Let's lighten the global spinlock mmlist_lock.
What's it for?
1. Its original role is to guard mmlist.
2. It later got a second role, to prevent get_task_mm from raising
mm_users from the dead, just after it went down to 0.
Firstly consider the second: __exit_mm sets tsk->mm NULL while holding
task_lock before calling mmput; so mmlist_lock only guards against the
exceptional case, of get_task_mm on a kernel workthread which did AIO's
use_mm (which transiently sets its tsk->mm without raising mm_users) on an
mm now exiting.
Well, I don't think get_task_mm should succeed at all on use_mm tasks.
It's mainly used by /proc/pid and ptrace, seems at best confusing for those
to present the kernel thread as having a user mm, which it won't have a
moment later. Define PF_BORROWED_MM, set in use_mm, clear in unuse_mm
(though we could just leave it), get_task_mm give NULL if set.
Secondly consider the first: and what's mmlist for?
1. Its original role was for swap_out to scan: rmap ended that in 2.5.27.
2. In 2.4.10 it got a second role, for try_to_unuse to scan for swapoff.
So, make mmlist a list of mms which maybe have pages on swap: add mm to
mmlist when first swap entry is assigned in try_to_unmap_one (pageout), or
in copy_page_range (fork); and mmput remove it from mmlist as before,
except usually list_empty and there's no need to lock. drain_mmlist added
to swapoff, to empty out the mmlist if no swap is then in use.
mmput leave mm on mmlist until after its exit_mmap, so try_to_unmap_one can
still add mm to mmlist without worrying about the mm_users 0 case; but
try_to_unuse must avoid the mm_users 0 case (when an mm might be removed
from mmlist, and freed, while it's down in unuse_process): use
atomic_inc_return now all architectures support that.
Some of the detailed comments in try_to_unuse have grown out of date:
updated and trimmed some, but leave SWAP_MAP_MAX for another occasion.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* against pageattr.c; it is the unique case in which a valid change
* of kernel pagetables can't be lazily synchronized by vmalloc faults.
* vmalloc faults work because attached pagetables are never freed.
- * If the locking proves to be non-performant, a ticketing scheme with
- * checks at dup_mmap(), exec(), and other mmlist addition points
- * could be used. The locking scheme was chosen on the basis of
- * manfred's recommendations and having no core impact whatsoever.
+ * The locking scheme was chosen on the basis of manfred's
+ * recommendations and having no core impact whatsoever.
* -- wli
*/
spinlock_t pgd_lock = SPIN_LOCK_UNLOCKED;
struct task_struct *tsk = current;
task_lock(tsk);
+ tsk->flags |= PF_BORROWED_MM;
active_mm = tsk->active_mm;
atomic_inc(&mm->mm_count);
tsk->mm = mm;
struct task_struct *tsk = current;
task_lock(tsk);
+ tsk->flags &= ~PF_BORROWED_MM;
tsk->mm = NULL;
/* active_mm is still 'mm' */
enter_lazy_tlb(mm, tsk);
struct task_struct *tsk;
struct mm_struct * old_mm, *active_mm;
- /* Add it to the list of mm's */
- spin_lock(&mmlist_lock);
- list_add(&mm->mmlist, &init_mm.mmlist);
- mmlist_nr++;
- spin_unlock(&mmlist_lock);
-
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
struct rw_semaphore mmap_sem;
spinlock_t page_table_lock; /* Protects task page tables and mm->rss */
- struct list_head mmlist; /* List of all active mm's. These are globally strung
+ struct list_head mmlist; /* List of maybe swapped mm's. These are globally strung
* together off init_mm.mmlist, and are protected
* by mmlist_lock
*/
struct kioctx default_kioctx;
};
-extern int mmlist_nr;
-
struct sighand_struct {
atomic_t count;
struct k_sigaction action[_NSIG];
#define PF_SWAPOFF 0x00080000 /* I am in swapoff */
#define PF_LESS_THROTTLE 0x00100000 /* Throttle me less: I clean memory */
#define PF_SYNCWRITE 0x00200000 /* I am doing a sync write */
+#define PF_BORROWED_MM 0x00400000 /* I am a kthread doing use_mm */
#ifdef CONFIG_SMP
extern int set_cpus_allowed(task_t *p, cpumask_t new_mask);
rb_parent = NULL;
pprev = &mm->mmap;
- /*
- * Add it to the mmlist after the parent.
- * Doing it this way means that we can order the list,
- * and fork() won't mess up the ordering significantly.
- * Add it first so that swapoff can see any swap entries.
- */
- spin_lock(&mmlist_lock);
- list_add(&mm->mmlist, ¤t->mm->mmlist);
- mmlist_nr++;
- spin_unlock(&mmlist_lock);
-
for (mpnt = current->mm->mmap ; mpnt ; mpnt = mpnt->vm_next) {
struct file *file;
#endif /* CONFIG_MMU */
spinlock_t mmlist_lock __cacheline_aligned_in_smp = SPIN_LOCK_UNLOCKED;
-int mmlist_nr;
#define allocate_mm() (kmem_cache_alloc(mm_cachep, SLAB_KERNEL))
#define free_mm(mm) (kmem_cache_free(mm_cachep, (mm)))
atomic_set(&mm->mm_users, 1);
atomic_set(&mm->mm_count, 1);
init_rwsem(&mm->mmap_sem);
+ INIT_LIST_HEAD(&mm->mmlist);
mm->core_waiters = 0;
mm->nr_ptes = 0;
mm->page_table_lock = SPIN_LOCK_UNLOCKED;
*/
void mmput(struct mm_struct *mm)
{
- if (atomic_dec_and_lock(&mm->mm_users, &mmlist_lock)) {
- list_del(&mm->mmlist);
- mmlist_nr--;
- spin_unlock(&mmlist_lock);
+ if (atomic_dec_and_test(&mm->mm_users)) {
exit_aio(mm);
exit_mmap(mm);
+ if (!list_empty(&mm->mmlist)) {
+ spin_lock(&mmlist_lock);
+ list_del(&mm->mmlist);
+ spin_unlock(&mmlist_lock);
+ }
put_swap_token(mm);
mmdrop(mm);
}
/**
* get_task_mm - acquire a reference to the task's mm
*
- * Returns %NULL if the task has no mm. Checks if the use count
- * of the mm is non-zero and if so returns a reference to it, after
+ * Returns %NULL if the task has no mm. Checks PF_BORROWED_MM (meaning
+ * this kernel workthread has transiently adopted a user mm with use_mm,
+ * to do its AIO) is not set and if so returns a reference to it, after
* bumping up the use count. User must release the mm via mmput()
* after use. Typically used by /proc and ptrace.
- *
- * If the use count is zero, it means that this mm is going away,
- * so return %NULL. This only happens in the case of an AIO daemon
- * which has temporarily adopted an mm (see use_mm), in the course
- * of its final mmput, before exit_aio has completed.
*/
struct mm_struct *get_task_mm(struct task_struct *task)
{
task_lock(task);
mm = task->mm;
if (mm) {
- spin_lock(&mmlist_lock);
- if (!atomic_read(&mm->mm_users))
+ if (task->flags & PF_BORROWED_MM)
mm = NULL;
else
atomic_inc(&mm->mm_users);
- spin_unlock(&mmlist_lock);
}
task_unlock(task);
return mm;
goto cont_copy_pte_range_noset;
/* pte contains position in swap, so copy. */
if (!pte_present(pte)) {
- if (!pte_file(pte))
+ if (!pte_file(pte)) {
swap_duplicate(pte_to_swp_entry(pte));
+ if (list_empty(&dst->mmlist)) {
+ spin_lock(&mmlist_lock);
+ list_add(&dst->mmlist,
+ &src->mmlist);
+ spin_unlock(&mmlist_lock);
+ }
+ }
set_pte(dst_pte, pte);
goto cont_copy_pte_range_noset;
}
* mm->page_table_lock
* zone->lru_lock (in mark_page_accessed)
* swap_list_lock (in swap_free etc's swap_info_get)
+ * mmlist_lock (in mmput, drain_mmlist and others)
* swap_device_lock (in swap_duplicate, swap_info_get)
* mapping->private_lock (in __set_page_dirty_buffers)
* inode_lock (in set_page_dirty's __mark_inode_dirty)
*/
BUG_ON(!PageSwapCache(page));
swap_duplicate(entry);
+ if (list_empty(&mm->mmlist)) {
+ spin_lock(&mmlist_lock);
+ list_add(&mm->mmlist, &init_mm.mmlist);
+ spin_unlock(&mmlist_lock);
+ }
set_pte(pte, swp_entry_to_pte(entry));
BUG_ON(pte_file(*pte));
}
*
* A simpler strategy would be to start at the last mm we
* freed the previous entry from; but that would take less
- * advantage of mmlist ordering (now preserved by swap_out()),
- * which clusters forked address spaces together, most recent
- * child immediately after parent. If we race with dup_mmap(),
- * we very much want to resolve parent before child, otherwise
- * we may miss some entries: using last mm would invert that.
+ * advantage of mmlist ordering, which clusters forked mms
+ * together, child after parent. If we race with dup_mmap(), we
+ * prefer to resolve parent before child, lest we miss entries
+ * duplicated after we scanned child: using last mm would invert
+ * that. Though it's only a serious concern when an overflowed
+ * swap count is reset from SWAP_MAP_MAX, preventing a rescan.
*/
start_mm = &init_mm;
atomic_inc(&init_mm.mm_users);
/*
* Keep on scanning until all entries have gone. Usually,
* one pass through swap_map is enough, but not necessarily:
- * mmput() removes mm from mmlist before exit_mmap() and its
- * zap_page_range(). That's not too bad, those entries are
- * on their way out, and handled faster there than here.
- * do_munmap() behaves similarly, taking the range out of mm's
- * vma list before zap_page_range(). But unfortunately, when
- * unmapping a part of a vma, it takes the whole out first,
- * then reinserts what's left after (might even reschedule if
- * open() method called) - so swap entries may be invisible
- * to swapoff for a while, then reappear - but that is rare.
+ * there are races when an instance of an entry might be missed.
*/
while ((i = find_next_to_unuse(si, i)) != 0) {
if (signal_pending(current)) {
wait_on_page_writeback(page);
/*
- * Remove all references to entry, without blocking.
+ * Remove all references to entry.
* Whenever we reach init_mm, there's no address space
* to search, but use it as a reminder to search shmem.
*/
while (*swap_map > 1 && !retval &&
(p = p->next) != &start_mm->mmlist) {
mm = list_entry(p, struct mm_struct, mmlist);
- atomic_inc(&mm->mm_users);
+ if (atomic_inc_return(&mm->mm_users) == 1) {
+ atomic_dec(&mm->mm_users);
+ continue;
+ }
spin_unlock(&mmlist_lock);
mmput(prev_mm);
prev_mm = mm;
return retval;
}
+/*
+ * After a successful try_to_unuse, if no swap is now in use, we know we
+ * can empty the mmlist. swap_list_lock must be held on entry and exit.
+ * Note that mmlist_lock nests inside swap_list_lock, and an mm must be
+ * added to the mmlist just after page_duplicate - before would be racy.
+ */
+static void drain_mmlist(void)
+{
+ struct list_head *p, *next;
+ unsigned int i;
+
+ for (i = 0; i < nr_swapfiles; i++)
+ if (swap_info[i].inuse_pages)
+ return;
+ spin_lock(&mmlist_lock);
+ list_for_each_safe(p, next, &init_mm.mmlist)
+ list_del_init(p);
+ spin_unlock(&mmlist_lock);
+}
+
/*
* Use this swapdev's extent info to locate the (PAGE_SIZE) block which
* corresponds to page offset `offset'.
}
down(&swapon_sem);
swap_list_lock();
+ drain_mmlist();
swap_device_lock(p);
swap_file = p->swap_file;
p->swap_file = NULL;
projects / linux / commitdiff