[PATCH] fix all the paths in ide Kconfig docs

(Helge Hafting)

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 62e6b6b5dcc67dbbf554d1c53ed3ccf458fd7b36..fe78e5d2f196e68c703a7dca3f39295f6b1fed60 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -521,7 +521,7 @@ config BLK_DEV_ALI15X3
 
          If you say Y here, you also need to say Y to "Use DMA by default
          when available", above.  Please read the comments at the top of
-         <file:drivers/ide/alim15x3.c>.
+         <file:drivers/ide/pci/alim15x3.c>.
 
          If unsure, say N.
 
@@ -608,7 +608,7 @@ config HPT34X_AUTODMA
        depends on BLK_DEV_HPT34X && IDEDMA_PCI_WIP
        help
          This is a dangerous thing to attempt currently! Please read the
-         comments at the top of <file:drivers/ide/hpt34x.c>.  If you say Y
+         comments at the top of <file:drivers/ide/pci/hpt34x.c>.  If you say Y
          here, then say Y to "Use DMA by default when available" as well.
 
          If unsure, say N.
@@ -670,14 +670,14 @@ config BLK_DEV_NS87415
          This driver adds detection and support for the NS87415 chip
          (used in SPARC64, among others).
 
-         Please read the comments at the top of <file:drivers/ide/ns87415.c>.
+         Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
 
 config BLK_DEV_OPTI621
        tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
        depends on PCI && BLK_DEV_IDEPCI && EXPERIMENTAL
        help
          This is a driver for the OPTi 82C621 EIDE controller.
-         Please read the comments at the top of <file:drivers/ide/opti621.c>.
+         Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
 
 config BLK_DEV_PDC202XX_OLD
        tristate "PROMISE PDC202{46|62|65|67} support"
@@ -696,7 +696,7 @@ config PDC202XX_BURST
          when the PDC20265 BIOS has been disabled (for faster boot up).
 
          Please read the comments at the top of
-         <file:drivers/ide/pdc202xx.c>.
+         <file:drivers/ide/pci/pdc202xx_old.c>.
 
          If unsure, say N.
 
@@ -754,7 +754,7 @@ config BLK_DEV_SIS5513
          If you say Y here, you need to say Y to "Use DMA by default when
          available" as well.
 
-         Please read the comments at the top of <file:drivers/ide/sis5513.c>.
+         Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
 
 config BLK_DEV_SLC90E66
        tristate "SLC90E66 chipset support"
@@ -770,7 +770,7 @@ config BLK_DEV_SLC90E66
          available" as well.
 
          Please read the comments at the top of
-         drivers/ide/slc90e66.c.
+         drivers/ide/pci/slc90e66.c.
 
 config BLK_DEV_TRM290
        tristate "Tekram TRM290 chipset support"
@@ -779,7 +779,7 @@ config BLK_DEV_TRM290
          This driver adds support for bus master DMA transfers
          using the Tekram TRM290 PCI IDE chip. Volunteers are
          needed for further tweaking and development.
-         Please read the comments at the top of <file:drivers/ide/trm290.c>.
+         Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
 
 config BLK_DEV_VIA82CXXX
        tristate "VIA82CXXX chipset support"
@@ -1010,7 +1010,7 @@ config BLK_DEV_ALI14XX
          boot parameter.  It enables support for the secondary IDE interface
          of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
          I/O speeds to be set as well.  See the files
-         <file:Documentation/ide.txt> and <file:drivers/ide/ali14xx.c> for
+         <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> for
          more info.
 
 config BLK_DEV_DTC2278
@@ -1021,7 +1021,7 @@ config BLK_DEV_DTC2278
          boot parameter. It enables support for the secondary IDE interface
          of the DTC-2278 card, and permits faster I/O speeds to be set as
          well. See the <file:Documentation/ide.txt> and
-         <file:drivers/ide/dtc2278.c> files for more info.
+         <file:drivers/ide/legacy/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
        tristate "Holtek HT6560B support"
@@ -1031,7 +1031,7 @@ config BLK_DEV_HT6560B
          boot parameter. It enables support for the secondary IDE interface
          of the Holtek card, and permits faster I/O speeds to be set as well.
          See the <file:Documentation/ide.txt> and
-         <file:drivers/ide/ht6560b.c> files for more info.
+         <file:drivers/ide/legacy/ht6560b.c> files for more info.
 
 config BLK_DEV_PDC4030
        tristate "PROMISE DC4030 support (EXPERIMENTAL)"
@@ -1044,7 +1044,7 @@ config BLK_DEV_PDC4030
          supported (and probably never will be since I don't think the cards
          support them). This driver is enabled at runtime using the "ide0=dc4030"
          or "ide1=dc4030" kernel boot parameter. See the
-         <file:drivers/ide/pdc4030.c> file for more info.
+         <file:drivers/ide/legacy/pdc4030.c> file for more info.
 
 config BLK_DEV_QD65XX
        tristate "QDI QD65xx support"
@@ -1052,7 +1052,7 @@ config BLK_DEV_QD65XX
        help
          This driver is enabled at runtime using the "ide0=qd65xx" kernel
          boot parameter.  It permits faster I/O speeds to be set.  See the
-         <file:Documentation/ide.txt> and <file:drivers/ide/qd65xx.c> for
+         <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
          more info.
 
 config BLK_DEV_UMC8672
@@ -1063,7 +1063,7 @@ config BLK_DEV_UMC8672
          boot parameter. It enables support for the secondary IDE interface
          of the UMC-8672, and permits faster I/O speeds to be set as well.
          See the files <file:Documentation/ide.txt> and
-         <file:drivers/ide/umc8672.c> for more info.
+         <file:drivers/ide/legacy/umc8672.c> for more info.
 
 config BLK_DEV_HD_ONLY
        bool "Old hard disk (MFM/RLL/IDE) driver"
@@ -1132,7 +1132,7 @@ config BLK_DEV_PDC202XX
          available" as well.
 
          Please read the comments at the top of
-         <file:drivers/ide/pdc202xx.c>.
+         <file:drivers/ide/pdc202xx_old.c>.
 
          If unsure, say N.