]> git.hungrycats.org Git - linux/commitdiff
driver core: take parent lock in async device attach
authorMario Peter <mario.peter@leica-geosystems.com>
Tue, 3 Nov 2026 13:43:18 +0000 (08:43 -0500)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 6 Nov 2026 17:06:13 +0000 (12:06 -0500)
[ Upstream commit 187a62f99da29b1a55602b0d401a783d8dc86161 ]

For device types with need_parent_lock set (only USB interfaces),
probe() must run with the parent device locked. A synchronous attach
after device_add() gets this from the caller, e.g.
usb_set_configuration() holds the udev lock while adding interfaces.
__device_attach_async_helper() runs the probe from an async worker
instead, where that lock isn't held, and only takes device_lock(dev).

With async probing enabled for the hub driver (e.g. driver_async_probe=*
or driver_async_probe=hub), this races when a multi-TT hub is
configured. For multi-TT hubs, hub_probe() calls
usb_set_interface(hdev, 0, 1) to select the TT-per-port altsetting, and
usb_set_interface() creates the endpoint devices of the interface a
second time:

  usb_set_configuration()           async worker
    [udev locked]
    device_add(intf)
      queues the probe  ----------> __device_attach_async_helper()
                                      [intf locked, udev not locked]
                                      hub_probe()
                                        usb_set_interface(hdev, 0, 1)
    create_intf_ep_devs(intf)             create_intf_ep_devs(intf)

create_intf_ep_devs() checks and sets intf->ep_devs_created without a
lock of its own. If usb_set_configuration() has created ep_81 but not
yet set the flag, usb_set_interface() skips removing the endpoint
devices of the old altsetting and creates ep_81 again. With a
synchronous probe, hub_probe() runs inside device_add() with the udev
lock held, and usb_set_configuration() then finds ep_devs_created
already set.

Single-TT hubs don't call usb_set_interface() from hub_probe() and
don't show this warning, but their probe runs without the udev lock as
well.

On an i.MX8MM board with an onboard USB2514 hub this hit 11 of 100
boots:

  sysfs: cannot create duplicate filename '.../1-1/1-1:1.0/ep_81'
  Call trace:
   sysfs_warn_dup
   usb_create_ep_devs
   create_intf_ep_devs
   usb_set_interface
   hub_probe
   usb_probe_interface
   really_probe
   __device_attach_async_helper
   async_run_entry_fn

It also shows on v7.3-rc6 in QEMU, with dummy_hcd and a raw-gadget
program emulating a multi-TT hub: re-authorizing the hub in a loop,
while a SCHED_FIFO task preempts the writing task at random points for
3 ms, hit the warning in 29 of 6000 iterations.

Take the parent lock in __device_attach_async_helper() as well, like
__driver_attach_async_helper() does, and move
__device_driver_lock/unlock() up for that. With this the warning was
gone in 300 boots on the board and in 6000 iterations in QEMU.

Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Signed-off-by: Mario Peter <mario.peter@leica-geosystems.com>
Cc: stable@vger.kernel.org # 4.2
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ johan: switch to async_schedule_dev_nocall() to avoid deadlock if
         async_schedule_dev() runs synchronously when parent lock is
 held ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20261014133109.1392265-4-johan@kernel.org
[ Fold the nested conditions into a single if statement; correct commit
  message to mention "device types" rather than "buses" for
  "need_parent_lock". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/base/dd.c

index 707d65396f2e03bca1f36b948508cc495bb3ed53..2a94aad0f71e47b0940c1ccda4f221054c6cc6e4 100644 (file)
@@ -1042,6 +1042,38 @@ static int __device_attach_driver(struct device_driver *drv, void *_data)
        return ret == 0;
 }
 
+/*
+ * __device_driver_lock - acquire locks needed to manipulate dev->drv
+ * @dev: Device we will update driver info for
+ * @parent: Parent device. Needed if the device type requires parent lock
+ *
+ * This function will take the required locks for manipulating dev->drv.
+ * Normally this will just be the @dev lock, but when called for a USB
+ * interface, @parent lock will be held as well.
+ */
+static void __device_driver_lock(struct device *dev, struct device *parent)
+{
+       if (dev->type && dev->type->need_parent_lock && parent)
+               device_lock(parent);
+       device_lock(dev);
+}
+
+/*
+ * __device_driver_unlock - release locks needed to manipulate dev->drv
+ * @dev: Device we will update driver info for
+ * @parent: Parent device. Needed if the device type requires parent lock
+ *
+ * This function will release the required locks for manipulating dev->drv.
+ * Normally this will just be the @dev lock, but when called for a
+ * USB interface, @parent lock will be released as well.
+ */
+static void __device_driver_unlock(struct device *dev, struct device *parent)
+{
+       device_unlock(dev);
+       if (dev->type && dev->type->need_parent_lock && parent)
+               device_unlock(parent);
+}
+
 static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
 {
        struct device *dev = _dev;
@@ -1051,7 +1083,7 @@ static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
                .want_async     = true,
        };
 
-       device_lock(dev);
+       __device_driver_lock(dev, dev->parent);
 
        /*
         * Check if device has already been removed or claimed. This may
@@ -1073,7 +1105,7 @@ static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
        if (dev->parent)
                pm_runtime_put(dev->parent);
 out_unlock:
-       device_unlock(dev);
+       __device_driver_unlock(dev, dev->parent);
 
        put_device(dev);
 }
@@ -1130,8 +1162,11 @@ static int __device_attach(struct device *dev, bool allow_async)
        }
 out_unlock:
        device_unlock(dev);
-       if (async)
-               async_schedule_dev(__device_attach_async_helper, dev);
+       if (async && !async_schedule_dev_nocall(__device_attach_async_helper, dev)) {
+               put_device(dev);
+               ret = 2;        /* retry synchronously */
+       }
+
        return ret;
 }
 
@@ -1158,48 +1193,20 @@ EXPORT_SYMBOL_GPL(device_attach);
 void device_initial_probe(struct device *dev)
 {
        struct subsys_private *sp = bus_to_subsys(dev->bus);
+       int ret;
 
        if (!sp)
                return;
 
-       if (sp->drivers_autoprobe)
-               __device_attach(dev, true);
+       if (sp->drivers_autoprobe) {
+               ret = __device_attach(dev, true);
+               if (ret == 2)
+                       __device_attach(dev, false);
+       }
 
        subsys_put(sp);
 }
 
-/*
- * __device_driver_lock - acquire locks needed to manipulate dev->drv
- * @dev: Device we will update driver info for
- * @parent: Parent device. Needed if the device type requires parent lock
- *
- * This function will take the required locks for manipulating dev->drv.
- * Normally this will just be the @dev lock, but when called for a USB
- * interface, @parent lock will be held as well.
- */
-static void __device_driver_lock(struct device *dev, struct device *parent)
-{
-       if (dev->type && dev->type->need_parent_lock && parent)
-               device_lock(parent);
-       device_lock(dev);
-}
-
-/*
- * __device_driver_unlock - release locks needed to manipulate dev->drv
- * @dev: Device we will update driver info for
- * @parent: Parent device. Needed if the device type requires parent lock
- *
- * This function will release the required locks for manipulating dev->drv.
- * Normally this will just be the @dev lock, but when called for a
- * USB interface, @parent lock will be released as well.
- */
-static void __device_driver_unlock(struct device *dev, struct device *parent)
-{
-       device_unlock(dev);
-       if (dev->type && dev->type->need_parent_lock && parent)
-               device_unlock(parent);
-}
-
 /**
  * device_driver_attach - attach a specific driver to a specific device
  * @drv: Driver to attach