http://packetstormsecurity.org/UNIX/admin/xscreensaver-4.00.tar.gz

[xscreensaver] / configure.in

diff --git a/configure.in b/configure.in
index 878757cb6c70a0c87da043c6f6e8d3fdf853fff9..68a89a58dff7c62e6bb81e473fcc44d9970d7b65 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -1,4 +1,4 @@
-# configure.in --- xscreensaver, Copyright (c) 1997 Jamie Zawinski.
+# configure.in --- xscreensaver, Copyright (c) 1997-2000 Jamie Zawinski.

 #
 
 AC_INIT(driver/subprocs.c)
 #
 
 AC_INIT(driver/subprocs.c)


@@ -46,7 +46,7 @@ AC_DEFUN(AC_PROG_CC_ANSI,
       ;;
 
       *-dec-* )
       ;;
 
       *-dec-* )

-        AC_MSG_RESULT(DEC: adding -std1)
+        AC_MSG_RESULT(DEC: adding -std1 -ieee)

         CC="$CC -std1"
       ;;
 
         CC="$CC -std1"
       ;;
 


@@ -66,8 +66,6 @@ AC_DEFUN(AC_PROG_CC_ANSI,
   if test -n "$GCC"; then
     AC_MSG_RESULT(Turning on gcc compiler warnings.)
     CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"
   if test -n "$GCC"; then
     AC_MSG_RESULT(Turning on gcc compiler warnings.)
     CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"

-    AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
-    CC="$CC -Wp,-lang-c89"

   else
     case "$host" in
       *-irix5* |*-irix6.[0-3]* )
   else
     case "$host" in
       *-irix5* |*-irix6.[0-3]* )


@@ -85,6 +83,63 @@ AC_DEFUN(AC_PROG_CC_ANSI,
 ])
 
 
 ])
 
 

+###############################################################################
+#
+#       Functions to figure out how to disable // comments in ANSI C code.
+#
+#       (With recent gcc, this is done with "-std=c89".  With older gcc, this
+#       is done by passing "-lang-c89" to cpp, by passing "-Wp,-lang-c89" to
+#       gcc.  Old gcc doesn't support -std, and new gcc doesn't support -lang.
+#       so much for compatibility!)
+#
+###############################################################################
+
+AC_DEFUN(AC_GCC_ACCEPTS_STD,
+ [if test -n "$GCC"; then
+   AC_CACHE_CHECK([whether gcc accepts -std],
+     ac_cv_gcc_accepts_std,
+    [if ( gcc -E -std=c89 - </dev/null 2>&1 >/dev/null | \
+          grep unrecognized >/dev/null ); then
+       ac_cv_gcc_accepts_std=no
+     else
+       ac_cv_gcc_accepts_std=yes
+     fi])
+   ac_gcc_accepts_std="$ac_cv_gcc_accepts_std"
+  fi
+])
+
+AC_DEFUN(AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE,
+ [if test -n "$GCC"; then
+   AC_GCC_ACCEPTS_STD
+   AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
+   #
+   # The reason that // comments are banned from xscreensaver is that gcc is
+   # basically the only compiler in the world that supports them in C code.
+   # All other vendors support them only in their C++ compilers, not in their
+   # ANSI C compilers.  This means that it's a portability problem: every time
+   # these comments have snuck into the xscreensaver source code, I've gotten
+   # complaints about it the next day.  So we turn off support for them in gcc
+   # as well to prevent them from accidentially slipping in.
+   #
+   if test "$ac_gcc_accepts_std" = yes ; then
+     #
+     # -std=c89 defines __STRICT_ANSI__, which we don't want.
+     # (That appears to be the only additional preprocessor symbol
+     # it defines, in addition to the syntax changes it makes.)
+     #
+     # -std=gnu89 is no good, because // comments were a GNU extension
+     # before they were in the ANSI C 99 spec...  (gcc 2.96 permits //
+     # with -std=gnu89 but not with -std=c89.)
+     #
+     CC="$CC -std=c89 -U__STRICT_ANSI__"
+   else
+     # The old way:
+     CC="$CC -Wp,-lang-c89"
+   fi
+  fi
+])
+
+

 ###############################################################################
 #
 #       Function to figure out how to create directory trees.
 ###############################################################################
 #
 #       Function to figure out how to create directory trees.


@@ -193,6 +248,26 @@ AC_DEFUN(AC_PROG_PERL,
  ])
 
 
  ])
 
 

+###############################################################################
+#
+#       Function to demand "bc".  Losers.
+#
+###############################################################################
+
+AC_DEFUN(AC_DEMAND_BC,
+ [ac_bc_result=`echo 6+9 | bc 2>/dev/null`
+  AC_MSG_CHECKING([for bc])
+  if test "$ac_bc_result" = "15" ; then
+    AC_MSG_RESULT(yes)
+  else
+    AC_MSG_RESULT(no)
+    echo ''
+    AC_MSG_ERROR([Your system doesn't have \"bc\", which has been a standard
+                  part of Unix since the 1970s.  Come back when your vendor
+                  has grown a clue.])
+  fi
+ ])
+

 ###############################################################################
 #
 #       Functions to check how to do ICMP PING requests.
 ###############################################################################
 #
 #       Functions to check how to do ICMP PING requests.


@@ -230,7 +305,12 @@ AC_DEFUN(AC_CHECK_ICMP,
                    i.icmp_id = 0;
                    i.icmp_seq = 0;
                    si.sin_family = AF_INET;
                    i.icmp_id = 0;
                    i.icmp_seq = 0;
                    si.sin_family = AF_INET;

-                   ip.ip_hl = 0;],
+                   #if defined(__DECC) || defined(_IP_VHL)
+                   ip.ip_vhl = 0;
+                   #else
+                   ip.ip_hl = 0;
+                   #endif
+                   ],

                   [ac_cv_have_icmp=yes],
                   [ac_cv_have_icmp=no])])
  if test "$ac_cv_have_icmp" = yes ; then
                   [ac_cv_have_icmp=yes],
                   [ac_cv_have_icmp=no])])
  if test "$ac_cv_have_icmp" = yes ; then


@@ -264,7 +344,7 @@ AC_DEFUN(AC_CHECK_ICMPHDR,
                    struct ip ip;
                    i.type = ICMP_ECHO;
                    i.code = 0;
                    struct ip ip;
                    i.type = ICMP_ECHO;
                    i.code = 0;

-                   i.cksum = 0;
+                   i.checksum = 0;

                    i.un.echo.id = 0;
                    i.un.echo.sequence = 0;
                    si.sin_family = AF_INET;
                    i.un.echo.id = 0;
                    i.un.echo.sequence = 0;
                    si.sin_family = AF_INET;


@@ -436,15 +516,15 @@ AC_DEFUN(AC_X_RANDOM_PATHS,
       #
       for version in X11R6 X11R5 X11R4 ; do
         # if either pair of directories exists...
       #
       for version in X11R6 X11R5 X11R4 ; do
         # if either pair of directories exists...

-        if test -d /usr/lib/$version || test -d /usr/contrib/$version/lib
+        if test -d /usr/include/$version || test -d /usr/contrib/$version/include

         then
            # if contrib exists, use it...
         then
            # if contrib exists, use it...

-           if test -d /usr/contrib/$version/lib ; then
+           if test -d /usr/contrib/$version/include ; then

              X_CFLAGS="$X_CFLAGS -I/usr/contrib/$version/include"
              X_LIBS="$X_LIBS -L/usr/contrib/$version/lib"
            fi
            # if the "standard" one exists, use it.
              X_CFLAGS="$X_CFLAGS -I/usr/contrib/$version/include"
              X_LIBS="$X_LIBS -L/usr/contrib/$version/lib"
            fi
            # if the "standard" one exists, use it.

-           if test -d /usr/lib/$version ; then
+           if test -d /usr/include/$version ; then

              X_CFLAGS="$X_CFLAGS -I/usr/include/$version"
              X_LIBS="$X_LIBS -L/usr/lib/$version"
            fi
              X_CFLAGS="$X_CFLAGS -I/usr/include/$version"
              X_LIBS="$X_LIBS -L/usr/lib/$version"
            fi


@@ -456,21 +536,29 @@ AC_DEFUN(AC_X_RANDOM_PATHS,
       # Now find Motif.  Thanks for not making xmkmf find this by
       # default, you losers.
       #
       # Now find Motif.  Thanks for not making xmkmf find this by
       # default, you losers.
       #

-      if test -d /usr/lib/Motif1.2 ; then
+      if test -d /usr/include/Motif2.1 ; then
+        X_CFLAGS="$X_CFLAGS -I/usr/include/Motif2.1"
+        X_LIBS="$X_LIBS -L/usr/lib/Motif2.1"
+      elif test -d /usr/include/Motif1.2 ; then

         X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.2"
         X_LIBS="$X_LIBS -L/usr/lib/Motif1.2"
         X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.2"
         X_LIBS="$X_LIBS -L/usr/lib/Motif1.2"

-      elif test -d /usr/lib/Motif1.1 ; then
+      elif test -d /usr/include/Motif1.1 ; then

         X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.1"
         X_LIBS="$X_LIBS -L/usr/lib/Motif1.1"
       fi
 
       # Now let's check for the pseudo-standard locations for OpenGL and XPM.
       #
         X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.1"
         X_LIBS="$X_LIBS -L/usr/lib/Motif1.1"
       fi
 
       # Now let's check for the pseudo-standard locations for OpenGL and XPM.
       #

-      if test -d /opt/Mesa/lib ; then
+      if test -d /opt/graphics/OpenGL/include ; then
+        # HP-UX 10.20 puts it here
+        X_CFLAGS="-I/opt/graphics/OpenGL/include $X_CFLAGS"
+        X_LIBS="-L/opt/graphics/OpenGL/lib $X_LIBS"
+      elif test -d /opt/Mesa/lib ; then

         X_CFLAGS="-I/opt/Mesa/include $X_CFLAGS"
         X_LIBS="-L/opt/Mesa/lib $X_LIBS"
       fi
 
         X_CFLAGS="-I/opt/Mesa/include $X_CFLAGS"
         X_LIBS="-L/opt/Mesa/lib $X_LIBS"
       fi
 

+

       if test -d /opt/xpm/lib/X11 ; then
         X_CFLAGS="-I/opt/xpm/include $X_CFLAGS"
         X_LIBS="-L/opt/xpm/lib/X11 $X_LIBS"
       if test -d /opt/xpm/lib/X11 ; then
         X_CFLAGS="-I/opt/xpm/include $X_CFLAGS"
         X_LIBS="-L/opt/xpm/lib/X11 $X_LIBS"


@@ -654,15 +742,24 @@ AC_DEFUN(HANDLE_X_PATH_ARG, [
 # random compiler setup
 AC_CANONICAL_HOST
 AC_PROG_CC_ANSI
 # random compiler setup
 AC_CANONICAL_HOST
 AC_PROG_CC_ANSI

+AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE

 AC_PROG_CPP
 AC_C_CONST
 AC_C_INLINE
 AC_PROG_CPP
 AC_C_CONST
 AC_C_INLINE

+AC_DEMAND_BC

 
 # stuff for Makefiles
 AC_PROG_INSTALL
 AC_PROG_INSTALL_DIRS
 AC_PROG_MAKE_SET
 
 
 # stuff for Makefiles
 AC_PROG_INSTALL
 AC_PROG_INSTALL_DIRS
 AC_PROG_MAKE_SET
 

+# By default, autoconf sets INSTALL_SCRIPT to '${INSTALL_PROGRAM}'.
+# That's wrong: it should be set to '${INSTALL}', so that one can
+# implement the "install-strip" target properly (strip executables,
+# but do not try to strip scripts.)
+#
+INSTALL_SCRIPT='${INSTALL}'
+

 # random libc stuff
 AC_HEADER_STDC
 AC_CHECK_HEADERS(unistd.h)
 # random libc stuff
 AC_HEADER_STDC
 AC_CHECK_HEADERS(unistd.h)


@@ -676,7 +773,7 @@ AC_HEADER_DIRENT
 AC_GETTIMEOFDAY_ARGS
 AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv)
 
 AC_GETTIMEOFDAY_ARGS
 AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv)
 

-AC_CHECK_FUNCS(sigaction syslog realpath)
+AC_CHECK_FUNCS(sigaction syslog realpath setrlimit)

 AC_CHECK_ICMP
 AC_CHECK_ICMPHDR
 AC_CHECK_HEADERS(crypt.h sys/select.h)
 AC_CHECK_ICMP
 AC_CHECK_ICMPHDR
 AC_CHECK_HEADERS(crypt.h sys/select.h)


@@ -684,7 +781,7 @@ AC_PROG_PERL
 
 if test -z "$PERL" ; then
   # don't let it be blank...
 
 if test -z "$PERL" ; then
   # don't let it be blank...

-  PERL=/usr/local/bin/perl5
+  PERL=/usr/bin/perl

 fi
 
 AC_PATH_XTRA
 fi
 
 AC_PATH_XTRA


@@ -710,13 +807,11 @@ AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes])
 if test "$have_xmu" = no ; then
   XMU_SRCS='$(UTILS_SRC)/xmu.c'
   XMU_OBJS='$(UTILS_BIN)/xmu.o'
 if test "$have_xmu" = no ; then
   XMU_SRCS='$(UTILS_SRC)/xmu.c'
   XMU_OBJS='$(UTILS_BIN)/xmu.o'

+  XMU_LIBS=''

 else
   XMU_SRCS=''
   XMU_OBJS=''
 else
   XMU_SRCS=''
   XMU_OBJS=''

-  SAVER_LIBS="-lXmu $SAVER_LIBS"
-  HACK_LIBS="-lXmu $HACK_LIBS"
-  MOTIF_LIBS="-lXmu $MOTIF_LIBS"
-  GTK_LIBS="-lXmu $GTK_LIBS"
+  XMU_LIBS='-lXmu'

   AC_DEFINE(HAVE_XMU)
 fi
 
   AC_DEFINE(HAVE_XMU)
 fi
 


@@ -766,43 +861,91 @@ fi
 
 ###############################################################################
 #
 
 ###############################################################################
 #

-#       Handle the --enable-subdir option
+#       Handle the --with-hackdir option

 #
 ###############################################################################
 
 #
 ###############################################################################
 

-AC_ARG_ENABLE(subdir,[
+have_hackdir=yes
+with_hackdir_req=unspecified
+AC_ARG_WITH(hackdir,[

 Installation options:
 
 Installation options:
 

-  --enable-subdir=DIR     Put the demo programs in a subdirectory of \`bindir',
-                          instead of putting them in bindir itself.  You can
-                          specify the name of the subdirectory.  For example,
-                          \`--exec-prefix=/usr/local --enable-subdir=demos'
-                          would put xscreensaver in /usr/local/bin/, and would
-                          put the demos in /usr/local/bin/demos/.  (If DIR
-                          begins with /, then bindir will not be prepended.)
-
-  --disable-subdir        Just put the demos in \`bindir' (this is the default.)
+  --with-hackdir=DIR      Where to install the hundreds of demo executables.
+                          Default: \`PREFIX/lib/xscreensaver/'

 ],
 ],

-  [enable_subdir="$enableval"],[enable_subdir=no])
-if test x"$enable_subdir" = xno; then
+  [with_hackdir="$withval"; with_hackdir_req="$withval"],[with_hackdir=yes])
+
+if test x"$with_hackdir" = xyes; then
+  HACKDIR='${exec_prefix}/lib/xscreensaver'
+elif test x"$with_hackdir" = xno; then

   HACKDIR='${bindir}'
   HACKDIR='${bindir}'

-elif test x"$enable_subdir" = xyes -o x"$enable_subdir" = x ; then
-  echo "error: must be a subdirectory name: --enable-subdir=$enable_subdir"
-  exit 1

 else
   # there must be a better way than this...
 else
   # there must be a better way than this...

-  if test -z "`echo $enable_subdir | sed 's@^/.*@@'`" ; then
+  if test -z "`echo $with_hackdir | sed 's@^/.*@@'`" ; then

     # absolute path
     # absolute path

-    HACKDIR=$enable_subdir
+    HACKDIR=$with_hackdir

   else
     # relative path
   else
     # relative path

-    HACKDIR='${bindir}/'$enable_subdir
+    HACKDIR="\${exec_prefix}$with_hackdir"

   fi
 fi
 
 # canonicalize slashes.
 HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
 
   fi
 fi
 
 # canonicalize slashes.
 HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
 

+# This option used to be called --enable-subdir; make sure that is no longer
+# used, since configure brain-damagedly ignores unknown --enable options.
+
+obsolete_enable=
+AC_ARG_ENABLE(subdir,,[obsolete_enable=yes])
+if test -n "$obsolete_enable"; then
+  echo "error: the --enable-subdir option has been replaced with"
+  echo "       the new --with-hackdir option; see \`configure --help'"
+  echo "       for more information."
+  exit 1
+fi
+
+
+###############################################################################
+#
+#       Handle the --with-configdir option
+#
+###############################################################################
+
+have_configdir=yes
+with_configdir_req=unspecified
+AC_ARG_WITH(configdir,
+[  --with-configdir=DIR    Where to install the data files that describe each
+                          of the display modes to the GUI.
+                          Default: \`GNOMEPREFIX/control-center/screensavers/'
+                          or \`PREFIX/lib/xscreensaver/config/', depending on
+                          whether GNOME is available.
+],
+  [with_configdir="$withval"; with_configdir_req="$withval"],
+  [with_configdir=yes])
+
+if test x"$with_configdir" = xyes; then
+  # filled in later...
+  HACK_CONF_DIR=''
+elif test x"$with_configdir" = xno; then
+  echo "error: must be yes, or a pathname: --with-configdir=$with_configdir"
+  exit 1
+else
+  # there must be a better way than this...
+  if test -z "`echo $with_configdir | sed 's@^/.*@@'`" ; then
+    # absolute path
+    CONFIGDIR=$with_configdir
+  else
+    # relative path
+    CONFIGDIR="\${exec_prefix}$with_configdir"
+  fi
+fi
+
+# canonicalize slashes.
+CONFIGDIR=`echo "${CONFIGDIR}" | sed 's@/$@@;s@//*@/@g'`
+
+
+

 
 ###############################################################################
 #
 
 ###############################################################################
 #


@@ -976,14 +1119,22 @@ if test "$with_dpms" = yes; then
   # first check for dpms.h
   AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes])
 
   # first check for dpms.h
   AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes])
 

-  # if that succeeded, then check for the -lXdpms
+  # if that succeeded, then check for the DPMS code in the libraries

   if test "$have_dpms" = yes; then
   if test "$have_dpms" = yes; then

+
+    # first look in -lXext (this is where it is with XFree86 4.0)

     have_dpms=no
     have_dpms=no

-    AC_CHECK_X_LIB(Xdpms, DPMSInfo,
-                  [have_dpms=yes; SAVER_LIBS="$SAVER_LIBS -lXdpms"], [true],
-                  -lXext -lX11)
+    AC_CHECK_X_LIB(Xext, DPMSInfo, [have_dpms=yes], [true], -lXext -lX11)
+
+    # if that failed, look in -lXdpms (this is where it was in XFree86 3.x)
+    if test "$have_dpms" = no; then
+      AC_CHECK_X_LIB(Xdpms, DPMSInfo,
+                    [have_dpms=yes; XDPMS_LIBS="-lXdpms"], [true],
+                    -lXext -lX11)
+    fi

   fi
 
   fi
 

+

   # if that succeeded, then we've really got it.
   if test "$have_dpms" = yes; then
     AC_DEFINE(HAVE_DPMS_EXTENSION)
   # if that succeeded, then we've really got it.
   if test "$have_dpms" = yes; then
     AC_DEFINE(HAVE_DPMS_EXTENSION)


@@ -997,7 +1148,53 @@ fi
 
 ###############################################################################
 #
 
 ###############################################################################
 #

-#       Check for the XF86VMODE server extension.
+#       Check for the XINERAMA server extension.
+#
+###############################################################################
+
+have_xinerama=no
+with_xinerama_req=unspecified
+AC_ARG_WITH(xinerama-ext,
+[  --with-xinerama-ext     Include support for the XINERAMA extension.],
+  [with_xinerama="$withval"; with_xinerama_req="$withval"],[with_xinerama=yes])
+
+HANDLE_X_PATH_ARG(with_xinerama, --with-xinerama-ext, XINERAMA)
+
+if test "$with_xinerama" = yes; then
+
+  # first check for Xinerama.h
+  AC_CHECK_X_HEADER(X11/extensions/Xinerama.h, [have_xinerama=yes])
+
+  # if that succeeded, then check for the XINERAMA code in the libraries
+  if test "$have_xinerama" = yes; then
+
+    # first look in -lXext
+    have_xinerama=no
+    AC_CHECK_X_LIB(Xext, XineramaQueryExtension, [have_xinerama=yes], [true],
+                  -lXext -lX11)
+
+    # if that failed, look in -lXinerama (this is where it is in XFree86 4.1.)
+    if test "$have_xinerama" = no; then
+      AC_CHECK_X_LIB(Xinerama, XineramaQueryExtension,
+                     [have_xinerama=yes; SAVER_LIBS="$SAVER_LIBS -lXinerama"],
+                     [true], -lXext -lX11)
+    fi
+  fi
+
+  # if that succeeded, then we've really got it.
+  if test "$have_xinerama" = yes; then
+    AC_DEFINE(HAVE_XINERAMA)
+  fi
+
+elif test "$with_xinerama" != no; then
+  echo "error: must be yes or no: --with-xinerama-ext=$with_xinerama"
+  exit 1
+fi
+
+
+###############################################################################
+#
+#       Check for the XF86VMODE server extension (for virtual screens.)

 #
 ###############################################################################
 
 #
 ###############################################################################
 


@@ -1034,6 +1231,67 @@ elif test "$with_xf86vmode" != no; then
 fi
 
 
 fi
 
 

+###############################################################################
+#
+#       Check for the XF86VMODE server extension (for gamma fading.)
+#
+###############################################################################
+
+have_xf86gamma=no
+have_xf86gamma_ramp=no
+with_xf86gamma_req=unspecified
+AC_ARG_WITH(xf86gamma-ext,
+[  --with-xf86gamma-ext    Include support for XFree86 gamma fading.],
+  [with_xf86gamma="$withval"; with_xf86gamma_req="$withval"],
+  [with_xf86gamma=yes])
+
+HANDLE_X_PATH_ARG(with_xf86gamma, --with-xf86gamma-ext, xf86gamma)
+
+if test "$with_xf86gamma" = yes; then
+
+  # first check for xf86vmode.h, if we haven't already
+  if test "$have_xf86vmode" = yes; then
+    have_xf86gamma=yes
+  else
+    AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86gamma=yes])
+  fi
+
+  # if that succeeded, then check for the -lXxf86vm
+  if test "$have_xf86gamma" = yes; then
+    have_xf86gamma=no
+    AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGamma,
+                  [have_xf86gamma=yes],
+                   [true], -lXext -lX11)
+  fi
+
+  # check for the Ramp versions of the functions too.
+  if test "$have_xf86gamma" = yes; then
+    have_xf86gamma_ramp=no
+    AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGammaRamp,
+                  [have_xf86gamma_ramp=yes],
+                   [true], -lXext -lX11)
+  fi
+
+  # if those tests succeeded, then we've really got the functions.
+  if test "$have_xf86gamma" = yes; then
+    AC_DEFINE(HAVE_XF86VMODE_GAMMA)
+  fi
+
+  if test "$have_xf86gamma_ramp" = yes; then
+    AC_DEFINE(HAVE_XF86VMODE_GAMMA_RAMP)
+  fi
+
+  # pull in the lib, if we haven't already
+  if test "$have_xf86gamma" = yes -a "$have_xf86vmode" = no; then
+    SAVER_LIBS="$SAVER_LIBS -lXxf86vm"
+  fi
+
+elif test "$with_xf86gamma" != no; then
+  echo "error: must be yes or no: --with-xf86gamma-ext=$with_xf86vmode"
+  exit 1
+fi
+
+

 ###############################################################################
 #
 #       Check for HP XHPDisableReset and XHPEnableReset.
 ###############################################################################
 #
 #       Check for HP XHPDisableReset and XHPEnableReset.


@@ -1222,6 +1480,7 @@ fi
 ###############################################################################
 
 have_kerberos=no
 ###############################################################################
 
 have_kerberos=no

+have_kerberos5=no

 with_kerberos_req=unspecified
 
 AC_ARG_WITH(kerberos, 
 with_kerberos_req=unspecified
 
 AC_ARG_WITH(kerberos, 


@@ -1231,21 +1490,41 @@ AC_ARG_WITH(kerberos,
 HANDLE_X_PATH_ARG(with_kerberos, --with-kerberos, Kerberos)
 
 if test "$enable_locking" = yes -a "$with_kerberos" = yes; then
 HANDLE_X_PATH_ARG(with_kerberos, --with-kerberos, Kerberos)
 
 if test "$enable_locking" = yes -a "$with_kerberos" = yes; then

-  AC_CACHE_CHECK([for Kerberos], ac_cv_kerberos,
+  AC_CACHE_CHECK([for Kerberos 4], ac_cv_kerberos,

                  [AC_TRY_X_COMPILE([#include <krb.h>],,
                                    [ac_cv_kerberos=yes],
                                    [ac_cv_kerberos=no])])
                  [AC_TRY_X_COMPILE([#include <krb.h>],,
                                    [ac_cv_kerberos=yes],
                                    [ac_cv_kerberos=no])])

+  AC_CACHE_CHECK([for Kerberos 5], ac_cv_kerberos5,
+                 [AC_TRY_X_COMPILE([#include <kerberosIV/krb.h>],,
+                                   [ac_cv_kerberos5=yes],
+                                   [ac_cv_kerberos5=no])])
+

   if test "$ac_cv_kerberos" = yes ; then
     have_kerberos=yes
     AC_DEFINE(HAVE_KERBEROS)
   if test "$ac_cv_kerberos" = yes ; then
     have_kerberos=yes
     AC_DEFINE(HAVE_KERBEROS)

+  fi
+
+  if test "$ac_cv_kerberos5" = yes ; then
+    have_kerberos=yes
+    have_kerberos5=yes
+    AC_DEFINE(HAVE_KERBEROS)
+    AC_DEFINE(HAVE_KERBEROS5)
+  fi

 
 

+  if test "$have_kerberos5" = yes ; then
+    # from Matt Knopp <mhat@infocalypse.netlag.com>
+    # (who got it from amu@mit.edu)
+    PASSWD_LIBS="$PASSWD_LIBS -lkrb4 -ldes425 -lkrb5 -lk5crypto -lcrypt -lcom_err"
+  elif test "$have_kerberos" = yes ; then

     # from Tim Showalter <tjs+@andrew.cmu.edu>
     PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes"
     # from Tim Showalter <tjs+@andrew.cmu.edu>
     PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes"

+  fi
+
+  if test "$have_kerberos" = yes ; then

     AC_CHECK_FUNC(res_search,,
       AC_CHECK_LIB(resolv,res_search,PASSWD_LIBS="${PASSWD_LIBS} -lresolv",
         AC_MSG_WARN([Can't find DNS resolver libraries needed for Kerberos])
       ))
     AC_CHECK_FUNC(res_search,,
       AC_CHECK_LIB(resolv,res_search,PASSWD_LIBS="${PASSWD_LIBS} -lresolv",
         AC_MSG_WARN([Can't find DNS resolver libraries needed for Kerberos])
       ))

-

   fi
 fi
 
   fi
 fi
 


@@ -1503,7 +1782,7 @@ fi
 
 ###############################################################################
 #
 
 ###############################################################################
 #

-#       Check for -lgtk.
+#       Check for -lgtk (and Gnome stuff)

 #
 ###############################################################################
 
 #
 ###############################################################################
 


@@ -1531,6 +1810,31 @@ if test "$with_gtk" != yes -a "$with_gtk" != no ; then
   exit 1
 fi
 
   exit 1
 fi
 

+have_gnome=no
+with_gnome_req=unspecified
+AC_ARG_WITH(gnome,
+[  --with-gnome            Include support for the Gnome Control Center.],
+  [with_gnome="$withval"; with_gnome_req="$withval"],[with_gnome=yes])
+
+# if --with-gnome=/directory/ was specified, remember that directory so that
+# we can also look for the `gnome-config' program in that directory.
+case "$with_gnome" in
+  /*)
+    gnome_dir="$with_gnome"
+    ;;
+  *)
+    gnome_dir=""
+    ;;
+esac
+
+HANDLE_X_PATH_ARG(with_gnome, --with-gnome, Gnome)
+
+if test "$with_gnome" != yes -a "$with_gnome" != no ; then
+  echo "error: must be yes or no: --with-gnome=$with_gnome"
+  exit 1
+fi
+
+

 jurassic_gtk=no
 if test "$with_gtk" = yes; then
   have_gtk=no
 jurassic_gtk=no
 if test "$with_gtk" = yes; then
   have_gtk=no


@@ -1543,18 +1847,32 @@ if test "$with_gtk" = yes; then
   if test ! -z "$gtk_dir"; then
     # canonicalize slashes.
     gtk_dir=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
   if test ! -z "$gtk_dir"; then
     # canonicalize slashes.
     gtk_dir=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`

-    gtk_path="$gtk_dir:$gtk_dir:$gtk_path"
+    gtk_path="$gtk_dir:$gtk_path"
+  fi
+
+  if test ! -z "gnome_dir"; then
+    # canonicalize slashes.
+    gnome_dir=`echo "${gnome_dir}/bin" | sed 's@//*@/@g'`
+    gtk_path="$gnome_dir:$gtk_path"

   fi
 
   fi
 

-  AC_PATH_PROGS(glib_config, glib-config,, $gtk_path)
-  AC_PATH_PROGS(gtk_config,  gtk-config,,  $gtk_path)
+  AC_PATH_PROGS(glib_config,  glib12-config glib-config,,  $gtk_path)
+  AC_PATH_PROGS(gtk_config,   gtk12-config  gtk-config,,   $gtk_path)
+
+  if test "$with_gnome" = yes; then
+    AC_PATH_PROGS(gnome_config, gnome-config,, $gtk_path)
+  fi

 
   if test -n "$glib_config" -a  -n "gtk_config" ; then
     have_gtk=yes
 
   if test -n "$glib_config" -a  -n "gtk_config" ; then
     have_gtk=yes

+    if test "$with_gnome" = yes -a -n "$gnome_config" ; then
+      have_gnome=yes
+    fi

   fi
   fi

+

   if test "$have_gtk" = yes; then
     AC_CACHE_CHECK([Gtk version number], ac_cv_gtk_version_string,
   if test "$have_gtk" = yes; then
     AC_CACHE_CHECK([Gtk version number], ac_cv_gtk_version_string,

-                   [ac_cv_gtk_version_string=`$glib_config --version`])
+                   [ac_cv_gtk_version_string=`$gtk_config --version`])

     ac_gtk_version_string=$ac_cv_gtk_version_string
     # M4 sucks!!
     changequote(X,Y)
     ac_gtk_version_string=$ac_cv_gtk_version_string
     # M4 sucks!!
     changequote(X,Y)


@@ -1569,18 +1887,141 @@ if test "$with_gtk" = yes; then
     if test "$ac_gtk_version" = "unknown" || test "$ac_gtk_version" -lt 1002
     then
       have_gtk=no
     if test "$ac_gtk_version" = "unknown" || test "$ac_gtk_version" -lt 1002
     then
       have_gtk=no

+      have_gnome=no

       jurassic_gtk=yes
     fi
   fi
       jurassic_gtk=yes
     fi
   fi

+

   if test "$have_gtk" = yes; then
     AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
                    [ac_cv_gtk_config_cflags=`$gtk_config --cflags`])
     AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
                    [ac_cv_gtk_config_libs=`$gtk_config --libs`])
   if test "$have_gtk" = yes; then
     AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
                    [ac_cv_gtk_config_cflags=`$gtk_config --cflags`])
     AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
                    [ac_cv_gtk_config_libs=`$gtk_config --libs`])

-    INCLUDES="$INCLUDES $ac_cv_gtk_config_cflags"
-    GTK_LIBS="$GTK_LIBS $ac_cv_gtk_config_libs"
+  fi
+  ac_gtk_config_cflags=$ac_cv_gtk_config_cflags
+  ac_gtk_config_libs=$ac_cv_gtk_config_libs
+
+  # Check for Gnome Capplet support.
+  #
+  if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+    gnome_config_libs="gtk capplet gnomeui xml"
+    AC_MSG_CHECKING(for Gnome capplet includes)
+    AC_CACHE_VAL(ac_cv_gnome_config_cflags,
+      [if ( $gnome_config --cflags $gnome_config_libs 2>&1 >/dev/null | \
+            grep Unknown >/dev/null ) ; then
+         ac_cv_gnome_config_cflags=''
+       else
+         ac_cv_gnome_config_cflags=`$gnome_config --cflags $gnome_config_libs`
+       fi])
+    ac_gnome_config_cflags=$ac_cv_gnome_config_cflags
+    if test "$ac_gnome_config_cflags" = "" ; then
+      have_gnome=no
+      AC_MSG_RESULT(no)
+    else
+      AC_MSG_RESULT($ac_gnome_config_cflags)
+    fi
+  fi
+
+  if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+    AC_MSG_CHECKING(for Gnome capplet libs)
+    AC_CACHE_VAL(ac_cv_gnome_config_libs,
+      [if ( $gnome_config --libs $gnome_config_libs 2>&1 >/dev/null |
+            grep Unknown >/dev/null ) ; then
+         ac_cv_gnome_config_libs=''
+       else
+         ac_cv_gnome_config_libs=`$gnome_config --libs $gnome_config_libs`
+       fi])
+    ac_gnome_config_libs=$ac_cv_gnome_config_libs
+    if test "$ac_gnome_config_libs" = "" ; then
+      have_gnome=no
+      AC_MSG_RESULT(no)
+    else
+      AC_MSG_RESULT($ac_gnome_config_libs)
+    fi
+  fi
+
+  GNOME_DATADIR=""
+  if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+    GNOME_DATADIR=`$gnome_config --datadir`
+  fi
+
+
+  # If we have Gnome, then override the gtk-config values with 
+  # the gnome-config values.
+  #
+  if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+    ac_gtk_config_cflags=$ac_gnome_config_cflags
+    ac_gtk_config_libs=$ac_gnome_config_libs
+    AC_DEFINE(HAVE_CRAPPLET)
+  fi
+
+
+  if test "$have_gtk" = yes; then
+    INCLUDES="$INCLUDES $ac_gtk_config_cflags"
+    GTK_LIBS="$GTK_LIBS $ac_gtk_config_libs"

     AC_DEFINE(HAVE_GTK)
   fi
     AC_DEFINE(HAVE_GTK)
   fi

+
+fi
+
+
+# Check for the Gnome Help Browser.
+#
+if test "$have_gnome" = yes; then
+  AC_CHECK_PROG(have_gnome_help, gnome-help-browser, yes, no)
+else
+  have_gnome_help=no
+fi
+
+
+###############################################################################
+#
+#       Check for -lxml (if we have Gtk)
+#
+###############################################################################
+
+have_xml=no
+with_xml_req=unspecified
+AC_ARG_WITH(xml,
+[  --with-xml              The XML toolkit is needed for some parts of
+                          the Gtk interface.],
+[with_xml="$withval"; with_xml_req="$withval"],[with_xml=yes])
+
+HANDLE_X_PATH_ARG(with_xml, --with-xml, XML)
+
+if test "$with_xml" != yes -a "$with_xml" != no ; then
+  echo "error: must be yes or no: --with-xml=$with_xml"
+  exit 1
+fi
+
+if test "$have_gtk" != yes; then
+  # don't bother if no GTK
+  with_xml=no
+fi
+
+if test "$with_xml" = yes; then
+  have_xml=no
+
+  # the XML stuff is likely to be in GTK paths.
+  ac_save_X_CFLAGS="$X_CFLAGS"
+  ac_save_X_LIBS="$X_LIBS"
+  X_CFLAGS="$X_CFLAGS $ac_gtk_config_cflags"
+  X_LIBS="$X_LIBS $ac_gtk_config_libs"
+
+  AC_CHECK_X_HEADER(xmlIO.h, [have_xml=yes])
+
+  if test "$have_xml" = yes; then
+    # we have the header, now check for the library
+    have_xml=no
+    AC_CHECK_X_LIB(xml, xmlParseChunk,
+                   [have_xml=yes
+                    XML_LIBS="-lxml"
+                    AC_DEFINE(HAVE_XML)])
+  fi
+
+  X_CFLAGS="$ac_save_X_CFLAGS"
+  X_LIBS="$ac_save_X_LIBS"
+

 fi
 
 
 fi
 
 


@@ -1762,7 +2203,7 @@ if test "$with_gl" = yes; then
     #
     AC_CACHE_CHECK([whether GL is really MesaGL], ac_cv_have_mesa_gl,
       [ac_cv_have_mesa_gl=no
     #
     AC_CACHE_CHECK([whether GL is really MesaGL], ac_cv_have_mesa_gl,
       [ac_cv_have_mesa_gl=no

-       AC_EGREP_X_HEADER(Mesa, GL/glx.h, [ac_cv_have_mesa_gl=yes])
+       AC_EGREP_X_HEADER(Mesa|MESA, GL/glx.h, [ac_cv_have_mesa_gl=yes])

       ])
     ac_have_mesa_gl=$ac_cv_have_mesa_gl
  
       ])
     ac_have_mesa_gl=$ac_cv_have_mesa_gl
  


@@ -1828,6 +2269,11 @@ if test "$with_gl" = yes; then
 #line __oline__ "configure"
 #include "confdefs.h"
 #include <GL/gl.h>
 #line __oline__ "configure"
 #include "confdefs.h"
 #include <GL/gl.h>

+#ifndef MESA_MAJOR_VERSION
+# include <GL/xmesa.h>
+# define MESA_MAJOR_VERSION XMESA_MAJOR_VERSION
+# define MESA_MINOR_VERSION XMESA_MINOR_VERSION
+#endif

 configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
 EOF
 
 configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
 EOF
 


@@ -1872,28 +2318,6 @@ EOF
     #
     AC_CHECK_X_LIB($gl_lib_1, glBindTexture, [AC_DEFINE(HAVE_GLBINDTEXTURE)],
                    [true], $GL_LIBS -lX11 -lXext -lm)
     #
     AC_CHECK_X_LIB($gl_lib_1, glBindTexture, [AC_DEFINE(HAVE_GLBINDTEXTURE)],
                    [true], $GL_LIBS -lX11 -lXext -lm)

-
-
-    # Check whether the `xscreensaver' executable should link against GL.
-    # See comments in utils/visual-gl.c for why this is sometimes necessary.
-    #
-    AC_MSG_CHECKING(whether drastic GL measures must be taken)
-    case "$host" in
-      *-sgi*)
-        AC_MSG_RESULT([yes -- hello, SGI.])
-        AC_DEFINE(DAEMON_USE_GL)
-        SAVER_GL_SRCS='$(UTILS_SRC)/visual-gl.c'
-        SAVER_GL_OBJS='$(UTILS_BIN)/visual-gl.o'
-        SAVER_GL_LIBS="$GL_LIBS"
-      ;;
-      *)
-        AC_MSG_RESULT([no -- non-SGI.])
-        SAVER_GL_SRCS=''
-        SAVER_GL_OBJS=''
-        SAVER_GL_LIBS=''
-      ;;
-    esac
-

   fi
 
 elif test "$with_gl" != no; then
   fi
 
 elif test "$with_gl" != no; then


@@ -1922,9 +2346,14 @@ GLE_LIBS=""
 
 if test "$with_gle" = yes; then
 
 
 if test "$with_gle" = yes; then
 

-  AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no)
-  if test "$have_gle" = yes ; then
-    AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no)
+  AC_CHECK_X_HEADER(GL/gle.h, have_gle3=yes, have_gle3=no)
+  if test "$have_gle3" = yes ; then
+    have_gle=yes;
+  else
+    AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no)
+    if test "$have_gle" = yes ; then
+      AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no)
+    fi

   fi
 
   if test "$have_gle" = yes ; then
   fi
 
   if test "$have_gle" = yes ; then


@@ -1948,6 +2377,13 @@ if test "$with_gle" = yes; then
 #                   [have_gle=yes; gle_halfassed=no],
 #                   [], $GL_LIBS -lX11 -lXext -lm)
 
 #                   [have_gle=yes; gle_halfassed=no],
 #                   [], $GL_LIBS -lX11 -lXext -lm)
 

+    # As of GLE 3 this is in libgle, and has changed name to uview_direction!
+    # *sigh*
+    if test "$have_gle3" = yes ; then
+      AC_CHECK_X_LIB(gle, uview_direction, 
+                     [have_gle=yes; gle_halfassed=no],
+                    [], $GL_LIBS -lX11 -lXext -lm)
+    fi

     # if it wasn't in libgle, then look in libmatrix.
     if test "$have_gle" = no ; then
       AC_CHECK_X_LIB(matrix, uview_direction_d, 
     # if it wasn't in libgle, then look in libmatrix.
     if test "$have_gle" = no ; then
       AC_CHECK_X_LIB(matrix, uview_direction_d, 


@@ -1959,6 +2395,9 @@ if test "$with_gle" = yes; then
 
   if test "$have_gle" = yes ; then
     AC_DEFINE(HAVE_GLE)
 
   if test "$have_gle" = yes ; then
     AC_DEFINE(HAVE_GLE)

+    if test "$have_gle3" = yes ; then
+      AC_DEFINE(HAVE_GLE3)
+    fi

   fi
 
 elif test "$with_gle" != no; then
   fi
 
 elif test "$with_gle" != no; then


@@ -2117,195 +2556,123 @@ elif test "$with_readdisplay" != no; then
 fi
 
 
 fi
 
 

-###############################################################################
-#
-#       Check for the SGI Iris Video Library.
-#
-###############################################################################
-
-have_sgivideo=no
-with_sgivideo_req=unspecified
-AC_ARG_WITH(sgivideo,
-[  --with-sgivideo         Include support for SGI's Iris Video Library.],
-  [with_sgivideo="$withval"; with_sgivideo_req="$withval"],
-  [with_sgivideo=yes])
-
-HANDLE_X_PATH_ARG(with_sgivideo, --with-sgivideo, Iris Video)
-
-if test "$with_sgivideo" = yes; then
-  AC_CHECK_X_HEADER(dmedia/vl.h, have_sgivideo=yes)
-  if test "$have_sgivideo" = yes; then
-    have_sgivideo=no
-    AC_CHECK_LIB(vl, vlOpenVideo, [have_sgivideo=yes])
-    if test "$have_sgivideo" = yes; then
-      SGI_VIDEO_OBJS="$(UTILS_BIN)/sgivideo.o"
-      SGI_VIDEO_LIBS="-lvl"
-      AC_DEFINE(HAVE_SGI_VIDEO)
-    fi
-  fi
-elif test "$with_sgivideo" != no; then
-  echo "error: must be yes or no: --with-sgivideo=$with_sgivideo"
-  exit 1
-fi
-
-

 ###############################################################################
 #
 #       Check for a program to generate random text.
 #
 #       Zippy is funnier than the idiocy generally spat out by `fortune',
 ###############################################################################
 #
 #       Check for a program to generate random text.
 #
 #       Zippy is funnier than the idiocy generally spat out by `fortune',

-#       so try to find that, by invoking Emacs and asking it where its 
-#       libexec directory is ("yow" lives in there.)
-#
-#       If that doesn't work, see if fortune, zippy, or yow are on $PATH,
-#       and if so, use them.
+#       so first see if "fortune zippy" works.  Else, use plain "fortune".

 #
 #

-#       If that doesn't work, look in /usr/games, and if it's there, use
-#       the full pathname.
+#       We used to dig around in Emacs to look for the "yow" program, but
+#       most people who have Emacs also have "fortune zippy", so nevermind.

 #
 ###############################################################################
 
 #
 ###############################################################################
 

-with_zippy_req=""
-AC_ARG_WITH(zippy,[
-  --with-zippy=PROGRAM    Some demos are able to run an external program and
+with_fortune_req=""
+AC_ARG_WITH(fortune,[
+  --with-fortune=PROGRAM  Some demos are able to run an external program and

                           display its text; this names the program to use by
                           default (though it can be overridden with X
                           display its text; this names the program to use by
                           default (though it can be overridden with X

-                          resources.)  If you don't specify this, the default
-                          is to use \"yow\" from the Emacs distribution (if you
-                          have it) or else to use \"fortune\".
-],
-  [with_zippy_req="$withval"; with_zippy="$withval"],[with_zippy=yes])
+                          resources.)  Default is \"/usr/games/fortune\".],
+  [with_fortune_req="$withval"; with_fortune="$withval"],[with_fortune=yes])

 
 

-if test "$with_zippy" = no || test "$with_zippy" = yes ; then
-  with_zippy=""
-  with_zippy_req=""
+if test "$with_fortune" = no || test "$with_fortune" = yes ; then
+  with_fortune=""
+  with_fortune_req=""

 fi
 
 fi
 

-if test -n "$with_zippy_req" ; then
-  ac_cv_zippy_program=""
-  case "$with_zippy_req" in
+if test -n "$with_fortune_req" ; then
+  ac_cv_fortune_program=""
+  case "$with_fortune_req" in

     /*)
     /*)

-      AC_MSG_CHECKING([for $with_zippy_req])
-      if test -x "$with_zippy_req" ; then
+
+      set dummy $with_fortune_req ; fortune_tmp=$2
+      AC_MSG_CHECKING([for $fortune_tmp])
+      if test -x "$fortune_tmp" ; then

         AC_MSG_RESULT(yes)
       else
         AC_MSG_RESULT(no)
         AC_MSG_RESULT(yes)
       else
         AC_MSG_RESULT(no)

-        with_zippy=""
+        with_fortune=""

       fi
     ;;
     *)
       fi
     ;;
     *)

+      set dummy $with_fortune_req ; fortune_tmp=$2

       # don't cache
       # don't cache

-      unset ac_cv_path_zip2
-      AC_PATH_PROG(zip2, $with_zippy_req, [])
-      if test "$zip2" = ""; then
-        with_zippy=""
+      unset ac_cv_path_fortune_tmp
+      AC_PATH_PROG(fortune_tmp, $fortune_tmp, [])
+      if test -z "$fortune_tmp" ; then
+        with_fortune=""

       fi
     ;;
   esac
       fi
     ;;
   esac

-  ac_cv_zippy_program="$with_zippy"
+  ac_cv_fortune_program="$with_fortune"

 
 

-elif test -n "$ac_cv_zippy_program"; then
-  AC_MSG_RESULT([checking for zippy... (cached) $ac_cv_zippy_program])
+elif test -n "$ac_cv_fortune_program"; then
+  AC_MSG_RESULT([checking for fortune... (cached) $ac_cv_fortune_program])

 fi
 
 fi
 

-if test ! -n "$ac_cv_zippy_program"; then
+unset ac_cv_path_fortune_tmp
+unset fortune_tmp

 
 

-  AC_CHECK_PROGS(emacs_exe, emacs)
-  AC_CHECK_PROGS(xemacs_exe, xemacs)
+if test -z "$ac_cv_fortune_program" ; then

 
 

-  ac_cv_zippy_program=""
-  eargs='-batch -q -nw --eval'
+  # first look for fortune in /usr/games/ (and use absolute path)
+  AC_PATH_PROGS(fortune_tmp, fortune,, "/usr/games")

 
 

-  if test -n "$emacs_exe" ; then
-    AC_MSG_CHECKING([for emacs yow])
-    #
-    # get emacs to tell us where the libexec directory is.
-    #
-    dir=`$emacs_exe $eargs '(princ (concat exec-directory "\n"))' \
-         2>/dev/null | tail -1`
-    dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
-    #
-    # try running libexec/yow and see if it exits without error.
-    #
-    if test x"$dir" != x -a -x "$dir/yow" ; then
-      if $dir/yow >&- 2>&- ; then
-        ac_cv_zippy_program="$dir/yow"
-        AC_MSG_RESULT($ac_cv_zippy_program)
-      else
-        AC_MSG_RESULT(no)
-      fi
-    fi
+  # if it's not there, look on $PATH (and don't use absolute path)
+  if test -z "$fortune_tmp" ; then
+     AC_CHECK_PROGS(fortune_tmp, fortune)

   fi
 
   fi
 

-  if test -z "$ac_cv_zippy_program" ; then
-    AC_MSG_CHECKING([for xemacs yow])
-    if test -n "$xemacs_exe" ; then
-      #
-      # get xemacs to tell us where the libexec directory is.
-      #
-      dir=`$xemacs_exe $eargs '(princ (concat exec-directory "\n"))' \
-           2>/dev/null | tail -1`
-      dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
-      #
-      # try running libexec/yow and see if it exits without error.
-      #
-      if test x"$dir" != x -a -x "$dir/yow" ; then
-        if $dir/yow >&- 2>&- ; then
-          ac_cv_zippy_program="$dir/yow"
-          AC_MSG_RESULT($ac_cv_zippy_program)
-        else
-          #
-          # in some xemacs installations, the pathname of the yow.lines file
-          # isn't hardcoded into the yow executable, and must be passed on 
-          # the command line.  See if it's in libexec/../etc/.
-
-          # M4 sucks!!
-          changequote(X,Y)
-          dir_up=`echo "$dir" | sed 's@/[^/]*$@@'`
-          changequote([,])
-
-          yowlines="$dir_up/etc/yow.lines"
-          if $dir/yow -f $yowlines >&- 2>&- ; then
-            ac_cv_zippy_program="$dir/yow -f $yowlines"
-            AC_MSG_RESULT($ac_cv_zippy_program)
-          else
-            #
-            # In newer XEmacs releases, yow.lines is in a different place,
-            # and the easiest way to get it is by calling the new function
-            # `locate-data-file'.
-            #
-            yowlines=`$xemacs_exe $eargs \
-              '(princ (concat (locate-data-file "yow.lines") "\n"))' \
-              2>/dev/null | tail -1`
-            if $dir/yow -f $yowlines >&- 2>&- ; then
-              ac_cv_zippy_program="$dir/yow -f $yowlines"
-              AC_MSG_RESULT($ac_cv_zippy_program)
-            else
-              AC_MSG_RESULT(no)
-            fi
-          fi
-        fi
-      fi
-    fi
+  # if we didn't find anything, then just assume /usr/games/
+  if test -z "$fortune_tmp" ; then
+     fortune_tmp="/usr/games/fortune"

   fi
 
   fi
 

-  # if that didn't work, try for some other programs...
-  if test -z "$ac_cv_zippy_program" ; then
-    fortune=''
-    AC_CHECK_PROGS(fortune, [fortune zippy yow])
-    # if that didn't work, try for those programs in /usr/games...
-    if test -z "$fortune" ; then
-      AC_PATH_PROGS(fortune, [fortune zippy yow], fortune,
-                    /usr/games:/usr/local/games:$PATH)
-    fi
+  ac_cv_fortune_program="$fortune_tmp"
+
+  # now check to see whether "fortune zippy" works.
+  #
+  fortune_tmp="$fortune_tmp zippy"
+  AC_MSG_CHECKING([for zippy quotes])
+  if ( $fortune_tmp >/dev/null 2>&1 ); then
+    ac_cv_fortune_program="$fortune_tmp"
+    AC_MSG_RESULT($fortune_tmp)
+  else
+    AC_MSG_RESULT(no)

   fi
   fi

-fi

 
 

-if test -z "$ac_cv_zippy_program" ; then
-  ac_cv_zippy_program=fortune

 fi
 
 fi
 

-AC_DEFINE_UNQUOTED(ZIPPY_PROGRAM, "$ac_cv_zippy_program")
+unset ac_cv_path_fortune_tmp
+unset fortune_tmp
+
+AC_DEFINE_UNQUOTED(FORTUNE_PROGRAM, "$ac_cv_fortune_program")
+
+
+###############################################################################
+#
+#       Check whether it's ok to install some hacks as setuid (e.g., "sonar")
+#       This should be safe, but let's give people the option.
+#
+###############################################################################
+
+setuid_hacks_default=no
+setuid_hacks="$setuid_hacks_default"
+AC_ARG_WITH(setuid-hacks,
+[  --with-setuid-hacks     Allow some demos to be installed \`setuid root'
+                          (which is needed in order to ping other hosts.)
+],
+  [setuid_hacks="$withval"], [setuid_hacks="$setuid_hacks_default"])
+
+HANDLE_X_PATH_ARG(setuid_hacks, --with-setuid-hacks, setuid hacks)
+
+if test "$setuid_hacks" = yes; then
+  true
+elif test "$setuid_hacks" != no; then
+  echo "error: must be yes or no: --with-setuid-hacks=$setuid_hacks"
+  exit 1
+fi

 
 
 ###############################################################################
 
 
 ###############################################################################


@@ -2329,6 +2696,7 @@ if test \! -z "$libdir" ; then
 fi
 
 
 fi
 
 

+PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xm

 ALL_DEMO_PROGRAMS=
 if test "$have_motif" = yes; then
   PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xm
 ALL_DEMO_PROGRAMS=
 if test "$have_motif" = yes; then
   PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xm


@@ -2361,17 +2729,24 @@ else
   LOCK_OBJS='$(NOLOCK_OBJS_1)'
 fi
 
   LOCK_OBJS='$(NOLOCK_OBJS_1)'
 fi
 

+INSTALL_SETUID='$(INSTALL_PROGRAM) $(SUID_FLAGS)'
+

 if test "$need_setuid" = yes; then
   NEED_SETUID=yes
 if test "$need_setuid" = yes; then
   NEED_SETUID=yes

-  INSTALL_SETUID='$(INSTALL) $(SUID_FLAGS)'

 else
   NEED_SETUID=no
 else
   NEED_SETUID=no

-  INSTALL_SETUID='$(INSTALL_PROGRAM)'
+fi
+
+if test "$setuid_hacks" = yes; then
+  SETUID_HACKS=yes
+else
+  SETUID_HACKS=no

 fi
 
 tab='  '
 if test "$have_gl" = yes; then
   GL_EXES='$(GL_EXES)'
 fi
 
 tab='  '
 if test "$have_gl" = yes; then
   GL_EXES='$(GL_EXES)'

+  GL_UTIL_EXES='$(GL_UTIL_EXES)'

   GL_MEN='$(GL_MEN)'
   GL_KLUDGE="${tab}  "
 else
   GL_MEN='$(GL_MEN)'
   GL_KLUDGE="${tab}  "
 else


@@ -2387,6 +2762,28 @@ else
 fi
 
 
 fi
 
 

+# Another substitution in the XScreenSaver.ad.in file:
+#
+if test "$have_gnome_help" = yes; then
+  GNOMEHELP_Y=''
+  GNOMEHELP_N='!    '
+else
+  GNOMEHELP_Y='!    '
+  GNOMEHELP_N=''
+fi
+
+
+# Now that we know whether we have Gnome, we can decide where the XML
+# config files get installed.
+if test -z "$HACK_CONF_DIR" ; then
+  if test -n "$GNOME_DATADIR" ; then
+    HACK_CONF_DIR='${GNOME_DATADIR}/control-center/screensavers'
+  else
+    HACK_CONF_DIR='${prefix}/lib/xscreensaver/config'
+  fi
+fi
+
+

 ###############################################################################
 #
 #       Perform substitutions and write Makefiles.
 ###############################################################################
 #
 #       Perform substitutions and write Makefiles.


@@ -2400,34 +2797,41 @@ AC_SUBST(ALL_DEMO_PROGRAMS)
 AC_SUBST(SAVER_LIBS)
 AC_SUBST(MOTIF_LIBS)
 AC_SUBST(GTK_LIBS)
 AC_SUBST(SAVER_LIBS)
 AC_SUBST(MOTIF_LIBS)
 AC_SUBST(GTK_LIBS)

+AC_SUBST(XML_LIBS)

 AC_SUBST(HACK_LIBS)
 AC_SUBST(XPM_LIBS)
 AC_SUBST(GL_LIBS)
 AC_SUBST(GLE_LIBS)
 AC_SUBST(HACK_LIBS)
 AC_SUBST(XPM_LIBS)
 AC_SUBST(GL_LIBS)
 AC_SUBST(GLE_LIBS)

+AC_SUBST(XDPMS_LIBS)

 AC_SUBST(PASSWD_LIBS)
 AC_SUBST(INSTALL_SETUID)
 AC_SUBST(PASSWD_LIBS)
 AC_SUBST(INSTALL_SETUID)

+AC_SUBST(SETUID_HACKS)

 AC_SUBST(INSTALL_DIRS)
 AC_SUBST(NEED_SETUID)
 AC_SUBST(INSTALL_PAM)
 AC_SUBST(INSTALL_DIRS)
 AC_SUBST(NEED_SETUID)
 AC_SUBST(INSTALL_PAM)

-AC_SUBST(SGI_VIDEO_OBJS)
-AC_SUBST(SGI_VIDEO_LIBS)

 
 AC_SUBST(PASSWD_SRCS)
 AC_SUBST(PASSWD_OBJS)
 AC_SUBST(XMU_SRCS)
 AC_SUBST(XMU_OBJS)
 
 AC_SUBST(PASSWD_SRCS)
 AC_SUBST(PASSWD_OBJS)
 AC_SUBST(XMU_SRCS)
 AC_SUBST(XMU_OBJS)

+AC_SUBST(XMU_LIBS)

 AC_SUBST(SAVER_GL_SRCS)
 AC_SUBST(SAVER_GL_OBJS)
 AC_SUBST(SAVER_GL_LIBS)
 AC_SUBST(LOCK_SRCS)
 AC_SUBST(LOCK_OBJS)
 AC_SUBST(GL_EXES)
 AC_SUBST(SAVER_GL_SRCS)
 AC_SUBST(SAVER_GL_OBJS)
 AC_SUBST(SAVER_GL_LIBS)
 AC_SUBST(LOCK_SRCS)
 AC_SUBST(LOCK_OBJS)
 AC_SUBST(GL_EXES)

+AC_SUBST(GL_UTIL_EXES)

 AC_SUBST(GL_MEN)
 AC_SUBST(GL_KLUDGE)
 AC_SUBST(GLE_EXES)
 AC_SUBST(GLE_MEN)
 AC_SUBST(GLE_KLUDGE)
 AC_SUBST(GL_MEN)
 AC_SUBST(GL_KLUDGE)
 AC_SUBST(GLE_EXES)
 AC_SUBST(GLE_MEN)
 AC_SUBST(GLE_KLUDGE)

+AC_SUBST(GNOMEHELP_Y)
+AC_SUBST(GNOMEHELP_N)

 AC_SUBST(HACKDIR)
 AC_SUBST(HACKDIR)

+AC_SUBST(GNOME_DATADIR)
+AC_SUBST(HACK_CONF_DIR)

 
 APPDEFAULTS=$ac_x_app_defaults
 AC_SUBST(APPDEFAULTS)
 
 APPDEFAULTS=$ac_x_app_defaults
 AC_SUBST(APPDEFAULTS)


@@ -2468,7 +2872,8 @@ warn() {
   warnpre
   if test "$warning" = long ; then echo '' ; fi
   warning=yes
   warnpre
   if test "$warning" = long ; then echo '' ; fi
   warning=yes

-  echo "$warn_prefix $@"
+  rest="$@"
+  echo "$warn_prefix $rest"

 }
 
 warnL() {
 }
 
 warnL() {


@@ -2476,11 +2881,13 @@ warnL() {
   warnpre
   warning=yes
   if test "$was" != no ; then echo '' ; fi
   warnpre
   warning=yes
   if test "$was" != no ; then echo '' ; fi

-  echo "$warn_prefix $@"
+  rest="$@"
+  echo "$warn_prefix $rest"

 }
 
 warn2() {
 }
 
 warn2() {

-  echo "             $@"
+  rest="$@"
+  echo "             $rest"

   warning=long
 }
 
   warning=long
 }
 


@@ -2525,6 +2932,10 @@ if test "$with_dpms_req" = yes -a "$have_dpms" = no ; then
   warn 'The DPMS extension was requested, but was not found.'
 fi
 
   warn 'The DPMS extension was requested, but was not found.'
 fi
 

+if test "$with_xinerama_req" = yes -a "$have_xinerama" = no ; then
+  warn 'The Xinerama extension was requested, but was not found.'
+fi
+

 if test "$with_xf86vmode_req" = yes -a "$have_xf86vmode" = no ; then
   warn 'The XF86VMODE extension was requested, but was not found.'
 fi
 if test "$with_xf86vmode_req" = yes -a "$have_xf86vmode" = no ; then
   warn 'The XF86VMODE extension was requested, but was not found.'
 fi


@@ -2564,6 +2975,19 @@ elif test "$with_gtk_req" = yes -a "$have_gtk" = no ; then
 fi
 
 
 fi
 
 

+if test "$with_gnome_req" = yes -a "$have_gnome" = no ; then
+  warn  'Use of the Gnome Control Panel was requested, but the necessary'
+  warn2 'headers and/or libraries were not found.'
+fi
+
+if test "$with_xml_req" = yes -a "$have_xml" = no ; then
+  warn  'Use of the XML library was requested, but the necessary'
+  warn2 'headers and/or libraries were not found.'
+elif test "$have_gtk" = yes -a "$have_xml" = no ; then
+  warn  'GTK is being used, but the XML library was not found.'
+  warn2 'Some functionality will be disabled.'
+fi
+

 if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
 
   preferred_lesstif=0.86
 if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
 
   preferred_lesstif=0.86


@@ -2603,17 +3027,22 @@ fi
 
 
 if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then
 
 
 if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then

-  preferred_mesagl=3.0
+  preferred_mesagl=3.4
+  mgv="$ac_mesagl_version_string"
+  pgl="$preferred_mesagl"

 
   if test "$ac_mesagl_version" = unknown; then
     warnL "Unable to determine the MesaGL version number!"
     warn2 "Make sure you are using version $preferred_mesagl or newer."
 
   elif test \! "$ac_mesagl_version" -gt 2006; then
 
   if test "$ac_mesagl_version" = unknown; then
     warnL "Unable to determine the MesaGL version number!"
     warn2 "Make sure you are using version $preferred_mesagl or newer."
 
   elif test \! "$ac_mesagl_version" -gt 2006; then

-    warnL "MesaGL version $ac_mesagl_version_string is being used."
-    warn2 "MesaGL versions 2.6 and earlier have a security bug."
-    warn2 "It is strongly recommended that you upgrade to at"
-    warn2 "least version $preferred_mesagl."
+    warnL "MesaGL version $mgv is being used.  MesaGL 2.6 and earlier"
+    warn2 "have a security bug.  It is strongly recommended that you"
+    warn2 "upgrade to at least version $preferred_mesagl."
+
+  elif test \! "$ac_mesagl_version" -gt 3003; then
+    warnL "MesaGL version $mgv is being used.  That version has some"
+    warn2 "bugs; it is recommended that you upgrade to $pgl or newer."

   fi
 fi
 
   fi
 fi
 


@@ -2682,13 +3111,9 @@ if test "$with_readdisplay_req" = yes -a "$have_readdisplay" = no ; then
   warn 'Use of XReadDisplay was requested, but it was not found.'
 fi
 
   warn 'Use of XReadDisplay was requested, but it was not found.'
 fi
 

-if test "$with_sgivideo_req" = yes -a "$have_sgivideo" = no ; then
-  warn 'Use of the Iris Video Library was requested, but it was not found.'
-fi
-
-if test -n "$with_zippy_req"; then
-  if test "$with_zippy_req" != "$ac_cv_zippy_program" ; then
-    warnL "$with_zippy_req was requested as the Zippy program,"
+if test -n "$with_fortune_req"; then
+  if test "$with_fortune_req" != "$ac_cv_fortune_program" ; then
+    warnL "$with_fortune_req was requested as the Fortune program,"

     warn2 "but was not found.  The default will be used instead."
   fi
 fi
     warn2 "but was not found.  The default will be used instead."
   fi
 fi


@@ -2721,17 +3146,24 @@ eval HACKDIR=${HACKDIR}
 eval HACKDIR=${HACKDIR}
 eval HACKDIR=${HACKDIR}
 eval HACKDIR=${HACKDIR}
 eval HACKDIR=${HACKDIR}
 eval HACKDIR=${HACKDIR}
 eval HACKDIR=${HACKDIR}

+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}

 
 # canonicalize slashes.
 
 # canonicalize slashes.

-bindir=`echo  "${bindir}"  | sed 's@/$@@;s@//*@/@g'`
-HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+bindir=`echo  "${bindir}"              | sed 's@/$@@;s@//*@/@g'`
+HACKDIR=`echo "${HACKDIR}"             | sed 's@/$@@;s@//*@/@g'`
+HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`

 
 
 
 

-# Sanity check the subdir
+# Sanity check the hackdir

 for bad_choice in xscreensaver xscreensaver-demo xscreensaver-command ; do
   if test "${HACKDIR}" = "${bindir}/${bad_choice}" ; then
     echo ""
 for bad_choice in xscreensaver xscreensaver-demo xscreensaver-command ; do
   if test "${HACKDIR}" = "${bindir}/${bad_choice}" ; then
     echo ""

-    AC_MSG_ERROR([\"--enable-subdir=${bindir}/${bad_choice}\" won't work.
+    AC_MSG_ERROR([\"--with-hackdir=${bindir}/${bad_choice}\" won't work.

                    There will be an executable installed with that name, so
                    that can't be the name of a directory as well.  Please
                    re-configure with a different directory name.])
                    There will be an executable installed with that name, so
                    that can't be the name of a directory as well.  Please
                    re-configure with a different directory name.])


@@ -2746,7 +3178,7 @@ do_dir_warning=no
 # M4 sucks!!
 changequote(X,Y)
 rpmv=`(rpm -qv xscreensaver) 2>&- | \
 # M4 sucks!!
 changequote(X,Y)
 rpmv=`(rpm -qv xscreensaver) 2>&- | \

-      sed 's/^xscreensaver-\([0-9][0-9]*[.][0-9][0-9]*\)-[0-9][0-9]*$/\1/'`
+      sed -n 's/^xscreensaver-\([0-9][0-9]*[.][0-9][0-9]*\)-.*$/\1/p'`

 changequote([,])
 
 if test \! -z "$rpmv" ; then
 changequote([,])
 
 if test \! -z "$rpmv" ; then


@@ -2775,19 +3207,6 @@ if test \! -z "$rpmv" ; then
 fi
 
 
 fi
 
 

-# Warn about egregious GNOME bogosity.
-#
-if (rpm -qv control-center) >&- 2>&- ; then
-  warning=no
-  warnL "The Gnome Control Center seems to be installed."
-  echo  ""
-  warn2 "Note that simply installing this version of xscreensaver"
-  warn2 "will not cause GNOME to know about the newly-added display"
-  warn2 "modes -- GNOME is just lame that way.  Instead of using the"
-  warn2 "Control Center, try using the \`xscreensaver-demo' command."
-fi
-
-

 if test "${bindir}" = "${HACKDIR}" ; then
   do_dir_warning=yes
 fi
 if test "${bindir}" = "${HACKDIR}" ; then
   do_dir_warning=yes
 fi


@@ -2800,12 +3219,12 @@ if test "$do_dir_warning" = yes; then
   echo '      "xscreensaver-demo", and "xscreensaver-command" executables'
   echo "      will be installed in ${bindir}."
   echo ""
   echo '      "xscreensaver-demo", and "xscreensaver-command" executables'
   echo "      will be installed in ${bindir}."
   echo ""

-  echo "      The various graphics demos (100+ different executables) will"
+  echo "      The various graphics demos (120+ different executables) will"

   echo "      also be installed in ${HACKDIR}."
   echo ""
   echo "      If you would prefer the demos to be installed elsewhere"
   echo "      (for example, in a dedicated directory) you should re-run"
   echo "      also be installed in ${HACKDIR}."
   echo ""
   echo "      If you would prefer the demos to be installed elsewhere"
   echo "      (for example, in a dedicated directory) you should re-run"

-  echo "      configure with the --enable-subdir=DIR option.  For more"
+  echo "      configure with the --with-hackdir=DIR option.  For more"

   echo "      information, run $0 --help."
   warning=yes
 fi
   echo "      information, run $0 --help."
   warning=yes
 fi


@@ -2813,3 +3232,13 @@ fi
 if test "$warning" != no; then
   echo '' ; echo "$warnsep" ; echo ''
 fi
 if test "$warning" != no; then
   echo '' ; echo "$warnsep" ; echo ''
 fi

+
+if test "$do_dir_warning" = no; then
+  if test "$warning" = no; then
+    echo ''
+  fi
+  echo "User programs will be installed in ${bindir}/"
+  echo "Screen savers will be installed in ${HACKDIR}/"
+  echo "Configuration will be installed in ${HACK_CONF_DIR}/"
+  echo ''
+fi