X-Git-Url: http://git.hungrycats.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=driver%2Fxscreensaver-command.c;h=4c7a02855bd4dbaeb3d0ffdbdf531a9727c98ded;hb=ce3185de9d9705e259f2b60dd4b5509007fa17d4;hp=cf76a6f77515e824f874fc4af940e2124acfb017;hpb=0a1527cc01e9894017614b7c36b838b2b6914ba9;p=xscreensaver

diff --git a/driver/xscreensaver-command.c b/driver/xscreensaver-command.c
index cf76a6f7..4c7a0285 100644
--- a/driver/xscreensaver-command.c
+++ b/driver/xscreensaver-command.c
@@ -1,4 +1,5 @@
-/* xscreensaver-command, Copyright (c) 1991-1993 Jamie Zawinski <jwz@lucid.com>
+/* xscreensaver-command, Copyright (c) 1991-1998
+ *  by Jamie Zawinski <jwz@jwz.org>
  *
  * Permission to use, copy, modify, distribute, and sell this software and its
  * documentation for any purpose is hereby granted without fee, provided that
@@ -9,55 +10,52 @@
  * implied warranty.
  */
 
-#include "version.h"
+#define STANDALONE
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
 #include <stdio.h>
+#include <stdlib.h>
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#include <X11/Xproto.h>		/* for CARD32 */
 #include <X11/Xlib.h>
 #include <X11/Xatom.h>
+#include <X11/Xutil.h>		/* for XGetClassHint() */
 #include <X11/Xos.h>
-#if __STDC__
-# include <stdlib.h>
-#endif
+
+#include <X11/Intrinsic.h>	/* only needed to get through xscreensaver.h */
+
+#include "version.h"
+
+#ifdef STANDALONE
+  static char *progname;
+  static Atom XA_VROOT;
+  static Atom XA_SCREENSAVER, XA_SCREENSAVER_VERSION, XA_SCREENSAVER_TIME;
+#else  /* !STANDALONE */
+# include "xscreensaver.h"
+#endif /* !STANDALONE */
+
 
 #ifdef _VROOT_H_
 ERROR! you must not include vroot.h in this file
 #endif
 
-static char *screensaver_version;
-static char *usage = "usage: %s -<switch>\n\
-\n\
-  This program provides external control of a running xscreensaver process.\n\
-  Version %s, copyright (c) 1991-1993 Jamie Zawinski <jwz@lucid.com>.\n\
-\n\
-  -demo		Enter interactive demo mode.\n\
-  -deactivate	Turns off the screensaver if it is on, as user input would.\n\
-  -activate	Turns it on as if the user had been idle for long enough.\n\
-  -cycle	Stops the current hack and runs a new one.\n\
-  -next		Like either -activate or -cycle, depending on which is more\n\
-		appropriate, except that the screenhack that will be run is\n\
-		the next one in the list of hacks, instead of a randomly-\n\
-		chosen one.  This option is good for looking at a demo of\n\
-		each of the hacks in place.\n\
-  -prev		Like -next, but goes in the other direction.\n\
-  -exit		Causes the screensaver process to exit.  It should be ok to\n\
-		just kill the process (NOT with -9!) but this is a slightly\n\
-		easier way.\n\
-  -restart	Causes the screensaver process to exit and then restart with\n\
-		the same command line arguments.  This is a good way of \n\
-		causing the screensaver to re-read the resource database.\n\
-  -lock         Same as -activate, but with immediate locking.\n\
-\n\
-  See the man page for more details.\n\n";
-
 static Window
-find_screensaver_window (dpy, progname)
-     Display *dpy;
-     char *progname;
+find_screensaver_window (Display *dpy, char **version)
 {
   int i;
   Window root = RootWindowOfScreen (DefaultScreenOfDisplay (dpy));
   Window root2, parent, *kids;
   unsigned int nkids;
 
+  if (version) *version = 0;
+
   if (! XQueryTree (dpy, root, &root2, &parent, &kids, &nkids))
     abort ();
   if (root != root2)
@@ -71,80 +69,285 @@ find_screensaver_window (dpy, progname)
       Atom type;
       int format;
       unsigned long nitems, bytesafter;
-      char *version;
+      char *v;
 
       if (XGetWindowProperty (dpy, kids[i],
-			      XInternAtom (dpy, "_SCREENSAVER_VERSION", False),
-			      0, 1, False, XA_STRING,
+			      XA_SCREENSAVER_VERSION,
+			      0, 200, False, XA_STRING,
 			      &type, &format, &nitems, &bytesafter,
-			      (unsigned char **) &version)
+			      (unsigned char **) &v)
 	  == Success
 	  && type != None)
-	return kids[i];
+	{
+	  if (version)
+	    *version = v;
+	  return kids[i];
+	}
     }
-  fprintf (stderr, "%s: no screensaver is running on display %s", progname,
+  fprintf (stderr, "%s: no screensaver is running on display %s\n", progname,
 	   DisplayString (dpy));
   exit (1);
 }
 
 
+void
+xscreensaver_command (Display *dpy, Atom command)
+{
+  char *v = 0;
+  Window window = find_screensaver_window (dpy, &v);
+
+  if (command == XA_SCREENSAVER_TIME ||
+      command == XA_SCREENSAVER_VERSION)
+    {
+      XClassHint hint;
+      memset (&hint, 0, sizeof(hint));
+      if (!v || !*v)
+	{
+	  fprintf (stderr, "%s: version property not set on window 0x%x?\n",
+		   progname, (unsigned int) window);
+	  exit (1);
+	}
+
+      XGetClassHint(dpy, window, &hint);
+      if (!hint.res_class)
+	{
+	  fprintf (stderr, "%s: class hints not set on window 0x%x?\n",
+		   progname, (unsigned int) window);
+	  exit (1);
+	}
+
+      fprintf (stdout, "%s %s", hint.res_class, v);
+
+      if (command != XA_SCREENSAVER_TIME)
+	{
+	  fprintf (stdout, "\n");
+	}
+      else
+	{
+	  Atom type;
+	  int format;
+	  unsigned long nitems, bytesafter;
+	  unsigned char *data = 0;
+	  XWindowAttributes xgwa;
+	  Bool active_p = False;
+
+	  xgwa.map_state = IsViewable;
+	  XGetWindowAttributes (dpy, window, &xgwa);
+
+	  if (XGetWindowProperty (dpy, window, XA_VROOT,
+				  0, 0, False, XA_WINDOW,
+				  &type, &format, &nitems, &bytesafter,
+				  &data)
+	      == Success
+	      && type != None)
+	    active_p = True;
+
+	  if (data) free (data);
+	  data = 0;
+
+	  if (XGetWindowProperty (dpy, window,
+				  XA_SCREENSAVER_TIME,
+				  0, 1, False, XA_INTEGER,
+				  &type, &format, &nitems, &bytesafter,
+				  &data)
+	      == Success
+	      && type == XA_INTEGER
+	      && data)
+	    {
+	      CARD32 time32 = *((CARD32 *)data);
+	      time_t tt = (time_t) time32;
+
+	      if (active_p)
+		fprintf (stdout, ": screen blanked since ");
+	      else
+		/* suggestions for a better way to phrase this are welcome. */
+		fprintf (stdout, ": screen non-blanked since ");
+	      fprintf (stdout, "%s", ctime(&tt));
+	      if (data) free (data);
+	    }
+	  else
+	    {
+	      if (data) free (data);
+	      fprintf (stdout, "\n");
+	      fflush (stdout);
+	      fprintf (stderr, "%s: no time on window 0x%x (%s %s).\n",
+		       progname, (unsigned int) window,
+		       hint.res_class, (v ? v : "???"));
+	      exit (1);
+	    }
+	}
+    }
+  else
+    {
+      XEvent event;
+      event.xany.type = ClientMessage;
+      event.xclient.display = dpy;
+      event.xclient.window = window;
+      event.xclient.message_type = XA_SCREENSAVER;
+      event.xclient.format = 32;
+      event.xclient.data.l[0] = (long) command;
+      if (! XSendEvent (dpy, window, False, 0L, &event))
+	{
+	  fprintf (stderr, "%s: XSendEvent(dpy, 0x%x ...) failed.\n",
+		   progname, (unsigned int) window);
+	  exit (1);
+	}
+    }
+  XSync (dpy, 0);
+}
+
+
+
+#ifdef STANDALONE
+static Atom XA_ACTIVATE, XA_DEACTIVATE, XA_CYCLE, XA_NEXT, XA_PREV;
+static Atom XA_EXIT, XA_RESTART, XA_DEMO, XA_PREFS, XA_LOCK;
+
+static char *progname;
+static char *screensaver_version;
+static char *usage = "\n\
+usage: %s -<option>\n\
+\n\
+  This program provides external control of a running xscreensaver process.\n\
+  Version %s, copyright (c) 1991-1998 Jamie Zawinski <jwz@jwz.org>.\n\
+\n\
+  The xscreensaver program is a daemon that runs in the background.\n\
+  You control a running xscreensaver process by sending it messages\n\
+  with this program, xscreensaver-command.  See the man pages for\n\
+  details.  These are the arguments understood by xscreensaver-command:\n\
+\n\
+  -demo         Ask the xscreensaver process to enter interactive demo mode.\n\
+\n\
+  -prefs        Ask the xscreensaver process to bring up the preferences\n\
+                panel.\n\
+\n\
+  -activate     Turn on the screensaver (blank the screen), as if the user\n\
+                had been idle for long enough.\n\
+\n\
+  -deactivate   Turns off the screensaver (un-blank the screen), as if user\n\
+                activity had been detected.\n\
+\n\
+  -cycle        If the screensaver is active (the screen is blanked), then\n\
+                stop the current graphics demo and run a new one (chosen\n\
+                randomly.)\n\
+\n\
+  -next         Like either -activate or -cycle, depending on which is more\n\
+                appropriate, except that the graphics hack that will be run\n\
+                is the next one in the list, instead of a randomly-chosen\n\
+                one.  In other words, repeatedly executing -next will cause\n\
+                the xscreensaver process to invoke each graphics demo\n\
+                sequentially.  (Though using the -demo option is probably\n\
+                an easier way to accomplish that.)\n\
+\n\
+  -prev         Like -next, but goes in the other direction.\n\
+\n\
+  -exit         Causes the xscreensaver process to exit gracefully.  This is\n\
+                roughly the same as killing the process with `kill', but it\n\
+                is easier, since you don't need to first figure out the pid.\n\
+                (Note that one must *never* kill xscreensaver with -9!)\n\
+\n\
+  -restart      Causes the screensaver process to exit and then restart with\n\
+                the same command line arguments as last time.  Do this after\n\
+                you've changed your X resource settings, to cause\n\
+                xscreensaver to notice the changes.\n\
+\n\
+  -lock         Tells the running xscreensaver process to lock the screen\n\
+                immediately.  This is like -activate, but forces locking as\n\
+                well, even if locking is not the default.\n\
+\n\
+  -version      Prints the version of xscreensaver that is currently running\n\
+                on the display -- that is, the actual version number of the\n\
+                running xscreensaver background process, rather than the\n\
+                version number of xscreensaver-command.\n\
+\n\
+  -time         Prints the time at which the screensaver last activated or\n\
+                deactivated (roughly, how long the user has been idle or\n\
+                non-idle -- but not quite, since it only tells you when the\n\
+                screen became blanked or un-blanked.)\n\
+\n\
+  See the man page for more details.\n\
+  For updates, check http://www.jwz.org/xscreensaver/\n\
+\n";
+
 #define USAGE() \
- { fprintf (stderr, usage, argv[0], screensaver_version); exit (1); }
+ { fprintf (stderr, usage, progname, screensaver_version); exit (1); }
 
-void
-main (argc, argv)
-     int argc;
-     char **argv;
+int
+main (int argc, char **argv)
 {
   Display *dpy;
-  Window window;
-  XEvent event;
   int i;
-  char *message = 0, *dpyname = 0;
-  screensaver_version = malloc (5);
+  char *dpyname = 0;
+  Atom *cmd = 0;
+
+  progname = argv[0];
+  screensaver_version = (char *) malloc (5);
   memcpy (screensaver_version, screensaver_id + 17, 4);
   screensaver_version [4] = 0;
+
   for (i = 1; i < argc; i++)
     {
-      char *s = argv [i];
-      int L = strlen (s);
+      const char *s = argv [i];
+      int L;
+      if (s[0] == '-' && s[1] == '-') s++;
+      L = strlen (s);
       if (L < 2) USAGE ();
       if (!strncmp (s, "-display", L))		dpyname = argv [++i];
-      else if (message) USAGE ()
-      else if (!strncmp (s, "-activate", L))	message = "ACTIVATE";
-      else if (!strncmp (s, "-deactivate", L))	message = "DEACTIVATE";
-      else if (!strncmp (s, "-cycle", L))	message = "CYCLE";
-      else if (!strncmp (s, "-next", L))	message = "NEXT";
-      else if (!strncmp (s, "-prev", L))	message = "PREV";
-      else if (!strncmp (s, "-exit", L))	message = "EXIT";
-      else if (!strncmp (s, "-restart", L))	message = "RESTART";
-      else if (!strncmp (s, "-demo", L))	message = "DEMO";
-      else if (!strncmp (s, "-lock", L))	message = "LOCK";
+      else if (cmd) USAGE ()
+      else if (!strncmp (s, "-activate", L))   cmd = &XA_ACTIVATE;
+      else if (!strncmp (s, "-deactivate", L)) cmd = &XA_DEACTIVATE;
+      else if (!strncmp (s, "-cycle", L))      cmd = &XA_CYCLE;
+      else if (!strncmp (s, "-next", L))       cmd = &XA_NEXT;
+      else if (!strncmp (s, "-prev", L))       cmd = &XA_PREV;
+      else if (!strncmp (s, "-exit", L))       cmd = &XA_EXIT;
+      else if (!strncmp (s, "-restart", L))    cmd = &XA_RESTART;
+      else if (!strncmp (s, "-demo", L))       cmd = &XA_DEMO;
+      else if (!strncmp (s, "-preferences",L)) cmd = &XA_PREFS;
+      else if (!strncmp (s, "-prefs",L))       cmd = &XA_PREFS;
+      else if (!strncmp (s, "-lock", L))       cmd = &XA_LOCK;
+      else if (!strncmp (s, "-version", L))    cmd = &XA_SCREENSAVER_VERSION;
+      else if (!strncmp (s, "-time", L))       cmd = &XA_SCREENSAVER_TIME;
       else USAGE ();
     }
-  if (! message) USAGE ();
+  if (!cmd)
+    USAGE ();
+
   if (!dpyname) dpyname = (char *) getenv ("DISPLAY");
   dpy = XOpenDisplay (dpyname);
   if (!dpy)
     {
-      fprintf (stderr, "%s: can't open display %s\n", argv[0],
+      fprintf (stderr, "%s: can't open display %s\n", progname,
 	       (dpyname ? dpyname : "(null)"));
       exit (1);
     }
-  window = find_screensaver_window (dpy, argv[0]);
-
-  event.xany.type = ClientMessage;
-  event.xclient.display = dpy;
-  event.xclient.window = window;
-  event.xclient.message_type = XInternAtom (dpy, "SCREENSAVER", False);
-  event.xclient.format = 32;
-  event.xclient.data.l[0] = (long) XInternAtom (dpy, message, False);
-  if (! XSendEvent (dpy, window, False, 0L, &event))
-    {
-      fprintf (stderr, "%s: XSendEvent(dpy, 0x%x ...) failed.\n", argv [0],
-	       (unsigned int) window);
-      exit (1);
-    }
+
+  XA_VROOT = XInternAtom (dpy, "__SWM_VROOT", False);
+  XA_SCREENSAVER = XInternAtom (dpy, "SCREENSAVER", False);
+  XA_SCREENSAVER_VERSION = XInternAtom (dpy, "_SCREENSAVER_VERSION",False);
+  XA_SCREENSAVER_TIME = XInternAtom (dpy, "_SCREENSAVER_TIME", False);
+  XA_ACTIVATE = XInternAtom (dpy, "ACTIVATE", False);
+  XA_DEACTIVATE = XInternAtom (dpy, "DEACTIVATE", False);
+  XA_RESTART = XInternAtom (dpy, "RESTART", False);
+  XA_CYCLE = XInternAtom (dpy, "CYCLE", False);
+  XA_NEXT = XInternAtom (dpy, "NEXT", False);
+  XA_PREV = XInternAtom (dpy, "PREV", False);
+  XA_EXIT = XInternAtom (dpy, "EXIT", False);
+  XA_DEMO = XInternAtom (dpy, "DEMO", False);
+  XA_PREFS = XInternAtom (dpy, "PREFS", False);
+  XA_LOCK = XInternAtom (dpy, "LOCK", False);
+
   XSync (dpy, 0);
+
+  if (*cmd == XA_ACTIVATE || *cmd == XA_LOCK ||
+      *cmd == XA_NEXT || *cmd == XA_PREV)
+    /* People never guess that KeyRelease deactivates the screen saver too,
+       so if we're issuing an activation command, wait a second. */
+    sleep (1);
+
+  xscreensaver_command(dpy, *cmd);
+
+  fflush (stdout);
+  fflush (stderr);
   exit (0);
 }
+
+#endif /* STANDALONE */