then
+ AC_CHECK_X_LIB(Xxf86misc, XF86MiscSetGrabKeysState,
+ [have_xf86miscsetgrabkeysstate=yes],
+ [true], -lXext -lX11)
+ if test "$have_xf86miscsetgrabkeysstate" = yes ; then
+ SAVER_LIBS="$SAVER_LIBS -lXxf86misc"
+ AC_DEFINE(HAVE_XF86MISCSETGRABKEYSSTATE)
+ fi
+fi
+
+
+###############################################################################
#
-#if test "$ac_vt_lockswitch" = yes; then
-# AC_DEFINE(HAVE_VT_LOCKSWITCH)
-# # the VT_LOCKSWITCH ioctl can only be used when running as root.
-# # #### but it doesn't work yet, so don't worry about that for now.
-## need_setuid=yes
-#fi
+# Check for HP XHPDisableReset and XHPEnableReset.
+#
+###############################################################################
+
+AC_MSG_CHECKING([for XHPDisableReset in X11/XHPlib.h])
+AC_EGREP_X_HEADER(XHPDisableReset, X11/XHPlib.h,
+ [AC_DEFINE(HAVE_XHPDISABLERESET)
+ SAVER_LIBS="-lXhp11 $SAVER_LIBS"
+ AC_MSG_RESULT(yes)],
+ [AC_MSG_RESULT(no)])
+
+
+###############################################################################
+#
+# Check for /proc/interrupts.
+#
+###############################################################################
+
+have_proc_interrupts=no
+with_proc_interrupts_req=unspecified
+AC_ARG_WITH(proc-interrupts,
+[ --with-proc-interrupts Include support for consulting the /proc/interrupts
+ file to notice keyboard activity.],
+ [with_proc_interrupts="$withval"; with_proc_interrupts_req="$withval"],
+ [with_proc_interrupts=yes])
+
+if test "$with_proc_interrupts" = yes; then
+
+ # Note that we may be building in an environment (e.g. Debian buildd chroot)
+ # without a proper /proc filesystem. If /proc/interrupts exists, then we'll
+ # check that it has the bits we need, but otherwise we'll just go on faith.
+ #
+ have_proc_interrupts=yes
+
+ if test -f /proc/interrupts; then
+ AC_CACHE_CHECK([whether /proc/interrupts contains keyboard data],
+ ac_cv_have_proc_interrupts,
+ [ac_cv_have_proc_interrupts=no
+ if grep 'keyboard\|i8042' /proc/interrupts >/dev/null 2>&1 ; then
+ ac_cv_have_proc_interrupts=yes
+ fi
+ ])
+ have_proc_interrupts=$ac_cv_have_proc_interrupts
+ fi
+
+ if test "$have_proc_interrupts" = yes; then
+ AC_DEFINE(HAVE_PROC_INTERRUPTS)
+ fi
+
+elif test "$with_proc_interrupts" != no; then
+ echo "error: must be yes or no: --with-proc-interrupts=$with_proc_interrupts"
+ exit 1
+fi
+
+
+###############################################################################
+#
+# The --enable-locking option
+#
+###############################################################################
+
+AC_ARG_ENABLE(locking,[Screen locking options:
+ --enable-locking Compile in support for locking the display.
+ --disable-locking Do not allow locking at all.],
+ [enable_locking="$enableval"],
+ [if test "$ac_macosx" = yes; then
+ # We can't lock on MacOS X, so default to not compiling in support for it.
+ # But allow --enable-locking to override that, so I can debug Linux locking
+ # under MacOS X11.
+ enable_locking=no
+ else
+ enable_locking=yes
+ fi])
+if test "$enable_locking" = yes; then
+ true
+elif test "$enable_locking" = no; then
+ AC_DEFINE(NO_LOCKING)
+else
+ echo "error: must be yes or no: --enable-locking=$enable_locking"
+ exit 1
+fi
+###############################################################################
+#
+# Whether to allow root password to unblank.
+#
+###############################################################################
+AC_ARG_ENABLE(root-passwd, [
+ --enable-root-passwd Allow root passwd to unlock screen.
+ --disable-root-passwd Do not allow that.],
+ [enable_root_passwd="$enableval"],[enable_root_passwd=yes])
+if test "$enable_root_passwd" = yes; then
+ AC_DEFINE(ALLOW_ROOT_PASSWD)
+ true
+elif test "$enable_root_passwd" != no; then
+ echo "error: must be yes or no: --enable-root-passwd=$enable_root_passwd"
+ exit 1
+fi
###############################################################################
#
[ --with-pam Include support for PAM (Pluggable Auth Modules.)],
[with_pam="$withval"; with_pam_req="$withval"],[with_pam=$with_pam_default])
+AC_ARG_WITH([pam_service_name],
+ AC_HELP_STRING([--with-pam-service-name],
+ [NAME arg is the name of the PAM service that
+ xscreensaver will authenticate as.]),
+ [pam_service_name="$withval"],[pam_service_name="xscreensaver"])
+
+AC_ARG_ENABLE(pam-check-account-type,
+ [AC_HELP_STRING([--enable-pam-check-account-type],
+ [Whether PAM should check the result of account
+ modules when authenticating. Only do this if you
+ have account configured properly on your system.])],
+ [enable_pam_check_account_type="$enableval"],[enable_pam_check_account_type=no])
+if test "$enable_pam_check_account_type" = yes ; then
+ AC_DEFINE(PAM_CHECK_ACCOUNT_TYPE)
+ true
+elif test "$enable_pam_check_account_type" != no ; then
+ echo "error: must be yes or no: --enable-pam-check-account-type=$enable_pam_check_account_type"
+ exit 1
+fi
+
HANDLE_X_PATH_ARG(with_pam, --with-pam, PAM)
if test "$enable_locking" = yes -a "$with_pam" = yes; then
if test "$ac_cv_pam" = yes ; then
have_pam=yes
AC_DEFINE(HAVE_PAM)
+ AC_DEFINE_UNQUOTED(PAM_SERVICE_NAME,"$pam_service_name")
+
PASSWD_LIBS="${PASSWD_LIBS} -lpam"
# libpam typically requires dlopen and dlsym. On FreeBSD,
# those are in libc. On Linux and Solaris, they're in libdl.
AC_CHECK_LIB(dl, dlopen, [PASSWD_LIBS="${PASSWD_LIBS} -ldl"])
+ # On Linux, sigtimedwait() is in libc; on Solaris, it's in librt.
+ have_timedwait=no
+ AC_CHECK_LIB(c, sigtimedwait,
+ [have_timedwait=yes
+ AC_DEFINE(HAVE_SIGTIMEDWAIT)])
+ if test "$have_timedwait" = no ; then
+ AC_CHECK_LIB(rt, sigtimedwait, [have_timedwait=yes
+ AC_DEFINE(HAVE_SIGTIMEDWAIT)
+ PASSWD_LIBS="${PASSWD_LIBS} -lrt"])
+ fi
+
AC_MSG_CHECKING(how to call pam_strerror)
AC_CACHE_VAL(ac_cv_pam_strerror_args,
- [AC_TRY_COMPILE([#include <stdio.h>
- #include <stdlib.h>
- #include <security/pam_appl.h>],
- [pam_handle_t *pamh = 0;
- char *s = pam_strerror(pamh, PAM_SUCCESS);],
- [ac_pam_strerror_args=2],
- [AC_TRY_COMPILE([#include <stdio.h>
- #include <stdlib.h>
- #include <security/pam_appl.h>],
- [char *s =
- pam_strerror(PAM_SUCCESS);],
- [ac_pam_strerror_args=1],
- [ac_pam_strerror_args=0])])
+ [AC_TRY_X_COMPILE([#include <stdio.h>
+ #include <stdlib.h>
+ #include <security/pam_appl.h>],
+ [pam_handle_t *pamh = 0;
+ char *s = pam_strerror(pamh, PAM_SUCCESS);],
+ [ac_pam_strerror_args=2],
+ [AC_TRY_X_COMPILE([#include <stdio.h>
+ #include <stdlib.h>
+ #include <security/pam_appl.h>],
+ [char *s =
+ pam_strerror(PAM_SUCCESS);],
+ [ac_pam_strerror_args=1],
+ [ac_pam_strerror_args=0])])
ac_cv_pam_strerror_args=$ac_pam_strerror_args])
ac_pam_strerror_args=$ac_cv_pam_strerror_args
if test "$ac_pam_strerror_args" = 1 ; then
else
AC_MSG_RESULT(unknown)
fi
+
+# Check pam_fail_delay
+ AC_MSG_CHECKING(pam_fail_delay in -lpam)
+ AC_CACHE_VAL(ac_cv_pam_fail_delay,
+ [ac_save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="-lpam"
+ AC_TRY_LINK([#include <security/pam_appl.h>],
+ [pam_handle_t *pamh = 0;
+ unsigned int usec = 1;
+ int status = pam_fail_delay (pamh, usec);],
+ [ac_pam_fail_delay=yes],
+ [ac_pam_fail_delay=no])
+ ac_cv_pam_fail_delay=$ac_pam_fail_delay,
+ LDFLAGS=$ac_save_LDFLAGS])
+
+ if test "$ac_pam_fail_delay" = yes ; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(HAVE_PAM_FAIL_DELAY)
+ else
+ AC_MSG_RESULT(no)
+ fi
+
fi
fi
###############################################################################
have_kerberos=no
+have_kerberos5=no
with_kerberos_req=unspecified
AC_ARG_WITH(kerberos,
HANDLE_X_PATH_ARG(with_kerberos, --with-kerberos, Kerberos)
if test "$enable_locking" = yes -a "$with_kerberos" = yes; then
- AC_CACHE_CHECK([for Kerberos], ac_cv_kerberos,
+ AC_CACHE_CHECK([for Kerberos 4], ac_cv_kerberos,
[AC_TRY_X_COMPILE([#include <krb.h>],,
[ac_cv_kerberos=yes],
[ac_cv_kerberos=no])])
+ AC_CACHE_CHECK([for Kerberos 5], ac_cv_kerberos5,
+ [AC_TRY_X_COMPILE([#include <kerberosIV/krb.h>],,
+ [ac_cv_kerberos5=yes],
+ [ac_cv_kerberos5=no])])
+
if test "$ac_cv_kerberos" = yes ; then
have_kerberos=yes
AC_DEFINE(HAVE_KERBEROS)
+ fi
+
+ if test "$ac_cv_kerberos5" = yes ; then
+
+ # Andrew Snare <ajs@pigpond.com> wrote:
+ #
+ # You were assuming that if kerberosV (krb5) was found, then kerberosIV
+ # (krb4) was also available. This turns out not to be the case with
+ # mit-krb-1.2.7; apparently backwards-compatibility with KerberosIV
+ # is optional.
+ #
+ # So, disable kerberosV support if libkrb4 can't be found.
+ # This is not the best solution, but it makes the compile not fail.
+ #
+ AC_CHECK_X_LIB(krb4, krb_get_tf_realm,
+ [have_kerberos=yes],
+ [have_kerberos=no])
+ if test "$have_kerberos" = yes ; then
+ have_kerberos5=yes
+ AC_DEFINE(HAVE_KERBEROS)
+ AC_DEFINE(HAVE_KERBEROS5)
+ else
+ have_kerberos5=no
+ AC_MSG_WARN([Cannot find compat lib (libkrb4) needed to use Kerberos 5])
+ fi
+
+ fi
+
+ if test "$have_kerberos5" = yes ; then
+ # from Matt Knopp <mhat@infocalypse.netlag.com>
+ # (who got it from amu@mit.edu)
+
+ PASSWD_LIBS="$PASSWD_LIBS -lkrb4 -ldes425 -lkrb5 -lk5crypto -lcom_err"
+
+ # jwz: MacOS X uses -lkrb5, but not -lcrypt
+ AC_CHECK_X_LIB(crypt, crypt, [PASSWD_LIBS="$PASSWD_LIBS -lcrypt"])
+
+ elif test "$have_kerberos" = yes ; then
+ # from Tim Showalter <tjs@psaux.com> for FreeBSD 4.2
+ PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes -lcom_err"
+ fi
- # from Tim Showalter <tjs+@andrew.cmu.edu>
- PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes"
+ if test "$have_kerberos" = yes ; then
AC_CHECK_FUNC(res_search,,
AC_CHECK_LIB(resolv,res_search,PASSWD_LIBS="${PASSWD_LIBS} -lresolv",
AC_MSG_WARN([Can't find DNS resolver libraries needed for Kerberos])
))
-
fi
fi
###############################################################################
#
-# Check for -lXm.
+# Check for external password helper
+# On SuSE, instead of having xscreensaver be a setuid program, they
+# fork an external program that takes the password on stdin, and
+# returns true if that password is a valid one. Then only that
+# smaller program needs to be setuid.
+#
+# (Note that this external program is not a GUI: the GUI is still
+# all in xscreensaver itself; the external program just does auth.)
#
###############################################################################
-have_motif=no
-with_motif_req=unspecified
-AC_ARG_WITH(motif,[
-User interface options:
+have_passwd_helper=no
+with_passwd_helper_req=unspecified
- --with-motif Use the Motif toolkit for the user interface.],
- [with_motif="$withval"; with_motif_req="$withval"],[with_motif=yes])
+AC_ARG_WITH(passwd-helper,
+[ --with-passwd-helper Include support for an external password
+ verification helper program.],
+ [with_passwd_helper="$withval"; with_passwd_helper_req="$withval"],[with_passwd_helper=no])
+# no HANDLE_X_PATH_ARG for this one
-HANDLE_X_PATH_ARG(with_motif, --with-motif, Motif)
+if test "$enable_locking" = no ; then
+ with_passwd_helper_req=no
+ with_passwd_helper=no
+fi
-if test "$with_motif" != yes -a "$with_motif" != no ; then
- echo "error: must be yes or no: --with-motif=$with_motif"
- exit 1
+case "$with_passwd_helper" in
+ ""|no) : ;;
+ /*)
+ AC_DEFINE_UNQUOTED(PASSWD_HELPER_PROGRAM, "$with_passwd_helper")
+ have_passwd_helper=yes;;
+ *)
+ echo "error: --with-passwd-helper needs full pathname of helper (not '$with_passwd_helper')." >&2
+ exit 1
+esac
+
+
+###############################################################################
+#
+# Check for a login manager for a "New Login" button on the lock dialog.
+# Usually this will be "/usr/bin/gdmflexiserver".
+#
+###############################################################################
+
+with_login_manager_req=unspecified
+default_login_manager_1='gdmflexiserver -ls'
+default_login_manager_2='kdmctl reserve'
+
+AC_ARG_WITH(login-manager,
+[ --with-login-manager Put a "New Login" button on the unlock dialog that
+ runs a login manager like gdmflexiserver or kdmctl.],
+ [with_login_manager="$withval"; with_login_manager_req="$withval"],
+ [with_login_manager=yes])
+# no HANDLE_X_PATH_ARG for this one
+
+if test "$enable_locking" = no ; then
+ with_login_manager_req=no
+ with_login_manager=no
fi
-if test "$with_motif" = yes; then
- have_motif=no
- AC_CHECK_X_HEADER(Xm/Xm.h,
- [have_motif=yes
- AC_DEFINE(HAVE_MOTIF)
- MOTIF_LIBS="$MOTIF_LIBS -lXm"])
+case "$with_login_manager_req" in
+ no)
+ with_login_manager=""
+ ;;
+
+ yes|unspecified)
+ # Try both defaults, use the one that exists.
+
+ set dummy $default_login_manager_1 ; login_manager_tmp=$2
+ unset ac_cv_path_login_manager_tmp # don't cache
+ AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
+ if test ! -z "$login_manager_tmp" ; then
+ with_login_manager="$default_login_manager_1"
+ else
+ set dummy $default_login_manager_2 ; login_manager_tmp=$2
+ unset ac_cv_path_login_manager_tmp # don't cache
+ AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
+ if test ! -z "$login_manager_tmp" ; then
+ with_login_manager="$default_login_manager_2"
+ else
+ with_login_manager=""
+ fi
+ fi
+ ;;
+
+ /*)
+ # absolute path specified on cmd line
+ set dummy $with_login_manager_req ; login_manager_tmp=$2
+ AC_MSG_CHECKING([for $login_manager_tmp])
+ if test -x "$login_manager_tmp" ; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ with_login_manager=""
+ fi
+ ;;
+
+ *)
+ # relative path specified on cmd line
+ set dummy $with_login_manager_req ; login_manager_tmp=$2
+ unset ac_cv_path_login_manager_tmp # don't cache
+ AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
+ if test -z "$login_manager_tmp" ; then
+ with_login_manager=""
+ else
+ with_login_manager="$login_manager_tmp"
+ fi
+ ;;
+esac
+ac_cv_login_manager_program="$with_login_manager"
+
+NEW_LOGIN_COMMAND_P=''
+NEW_LOGIN_COMMAND="$ac_cv_login_manager_program"
+
+AC_MSG_CHECKING(for login manager)
+if test -z "$NEW_LOGIN_COMMAND" ; then
+ NEW_LOGIN_COMMAND="$default_login_manager_1"
+ NEW_LOGIN_COMMAND_P='! '
+ AC_MSG_RESULT($NEW_LOGIN_COMMAND (disabled))
+else
+ AC_MSG_RESULT($NEW_LOGIN_COMMAND)
fi
###############################################################################
#
-# Check for -lgtk.
+# Check for -lgtk (and Gnome stuff)
#
###############################################################################
have_gtk=no
with_gtk_req=unspecified
-AC_ARG_WITH(gtk,
-[ --with-gtk Use the Gtk toolkit for the user interface.],
+AC_ARG_WITH(gtk,[
+User interface options:
+
+ --with-gtk Use the Gtk toolkit for the user interface.],
[with_gtk="$withval"; with_gtk_req="$withval"],[with_gtk=yes])
# if --with-gtk=/directory/ was specified, remember that directory so that
exit 1
fi
+
+parse_gtk_version_string() {
+ # M4 sucks!!
+ changequote(X,Y)
+ maj=`echo $ac_gtk_version_string | sed -n 's/\..*//p'`
+ min=`echo $ac_gtk_version_string | sed -n 's/[^.]*\.\([^.]*\).*/\1/p'`
+ changequote([,])
+ ac_gtk_version=`echo "$maj * 1000 + $min" | bc`
+ if test -z "$ac_gtk_version"; then
+ ac_gtk_version=unknown
+ ac_gtk_version_string=unknown
+ fi
+}
+
+# Find pkg-config... (need this for both gtk and gdk_pixbuf.)
+# if the user specified --with-gtk=/foo/ then look there.
+#
+gtk_path="$PATH"
+if test ! -z "$gtk_dir"; then
+ # canonicalize slashes.
+ foo=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
+ gtk_path="$foo:$gtk_path"
+fi
+
+AC_PATH_PROGS(pkg_config, pkg-config,, $gtk_path)
+
+if test -z "$pkg_config" ; then
+ AC_MSG_WARN([pkg-config not found!])
+ pkg_config="false"
+fi
+
+
+# Utility function for running pkg-config-based tests...
+#
+pkgs=''
+pkg_check_version() {
+ if test "$ok" = yes ; then
+ req="$1"
+ min="$2"
+ AC_MSG_CHECKING(for $req)
+ if $pkg_config --exists "$req" ; then
+ vers=`$pkg_config --modversion "$req"`
+ if $pkg_config --exists "$req >= $min" ; then
+ AC_MSG_RESULT($vers)
+ pkgs="$pkgs $req"
+ return 1
+ else
+ AC_MSG_RESULT($vers (wanted >= $min))
+ ok=no
+ return 0
+ fi
+ else
+ AC_MSG_RESULT(no)
+ ok=no
+ return 0
+ fi
+ fi
+}
+
+
jurassic_gtk=no
+gtk_halfassed=no
+
if test "$with_gtk" = yes; then
have_gtk=no
- # if the user specified --with-gtk=/foo/ then look in /foo/bin/
- # for glib-config and gtk-config.
- #
- gtk_path="$PATH"
-
- if test ! -z "$gtk_dir"; then
- # canonicalize slashes.
- gtk_dir=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
- gtk_path="$gtk_dir:$gtk_dir:$gtk_path"
+ ok="yes"
+ pkg_check_version gtk+-2.0 2.0.1 ; ac_gtk_version_string="$vers"
+ pkg_check_version gmodule-2.0 2.0.0
+ pkg_check_version libxml-2.0 2.4.6
+ pkg_check_version libglade-2.0 1.99.0
+ pkg_check_version gdk-pixbuf-2.0 2.0.0
+ pkg_check_version gdk-pixbuf-xlib-2.0 2.0.0
+ have_gtk="$ok"
+
+ if test "$have_gtk" = no; then
+ if test -n "$ac_gtk_version_string" ; then
+ gtk_halfassed="$ac_gtk_version_string"
+ gtk_halfassed_lib="$req"
+ fi
fi
- AC_PATH_PROGS(glib_config, glib-config,, $gtk_path)
- AC_PATH_PROGS(gtk_config, gtk-config,, $gtk_path)
-
- if test -n "$glib_config" -a -n "gtk_config" ; then
- have_gtk=yes
- fi
if test "$have_gtk" = yes; then
- AC_CACHE_CHECK([Gtk version number], ac_cv_gtk_version_string,
- [ac_cv_gtk_version_string=`$glib_config --version`])
- ac_gtk_version_string=$ac_cv_gtk_version_string
- # M4 sucks!!
- changequote(X,Y)
- maj=`echo $ac_gtk_version_string | sed -n 's/\..*//p'`
- min=`echo $ac_gtk_version_string | sed -n 's/[^.]*\.\([^.]*\).*/\1/p'`
- changequote([,])
- ac_gtk_version=`echo "$maj * 1000 + $min" | bc`
- if test -z "$ac_gtk_version"; then
- ac_gtk_version=unknown
- ac_gtk_version_string=unknown
- fi
- if test "$ac_gtk_version" = "unknown" || test "$ac_gtk_version" -lt 1002
- then
- have_gtk=no
- jurassic_gtk=yes
- fi
+ parse_gtk_version_string
+ jurassic_gtk=no
fi
+
if test "$have_gtk" = yes; then
AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
- [ac_cv_gtk_config_cflags=`$gtk_config --cflags`])
+ [ac_cv_gtk_config_cflags=`$pkg_config --cflags $pkgs`])
AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
- [ac_cv_gtk_config_libs=`$gtk_config --libs`])
- INCLUDES="$INCLUDES $ac_cv_gtk_config_cflags"
- GTK_LIBS="$GTK_LIBS $ac_cv_gtk_config_libs"
+ [ac_cv_gtk_config_libs=`$pkg_config --libs $pkgs`])
+ fi
+
+ ac_gtk_config_cflags=$ac_cv_gtk_config_cflags
+ ac_gtk_config_libs=$ac_cv_gtk_config_libs
+
+ GTK_EXTRA_OBJS=""
+ GTK_DATADIR=""
+ if test "$have_gtk" = yes; then
+ GTK_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
+ GTK_DATADIR="$GTK_DATADIR/share"
+ fi
+
+ if test "$have_gtk" = yes; then
+ INCLUDES="$INCLUDES $ac_gtk_config_cflags"
+ GTK_LIBS="$GTK_LIBS $ac_gtk_config_libs"
AC_DEFINE(HAVE_GTK)
+ AC_DEFINE(HAVE_GTK2)
+ AC_DEFINE(HAVE_XML)
fi
+
+fi
+
+
+# Check for the various Gnome help and URL loading programs.
+#
+WITH_BROWSER=gnome-open
+if test "$have_gtk" = yes; then
+ AC_CHECK_PROGS(gnome_open_program, gnome-open)
+ AC_CHECK_PROGS(gnome_url_show_program, gnome-url-show)
fi
###############################################################################
#
-# Check for -lXaw and -lXaw3d.
+# Check for -lXm.
#
###############################################################################
-have_athena=no
-have_athena3d=no
-with_athena_req=unspecified
-AC_ARG_WITH(athena,
-[ --with-athena Use the Athena toolkit for the user interface.],
- [with_athena="$withval"; with_athena_req="$withval"],[with_athena=yes])
-
-HANDLE_X_PATH_ARG(with_athena, --with-athena, Athena)
+have_motif=no
+with_motif_req=unspecified
+AC_ARG_WITH(motif,[ --with-motif Use the Motif toolkit for the user interface
+ (no longer supported.)],
+ [with_motif="$withval"; with_motif_req="$withval"],[with_motif=no])
+HANDLE_X_PATH_ARG(with_motif, --with-motif, Motif)
-if test "$with_athena" != yes -a "$with_athena" != no ; then
- echo "error: must be yes or no: --with-athena=$with_athena"
+if test "$with_motif" != yes -a "$with_motif" != no ; then
+ echo "error: must be yes or no: --with-motif=$with_motif"
exit 1
fi
-
-if test "$with_athena" = yes; then
- have_athena=no
- AC_CHECK_X_HEADER(X11/Xaw/Dialog.h, [have_athena=yes])
- if test "$have_athena" = yes; then
- AC_CHECK_X_LIB(Xaw3d, Xaw3dComputeTopShadowRGB,
- [have_athena=yes; have_athena3d=yes], [true],
- -lXt -lXmu -lXext -lX11)
- fi
-fi
-
-if test "$have_athena" = yes; then
- AC_DEFINE(HAVE_ATHENA)
- ATHENA_LIBS="-lXaw $ATHENA_LIBS"
-fi
-
-if test "$have_athena3d" = yes; then
- ATHENA3D_LIBS="-lXaw3d $ATHENA3D_LIBS"
+if test "$with_motif" = yes; then
+ have_motif=no
+ AC_CHECK_X_HEADER(Xm/Xm.h,
+ [have_motif=yes
+ AC_DEFINE(HAVE_MOTIF)
+ MOTIF_LIBS="$MOTIF_LIBS -lXm"],,
+ [#include <stdlib.h>
+ #include <stdio.h>
+ #include <X11/Intrinsic.h>])
fi
-# If we have Athena, check whether it's a version that includes
-# XawViewportSetCoordinates in Viewport.h (R3 (or R4?) don't.)
-if test "$have_athena" = yes ; then
- AC_CACHE_CHECK([for XawViewportSetCoordinates in Viewport.h],
- ac_cv_have_XawViewportSetCoordinates,
- [ac_cv_have_XawViewportSetCoordinates=no
- AC_EGREP_X_HEADER(XawViewportSetCoordinates,
- X11/Xaw/Viewport.h,
- ac_cv_have_XawViewportSetCoordinates=yes)])
- if test "$ac_cv_have_XawViewportSetCoordinates" = yes ; then
- AC_DEFINE(HAVE_XawViewportSetCoordinates)
- fi
+if test "$have_motif" = yes; then
+ AC_CHECK_X_HEADER(Xm/ComboBox.h, [AC_DEFINE(HAVE_XMCOMBOBOX)],,
+ [#include <stdlib.h>
+ #include <stdio.h>
+ #include <X11/Intrinsic.h>])
fi
if test "$with_gl" = yes; then
AC_CHECK_X_HEADER(GL/gl.h, have_gl=yes, have_gl=no)
if test "$have_gl" = yes ; then
- AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no)
+ AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no,
+ [#include <GL/gl.h>])
fi
# If we have the headers, try and figure out which vendor it's from.
#
AC_CACHE_CHECK([whether GL is really MesaGL], ac_cv_have_mesa_gl,
[ac_cv_have_mesa_gl=no
- AC_EGREP_X_HEADER(Mesa, GL/glx.h, [ac_cv_have_mesa_gl=yes])
- ])
+ if test "$ac_macosx" = no; then
+ # WTF! MacOS 10.5.0 ships the Mesa GL headers!
+ # It's not really Mesa, is it?
+ AC_EGREP_X_HEADER(Mesa|MESA, GL/glx.h, [ac_cv_have_mesa_gl=yes])
+ fi])
ac_have_mesa_gl=$ac_cv_have_mesa_gl
-
gl_lib_1=""
GL_LIBS=""
+ if test "$ac_macosx" = yes; then
+
+ # Without these, every link against libGL gets a bunch of useless
+ # warnings.
+ #
+ osx_crud="-bind_at_load -multiply_defined suppress"
+ AC_MSG_RESULT(adding "$osx_crud" to GL_LIBS)
+ GL_LIBS="$GL_LIBS $osx_crud"
+ unset osx_crud
+
+ # New lossage in 10.5.0: without this, we get:
+ # ld: cycle in dylib re-exports with /usr/X11/lib/libGL.dylib
+ #
+ osx_crud="/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib"
+ osx_crud="-Wl,-dylib_file,${osx_crud}:${osx_crud}"
+
+ AC_MSG_RESULT(adding "$osx_crud" to GL_LIBS)
+ GL_LIBS="$GL_LIBS $osx_crud"
+ unset osx_crud
+
+ # New lossage in 10.6.8: we can't allow -L/opt/local/lib to be in the
+ # link line, or at runtime XQueryExtension gets a segv due to some kind
+ # of library version skew. Libs must come from /usr/X11/lib even if
+ # $prefix and/or $exec_prefix are set to /opt/local/.
+ #
+ AC_MSG_RESULT(omitting "$libdir" from LDFLAGS)
+ libdir=''
+
+ fi
+
# Some versions of MesaGL are compiled to require -lpthread.
# So if the Mesa headers exist, and -lpthread exists, then always
if test "$ac_have_mesa_gl" = yes ; then
AC_CHECK_X_LIB(MesaGL, glXCreateContext,
[gl_lib_1="MesaGL"
- GL_LIBS="-lMesaGL -lMesaGLU $GL_LIBS"],
- [], -lMesaGLU $GL_LIBS -lX11 -lXext -lm)
+ GL_LIBS="-lMesaGL -lMesaGLU $VIDMODE_LIBS $GL_LIBS"],
+ [], -lMesaGLU $GL_LIBS -lX11 -lXext $VIDMODE_LIBS -lm)
fi
if test "$gl_lib_1" = "" ; then
AC_CHECK_X_LIB(GL, glXCreateContext,
[gl_lib_1="GL"
- GL_LIBS="-lGL -lGLU $GL_LIBS"],
- [], -lGLU $GL_LIBS -lX11 -lXext -lm)
+ GL_LIBS="-lGL -lGLU $VIDMODE_LIBS $GL_LIBS"],
+ [], -lGLU $GL_LIBS -lX11 -lXext $VIDMODE_LIBS -lm)
fi
if test "$gl_lib_1" = "" ; then
#line __oline__ "configure"
#include "confdefs.h"
#include <GL/gl.h>
+#ifndef MESA_MAJOR_VERSION
+# include <GL/xmesa.h>
+# ifdef XMESA_MAJOR_VERSION
+ /* Around Mesa 3.2, they took out the Mesa version number, so instead,
+ we have to check the XMesa version number (the number of the X protocol
+ support, which seems to be the same as the Mesa version number.)
+ */
+# define MESA_MAJOR_VERSION XMESA_MAJOR_VERSION
+# define MESA_MINOR_VERSION XMESA_MINOR_VERSION
+# else
+ /* Oh great. Some time after 3.4, they took out the xmesa.h header file,
+ so we have no way of telling what version of Mesa this is at all.
+ So, we'll guess that the osmesa version (the "offscreen protocol")
+ is less than or equal to the real mesa version number. Except that
+ if OSmesa is 3.3, assume at least Mesa 3.4, since OSmesa was 3.3 in
+ Mesa 3.4. And Mesa 3.3 had xmesa.h. What a complete load of shit!
+ */
+# include <GL/osmesa.h>
+# define MESA_MAJOR_VERSION OSMESA_MAJOR_VERSION
+# define MESA_MINOR_VERSION OSMESA_MINOR_VERSION or newer, probably?
+# if OSMESA_MAJOR_VERSION == 3 && OSMESA_MINOR_VERSION == 3
+# undef MESA_MINOR_VERSION
+# define MESA_MINOR_VERSION 4 or newer, probably?
+# endif
+# endif
+#endif
configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
EOF
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- # M4 sucks!!
+ mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC | grep configure:`
+
+ # M4 sucks!!
changequote(X,Y)
- mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC | sed -n \
- 's/^configure:.*\([0-9][0-9]*\).*\([0-9][0-9]*\).*$/\1.\2/p'`
+ mglv=`echo "$mglv" | sed -n \
+ 's/^configure: *\([0-9][0-9]*\) *\([0-9].*\)$/\1.\2/p'`
changequote([,])
rm -f conftest.$ac_ext
ac_mesagl_version=unknown
ac_mesagl_version_string=unknown
else
- ac_mesagl_version_string=$mglv
- maj=`echo $mglv | sed -n 's/\..*//p'`
- min=`echo $mglv | sed -n 's/.*\.//p'`
+ ac_mesagl_version_string="$mglv"
+ # M4 sucks!!
+ changequote(X,Y)
+ maj=`echo "$mglv" | sed -n 's/^\([0-9][0-9]*\)\..*$/\1/p'`
+ min=`echo "$mglv" | sed -n 's/^.*\.\([0-9][0-9]*\).*$/\1/p'`
+ changequote([,])
ac_mesagl_version=`echo "$maj * 1000 + $min" | bc`
if test -z "$ac_mesagl_version"; then
ac_mesagl_version=unknown
#
AC_CHECK_X_LIB($gl_lib_1, glBindTexture, [AC_DEFINE(HAVE_GLBINDTEXTURE)],
[true], $GL_LIBS -lX11 -lXext -lm)
+ fi
-
- # Check whether the `xscreensaver' executable should link against GL.
- # See comments in utils/visual-gl.c for why this is sometimes necessary.
- #
- AC_MSG_CHECKING(whether drastic GL measures must be taken)
- case "$host" in
- *-sgi*)
- AC_MSG_RESULT([yes -- hello, SGI.])
- AC_DEFINE(DAEMON_USE_GL)
- SAVER_GL_SRCS='$(UTILS_SRC)/visual-gl.c'
- SAVER_GL_OBJS='$(UTILS_BIN)/visual-gl.o'
- SAVER_GL_LIBS="$GL_LIBS"
- ;;
- *)
- AC_MSG_RESULT([no -- non-SGI.])
- SAVER_GL_SRCS=''
- SAVER_GL_OBJS=''
- SAVER_GL_LIBS=''
- ;;
- esac
-
- fi
-
-elif test "$with_gl" != no; then
- echo "error: must be yes or no: --with-gl=$with_gl"
- exit 1
-fi
+elif test "$with_gl" != no; then
+ echo "error: must be yes or no: --with-gl=$with_gl"
+ exit 1
+fi
###############################################################################
GLE_LIBS=""
-if test "$with_gle" = yes; then
+if test "$have_gl" = no ; then
+ true
+elif test "$with_gle" = yes; then
- AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no)
- if test "$have_gle" = yes ; then
- AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no)
+ AC_CHECK_X_HEADER(GL/gle.h, have_gle3=yes, have_gle3=no,
+ [#include <GL/gl.h>])
+ if test "$have_gle3" = yes ; then
+ have_gle=yes;
+ else
+ AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no,
+ [#include <GL/gl.h>])
+ if test "$have_gle" = yes ; then
+ AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no,
+ [#include <GL/gl.h>])
+ fi
fi
if test "$have_gle" = yes ; then
have_gle=no
gle_halfassed=yes
AC_CHECK_X_LIB(gle, gleCreateGC,
- [have_gle=yes; gle_halfassed=no, GLE_LIBS="-lgle"],
+ [have_gle=yes; gle_halfassed=no; GLE_LIBS="-lgle"],
[], $GL_LIBS -lX11 -lXext -lm)
fi
if test "$have_gle" = yes ; then
have_gle=no
gle_halfassed=yes
- AC_CHECK_X_LIB(matrix, uview_direction_d,
- [have_gle=yes; gle_halfassed=no,
- GLE_LIBS="$GLE_LIBS -lmatrix"],
- [], $GL_LIBS -lX11 -lXext -lm)
+
+ # sometimes the libmatrix stuff is included in libgle. look there first.
+#
+# I don't get it. For some reason, this test passes on SGI, as if
+# uview_direction_d() was in libgle -- but it's not, it's in libmatrix.
+# Yet the link is succeeding. Why???
+#
+# AC_CHECK_X_LIB(gle, uview_direction_d,
+# [have_gle=yes; gle_halfassed=no],
+# [], $GL_LIBS -lX11 -lXext -lm)
+
+ # As of GLE 3 this is in libgle, and has changed name to uview_direction!
+ # *sigh*
+ if test "$have_gle3" = yes ; then
+ AC_CHECK_X_LIB(gle, uview_direction,
+ [have_gle=yes; gle_halfassed=no],
+ [], $GL_LIBS -lX11 -lXext -lm)
+ fi
+ # if it wasn't in libgle, then look in libmatrix.
+ if test "$have_gle" = no ; then
+ AC_CHECK_X_LIB(matrix, uview_direction_d,
+ [have_gle=yes; gle_halfassed=no;
+ GLE_LIBS="$GLE_LIBS -lmatrix"],
+ [], $GL_LIBS -lX11 -lXext -lm)
+ fi
fi
if test "$have_gle" = yes ; then
AC_DEFINE(HAVE_GLE)
+ if test "$have_gle3" = yes ; then
+ AC_DEFINE(HAVE_GLE3)
+ fi
fi
elif test "$with_gle" != no; then
fi
+###############################################################################
+#
+# Handle --with-gles
+#
+###############################################################################
+
+with_gles_req=unspecified
+AC_ARG_WITH(gles,
+[ --with-gles Target OpenGL ES 1.x API instead of OpenGL 1.3.],
+ [with_gles="$withval"; with_gles_req="$withval"],[with_gles=no])
+
+HANDLE_X_PATH_ARG(with_gles, --with-gles, JWZGLES)
+
+if test "$with_gles" = yes; then
+ have_gles=yes
+ AC_DEFINE(HAVE_JWZGLES)
+ JWZGLES_OBJS="jwzgles.o"
+ AC_MSG_RESULT(using OpenGL ES compatiblity shim)
+elif test "$with_gles" != no; then
+ echo "error: must be yes or no: --with-gles=$with_xpm"
+ exit 1
+fi
+
+# May want to phase out glBitmap even in a non-GLES world.
+#
+if test "$have_gles" = yes; then
+ GLFPS_OBJS="fps-gl.o glxfonts.o texfont.o"
+ GLFONT_OBJS=""
+else
+ AC_DEFINE(HAVE_GLBITMAP)
+ GLFPS_OBJS="fps-gl.o glxfonts.o"
+ GLFONT_OBJS="texfont.o"
+fi
+
+
+###############################################################################
+#
+# Check for -lgdk_pixbuf.
+# These tests are for gdk_pixbuf usage of the hacks,
+# not xscreensaver-demo (thus we have to test again to get
+# the libraries right: don't want to pull in all of GTK
+# for the hacks.)
+#
+###############################################################################
+
+have_gdk_pixbuf=no
+with_gdk_pixbuf_req=unspecified
+AC_ARG_WITH(pixbuf,
+[ --with-pixbuf Include support for the GDK-Pixbuf library in some
+ demos, which will make it possible for them to read
+ GIF, JPEG, and PNG files as well.],
+ [with_gdk_pixbuf="$withval"; with_gdk_pixbuf_req="$withval"],
+ [with_gdk_pixbuf=yes])
+
+# if --with-pixbuf=/directory/ was specified, remember that directory so that
+# we can also look for the `gdk-pixbuf-config' program in that directory.
+case "$with_gdk_pixbuf" in
+ /*)
+ gdk_pixbuf_dir="$with_gdk_pixbuf"
+ ;;
+ *)
+ gdk_pixbuf_dir=""
+ ;;
+esac
+
+HANDLE_X_PATH_ARG(with_gdk_pixbuf, --with-pixbuf, GDK_PIXBUF)
+
+if test "$with_gdk_pixbuf" != yes -a "$with_gdk_pixbuf" != no ; then
+ echo "error: must be yes or no: --with-pixbuf=$with_gdk_pixbuf"
+ exit 1
+fi
+
+if test "$with_gdk_pixbuf" = yes; then
+ have_gdk_pixbuf=no
+
+ pkgs=''
+ ok="yes"
+
+ pkg_check_version gdk-pixbuf-2.0 2.0.0
+ pkg_check_version gdk-pixbuf-xlib-2.0 2.0.0
+ have_gdk_pixbuf="$ok"
+
+ if test "$have_gdk_pixbuf" = yes; then
+ AC_CACHE_CHECK([for gdk-pixbuf includes], ac_cv_gdk_pixbuf_config_cflags,
+ [ac_cv_gdk_pixbuf_config_cflags=`$pkg_config --cflags $pkgs`])
+ AC_CACHE_CHECK([for gdk-pixbuf libs], ac_cv_gdk_pixbuf_config_libs,
+ [ac_cv_gdk_pixbuf_config_libs=`$pkg_config --libs $pkgs`])
+ fi
+
+ ac_gdk_pixbuf_config_cflags=$ac_cv_gdk_pixbuf_config_cflags
+ ac_gdk_pixbuf_config_libs=$ac_cv_gdk_pixbuf_config_libs
+
+
+ if test "$have_gdk_pixbuf" = yes; then
+ #
+ # we appear to have pixbuf; check for headers/libs to be sure.
+ #
+ ac_save_gdk_pixbuf_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $ac_gdk_pixbuf_config_cflags"
+
+ have_gdk_pixbuf=no
+
+ # check for header A...
+ AC_CHECK_X_HEADER(gdk-pixbuf/gdk-pixbuf.h, [have_gdk_pixbuf=yes])
+
+ # if that worked, check for header B...
+ if test "$have_gdk_pixbuf" = yes; then
+ have_gdk_pixbuf=no
+ gdk_pixbuf_halfassed=yes
+ AC_CHECK_X_HEADER(gdk-pixbuf/gdk-pixbuf-xlib.h,
+ [have_gdk_pixbuf=yes
+ gdk_pixbuf_halfassed=no])
+
+ # yay, it has a new name in Gtk 2.x...
+ if test "$have_gdk_pixbuf" = no; then
+ have_gdk_pixbuf=no
+ gdk_pixbuf_halfassed=yes
+ AC_CHECK_X_HEADER(gdk-pixbuf-xlib/gdk-pixbuf-xlib.h,
+ [have_gdk_pixbuf=yes
+ gdk_pixbuf_halfassed=no])
+ fi
+ fi
+ CPPFLAGS="$ac_save_gdk_pixbuf_CPPFLAGS"
+ fi
+
+ if test "$have_gdk_pixbuf" = yes; then
+ # we have the headers, now check for the libraries
+ have_gdk_pixbuf=no
+ gdk_pixbuf_halfassed=yes
+
+ AC_MSG_RESULT(checking for gdk_pixbuf usability...)
+
+ # library A...
+ AC_CHECK_X_LIB(c, gdk_pixbuf_new_from_file, [have_gdk_pixbuf=yes],,
+ $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
+ # library B...
+ if test "$have_gdk_pixbuf" = yes; then
+ have_gdk_pixbuf=no
+ AC_CHECK_X_LIB(c, gdk_pixbuf_xlib_init,
+ [have_gdk_pixbuf=yes
+ gdk_pixbuf_halfassed=no],,
+ $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
+ fi
+ fi
+
+ if test "$have_gdk_pixbuf" = yes; then
+ INCLUDES="$INCLUDES $ac_gdk_pixbuf_config_cflags"
+ XPM_LIBS="$ac_gdk_pixbuf_config_libs"
+ AC_DEFINE(HAVE_GDK_PIXBUF)
+ else
+ AC_MSG_RESULT(checking for gdk_pixbuf usability... no)
+ fi
+
+ if test "$have_gdk_pixbuf" = yes; then
+ AC_CHECK_X_LIB(c, gdk_pixbuf_apply_embedded_orientation,
+ [AC_DEFINE(HAVE_GDK_PIXBUF_APPLY_EMBEDDED_ORIENTATION)],,
+ $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
+ fi
+fi
+
###############################################################################
#
have_xpm=no
with_xpm_req=unspecified
AC_ARG_WITH(xpm,
-[ --with-xpm Include support for XPM files in some demos.],
+[ --with-xpm Include support for XPM files in some demos.
+ (Not needed if Pixbuf is used.)],
[with_xpm="$withval"; with_xpm_req="$withval"],[with_xpm=yes])
HANDLE_X_PATH_ARG(with_xpm, --with-xpm, XPM)
AC_CHECK_X_HEADER(X11/xpm.h,
[have_xpm=yes
AC_DEFINE(HAVE_XPM)
- XPM_LIBS="-lXpm"])
+ XPM_LIBS="-lXpm $XPM_LIBS"],,
+ [#include <X11/Xlib.h>])
elif test "$with_xpm" != no; then
echo "error: must be yes or no: --with-xpm=$with_xpm"
exit 1
fi
fi
+if test "$XPM_LIBS" = "" ; then
+ XPM_LIBS=$(MINIXPM)
+fi
+
+
+###############################################################################
+#
+# Check for -ljpeg
+#
+###############################################################################
+
+have_jpeg=no
+with_jpeg_req=unspecified
+jpeg_halfassed=no
+AC_ARG_WITH(jpeg,
+[ --with-jpeg Include support for the JPEG library.],
+ [with_jpeg="$withval"; with_jpeg_req="$withval"],
+ [with_jpeg=yes])
+
+HANDLE_X_PATH_ARG(with_jpeg, --with-jpeg, JPEG)
+
+if test "$with_jpeg" != yes -a "$with_jpeg" != no ; then
+ echo "error: must be yes or no: --with-jpeg=$with_jpeg"
+ exit 1
+fi
+
+if test "$with_jpeg" = yes; then
+
+ have_jpeg=no
+ AC_CHECK_X_HEADER(jpeglib.h, [have_jpeg=yes])
+
+ if test "$have_jpeg" = yes; then
+ # we have the header, now check for the library
+ have_jpeg=no
+ jpeg_halfassed=yes
+ AC_CHECK_X_LIB(jpeg, jpeg_start_compress,
+ [have_jpeg=yes
+ jpeg_halfassed=no
+ JPEG_LIBS="-ljpeg"
+ AC_DEFINE(HAVE_JPEGLIB)])
+ fi
+fi
+
+
+###############################################################################
+#
+# Check for pty support: this allows 'phosphor' and 'apple2'
+# to run curses-based programs, or be used as terminal windows.
+#
+###############################################################################
+
+PTY_LIBS=
+AC_CHECK_HEADERS(pty.h util.h)
+AC_CHECK_X_LIB(util, forkpty,
+ [PTY_LIBS="-lutil"
+ ac_have_forkpty=yes
+ AC_DEFINE(HAVE_FORKPTY)])
+
+if test "$ac_have_forkpty" != yes ; then
+ # we don't need (or have) -lutil on MacOS 10.4.2...
+ AC_CHECK_X_LIB(c, forkpty,
+ [PTY_LIBS=""
+ AC_DEFINE(HAVE_FORKPTY)])
+fi
###############################################################################
#
have_xshm=no
with_xshm_req=unspecified
AC_ARG_WITH(xshm-ext,
-[ --with-xshm-ext Include support for the XSHM extension.],
+[ --with-xshm-ext Include support for the Shared Memory extension.],
[with_xshm="$withval"; with_xshm_req="$withval"],[with_xshm=yes])
HANDLE_X_PATH_ARG(with_xshm, --with-xshm-ext, XSHM)
if test "$with_xshm" = yes; then
# first check for Xshm.h.
- AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes])
+ AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes],,
+ [#include <X11/Xlib.h>])
# if that succeeded, then check for sys/ipc.h.
if test "$have_xshm" = yes; then
if test "$with_xdbe" = yes; then
- AC_CHECK_X_HEADER(X11/extensions/Xdbe.h, [have_xdbe=yes])
+ AC_CHECK_X_HEADER(X11/extensions/Xdbe.h, [have_xdbe=yes],,
+ [#include <X11/Xlib.h>])
if test "$have_xdbe" = yes; then
AC_DEFINE(HAVE_DOUBLE_BUFFER_EXTENSION)
fi
if test "$with_readdisplay" = yes; then
AC_CHECK_X_HEADER(X11/extensions/readdisplay.h,
- AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION))
+ AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION),,
+ [#include <X11/Xlib.h>])
elif test "$with_readdisplay" != no; then
echo "error: must be yes or no: --with-readdisplay=$with_readdisplay"
exit 1
###############################################################################
#
-# Check for the SGI Iris Video Library.
+# Check for a directory full of images to use as the default value
+# of the "imageDirectory" preference.
#
###############################################################################
-have_sgivideo=no
-with_sgivideo_req=unspecified
-AC_ARG_WITH(sgivideo,
-[ --with-sgivideo Include support for SGI's Iris Video Library.],
- [with_sgivideo="$withval"; with_sgivideo_req="$withval"],
- [with_sgivideo=yes])
+have_imagedir=no
+with_imagedir_req=unspecified
-HANDLE_X_PATH_ARG(with_sgivideo, --with-sgivideo, Iris Video)
+AC_ARG_WITH(image-directory,
+[ --with-image-directory Arg is the default directory from which some demos
+ will choose random images to display.],
+ [with_imagedir="$withval"; with_imagedir_req="$withval"],
+ [with_imagedir=yes])
+# no HANDLE_X_PATH_ARG for this one
-if test "$with_sgivideo" = yes; then
- AC_CHECK_X_HEADER(dmedia/vl.h, have_sgivideo=yes)
- if test "$have_sgivideo" = yes; then
- have_sgivideo=no
- AC_CHECK_LIB(vl, vlOpenVideo, [have_sgivideo=yes])
- if test "$have_sgivideo" = yes; then
- SGI_VIDEO_OBJS="$(UTILS_BIN)/sgivideo.o"
- SGI_VIDEO_LIBS="-lvl"
- AC_DEFINE(HAVE_SGI_VIDEO)
+case "$with_imagedir" in
+ /*)
+ # absolute path
+ AC_MSG_CHECKING([for image directory $with_imagedir])
+ if test -d "$with_imagedir" ; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ with_imagedir=""
fi
- fi
-elif test "$with_sgivideo" != no; then
- echo "error: must be yes or no: --with-sgivideo=$with_sgivideo"
- exit 1
+ ;;
+ yes)
+ with_imagedir=""
+
+ #### Could use some more defaults here...
+ for dd in \
+ "/usr/share/backgrounds/images/" \
+ "/usr/share/wallpapers/" \
+ "/Library/Desktop Pictures/" \
+ ; do
+ if test -z "$with_imagedir"; then
+ AC_MSG_CHECKING([for image directory $dd])
+ if test -d "$dd" ; then
+ AC_MSG_RESULT(yes)
+ with_imagedir="$dd"
+ else
+ AC_MSG_RESULT(no)
+ fi
+ fi
+ done
+
+ ;;
+ no)
+ with_imagedir=""
+ ;;
+
+ *)
+ echo "error: must be an absolute path: --with-image-directory=$with_imagedir_req"
+ exit 1
+ ;;
+esac
+ac_cv_imagedir="$with_imagedir"
+
+DEFAULT_IMAGES_P='True'
+DEFAULT_IMAGE_DIRECTORY="$ac_cv_imagedir"
+
+if test -z "$DEFAULT_IMAGE_DIRECTORY" ; then
+ DEFAULT_IMAGES_P='False'
fi
###############################################################################
#
-# Check for a program to generate random text.
-#
-# Zippy is funnier than the idiocy generally spat out by `fortune',
-# so try to find that, by invoking Emacs and asking it where its
-# libexec directory is ("yow" lives in there.)
-#
-# If that doesn't work, see if fortune, zippy, or yow are on $PATH,
-# and if so, use them.
-#
-# If that doesn't work, look in /usr/games, and if it's there, use
-# the full pathname.
+# Pick a text file to use as the default of the "textFile" preference.
+# Any old file will do, but preferably one that will make interesting
+# shapes when displayed by "starwars" and "fontglide".
#
###############################################################################
-with_zippy_req=""
-AC_ARG_WITH(zippy,[
- --with-zippy=PROGRAM Some demos are able to run an external program and
- display its text; this names the program to use by
- default (though it can be overridden with X
- resources.) If you don't specify this, the default
- is to use \"yow\" from the Emacs distribution (if you
- have it) or else to use \"fortune\".
-],
- [with_zippy_req="$withval"; with_zippy="$withval"],[with_zippy=yes])
+have_textfile=no
+with_textfile_req=unspecified
-if test "$with_zippy" = no || test "$with_zippy" = yes ; then
- with_zippy=""
- with_zippy_req=""
-fi
+AC_ARG_WITH(text-file,
+[ --with-text-file=FILE By default, some demos may display this file.],
+ [with_textfile="$withval"; with_textfile_req="$withval"],
+ [with_textfile=yes])
+# no HANDLE_X_PATH_ARG for this one
-if test -n "$with_zippy_req" ; then
- ac_cv_zippy_program=""
- case "$with_zippy_req" in
- /*)
- AC_MSG_CHECKING([for $with_zippy_req])
- if test -x "$with_zippy_req" ; then
- AC_MSG_RESULT(yes)
- else
- AC_MSG_RESULT(no)
- with_zippy=""
- fi
- ;;
- *)
- # don't cache
- unset ac_cv_path_zip2
- AC_PATH_PROG(zip2, $with_zippy_req, [])
- if test "$zip2" = ""; then
- with_zippy=""
+case "$with_textfile" in
+ /*)
+ # absolute path
+ AC_MSG_CHECKING([for text file $with_textfile])
+ if test -f "$with_textfile" ; then
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ with_textfile=""
+ fi
+ ;;
+ yes)
+ with_textfile=""
+
+ #### Could use some more defaults here...
+ for f in \
+ "/usr/X11R6/lib/X11/doc/README" \
+ "/usr/share/doc/xserver-common/copyright" \
+ "/usr/share/doc/xserver-xorg-core/copyright" \
+ "/usr/X11R6/README" \
+ "/usr/share/doc/libX11*/COPYING" \
+ "/usr/X11/share/X11/doc/README*" \
+ "/usr/share/doc/debian/debian-manifesto" \
+ ; do
+ if test -z "$with_textfile"; then
+ AC_MSG_CHECKING([for text file $f])
+ f=`/bin/ls $f 2>&- | head -1`
+ if test -f "$f" ; then
+ AC_MSG_RESULT(yes)
+ with_textfile="$f"
+ else
+ AC_MSG_RESULT(no)
+ fi
fi
- ;;
- esac
- ac_cv_zippy_program="$with_zippy"
+ done
-elif test -n "$ac_cv_zippy_program"; then
- AC_MSG_RESULT([checking for zippy... (cached) $ac_cv_zippy_program])
-fi
+ ;;
+ no)
+ with_textfile=""
+ ;;
-if test ! -n "$ac_cv_zippy_program"; then
+ *)
+ echo "error: must be an absolute path: --with-text-file=$with_textfile_req"
+ exit 1
+ ;;
+esac
+ac_cv_textfile="$with_textfile"
- AC_CHECK_PROGS(emacs_exe, emacs)
- AC_CHECK_PROGS(xemacs_exe, xemacs)
+DEFAULT_TEXT_FILE="$ac_cv_textfile"
- ac_cv_zippy_program=""
- eargs='-batch -q -nw --eval'
- if test -n "$emacs_exe" ; then
- AC_MSG_CHECKING([for emacs yow])
- #
- # get emacs to tell us where the libexec directory is.
- #
- dir=`$emacs_exe $eargs '(princ (concat exec-directory "\n"))' \
- 2>/dev/null | tail -1`
- dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
- #
- # try running libexec/yow and see if it exits without error.
- #
- if test x"$dir" != x -a -x "$dir/yow" ; then
- if $dir/yow >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- AC_MSG_RESULT(no)
- fi
- fi
- fi
+###############################################################################
+#
+# Check the browser to see help URL
+#
+###############################################################################
- if test -z "$ac_cv_zippy_program" ; then
- AC_MSG_CHECKING([for xemacs yow])
- if test -n "$xemacs_exe" ; then
- #
- # get xemacs to tell us where the libexec directory is.
- #
- dir=`$xemacs_exe $eargs '(princ (concat exec-directory "\n"))' \
- 2>/dev/null | tail -1`
- dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
- #
- # try running libexec/yow and see if it exits without error.
- #
- if test x"$dir" != x -a -x "$dir/yow" ; then
- if $dir/yow >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- #
- # in some xemacs installations, the pathname of the yow.lines file
- # isn't hardcoded into the yow executable, and must be passed on
- # the command line. See if it's in libexec/../etc/.
-
- # M4 sucks!!
- changequote(X,Y)
- dir_up=`echo "$dir" | sed 's@/[^/]*$@@'`
- changequote([,])
-
- yowlines="$dir_up/etc/yow.lines"
- if $dir/yow -f $yowlines >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow -f $yowlines"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- #
- # In newer XEmacs releases, yow.lines is in a different place,
- # and the easiest way to get it is by calling the new function
- # `locate-data-file'.
- #
- yowlines=`$xemacs_exe $eargs \
- '(princ (concat (locate-data-file "yow.lines") "\n"))' \
- 2>/dev/null | tail -1`
- if $dir/yow -f $yowlines >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow -f $yowlines"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- AC_MSG_RESULT(no)
- fi
- fi
- fi
- fi
- fi
- fi
+have_browser=no
+with_browser_req=unspecified
- # if that didn't work, try for some other programs...
- if test -z "$ac_cv_zippy_program" ; then
- fortune=''
- AC_CHECK_PROGS(fortune, [fortune zippy yow])
- # if that didn't work, try for those programs in /usr/games...
- if test -z "$fortune" ; then
- AC_PATH_PROGS(fortune, [fortune zippy yow], fortune,
- /usr/games:/usr/local/games:$PATH)
- fi
- fi
-fi
+AC_ARG_WITH(browser,
+[ --with-browser=BROWSER Specify the web browser used to show the help URL.],
+ [with_browser="$withval"; with_browser_req="$withval"],
+ [with_browser=no ])
+# no HANDLE_X_PATH_ARG for this one
-if test -z "$ac_cv_zippy_program" ; then
- ac_cv_zippy_program=fortune
-fi
+case "$with_browser" in
+ no )
+ ;;
+ * )
+ WITH_BROWSER=$with_browser
+ gnome_open_program=$with_browser
+ AC_MSG_CHECKING([for browser $with_browser])
+ with_browser_fullpath=`which $with_browser 2>/dev/null`
+ case $with_browser_fullpath in
+ /* )
+ AC_MSG_RESULT(yes)
+ have_browser=yes
+ ;;
+ * )
+ AC_MSG_RESULT(no)
+# Only warning: we don't want to install all packages for the
+# dependency of the browser in building stage...
+ echo "WARNING: browser not found: --with-browser=$with_browser"
+ ;;
+ esac
+ ;;
+esac
+ac_cv_browser="$with_browser"
+
+###############################################################################
+#
+# Check whether it's ok to install some hacks as setuid (e.g., "sonar")
+# This should be safe, but let's give people the option.
+#
+###############################################################################
-AC_DEFINE_UNQUOTED(ZIPPY_PROGRAM, "$ac_cv_zippy_program")
+setuid_hacks_default=no
+setuid_hacks="$setuid_hacks_default"
+AC_ARG_WITH(setuid-hacks,
+[ --with-setuid-hacks Allow some demos to be installed `setuid root'
+ (which is needed in order to ping other hosts.)
+],
+ [setuid_hacks="$withval"], [setuid_hacks="$setuid_hacks_default"])
+
+HANDLE_X_PATH_ARG(setuid_hacks, --with-setuid-hacks, setuid hacks)
+
+if test "$setuid_hacks" = yes; then
+ true
+elif test "$setuid_hacks" != no; then
+ echo "error: must be yes or no: --with-setuid-hacks=$setuid_hacks"
+ exit 1
+fi
###############################################################################
fi
-DEMO_MAN="xscreensaver-demo-old.man"
+PREFERRED_DEMO_PROGRAM=''
ALL_DEMO_PROGRAMS=
-if test "$have_athena" = yes; then
- PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xaw
- ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
-fi
-if test "$have_athena3d" = yes; then
- PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xaw3d
- ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
-fi
if test "$have_motif" = yes; then
PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xm
ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
if test "$have_gtk" = yes; then
PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Gtk
ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
- DEMO_MAN="xscreensaver-demo.man"
fi
PASSWD_SRCS="$PASSWD_SRCS \$(PAM_SRCS)"
PASSWD_OBJS="$PASSWD_OBJS \$(PAM_OBJS)"
INSTALL_PAM="install-pam"
+fi
+if test "$enable_pam_check_account_type" = yes; then
+ COMMENT_PAM_CHECK_ACCOUNT=""
+else
+ COMMENT_PAM_CHECK_ACCOUNT="#"
+fi
+if test "$have_passwd_helper" = yes; then
+ PASSWD_SRCS="$PASSWD_SRCS \$(PWHELPER_SRCS)"
+ PASSWD_OBJS="$PASSWD_OBJS \$(PWHELPER_OBJS)"
fi
PASSWD_SRCS="$PASSWD_SRCS \$(PWENT_SRCS)"
PASSWD_OBJS="$PASSWD_OBJS \$(PWENT_OBJS)"
LOCK_OBJS='$(NOLOCK_OBJS_1)'
fi
+if test "$ac_macosx" = yes; then
+ EXES_OSX='$(EXES_OSX)'
+ SCRIPTS_OSX='$(SCRIPTS_OSX)'
+ MEN_OSX='$(MEN_OSX)'
+else
+ EXES_OSX=
+ SCRIPTS_OSX=
+ MEN_OSX=
+fi
+
+
+INSTALL_SETUID='$(INSTALL_PROGRAM) $(SUID_FLAGS)'
+
if test "$need_setuid" = yes; then
NEED_SETUID=yes
- INSTALL_SETUID='$(INSTALL) $(SUID_FLAGS)'
else
NEED_SETUID=no
- INSTALL_SETUID='$(INSTALL_PROGRAM)'
+fi
+
+if test "$setuid_hacks" = yes; then
+ SETUID_HACKS=yes
+else
+ SETUID_HACKS=no
fi
tab=' '
if test "$have_gl" = yes; then
GL_EXES='$(GL_EXES)'
+ SUID_EXES='$(SUID_EXES)'
+ RETIRED_GL_EXES='$(RETIRED_GL_EXES)'
+ GL_UTIL_EXES='$(GL_UTIL_EXES)'
GL_MEN='$(GL_MEN)'
- GL_KLUDGE="${tab} "
+ GL_KLUDGE=" "
else
- GL_KLUDGE="-${tab} "
+ GL_KLUDGE="-"
fi
if test "$have_gle" = yes; then
GLE_EXES='$(GLE_EXES)'
- GLE_MEN='$(GLE_MEN)'
- GLE_KLUDGE="${tab} "
+ GLE_KLUDGE=" "
+else
+ GLE_KLUDGE="-"
+fi
+
+if test "$have_jpeg" = yes -a "$have_gdk_pixbuf" = yes; then
+ JPEG_EXES='$(JPEG_EXES)'
+fi
+
+
+# Another substitution in the XScreenSaver.ad.in file:
+#
+if test "$gnome_open_program" != ''; then
+ GNOME24=''
+ GNOME22='! '
+ NOGNOME='! '
+elif test "$gnome_url_show_program" != ''; then
+ GNOME24='! '
+ GNOME22=''
+ NOGNOME='! '
else
- GLE_KLUDGE="-${tab} "
+ GNOME24='! '
+ GNOME22='! '
+ NOGNOME=''
fi
+# Set PO_DATADIR to something sensible.
+#
+AC_MSG_CHECKING([for locale directory])
+if test -n "$GTK_DATADIR" ; then
+ PO_DATADIR="$GTK_DATADIR"
+elif test "$have_gtk" = yes; then
+ PO_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
+ PO_DATADIR="$PO_DATADIR/share"
+fi
+
+if test -z "$PO_DATADIR" ; then
+ #
+ # #### Total fucking kludge --
+ # Map /build/prefix/usr/X11R6/share/ to /build/prefix/usr/share/
+ # but of course we need to expand all the nested variables to do that...
+ #
+ dd=`eval eval eval eval eval eval eval eval eval eval eval echo $datadir`
+ PO_DATADIR=`echo $dd | sed 's@/X11R6/@/@'`
+fi
+
+AC_MSG_RESULT($PO_DATADIR/locale)
+
+
+# canonicalize slashes.
+HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`
+
+# gcc 3.0 likes to issue this warning for every file:
+#
+# cc1: warning: changing search order for system directory "/usr/local/include"
+# cc1: warning: as it has already been specified as a non-system directory
+#
+# Yay. We can only avoid that by deleting "-I${prefix}/include" from the list.
+# Which *should* be totally redundant, and thus an ok thing to delete?
+#
+INCLUDES=`echo "$INCLUDES" | sed 's@ -I${prefix}/include@@g;'`
+
+
###############################################################################
#
# Perform substitutions and write Makefiles.
AC_SUBST(PREFERRED_DEMO_PROGRAM)
AC_SUBST(ALL_DEMO_PROGRAMS)
-AC_SUBST(DEMO_MAN)
AC_SUBST(SAVER_LIBS)
AC_SUBST(MOTIF_LIBS)
AC_SUBST(GTK_LIBS)
-AC_SUBST(ATHENA_LIBS)
-AC_SUBST(ATHENA3D_LIBS)
+AC_SUBST(XML_LIBS)
+AC_SUBST(JPEG_LIBS)
AC_SUBST(HACK_LIBS)
AC_SUBST(XPM_LIBS)
+AC_SUBST(PTY_LIBS)
AC_SUBST(GL_LIBS)
AC_SUBST(GLE_LIBS)
+AC_SUBST(XDPMS_LIBS)
+AC_SUBST(XINERAMA_LIBS)
AC_SUBST(PASSWD_LIBS)
AC_SUBST(INSTALL_SETUID)
+AC_SUBST(SETUID_HACKS)
AC_SUBST(INSTALL_DIRS)
AC_SUBST(NEED_SETUID)
AC_SUBST(INSTALL_PAM)
-AC_SUBST(SGI_VIDEO_OBJS)
-AC_SUBST(SGI_VIDEO_LIBS)
+AC_SUBST(HAVE_PAM_FAIL_DELAY)
+AC_SUBST(COMMENT_PAM_CHECK_ACCOUNT)
+AC_SUBST(NEW_LOGIN_COMMAND)
+AC_SUBST(NEW_LOGIN_COMMAND_P)
+AC_SUBST(DEFAULT_IMAGES_P)
+AC_SUBST(DEFAULT_IMAGE_DIRECTORY)
+AC_SUBST(DEFAULT_TEXT_FILE)
+AC_SUBST(WITH_BROWSER)
+
+AC_SUBST(OBJCC)
+AC_SUBST(EXES_OSX)
+AC_SUBST(SCRIPTS_OSX)
+AC_SUBST(MEN_OSX)
AC_SUBST(PASSWD_SRCS)
AC_SUBST(PASSWD_OBJS)
AC_SUBST(XMU_SRCS)
AC_SUBST(XMU_OBJS)
+AC_SUBST(XMU_LIBS)
AC_SUBST(SAVER_GL_SRCS)
AC_SUBST(SAVER_GL_OBJS)
AC_SUBST(SAVER_GL_LIBS)
AC_SUBST(LOCK_SRCS)
AC_SUBST(LOCK_OBJS)
+AC_SUBST(JPEG_EXES)
AC_SUBST(GL_EXES)
+AC_SUBST(RETIRED_GL_EXES)
+AC_SUBST(SUID_EXES)
+AC_SUBST(GL_UTIL_EXES)
AC_SUBST(GL_MEN)
AC_SUBST(GL_KLUDGE)
AC_SUBST(GLE_EXES)
-AC_SUBST(GLE_MEN)
AC_SUBST(GLE_KLUDGE)
+AC_SUBST(JWZGLES_OBJS)
+AC_SUBST(GLFPS_OBJS)
+AC_SUBST(GLFONT_OBJS)
+AC_SUBST(GNOME24)
+AC_SUBST(GNOME22)
+AC_SUBST(NOGNOME)
AC_SUBST(HACKDIR)
+AC_SUBST(HACKDIR_FULL)
+AC_SUBST(GTK_DATADIR)
+AC_SUBST(PO_DATADIR)
+AC_SUBST(HACK_CONF_DIR)
+AC_SUBST(GTK_EXTRA_OBJS)
APPDEFAULTS=$ac_x_app_defaults
AC_SUBST(APPDEFAULTS)
AC_OUTPUT(Makefile
utils/Makefile
driver/Makefile
+ driver/xscreensaver.pam
hacks/Makefile
hacks/glx/Makefile
+ po/Makefile.in
driver/XScreenSaver.ad)
###############################################################################
warnpre
if test "$warning" = long ; then echo '' ; fi
warning=yes
- echo "$warn_prefix $@"
+ rest="$@"
+ echo "$warn_prefix $rest"
}
warnL() {
warnpre
warning=yes
if test "$was" != no ; then echo '' ; fi
- echo "$warn_prefix $@"
+ rest="$@"
+ echo "$warn_prefix $rest"
}
warn2() {
- echo " $@"
+ rest="$@"
+ echo " $rest"
warning=long
}
warn 'The SGI saver extension was requested, but was not found.'
fi
-if test "$with_mit_req" = yes -a "$have_mit" = no ; then
- warn 'The MIT saver extension was requested, but was not found.'
-fi
-
if test "$with_xidle_req" = yes -a "$have_xidle" = no ; then
warn 'The XIdle extension was requested, but was not found.'
fi
warn 'The DPMS extension was requested, but was not found.'
fi
+if test "$with_xinerama_req" = yes -a "$have_xinerama" = no ; then
+ warn 'The Xinerama extension was requested, but was not found.'
+fi
+
if test "$with_xf86vmode_req" = yes -a "$have_xf86vmode" = no ; then
warn 'The XF86VMODE extension was requested, but was not found.'
fi
+if test "$with_randr_req" = yes -a "$have_randr" = no ; then
+ warn 'The RANDR extension was requested, but was not found.'
+fi
+
if test "$with_proc_interrupts_req" = yes -a "$have_proc_interrupts" = no; then
warn "Checking of /proc/interrupts was requested, but it's bogus."
fi
+if test "$pkg_config" = false ; then
+ warnL 'The "pkg-config" program was not found. Without that,'
+ warn2 "detection of the various GTK libraries won't work."
+else
+ pkgerr=`$pkg_config --list-all 2>&1 >/dev/null`
+ if test "x$pkgerr" != "x" ; then
+ warnL 'The "pkg-config" program produces errors. This often causes'
+ warn2 "detection of the various GTK libraries to malfunction."
+ warn2 "The errors are:"
+ echo ''
+ echo "$pkgerr" | sed 's/^/ > /g'
+ fi
+fi
+
+if test "$gtk_halfassed" != no ; then
+ warnL "GTK version $gtk_halfassed was found, but at least one supporting"
+ warn2 "library ($gtk_halfassed_lib) was not, so GTK can't be used."
+ warn2 "Perhaps some of the development packages are not installed?"
+ if test "$have_gtk" = yes ; then
+ v="$ac_gtk_version_string"
+ warn2 "GTK $v is also installed, so it will be used instead."
+ warn2 "Please read the above output and the \`config.log' file"
+ warn2 "for more details."
+ fi
+fi
+
+motif_warn2() {
+ warn2 'Though the Motif front-end to xscreensaver is still'
+ warn2 'maintained, it is no longer being updated with new'
+ warn2 'features: all new development on the xscreensaver-demo'
+ warn2 'program is happening in the GTK version, and not in the'
+ warn2 'Motif version. It is recommended that you build against'
+ warn2 'GTK instead of Motif. See <http://www.gtk.org/>.'
+}
-if test "$have_motif" = no -a "$have_gtk" = no -a "$have_athena" = no ; then
- warnL "None of Motif, Gtk, or Athena widgets seem to be available;"
- warn2 "the \`xscreensaver-demo' program requires one of these."
+if test "$have_motif" = no -a "$have_gtk" = no; then
-elif test "$with_motif_req" = yes -a "$have_motif" = no ; then
- warnL "Use of Motif was requested, but it wasn't found;"
- if test "$have_gtk" = yes; then
- warn2 "Gtk will be used instead."
+ if test "$with_motif" = yes; then
+ warnL "Neither the GTK nor Motif libraries were found; the"
+ warn2 "\`xscreensaver-demo' program requires one of these."
+ echo ''
+ motif_warn2
else
- warn2 "Athena will be used instead."
+ warnL "The GTK libraries do not seem to be available; the"
+ warn2 "\`xscreensaver-demo' program requires them."
+# echo ''
+# warn2 'You can use Motif or Lesstif instead of GTK (use the'
+# warn2 "\`--with-motif' option) but that is NOT recommended."
+# motif_warn2
fi
+elif test "$with_motif_req" = yes -a "$have_motif" = no ; then
+ warnL "Use of Motif was requested, but it wasn't found;"
+ warn2 "Gtk will be used instead."
+
elif test "$jurassic_gtk" = yes ; then
- pref_gtk=1.2
+ pref_gtk=2.0
v="$ac_gtk_version_string"
if test "$with_gtk_req" = yes -a "$ac_gtk_version" = "unknown" ; then
warnL "Gtk was found on this system, but it is version $v;"
fi
- if test "$have_motif" = yes; then
- which="Motif"
- else
- which="Athena"
- fi
-
- warn2 "Gtk $pref_gtk or newer is required. $which will be used instead."
+ warn2 "Gtk $pref_gtk or newer is required."
elif test "$with_gtk_req" = yes -a "$have_gtk" = no ; then
- warnL "Use of Gtk was requested, but it wasn't found;"
- if test "$have_motif" = yes; then
- warn2 "Motif will be used instead."
- else
- warn2 "Athena will be used instead."
- fi
-
-elif test "$with_athena_req" = yes -a "$have_athena" = no ; then
- warnL "Use of Athena was requested, but it wasn't found;"
- if test "$have_gtk" = yes; then
- warn2 "Gtk will be used instead."
- else
- warn2 "Motif will be used instead."
- fi
+ warnL "Use of Gtk was requested, but it wasn't found."
fi
+if test "$have_gtk" = yes -a "$have_gdk_pixbuf" = no ; then
+ warn "GTK is being used, but the GDK-Pixbuf library and/or"
+ warn2 "headers were not found. That can't be good. Please"
+ warn2 "install the GDK-Pixbuf development kit and re-configure."
+fi
+
if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
- preferred_lesstif=0.86
+ preferred_lesstif=0.92
if test "$lesstif_version" = unknown; then
warnL "Unable to determine the LessTif version number!"
fi
fi
-if test "$have_athena" = yes -a "$have_motif" = no -a "$have_gtk" = no; then
- warnL "Athena widgets are being used instead of Motif or Gtk."
- warn2 "The \`xscreensaver-demo' program looks much better"
- warn2 "with Motif or Gtk. Wouldn't you rather be using Motif?"
- warn2 "Motif is shipped by every commercial Unix vendor,"
- warn2 "and there is a free implementation available as"
- warn2 "well: see <http://www.lesstif.org/>. Gtk is shipped"
- warn2 "with most Linux and BSD distributions."
+
+if test "$have_motif" = yes -a "$have_gtk" = no ; then
+ warn 'Motif is being used, and GTK is not.'
+ echo ''
+ motif_warn2
+fi
+
+
+if test "$with_xpm_req" = yes -a "$have_xpm" = no; then
+ warnL 'Use of XPM was requested, but it was not found.'
fi
+if test "$with_gdk_pixbuf_req" = yes -a "$have_gdk_pixbuf" = no; then
+ warnL 'Use of GDK-Pixbuf was requested, but it was not found.'
+fi
-if test "$have_xpm" = no ; then
- if test "$with_xpm_req" = yes ; then
- warnL 'Use of XPM was requested, but it was not found.'
+if test "$have_gdk_pixbuf" = no -o "$gdk_pixbuf_halfassed" = yes || \
+ test "$have_gdk_pixbuf" = no -a "$have_xpm" = no ; then
+
+ if test "$with_gdk_pixbuf_req" = yes ; then
+ true
+ elif test "$with_gdk_pixbuf_req" = no ; then
+ warnL 'The GDK-Pixbuf library is not being used.'
+ else
+ warnL 'The GDK-Pixbuf library was not found.'
+ fi
+
+ if test "$with_xpm_req" = yes -o "$have_xpm" = yes ; then
+ true
elif test "$with_xpm_req" = no ; then
- noteL 'The XPM library is not being used.'
+ warnL 'The XPM library is not being used.'
else
- noteL 'The XPM library was not found.'
+ warnL 'The XPM library was not found.'
+ fi
+
+ if test "$have_gdk_pixbuf" = no -a "$have_xpm" = yes ; then
+ warn2 'The XPM library is being used instead.'
+ fi
+
+ if test "$gdk_pixbuf_halfassed" = yes ; then
+ echo ''
+ warn2 'More specifically, we found the headers, but not the'
+ warn2 'libraries; so either GDK-Pixbuf is half-installed on this'
+ warn2 "system, or something else went wrong. The \`config.log'"
+ warn2 'file might contain some clues.'
fi
echo ''
- warn2 'Some of the demos will not be as colorful as they'
- warn2 'could be. You might want to consider installing XPM'
- warn2 'and re-running configure. (Remember to delete the'
- warn2 'config.cache file first.) You can find XPM at most'
- warn2 'X11 archive sites, such as <http://sunsite.unc.edu/>.'
+ warn2 'Some of the demos will not use images as much as they could.'
+ warn2 'You should consider installing GDK-Pixbuf and re-running'
+ warn2 'configure. (GDK-Pixbuf is recommended over XPM, as it'
+ warn2 'provides support for more image formats.)'
+fi
+
+
+if test "$have_jpeg" = no ; then
+ if test "$with_jpeg_req" = yes ; then
+ warnL 'Use of libjpeg was requested, but it was not found.'
+ elif test "$with_jpeg_req" = no ; then
+ noteL 'The JPEG library is not being used.'
+ else
+ noteL 'The JPEG library was not found.'
+ fi
+
+ if test "$jpeg_halfassed" = yes ; then
+ echo ''
+ warn2 'More specifically, we found the headers, but not the'
+ warn2 'library; so either JPEG is half-installed on this'
+ warn2 "system, or something else went wrong. The \`config.log'"
+ warn2 'file might contain some clues.'
+ echo ''
+ fi
+
+ if test "$have_gdk_pixbuf" = no ; then
+ warn2 "This means that it won't be possible for the image-manipulating"
+ warn2 "display modes to load files from disk; and it also means that"
+ warn2 "the \`webcollage' program will be much slower."
+ else
+ warn2 "This means the \`webcollage' program will be much slower."
+ fi
fi
if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then
- preferred_mesagl=3.0
+ preferred_mesagl=3.4
+ mgv="$ac_mesagl_version_string"
+ pgl="$preferred_mesagl"
if test "$ac_mesagl_version" = unknown; then
- warnL "Unable to determine the MesaGL version number!"
- warn2 "Make sure you are using version $preferred_mesagl or newer."
+ true
+ # warnL "Unable to determine the MesaGL version number!"
+ # warn2 "Make sure you are using version $preferred_mesagl or newer."
elif test \! "$ac_mesagl_version" -gt 2006; then
- warnL "MesaGL version $ac_mesagl_version_string is being used."
- warn2 "MesaGL versions 2.6 and earlier have a security bug."
- warn2 "It is strongly recommended that you upgrade to at"
- warn2 "least version $preferred_mesagl."
+ warnL "MesaGL version number is $mgv --"
+ warn2 "MesaGL 2.6 and earlier have a security bug. It is strongly"
+ warn2 "recommended that you upgrade to at least version $preferred_mesagl."
+
+ elif test \! "$ac_mesagl_version" -gt 3003; then
+ warnL "MesaGL version number is $mgv --"
+ warn2 "MesaGL 3.3 and earlier have some bugs; it is recommended"
+ warn2 "that you upgrade to $pgl or newer."
fi
fi
echo ''
warn2 'Those demos which use 3D will not be built or installed.'
warn2 'You might want to consider installing OpenGL and'
- warn2 're-running configure. (Remember to delete the'
- warn2 "config.cache file first.) If your vendor doesn't ship"
+ warn2 "re-running configure. If your vendor doesn't ship"
warn2 'their own implementation of OpenGL, you can get a free'
warn2 'version at <http://www.mesa3d.org/>. For general OpenGL'
warn2 'info, see <http://www.opengl.org/>.'
if test "$have_gl" = yes -a "$have_gle" = no ; then
+
+ # nobody cares about this; don't print the warning unless it was
+ # requested and not found, or halfway-found.
+ if test "$with_gle_req" = yes -o "$gle_halfassed" = yes ; then
+
if test "$with_gle_req" = yes ; then
noteL 'Use of the GLE (GL Extrusion) library was requested, but'
warn2 'it was not found (though the OpenGL library was found, and'
echo ''
warn2 'Some of the OpenGL (3D) demos (those that depend on GLE)'
warn2 'will not be built or installed. You might want to consider'
- warn2 'installing GLE and re-running configure. (Remember to delete'
- warn2 'the config.cache file first.) You can find the GLE library'
- warn2 'at <http://www.linas.org/gle/>. For general OpenGL info,'
- warn2 'see <http://www.opengl.org/>.'
+ warn2 'installing GLE and re-running configure. You can find the'
+ warn2 'GLE library at <http://www.linas.org/gle/>. For general'
+ warn2 'OpenGL info, see <http://www.opengl.org/>.'
+ fi
fi
warn 'Use of XReadDisplay was requested, but it was not found.'
fi
-if test "$with_sgivideo_req" = yes -a "$have_sgivideo" = no ; then
- warn 'Use of the Iris Video Library was requested, but it was not found.'
-fi
-
-if test -n "$with_zippy_req"; then
- if test "$with_zippy_req" != "$ac_cv_zippy_program" ; then
- warnL "$with_zippy_req was requested as the Zippy program,"
- warn2 "but was not found. The default will be used instead."
- fi
-fi
-
if test "$with_kerberos_req" = yes -a "$have_kerberos" = no ; then
warn 'Use of Kerberos was requested, but it was not found.'
fi
warn 'Use of shadow passwords was requested, but they were not found.'
fi
+if test "$ac_macosx" = yes ; then
+ if test "$enable_locking" = yes ; then
+ warn "You have specified --enable-locking on MacOS X."
+ warn2 "THIS DOES NOT WORK! Don't do this!"
+ fi
+fi
+
# You are in a twisty maze of namespaces and syntaxes, all alike.
# Fuck the skull of Unix.
#
-eval bindir=${bindir}
-eval bindir=${bindir}
-eval bindir=${bindir}
-eval bindir=${bindir}
-eval bindir=${bindir}
-eval bindir=${bindir}
-eval HACKDIR=${HACKDIR}
-eval HACKDIR=${HACKDIR}
-eval HACKDIR=${HACKDIR}
-eval HACKDIR=${HACKDIR}
-eval HACKDIR=${HACKDIR}
-eval HACKDIR=${HACKDIR}
+bindir=`eval eval eval eval eval eval eval echo $bindir`
+HACKDIR=`eval eval eval eval eval eval eval echo $HACKDIR`
+HACK_CONF_DIR=`eval eval eval eval eval eval eval echo $HACK_CONF_DIR`
# canonicalize slashes.
-bindir=`echo "${bindir}" | sed 's@/$@@;s@//*@/@g'`
-HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+bindir=`echo "${bindir}" | sed 's@/$@@;s@//*@/@g'`
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`
-# Sanity check the subdir
+# Sanity check the hackdir
for bad_choice in xscreensaver xscreensaver-demo xscreensaver-command ; do
if test "${HACKDIR}" = "${bindir}/${bad_choice}" ; then
echo ""
- AC_MSG_ERROR([\"--enable-subdir=${bindir}/${bad_choice}\" won't work.
+ AC_MSG_ERROR([\"--with-hackdir=${bindir}/${bad_choice}\" won't work.
There will be an executable installed with that name, so
that can't be the name of a directory as well. Please
re-configure with a different directory name.])
do_dir_warning=no
-# Now let's see if there's a previous RPM version already installed. Blargh!
+# Now let's warn if there's a previous RPM version already installed.
+# But don't bother with this test if we are currently *building* an RPM.
-# M4 sucks!!
-changequote(X,Y)
-rpmv=`(rpm -qv xscreensaver) 2>&- | \
- sed 's/^xscreensaver-\([0-9][0-9]*[.][0-9][0-9]*\)-[0-9][0-9]*$/\1/'`
-changequote([,])
+if test -z "$RPM_PACKAGE_VERSION" ; then
-if test \! -z "$rpmv" ; then
- rpmbdir=`rpm -ql xscreensaver | sed -n 's@^\(.*\)/xscreensaver-demo$@\1@p'`
- rpmhdir=`rpm -ql xscreensaver | sed -n 's@^\(.*\)/attraction$@\1@p'`
+ rpmnames="xscreensaver xscreensaver-base xscreensaver-extras"
- warning=no
- warnL "There is already an installed RPM of xscreensaver $rpmv"
- warn2 "on this system. You might want to remove it (with"
- warn2 '"rpm -ve xscreensaver") before running "make install"'
- warn2 "from this directory."
- echo ""
- warn2 "Alternately, you could build this version of xscreensaver"
- warn2 'as an RPM, and then install that. An "xscreensaver.spec"'
- warn2 "file is included. See the RPM documentation for more info."
- echo ""
+ # M4 sucks!!
+ changequote(X,Y)
+ rpmv=`(rpm -qv $rpmnames) 2>/dev/null | \
+ sed -n 's/^[-a-z]*-\([0-9][0-9]*[.][0-9][0-9a-z]*\)-.*$/\1/p' | \
+ head -1`
+ changequote([,])
- if test "$rpmbdir" = "$rpmhdir" ; then
- warn2 "The RPM version was installed in $rpmbdir."
- else
- warn2 "The RPM version was installed in $rpmbdir,"
- warn2 "with demos in $rpmhdir."
- fi
+ if test \! -z "$rpmv" ; then
+ rpmbdir=`rpm -ql $rpmnames | sed -n 's@^\(.*\)/xscreensaver-demo$@\1@p'`
+ rpmhdir=`rpm -ql $rpmnames | sed -n 's@^\(.*\)/popsquares$@\1@p'`
- do_dir_warning=yes
-fi
+ warning=no
+ warnL "There is already an installed RPM of xscreensaver $rpmv"
+ warn2 'on this system. You might want to remove it ("rpm -ve")'
+ warn2 'before running "make install" in this directory.'
+ echo ""
+ warn2 "Alternately, you could build this version of xscreensaver"
+ warn2 'as an RPM, and then install that. An "xscreensaver.spec"'
+ warn2 'file is included. Try "rpmbuild -v -ba xscreensaver.spec".'
+ warn2 "See the RPM documentation for more info."
+ echo ""
+ if test "$rpmbdir" = "$rpmhdir" ; then
+ warn2 "The RPM version was installed in $rpmbdir/."
+ do_dir_warning=yes
+ else
+ warn2 "The RPM version was installed in $rpmbdir/,"
+ warn2 "with demos in $rpmhdir/."
+ fi
+ fi
+fi
-# Warn about egregious GNOME bogosity.
+# Also warn if there's a Debian package installed.
#
-if (rpm -qv control-center) >&- 2>&- ; then
+debnames="xscreensaver xscreensaver-data xscreensaver-data-extra"
+debv=''
+for dpkg in $debnames ; do
+ if test -z "$debv"; then
+ debv=`dpkg -s $dpkg 2>/dev/null | sed -n 's/^Version: \(.*\)$/\1/p'`
+ fi
+done
+
+if test \! -z "$debv" ; then
+ debbdir=`dpkg -L $debnames 2>/dev/null | \
+ sed -n 's@^\(.*/bin/\)xscreensaver$@\1@p'`
+ debhdir=`dpkg -L $debnames 2>/dev/null | \
+ sed -n 's@^\(.*/\)popsquares$@\1@p'`
+ if test -z "$debbdir" ; then debbdir='???'; fi
+ if test -z "$debhdir" ; then debhdir='???'; fi
+
warning=no
- warnL "The Gnome Control Center seems to be installed."
- echo ""
- warn2 "Note that simply installing this version of xscreensaver"
- warn2 "will not cause GNOME to know about the newly-added display"
- warn2 "modes -- GNOME is just lame that way. Instead of using the"
- warn2 "Control Center, try using the \`xscreensaver-demo' command."
+ warnL "There is already an installed dpkg of xscreensaver"
+ warn2 "version \"$debv\" on this system."
+ echo ""
+ warn2 "The dpkg was installed in $debbdir,"
+ warn2 "with demos in $debhdir."
fi
echo ""
echo ' When you run "make install", the "xscreensaver",'
echo ' "xscreensaver-demo", and "xscreensaver-command" executables'
- echo " will be installed in ${bindir}."
+ echo " will be installed in ${bindir}/."
echo ""
- echo " The various graphics demos (100+ different executables) will"
- echo " also be installed in ${HACKDIR}."
+ echo " The various graphics demos (190+ different executables) will"
+ echo " be installed in ${HACKDIR}/."
echo ""
- echo " If you would prefer the demos to be installed elsewhere"
- echo " (for example, in a dedicated directory) you should re-run"
- echo " configure with the --enable-subdir=DIR option. For more"
- echo " information, run $0 --help."
+ echo " If you would prefer the demos to be installed elsewhere,"
+ echo " you should re-run configure with the --with-hackdir=DIR"
+ echo " option. For more information, run \`./configure --help'."
warning=yes
fi
if test "$warning" != no; then
echo '' ; echo "$warnsep" ; echo ''
fi
+
+if test "$do_dir_warning" = no; then
+ if test "$warning" = no; then
+ echo ''
+ fi
+ echo "User programs will be installed in ${bindir}/"
+ echo "Screen savers will be installed in ${HACKDIR}/"
+ echo "Configuration dialogs will be installed in ${HACK_CONF_DIR}/"
+ echo "System-wide default settings will be installed in ${APPDEFAULTS}/"
+ echo ''
+fi