#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/crc32.h>
+#include <asm/mipsregs.h>
#include <asm/irq.h>
#include <asm/bitops.h>
#include <asm/io.h>
static void *dma_alloc(size_t, dma_addr_t *);
static void dma_free(void *, size_t);
static void hard_stop(struct net_device *);
+static void enable_rx_tx(struct net_device *dev);
static int __init au1000_probe1(struct net_device *, long, int, int);
static int au1000_init(struct net_device *);
static int au1000_open(struct net_device *);
static inline void update_tx_stats(struct net_device *, u32, u32);
static inline void update_rx_stats(struct net_device *, u32);
static void au1000_timer(unsigned long);
-static void cleanup_buffers(struct net_device *);
static int au1000_ioctl(struct net_device *, struct ifreq *, int);
static int mdio_read(struct net_device *, int, int);
static void mdio_write(struct net_device *, int, int, u16);
-static inline void sync(void);
+static void dump_mii(struct net_device *dev, int phy_id);
+// externs
extern void ack_rise_edge_irq(unsigned int);
-
-static int next_dev;
+extern int get_ethernet_addr(char *ethernet_addr);
+extern inline void str2eaddr(unsigned char *ea, unsigned char *str);
+extern inline unsigned char str2hexnum(unsigned char c);
+extern char * __init prom_getcmdline(void);
/*
* Theory of operation
/*
- * Base address and interupt of the Au1000 ethernet macs
+ * Base address and interupt of the Au1xxx ethernet macs
*/
static struct {
unsigned int port;
int irq;
} au1000_iflist[NUM_INTERFACES] = {
- {AU1000_ETH0_BASE, AU1000_ETH0_IRQ},
- {AU1000_ETH1_BASE, AU1000_ETH1_IRQ}
-};
+ {AU1000_ETH0_BASE, AU1000_ETH0_IRQ},
+ {AU1000_ETH1_BASE, AU1000_ETH1_IRQ}
+ },
+ au1500_iflist[NUM_INTERFACES] = {
+ {AU1500_ETH0_BASE, AU1000_ETH0_IRQ},
+ {AU1500_ETH1_BASE, AU1000_ETH1_IRQ}
+ };
static char version[] __devinitdata =
- "au1000eth.c:0.1 ppopov@mvista.com\n";
+ "au1000eth.c:1.0 ppopov@mvista.com\n";
-// FIX! Need real Ethernet addresses
-static unsigned char au1000_mac_addr[2][6] __devinitdata = {
- {0x00, 0x50, 0xc2, 0x0c, 0x30, 0x00},
- {0x00, 0x50, 0xc2, 0x0c, 0x40, 0x00}
+/* These addresses are only used if yamon doesn't tell us what
+ * the mac address is, and the mac address is not passed on the
+ * command line.
+ */
+static unsigned char au1000_mac_addr[6] __devinitdata = {
+ 0x00, 0x50, 0xc2, 0x0c, 0x30, 0x00
};
#define nibswap(x) ((((x) >> 4) & 0x0f) | (((x) << 4) & 0xf0))
#define cpu_to_dma32 cpu_to_be32
#define dma32_to_cpu be32_to_cpu
-/* CPU pipeline flush */
-static inline void sync(void)
-{
- asm volatile ("sync");
-}
/* FIXME
* All of the PHY code really should be detached from the MAC
{"unknown",
"10Base2", "10BaseT",
"AUI",
- "100BaseT", "100BaseTX", "100BaseFX"};
+ "100BaseT", "100BaseTX", "100BaseFX"
+ };
int bcm_5201_init(struct net_device *dev, int phy_addr)
{
data = mdio_read(dev, phy_addr, MII_CONTROL);
data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
mdio_write(dev, phy_addr, MII_CONTROL, data);
- //dump_mii(dev, phy_addr);
+
+ if (au1000_debug > 4) dump_mii(dev, phy_addr);
return 0;
}
else {
*link = 0;
*speed = 0;
+ dev->if_port = IF_PORT_UNKNOWN;
+ }
+ return 0;
+}
+
+int lsi_80227_init(struct net_device *dev, int phy_addr)
+{
+ if (au1000_debug > 4)
+ printk("lsi_80227_init\n");
+
+ /* restart auto-negotiation */
+ mdio_write(dev, phy_addr, 0, 0x3200);
+
+ /* set up LEDs to correct display */
+ mdio_write(dev, phy_addr, 17, 0xffc0);
+
+ if (au1000_debug > 4)
+ dump_mii(dev, phy_addr);
+ return 0;
+}
+
+int lsi_80227_reset(struct net_device *dev, int phy_addr)
+{
+ s16 mii_control, timeout;
+
+ if (au1000_debug > 4) {
+ printk("lsi_80227_reset\n");
+ dump_mii(dev, phy_addr);
+ }
+
+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
+ mdelay(1);
+ for (timeout = 100; timeout > 0; --timeout) {
+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
+ if ((mii_control & MII_CNTL_RESET) == 0)
+ break;
+ mdelay(1);
+ }
+ if (mii_control & MII_CNTL_RESET) {
+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
+ return -1;
}
return 0;
}
+int
+lsi_80227_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
+{
+ u16 mii_data;
+ struct au1000_private *aup;
+
+ if (!dev) {
+ printk(KERN_ERR "lsi_80227_status error: NULL dev\n");
+ return -1;
+ }
+ aup = (struct au1000_private *) dev->priv;
+
+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
+ if (mii_data & MII_STAT_LINK) {
+ *link = 1;
+ mii_data = mdio_read(dev, aup->phy_addr, MII_LSI_STAT);
+ if (mii_data & MII_LSI_STAT_SPD) {
+ if (mii_data & MII_LSI_STAT_FDX) {
+ *speed = IF_PORT_100BASEFX;
+ dev->if_port = IF_PORT_100BASEFX;
+ }
+ else {
+ *speed = IF_PORT_100BASETX;
+ dev->if_port = IF_PORT_100BASETX;
+ }
+ }
+ else {
+ *speed = IF_PORT_10BASET;
+ dev->if_port = IF_PORT_10BASET;
+ }
+
+ }
+ else {
+ *link = 0;
+ *speed = 0;
+ dev->if_port = IF_PORT_UNKNOWN;
+ }
+ return 0;
+}
int am79c901_init(struct net_device *dev, int phy_addr)
{
am79c901_status,
};
+struct phy_ops lsi_80227_ops = {
+ lsi_80227_init,
+ lsi_80227_reset,
+ lsi_80227_status,
+};
+
static struct mii_chip_info {
const char * name;
u16 phy_id0;
} mii_chip_table[] = {
{"Broadcom BCM5201 10/100 BaseT PHY", 0x0040, 0x6212, &bcm_5201_ops },
{"AMD 79C901 HomePNA PHY", 0x0000, 0x35c8, &am79c901_ops },
+ {"LSI 80227 10/100 BaseT PHY", 0x0016, 0xf840, &lsi_80227_ops },
{0,},
};
while (aup->mac->mii_control & MAC_MII_BUSY) {
mdelay(1);
if (--timedout == 0) {
- printk(KERN_ERR "%s: read_MII busy timeout!!\n", dev->name);
+ printk(KERN_ERR "%s: read_MII busy timeout!!\n",
+ dev->name);
return -1;
}
}
while (aup->mac->mii_control & MAC_MII_BUSY) {
mdelay(1);
if (--timedout == 0) {
- printk(KERN_ERR "%s: mdio_read busy timeout!!\n", dev->name);
+ printk(KERN_ERR "%s: mdio_read busy timeout!!\n",
+ dev->name);
return -1;
}
}
while (aup->mac->mii_control & MAC_MII_BUSY) {
mdelay(1);
if (--timedout == 0) {
- printk(KERN_ERR "%s: mdio_write busy timeout!!\n", dev->name);
+ printk(KERN_ERR "%s: mdio_write busy timeout!!\n",
+ dev->name);
return;
}
}
phy_id1 = mdio_read(dev, phy_addr, MII_PHY_ID1);
/* search our mii table for the current mii */
- for (i = 0; mii_chip_table[i].phy_id1; i++)
+ for (i = 0; mii_chip_table[i].phy_id1; i++) {
if (phy_id0 == mii_chip_table[i].phy_id0 &&
phy_id1 == mii_chip_table[i].phy_id1) {
struct mii_phy * mii_phy;
- printk(KERN_INFO "%s: %s found at phy address %d\n",
- dev->name, mii_chip_table[i].name, phy_addr);
- if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) != NULL) {
+ printk(KERN_INFO "%s: %s at phy address %d\n",
+ dev->name, mii_chip_table[i].name,
+ phy_addr);
+ mii_phy = kmalloc(sizeof(struct mii_phy),
+ GFP_KERNEL);
+ if (mii_phy) {
mii_phy->chip_info = mii_chip_table+i;
mii_phy->phy_addr = phy_addr;
- //mii_phy->status = mdio_read(dev, phy_addr, MII_STATUS);
mii_phy->next = aup->mii;
- aup->phy_ops = mii_chip_table[i].phy_ops;
+ aup->phy_ops =
+ mii_chip_table[i].phy_ops;
aup->mii = mii_phy;
+ aup->phy_ops->phy_init(dev,phy_addr);
+ } else {
+ printk(KERN_ERR "%s: out of memory\n",
+ dev->name);
+ return -1;
}
/* the current mii is on our mii_info_table,
try next address */
break;
}
+ }
}
if (aup->mii == NULL) {
/* use last PHY */
aup->phy_addr = aup->mii->phy_addr;
- printk(KERN_INFO "%s: Using %s as default\n", dev->name, aup->mii->chip_info->name);
+ printk(KERN_INFO "%s: Using %s as default\n",
+ dev->name, aup->mii->chip_info->name);
return 0;
}
if (ret != NULL) {
memset(ret, 0, size);
*dma_handle = virt_to_bus(ret);
- ret = KSEG0ADDR(ret);
+ ret = (void *)KSEG0ADDR(ret);
}
return ret;
}
static void dma_free(void *vaddr, size_t size)
{
- vaddr = KSEG0ADDR(vaddr);
+ vaddr = (void *)KSEG0ADDR(vaddr);
free_pages((unsigned long) vaddr, get_order(size));
}
+static void enable_rx_tx(struct net_device *dev)
+{
+ struct au1000_private *aup = (struct au1000_private *) dev->priv;
+
+ if (au1000_debug > 4)
+ printk(KERN_INFO "%s: enable_rx_tx\n", dev->name);
+
+ aup->mac->control |= (MAC_RX_ENABLE | MAC_TX_ENABLE);
+ au_sync_delay(10);
+}
+
static void hard_stop(struct net_device *dev)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
printk(KERN_INFO "%s: hard stop\n", dev->name);
aup->mac->control &= ~(MAC_RX_ENABLE | MAC_TX_ENABLE);
- sync();
- mdelay(10);
+ au_sync_delay(10);
}
u32 flags;
struct au1000_private *aup = (struct au1000_private *) dev->priv;
- if (au1000_debug > 4)
- printk(KERN_INFO "%s: reset mac, aup %x\n", dev->name, (unsigned)aup);
+ if (au1000_debug > 4)
+ printk(KERN_INFO "%s: reset mac, aup %x\n",
+ dev->name, (unsigned)aup);
spin_lock_irqsave(&aup->lock, flags);
del_timer(&aup->timer);
hard_stop(dev);
- *aup->enable |= MAC_DMA_RESET;
- sync();
- mdelay(10);
+ *aup->enable = MAC_EN_CLOCK_ENABLE;
+ au_sync_delay(2);
+ *aup->enable = 0;
+ au_sync_delay(2);
aup->tx_full = 0;
spin_unlock_irqrestore(&aup->lock, flags);
}
-static void cleanup_buffers(struct net_device *dev)
-{
- int i;
- struct au1000_private *aup = (struct au1000_private *) dev->priv;
-
- for (i=0; i<NUM_RX_DMA; i++) {
- if (aup->rx_db_inuse[i]) {
- ReleaseDB(aup, aup->rx_db_inuse[i]);
- aup->rx_db_inuse[i] = 0;
- }
- }
-
- for (i=0; i<NUM_TX_DMA; i++) {
- if (aup->tx_db_inuse[i]) {
- ReleaseDB(aup, aup->tx_db_inuse[i]);
- aup->tx_db_inuse[i] = 0;
- }
- }
-}
-
/*
* Setup the receive and transmit "rings". These pointers are the addresses
int i;
for (i=0; i<NUM_RX_DMA; i++) {
- aup->rx_dma_ring[i] = (volatile rx_dma_t *) ioremap_nocache((unsigned long)
- (rx_base + sizeof(rx_dma_t)*i), sizeof(rx_dma_t));
+ aup->rx_dma_ring[i] =
+ (volatile rx_dma_t *) (rx_base + sizeof(rx_dma_t)*i);
}
for (i=0; i<NUM_TX_DMA; i++) {
- aup->tx_dma_ring[i] = (volatile tx_dma_t *)ioremap_nocache((unsigned long)
- (tx_base + sizeof(tx_dma_t)*i), sizeof(tx_dma_t));
+ aup->tx_dma_ring[i] =
+ (volatile tx_dma_t *) (tx_base + sizeof(tx_dma_t)*i);
}
}
-/*
- * Probe for a AU1000 ethernet controller.
- */
-int __init au1000_probe(struct net_device *dev)
+static int __init au1000_init_module(void)
{
- int base_addr = au1000_iflist[next_dev].port;
- int irq = au1000_iflist[next_dev].irq;
-
-#ifndef CONFIG_MIPS_AU1000_ENET
- return -ENODEV;
-#endif
-
- if (au1000_debug > 4)
- printk(KERN_INFO "%s: au1000_probe base_addr %x\n",
- dev->name, base_addr);
-
- if (next_dev >= NUM_INTERFACES) {
- return -ENODEV;
- }
- if (au1000_probe1(dev, base_addr, irq, next_dev) == 0) {
- next_dev++;
- return 0;
+ int i;
+ int prid;
+ int base_addr, irq;
+
+ prid = read_32bit_cp0_register(CP0_PRID);
+ for (i=0; i<NUM_INTERFACES; i++) {
+ if ( (prid & 0xffff0000) == 0x00030000 ) {
+ base_addr = au1000_iflist[i].port;
+ irq = au1000_iflist[i].irq;
+ } else if ( (prid & 0xffff0000) == 0x01030000 ) {
+ base_addr = au1500_iflist[i].port;
+ irq = au1500_iflist[i].irq;
+ } else {
+ printk(KERN_ERR "au1000 eth: unknown Processor ID\n");
+ return -ENODEV;
+ }
+ if (au1000_probe1(NULL, base_addr, irq, i) != 0) {
+ return -ENODEV;
+ }
}
- next_dev++;
- return -ENODEV;
+ return 0;
}
-
-
static int __init
au1000_probe1(struct net_device *dev, long ioaddr, int irq, int port_num)
{
struct au1000_private *aup = NULL;
int i, retval = 0;
db_dest_t *pDB, *pDBfree;
- u16 link, speed;
-
- if ((ioaddr != AU1000_ETH0_BASE) && (ioaddr != AU1000_ETH1_BASE)) {
- return -ENODEV;
- }
+ char *pmac, *argptr;
+ char ethaddr[6];
if (!request_region(ioaddr, MAC_IOSIZE, "Au1000 ENET")) {
return -ENODEV;
return -ENODEV;
}
- printk("%s: Au1000 ethernet found at 0x%lx, irq %d\n",
- dev->name, ioaddr, irq);
-
+ printk("%s: Au1xxx ethernet found at 0x%lx, irq %d\n",
+ dev->name, ioaddr, irq);
/* Initialize our private structure */
if (dev->priv == NULL) {
- aup = (struct au1000_private *) kmalloc(sizeof(*aup), GFP_KERNEL);
+ aup = (struct au1000_private *)
+ kmalloc(sizeof(*aup), GFP_KERNEL);
if (aup == NULL) {
retval = -ENOMEM;
goto free_region;
/* Allocate the data buffers */
- aup->vaddr = (u32)dma_alloc(MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS), &aup->dma_addr);
+ aup->vaddr = (u32)dma_alloc(MAX_BUF_SIZE *
+ (NUM_TX_BUFFS+NUM_RX_BUFFS), &aup->dma_addr);
if (!aup->vaddr) {
retval = -ENOMEM;
goto free_region;
}
/* aup->mac is the base address of the MAC's registers */
- aup->mac = (volatile mac_reg_t *)ioremap_nocache((unsigned long)ioaddr, sizeof(*aup->mac));
+ aup->mac = (volatile mac_reg_t *)((unsigned long)ioaddr);
/* Setup some variables for quick register address access */
- if (ioaddr == AU1000_ETH0_BASE) {
- aup->enable = (volatile u32 *)
- ioremap_nocache((unsigned long)MAC0_ENABLE, sizeof(*aup->enable));
- memcpy(dev->dev_addr, au1000_mac_addr[0], sizeof(dev->dev_addr));
+ switch (ioaddr) {
+ case AU1000_ETH0_BASE:
+ case AU1500_ETH0_BASE:
+ /* check env variables first */
+ if (!get_ethernet_addr(ethaddr)) {
+ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
+ } else {
+ /* Check command line */
+ argptr = prom_getcmdline();
+ if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
+ printk(KERN_INFO "%s: No mac address found\n",
+ dev->name);
+ /* use the hard coded mac addresses */
+ } else {
+ str2eaddr(ethaddr, pmac + strlen("ethaddr="));
+ memcpy(au1000_mac_addr, ethaddr,
+ sizeof(dev->dev_addr));
+ }
+ }
+ if (ioaddr == AU1000_ETH0_BASE)
+ aup->enable = (volatile u32 *)
+ ((unsigned long)AU1000_MAC0_ENABLE);
+ else
+ aup->enable = (volatile u32 *)
+ ((unsigned long)AU1500_MAC0_ENABLE);
+ memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr));
setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
- }
- else if (ioaddr == AU1000_ETH1_BASE) {
- aup->enable = (volatile u32 *)
- ioremap_nocache((unsigned long)MAC1_ENABLE, sizeof(*aup->enable));
- memcpy(dev->dev_addr, au1000_mac_addr[1], sizeof(dev->dev_addr));
+ break;
+ case AU1000_ETH1_BASE:
+ case AU1500_ETH1_BASE:
+ if (ioaddr == AU1000_ETH1_BASE)
+ aup->enable = (volatile u32 *)
+ ((unsigned long)AU1000_MAC1_ENABLE);
+ else
+ aup->enable = (volatile u32 *)
+ ((unsigned long)AU1500_MAC1_ENABLE);
+ memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr));
+ dev->dev_addr[4] += 0x10;
setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
- }
- else { /* should never happen */
- printk (KERN_ERR "au1000 eth: bad ioaddr %x\n", (unsigned)ioaddr);
- retval = -ENODEV;
- goto free_region;
+ break;
+ default:
+ printk(KERN_ERR "%s: bad ioaddr\n", dev->name);
+ break;
+
}
aup->phy_addr = PHY_ADDRESS;
+
/* bring the device out of reset, otherwise probing the mii
* will hang */
- *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2 |
- MAC_EN_CLOCK_ENABLE | MAC_EN_TOSS;
- sync();
- mdelay(2);
+ *aup->enable = MAC_EN_CLOCK_ENABLE;
+ au_sync_delay(2);
+ *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 |
+ MAC_EN_RESET2 | MAC_EN_CLOCK_ENABLE;
+ au_sync_delay(2);
+
if (mii_probe(dev) != 0) {
goto free_region;
}
- aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
- if (!link) {
- printk(KERN_INFO "%s: link down resetting...\n", dev->name);
- aup->phy_ops->phy_reset(dev, aup->phy_addr);
- aup->phy_ops->phy_init(dev, aup->phy_addr);
- }
- else {
- printk(KERN_INFO "%s: link up (%s)\n", dev->name, phy_link[speed]);
- }
pDBfree = NULL;
/* setup the data buffer descriptors and attach a buffer to each one */
ether_setup(dev);
/*
- * The boot code uses the ethernet controller, so reset it to start fresh.
- * au1000_init() expects that the device is in reset state.
+ * The boot code uses the ethernet controller, so reset it to start
+ * fresh. au1000_init() expects that the device is in reset state.
*/
reset_mac(dev);
-
return 0;
free_region:
release_region(ioaddr, MAC_IOSIZE);
unregister_netdev(dev);
- if (aup->vaddr)
- dma_free((void *)aup->vaddr, MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS));
+ if (aup->vaddr)
+ dma_free((void *)aup->vaddr,
+ MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS));
if (dev->priv != NULL)
kfree(dev->priv);
kfree(dev);
struct au1000_private *aup = (struct au1000_private *) dev->priv;
u32 flags;
int i;
- u32 value, control;
+ u32 control;
+ u16 link, speed;
- if (au1000_debug > 4) printk("%s: au1000_init", dev->name);
+ if (au1000_debug > 4) printk("%s: au1000_init\n", dev->name);
spin_lock_irqsave(&aup->lock, flags);
/* bring the device out of reset */
- value = MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2 |
- MAC_EN_CLOCK_ENABLE | MAC_EN_TOSS;
- *aup->enable = value;
- sync();
- mdelay(200);
+ *aup->enable = MAC_EN_CLOCK_ENABLE;
+ au_sync_delay(2);
+ *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 |
+ MAC_EN_RESET2 | MAC_EN_CLOCK_ENABLE;
+ au_sync_delay(20);
aup->mac->control = 0;
aup->tx_head = (aup->tx_dma_ring[0]->buff_stat & 0xC) >> 2;
for (i=0; i<NUM_RX_DMA; i++) {
aup->rx_dma_ring[i]->buff_stat |= RX_DMA_ENABLE;
}
+ au_sync();
- sync();
+ aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE;
#ifndef CONFIG_CPU_LITTLE_ENDIAN
control |= MAC_BIG_ENDIAN;
#endif
+ if (link && (dev->if_port == IF_PORT_100BASEFX)) {
+ control |= MAC_FULL_DUPLEX;
+ }
aup->mac->control = control;
+ au_sync();
spin_unlock_irqrestore(&aup->lock, flags);
return 0;
{
struct net_device *dev = (struct net_device *)data;
struct au1000_private *aup = (struct au1000_private *) dev->priv;
- u16 mii_data, link, speed;
+ unsigned char if_port;
+ u16 link, speed;
if (!dev) {
/* fatal error, don't restart the timer */
printk(KERN_ERR "au1000_timer error: NULL dev\n");
return;
}
- if (!(dev->flags & IFF_UP)) {
- goto set_timer;
- }
+ if_port = dev->if_port;
if (aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed) == 0) {
if (link) {
if (!(dev->flags & IFF_RUNNING)) {
netif_carrier_on(dev);
dev->flags |= IFF_RUNNING;
- printk(KERN_DEBUG "%s: link up\n", dev->name);
+ printk(KERN_INFO "%s: link up\n", dev->name);
}
}
else {
netif_carrier_off(dev);
dev->flags &= ~IFF_RUNNING;
dev->if_port = 0;
- printk(KERN_DEBUG "%s: link down\n", dev->name);
+ printk(KERN_INFO "%s: link down\n", dev->name);
}
}
}
-set_timer:
+ if (link && (dev->if_port != if_port) &&
+ (dev->if_port != IF_PORT_UNKNOWN)) {
+ hard_stop(dev);
+ if (dev->if_port == IF_PORT_100BASEFX) {
+ printk(KERN_INFO "%s: going to full duplex\n",
+ dev->name);
+ aup->mac->control |= MAC_FULL_DUPLEX;
+ au_sync_delay(1);
+ }
+ else {
+ aup->mac->control &= ~MAC_FULL_DUPLEX;
+ au_sync_delay(1);
+ }
+ enable_rx_tx(dev);
+ }
+
aup->timer.expires = RUN_AT((1*HZ));
aup->timer.data = (unsigned long)dev;
aup->timer.function = &au1000_timer; /* timer handler */
}
netif_start_queue(dev);
- if ((retval = request_irq(dev->irq, &au1000_interrupt, 0, dev->name, dev))) {
- printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq);
+ if ((retval = request_irq(dev->irq, &au1000_interrupt, 0,
+ dev->name, dev))) {
+ printk(KERN_ERR "%s: unable to get IRQ %d\n",
+ dev->name, dev->irq);
MOD_DEC_USE_COUNT;
return retval;
}
return 0;
}
+static void __exit au1000_cleanup_module(void)
+{
+}
+
-static inline void update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
+static inline void
+update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
struct net_device_stats *ps = &aup->stats;
ps->tx_bytes += pkt_len;
if (status & TX_FRAME_ABORTED) {
- ps->tx_errors++;
- ps->tx_aborted_errors++;
- if (status & (TX_NO_CARRIER | TX_LOSS_CARRIER))
- ps->tx_carrier_errors++;
+ if (dev->if_port == IF_PORT_100BASEFX) {
+ if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) {
+ /* any other tx errors are only valid
+ * in half duplex mode */
+ ps->tx_errors++;
+ ps->tx_aborted_errors++;
+ }
+ }
+ else {
+ ps->tx_errors++;
+ ps->tx_aborted_errors++;
+ if (status & (TX_NO_CARRIER | TX_LOSS_CARRIER))
+ ps->tx_carrier_errors++;
+ }
}
}
update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
ptxd->buff_stat &= ~TX_T_DONE;
ptxd->len = 0;
- sync();
+ au_sync();
aup->tx_tail = (aup->tx_tail + 1) & (NUM_TX_DMA - 1);
ptxd = aup->tx_dma_ring[aup->tx_tail];
static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
- //unsigned long flags;
volatile tx_dma_t *ptxd;
u32 buff_stat;
db_dest_t *pDB;
int i;
if (au1000_debug > 4)
- printk("%s: tx: aup %x len=%d, data=%p, head %d\n",
- dev->name, (unsigned)aup, skb->len, skb->data, aup->tx_head);
+ printk("%s: tx: aup %x len=%d, data=%p, head %d\n",
+ dev->name, (unsigned)aup, skb->len,
+ skb->data, aup->tx_head);
- /* Prevent interrupts from changing the Tx ring */
- //spin_lock_irqsave(&aup->lock, flags);
-
ptxd = aup->tx_dma_ring[aup->tx_head];
buff_stat = ptxd->buff_stat;
if (buff_stat & TX_DMA_ENABLE) {
/* We've wrapped around and the transmitter is still busy */
netif_stop_queue(dev);
aup->tx_full = 1;
- //spin_unlock_irqrestore(&aup->lock, flags);
return 1;
}
else if (buff_stat & TX_T_DONE) {
ptxd->len = skb->len;
ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE;
- sync();
+ au_sync();
dev_kfree_skb(skb);
aup->tx_head = (aup->tx_head + 1) & (NUM_TX_DMA - 1);
dev->trans_start = jiffies;
- //spin_unlock_irqrestore(&aup->lock, flags);
return 0;
}
skb_reserve(skb, 2); /* 16 byte IP header align */
eth_copy_and_sum(skb, (unsigned char *)pDB->vaddr,
status & RX_FRAME_LEN_MASK, 0);
- skb_put(skb, status & RX_FRAME_LEN_MASK); /* Make room */
+ skb_put(skb, status & RX_FRAME_LEN_MASK);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb); /* pass the packet to upper layers */
}
}
prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
aup->rx_head = (aup->rx_head + 1) & (NUM_RX_DMA - 1);
- sync();
+ au_sync();
/* next descriptor */
prxd = aup->rx_dma_ring[aup->rx_head];
printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
return;
}
- au1000_rx(dev);
au1000_tx_ack(dev);
+ au1000_rx(dev);
}
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
- /* fixme */
if (au1000_debug > 4)
- printk("%s: set_multicast: flags=%x\n", dev->name, dev->flags);
+ printk("%s: set_rx_mode: flags=%x\n", dev->name, dev->flags);
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
aup->mac->control |= MAC_PROMISCUOUS;
}
aup->mac->multi_hash_high = mc_filter[1];
aup->mac->multi_hash_low = mc_filter[0];
+ aup->mac->control &= ~MAC_PROMISCUOUS;
aup->mac->control |= MAC_HASH_MODE;
}
}
static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- //struct au1000_private *aup = (struct au1000_private *) dev->priv;
u16 *data = (u16 *)&rq->ifr_data;
/* fixme */
switch(cmd) {
- case SIOCGMIIPHY: /* Get the address of the PHY in use. */
+ case SIOCGMIIPHY: /* Get the address of the PHY in use. */
data[0] = PHY_ADDRESS;
- case SIOCGMIIREG: /* Read the specified MII register. */
+ case SIOCGMIIREG: /* Read the specified MII register. */
//data[3] = mdio_read(ioaddr, data[0], data[1]);
return 0;
- case SIOCSMIIREG: /* Write the specified MII register */
+ case SIOCSMIIREG: /* Write the specified MII register */
if (!capable(CAP_NET_ADMIN))
return -EPERM;
//mdio_write(ioaddr, data[0], data[1], data[2]);
return 0;
- default:
+ default:
return -EOPNOTSUPP;
}
}
switch(map->port){
case IF_PORT_UNKNOWN: /* use auto here */
- printk("auto\\n");
+ printk(KERN_INFO "%s: config phy for aneg\n",
+ dev->name);
dev->if_port = map->port;
/* Link Down: the timer will bring it up */
netif_carrier_off(dev);
control &= ~(MII_CNTL_FDX | MII_CNTL_F100);
/* enable auto negotiation and reset the negotiation */
- mdio_write(dev, aup->phy_addr,
- MII_CONTROL, control | MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
+ mdio_write(dev, aup->phy_addr, MII_CONTROL,
+ control | MII_CNTL_AUTO |
+ MII_CNTL_RST_AUTO);
break;
case IF_PORT_10BASET: /* 10BaseT */
- printk("10baseT\n");
+ printk(KERN_INFO "%s: config phy for 10BaseT\n",
+ dev->name);
dev->if_port = map->port;
/* Link Down: the timer will bring it up */
/* set Speed to 10Mbps, Half Duplex */
control = mdio_read(dev, aup->phy_addr, MII_CONTROL);
- printk("read control %x\n", control);
- control &= ~(MII_CNTL_F100 | MII_CNTL_AUTO | MII_CNTL_FDX);
+ control &= ~(MII_CNTL_F100 | MII_CNTL_AUTO |
+ MII_CNTL_FDX);
/* disable auto negotiation and force 10M/HD mode*/
mdio_write(dev, aup->phy_addr, MII_CONTROL, control);
case IF_PORT_100BASET: /* 100BaseT */
case IF_PORT_100BASETX: /* 100BaseTx */
- printk("100 base T/TX\n");
+ printk(KERN_INFO "%s: config phy for 100BaseTX\n",
+ dev->name);
dev->if_port = map->port;
/* Link Down: the timer will bring it up */
break;
case IF_PORT_100BASEFX: /* 100BaseFx */
- printk("100 Base FX\n");
+ printk(KERN_INFO "%s: config phy for 100BaseFX\n",
+ dev->name);
dev->if_port = map->port;
/* Link Down: the timer will bring it up */
case IF_PORT_10BASE2: /* 10Base2 */
case IF_PORT_AUI: /* AUI */
/* These Modes are not supported (are they?)*/
- printk(KERN_INFO "Not supported");
+ printk(KERN_ERR "%s: 10Base2/AUI not supported",
+ dev->name);
return -EOPNOTSUPP;
break;
default:
- printk("Invalid");
+ printk(KERN_ERR "%s: Invalid media selected",
+ dev->name);
return -EINVAL;
}
return 0;
}
return 0;
}
+
+module_init(au1000_init_module);
+module_exit(au1000_cleanup_module);
projects / linux / commitdiff