X-Git-Url: http://git.hungrycats.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=driver%2Fxscreensaver-command.c;h=5ec74417b4dee28b1432f2755cdb23bad11a378e;hb=de460e831dc8578acfa8b72251ab9346c99c1f96;hp=a267f4e7538659fec2a1cc15a984f342bbd2a296;hpb=ffd8c0873576a9e3065696a624dce6b766b77062;p=xscreensaver

diff --git a/driver/xscreensaver-command.c b/driver/xscreensaver-command.c
index a267f4e7..5ec74417 100644
--- a/driver/xscreensaver-command.c
+++ b/driver/xscreensaver-command.c
@@ -1,4 +1,4 @@
-/* xscreensaver-command, Copyright (c) 1991-2004 Jamie Zawinski <jwz@jwz.org>
+/* xscreensaver-command, Copyright (c) 1991-2008 Jamie Zawinski <jwz@jwz.org>
  *
  * Permission to use, copy, modify, distribute, and sell this software and its
  * documentation for any purpose is hereby granted without fee, provided that
@@ -23,7 +23,7 @@
 # include <unistd.h>
 #endif
 
-#include <X11/Xproto.h>		/* for CARD32 */
+/* #include <X11/Xproto.h>	/ * for CARD32 */
 #include <X11/Xlib.h>
 #include <X11/Xatom.h>
 #include <X11/Xutil.h>		/* for XGetClassHint() */
@@ -31,6 +31,14 @@
 
 #include <X11/Intrinsic.h>	/* only needed to get through xscreensaver.h */
 
+
+/* You might think that to read an array of 32-bit quantities out of a
+   server-side property, you would pass an array of 32-bit data quantities
+   into XGetWindowProperty().  You would be wrong.  You have to use an array
+   of longs, even if long is 64 bits (using 32 of each 64.)
+ */
+typedef long PROP32;
+
 #include "remote.h"
 #include "version.h"
 
@@ -57,7 +65,7 @@ static char *usage = "\n\
 usage: %s -<option>\n\
 \n\
   This program provides external control of a running xscreensaver process.\n\
-  Version %s, copyright (c) 1991-2003 Jamie Zawinski <jwz@jwz.org>.\n\
+  Version %s, copyright (c) 1991-2008 Jamie Zawinski <jwz@jwz.org>.\n\
 \n\
   The xscreensaver program is a daemon that runs in the background.\n\
   You control a running xscreensaver process by sending it messages\n\
@@ -95,28 +103,19 @@ usage: %s -<option>\n\
                 with a particular graphics demo.  (The first element in the\n\
                 list is numbered 1, not 0.)\n\
 \n\
-  -exit         Causes the xscreensaver process to exit gracefully.  This is\n\
-                roughly the same as killing the process with `kill', but it\n\
-                is easier, since you don't need to first figure out the pid.\n\
+  -exit         Causes the xscreensaver process to exit gracefully.\n\
+                This does nothing if the display is currently locked.\n\
                 (Note that one must *never* kill xscreensaver with -9!)\n\
 \n\
   -restart      Causes the screensaver process to exit and then restart with\n\
-                the same command line arguments as last time.  Do this after\n\
-                you've changed your X resource settings, to cause\n\
-                xscreensaver to notice the changes.\n\
+                the same command line arguments as last time.  You shouldn't\n\
+                really need to do this, since xscreensaver notices when the\n\
+                .xscreensaver file has changed and re-reads it as needed.\n\
 \n\
   -lock         Tells the running xscreensaver process to lock the screen\n\
                 immediately.  This is like -activate, but forces locking as\n\
                 well, even if locking is not the default.  If the saver is\n\
                 already active, this causes it to be locked as well.\n\
-\n\
-  -throttle     Temporarily switch to ``blank screen'' mode, and don't run\n\
-                any display modes at all, until the screensaver is next\n\
-                de-activated.  This is useful if you're using a machine\n\
-                remotely, and you find that some display modes are using too\n\
-                much CPU.\n\
-\n\
-  -unthrottle   Turn `-throttle' off and resume normal behavior.\n\
 \n\
   -version      Prints the version of xscreensaver that is currently running\n\
                 on the display -- that is, the actual version number of the\n\
@@ -138,6 +137,13 @@ usage: %s -<option>\n\
   For updates, check http://www.jwz.org/xscreensaver/\n\
 \n";
 
+/* Note: The "-throttle" command is deprecated -- it predates the XDPMS
+   extension.  Instead of using -throttle, users should instead just
+   power off the monitor (e.g., "xset dpms force off".)  In a few
+   minutes, the xscreensaver daemon will notice that the monitor is
+   off, and cease running hacks.
+ */
+
 #define USAGE() do { \
  fprintf (stderr, usage, progname, screensaver_version); exit (1); \
  } while(0)
@@ -153,6 +159,7 @@ main (int argc, char **argv)
   Atom *cmd = 0;
   long arg = 0L;
   char *s;
+  Atom XA_WATCH = 0;  /* kludge: not really an atom */
 
   progname = argv[0];
   s = strrchr (progname, '/');
@@ -187,7 +194,7 @@ main (int argc, char **argv)
       else if (!strncmp (s, "-unthrottle", L)) cmd = &XA_UNTHROTTLE;
       else if (!strncmp (s, "-version", L))    cmd = &XA_SCREENSAVER_VERSION;
       else if (!strncmp (s, "-time", L))       cmd = &XA_SCREENSAVER_STATUS;
-      else if (!strncmp (s, "-watch", L))      cmd = (Atom *) &watch;
+      else if (!strncmp (s, "-watch", L))      cmd = &XA_WATCH;
       else USAGE ();
 
       if (cmd == &XA_SELECT || cmd == &XA_DEMO)
@@ -301,7 +308,7 @@ main (int argc, char **argv)
 
   XSync (dpy, 0);
 
-  if (cmd == (Atom *) &watch)
+  if (cmd == &XA_WATCH)
     {
       i = watch (dpy);
       exit (i);
@@ -326,7 +333,7 @@ watch (Display *dpy)
   Window window = RootWindow (dpy, 0);
   XWindowAttributes xgwa;
   XEvent event;
-  CARD32 *last = 0;
+  PROP32 *last = 0;
 
   if (v) free (v);
   XGetWindowAttributes (dpy, window, &xgwa);
@@ -358,7 +365,7 @@ watch (Display *dpy)
               char *s;
               Bool changed = False;
               Bool running = False;
-              CARD32 *data = (CARD32 *) dataP;
+              PROP32 *data = (PROP32 *) dataP;
 
               if (type != XA_INTEGER || nitems < 3)
                 {