+++ /dev/null
-This file contains some additional information for the Philips and OEM webcams.
-E-mail: webcam@smcc.demon.nl Last updated: 2004-01-19
-Site: http://www.smcc.demon.nl/webcam/
-
-As of this moment, the following cameras are supported:
- * Philips PCA645
- * Philips PCA646
- * Philips PCVC675
- * Philips PCVC680
- * Philips PCVC690
- * Philips PCVC720/40
- * Philips PCVC730
- * Philips PCVC740
- * Philips PCVC750
- * Askey VC010
- * Creative Labs Webcam 5
- * Creative Labs Webcam Pro Ex
- * Logitech QuickCam 3000 Pro
- * Logitech QuickCam 4000 Pro
- * Logitech QuickCam Notebook Pro
- * Logitech QuickCam Zoom
- * Logitech QuickCam Orbit
- * Logitech QuickCam Sphere
- * Samsung MPC-C10
- * Samsung MPC-C30
- * Sotec Afina Eye
- * AME CU-001
- * Visionite VCS-UM100
- * Visionite VCS-UC300
-
-The main webpage for the Philips driver is at the address above. It contains
-a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
-contains decompression routines that allow you to use higher image sizes and
-framerates; in addition the webcam uses less bandwidth on the USB bus (handy
-if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefor not be distributed as source; however, its use
-is completely optional.
-
-You can build this code either into your kernel, or as a module. I recommend
-the latter, since it makes troubleshooting a lot easier. The built-in
-microphone is supported through the USB Audio class.
-
-When you load the module you can set some default settings for the
-camera; some programs depend on a particular image-size or -format and
-don't know how to set it properly in the driver. The options are:
-
-size
- Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or
- 'vga', for an image size of resp. 128x96, 160x120, 176x144,
- 320x240, 352x288 and 640x480 (of course, only for those cameras that
- support these resolutions).
-
-fps
- Specifies the desired framerate. Is an integer in the range of 4-30.
-
-fbufs
- This paramter specifies the number of internal buffers to use for storing
- frames from the cam. This will help if the process that reads images from
- the cam is a bit slow or momentarely busy. However, on slow machines it
- only introduces lag, so choose carefully. The default is 3, which is
- reasonable. You can set it between 2 and 5.
-
-mbufs
- This is an integer between 1 and 10. It will tell the module the number of
- buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends.
- The default is 2, which is adequate for most applications (double
- buffering).
-
- Should you experience a lot of 'Dumping frame...' messages during
- grabbing with a tool that uses mmap(), you might want to increase if.
- However, it doesn't really buffer images, it just gives you a bit more
- slack when your program is behind. But you need a multi-threaded or
- forked program to really take advantage of these buffers.
-
- The absolute maximum is 10, but don't set it too high! Every buffer takes
- up 460 KB of RAM, so unless you have a lot of memory setting this to
- something more than 4 is an absolute waste. This memory is only
- allocated during open(), so nothing is wasted when the camera is not in
- use.
-
-power_save
- When power_save is enabled (set to 1), the module will try to shut down
- the cam on close() and re-activate on open(). This will save power and
- turn off the LED. Not all cameras support this though (the 645 and 646
- don't have power saving at all), and some models don't work either (they
- will shut down, but never wake up). Consider this experimental. By
- default this option is disabled.
-
-compression (only useful with the plugin)
- With this option you can control the compression factor that the camera
- uses to squeeze the image through the USB bus. You can set the
- parameter between 0 and 3:
- 0 = prefer uncompressed images; if the requested mode is not available
- in an uncompressed format, the driver will silently switch to low
- compression.
- 1 = low compression.
- 2 = medium compression.
- 3 = high compression.
-
- High compression takes less bandwidth of course, but it could also
- introduce some unwanted artefacts. The default is 2, medium compression.
- See the FAQ on the website for an overview of which modes require
- compression.
-
- The compression parameter does not apply to the 645 and 646 cameras
- and OEM models derived from those (only a few). Most cams honour this
- parameter.
-
-leds
- This settings takes 2 integers, that define the on/off time for the LED
- (in milliseconds). One of the interesting things that you can do with
- this is let the LED blink while the camera is in use. This:
-
- leds=500,500
-
- will blink the LED once every second. But with:
-
- leds=0,0
-
- the LED never goes on, making it suitable for silent surveillance.
-
- By default the camera's LED is on solid while in use, and turned off
- when the camera is not used anymore.
-
- This parameter works only with the ToUCam range of cameras (720, 730, 740,
- 750) and OEMs. For other cameras this command is silently ignored, and
- the LED cannot be controlled.
-
- Finally: this parameters does not take effect UNTIL the first time you
- open the camera device. Until then, the LED remains on.
-
-dev_hint
- A long standing problem with USB devices is their dynamic nature: you
- never know what device a camera gets assigned; it depends on module load
- order, the hub configuration, the order in which devices are plugged in,
- and the phase of the moon (i.e. it can be random). With this option you
- can give the driver a hint as to what video device node (/dev/videoX) it
- should use with a specific camera. This is also handy if you have two
- cameras of the same model.
-
- A camera is specified by its type (the number from the camera model,
- like PCA645, PCVC750VC, etc) and optionally the serial number (visible
- in /proc/bus/usb/devices). A hint consists of a string with the following
- format:
-
- [type[.serialnumber]:]node
-
- The square brackets mean that both the type and the serialnumber are
- optional, but a serialnumber cannot be specified without a type (which
- would be rather pointless). The serialnumber is separated from the type
- by a '.'; the node number by a ':'.
-
- This somewhat cryptic syntax is best explained by a few examples:
-
- dev_hint=3,5 The first detected cam gets assigned
- /dev/video3, the second /dev/video5. Any
- other cameras will get the first free
- available slot (see below).
-
- dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1,
- and a PCVC680 /dev/video2.
-
- dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber
- 0123 goes to /dev/video3, the same
- camera model with the 4567 serial
- gets /dev/video0.
-
- dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the
- next 3 Philips cams will use /dev/video4
- through /dev/video6.
-
- Some points worth knowing:
- - Serialnumbers are case sensitive and must be written full, including
- leading zeroes (it's treated as a string).
- - If a device node is already occupied, registration will fail and
- the webcam is not available.
- - You can have up to 64 video devices; be sure to make enough device
- nodes in /dev if you want to spread the numbers (this does not apply
- to devfs). After /dev/video9 comes /dev/video10 (not /dev/videoA).
- - If a camera does not match any dev_hint, it will simply get assigned
- the first available device node, just as it used to be.
-
-trace
- In order to better detect problems, it is now possible to turn on a
- 'trace' of some of the calls the module makes; it logs all items in your
- kernel log at debug level.
-
- The trace variable is a bitmask; each bit represents a certain feature.
- If you want to trace something, look up the bit value(s) in the table
- below, add the values together and supply that to the trace variable.
-
- Value Value Description Default
- (dec) (hex)
- 1 0x1 Module initialization; this will log messages On
- while loading and unloading the module
-
- 2 0x2 probe() and disconnect() traces On
-
- 4 0x4 Trace open() and close() calls Off
-
- 8 0x8 read(), mmap() and associated ioctl() calls Off
-
- 16 0x10 Memory allocation of buffers, etc. Off
-
- 32 0x20 Showing underflow, overflow and Dumping frame On
- messages
-
- 64 0x40 Show viewport and image sizes Off
-
- 128 0x80 PWCX debugging Off
-
- For example, to trace the open() & read() fuctions, sum 8 + 4 = 12,
- so you would supply trace=12 during insmod or modprobe. If
- you want to turn the initialization and probing tracing off, set trace=0.
- The default value for trace is 35 (0x23).
-
-
-
-Example:
-
- # modprobe pwc size=cif fps=15 power_save=1
-
-The fbufs, mbufs and trace parameters are global and apply to all connected
-cameras. Each camera has its own set of buffers.
-
-size and fps only specify defaults when you open() the device; this is to
-accommodate some tools that don't set the size. You can change these
-settings after open() with the Video4Linux ioctl() calls. The default of
-defaults is QCIF size at 10 fps.
-
-The compression parameter is semiglobal; it sets the initial compression
-preference for all camera's, but this parameter can be set per camera with
-the VIDIOCPWCSCQUAL ioctl() call.
-
-All parameters are optional.
-
To compile this driver as a module, choose M here: the
module will be called ov511.
-config USB_PWC
- tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y or M here if you want to use one of these Philips & OEM
- webcams:
- * Philips PCA645, PCA646
- * Philips PCVC675, PCVC680, PCVC690
- * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
- * Askey VC010
- * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
- and 'Orbit'/'Sphere'
- * Samsung MPC-C10, MPC-C30
- * Creative Webcam 5, Pro Ex
- * SOTEC Afina Eye
- * Visionite VCS-UC300, VCS-UM100
-
- The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
- and never will be, but the 665 and 720/20 are supported by other
- drivers.
-
- This driver has an optional plugin (called PWCX), which is
- distributed as a binary module only. It contains code that allow you
- to use higher resolutions and framerates but may not be distributed
- as source. But even without this plugin you can these cams for most
- applications.
-
- See <file:Documentation/usb/philips.txt> for more information and
- installation instructions.
-
- The built-in microphone is enabled by selecting USB Audio support.
-
- This driver uses the Video For Linux API. You must say Y or M to
- "Video For Linux" (under Character Devices) to use this driver.
- Information on this API and pointers to "v4l" programs may be found
- at <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called pwc.
-
config USB_SE401
tristate "USB SE401 Camera support"
depends on USB && VIDEO_DEV
# Makefile for USB Media drivers
#
-pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o
sn9c102-objs := sn9c102_core.o sn9c102_pas106b.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o sn9c102_pas202bcb.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o
obj-$(CONFIG_USB_OV511) += ov511.o
-obj-$(CONFIG_USB_PWC) += pwc.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_SN9C102) += sn9c102.o
obj-$(CONFIG_USB_STV680) += stv680.o
+++ /dev/null
-/* Driver for Philips webcam
- Functions that send various control messages to the webcam, including
- video modes.
- (C) 1999-2003 Nemosoft Unv. (webcam@smcc.demon.nl)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-/*
- Changes
- 2001/08/03 Alvarado Added methods for changing white balance and
- red/green gains
- */
-
-/* Control functions for the cam; brightness, contrast, video mode, etc. */
-
-#ifdef __KERNEL__
-#include <asm/uaccess.h>
-#endif
-#include <asm/errno.h>
-#include <linux/version.h>
-
-#include "pwc.h"
-#include "pwc-ioctl.h"
-
-/* Request types: video */
-#define SET_LUM_CTL 0x01
-#define GET_LUM_CTL 0x02
-#define SET_CHROM_CTL 0x03
-#define GET_CHROM_CTL 0x04
-#define SET_STATUS_CTL 0x05
-#define GET_STATUS_CTL 0x06
-#define SET_EP_STREAM_CTL 0x07
-#define GET_EP_STREAM_CTL 0x08
-#define SET_MPT_CTL 0x0D
-#define GET_MPT_CTL 0x0E
-
-/* Selectors for the Luminance controls [GS]ET_LUM_CTL */
-#define AGC_MODE_FORMATTER 0x2000
-#define PRESET_AGC_FORMATTER 0x2100
-#define SHUTTER_MODE_FORMATTER 0x2200
-#define PRESET_SHUTTER_FORMATTER 0x2300
-#define PRESET_CONTOUR_FORMATTER 0x2400
-#define AUTO_CONTOUR_FORMATTER 0x2500
-#define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600
-#define CONTRAST_FORMATTER 0x2700
-#define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800
-#define FLICKERLESS_MODE_FORMATTER 0x2900
-#define AE_CONTROL_SPEED 0x2A00
-#define BRIGHTNESS_FORMATTER 0x2B00
-#define GAMMA_FORMATTER 0x2C00
-
-/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */
-#define WB_MODE_FORMATTER 0x1000
-#define AWB_CONTROL_SPEED_FORMATTER 0x1100
-#define AWB_CONTROL_DELAY_FORMATTER 0x1200
-#define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300
-#define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400
-#define COLOUR_MODE_FORMATTER 0x1500
-#define SATURATION_MODE_FORMATTER1 0x1600
-#define SATURATION_MODE_FORMATTER2 0x1700
-
-/* Selectors for the Status controls [GS]ET_STATUS_CTL */
-#define SAVE_USER_DEFAULTS_FORMATTER 0x0200
-#define RESTORE_USER_DEFAULTS_FORMATTER 0x0300
-#define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400
-#define READ_AGC_FORMATTER 0x0500
-#define READ_SHUTTER_FORMATTER 0x0600
-#define READ_RED_GAIN_FORMATTER 0x0700
-#define READ_BLUE_GAIN_FORMATTER 0x0800
-#define SENSOR_TYPE_FORMATTER1 0x0C00
-#define READ_RAW_Y_MEAN_FORMATTER 0x3100
-#define SET_POWER_SAVE_MODE_FORMATTER 0x3200
-#define MIRROR_IMAGE_FORMATTER 0x3300
-#define LED_FORMATTER 0x3400
-#define SENSOR_TYPE_FORMATTER2 0x3700
-
-/* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */
-#define VIDEO_OUTPUT_CONTROL_FORMATTER 0x0100
-
-/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */
-#define PT_RELATIVE_CONTROL_FORMATTER 0x01
-#define PT_RESET_CONTROL_FORMATTER 0x02
-#define PT_STATUS_FORMATTER 0x03
-
-static char *size2name[PSZ_MAX] =
-{
- "subQCIF",
- "QSIF",
- "QCIF",
- "SIF",
- "CIF",
- "VGA",
-};
-
-/********/
-
-/* Entries for the Nala (645/646) camera; the Nala doesn't have compression
- preferences, so you either get compressed or non-compressed streams.
-
- An alternate value of 0 means this mode is not available at all.
- */
-
-struct Nala_table_entry {
- char alternate; /* USB alternate setting */
- int compressed; /* Compressed yes/no */
-
- unsigned char mode[3]; /* precomputed mode table */
-};
-
-static struct Nala_table_entry Nala_table[PSZ_MAX][8] =
-{
-#include "pwc_nala.h"
-};
-
-/* This tables contains entries for the 675/680/690 (Timon) camera, with
- 4 different qualities (no compression, low, medium, high).
- It lists the bandwidth requirements for said mode by its alternate interface
- number. An alternate of 0 means that the mode is unavailable.
-
- There are 6 * 4 * 4 entries:
- 6 different resolutions subqcif, qsif, qcif, sif, cif, vga
- 6 framerates: 5, 10, 15, 20, 25, 30
- 4 compression modi: none, low, medium, high
-
- When an uncompressed mode is not available, the next available compressed mode
- will be chosen (unless the decompressor is absent). Sometimes there are only
- 1 or 2 compressed modes available; in that case entries are duplicated.
-*/
-struct Timon_table_entry
-{
- char alternate; /* USB alternate interface */
- unsigned short packetsize; /* Normal packet size */
- unsigned short bandlength; /* Bandlength when decompressing */
- unsigned char mode[13]; /* precomputed mode settings for cam */
-};
-
-static struct Timon_table_entry Timon_table[PSZ_MAX][6][4] =
-{
-#include "pwc_timon.h"
-};
-
-/* Entries for the Kiara (730/740/750) camera */
-
-struct Kiara_table_entry
-{
- char alternate; /* USB alternate interface */
- unsigned short packetsize; /* Normal packet size */
- unsigned short bandlength; /* Bandlength when decompressing */
- unsigned char mode[12]; /* precomputed mode settings for cam */
-};
-
-static struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] =
-{
-#include "pwc_kiara.h"
-};
-
-
-/****************************************************************************/
-
-
-#define SendControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, HZ / 2)
-
-#define RecvControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, HZ / 2)
-
-
-#if PWC_DEBUG
-void pwc_hexdump(void *p, int len)
-{
- int i;
- unsigned char *s;
- char buf[100], *d;
-
- s = (unsigned char *)p;
- d = buf;
- *d = '\0';
- Debug("Doing hexdump @ %p, %d bytes.\n", p, len);
- for (i = 0; i < len; i++) {
- d += sprintf(d, "%02X ", *s++);
- if ((i & 0xF) == 0xF) {
- Debug("%s\n", buf);
- d = buf;
- *d = '\0';
- }
- }
- if ((i & 0xF) != 0)
- Debug("%s\n", buf);
-}
-#endif
-
-static inline int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
-{
- return usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- SET_EP_STREAM_CTL,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- VIDEO_OUTPUT_CONTROL_FORMATTER,
- index,
- buf, buflen, HZ);
-}
-
-
-
-static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
-{
- unsigned char buf[3];
- int ret, fps;
- struct Nala_table_entry *pEntry;
- int frames2frames[31] =
- { /* closest match of framerate */
- 0, 0, 0, 0, 4, /* 0-4 */
- 5, 5, 7, 7, 10, /* 5-9 */
- 10, 10, 12, 12, 15, /* 10-14 */
- 15, 15, 15, 20, 20, /* 15-19 */
- 20, 20, 20, 24, 24, /* 20-24 */
- 24, 24, 24, 24, 24, /* 25-29 */
- 24 /* 30 */
- };
- int frames2table[31] =
- { 0, 0, 0, 0, 0, /* 0-4 */
- 1, 1, 1, 2, 2, /* 5-9 */
- 3, 3, 4, 4, 4, /* 10-14 */
- 5, 5, 5, 5, 5, /* 15-19 */
- 6, 6, 6, 6, 7, /* 20-24 */
- 7, 7, 7, 7, 7, /* 25-29 */
- 7 /* 30 */
- };
-
- if (size < 0 || size > PSZ_CIF || frames < 4 || frames > 25)
- return -EINVAL;
- frames = frames2frames[frames];
- fps = frames2table[frames];
- pEntry = &Nala_table[size][fps];
- if (pEntry->alternate == 0)
- return -EINVAL;
-
- if (pEntry->compressed && pdev->decompressor == NULL)
- return -ENOENT; /* Not supported. */
-
- memcpy(buf, pEntry->mode, 3);
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
- if (ret < 0) {
- Debug("Failed to send video command... %d\n", ret);
- return ret;
- }
-
- pdev->cmd_len = 3;
- memcpy(pdev->cmd_buf, buf, 3);
-
- /* Set various parameters */
- pdev->vframes = frames;
- pdev->vsize = size;
- pdev->valternate = pEntry->alternate;
- pdev->image = pwc_image_sizes[size];
- pdev->frame_size = (pdev->image.x * pdev->image.y * 3) / 2;
- if (pEntry->compressed) {
- if (pdev->release < 5) { /* 4 fold compression */
- pdev->vbandlength = 528;
- pdev->frame_size /= 4;
- }
- else {
- pdev->vbandlength = 704;
- pdev->frame_size /= 3;
- }
- }
- else
- pdev->vbandlength = 0;
- return 0;
-}
-
-
-static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, int compression, int snapshot)
-{
- unsigned char buf[13];
- struct Timon_table_entry *pChoose;
- int ret, fps;
-
- if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3)
- return -EINVAL;
- if (size == PSZ_VGA && frames > 15)
- return -EINVAL;
- fps = (frames / 5) - 1;
-
- /* Find a supported framerate with progressively higher compression ratios
- if the preferred ratio is not available.
- */
- pChoose = NULL;
- if (pdev->decompressor == NULL) {
-#if PWC_DEBUG
- Debug("Trying to find uncompressed mode.\n");
-#endif
- pChoose = &Timon_table[size][fps][0];
- }
- else {
- while (compression <= 3) {
- pChoose = &Timon_table[size][fps][compression];
- if (pChoose->alternate != 0)
- break;
- compression++;
- }
- }
- if (pChoose == NULL || pChoose->alternate == 0)
- return -ENOENT; /* Not supported. */
-
- memcpy(buf, pChoose->mode, 13);
- if (snapshot)
- buf[0] |= 0x80;
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
- if (ret < 0)
- return ret;
-
- pdev->cmd_len = 13;
- memcpy(pdev->cmd_buf, buf, 13);
-
- /* Set various parameters */
- pdev->vframes = frames;
- pdev->vsize = size;
- pdev->vsnapshot = snapshot;
- pdev->valternate = pChoose->alternate;
- pdev->image = pwc_image_sizes[size];
- pdev->vbandlength = pChoose->bandlength;
- if (pChoose->bandlength > 0)
- pdev->frame_size = (pChoose->bandlength * pdev->image.y) / 4;
- else
- pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8;
- return 0;
-}
-
-
-static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, int compression, int snapshot)
-{
- struct Kiara_table_entry *pChoose = NULL;
- int fps, ret;
- unsigned char buf[12];
- struct Kiara_table_entry RawEntry = {6, 773, 1272, {0xAD, 0xF4, 0x10, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}};
-
- if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3)
- return -EINVAL;
- if (size == PSZ_VGA && frames > 15)
- return -EINVAL;
- fps = (frames / 5) - 1;
-
- /* special case: VGA @ 5 fps and snapshot is raw bayer mode */
- if (size == PSZ_VGA && frames == 5 && snapshot)
- {
- /* Only available in case the raw palette is selected or
- we have the decompressor available. This mode is
- only available in compressed form
- */
- if (pdev->vpalette == VIDEO_PALETTE_RAW || pdev->decompressor != NULL)
- {
- Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette);
- pChoose = &RawEntry;
- }
- else
- {
- Info("VGA/5 BAYER mode _must_ have a decompressor available, or use RAW palette.\n");
- }
- }
- else
- {
- /* Find a supported framerate with progressively higher compression ratios
- if the preferred ratio is not available.
- Skip this step when using RAW modes.
- */
- if (pdev->decompressor == NULL && pdev->vpalette != VIDEO_PALETTE_RAW) {
-#if PWC_DEBUG
- Debug("Trying to find uncompressed mode.\n");
-#endif
- pChoose = &Kiara_table[size][fps][0];
- }
- else {
- while (compression <= 3) {
- pChoose = &Kiara_table[size][fps][compression];
- if (pChoose->alternate != 0)
- break;
- compression++;
- }
- }
- }
- if (pChoose == NULL || pChoose->alternate == 0)
- return -ENOENT; /* Not supported. */
-
- /* usb_control_msg won't take staticly allocated arrays as argument?? */
- memcpy(buf, pChoose->mode, 12);
- if (snapshot)
- buf[0] |= 0x80;
-
- /* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
- ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
- if (ret < 0)
- return ret;
-
- pdev->cmd_len = 12;
- memcpy(pdev->cmd_buf, buf, 12);
- /* All set and go */
- pdev->vframes = frames;
- pdev->vsize = size;
- pdev->vsnapshot = snapshot;
- pdev->valternate = pChoose->alternate;
- pdev->image = pwc_image_sizes[size];
- pdev->vbandlength = pChoose->bandlength;
- if (pdev->vbandlength > 0)
- pdev->frame_size = (pdev->vbandlength * pdev->image.y) / 4;
- else
- pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8;
- return 0;
-}
-
-
-
-/**
- @pdev: device structure
- @width: viewport width
- @height: viewport height
- @frame: framerate, in fps
- @compression: preferred compression ratio
- @snapshot: snapshot mode or streaming
- */
-int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot)
-{
- int ret, size;
-
- Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette);
- size = pwc_decode_size(pdev, width, height);
- if (size < 0) {
- Debug("Could not find suitable size.\n");
- return -ERANGE;
- }
- Debug("decode_size = %d.\n", size);
-
- ret = -EINVAL;
- switch(pdev->type) {
- case 645:
- case 646:
- ret = set_video_mode_Nala(pdev, size, frames);
- break;
-
- case 675:
- case 680:
- case 690:
- ret = set_video_mode_Timon(pdev, size, frames, compression, snapshot);
- break;
-
- case 720:
- case 730:
- case 740:
- case 750:
- ret = set_video_mode_Kiara(pdev, size, frames, compression, snapshot);
- break;
- }
- if (ret < 0) {
- if (ret == -ENOENT)
- Info("Video mode %s@%d fps is only supported with the decompressor module (pwcx).\n", size2name[size], frames);
- else {
- Err("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret);
- }
- return ret;
- }
- pdev->view.x = width;
- pdev->view.y = height;
- pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size;
- pwc_set_image_buffer_size(pdev);
- Trace(TRACE_SIZE, "Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y);
- return 0;
-}
-
-
-void pwc_set_image_buffer_size(struct pwc_device *pdev)
-{
- int i, factor = 0, filler = 0;
-
- /* for PALETTE_YUV420P */
- switch(pdev->vpalette)
- {
- case VIDEO_PALETTE_YUV420P:
- factor = 6;
- filler = 128;
- break;
- case VIDEO_PALETTE_RAW:
- factor = 6; /* can be uncompressed YUV420P */
- filler = 0;
- break;
- }
-
- /* Set sizes in bytes */
- pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
- pdev->view.size = pdev->view.x * pdev->view.y * factor / 4;
-
- /* Align offset, or you'll get some very weird results in
- YUV420 mode... x must be multiple of 4 (to get the Y's in
- place), and y even (or you'll mixup U & V). This is less of a
- problem for YUV420P.
- */
- pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
- pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
-
- /* Fill buffers with gray or black */
- for (i = 0; i < MAX_IMAGES; i++) {
- if (pdev->image_ptr[i] != NULL)
- memset(pdev->image_ptr[i], filler, pdev->view.size);
- }
-}
-
-
-
-/* BRIGHTNESS */
-
-int pwc_get_brightness(struct pwc_device *pdev)
-{
- char buf;
- int ret;
-
- ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
- if (ret < 0)
- return ret;
- return buf << 9;
-}
-
-int pwc_set_brightness(struct pwc_device *pdev, int value)
-{
- char buf;
-
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- buf = (value >> 9) & 0x7f;
- return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
-}
-
-/* CONTRAST */
-
-int pwc_get_contrast(struct pwc_device *pdev)
-{
- char buf;
- int ret;
-
- ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
- if (ret < 0)
- return ret;
- return buf << 10;
-}
-
-int pwc_set_contrast(struct pwc_device *pdev, int value)
-{
- char buf;
-
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- buf = (value >> 10) & 0x3f;
- return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
-}
-
-/* GAMMA */
-
-int pwc_get_gamma(struct pwc_device *pdev)
-{
- char buf;
- int ret;
-
- ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
- if (ret < 0)
- return ret;
- return buf << 11;
-}
-
-int pwc_set_gamma(struct pwc_device *pdev, int value)
-{
- char buf;
-
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- buf = (value >> 11) & 0x1f;
- return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
-}
-
-
-/* SATURATION */
-
-int pwc_get_saturation(struct pwc_device *pdev)
-{
- char buf;
- int ret;
-
- if (pdev->type < 675)
- return -1;
- ret = RecvControlMsg(GET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1);
- if (ret < 0)
- return ret;
- return 32768 + buf * 327;
-}
-
-int pwc_set_saturation(struct pwc_device *pdev, int value)
-{
- char buf;
-
- if (pdev->type < 675)
- return -EINVAL;
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- /* saturation ranges from -100 to +100 */
- buf = (value - 32768) / 327;
- return SendControlMsg(SET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1);
-}
-
-/* AGC */
-
-static inline int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
-{
- char buf;
- int ret;
-
- if (mode)
- buf = 0x0; /* auto */
- else
- buf = 0xff; /* fixed */
-
- ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
-
- if (!mode && ret >= 0) {
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- buf = (value >> 10) & 0x3F;
- ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
- }
- if (ret < 0)
- return ret;
- return 0;
-}
-
-static inline int pwc_get_agc(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
- if (ret < 0)
- return ret;
-
- if (buf != 0) { /* fixed */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
- if (ret < 0)
- return ret;
- if (buf > 0x3F)
- buf = 0x3F;
- *value = (buf << 10);
- }
- else { /* auto */
- ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
- if (ret < 0)
- return ret;
- /* Gah... this value ranges from 0x00 ... 0x9F */
- if (buf > 0x9F)
- buf = 0x9F;
- *value = -(48 + buf * 409);
- }
-
- return 0;
-}
-
-static inline int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
-{
- char buf[2];
- int speed, ret;
-
-
- if (mode)
- buf[0] = 0x0; /* auto */
- else
- buf[0] = 0xff; /* fixed */
-
- ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
-
- if (!mode && ret >= 0) {
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- switch(pdev->type) {
- case 675:
- case 680:
- case 690:
- /* speed ranges from 0x0 to 0x290 (656) */
- speed = (value / 100);
- buf[1] = speed >> 8;
- buf[0] = speed & 0xff;
- break;
- case 720:
- case 730:
- case 740:
- case 750:
- /* speed seems to range from 0x0 to 0xff */
- buf[1] = 0;
- buf[0] = value >> 8;
- break;
- }
-
- ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
- }
- return ret;
-}
-
-
-/* POWER */
-
-int pwc_camera_power(struct pwc_device *pdev, int power)
-{
- char buf;
-
- if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6))
- return 0; /* Not supported by Nala or Timon < release 6 */
-
- if (power)
- buf = 0x00; /* active */
- else
- buf = 0xFF; /* power save */
- return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
-}
-
-
-
-/* private calls */
-
-static inline int pwc_restore_user(struct pwc_device *pdev)
-{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
-}
-
-static inline int pwc_save_user(struct pwc_device *pdev)
-{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
-}
-
-static inline int pwc_restore_factory(struct pwc_device *pdev)
-{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
-}
-
- /* ************************************************* */
- /* Patch by Alvarado: (not in the original version */
-
- /*
- * the camera recognizes modes from 0 to 4:
- *
- * 00: indoor (incandescant lighting)
- * 01: outdoor (sunlight)
- * 02: fluorescent lighting
- * 03: manual
- * 04: auto
- */
-static inline int pwc_set_awb(struct pwc_device *pdev, int mode)
-{
- char buf;
- int ret;
-
- if (mode < 0)
- mode = 0;
-
- if (mode > 4)
- mode = 4;
-
- buf = mode & 0x07; /* just the lowest three bits */
-
- ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
-
- if (ret < 0)
- return ret;
- return 0;
-}
-
-static inline int pwc_get_awb(struct pwc_device *pdev)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
-
- if (ret < 0)
- return ret;
- return buf;
-}
-
-static inline int pwc_set_red_gain(struct pwc_device *pdev, int value)
-{
- unsigned char buf;
-
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- /* only the msb is considered */
- buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
-}
-
-static inline int pwc_get_red_gain(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *value = buf << 8;
- return 0;
-}
-
-
-static inline int pwc_set_blue_gain(struct pwc_device *pdev, int value)
-{
- unsigned char buf;
-
- if (value < 0)
- value = 0;
- if (value > 0xffff)
- value = 0xffff;
- /* only the msb is considered */
- buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
-}
-
-static inline int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *value = buf << 8;
- return 0;
-}
-
-
-/* The following two functions are different, since they only read the
- internal red/blue gains, which may be different from the manual
- gains set or read above.
- */
-static inline int pwc_read_red_gain(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *value = buf << 8;
- return 0;
-}
-
-static inline int pwc_read_blue_gain(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *value = buf << 8;
- return 0;
-}
-
-
-static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
-{
- unsigned char buf;
-
- /* useful range is 0x01..0x20 */
- buf = speed / 0x7f0;
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
-}
-
-static inline int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *value = buf * 0x7f0;
- return 0;
-}
-
-
-static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay)
-{
- unsigned char buf;
-
- /* useful range is 0x01..0x3F */
- buf = (delay >> 10);
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
-}
-
-static inline int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *value = buf << 10;
- return 0;
-}
-
-
-int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
-{
- unsigned char buf[2];
-
- if (pdev->type < 730)
- return 0;
- on_value /= 100;
- off_value /= 100;
- if (on_value < 0)
- on_value = 0;
- if (on_value > 0xff)
- on_value = 0xff;
- if (off_value < 0)
- off_value = 0;
- if (off_value > 0xff)
- off_value = 0xff;
-
- buf[0] = on_value;
- buf[1] = off_value;
-
- return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
-}
-
-int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
-{
- unsigned char buf[2];
- int ret;
-
- if (pdev->type < 730) {
- *on_value = -1;
- *off_value = -1;
- return 0;
- }
-
- ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
- if (ret < 0)
- return ret;
- *on_value = buf[0] * 100;
- *off_value = buf[1] * 100;
- return 0;
-}
-
-static inline int pwc_set_contour(struct pwc_device *pdev, int contour)
-{
- unsigned char buf;
- int ret;
-
- if (contour < 0)
- buf = 0xff; /* auto contour on */
- else
- buf = 0x0; /* auto contour off */
- ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
- if (ret < 0)
- return ret;
-
- if (contour < 0)
- return 0;
- if (contour > 0xffff)
- contour = 0xffff;
-
- buf = (contour >> 10); /* contour preset is [0..3f] */
- ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
- if (ret < 0)
- return ret;
- return 0;
-}
-
-static inline int pwc_get_contour(struct pwc_device *pdev, int *contour)
-{
- unsigned char buf;
- int ret;
-
- ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
- if (ret < 0)
- return ret;
-
- if (buf == 0) {
- /* auto mode off, query current preset value */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *contour = buf << 10;
- }
- else
- *contour = -1;
- return 0;
-}
-
-
-static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight)
-{
- unsigned char buf;
-
- if (backlight)
- buf = 0xff;
- else
- buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
-}
-
-static inline int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
-{
- int ret;
- unsigned char buf;
-
- ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *backlight = buf;
- return 0;
-}
-
-
-static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker)
-{
- unsigned char buf;
-
- if (flicker)
- buf = 0xff;
- else
- buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
-}
-
-static inline int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
-{
- int ret;
- unsigned char buf;
-
- ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *flicker = buf;
- return 0;
-}
-
-
-static inline int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
-{
- unsigned char buf;
-
- if (noise < 0)
- noise = 0;
- if (noise > 3)
- noise = 3;
- buf = noise;
- return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
-}
-
-static inline int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
-{
- int ret;
- unsigned char buf;
-
- ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
- if (ret < 0)
- return ret;
- *noise = buf;
- return 0;
-}
-
-int pwc_mpt_reset(struct pwc_device *pdev, int flags)
-{
- unsigned char buf;
-
- buf = flags & 0x03; // only lower two bits are currently used
- return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
-}
-
-static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
-{
- unsigned char buf[4];
-
- /* set new relative angle; angles are expressed in degrees * 100,
- but cam as .5 degree resolution, hence devide by 200. Also
- the angle must be multiplied by 64 before it's send to
- the cam (??)
- */
- pan = 64 * pan / 100;
- tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */
- buf[0] = pan & 0xFF;
- buf[1] = (pan >> 8) & 0xFF;
- buf[2] = tilt & 0xFF;
- buf[3] = (tilt >> 8) & 0xFF;
- return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
-}
-
-static inline int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status)
-{
- int ret;
- unsigned char buf[5];
-
- ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
- if (ret < 0)
- return ret;
- status->status = buf[0] & 0x7; // 3 bits are used for reporting
- status->time_pan = (buf[1] << 8) + buf[2];
- status->time_tilt = (buf[3] << 8) + buf[4];
- return 0;
-}
-
-
-int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
-{
- unsigned char buf;
- int ret = -1, request;
-
- if (pdev->type < 675)
- request = SENSOR_TYPE_FORMATTER1;
- else if (pdev->type < 730)
- return -1; /* The Vesta series doesn't have this call */
- else
- request = SENSOR_TYPE_FORMATTER2;
-
- ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
- if (ret < 0)
- return ret;
- if (pdev->type < 675)
- *sensor = buf | 0x100;
- else
- *sensor = buf;
- return 0;
-}
-
-
- /* End of Add-Ons */
- /* ************************************************* */
-
-/* Linux 2.5.something and 2.6 pass direct pointers to arguments of
- ioctl() calls. With 2.4, you have to do tedious copy_from_user()
- and copy_to_user() calls. With these macros we circumvent this,
- and let me maintain only one source file. The functionality is
- exactly the same otherwise.
- */
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
-
-/* define local variable for arg */
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type *ARG_name = arg;
-/* copy arg to local variable */
-#define ARG_IN(ARG_name) /* nothing */
-/* argument itself (referenced) */
-#define ARGR(ARG_name) (*ARG_name)
-/* argument address */
-#define ARGA(ARG_name) ARG_name
-/* copy local variable to arg */
-#define ARG_OUT(ARG_name) /* nothing */
-
-#else
-
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type ARG_name;
-#define ARG_IN(ARG_name)\
- if (copy_from_user(&ARG_name, arg, sizeof(ARG_name))) {\
- ret = -EFAULT;\
- break;\
- }
-#define ARGR(ARG_name) ARG_name
-#define ARGA(ARG_name) &ARG_name
-#define ARG_OUT(ARG_name)\
- if (copy_to_user(arg, &ARG_name, sizeof(ARG_name))) {\
- ret = -EFAULT;\
- break;\
- }
-
-#endif
-
-int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
-{
- int ret = 0;
-
- switch(cmd) {
- case VIDIOCPWCRUSER:
- {
- if (pwc_restore_user(pdev))
- ret = -EINVAL;
- break;
- }
-
- case VIDIOCPWCSUSER:
- {
- if (pwc_save_user(pdev))
- ret = -EINVAL;
- break;
- }
-
- case VIDIOCPWCFACTORY:
- {
- if (pwc_restore_factory(pdev))
- ret = -EINVAL;
- break;
- }
-
- case VIDIOCPWCSCQUAL:
- {
- ARG_DEF(int, qual)
-
- ARG_IN(qual)
- if (ARGR(qual) < 0 || ARGR(qual) > 3)
- ret = -EINVAL;
- else
- ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
- if (ret >= 0)
- pdev->vcompression = ARGR(qual);
- break;
- }
-
- case VIDIOCPWCGCQUAL:
- {
- ARG_DEF(int, qual)
-
- ARGR(qual) = pdev->vcompression;
- ARG_OUT(qual)
- break;
- }
-
- case VIDIOCPWCPROBE:
- {
- ARG_DEF(struct pwc_probe, probe)
-
- strcpy(ARGR(probe).name, pdev->vdev->name);
- ARGR(probe).type = pdev->type;
- ARG_OUT(probe)
- break;
- }
-
- case VIDIOCPWCGSERIAL:
- {
- ARG_DEF(struct pwc_serial, serial)
-
- strcpy(ARGR(serial).serial, pdev->serial);
- ARG_OUT(serial)
- break;
- }
-
- case VIDIOCPWCSAGC:
- {
- ARG_DEF(int, agc)
-
- ARG_IN(agc)
- if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
- ret = -EINVAL;
- break;
- }
-
- case VIDIOCPWCGAGC:
- {
- ARG_DEF(int, agc)
-
- if (pwc_get_agc(pdev, ARGA(agc)))
- ret = -EINVAL;
- ARG_OUT(agc)
- break;
- }
-
- case VIDIOCPWCSSHUTTER:
- {
- ARG_DEF(int, shutter_speed)
-
- ARG_IN(shutter_speed)
- ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
- break;
- }
-
- case VIDIOCPWCSAWB:
- {
- ARG_DEF(struct pwc_whitebalance, wb)
-
- ARG_IN(wb)
- ret = pwc_set_awb(pdev, ARGR(wb).mode);
- if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
- pwc_set_red_gain(pdev, ARGR(wb).manual_red);
- pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
- }
- break;
- }
-
- case VIDIOCPWCGAWB:
- {
- ARG_DEF(struct pwc_whitebalance, wb)
-
- memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
- ARGR(wb).mode = pwc_get_awb(pdev);
- if (ARGR(wb).mode < 0)
- ret = -EINVAL;
- else {
- if (ARGR(wb).mode == PWC_WB_MANUAL) {
- ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
- if (ret < 0)
- break;
- ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
- if (ret < 0)
- break;
- }
- if (ARGR(wb).mode == PWC_WB_AUTO) {
- ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
- if (ret < 0)
- break;
- ret =pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
- if (ret < 0)
- break;
- }
- }
- ARG_OUT(wb)
- break;
- }
-
- case VIDIOCPWCSAWBSPEED:
- {
- ARG_DEF(struct pwc_wb_speed, wbs)
-
- if (ARGR(wbs).control_speed > 0) {
- ret = pwc_set_wb_speed(pdev, ARGR(wbs).control_speed);
- }
- if (ARGR(wbs).control_delay > 0) {
- ret = pwc_set_wb_delay(pdev, ARGR(wbs).control_delay);
- }
- break;
- }
-
- case VIDIOCPWCGAWBSPEED:
- {
- ARG_DEF(struct pwc_wb_speed, wbs)
-
- ret = pwc_get_wb_speed(pdev, &ARGR(wbs).control_speed);
- if (ret < 0)
- break;
- ret = pwc_get_wb_delay(pdev, &ARGR(wbs).control_delay);
- if (ret < 0)
- break;
- ARG_OUT(wbs)
- break;
- }
-
- case VIDIOCPWCSLED:
- {
- ARG_DEF(struct pwc_leds, leds)
-
- ARG_IN(leds)
- ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
- break;
- }
-
-
- case VIDIOCPWCGLED:
- {
- ARG_DEF(struct pwc_leds, leds)
-
- ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off);
- ARG_OUT(leds)
- break;
- }
-
- case VIDIOCPWCSCONTOUR:
- {
- ARG_DEF(int, contour)
-
- ARG_IN(contour)
- ret = pwc_set_contour(pdev, ARGR(contour));
- break;
- }
-
- case VIDIOCPWCGCONTOUR:
- {
- ARG_DEF(int, contour)
-
- ret = pwc_get_contour(pdev, ARGA(contour));
- ARG_OUT(contour)
- break;
- }
-
- case VIDIOCPWCSBACKLIGHT:
- {
- ARG_DEF(int, backlight)
-
- ARG_IN(backlight)
- ret = pwc_set_backlight(pdev, ARGR(backlight));
- break;
- }
-
- case VIDIOCPWCGBACKLIGHT:
- {
- ARG_DEF(int, backlight)
-
- ret = pwc_get_backlight(pdev, ARGA(backlight));
- ARG_OUT(backlight)
- break;
- }
-
- case VIDIOCPWCSFLICKER:
- {
- ARG_DEF(int, flicker)
-
- ARG_IN(flicker)
- ret = pwc_set_flicker(pdev, ARGR(flicker));
- break;
- }
-
- case VIDIOCPWCGFLICKER:
- {
- ARG_DEF(int, flicker)
-
- ret = pwc_get_flicker(pdev, ARGA(flicker));
- ARG_OUT(flicker)
- break;
- }
-
- case VIDIOCPWCSDYNNOISE:
- {
- ARG_DEF(int, dynnoise)
-
- ARG_IN(dynnoise)
- ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
- break;
- }
-
- case VIDIOCPWCGDYNNOISE:
- {
- ARG_DEF(int, dynnoise)
-
- ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
- ARG_OUT(dynnoise);
- break;
- }
-
- case VIDIOCPWCGREALSIZE:
- {
- ARG_DEF(struct pwc_imagesize, size)
-
- ARGR(size).width = pdev->image.x;
- ARGR(size).height = pdev->image.y;
- ARG_OUT(size)
- break;
- }
-
- case VIDIOCPWCMPTRESET:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(int, flags)
-
- ARG_IN(flags)
- ret = pwc_mpt_reset(pdev, ARGR(flags));
- if (ret >= 0)
- {
- pdev->pan_angle = 0;
- pdev->tilt_angle = 0;
- }
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTGRANGE:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_range, range)
-
- ARGR(range) = pdev->angle_range;
- ARG_OUT(range)
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTSANGLE:
- {
- int new_pan, new_tilt;
-
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_angles, angles)
-
- ARG_IN(angles)
- /* The camera can only set relative angles, so
- do some calculations when getting an absolute angle .
- */
- if (ARGR(angles).absolute)
- {
- new_pan = ARGR(angles).pan;
- new_tilt = ARGR(angles).tilt;
- }
- else
- {
- new_pan = pdev->pan_angle + ARGR(angles).pan;
- new_tilt = pdev->tilt_angle + ARGR(angles).tilt;
- }
- /* check absolute ranges */
- if (new_pan < pdev->angle_range.pan_min ||
- new_pan > pdev->angle_range.pan_max ||
- new_tilt < pdev->angle_range.tilt_min ||
- new_tilt > pdev->angle_range.tilt_max)
- {
- ret = -ERANGE;
- }
- else
- {
- /* go to relative range, check again */
- new_pan -= pdev->pan_angle;
- new_tilt -= pdev->tilt_angle;
- /* angles are specified in degrees * 100, thus the limit = 36000 */
- if (new_pan < -36000 || new_pan > 36000 || new_tilt < -36000 || new_tilt > 36000)
- ret = -ERANGE;
- }
- if (ret == 0) /* no errors so far */
- {
- ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt);
- if (ret >= 0)
- {
- pdev->pan_angle += new_pan;
- pdev->tilt_angle += new_tilt;
- }
- if (ret == -EPIPE) /* stall -> out of range */
- ret = -ERANGE;
- }
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTGANGLE:
- {
-
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_angles, angles)
-
- ARGR(angles).absolute = 1;
- ARGR(angles).pan = pdev->pan_angle;
- ARGR(angles).tilt = pdev->tilt_angle;
- ARG_OUT(angles)
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTSTATUS:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_status, status)
-
- ret = pwc_mpt_get_status(pdev, ARGA(status));
- ARG_OUT(status)
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCGVIDCMD:
- {
- ARG_DEF(struct pwc_video_command, cmd);
-
- ARGR(cmd).type = pdev->type;
- ARGR(cmd).release = pdev->release;
- ARGR(cmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(cmd).bandlength = pdev->vbandlength;
- ARGR(cmd).frame_size = pdev->frame_size;
- ARG_OUT(cmd)
- break;
- }
-
- default:
- ret = -ENOIOCTLCMD;
- break;
- }
-
- if (ret > 0)
- return 0;
- return ret;
-}
-
-
-
+++ /dev/null
-/* Linux driver for Philips webcam
- USB and Video4Linux interface part.
- (C) 1999-2004 Nemosoft Unv.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-*/
-
-/*
- This code forms the interface between the USB layers and the Philips
- specific stuff. Some adanved stuff of the driver falls under an
- NDA, signed between me and Philips B.V., Eindhoven, the Netherlands, and
- is thus not distributed in source form. The binary pwcx.o module
- contains the code that falls under the NDA.
-
- In case you're wondering: 'pwc' stands for "Philips WebCam", but
- I really didn't want to type 'philips_web_cam' every time (I'm lazy as
- any Linux kernel hacker, but I don't like uncomprehensible abbreviations
- without explanation).
-
- Oh yes, convention: to disctinguish between all the various pointers to
- device-structures, I use these names for the pointer variables:
- udev: struct usb_device *
- vdev: struct video_device *
- pdev: struct pwc_devive *
-*/
-
-/* Contributors:
- - Alvarado: adding whitebalance code
- - Alistar Moire: QuickCam 3000 Pro device/product ID
- - Tony Hoyle: Creative Labs Webcam 5 device/product ID
- - Mark Burazin: solving hang in VIDIOCSYNC when camera gets unplugged
- - Jk Fang: Sotec Afina Eye ID
- - Xavier Roche: QuickCam Pro 4000 ID
- - Jens Knudsen: QuickCam Zoom ID
- - J. Debert: QuickCam for Notebooks ID
-*/
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <asm/io.h>
-
-#include "pwc.h"
-#include "pwc-ioctl.h"
-
-/* Function prototypes and driver templates */
-
-/* hotplug device table support */
-static struct usb_device_id pwc_device_table [] = {
- { USB_DEVICE(0x0471, 0x0302) }, /* Philips models */
- { USB_DEVICE(0x0471, 0x0303) },
- { USB_DEVICE(0x0471, 0x0304) },
- { USB_DEVICE(0x0471, 0x0307) },
- { USB_DEVICE(0x0471, 0x0308) },
- { USB_DEVICE(0x0471, 0x030C) },
- { USB_DEVICE(0x0471, 0x0310) },
- { USB_DEVICE(0x0471, 0x0311) },
- { USB_DEVICE(0x0471, 0x0312) },
- { USB_DEVICE(0x0471, 0x0313) }, /* the 'new' 720K */
- { USB_DEVICE(0x069A, 0x0001) }, /* Askey */
- { USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam Pro 3000 */
- { USB_DEVICE(0x046D, 0x08B1) }, /* Logitech QuickCam Notebook Pro */
- { USB_DEVICE(0x046D, 0x08B2) }, /* Logitech QuickCam Pro 4000 */
- { USB_DEVICE(0x046D, 0x08B3) }, /* Logitech QuickCam Zoom (old model) */
- { USB_DEVICE(0x046D, 0x08B4) }, /* Logitech QuickCam Zoom (new model) */
- { USB_DEVICE(0x046D, 0x08B5) }, /* Logitech QuickCam Orbit/Sphere */
- { USB_DEVICE(0x046D, 0x08B6) }, /* Logitech (reserved) */
- { USB_DEVICE(0x046D, 0x08B7) }, /* Logitech (reserved) */
- { USB_DEVICE(0x046D, 0x08B8) }, /* Logitech (reserved) */
- { USB_DEVICE(0x055D, 0x9000) }, /* Samsung */
- { USB_DEVICE(0x055D, 0x9001) },
- { USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */
- { USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */
- { USB_DEVICE(0x04CC, 0x8116) }, /* Afina Eye */
- { USB_DEVICE(0x06BE, 0x8116) }, /* new Afina Eye */
- { USB_DEVICE(0x0d81, 0x1910) }, /* Visionite */
- { USB_DEVICE(0x0d81, 0x1900) },
- { }
-};
-MODULE_DEVICE_TABLE(usb, pwc_device_table);
-
-static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id);
-static void usb_pwc_disconnect(struct usb_interface *intf);
-
-static struct usb_driver pwc_driver = {
- .owner = THIS_MODULE,
- .name = "Philips webcam", /* name */
- .id_table = pwc_device_table,
- .probe = usb_pwc_probe, /* probe() */
- .disconnect = usb_pwc_disconnect, /* disconnect() */
-};
-
-#define MAX_DEV_HINTS 20
-#define MAX_ISOC_ERRORS 20
-
-static int default_size = PSZ_QCIF;
-static int default_fps = 10;
-static int default_fbufs = 3; /* Default number of frame buffers */
-static int default_mbufs = 2; /* Default number of mmap() buffers */
- int pwc_trace = TRACE_MODULE | TRACE_FLOW | TRACE_PWCX;
-static int power_save = 0;
-static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */
- int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */
-static struct {
- int type;
- char serial_number[30];
- int device_node;
- struct pwc_device *pdev;
-} device_hint[MAX_DEV_HINTS];
-
-/***/
-
-static int pwc_video_open(struct inode *inode, struct file *file);
-static int pwc_video_close(struct inode *inode, struct file *file);
-static ssize_t pwc_video_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos);
-static unsigned int pwc_video_poll(struct file *file, poll_table *wait);
-static int pwc_video_ioctl(struct inode *inode, struct file *file,
- unsigned int ioctlnr, unsigned long arg);
-static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma);
-
-static struct file_operations pwc_fops = {
- .owner = THIS_MODULE,
- .open = pwc_video_open,
- .release = pwc_video_close,
- .read = pwc_video_read,
- .poll = pwc_video_poll,
- .mmap = pwc_video_mmap,
- .ioctl = pwc_video_ioctl,
- .llseek = no_llseek,
-};
-static struct video_device pwc_template = {
- .owner = THIS_MODULE,
- .name = "Philips Webcam", /* Filled in later */
- .type = VID_TYPE_CAPTURE,
- .hardware = VID_HARDWARE_PWC,
- .release = video_device_release,
- .fops = &pwc_fops,
- .minor = -1,
-};
-
-/***************************************************************************/
-
-/* Okay, this is some magic that I worked out and the reasoning behind it...
-
- The biggest problem with any USB device is of course: "what to do
- when the user unplugs the device while it is in use by an application?"
- We have several options:
- 1) Curse them with the 7 plagues when they do (requires divine intervention)
- 2) Tell them not to (won't work: they'll do it anyway)
- 3) Oops the kernel (this will have a negative effect on a user's uptime)
- 4) Do something sensible.
-
- Of course, we go for option 4.
-
- It happens that this device will be linked to two times, once from
- usb_device and once from the video_device in their respective 'private'
- pointers. This is done when the device is probed() and all initialization
- succeeded. The pwc_device struct links back to both structures.
-
- When a device is unplugged while in use it will be removed from the
- list of known USB devices; I also de-register it as a V4L device, but
- unfortunately I can't free the memory since the struct is still in use
- by the file descriptor. This free-ing is then deferend until the first
- opportunity. Crude, but it works.
-
- A small 'advantage' is that if a user unplugs the cam and plugs it back
- in, it should get assigned the same video device minor, but unfortunately
- it's non-trivial to re-link the cam back to the video device... (that
- would surely be magic! :))
-*/
-
-/***************************************************************************/
-/* Private functions */
-
-/* Here we want the physical address of the memory.
- * This is used when initializing the contents of the area.
- */
-static inline unsigned long kvirt_to_pa(unsigned long adr)
-{
- unsigned long kva, ret;
-
- kva = (unsigned long) page_address(vmalloc_to_page((void *)adr));
- kva |= adr & (PAGE_SIZE-1); /* restore the offset */
- ret = __pa(kva);
- return ret;
-}
-
-static void * rvmalloc(unsigned long size)
-{
- void * mem;
- unsigned long adr;
-
- size=PAGE_ALIGN(size);
- mem=vmalloc_32(size);
- if (mem)
- {
- memset(mem, 0, size); /* Clear the ram out, no junk to the user */
- adr=(unsigned long) mem;
- while (size > 0)
- {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr+=PAGE_SIZE;
- size-=PAGE_SIZE;
- }
- }
- return mem;
-}
-
-static void rvfree(void * mem, unsigned long size)
-{
- unsigned long adr;
-
- if (mem)
- {
- adr=(unsigned long) mem;
- while ((long) size > 0)
- {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr+=PAGE_SIZE;
- size-=PAGE_SIZE;
- }
- vfree(mem);
- }
-}
-
-
-
-
-static int pwc_allocate_buffers(struct pwc_device *pdev)
-{
- int i;
- void *kbuf;
-
- Trace(TRACE_MEMORY, ">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev);
-
- if (pdev == NULL)
- return -ENXIO;
-
-#ifdef PWC_MAGIC
- if (pdev->magic != PWC_MAGIC) {
- Err("allocate_buffers(): magic failed.\n");
- return -ENXIO;
- }
-#endif
- /* Allocate Isochronuous pipe buffers */
- for (i = 0; i < MAX_ISO_BUFS; i++) {
- if (pdev->sbuf[i].data == NULL) {
- kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
- if (kbuf == NULL) {
- Err("Failed to allocate iso buffer %d.\n", i);
- return -ENOMEM;
- }
- Trace(TRACE_MEMORY, "Allocated iso buffer at %p.\n", kbuf);
- pdev->sbuf[i].data = kbuf;
- memset(kbuf, 0, ISO_BUFFER_SIZE);
- }
- }
-
- /* Allocate frame buffer structure */
- if (pdev->fbuf == NULL) {
- kbuf = kmalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL);
- if (kbuf == NULL) {
- Err("Failed to allocate frame buffer structure.\n");
- return -ENOMEM;
- }
- Trace(TRACE_MEMORY, "Allocated frame buffer structure at %p.\n", kbuf);
- pdev->fbuf = kbuf;
- memset(kbuf, 0, default_fbufs * sizeof(struct pwc_frame_buf));
- }
- /* create frame buffers, and make circular ring */
- for (i = 0; i < default_fbufs; i++) {
- if (pdev->fbuf[i].data == NULL) {
- kbuf = vmalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
- if (kbuf == NULL) {
- Err("Failed to allocate frame buffer %d.\n", i);
- return -ENOMEM;
- }
- Trace(TRACE_MEMORY, "Allocated frame buffer %d at %p.\n", i, kbuf);
- pdev->fbuf[i].data = kbuf;
- memset(kbuf, 128, PWC_FRAME_SIZE);
- }
- }
-
- /* Allocate decompressor table space */
- kbuf = NULL;
- pdev->decompress_data = kbuf;
-
- /* Allocate image buffer; double buffer for mmap() */
- kbuf = rvmalloc(default_mbufs * pdev->len_per_image);
- if (kbuf == NULL) {
- Err("Failed to allocate image buffer(s).\n");
- return -ENOMEM;
- }
- Trace(TRACE_MEMORY, "Allocated image buffer at %p.\n", kbuf);
- pdev->image_data = kbuf;
- for (i = 0; i < default_mbufs; i++)
- pdev->image_ptr[i] = kbuf + i * pdev->len_per_image;
- for (; i < MAX_IMAGES; i++)
- pdev->image_ptr[i] = NULL;
-
- kbuf = NULL;
-
- Trace(TRACE_MEMORY, "<< pwc_allocate_buffers()\n");
- return 0;
-}
-
-static void pwc_free_buffers(struct pwc_device *pdev)
-{
- int i;
-
- Trace(TRACE_MEMORY, "Entering free_buffers(%p).\n", pdev);
-
- if (pdev == NULL)
- return;
-#ifdef PWC_MAGIC
- if (pdev->magic != PWC_MAGIC) {
- Err("free_buffers(): magic failed.\n");
- return;
- }
-#endif
-
- /* Release Iso-pipe buffers */
- for (i = 0; i < MAX_ISO_BUFS; i++)
- if (pdev->sbuf[i].data != NULL) {
- Trace(TRACE_MEMORY, "Freeing ISO buffer at %p.\n", pdev->sbuf[i].data);
- kfree(pdev->sbuf[i].data);
- pdev->sbuf[i].data = NULL;
- }
-
- /* The same for frame buffers */
- if (pdev->fbuf != NULL) {
- for (i = 0; i < default_fbufs; i++) {
- if (pdev->fbuf[i].data != NULL) {
- Trace(TRACE_MEMORY, "Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data);
- vfree(pdev->fbuf[i].data);
- pdev->fbuf[i].data = NULL;
- }
- }
- kfree(pdev->fbuf);
- pdev->fbuf = NULL;
- }
-
- /* Intermediate decompression buffer & tables */
- if (pdev->decompress_data != NULL) {
- Trace(TRACE_MEMORY, "Freeing decompression buffer at %p.\n", pdev->decompress_data);
- kfree(pdev->decompress_data);
- pdev->decompress_data = NULL;
- }
- pdev->decompressor = NULL;
-
- /* Release image buffers */
- if (pdev->image_data != NULL) {
- Trace(TRACE_MEMORY, "Freeing image buffer at %p.\n", pdev->image_data);
- rvfree(pdev->image_data, default_mbufs * pdev->len_per_image);
- }
- pdev->image_data = NULL;
-
- Trace(TRACE_MEMORY, "Leaving free_buffers().\n");
-}
-
-/* The frame & image buffer mess.
-
- Yes, this is a mess. Well, it used to be simple, but alas... In this
- module, 3 buffers schemes are used to get the data from the USB bus to
- the user program. The first scheme involves the ISO buffers (called thus
- since they transport ISO data from the USB controller), and not really
- interesting. Suffices to say the data from this buffer is quickly
- gathered in an interrupt handler (pwc_isoc_handler) and placed into the
- frame buffer.
-
- The frame buffer is the second scheme, and is the central element here.
- It collects the data from a single frame from the camera (hence, the
- name). Frames are delimited by the USB camera with a short USB packet,
- so that's easy to detect. The frame buffers form a list that is filled
- by the camera+USB controller and drained by the user process through
- either read() or mmap().
-
- The image buffer is the third scheme, in which frames are decompressed
- and converted into planar format. For mmap() there is more than
- one image buffer available.
-
- The frame buffers provide the image buffering. In case the user process
- is a bit slow, this introduces lag and some undesired side-effects.
- The problem arises when the frame buffer is full. I used to drop the last
- frame, which makes the data in the queue stale very quickly. But dropping
- the frame at the head of the queue proved to be a litte bit more difficult.
- I tried a circular linked scheme, but this introduced more problems than
- it solved.
-
- Because filling and draining are completely asynchronous processes, this
- requires some fiddling with pointers and mutexes.
-
- Eventually, I came up with a system with 2 lists: an 'empty' frame list
- and a 'full' frame list:
- * Initially, all frame buffers but one are on the 'empty' list; the one
- remaining buffer is our initial fill frame.
- * If a frame is needed for filling, we try to take it from the 'empty'
- list, unless that list is empty, in which case we take the buffer at
- the head of the 'full' list.
- * When our fill buffer has been filled, it is appended to the 'full'
- list.
- * If a frame is needed by read() or mmap(), it is taken from the head of
- the 'full' list, handled, and then appended to the 'empty' list. If no
- buffer is present on the 'full' list, we wait.
- The advantage is that the buffer that is currently being decompressed/
- converted, is on neither list, and thus not in our way (any other scheme
- I tried had the problem of old data lingering in the queue).
-
- Whatever strategy you choose, it always remains a tradeoff: with more
- frame buffers the chances of a missed frame are reduced. On the other
- hand, on slower machines it introduces lag because the queue will
- always be full.
- */
-
-/**
- \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first.
- */
-static inline int pwc_next_fill_frame(struct pwc_device *pdev)
-{
- int ret;
- unsigned long flags;
-
- ret = 0;
- spin_lock_irqsave(&pdev->ptrlock, flags);
- if (pdev->fill_frame != NULL) {
- /* append to 'full' list */
- if (pdev->full_frames == NULL) {
- pdev->full_frames = pdev->fill_frame;
- pdev->full_frames_tail = pdev->full_frames;
- }
- else {
- pdev->full_frames_tail->next = pdev->fill_frame;
- pdev->full_frames_tail = pdev->fill_frame;
- }
- }
- if (pdev->empty_frames != NULL) {
- /* We have empty frames available. That's easy */
- pdev->fill_frame = pdev->empty_frames;
- pdev->empty_frames = pdev->empty_frames->next;
- }
- else {
- /* Hmm. Take it from the full list */
-#if PWC_DEBUG
- /* sanity check */
- if (pdev->full_frames == NULL) {
- Err("Neither empty or full frames available!\n");
- spin_unlock_irqrestore(&pdev->ptrlock, flags);
- return -EINVAL;
- }
-#endif
- pdev->fill_frame = pdev->full_frames;
- pdev->full_frames = pdev->full_frames->next;
- ret = 1;
- }
- pdev->fill_frame->next = NULL;
-#if PWC_DEBUG
- Trace(TRACE_SEQUENCE, "Assigning sequence number %d.\n", pdev->sequence);
- pdev->fill_frame->sequence = pdev->sequence++;
-#endif
- spin_unlock_irqrestore(&pdev->ptrlock, flags);
- return ret;
-}
-
-
-/**
- \brief Reset all buffers, pointers and lists, except for the image_used[] buffer.
-
- If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble.
- */
-static void pwc_reset_buffers(struct pwc_device *pdev)
-{
- int i;
- unsigned long flags;
-
- spin_lock_irqsave(&pdev->ptrlock, flags);
- pdev->full_frames = NULL;
- pdev->full_frames_tail = NULL;
- for (i = 0; i < default_fbufs; i++) {
- pdev->fbuf[i].filled = 0;
- if (i > 0)
- pdev->fbuf[i].next = &pdev->fbuf[i - 1];
- else
- pdev->fbuf->next = NULL;
- }
- pdev->empty_frames = &pdev->fbuf[default_fbufs - 1];
- pdev->empty_frames_tail = pdev->fbuf;
- pdev->read_frame = NULL;
- pdev->fill_frame = pdev->empty_frames;
- pdev->empty_frames = pdev->empty_frames->next;
-
- pdev->image_read_pos = 0;
- pdev->fill_image = 0;
- spin_unlock_irqrestore(&pdev->ptrlock, flags);
-}
-
-
-/**
- \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers.
- */
-static int pwc_handle_frame(struct pwc_device *pdev)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&pdev->ptrlock, flags);
- /* First grab our read_frame; this is removed from all lists, so
- we can release the lock after this without problems */
- if (pdev->read_frame != NULL) {
- /* This can't theoretically happen */
- Err("Huh? Read frame still in use?\n");
- }
- else {
- if (pdev->full_frames == NULL) {
- Err("Woops. No frames ready.\n");
- }
- else {
- pdev->read_frame = pdev->full_frames;
- pdev->full_frames = pdev->full_frames->next;
- pdev->read_frame->next = NULL;
- }
-
- if (pdev->read_frame != NULL) {
-#if PWC_DEBUG
- Trace(TRACE_SEQUENCE, "Decompressing frame %d\n", pdev->read_frame->sequence);
-#endif
- /* We're done with read_buffer, tack it to the end of the empty buffer list */
- if (pdev->empty_frames == NULL) {
- pdev->empty_frames = pdev->read_frame;
- pdev->empty_frames_tail = pdev->empty_frames;
- }
- else {
- pdev->empty_frames_tail->next = pdev->read_frame;
- pdev->empty_frames_tail = pdev->read_frame;
- }
- pdev->read_frame = NULL;
- }
- }
- spin_unlock_irqrestore(&pdev->ptrlock, flags);
- return ret;
-}
-
-/**
- \brief Advance pointers of image buffer (after each user request)
-*/
-static inline void pwc_next_image(struct pwc_device *pdev)
-{
- pdev->image_used[pdev->fill_image] = 0;
- pdev->fill_image = (pdev->fill_image + 1) % default_mbufs;
-}
-
-
-/* This gets called for the Isochronous pipe (video). This is done in
- * interrupt time, so it has to be fast, not crash, and not stall. Neat.
- */
-static void pwc_isoc_handler(struct urb *urb, struct pt_regs *regs)
-{
- struct pwc_device *pdev;
- int i, fst, flen;
- int awake;
- struct pwc_frame_buf *fbuf;
- unsigned char *fillptr = NULL;
- unsigned char *iso_buf = NULL;
-
- awake = 0;
- pdev = (struct pwc_device *)urb->context;
- if (pdev == NULL) {
- Err("isoc_handler() called with NULL device?!\n");
- return;
- }
-#ifdef PWC_MAGIC
- if (pdev->magic != PWC_MAGIC) {
- Err("isoc_handler() called with bad magic!\n");
- return;
- }
-#endif
- if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
- Trace(TRACE_OPEN, "pwc_isoc_handler(): URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a");
- return;
- }
- if (urb->status != -EINPROGRESS && urb->status != 0) {
- const char *errmsg;
-
- errmsg = "Unknown";
- switch(urb->status) {
- case -ENOSR: errmsg = "Buffer error (overrun)"; break;
- case -EPIPE: errmsg = "Stalled (device not responding)"; break;
- case -EOVERFLOW: errmsg = "Babble (bad cable?)"; break;
- case -EPROTO: errmsg = "Bit-stuff error (bad cable?)"; break;
- case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break;
- case -ETIMEDOUT: errmsg = "NAK (device does not respond)"; break;
- }
- Trace(TRACE_FLOW, "pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg);
- /* Give up after a number of contiguous errors on the USB bus.
- Appearantly something is wrong so we simulate an unplug event.
- */
- if (++pdev->visoc_errors > MAX_ISOC_ERRORS)
- {
- Info("Too many ISOC errors, bailing out.\n");
- pdev->error_status = EIO;
- awake = 1;
- wake_up_interruptible(&pdev->frameq);
- }
- goto handler_end; // ugly, but practical
- }
-
- fbuf = pdev->fill_frame;
- if (fbuf == NULL) {
- Err("pwc_isoc_handler without valid fill frame.\n");
- awake = 1;
- goto handler_end;
- }
- else {
- fillptr = fbuf->data + fbuf->filled;
- }
-
- /* Reset ISOC error counter. We did get here, after all. */
- pdev->visoc_errors = 0;
-
- /* vsync: 0 = don't copy data
- 1 = sync-hunt
- 2 = synched
- */
- /* Compact data */
- for (i = 0; i < urb->number_of_packets; i++) {
- fst = urb->iso_frame_desc[i].status;
- flen = urb->iso_frame_desc[i].actual_length;
- iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
- if (fst == 0) {
- if (flen > 0) { /* if valid data... */
- if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */
- pdev->vsync = 2;
-
- /* ...copy data to frame buffer, if possible */
- if (flen + fbuf->filled > pdev->frame_total_size) {
- Trace(TRACE_FLOW, "Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size);
- pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */
- pdev->vframes_error++;
- }
- else {
- memmove(fillptr, iso_buf, flen);
- fillptr += flen;
- }
- }
- fbuf->filled += flen;
- } /* ..flen > 0 */
-
- if (flen < pdev->vlast_packet_size) {
- /* Shorter packet... We probably have the end of an image-frame;
- wake up read() process and let select()/poll() do something.
- Decompression is done in user time over there.
- */
- if (pdev->vsync == 2) {
- /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus
- frames on the USB wire after an exposure change. This conditition is
- however detected in the cam and a bit is set in the header.
- */
- if (pdev->type == 730) {
- unsigned char *ptr = (unsigned char *)fbuf->data;
-
- if (ptr[1] == 1 && ptr[0] & 0x10) {
-#if PWC_DEBUG
- Debug("Hyundai CMOS sensor bug. Dropping frame %d.\n", fbuf->sequence);
-#endif
- pdev->drop_frames += 2;
- pdev->vframes_error++;
- }
- if ((ptr[0] ^ pdev->vmirror) & 0x01) {
- if (ptr[0] & 0x01)
- Info("Snapshot button pressed.\n");
- else
- Info("Snapshot button released.\n");
- }
- if ((ptr[0] ^ pdev->vmirror) & 0x02) {
- if (ptr[0] & 0x02)
- Info("Image is mirrored.\n");
- else
- Info("Image is normal.\n");
- }
- pdev->vmirror = ptr[0] & 0x03;
- /* Sometimes the trailer of the 730 is still sent as a 4 byte packet
- after a short frame; this condition is filtered out specifically. A 4 byte
- frame doesn't make sense anyway.
- So we get either this sequence:
- drop_bit set -> 4 byte frame -> short frame -> good frame
- Or this one:
- drop_bit set -> short frame -> good frame
- So we drop either 3 or 2 frames in all!
- */
- if (fbuf->filled == 4)
- pdev->drop_frames++;
- }
-
- /* In case we were instructed to drop the frame, do so silently.
- The buffer pointers are not updated either (but the counters are reset below).
- */
- if (pdev->drop_frames > 0)
- pdev->drop_frames--;
- else {
- /* Check for underflow first */
- if (fbuf->filled < pdev->frame_total_size) {
- Trace(TRACE_FLOW, "Frame buffer underflow (%d bytes); discarded.\n", fbuf->filled);
- pdev->vframes_error++;
- }
- else {
- /* Send only once per EOF */
- awake = 1; /* delay wake_ups */
-
- /* Find our next frame to fill. This will always succeed, since we
- * nick a frame from either empty or full list, but if we had to
- * take it from the full list, it means a frame got dropped.
- */
- if (pwc_next_fill_frame(pdev)) {
- pdev->vframes_dumped++;
- if ((pdev->vframe_count > FRAME_LOWMARK) && (pwc_trace & TRACE_FLOW)) {
- if (pdev->vframes_dumped < 20)
- Trace(TRACE_FLOW, "Dumping frame %d.\n", pdev->vframe_count);
- if (pdev->vframes_dumped == 20)
- Trace(TRACE_FLOW, "Dumping frame %d (last message).\n", pdev->vframe_count);
- }
- }
- fbuf = pdev->fill_frame;
- }
- } /* !drop_frames */
- pdev->vframe_count++;
- }
- fbuf->filled = 0;
- fillptr = fbuf->data;
- pdev->vsync = 1;
- } /* .. flen < last_packet_size */
- pdev->vlast_packet_size = flen;
- } /* ..status == 0 */
-#if PWC_DEBUG
- /* This is normally not interesting to the user, unless you are really debugging something */
- else {
- static int iso_error = 0;
- iso_error++;
- if (iso_error < 20)
- Trace(TRACE_FLOW, "Iso frame %d of USB has error %d\n", i, fst);
- }
-#endif
- }
-
-handler_end:
- if (awake)
- wake_up_interruptible(&pdev->frameq);
-
- urb->dev = pdev->udev;
- i = usb_submit_urb(urb, GFP_ATOMIC);
- if (i != 0)
- Err("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i);
-}
-
-
-static int pwc_isoc_init(struct pwc_device *pdev)
-{
- struct usb_device *udev;
- struct urb *urb;
- int i, j, ret;
-
- struct usb_interface *intf;
- struct usb_host_interface *idesc = NULL;
-
- if (pdev == NULL)
- return -EFAULT;
- if (pdev->iso_init)
- return 0;
- pdev->vsync = 0;
- udev = pdev->udev;
-
- /* Get the current alternate interface, adjust packet size */
- if (!udev->actconfig)
- return -EFAULT;
- intf = usb_ifnum_to_if(udev, 0);
- if (intf)
- idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
- if (!idesc)
- return -EFAULT;
-
- /* Search video endpoint */
- pdev->vmax_packet_size = -1;
- for (i = 0; i < idesc->desc.bNumEndpoints; i++)
- if ((idesc->endpoint[i].desc.bEndpointAddress & 0xF) == pdev->vendpoint) {
- pdev->vmax_packet_size = idesc->endpoint[i].desc.wMaxPacketSize;
- break;
- }
-
- if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
- Err("Failed to find packet size for video endpoint in current alternate setting.\n");
- return -ENFILE; /* Odd error, that should be noticable */
- }
-
- /* Set alternate interface */
- ret = 0;
- Trace(TRACE_OPEN, "Setting alternate interface %d\n", pdev->valternate);
- ret = usb_set_interface(pdev->udev, 0, pdev->valternate);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < MAX_ISO_BUFS; i++) {
- urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
- if (urb == NULL) {
- Err("Failed to allocate urb %d\n", i);
- ret = -ENOMEM;
- break;
- }
- pdev->sbuf[i].urb = urb;
- Trace(TRACE_MEMORY, "Allocated URB at 0x%p\n", urb);
- }
- if (ret) {
- /* De-allocate in reverse order */
- while (i >= 0) {
- if (pdev->sbuf[i].urb != NULL)
- usb_free_urb(pdev->sbuf[i].urb);
- pdev->sbuf[i].urb = NULL;
- i--;
- }
- return ret;
- }
-
- /* init URB structure */
- for (i = 0; i < MAX_ISO_BUFS; i++) {
- urb = pdev->sbuf[i].urb;
-
- urb->interval = 1; // devik
- urb->dev = udev;
- urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
- urb->transfer_flags = URB_ISO_ASAP;
- urb->transfer_buffer = pdev->sbuf[i].data;
- urb->transfer_buffer_length = ISO_BUFFER_SIZE;
- urb->complete = pwc_isoc_handler;
- urb->context = pdev;
- urb->start_frame = 0;
- urb->number_of_packets = ISO_FRAMES_PER_DESC;
- for (j = 0; j < ISO_FRAMES_PER_DESC; j++) {
- urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE;
- urb->iso_frame_desc[j].length = pdev->vmax_packet_size;
- }
- }
-
- /* link */
- for (i = 0; i < MAX_ISO_BUFS; i++) {
- ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL);
- if (ret)
- Err("isoc_init() submit_urb %d failed with error %d\n", i, ret);
- else
- Trace(TRACE_MEMORY, "URB 0x%p submitted.\n", pdev->sbuf[i].urb);
- }
-
- /* All is done... */
- pdev->iso_init = 1;
- Trace(TRACE_OPEN, "<< pwc_isoc_init()\n");
- return 0;
-}
-
-static void pwc_isoc_cleanup(struct pwc_device *pdev)
-{
- int i;
-
- Trace(TRACE_OPEN, ">> pwc_isoc_cleanup()\n");
- if (pdev == NULL)
- return;
-
- /* Unlinking ISOC buffers one by one */
- for (i = 0; i < MAX_ISO_BUFS; i++) {
- struct urb *urb;
-
- urb = pdev->sbuf[i].urb;
- if (urb != 0) {
- if (pdev->iso_init) {
- Trace(TRACE_MEMORY, "Unlinking URB %p\n", urb);
- usb_unlink_urb(urb);
- }
- Trace(TRACE_MEMORY, "Freeing URB\n");
- usb_free_urb(urb);
- pdev->sbuf[i].urb = NULL;
- }
- }
-
- /* Stop camera, but only if we are sure the camera is still there (unplug
- is signalled by EPIPE)
- */
- if (pdev->error_status && pdev->error_status != EPIPE) {
- Trace(TRACE_OPEN, "Setting alternate interface 0.\n");
- usb_set_interface(pdev->udev, 0, 0);
- }
-
- pdev->iso_init = 0;
- Trace(TRACE_OPEN, "<< pwc_isoc_cleanup()\n");
-}
-
-int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot)
-{
- int ret, start;
-
- /* Stop isoc stuff */
- pwc_isoc_cleanup(pdev);
- /* Reset parameters */
- pwc_reset_buffers(pdev);
- /* Try to set video mode... */
- start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot);
- if (ret) {
- Trace(TRACE_FLOW, "pwc_set_video_mode attempt 1 failed.\n");
- /* That failed... restore old mode (we know that worked) */
- start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
- if (start) {
- Trace(TRACE_FLOW, "pwc_set_video_mode attempt 2 failed.\n");
- }
- }
- if (start == 0)
- {
- if (pwc_isoc_init(pdev) < 0)
- {
- Info("Failed to restart ISOC transfers in pwc_try_video_mode.\n");
- ret = -EAGAIN; /* let's try again, who knows if it works a second time */
- }
- }
- pdev->drop_frames++; /* try to avoid garbage during switch */
- return ret; /* Return original error code */
-}
-
-
-/***************************************************************************/
-/* Video4Linux functions */
-
-static int pwc_video_open(struct inode *inode, struct file *file)
-{
- int i;
- struct video_device *vdev = video_devdata(file);
- struct pwc_device *pdev;
-
- Trace(TRACE_OPEN, ">> video_open called(vdev = 0x%p).\n", vdev);
-
- pdev = (struct pwc_device *)vdev->priv;
- if (pdev == NULL)
- BUG();
- if (pdev->vopen)
- return -EBUSY;
-
- down(&pdev->modlock);
- if (!pdev->usb_init) {
- Trace(TRACE_OPEN, "Doing first time initialization.\n");
- pdev->usb_init = 1;
-
- if (pwc_trace & TRACE_OPEN)
- {
- /* Query sensor type */
- const char *sensor_type = NULL;
- int ret;
-
- ret = pwc_get_cmos_sensor(pdev, &i);
- if (ret >= 0)
- {
- switch(i) {
- case 0x00: sensor_type = "Hyundai CMOS sensor"; break;
- case 0x20: sensor_type = "Sony CCD sensor + TDA8787"; break;
- case 0x2E: sensor_type = "Sony CCD sensor + Exas 98L59"; break;
- case 0x2F: sensor_type = "Sony CCD sensor + ADI 9804"; break;
- case 0x30: sensor_type = "Sharp CCD sensor + TDA8787"; break;
- case 0x3E: sensor_type = "Sharp CCD sensor + Exas 98L59"; break;
- case 0x3F: sensor_type = "Sharp CCD sensor + ADI 9804"; break;
- case 0x40: sensor_type = "UPA 1021 sensor"; break;
- case 0x100: sensor_type = "VGA sensor"; break;
- case 0x101: sensor_type = "PAL MR sensor"; break;
- default: sensor_type = "unknown type of sensor"; break;
- }
- }
- if (sensor_type != NULL)
- Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev->name, sensor_type, i);
- }
- }
-
- /* Turn on camera */
- if (power_save) {
- i = pwc_camera_power(pdev, 1);
- if (i < 0)
- Info("Failed to restore power to the camera! (%d)\n", i);
- }
- /* Set LED on/off time */
- if (pwc_set_leds(pdev, led_on, led_off) < 0)
- Info("Failed to set LED on/off time.\n");
-
- pdev->decompressor = NULL;
- pwc_construct(pdev); /* set min/max sizes correct */
-
- /* So far, so good. Allocate memory. */
- i = pwc_allocate_buffers(pdev);
- if (i < 0) {
- Trace(TRACE_OPEN, "Failed to allocate buffer memory.\n");
- up(&pdev->modlock);
- return i;
- }
-
- /* Reset buffers & parameters */
- pwc_reset_buffers(pdev);
- for (i = 0; i < default_mbufs; i++)
- pdev->image_used[i] = 0;
- pdev->vframe_count = 0;
- pdev->vframes_dumped = 0;
- pdev->vframes_error = 0;
- pdev->visoc_errors = 0;
- pdev->error_status = 0;
-#if PWC_DEBUG
- pdev->sequence = 0;
-#endif
- pwc_construct(pdev); /* set min/max sizes correct */
-
- /* Set some defaults */
- pdev->vsnapshot = 0;
-
- /* Start iso pipe for video; first try the last used video size
- (or the default one); if that fails try QCIF/10 or QSIF/10;
- it that fails too, give up.
- */
- i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0);
- if (i) {
- Trace(TRACE_OPEN, "First attempt at set_video_mode failed.\n");
- if (pdev->type == 730 || pdev->type == 740 || pdev->type == 750)
- i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QSIF].x, pwc_image_sizes[PSZ_QSIF].y, 10, pdev->vcompression, 0);
- else
- i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QCIF].x, pwc_image_sizes[PSZ_QCIF].y, 10, pdev->vcompression, 0);
- }
- if (i) {
- Trace(TRACE_OPEN, "Second attempt at set_video_mode failed.\n");
- up(&pdev->modlock);
- return i;
- }
-
- i = pwc_isoc_init(pdev);
- if (i) {
- Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i);
- up(&pdev->modlock);
- return i;
- }
-
- pdev->vopen++;
- file->private_data = vdev;
- up(&pdev->modlock);
- Trace(TRACE_OPEN, "<< video_open() returns 0.\n");
- return 0;
-}
-
-/* Note that all cleanup is done in the reverse order as in _open */
-static int pwc_video_close(struct inode *inode, struct file *file)
-{
- struct video_device *vdev = file->private_data;
- struct pwc_device *pdev;
- int i;
-
- Trace(TRACE_OPEN, ">> video_close called(vdev = 0x%p).\n", vdev);
-
- pdev = (struct pwc_device *)vdev->priv;
- if (pdev->vopen == 0)
- Info("video_close() called on closed device?\n");
-
- /* Dump statistics, but only if a reasonable amount of frames were
- processed (to prevent endless log-entries in case of snap-shot
- programs)
- */
- if (pdev->vframe_count > 20)
- Info("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error);
-
- pwc_isoc_cleanup(pdev);
- pwc_free_buffers(pdev);
-
- /* Turn off LEDS and power down camera, but only when not unplugged */
- if (pdev->error_status != EPIPE) {
- /* Turn LEDs off */
- if (pwc_set_leds(pdev, 0, 0) < 0)
- Info("Failed to set LED on/off time.\n");
- if (power_save) {
- i = pwc_camera_power(pdev, 0);
- if (i < 0)
- Err("Failed to power down camera (%d)\n", i);
- }
- }
- pdev->vopen = 0;
- Trace(TRACE_OPEN, "<< video_close()\n");
- return 0;
-}
-
-/*
- * FIXME: what about two parallel reads ????
- * ANSWER: Not supported. You can't open the device more than once,
- despite what the V4L1 interface says. First, I don't see
- the need, second there's no mechanism of alerting the
- 2nd/3rd/... process of events like changing image size.
- And I don't see the point of blocking that for the
- 2nd/3rd/... process.
- In multi-threaded environments reading parallel from any
- device is tricky anyhow.
- */
-
-static ssize_t pwc_video_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct video_device *vdev = file->private_data;
- struct pwc_device *pdev;
- int noblock = file->f_flags & O_NONBLOCK;
- DECLARE_WAITQUEUE(wait, current);
- int bytes_to_read;
-
- Trace(TRACE_READ, "video_read(0x%p, %p, %zd) called.\n", vdev, buf, count);
- if (vdev == NULL)
- return -EFAULT;
- pdev = vdev->priv;
- if (pdev == NULL)
- return -EFAULT;
- if (pdev->error_status)
- return -pdev->error_status; /* Something happened, report what. */
-
- /* In case we're doing partial reads, we don't have to wait for a frame */
- if (pdev->image_read_pos == 0) {
- /* Do wait queueing according to the (doc)book */
- add_wait_queue(&pdev->frameq, &wait);
- while (pdev->full_frames == NULL) {
- /* Check for unplugged/etc. here */
- if (pdev->error_status) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -pdev->error_status ;
- }
- if (noblock) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -EWOULDBLOCK;
- }
- if (signal_pending(current)) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -ERESTARTSYS;
- }
- schedule();
- set_current_state(TASK_INTERRUPTIBLE);
- }
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
-
- /* Decompress and release frame */
- if (pwc_handle_frame(pdev))
- return -EFAULT;
- }
-
- Trace(TRACE_READ, "Copying data to user space.\n");
- if (pdev->vpalette == VIDEO_PALETTE_RAW)
- bytes_to_read = pdev->frame_size;
- else
- bytes_to_read = pdev->view.size;
-
- /* copy bytes to user space; we allow for partial reads */
- if (count + pdev->image_read_pos > bytes_to_read)
- count = bytes_to_read - pdev->image_read_pos;
- if (copy_to_user(buf, pdev->image_ptr[pdev->fill_image] + pdev->image_read_pos, count))
- return -EFAULT;
- pdev->image_read_pos += count;
- if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */
- pdev->image_read_pos = 0;
- pwc_next_image(pdev);
- }
- return count;
-}
-
-static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
-{
- struct video_device *vdev = file->private_data;
- struct pwc_device *pdev;
-
- if (vdev == NULL)
- return -EFAULT;
- pdev = vdev->priv;
- if (pdev == NULL)
- return -EFAULT;
-
- poll_wait(file, &pdev->frameq, wait);
- if (pdev->error_status)
- return POLLERR;
- if (pdev->full_frames != NULL) /* we have frames waiting */
- return (POLLIN | POLLRDNORM);
-
- return 0;
-}
-
-static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- struct video_device *vdev = file->private_data;
- struct pwc_device *pdev;
- DECLARE_WAITQUEUE(wait, current);
-
- if (vdev == NULL)
- return -EFAULT;
- pdev = vdev->priv;
- if (pdev == NULL)
- return -EFAULT;
-
- switch (cmd) {
- /* Query cabapilities */
- case VIDIOCGCAP:
- {
- struct video_capability *caps = arg;
-
- strcpy(caps->name, vdev->name);
- caps->type = VID_TYPE_CAPTURE;
- caps->channels = 1;
- caps->audios = 1;
- caps->minwidth = pdev->view_min.x;
- caps->minheight = pdev->view_min.y;
- caps->maxwidth = pdev->view_max.x;
- caps->maxheight = pdev->view_max.y;
- break;
- }
-
- /* Channel functions (simulate 1 channel) */
- case VIDIOCGCHAN:
- {
- struct video_channel *v = arg;
-
- if (v->channel != 0)
- return -EINVAL;
- v->flags = 0;
- v->tuners = 0;
- v->type = VIDEO_TYPE_CAMERA;
- strcpy(v->name, "Webcam");
- return 0;
- }
-
- case VIDIOCSCHAN:
- {
- /* The spec says the argument is an integer, but
- the bttv driver uses a video_channel arg, which
- makes sense becasue it also has the norm flag.
- */
- struct video_channel *v = arg;
- if (v->channel != 0)
- return -EINVAL;
- return 0;
- }
-
-
- /* Picture functions; contrast etc. */
- case VIDIOCGPICT:
- {
- struct video_picture *p = arg;
- int val;
-
- val = pwc_get_brightness(pdev);
- if (val >= 0)
- p->brightness = val;
- else
- p->brightness = 0xffff;
- val = pwc_get_contrast(pdev);
- if (val >= 0)
- p->contrast = val;
- else
- p->contrast = 0xffff;
- /* Gamma, Whiteness, what's the difference? :) */
- val = pwc_get_gamma(pdev);
- if (val >= 0)
- p->whiteness = val;
- else
- p->whiteness = 0xffff;
- val = pwc_get_saturation(pdev);
- if (val >= 0)
- p->colour = val;
- else
- p->colour = 0xffff;
- p->depth = 24;
- p->palette = pdev->vpalette;
- p->hue = 0xFFFF; /* N/A */
- break;
- }
-
- case VIDIOCSPICT:
- {
- struct video_picture *p = arg;
- /*
- * FIXME: Suppose we are mid read
- ANSWER: No problem: the firmware of the camera
- can handle brightness/contrast/etc
- changes at _any_ time, and the palette
- is used exactly once in the uncompress
- routine.
- */
- pwc_set_brightness(pdev, p->brightness);
- pwc_set_contrast(pdev, p->contrast);
- pwc_set_gamma(pdev, p->whiteness);
- pwc_set_saturation(pdev, p->colour);
- if (p->palette && p->palette != pdev->vpalette) {
- switch (p->palette) {
- case VIDEO_PALETTE_YUV420P:
- case VIDEO_PALETTE_RAW:
- pdev->vpalette = p->palette;
- return pwc_try_video_mode(pdev, pdev->image.x, pdev->image.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
- break;
- default:
- return -EINVAL;
- break;
- }
- }
- break;
- }
-
- /* Window/size parameters */
- case VIDIOCGWIN:
- {
- struct video_window *vw = arg;
-
- vw->x = 0;
- vw->y = 0;
- vw->width = pdev->view.x;
- vw->height = pdev->view.y;
- vw->chromakey = 0;
- vw->flags = (pdev->vframes << PWC_FPS_SHIFT) |
- (pdev->vsnapshot ? PWC_FPS_SNAPSHOT : 0);
- break;
- }
-
- case VIDIOCSWIN:
- {
- struct video_window *vw = arg;
- int fps, snapshot, ret;
-
- fps = (vw->flags & PWC_FPS_FRMASK) >> PWC_FPS_SHIFT;
- snapshot = vw->flags & PWC_FPS_SNAPSHOT;
- if (fps == 0)
- fps = pdev->vframes;
- if (pdev->view.x == vw->width && pdev->view.y && fps == pdev->vframes && snapshot == pdev->vsnapshot)
- return 0;
- ret = pwc_try_video_mode(pdev, vw->width, vw->height, fps, pdev->vcompression, snapshot);
- if (ret)
- return ret;
- break;
- }
-
- /* We don't have overlay support (yet) */
- case VIDIOCGFBUF:
- {
- struct video_buffer *vb = arg;
-
- memset(vb,0,sizeof(*vb));
- break;
- }
-
- /* mmap() functions */
- case VIDIOCGMBUF:
- {
- /* Tell the user program how much memory is needed for a mmap() */
- struct video_mbuf *vm = arg;
- int i;
-
- memset(vm, 0, sizeof(*vm));
- vm->size = default_mbufs * pdev->len_per_image;
- vm->frames = default_mbufs; /* double buffering should be enough for most applications */
- for (i = 0; i < default_mbufs; i++)
- vm->offsets[i] = i * pdev->len_per_image;
- break;
- }
-
- case VIDIOCMCAPTURE:
- {
- /* Start capture into a given image buffer (called 'frame' in video_mmap structure) */
- struct video_mmap *vm = arg;
-
- Trace(TRACE_READ, "VIDIOCMCAPTURE: %dx%d, frame %d, format %d\n", vm->width, vm->height, vm->frame, vm->format);
- if (vm->frame < 0 || vm->frame >= default_mbufs)
- return -EINVAL;
-
- /* xawtv is nasty. It probes the available palettes
- by setting a very small image size and trying
- various palettes... The driver doesn't support
- such small images, so I'm working around it.
- */
- if (vm->format)
- {
- switch (vm->format)
- {
- case VIDEO_PALETTE_YUV420P:
- case VIDEO_PALETTE_RAW:
- break;
- default:
- return -EINVAL;
- break;
- }
- }
-
- if ((vm->width != pdev->view.x || vm->height != pdev->view.y) &&
- (vm->width >= pdev->view_min.x && vm->height >= pdev->view_min.y)) {
- int ret;
-
- Trace(TRACE_OPEN, "VIDIOCMCAPTURE: changing size to please xawtv :-(.\n");
- ret = pwc_try_video_mode(pdev, vm->width, vm->height, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
- if (ret)
- return ret;
- } /* ... size mismatch */
-
- /* FIXME: should we lock here? */
- if (pdev->image_used[vm->frame])
- return -EBUSY; /* buffer wasn't available. Bummer */
- pdev->image_used[vm->frame] = 1;
-
- /* Okay, we're done here. In the SYNC call we wait until a
- frame comes available, then expand image into the given
- buffer.
- In contrast to the CPiA cam the Philips cams deliver a
- constant stream, almost like a grabber card. Also,
- we have separate buffers for the rawdata and the image,
- meaning we can nearly always expand into the requested buffer.
- */
- Trace(TRACE_READ, "VIDIOCMCAPTURE done.\n");
- break;
- }
-
- case VIDIOCSYNC:
- {
- /* The doc says: "Whenever a buffer is used it should
- call VIDIOCSYNC to free this frame up and continue."
-
- The only odd thing about this whole procedure is
- that MCAPTURE flags the buffer as "in use", and
- SYNC immediately unmarks it, while it isn't
- after SYNC that you know that the buffer actually
- got filled! So you better not start a CAPTURE in
- the same frame immediately (use double buffering).
- This is not a problem for this cam, since it has
- extra intermediate buffers, but a hardware
- grabber card will then overwrite the buffer
- you're working on.
- */
- int *mbuf = arg;
- int ret;
-
- Trace(TRACE_READ, "VIDIOCSYNC called (%d).\n", *mbuf);
-
- /* bounds check */
- if (*mbuf < 0 || *mbuf >= default_mbufs)
- return -EINVAL;
- /* check if this buffer was requested anyway */
- if (pdev->image_used[*mbuf] == 0)
- return -EINVAL;
-
- /* Add ourselves to the frame wait-queue.
-
- FIXME: needs auditing for safety.
- QUESTION: In what respect? I think that using the
- frameq is safe now.
- */
- add_wait_queue(&pdev->frameq, &wait);
- while (pdev->full_frames == NULL) {
- if (pdev->error_status) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -pdev->error_status;
- }
-
- if (signal_pending(current)) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -ERESTARTSYS;
- }
- schedule();
- set_current_state(TASK_INTERRUPTIBLE);
- }
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
-
- /* The frame is ready. Expand in the image buffer
- requested by the user. I don't care if you
- mmap() 5 buffers and request data in this order:
- buffer 4 2 3 0 1 2 3 0 4 3 1 . . .
- Grabber hardware may not be so forgiving.
- */
- Trace(TRACE_READ, "VIDIOCSYNC: frame ready.\n");
- pdev->fill_image = *mbuf; /* tell in which buffer we want the image to be expanded */
- /* Decompress, etc */
- ret = pwc_handle_frame(pdev);
- pdev->image_used[*mbuf] = 0;
- if (ret)
- return -EFAULT;
- break;
- }
-
- case VIDIOCGAUDIO:
- {
- struct video_audio *v = arg;
-
- strcpy(v->name, "Microphone");
- v->audio = -1; /* unknown audio minor */
- v->flags = 0;
- v->mode = VIDEO_SOUND_MONO;
- v->volume = 0;
- v->bass = 0;
- v->treble = 0;
- v->balance = 0x8000;
- v->step = 1;
- break;
- }
-
- case VIDIOCSAUDIO:
- {
- /* Dummy: nothing can be set */
- break;
- }
-
- case VIDIOCGUNIT:
- {
- struct video_unit *vu = arg;
-
- vu->video = pdev->vdev->minor & 0x3F;
- vu->audio = -1; /* not known yet */
- vu->vbi = -1;
- vu->radio = -1;
- vu->teletext = -1;
- break;
- }
- default:
- return pwc_ioctl(pdev, cmd, arg);
- } /* ..switch */
- return 0;
-}
-
-static int pwc_video_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(inode, file, cmd, arg, pwc_video_do_ioctl);
-}
-
-
-static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct video_device *vdev = file->private_data;
- struct pwc_device *pdev;
- unsigned long start = vma->vm_start;
- unsigned long size = vma->vm_end-vma->vm_start;
- unsigned long page, pos;
-
- Trace(TRACE_MEMORY, "mmap(0x%p, 0x%lx, %lu) called.\n", vdev, start, size);
- pdev = vdev->priv;
-
- pos = (unsigned long)pdev->image_data;
- while (size > 0) {
- page = kvirt_to_pa(pos);
- if (remap_page_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
- return -EAGAIN;
-
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- if (size > PAGE_SIZE)
- size -= PAGE_SIZE;
- else
- size = 0;
- }
-
- return 0;
-}
-
-/***************************************************************************/
-/* USB functions */
-
-/* This function gets called when a new device is plugged in or the usb core
- * is loaded.
- */
-
-static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct pwc_device *pdev = NULL;
- int vendor_id, product_id, type_id;
- int i, hint;
- int features = 0;
- int video_nr = -1; /* default: use next available device */
- char serial_number[30], *name;
-
- /* Check if we can handle this device */
- Trace(TRACE_PROBE, "probe() called [%04X %04X], if %d\n",
- udev->descriptor.idVendor, udev->descriptor.idProduct,
- intf->altsetting->desc.bInterfaceNumber);
-
- /* the interfaces are probed one by one. We are only interested in the
- video interface (0) now.
- Interface 1 is the Audio Control, and interface 2 Audio itself.
- */
- if (intf->altsetting->desc.bInterfaceNumber > 0)
- return -ENODEV;
-
- vendor_id = udev->descriptor.idVendor;
- product_id = udev->descriptor.idProduct;
-
- if (vendor_id == 0x0471) {
- switch (product_id) {
- case 0x0302:
- Info("Philips PCA645VC USB webcam detected.\n");
- name = "Philips 645 webcam";
- type_id = 645;
- break;
- case 0x0303:
- Info("Philips PCA646VC USB webcam detected.\n");
- name = "Philips 646 webcam";
- type_id = 646;
- break;
- case 0x0304:
- Info("Askey VC010 type 2 USB webcam detected.\n");
- name = "Askey VC010 webcam";
- type_id = 646;
- break;
- case 0x0307:
- Info("Philips PCVC675K (Vesta) USB webcam detected.\n");
- name = "Philips 675 webcam";
- type_id = 675;
- break;
- case 0x0308:
- Info("Philips PCVC680K (Vesta Pro) USB webcam detected.\n");
- name = "Philips 680 webcam";
- type_id = 680;
- break;
- case 0x030C:
- Info("Philips PCVC690K (Vesta Pro Scan) USB webcam detected.\n");
- name = "Philips 690 webcam";
- type_id = 690;
- break;
- case 0x0310:
- Info("Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected.\n");
- name = "Philips 730 webcam";
- type_id = 730;
- break;
- case 0x0311:
- Info("Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.\n");
- name = "Philips 740 webcam";
- type_id = 740;
- break;
- case 0x0312:
- Info("Philips PCVC750K (ToUCam Pro Scan) USB webcam detected.\n");
- name = "Philips 750 webcam";
- type_id = 750;
- break;
- case 0x0313:
- Info("Philips PCVC720K/40 (ToUCam XS) USB webcam detected.\n");
- name = "Philips 720K/40 webcam";
- type_id = 720;
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x069A) {
- switch(product_id) {
- case 0x0001:
- Info("Askey VC010 type 1 USB webcam detected.\n");
- name = "Askey VC010 webcam";
- type_id = 645;
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x046d) {
- switch(product_id) {
- case 0x08b0:
- Info("Logitech QuickCam Pro 3000 USB webcam detected.\n");
- name = "Logitech QuickCam Pro 3000";
- type_id = 740; /* CCD sensor */
- break;
- case 0x08b1:
- Info("Logitech QuickCam Notebook Pro USB webcam detected.\n");
- name = "Logitech QuickCam Notebook Pro";
- type_id = 740; /* CCD sensor */
- break;
- case 0x08b2:
- Info("Logitech QuickCam 4000 Pro USB webcam detected.\n");
- name = "Logitech QuickCam Pro 4000";
- type_id = 740; /* CCD sensor */
- break;
- case 0x08b3:
- Info("Logitech QuickCam Zoom USB webcam detected.\n");
- name = "Logitech QuickCam Zoom";
- type_id = 740; /* CCD sensor */
- break;
- case 0x08B4:
- Info("Logitech QuickCam Zoom (new model) USB webcam detected.\n");
- name = "Logitech QuickCam Zoom";
- type_id = 740; /* CCD sensor */
- break;
- case 0x08b5:
- Info("Logitech QuickCam Orbit/Sphere USB webcam detected.\n");
- name = "Logitech QuickCam Orbit";
- type_id = 740; /* CCD sensor */
- features |= FEATURE_MOTOR_PANTILT;
- break;
- case 0x08b6:
- case 0x08b7:
- case 0x08b8:
- Info("Logitech QuickCam detected (reserved ID).\n");
- name = "Logitech QuickCam (res.)";
- type_id = 730; /* Assuming CMOS */
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x055d) {
- /* I don't know the difference between the C10 and the C30;
- I suppose the difference is the sensor, but both cameras
- work equally well with a type_id of 675
- */
- switch(product_id) {
- case 0x9000:
- Info("Samsung MPC-C10 USB webcam detected.\n");
- name = "Samsung MPC-C10";
- type_id = 675;
- break;
- case 0x9001:
- Info("Samsung MPC-C30 USB webcam detected.\n");
- name = "Samsung MPC-C30";
- type_id = 675;
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x041e) {
- switch(product_id) {
- case 0x400c:
- Info("Creative Labs Webcam 5 detected.\n");
- name = "Creative Labs Webcam 5";
- type_id = 730;
- break;
- case 0x4011:
- Info("Creative Labs Webcam Pro Ex detected.\n");
- name = "Creative Labs Webcam Pro Ex";
- type_id = 740;
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x04cc) {
- switch(product_id) {
- case 0x8116:
- Info("Sotec Afina Eye USB webcam detected.\n");
- name = "Sotec Afina Eye";
- type_id = 730;
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x06be) {
- switch(product_id) {
- case 0x8116:
- /* Basicly the same as the Sotec Afina Eye */
- Info("AME CU-001 USB webcam detected.\n");
- name = "AME CU-001";
- type_id = 730;
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else if (vendor_id == 0x06be) {
- switch(product_id) {
- case 0x8116:
- /* This is essentially the same cam as the Sotec Afina Eye */
- Info("AME Co. Afina Eye USB webcam detected.\n");
- name = "AME Co. Afina Eye";
- type_id = 750;
- break;
- default:
- return -ENODEV;
- break;
- }
-
- }
- else if (vendor_id == 0x0d81) {
- switch(product_id) {
- case 0x1900:
- Info("Visionite VCS-UC300 USB webcam detected.\n");
- name = "Visionite VCS-UC300";
- type_id = 740; /* CCD sensor */
- break;
- case 0x1910:
- Info("Visionite VCS-UM100 USB webcam detected.\n");
- name = "Visionite VCS-UM100";
- type_id = 730; /* CMOS sensor */
- break;
- default:
- return -ENODEV;
- break;
- }
- }
- else
- return -ENODEV; /* Not any of the know types; but the list keeps growing. */
-
- memset(serial_number, 0, 30);
- usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29);
- Trace(TRACE_PROBE, "Device serial number is %s\n", serial_number);
-
- if (udev->descriptor.bNumConfigurations > 1)
- Info("Warning: more than 1 configuration available.\n");
-
- /* Allocate structure, initialize pointers, mutexes, etc. and link it to the usb_device */
- pdev = kmalloc(sizeof(struct pwc_device), GFP_KERNEL);
- if (pdev == NULL) {
- Err("Oops, could not allocate memory for pwc_device.\n");
- return -ENOMEM;
- }
- memset(pdev, 0, sizeof(struct pwc_device));
- pdev->type = type_id;
- pdev->vsize = default_size;
- pdev->vframes = default_fps;
- strcpy(pdev->serial, serial_number);
- pdev->features = features;
- if (vendor_id == 0x046D && product_id == 0x08B5)
- {
- /* Logitech QuickCam Orbit
- The ranges have been determined experimentally; they may differ from cam to cam.
- Also, the exact ranges left-right and up-down are different for my cam
- */
- pdev->angle_range.pan_min = -7000;
- pdev->angle_range.pan_max = 7000;
- pdev->angle_range.tilt_min = -3000;
- pdev->angle_range.tilt_max = 2500;
- }
-
- init_MUTEX(&pdev->modlock);
- pdev->ptrlock = SPIN_LOCK_UNLOCKED;
-
- pdev->udev = udev;
- init_waitqueue_head(&pdev->frameq);
- pdev->vcompression = pwc_preferred_compression;
-
- /* Allocate video_device structure */
- pdev->vdev = video_device_alloc();
- if (pdev->vdev == 0)
- {
- Err("Err, cannot allocate video_device struture. Failing probe.");
- kfree(pdev);
- return -ENOMEM;
- }
- memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
- strcpy(pdev->vdev->name, name);
- pdev->vdev->owner = THIS_MODULE;
- video_set_drvdata(pdev->vdev, pdev);
-
- pdev->release = udev->descriptor.bcdDevice;
- Trace(TRACE_PROBE, "Release: %04x\n", pdev->release);
-
- /* Now search device_hint[] table for a match, so we can hint a node number. */
- for (hint = 0; hint < MAX_DEV_HINTS; hint++) {
- if (((device_hint[hint].type == -1) || (device_hint[hint].type == pdev->type)) &&
- (device_hint[hint].pdev == NULL)) {
- /* so far, so good... try serial number */
- if ((device_hint[hint].serial_number[0] == '*') || !strcmp(device_hint[hint].serial_number, serial_number)) {
- /* match! */
- video_nr = device_hint[hint].device_node;
- Trace(TRACE_PROBE, "Found hint, will try to register as /dev/video%d\n", video_nr);
- break;
- }
- }
- }
-
- pdev->vdev->release = video_device_release;
- i = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr);
- if (i < 0) {
- Err("Failed to register as video device (%d).\n", i);
- video_device_release(pdev->vdev); /* Drip... drip... drip... */
- kfree(pdev); /* Oops, no memory leaks please */
- return -EIO;
- }
- else {
- Info("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F);
- }
-
- /* occupy slot */
- if (hint < MAX_DEV_HINTS)
- device_hint[hint].pdev = pdev;
-
- Trace(TRACE_PROBE, "probe() function returning struct at 0x%p.\n", pdev);
- usb_set_intfdata (intf, pdev);
- return 0;
-}
-
-/* The user janked out the cable... */
-static void usb_pwc_disconnect(struct usb_interface *intf)
-{
- struct pwc_device *pdev;
- int hint;
-
- lock_kernel();
- pdev = usb_get_intfdata (intf);
- usb_set_intfdata (intf, NULL);
- if (pdev == NULL) {
- Err("pwc_disconnect() Called without private pointer.\n");
- goto disconnect_out;
- }
- if (pdev->udev == NULL) {
- Err("pwc_disconnect() already called for %p\n", pdev);
- goto disconnect_out;
- }
- if (pdev->udev != interface_to_usbdev(intf)) {
- Err("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n");
- goto disconnect_out;
- }
-#ifdef PWC_MAGIC
- if (pdev->magic != PWC_MAGIC) {
- Err("pwc_disconnect() Magic number failed. Consult your scrolls and try again.\n");
- goto disconnect_out;
- }
-#endif
-
- /* We got unplugged; this is signalled by an EPIPE error code */
- if (pdev->vopen) {
- Info("Disconnected while webcam is in use!\n");
- pdev->error_status = EPIPE;
- }
-
- /* Alert waiting processes */
- wake_up_interruptible(&pdev->frameq);
- /* Wait until device is closed */
- while (pdev->vopen)
- schedule();
- /* Device is now closed, so we can safely unregister it */
- Trace(TRACE_PROBE, "Unregistering video device in disconnect().\n");
- video_unregister_device(pdev->vdev);
-
- /* Free memory (don't set pdev to 0 just yet) */
- kfree(pdev);
-
-disconnect_out:
- /* search device_hint[] table if we occupy a slot, by any chance */
- for (hint = 0; hint < MAX_DEV_HINTS; hint++)
- if (device_hint[hint].pdev == pdev)
- device_hint[hint].pdev = NULL;
-
- unlock_kernel();
-}
-
-
-/* *grunt* We have to do atoi ourselves :-( */
-static int pwc_atoi(const char *s)
-{
- int k = 0;
-
- k = 0;
- while (*s != '\0' && *s >= '0' && *s <= '9') {
- k = 10 * k + (*s - '0');
- s++;
- }
- return k;
-}
-
-
-/*
- * Initialization code & module stuff
- */
-
-static char size[PSZ_MAX];
-static int fps = 0;
-static int fbufs = 0;
-static int mbufs = 0;
-static int trace = -1;
-static int compression = -1;
-static char *dev_hint[MAX_DEV_HINTS] = { };
-
-module_param_string(size, size, PSZ_MAX, 0);
-MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga");
-module_param(fps, int, 0);
-MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30");
-module_param(fbufs, int, 0);
-MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve");
-module_param(mbufs, int, 0);
-MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers");
-module_param(trace, int, 0);
-MODULE_PARM_DESC(trace, "For debugging purposes");
-module_param(power_save, int, 0);
-MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off");
-module_param(compression, int, 0);
-MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)");
-module_param(led_on, int, 0);
-MODULE_PARM_DESC(led_on, "LED on time in milliseconds");
-module_param(led_off, int, 0);
-MODULE_PARM_DESC(led_off, "LED off time in milliseconds");
-/* Commented out, as you should be using udev instead of crud like this... */
-/* MODULE_PARM(dev_hint, "0-20s"); */
-/* MODULE_PARM_DESC(dev_hint, "Device node hints"); */
-
-MODULE_DESCRIPTION("Philips & OEM USB webcam driver");
-MODULE_AUTHOR("Nemosoft Unv. <webcam@smcc.demon.nl>");
-MODULE_LICENSE("GPL");
-
-static int __init usb_pwc_init(void)
-{
- int i, sz;
- char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" };
-
- Info("Philips webcam module version " PWC_VERSION " loaded.\n");
- Info("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n");
- Info("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n");
- Info("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
-
- if (fps) {
- if (fps < 4 || fps > 30) {
- Err("Framerate out of bounds (4-30).\n");
- return -EINVAL;
- }
- default_fps = fps;
- Info("Default framerate set to %d.\n", default_fps);
- }
-
- if (strlen(size)) {
- /* string; try matching with array */
- for (sz = 0; sz < PSZ_MAX; sz++) {
- if (!strcmp(sizenames[sz], size)) { /* Found! */
- default_size = sz;
- break;
- }
- }
- if (sz == PSZ_MAX) {
- Err("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n");
- return -EINVAL;
- }
- Info("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y);
- }
- if (mbufs) {
- if (mbufs < 1 || mbufs > MAX_IMAGES) {
- Err("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES);
- return -EINVAL;
- }
- default_mbufs = mbufs;
- Info("Number of image buffers set to %d.\n", default_mbufs);
- }
- if (fbufs) {
- if (fbufs < 2 || fbufs > MAX_FRAMES) {
- Err("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES);
- return -EINVAL;
- }
- default_fbufs = fbufs;
- Info("Number of frame buffers set to %d.\n", default_fbufs);
- }
- if (trace >= 0) {
- Info("Trace options: 0x%04x\n", trace);
- pwc_trace = trace;
- }
- if (compression >= 0) {
- if (compression > 3) {
- Err("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n");
- return -EINVAL;
- }
- pwc_preferred_compression = compression;
- Info("Preferred compression set to %d.\n", pwc_preferred_compression);
- }
- if (power_save)
- Info("Enabling power save on open/close.\n");
-
- /* Big device node whoopla. Basicly, it allows you to assign a
- device node (/dev/videoX) to a camera, based on its type
- & serial number. The format is [type[.serialnumber]:]node.
-
- Any camera that isn't matched by these rules gets the next
- available free device node.
- */
- for (i = 0; i < MAX_DEV_HINTS; i++) {
- char *s, *colon, *dot;
-
- /* This loop also initializes the array */
- device_hint[i].pdev = NULL;
- s = dev_hint[i];
- if (s != NULL && *s != '\0') {
- device_hint[i].type = -1; /* wildcard */
- strcpy(device_hint[i].serial_number, "*");
-
- /* parse string: chop at ':' & '/' */
- colon = dot = s;
- while (*colon != '\0' && *colon != ':')
- colon++;
- while (*dot != '\0' && *dot != '.')
- dot++;
- /* Few sanity checks */
- if (*dot != '\0' && dot > colon) {
- Err("Malformed camera hint: the colon must be after the dot.\n");
- return -EINVAL;
- }
-
- if (*colon == '\0') {
- /* No colon */
- if (*dot != '\0') {
- Err("Malformed camera hint: no colon + device node given.\n");
- return -EINVAL;
- }
- else {
- /* No type or serial number specified, just a number. */
- device_hint[i].device_node = pwc_atoi(s);
- }
- }
- else {
- /* There's a colon, so we have at least a type and a device node */
- device_hint[i].type = pwc_atoi(s);
- device_hint[i].device_node = pwc_atoi(colon + 1);
- if (*dot != '\0') {
- /* There's a serial number as well */
- int k;
-
- dot++;
- k = 0;
- while (*dot != ':' && k < 29) {
- device_hint[i].serial_number[k++] = *dot;
- dot++;
- }
- device_hint[i].serial_number[k] = '\0';
- }
- }
-#if PWC_DEBUG
- Debug("device_hint[%d]:\n", i);
- Debug(" type : %d\n", device_hint[i].type);
- Debug(" serial# : %s\n", device_hint[i].serial_number);
- Debug(" node : %d\n", device_hint[i].device_node);
-#endif
- }
- else
- device_hint[i].type = 0; /* not filled */
- } /* ..for MAX_DEV_HINTS */
-
- Trace(TRACE_PROBE, "Registering driver at address 0x%p.\n", &pwc_driver);
- return usb_register(&pwc_driver);
-}
-
-static void __exit usb_pwc_exit(void)
-{
- Trace(TRACE_MODULE, "Deregistering driver.\n");
- usb_deregister(&pwc_driver);
- Info("Philips webcam module removed.\n");
-}
-
-module_init(usb_pwc_init);
-module_exit(usb_pwc_exit);
-
+++ /dev/null
-#ifndef PWC_IOCTL_H
-#define PWC_IOCTL_H
-
-/* (C) 2001-2004 Nemosoft Unv. webcam@smcc.demon.nl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-/* This is pwc-ioctl.h belonging to PWC 8.12.1
- It contains structures and defines to communicate from user space
- directly to the driver.
- */
-
-/*
- Changes
- 2001/08/03 Alvarado Added ioctl constants to access methods for
- changing white balance and red/blue gains
- 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE
- 2003/12/13 Nemosft Unv. Some modifications to make interfacing to
- PWCX easier
- */
-
-/* These are private ioctl() commands, specific for the Philips webcams.
- They contain functions not found in other webcams, and settings not
- specified in the Video4Linux API.
-
- The #define names are built up like follows:
- VIDIOC VIDeo IOCtl prefix
- PWC Philps WebCam
- G optional: Get
- S optional: Set
- ... the function
- */
-
-
- /* Enumeration of image sizes */
-#define PSZ_SQCIF 0x00
-#define PSZ_QSIF 0x01
-#define PSZ_QCIF 0x02
-#define PSZ_SIF 0x03
-#define PSZ_CIF 0x04
-#define PSZ_VGA 0x05
-#define PSZ_MAX 6
-
-
-/* The frame rate is encoded in the video_window.flags parameter using
- the upper 16 bits, since some flags are defined nowadays. The following
- defines provide a mask and shift to filter out this value.
-
- In 'Snapshot' mode the camera freezes its automatic exposure and colour
- balance controls.
- */
-#define PWC_FPS_SHIFT 16
-#define PWC_FPS_MASK 0x00FF0000
-#define PWC_FPS_FRMASK 0x003F0000
-#define PWC_FPS_SNAPSHOT 0x00400000
-
-
-/* structure for transfering x & y coordinates */
-struct pwc_coord
-{
- int x, y; /* guess what */
- int size; /* size, or offset */
-};
-
-
-/* Used with VIDIOCPWCPROBE */
-struct pwc_probe
-{
- char name[32];
- int type;
-};
-
-struct pwc_serial
-{
- char serial[30]; /* String with serial number. Contains terminating 0 */
-};
-
-/* pwc_whitebalance.mode values */
-#define PWC_WB_INDOOR 0
-#define PWC_WB_OUTDOOR 1
-#define PWC_WB_FL 2
-#define PWC_WB_MANUAL 3
-#define PWC_WB_AUTO 4
-
-/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
- Set mode to one of the PWC_WB_* values above.
- *red and *blue are the respective gains of these colour components inside
- the camera; range 0..65535
- When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
- otherwise undefined.
- 'read_red' and 'read_blue' are read-only.
-*/
-struct pwc_whitebalance
-{
- int mode;
- int manual_red, manual_blue; /* R/W */
- int read_red, read_blue; /* R/O */
-};
-
-/*
- 'control_speed' and 'control_delay' are used in automatic whitebalance mode,
- and tell the camera how fast it should react to changes in lighting, and
- with how much delay. Valid values are 0..65535.
-*/
-struct pwc_wb_speed
-{
- int control_speed;
- int control_delay;
-
-};
-
-/* Used with VIDIOCPWC[SG]LED */
-struct pwc_leds
-{
- int led_on; /* Led on-time; range = 0..25000 */
- int led_off; /* Led off-time; range = 0..25000 */
-};
-
-/* Image size (used with GREALSIZE) */
-struct pwc_imagesize
-{
- int width;
- int height;
-};
-
-/* Defines and structures for Motorized Pan & Tilt */
-#define PWC_MPT_PAN 0x01
-#define PWC_MPT_TILT 0x02
-#define PWC_MPT_TIMEOUT 0x04 /* for status */
-
-/* Set angles; when absolute != 0, the angle is absolute and the
- driver calculates the relative offset for you. This can only
- be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
- absolute angles.
- */
-struct pwc_mpt_angles
-{
- int absolute; /* write-only */
- int pan; /* degrees * 100 */
- int tilt; /* degress * 100 */
-};
-
-/* Range of angles of the camera, both horizontally and vertically.
- */
-struct pwc_mpt_range
-{
- int pan_min, pan_max; /* degrees * 100 */
- int tilt_min, tilt_max;
-};
-
-struct pwc_mpt_status
-{
- int status;
- int time_pan;
- int time_tilt;
-};
-
-
-/* This is used for out-of-kernel decompression. With it, you can get
- all the necessary information to initialize and use the decompressor
- routines in standalone applications.
- */
-struct pwc_video_command
-{
- int type; /* camera type (645, 675, 730, etc.) */
- int release; /* release number */
-
- int size; /* one of PSZ_* */
- int alternate;
- int command_len; /* length of USB video command */
- unsigned char command_buf[13]; /* Actual USB video command */
- int bandlength; /* >0 = compressed */
- int frame_size; /* Size of one (un)compressed frame */
-};
-
-/* Flags for PWCX subroutines. Not all modules honour all flags. */
-#define PWCX_FLAG_PLANAR 0x0001
-#define PWCX_FLAG_BAYER 0x0008
-
-
-/* IOCTL definitions */
-
- /* Restore user settings */
-#define VIDIOCPWCRUSER _IO('v', 192)
- /* Save user settings */
-#define VIDIOCPWCSUSER _IO('v', 193)
- /* Restore factory settings */
-#define VIDIOCPWCFACTORY _IO('v', 194)
-
- /* You can manipulate the compression factor. A compression preference of 0
- means use uncompressed modes when available; 1 is low compression, 2 is
- medium and 3 is high compression preferred. Of course, the higher the
- compression, the lower the bandwidth used but more chance of artefacts
- in the image. The driver automatically chooses a higher compression when
- the preferred mode is not available.
- */
- /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */
-#define VIDIOCPWCSCQUAL _IOW('v', 195, int)
- /* Get preferred compression quality */
-#define VIDIOCPWCGCQUAL _IOR('v', 195, int)
-
-
-/* Retrieve serial number of camera */
-#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial)
-
- /* This is a probe function; since so many devices are supported, it
- becomes difficult to include all the names in programs that want to
- check for the enhanced Philips stuff. So in stead, try this PROBE;
- it returns a structure with the original name, and the corresponding
- Philips type.
- To use, fill the structure with zeroes, call PROBE and if that succeeds,
- compare the name with that returned from VIDIOCGCAP; they should be the
- same. If so, you can be assured it is a Philips (OEM) cam and the type
- is valid.
- */
-#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe)
-
- /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
-#define VIDIOCPWCSAGC _IOW('v', 200, int)
- /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCGAGC _IOR('v', 200, int)
- /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCSSHUTTER _IOW('v', 201, int)
-
- /* Color compensation (Auto White Balance) */
-#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance)
-#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance)
-
- /* Auto WB speed */
-#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed)
-#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed)
-
- /* LEDs on/off/blink; int range 0..65535 */
-#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds)
-#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds)
-
- /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
-#define VIDIOCPWCSCONTOUR _IOW('v', 206, int)
-#define VIDIOCPWCGCONTOUR _IOR('v', 206, int)
-
- /* Backlight compensation; 0 = off, otherwise on */
-#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int)
-#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int)
-
- /* Flickerless mode; = 0 off, otherwise on */
-#define VIDIOCPWCSFLICKER _IOW('v', 208, int)
-#define VIDIOCPWCGFLICKER _IOR('v', 208, int)
-
- /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
-#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int)
-#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int)
-
- /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
-#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize)
-
- /* Motorized pan & tilt functions */
-#define VIDIOCPWCMPTRESET _IOW('v', 211, int)
-#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range)
-#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status)
-
- /* Get the USB set-video command; needed for initializing libpwcx */
-#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command)
-
-#endif
+++ /dev/null
-/* Linux driver for Philips webcam
- Various miscellaneous functions and tables.
- (C) 1999-2003 Nemosoft Unv. (webcam@smcc.demon.nl)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/slab.h>
-
-#include "pwc.h"
-
-struct pwc_coord pwc_image_sizes[PSZ_MAX] =
-{
- { 128, 96, 0 },
- { 160, 120, 0 },
- { 176, 144, 0 },
- { 320, 240, 0 },
- { 352, 288, 0 },
- { 640, 480, 0 },
-};
-
-/* x,y -> PSZ_ */
-int pwc_decode_size(struct pwc_device *pdev, int width, int height)
-{
- int i, find;
-
- /* Make sure we don't go beyond our max size.
- NB: we have different limits for RAW and normal modes. In case
- you don't have the decompressor loaded or use RAW mode,
- the maximum viewable size is smaller.
- */
- if (pdev->vpalette == VIDEO_PALETTE_RAW)
- {
- if (width > pdev->abs_max.x || height > pdev->abs_max.y)
- {
- Debug("VIDEO_PALETTE_RAW: going beyond abs_max.\n");
- return -1;
- }
- }
- else
- {
- if (width > pdev->view_max.x || height > pdev->view_max.y)
- {
- Debug("VIDEO_PALETTE_ not RAW: going beyond view_max.\n");
- return -1;
- }
- }
-
- /* Find the largest size supported by the camera that fits into the
- requested size.
- */
- find = -1;
- for (i = 0; i < PSZ_MAX; i++) {
- if (pdev->image_mask & (1 << i)) {
- if (pwc_image_sizes[i].x <= width && pwc_image_sizes[i].y <= height)
- find = i;
- }
- }
- return find;
-}
-
-/* initialize variables depending on type and decompressor*/
-void pwc_construct(struct pwc_device *pdev)
-{
- switch(pdev->type) {
- case 645:
- case 646:
- pdev->view_min.x = 128;
- pdev->view_min.y = 96;
- pdev->view_max.x = 352;
- pdev->view_max.y = 288;
- pdev->abs_max.x = 352;
- pdev->abs_max.y = 288;
- pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QCIF | 1 << PSZ_CIF;
- pdev->vcinterface = 2;
- pdev->vendpoint = 4;
- pdev->frame_header_size = 0;
- pdev->frame_trailer_size = 0;
- break;
- case 675:
- case 680:
- case 690:
- pdev->view_min.x = 128;
- pdev->view_min.y = 96;
- /* Anthill bug #38: PWC always reports max size, even without PWCX */
- if (pdev->decompressor != NULL) {
- pdev->view_max.x = 640;
- pdev->view_max.y = 480;
- }
- else {
- pdev->view_max.x = 352;
- pdev->view_max.y = 288;
- }
- pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA;
- pdev->abs_max.x = 640;
- pdev->abs_max.y = 480;
- pdev->vcinterface = 3;
- pdev->vendpoint = 4;
- pdev->frame_header_size = 0;
- pdev->frame_trailer_size = 0;
- break;
- case 720:
- case 730:
- case 740:
- case 750:
- pdev->view_min.x = 160;
- pdev->view_min.y = 120;
- /* Anthill bug #38: PWC always reports max size, even without PWCX */
- if (pdev->decompressor != NULL) {
- pdev->view_max.x = 640;
- pdev->view_max.y = 480;
- }
- else {
- /* We use CIF, not SIF since some tools really need CIF. So we cheat a bit. */
- pdev->view_max.x = 352;
- pdev->view_max.y = 288;
- }
- pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA;
- pdev->abs_max.x = 640;
- pdev->abs_max.y = 480;
- pdev->vcinterface = 3;
- pdev->vendpoint = 5;
- pdev->frame_header_size = TOUCAM_HEADER_SIZE;
- pdev->frame_trailer_size = TOUCAM_TRAILER_SIZE;
- break;
- }
- pdev->vpalette = VIDEO_PALETTE_YUV420P; /* default */
- pdev->view_min.size = pdev->view_min.x * pdev->view_min.y;
- pdev->view_max.size = pdev->view_max.x * pdev->view_max.y;
- /* length of image, in YUV format; always allocate enough memory. */
- pdev->len_per_image = (pdev->abs_max.x * pdev->abs_max.y * 3) / 2;
-}
-
-
+++ /dev/null
-/* (C) 1999-2003 Nemosoft Unv. (webcam@smcc.demon.nl)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#ifndef PWC_H
-#define PWC_H
-
-#include <linux/version.h>
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/spinlock.h>
-#include <linux/videodev.h>
-#include <linux/wait.h>
-#include <linux/smp_lock.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-#include "pwc-ioctl.h"
-
-/* Defines and structures for the Philips webcam */
-/* Used for checking memory corruption/pointer validation */
-#define PWC_MAGIC 0x89DC10ABUL
-#undef PWC_MAGIC
-
-/* Turn some debugging options on/off */
-#define PWC_DEBUG 0
-
-/* Trace certain actions in the driver */
-#define TRACE_MODULE 0x0001
-#define TRACE_PROBE 0x0002
-#define TRACE_OPEN 0x0004
-#define TRACE_READ 0x0008
-#define TRACE_MEMORY 0x0010
-#define TRACE_FLOW 0x0020
-#define TRACE_SIZE 0x0040
-#define TRACE_PWCX 0x0080
-#define TRACE_SEQUENCE 0x1000
-
-#define Trace(R, A...) if (pwc_trace & R) printk(KERN_DEBUG PWC_NAME " " A)
-#define Debug(A...) printk(KERN_DEBUG PWC_NAME " " A)
-#define Info(A...) printk(KERN_INFO PWC_NAME " " A)
-#define Err(A...) printk(KERN_ERR PWC_NAME " " A)
-
-
-/* Defines for ToUCam cameras */
-#define TOUCAM_HEADER_SIZE 8
-#define TOUCAM_TRAILER_SIZE 4
-
-#define FEATURE_MOTOR_PANTILT 0x0001
-
-/* Version block */
-#define PWC_MAJOR 9
-#define PWC_MINOR 0
-#define PWC_VERSION "9.0.1"
-#define PWC_NAME "pwc"
-
-/* Turn certain features on/off */
-#define PWC_INT_PIPE 0
-
-/* Ignore errors in the first N frames, to allow for startup delays */
-#define FRAME_LOWMARK 5
-
-/* Size and number of buffers for the ISO pipe. */
-#define MAX_ISO_BUFS 2
-#define ISO_FRAMES_PER_DESC 10
-#define ISO_MAX_FRAME_SIZE 960
-#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
-
-/* Frame buffers: contains compressed or uncompressed video data. */
-#define MAX_FRAMES 5
-/* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */
-#define PWC_FRAME_SIZE (460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE)
-
-/* Absolute maximum number of buffers available for mmap() */
-#define MAX_IMAGES 10
-
-/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */
-struct pwc_iso_buf
-{
- void *data;
- int length;
- int read;
- struct urb *urb;
-};
-
-/* intermediate buffers with raw data from the USB cam */
-struct pwc_frame_buf
-{
- void *data;
- volatile int filled; /* number of bytes filled */
- struct pwc_frame_buf *next; /* list */
-#if PWC_DEBUG
- int sequence; /* Sequence number */
-#endif
-};
-
-struct pwc_device
-{
- struct video_device *vdev;
-#ifdef PWC_MAGIC
- int magic;
-#endif
- /* Pointer to our usb_device */
- struct usb_device *udev;
-
- int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
- int release; /* release number */
- int features; /* feature bits */
- char serial[30]; /* serial number (string) */
- int error_status; /* set when something goes wrong with the cam (unplugged, USB errors) */
- int usb_init; /* set when the cam has been initialized over USB */
-
- /*** Video data ***/
- int vopen; /* flag */
- int vendpoint; /* video isoc endpoint */
- int vcinterface; /* video control interface */
- int valternate; /* alternate interface needed */
- int vframes, vsize; /* frames-per-second & size (see PSZ_*) */
- int vpalette; /* palette: 420P, RAW or RGBBAYER */
- int vframe_count; /* received frames */
- int vframes_dumped; /* counter for dumped frames */
- int vframes_error; /* frames received in error */
- int vmax_packet_size; /* USB maxpacket size */
- int vlast_packet_size; /* for frame synchronisation */
- int visoc_errors; /* number of contiguous ISOC errors */
- int vcompression; /* desired compression factor */
- int vbandlength; /* compressed band length; 0 is uncompressed */
- char vsnapshot; /* snapshot mode */
- char vsync; /* used by isoc handler */
- char vmirror; /* for ToUCaM series */
-
- int cmd_len;
- unsigned char cmd_buf[13];
-
- /* The image acquisition requires 3 to 4 steps:
- 1. data is gathered in short packets from the USB controller
- 2. data is synchronized and packed into a frame buffer
- 3a. in case data is compressed, decompress it directly into image buffer
- 3b. in case data is uncompressed, copy into image buffer with viewport
- 4. data is transferred to the user process
-
- Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES....
- We have in effect a back-to-back-double-buffer system.
- */
- /* 1: isoc */
- struct pwc_iso_buf sbuf[MAX_ISO_BUFS];
- char iso_init;
-
- /* 2: frame */
- struct pwc_frame_buf *fbuf; /* all frames */
- struct pwc_frame_buf *empty_frames, *empty_frames_tail; /* all empty frames */
- struct pwc_frame_buf *full_frames, *full_frames_tail; /* all filled frames */
- struct pwc_frame_buf *fill_frame; /* frame currently being filled */
- struct pwc_frame_buf *read_frame; /* frame currently read by user process */
- int frame_header_size, frame_trailer_size;
- int frame_size;
- int frame_total_size; /* including header & trailer */
- int drop_frames;
-#if PWC_DEBUG
- int sequence; /* Debugging aid */
-#endif
-
- /* 3: decompression */
- struct pwc_decompressor *decompressor; /* function block with decompression routines */
- void *decompress_data; /* private data for decompression engine */
-
- /* 4: image */
- /* We have an 'image' and a 'view', where 'image' is the fixed-size image
- as delivered by the camera, and 'view' is the size requested by the
- program. The camera image is centered in this viewport, laced with
- a gray or black border. view_min <= image <= view <= view_max;
- */
- int image_mask; /* bitmask of supported sizes */
- struct pwc_coord view_min, view_max; /* minimum and maximum viewable sizes */
- struct pwc_coord abs_max; /* maximum supported size with compression */
- struct pwc_coord image, view; /* image and viewport size */
- struct pwc_coord offset; /* offset within the viewport */
-
- void *image_data; /* total buffer, which is subdivided into ... */
- void *image_ptr[MAX_IMAGES]; /* ...several images... */
- int fill_image; /* ...which are rotated. */
- int len_per_image; /* length per image */
- int image_read_pos; /* In case we read data in pieces, keep track of were we are in the imagebuffer */
- int image_used[MAX_IMAGES]; /* For MCAPTURE and SYNC */
-
- struct semaphore modlock; /* to prevent races in video_open(), etc */
- spinlock_t ptrlock; /* for manipulating the buffer pointers */
-
- /*** motorized pan/tilt feature */
- struct pwc_mpt_range angle_range;
- int pan_angle; /* in degrees * 100 */
- int tilt_angle; /* absolute angle; 0,0 is home position */
-
- /*** Misc. data ***/
- wait_queue_head_t frameq; /* When waiting for a frame to finish... */
-#if PWC_INT_PIPE
- void *usb_int_handler; /* for the interrupt endpoint */
-#endif
-};
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Global variables */
-extern int pwc_trace;
-extern int pwc_preferred_compression;
-
-/** functions in pwc-if.c */
-int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot);
-
-/** Functions in pwc-misc.c */
-/* sizes in pixels */
-extern struct pwc_coord pwc_image_sizes[PSZ_MAX];
-
-int pwc_decode_size(struct pwc_device *pdev, int width, int height);
-void pwc_construct(struct pwc_device *pdev);
-
-/** Functions in pwc-ctrl.c */
-/* Request a certain video mode. Returns < 0 if not possible */
-extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot);
-/* Calculate the number of bytes per image (not frame) */
-extern void pwc_set_image_buffer_size(struct pwc_device *pdev);
-
-/* Various controls; should be obvious. Value 0..65535, or < 0 on error */
-extern int pwc_get_brightness(struct pwc_device *pdev);
-extern int pwc_set_brightness(struct pwc_device *pdev, int value);
-extern int pwc_get_contrast(struct pwc_device *pdev);
-extern int pwc_set_contrast(struct pwc_device *pdev, int value);
-extern int pwc_get_gamma(struct pwc_device *pdev);
-extern int pwc_set_gamma(struct pwc_device *pdev, int value);
-extern int pwc_get_saturation(struct pwc_device *pdev);
-extern int pwc_set_saturation(struct pwc_device *pdev, int value);
-extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
-extern int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value);
-extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
-
-/* Power down or up the camera; not supported by all models */
-extern int pwc_camera_power(struct pwc_device *pdev, int power);
-
-/* Private ioctl()s; see pwc-ioctl.h */
-extern int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg);
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif
+++ /dev/null
- /* SQCIF */
- {
- /* 5 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 10 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 15 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 20 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 25 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 30 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- },
- /* QSIF */
- {
- /* 5 fps */
- {
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- },
- /* 10 fps */
- {
- {2, 291, 0, {0x1C, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0x01, 0x80}},
- {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
- {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
- {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
- },
- /* 15 fps */
- {
- {3, 437, 0, {0x1B, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x01, 0x80}},
- {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
- {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
- {1, 192, 420, {0x13, 0xF4, 0x30, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
- },
- /* 20 fps */
- {
- {4, 589, 0, {0x1A, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4D, 0x02, 0x80}},
- {3, 448, 730, {0x12, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xC0, 0x01, 0x80}},
- {2, 292, 476, {0x12, 0xF4, 0x30, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0x01, 0x80}},
- {1, 192, 312, {0x12, 0xF4, 0x50, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
- },
- /* 25 fps */
- {
- {5, 703, 0, {0x19, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x02, 0x80}},
- {3, 447, 610, {0x11, 0xF4, 0x30, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x28, 0xBF, 0x01, 0x80}},
- {2, 292, 398, {0x11, 0xF4, 0x50, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x28, 0x24, 0x01, 0x80}},
- {1, 193, 262, {0x11, 0xF4, 0x50, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x28, 0xC1, 0x00, 0x80}},
- },
- /* 30 fps */
- {
- {8, 874, 0, {0x18, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x6A, 0x03, 0x80}},
- {5, 704, 730, {0x10, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x28, 0xC0, 0x02, 0x80}},
- {3, 448, 492, {0x10, 0xF4, 0x30, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x28, 0xC0, 0x01, 0x80}},
- {2, 292, 320, {0x10, 0xF4, 0x50, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x28, 0x24, 0x01, 0x80}},
- },
- },
- /* QCIF */
- {
- /* 5 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 10 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 15 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 20 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 25 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 30 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- },
- /* SIF */
- {
- /* 5 fps */
- {
- {4, 582, 0, {0x0D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x02, 0x80}},
- {3, 387, 1276, {0x05, 0xF4, 0x30, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x01, 0x80}},
- {2, 291, 960, {0x05, 0xF4, 0x30, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0x01, 0x80}},
- {1, 191, 630, {0x05, 0xF4, 0x50, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x18, 0xBF, 0x00, 0x80}},
- },
- /* 10 fps */
- {
- {0, },
- {6, 775, 1278, {0x04, 0xF4, 0x30, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x03, 0x80}},
- {3, 447, 736, {0x04, 0xF4, 0x30, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x28, 0xBF, 0x01, 0x80}},
- {2, 292, 480, {0x04, 0xF4, 0x70, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x28, 0x24, 0x01, 0x80}},
- },
- /* 15 fps */
- {
- {0, },
- {9, 955, 1050, {0x03, 0xF4, 0x30, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x03, 0x80}},
- {4, 592, 650, {0x03, 0xF4, 0x30, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x50, 0x02, 0x80}},
- {3, 448, 492, {0x03, 0xF4, 0x50, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x38, 0xC0, 0x01, 0x80}},
- },
- /* 20 fps */
- {
- {0, },
- {9, 958, 782, {0x02, 0xF4, 0x30, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x03, 0x80}},
- {5, 703, 574, {0x02, 0xF4, 0x50, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x02, 0x80}},
- {3, 446, 364, {0x02, 0xF4, 0x90, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x38, 0xBE, 0x01, 0x80}},
- },
- /* 25 fps */
- {
- {0, },
- {9, 958, 654, {0x01, 0xF4, 0x30, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x03, 0x80}},
- {6, 776, 530, {0x01, 0xF4, 0x50, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x03, 0x80}},
- {4, 592, 404, {0x01, 0xF4, 0x70, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x48, 0x50, 0x02, 0x80}},
- },
- /* 30 fps */
- {
- {0, },
- {9, 957, 526, {0x00, 0xF4, 0x50, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x03, 0x80}},
- {6, 775, 426, {0x00, 0xF4, 0x70, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x03, 0x80}},
- {4, 590, 324, {0x00, 0x7A, 0x88, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x50, 0x4E, 0x02, 0x80}},
- },
- },
- /* CIF */
- {
- /* 5 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 10 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 15 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 20 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 25 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 30 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- },
- /* VGA */
- {
- /* 5 fps */
- {
- {0, },
- {6, 773, 1272, {0x25, 0xF4, 0x30, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}},
- {4, 592, 976, {0x25, 0xF4, 0x50, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x02, 0x80}},
- {3, 448, 738, {0x25, 0xF4, 0x90, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x01, 0x80}},
- },
- /* 10 fps */
- {
- {0, },
- {9, 956, 788, {0x24, 0xF4, 0x70, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x03, 0x80}},
- {6, 776, 640, {0x24, 0xF4, 0xB0, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x03, 0x80}},
- {4, 592, 488, {0x24, 0x7A, 0xE8, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x02, 0x80}},
- },
- /* 15 fps */
- {
- {0, },
- {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
- {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
- {8, 895, 492, {0x23, 0x7A, 0xE8, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x03, 0x80}},
- },
- /* 20 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 25 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 30 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- },
+++ /dev/null
- /* SQCIF */
- {
- {0, 0, {0x04, 0x01, 0x03}},
- {8, 0, {0x05, 0x01, 0x03}},
- {7, 0, {0x08, 0x01, 0x03}},
- {7, 0, {0x0A, 0x01, 0x03}},
- {6, 0, {0x0C, 0x01, 0x03}},
- {5, 0, {0x0F, 0x01, 0x03}},
- {4, 0, {0x14, 0x01, 0x03}},
- {3, 0, {0x18, 0x01, 0x03}},
- },
- /* QSIF */
- {
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- },
- /* QCIF */
- {
- {0, 0, {0x04, 0x01, 0x02}},
- {8, 0, {0x05, 0x01, 0x02}},
- {7, 0, {0x08, 0x01, 0x02}},
- {6, 0, {0x0A, 0x01, 0x02}},
- {5, 0, {0x0C, 0x01, 0x02}},
- {4, 0, {0x0F, 0x01, 0x02}},
- {1, 0, {0x14, 0x01, 0x02}},
- {1, 0, {0x18, 0x01, 0x02}},
- },
- /* SIF */
- {
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- },
- /* CIF */
- {
- {4, 0, {0x04, 0x01, 0x01}},
- {7, 1, {0x05, 0x03, 0x01}},
- {6, 1, {0x08, 0x03, 0x01}},
- {4, 1, {0x0A, 0x03, 0x01}},
- {3, 1, {0x0C, 0x03, 0x01}},
- {2, 1, {0x0F, 0x03, 0x01}},
- {0},
- {0},
- },
- /* VGA */
- {
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- {0},
- },
+++ /dev/null
- /* SQCIF */
- {
- /* 5 fps */
- {
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- },
- /* 10 fps */
- {
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- },
- /* 15 fps */
- {
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- },
- /* 20 fps */
- {
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- },
- /* 25 fps */
- {
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- },
- /* 30 fps */
- {
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- },
- },
- /* QSIF */
- {
- /* 5 fps */
- {
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- },
- /* 10 fps */
- {
- {2, 291, 0, {0x2C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0xA1, 0xC0, 0x02}},
- {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
- {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
- {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
- },
- /* 15 fps */
- {
- {3, 437, 0, {0x2B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x6D, 0xC0, 0x02}},
- {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {1, 191, 420, {0x2B, 0xF4, 0x0D, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
- },
- /* 20 fps */
- {
- {4, 588, 0, {0x2A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4C, 0x52, 0xC0, 0x02}},
- {3, 447, 730, {0x2A, 0xF4, 0x05, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 476, {0x2A, 0xF4, 0x0D, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
- {1, 192, 312, {0x2A, 0xF4, 0x1D, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
- },
- /* 25 fps */
- {
- {5, 703, 0, {0x29, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x42, 0xC0, 0x02}},
- {3, 447, 610, {0x29, 0xF4, 0x05, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 398, {0x29, 0xF4, 0x0D, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
- {1, 192, 262, {0x29, 0xF4, 0x25, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
- },
- /* 30 fps */
- {
- {8, 873, 0, {0x28, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x69, 0x37, 0xC0, 0x02}},
- {5, 704, 774, {0x28, 0xF4, 0x05, 0x18, 0x21, 0x17, 0x59, 0x0F, 0x18, 0xC0, 0x42, 0xC0, 0x02}},
- {3, 448, 492, {0x28, 0xF4, 0x05, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x18, 0xC0, 0x69, 0xC0, 0x02}},
- {2, 291, 320, {0x28, 0xF4, 0x1D, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
- },
- },
- /* QCIF */
- {
- /* 5 fps */
- {
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- },
- /* 10 fps */
- {
- {3, 385, 0, {0x0C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x81, 0x79, 0xC0, 0x02}},
- {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {1, 194, 532, {0x0C, 0xF4, 0x05, 0x10, 0x9A, 0x0F, 0xBE, 0x1B, 0x08, 0xC2, 0xF0, 0xC0, 0x02}},
- },
- /* 15 fps */
- {
- {4, 577, 0, {0x0B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x41, 0x52, 0xC0, 0x02}},
- {3, 447, 818, {0x0B, 0xF4, 0x05, 0x19, 0x89, 0x18, 0xAD, 0x0F, 0x10, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 534, {0x0B, 0xF4, 0x05, 0x10, 0xA3, 0x0F, 0xC7, 0x19, 0x10, 0x24, 0xA1, 0xC0, 0x02}},
- {1, 195, 356, {0x0B, 0xF4, 0x15, 0x0B, 0x11, 0x0A, 0x35, 0x1E, 0x10, 0xC3, 0xF0, 0xC0, 0x02}},
- },
- /* 20 fps */
- {
- {6, 776, 0, {0x0A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x08, 0x3F, 0xC0, 0x02}},
- {4, 591, 804, {0x0A, 0xF4, 0x05, 0x19, 0x1E, 0x18, 0x42, 0x0F, 0x18, 0x4F, 0x4E, 0xC0, 0x02}},
- {3, 447, 608, {0x0A, 0xF4, 0x05, 0x12, 0xFD, 0x12, 0x21, 0x15, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 291, 396, {0x0A, 0xF4, 0x15, 0x0C, 0x5E, 0x0B, 0x82, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
- },
- /* 25 fps */
- {
- {9, 928, 0, {0x09, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xA0, 0x33, 0xC0, 0x02}},
- {5, 703, 800, {0x09, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x10, 0x18, 0xBF, 0x42, 0xC0, 0x02}},
- {3, 447, 508, {0x09, 0xF4, 0x0D, 0x0F, 0xD2, 0x0E, 0xF6, 0x1B, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 332, {0x09, 0xF4, 0x1D, 0x0A, 0x5A, 0x09, 0x7E, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
- },
- /* 30 fps */
- {
- {0, },
- {9, 956, 876, {0x08, 0xF4, 0x05, 0x1B, 0x58, 0x1A, 0x7C, 0x0E, 0x20, 0xBC, 0x33, 0x10, 0x02}},
- {4, 592, 542, {0x08, 0xF4, 0x05, 0x10, 0xE4, 0x10, 0x08, 0x17, 0x20, 0x50, 0x4E, 0x10, 0x02}},
- {2, 291, 266, {0x08, 0xF4, 0x25, 0x08, 0x48, 0x07, 0x6C, 0x1E, 0x20, 0x23, 0xA1, 0x10, 0x02}},
- },
- },
- /* SIF */
- {
- /* 5 fps */
- {
- {4, 582, 0, {0x35, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x52, 0x60, 0x02}},
- {3, 387, 1276, {0x35, 0xF4, 0x05, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x79, 0x60, 0x02}},
- {2, 291, 960, {0x35, 0xF4, 0x0D, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0xA1, 0x60, 0x02}},
- {1, 191, 630, {0x35, 0xF4, 0x1D, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x08, 0xBF, 0xF4, 0x60, 0x02}},
- },
- /* 10 fps */
- {
- {0, },
- {6, 775, 1278, {0x34, 0xF4, 0x05, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x3F, 0x10, 0x02}},
- {3, 447, 736, {0x34, 0xF4, 0x15, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x18, 0xBF, 0x69, 0x10, 0x02}},
- {2, 291, 480, {0x34, 0xF4, 0x2D, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x18, 0x23, 0xA1, 0x10, 0x02}},
- },
- /* 15 fps */
- {
- {0, },
- {9, 955, 1050, {0x33, 0xF4, 0x05, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x33, 0x10, 0x02}},
- {4, 591, 650, {0x33, 0xF4, 0x15, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x4F, 0x4E, 0x10, 0x02}},
- {3, 448, 492, {0x33, 0xF4, 0x25, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x28, 0xC0, 0x69, 0x10, 0x02}},
- },
- /* 20 fps */
- {
- {0, },
- {9, 958, 782, {0x32, 0xF4, 0x0D, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x33, 0xD0, 0x02}},
- {5, 703, 574, {0x32, 0xF4, 0x1D, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x42, 0xD0, 0x02}},
- {3, 446, 364, {0x32, 0xF4, 0x3D, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x30, 0xBE, 0x69, 0xD0, 0x02}},
- },
- /* 25 fps */
- {
- {0, },
- {9, 958, 654, {0x31, 0xF4, 0x15, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x33, 0x90, 0x02}},
- {6, 776, 530, {0x31, 0xF4, 0x25, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x3F, 0x90, 0x02}},
- {4, 592, 404, {0x31, 0xF4, 0x35, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x38, 0x50, 0x4E, 0x90, 0x02}},
- },
- /* 30 fps */
- {
- {0, },
- {9, 957, 526, {0x30, 0xF4, 0x25, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x33, 0x60, 0x02}},
- {6, 775, 426, {0x30, 0xF4, 0x35, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x3F, 0x60, 0x02}},
- {4, 590, 324, {0x30, 0x7A, 0x4B, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x40, 0x4E, 0x52, 0x60, 0x02}},
- },
- },
- /* CIF */
- {
- /* 5 fps */
- {
- {6, 771, 0, {0x15, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x03, 0x3F, 0x80, 0x02}},
- {4, 465, 1278, {0x15, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x03, 0x18, 0xD1, 0x65, 0x80, 0x02}},
- {2, 291, 800, {0x15, 0xF4, 0x15, 0x18, 0xF4, 0x17, 0x3C, 0x05, 0x18, 0x23, 0xA1, 0x80, 0x02}},
- {1, 193, 528, {0x15, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x18, 0xC1, 0xF4, 0x80, 0x02}},
- },
- /* 10 fps */
- {
- {0, },
- {9, 932, 1278, {0x14, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x04, 0x30, 0xA4, 0x33, 0x10, 0x02}},
- {4, 591, 812, {0x14, 0xF4, 0x15, 0x19, 0x56, 0x17, 0x9E, 0x06, 0x28, 0x4F, 0x4E, 0x10, 0x02}},
- {2, 291, 400, {0x14, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x28, 0x23, 0xA1, 0x10, 0x02}},
- },
- /* 15 fps */
- {
- {0, },
- {9, 956, 876, {0x13, 0xF4, 0x0D, 0x1B, 0x58, 0x19, 0xA0, 0x05, 0x38, 0xBC, 0x33, 0x60, 0x02}},
- {5, 703, 644, {0x13, 0xF4, 0x1D, 0x14, 0x1C, 0x12, 0x64, 0x08, 0x38, 0xBF, 0x42, 0x60, 0x02}},
- {3, 448, 410, {0x13, 0xF4, 0x3D, 0x0C, 0xC4, 0x0B, 0x0C, 0x0E, 0x38, 0xC0, 0x69, 0x60, 0x02}},
- },
- /* 20 fps */
- {
- {0, },
- {9, 956, 650, {0x12, 0xF4, 0x1D, 0x14, 0x4A, 0x12, 0x92, 0x09, 0x48, 0xBC, 0x33, 0x10, 0x03}},
- {6, 776, 528, {0x12, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x40, 0x08, 0x3F, 0x10, 0x03}},
- {4, 591, 402, {0x12, 0xF4, 0x3D, 0x0C, 0x8F, 0x0A, 0xD7, 0x0E, 0x40, 0x4F, 0x4E, 0x10, 0x03}},
- },
- /* 25 fps */
- {
- {0, },
- {9, 956, 544, {0x11, 0xF4, 0x25, 0x10, 0xF4, 0x0F, 0x3C, 0x0A, 0x48, 0xBC, 0x33, 0xC0, 0x02}},
- {7, 840, 478, {0x11, 0xF4, 0x2D, 0x0E, 0xEB, 0x0D, 0x33, 0x0B, 0x48, 0x48, 0x3B, 0xC0, 0x02}},
- {5, 703, 400, {0x11, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x48, 0xBF, 0x42, 0xC0, 0x02}},
- },
- /* 30 fps */
- {
- {0, },
- {9, 956, 438, {0x10, 0xF4, 0x35, 0x0D, 0xAC, 0x0B, 0xF4, 0x0D, 0x50, 0xBC, 0x33, 0x10, 0x02}},
- {7, 838, 384, {0x10, 0xF4, 0x45, 0x0B, 0xFD, 0x0A, 0x45, 0x0F, 0x50, 0x46, 0x3B, 0x10, 0x02}},
- {6, 773, 354, {0x10, 0x7A, 0x4B, 0x0B, 0x0C, 0x09, 0x80, 0x10, 0x50, 0x05, 0x3F, 0x10, 0x02}},
- },
- },
- /* VGA */
- {
- /* 5 fps */
- {
- {0, },
- {6, 773, 1272, {0x1D, 0xF4, 0x15, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x3F, 0x10, 0x02}},
- {4, 592, 976, {0x1D, 0xF4, 0x25, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x4E, 0x10, 0x02}},
- {3, 448, 738, {0x1D, 0xF4, 0x3D, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x69, 0x10, 0x02}},
- },
- /* 10 fps */
- {
- {0, },
- {9, 956, 788, {0x1C, 0xF4, 0x35, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x33, 0x10, 0x02}},
- {6, 776, 640, {0x1C, 0x7A, 0x53, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x3F, 0x10, 0x02}},
- {4, 592, 488, {0x1C, 0x7A, 0x6B, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x4E, 0x10, 0x02}},
- },
- /* 15 fps */
- {
- {0, },
- {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
- {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
- {8, 895, 492, {0x1B, 0x7A, 0x6B, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x37, 0x80, 0x02}},
- },
- /* 20 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 25 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- /* 30 fps */
- {
- {0, },
- {0, },
- {0, },
- {0, },
- },
- },
projects / linux / commitdiff