# CONFIG_PPP is not set
# CONFIG_EQUALIZER is not set
# CONFIG_ARIADNE is not set
-# CONFIG_ARIADNE2 is not set
+# CONFIG_ZORRO8390 is not set
# CONFIG_A2065 is not set
# CONFIG_HYDRA is not set
# CONFIG_MII is not set
# CONFIG_OAKNET is not set
CONFIG_ARIADNE=y
-# CONFIG_ARIADNE2 is not set
-CONFIG_NE2K_ZORRO=y
+# CONFIG_ZORRO8390 is not set
CONFIG_A2065=y
CONFIG_HYDRA=y
# CONFIG_HAPPYMEAL is not set
*/
#if defined(CONFIG_MAC) || \
- defined(CONFIG_ARIADNE2) || defined(CONFIG_ARIADNE2_MODULE) || \
+ defined(CONFIG_ZORRO8390) || defined(CONFIG_ZORRO8390_MODULE) || \
defined(CONFIG_HYDRA) || defined(CONFIG_HYDRA_MODULE)
#define EI_SHIFT(x) (ei_local->reg_offset[x])
#undef inb
want). The module is called ariadne. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
-config ARIADNE2
- tristate "Ariadne II support"
- depends on NETDEVICES && ZORRO
- help
- This driver is for the Village Tronic Ariadne II and the Individual
- Computers X-Surf Ethernet cards. If you have such a card, say Y.
- Otherwise, say N.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ariadne2. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
-
-config NE2K_ZORRO
- tristate "Ariadne II and X-Surf support"
- depends on NET_ETHERNET && ZORRO
-
config A2065
tristate "A2065 support"
depends on NET_ETHERNET && ZORRO
want). The module is called hydra. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
+config ZORRO8390
+ tristate "Zorro NS8390-based Ethernet support"
+ depends on NET_ETHERNET && ZORRO
+ help
+ This driver is for Zorro Ethernet cards using an NS8390-compatible
+ chipset, like the Village Tronic Ariadne II and the Individual
+ Computers X-Surf Ethernet cards. If you have such a card, say Y.
+ Otherwise, say N.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module is called zorro8390. If you want to compile it as
+ a module, say M here and read <file:Documentation/modules.txt>.
+
config APNE
tristate "PCMCIA NE2000 support"
depends on NETDEVICES && AMIGA_PCMCIA
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ARIADNE2) += ariadne2.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_LNE390) += crc32.o
obj-$(CONFIG_NE3210) += crc32.o
obj-$(CONFIG_AC3200) += crc32.o
-obj-$(CONFIG_ARIADNE2) += crc32.o
+obj-$(CONFIG_ZORRO8390) += crc32.o
obj-$(CONFIG_HYDRA) += crc32.o
+++ /dev/null
-/*
- * Amiga Linux/m68k and Linux/PPC Ariadne II and X-Surf Ethernet Driver
- *
- * (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
- *
- * ---------------------------------------------------------------------------
- *
- * This program is based on all the other NE2000 drivers for Linux
- *
- * ---------------------------------------------------------------------------
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of the Linux
- * distribution for more details.
- *
- * ---------------------------------------------------------------------------
- *
- * The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
- * Ethernet Controllers.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/zorro.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-
-#include "8390.h"
-
-
-#define NE_BASE (dev->base_addr)
-#define NE_CMD (0x00*2)
-#define NE_DATAPORT (0x10*2) /* NatSemi-defined port window offset. */
-#define NE_RESET (0x1f*2) /* Issue a read to reset, a write to clear. */
-#define NE_IO_EXTENT (0x20*2)
-
-#define NE_EN0_ISR (0x07*2)
-#define NE_EN0_DCFG (0x0e*2)
-
-#define NE_EN0_RSARLO (0x08*2)
-#define NE_EN0_RSARHI (0x09*2)
-#define NE_EN0_RCNTLO (0x0a*2)
-#define NE_EN0_RXCR (0x0c*2)
-#define NE_EN0_TXCR (0x0d*2)
-#define NE_EN0_RCNTHI (0x0b*2)
-#define NE_EN0_IMR (0x0f*2)
-
-#define NESM_START_PG 0x40 /* First page of TX buffer */
-#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-
-#define WORDSWAP(a) ((((a)>>8)&0xff) | ((a)<<8))
-
-#ifdef MODULE
-static struct net_device *root_ariadne2_dev;
-#endif
-
-static const struct card_info {
- zorro_id id;
- const char *name;
- unsigned int offset;
-} cards[] __initdata = {
- { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
- { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
-};
-
-static int __init ariadne2_probe(void);
-static int __init ariadne2_init(struct net_device *dev, unsigned long board,
- const char *name, unsigned long ioaddr);
-static int ariadne2_open(struct net_device *dev);
-static int ariadne2_close(struct net_device *dev);
-static void ariadne2_reset_8390(struct net_device *dev);
-static void ariadne2_get_8390_hdr(struct net_device *dev,
- struct e8390_pkt_hdr *hdr, int ring_page);
-static void ariadne2_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void ariadne2_block_output(struct net_device *dev, const int count,
- const unsigned char *buf,
- const int start_page);
-static void __exit ariadne2_cleanup(void);
-
-static int __init ariadne2_probe(void)
-{
- struct net_device *dev;
- struct zorro_dev *z = NULL;
- unsigned long board, ioaddr;
- int err = -ENODEV;
- int i;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
- if (z->id == cards[i].id)
- break;
- if (i < 0)
- continue;
- board = z->resource.start;
- ioaddr = board+cards[i].offset;
- dev = init_etherdev(0, 0);
- SET_MODULE_OWNER(dev);
- if (!dev)
- return -ENOMEM;
- if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, dev->name)) {
- kfree(dev);
- continue;
- }
- if ((err = ariadne2_init(dev, board, cards[i].name,
- ZTWO_VADDR(ioaddr)))) {
- release_mem_region(ioaddr, NE_IO_EXTENT*2);
- kfree(dev);
- return err;
- }
- err = 0;
- }
-
- if (err == -ENODEV)
- printk("No Ariadne II or X-Surf ethernet card found.\n");
- return err;
-}
-
-static int __init ariadne2_init(struct net_device *dev, unsigned long board,
- const char *name, unsigned long ioaddr)
-{
- int i;
- unsigned char SA_prom[32];
- int start_page, stop_page;
- static u32 ariadne2_offsets[16] = {
- 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
- 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
- };
-
- /* Reset card. Who knows what dain-bramaged state it was left in. */
- {
- unsigned long reset_start_time = jiffies;
-
- z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
-
- while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
- printk(" not found (no reset ack).\n");
- return -ENODEV;
- }
-
- z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
- }
-
- /* Read the 16 bytes of station address PROM.
- We must first initialize registers, similar to NS8390_init(eifdev, 0).
- We can't reliably read the SAPROM address without this.
- (I learned the hard way!). */
- {
- struct {
- u32 value;
- u32 offset;
- } program_seq[] = {
- {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/
- {0x48, NE_EN0_DCFG}, /* Set byte-wide (0x48) access. */
- {0x00, NE_EN0_RCNTLO}, /* Clear the count regs. */
- {0x00, NE_EN0_RCNTHI},
- {0x00, NE_EN0_IMR}, /* Mask completion irq. */
- {0xFF, NE_EN0_ISR},
- {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
- {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode. */
- {32, NE_EN0_RCNTLO},
- {0x00, NE_EN0_RCNTHI},
- {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000. */
- {0x00, NE_EN0_RSARHI},
- {E8390_RREAD+E8390_START, NE_CMD},
- };
- for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) {
- z_writeb(program_seq[i].value, ioaddr + program_seq[i].offset);
- }
- }
- for (i = 0; i < 16; i++) {
- SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
- (void)z_readb(ioaddr + NE_DATAPORT);
- }
-
- /* We must set the 8390 for word mode. */
- z_writeb(0x49, ioaddr + NE_EN0_DCFG);
- start_page = NESM_START_PG;
- stop_page = NESM_STOP_PG;
-
- dev->base_addr = ioaddr;
- dev->irq = IRQ_AMIGA_PORTS;
-
- /* Install the Interrupt handler */
- i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, dev->name, dev);
- if (i) return i;
-
- /* Allocate dev->priv and fill in 8390 specific dev fields. */
- if (ethdev_init(dev)) {
- printk("Unable to get memory for dev->priv.\n");
- return -ENOMEM;
- }
-
- for(i = 0; i < ETHER_ADDR_LEN; i++) {
-#ifdef DEBUG
- printk(" %2.2x", SA_prom[i]);
-#endif
- dev->dev_addr[i] = SA_prom[i];
- }
-
- printk("%s: %s at 0x%08lx, Ethernet Address "
- "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, name, board,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
-
- ei_status.name = name;
- ei_status.tx_start_page = start_page;
- ei_status.stop_page = stop_page;
- ei_status.word16 = 1;
-
- ei_status.rx_start_page = start_page + TX_PAGES;
-
- ei_status.reset_8390 = &ariadne2_reset_8390;
- ei_status.block_input = &ariadne2_block_input;
- ei_status.block_output = &ariadne2_block_output;
- ei_status.get_8390_hdr = &ariadne2_get_8390_hdr;
- ei_status.reg_offset = ariadne2_offsets;
- dev->open = &ariadne2_open;
- dev->stop = &ariadne2_close;
-#ifdef MODULE
- ei_status.priv = (unsigned long)root_ariadne2_dev;
- root_ariadne2_dev = dev;
-#endif
- NS8390_init(dev, 0);
- return 0;
-}
-
-static int ariadne2_open(struct net_device *dev)
-{
- ei_open(dev);
- return 0;
-}
-
-static int ariadne2_close(struct net_device *dev)
-{
- if (ei_debug > 1)
- printk("%s: Shutting down ethercard.\n", dev->name);
- ei_close(dev);
- return 0;
-}
-
-/* Hard reset the card. This used to pause for the same period that a
- 8390 reset command required, but that shouldn't be necessary. */
-static void ariadne2_reset_8390(struct net_device *dev)
-{
- unsigned long reset_start_time = jiffies;
-
- if (ei_debug > 1)
- printk("resetting the 8390 t=%ld...", jiffies);
-
- z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
-
- ei_status.txing = 0;
- ei_status.dmaing = 0;
-
- /* This check _should_not_ be necessary, omit eventually. */
- while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
- printk("%s: ne_reset_8390() did not complete.\n", dev->name);
- break;
- }
- z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */
-}
-
-/* Grab the 8390 specific header. Similar to the block_input routine, but
- we don't need to be concerned with ring wrap as the header will be at
- the start of a page, so we optimize accordingly. */
-
-static void ariadne2_get_8390_hdr(struct net_device *dev,
- struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int nic_base = dev->base_addr;
- int cnt;
- short *ptrs;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing) {
- printk("%s: DMAing conflict in ne_get_8390_hdr "
- "[DMAstat:%d][irqlock:%d].\n", dev->name, ei_status.dmaing,
- ei_status.irqlock);
- return;
- }
-
- ei_status.dmaing |= 0x01;
- z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
- z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
- z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
- z_writeb(0, nic_base + NE_EN0_RCNTHI);
- z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
- z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
- z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
-
- ptrs = (short*)hdr;
- for (cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
- *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
-
- z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
-
- hdr->count = WORDSWAP(hdr->count);
-
- ei_status.dmaing &= ~0x01;
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you
- are porting to a new ethercard, look at the packet driver source for hints.
- The NEx000 doesn't share the on-board packet memory -- you have to put
- the packet out through the "remote DMA" dataport using z_writeb. */
-
-static void ariadne2_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset)
-{
- int nic_base = dev->base_addr;
- char *buf = skb->data;
- short *ptrs;
- int cnt;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing) {
- printk("%s: DMAing conflict in ne_block_input "
- "[DMAstat:%d][irqlock:%d].\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
- z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
- z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
- z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
- z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
- z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
- z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
- ptrs = (short*)buf;
- for (cnt = 0; cnt < (count>>1); cnt++)
- *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
- if (count & 0x01)
- buf[count-1] = z_readb(NE_BASE + NE_DATAPORT);
-
- z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-static void ariadne2_block_output(struct net_device *dev, int count,
- const unsigned char *buf,
- const int start_page)
-{
- int nic_base = NE_BASE;
- unsigned long dma_start;
- short *ptrs;
- int cnt;
-
- /* Round the count up for word writes. Do we need to do this?
- What effect will an odd byte count have on the 8390?
- I should check someday. */
- if (count & 0x01)
- count++;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing) {
- printk("%s: DMAing conflict in ne_block_output."
- "[DMAstat:%d][irqlock:%d]\n", dev->name, ei_status.dmaing,
- ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- /* We should already be in page 0, but to be safe... */
- z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
-
- z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
-
- /* Now the normal output. */
- z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
- z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
- z_writeb(0x00, nic_base + NE_EN0_RSARLO);
- z_writeb(start_page, nic_base + NE_EN0_RSARHI);
-
- z_writeb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
- ptrs = (short*)buf;
- for (cnt = 0; cnt < count>>1; cnt++)
- z_writew(*ptrs++, NE_BASE+NE_DATAPORT);
-
- dma_start = jiffies;
-
- while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
- printk("%s: timeout waiting for Tx RDC.\n", dev->name);
- ariadne2_reset_8390(dev);
- NS8390_init(dev,1);
- break;
- }
-
- z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
- return;
-}
-
-static void __exit ariadne2_cleanup(void)
-{
-#ifdef MODULE
- struct net_device *dev, *next;
-
- while ((dev = root_ariadne2_dev)) {
- next = (struct net_device *)(ei_status.priv);
- unregister_netdev(dev);
- free_irq(IRQ_AMIGA_PORTS, dev);
- release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT*2);
- kfree(dev);
- root_ariadne2_dev = next;
- }
-#endif
-}
-
-module_init(ariadne2_probe);
-module_exit(ariadne2_cleanup);
-
-MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver
+ *
+ * (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * This program is based on all the other NE2000 drivers for Linux
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of the Linux
+ * distribution for more details.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
+ * Ethernet Controllers.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/zorro.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+
+#include "8390.h"
+
+
+#define NE_BASE (dev->base_addr)
+#define NE_CMD (0x00*2)
+#define NE_DATAPORT (0x10*2) /* NatSemi-defined port window offset. */
+#define NE_RESET (0x1f*2) /* Issue a read to reset, a write to clear. */
+#define NE_IO_EXTENT (0x20*2)
+
+#define NE_EN0_ISR (0x07*2)
+#define NE_EN0_DCFG (0x0e*2)
+
+#define NE_EN0_RSARLO (0x08*2)
+#define NE_EN0_RSARHI (0x09*2)
+#define NE_EN0_RCNTLO (0x0a*2)
+#define NE_EN0_RXCR (0x0c*2)
+#define NE_EN0_TXCR (0x0d*2)
+#define NE_EN0_RCNTHI (0x0b*2)
+#define NE_EN0_IMR (0x0f*2)
+
+#define NESM_START_PG 0x40 /* First page of TX buffer */
+#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
+
+
+#define WORDSWAP(a) ((((a)>>8)&0xff) | ((a)<<8))
+
+#ifdef MODULE
+static struct net_device *root_zorro8390_dev;
+#endif
+
+static const struct card_info {
+ zorro_id id;
+ const char *name;
+ unsigned int offset;
+} cards[] __initdata = {
+ { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
+ { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
+};
+
+static int __init zorro8390_probe(void);
+static int __init zorro8390_init(struct net_device *dev, unsigned long board,
+ const char *name, unsigned long ioaddr);
+static int zorro8390_open(struct net_device *dev);
+static int zorro8390_close(struct net_device *dev);
+static void zorro8390_reset_8390(struct net_device *dev);
+static void zorro8390_get_8390_hdr(struct net_device *dev,
+ struct e8390_pkt_hdr *hdr, int ring_page);
+static void zorro8390_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset);
+static void zorro8390_block_output(struct net_device *dev, const int count,
+ const unsigned char *buf,
+ const int start_page);
+static void __exit zorro8390_cleanup(void);
+
+static int __init zorro8390_probe(void)
+{
+ struct net_device *dev;
+ struct zorro_dev *z = NULL;
+ unsigned long board, ioaddr;
+ int err = -ENODEV;
+ int i;
+
+ while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
+ for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
+ if (z->id == cards[i].id)
+ break;
+ if (i < 0)
+ continue;
+ board = z->resource.start;
+ ioaddr = board+cards[i].offset;
+ dev = init_etherdev(0, 0);
+ SET_MODULE_OWNER(dev);
+ if (!dev)
+ return -ENOMEM;
+ if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, dev->name)) {
+ kfree(dev);
+ continue;
+ }
+ if ((err = zorro8390_init(dev, board, cards[i].name,
+ ZTWO_VADDR(ioaddr)))) {
+ release_mem_region(ioaddr, NE_IO_EXTENT*2);
+ kfree(dev);
+ return err;
+ }
+ err = 0;
+ }
+
+ if (err == -ENODEV)
+ printk("No Ariadne II or X-Surf ethernet card found.\n");
+ return err;
+}
+
+static int __init zorro8390_init(struct net_device *dev, unsigned long board,
+ const char *name, unsigned long ioaddr)
+{
+ int i;
+ unsigned char SA_prom[32];
+ int start_page, stop_page;
+ static u32 zorro8390_offsets[16] = {
+ 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
+ 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
+ };
+
+ /* Reset card. Who knows what dain-bramaged state it was left in. */
+ {
+ unsigned long reset_start_time = jiffies;
+
+ z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
+
+ while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
+ if (jiffies - reset_start_time > 2*HZ/100) {
+ printk(" not found (no reset ack).\n");
+ return -ENODEV;
+ }
+
+ z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
+ }
+
+ /* Read the 16 bytes of station address PROM.
+ We must first initialize registers, similar to NS8390_init(eifdev, 0).
+ We can't reliably read the SAPROM address without this.
+ (I learned the hard way!). */
+ {
+ struct {
+ u32 value;
+ u32 offset;
+ } program_seq[] = {
+ {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/
+ {0x48, NE_EN0_DCFG}, /* Set byte-wide (0x48) access. */
+ {0x00, NE_EN0_RCNTLO}, /* Clear the count regs. */
+ {0x00, NE_EN0_RCNTHI},
+ {0x00, NE_EN0_IMR}, /* Mask completion irq. */
+ {0xFF, NE_EN0_ISR},
+ {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
+ {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode. */
+ {32, NE_EN0_RCNTLO},
+ {0x00, NE_EN0_RCNTHI},
+ {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000. */
+ {0x00, NE_EN0_RSARHI},
+ {E8390_RREAD+E8390_START, NE_CMD},
+ };
+ for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) {
+ z_writeb(program_seq[i].value, ioaddr + program_seq[i].offset);
+ }
+ }
+ for (i = 0; i < 16; i++) {
+ SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
+ (void)z_readb(ioaddr + NE_DATAPORT);
+ }
+
+ /* We must set the 8390 for word mode. */
+ z_writeb(0x49, ioaddr + NE_EN0_DCFG);
+ start_page = NESM_START_PG;
+ stop_page = NESM_STOP_PG;
+
+ dev->base_addr = ioaddr;
+ dev->irq = IRQ_AMIGA_PORTS;
+
+ /* Install the Interrupt handler */
+ i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, dev->name, dev);
+ if (i) return i;
+
+ /* Allocate dev->priv and fill in 8390 specific dev fields. */
+ if (ethdev_init(dev)) {
+ printk("Unable to get memory for dev->priv.\n");
+ return -ENOMEM;
+ }
+
+ for(i = 0; i < ETHER_ADDR_LEN; i++) {
+#ifdef DEBUG
+ printk(" %2.2x", SA_prom[i]);
+#endif
+ dev->dev_addr[i] = SA_prom[i];
+ }
+
+ printk("%s: %s at 0x%08lx, Ethernet Address "
+ "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, name, board,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+
+ ei_status.name = name;
+ ei_status.tx_start_page = start_page;
+ ei_status.stop_page = stop_page;
+ ei_status.word16 = 1;
+
+ ei_status.rx_start_page = start_page + TX_PAGES;
+
+ ei_status.reset_8390 = &zorro8390_reset_8390;
+ ei_status.block_input = &zorro8390_block_input;
+ ei_status.block_output = &zorro8390_block_output;
+ ei_status.get_8390_hdr = &zorro8390_get_8390_hdr;
+ ei_status.reg_offset = zorro8390_offsets;
+ dev->open = &zorro8390_open;
+ dev->stop = &zorro8390_close;
+#ifdef MODULE
+ ei_status.priv = (unsigned long)root_zorro8390_dev;
+ root_zorro8390_dev = dev;
+#endif
+ NS8390_init(dev, 0);
+ return 0;
+}
+
+static int zorro8390_open(struct net_device *dev)
+{
+ ei_open(dev);
+ return 0;
+}
+
+static int zorro8390_close(struct net_device *dev)
+{
+ if (ei_debug > 1)
+ printk("%s: Shutting down ethercard.\n", dev->name);
+ ei_close(dev);
+ return 0;
+}
+
+/* Hard reset the card. This used to pause for the same period that a
+ 8390 reset command required, but that shouldn't be necessary. */
+static void zorro8390_reset_8390(struct net_device *dev)
+{
+ unsigned long reset_start_time = jiffies;
+
+ if (ei_debug > 1)
+ printk("resetting the 8390 t=%ld...", jiffies);
+
+ z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
+
+ ei_status.txing = 0;
+ ei_status.dmaing = 0;
+
+ /* This check _should_not_ be necessary, omit eventually. */
+ while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
+ if (jiffies - reset_start_time > 2*HZ/100) {
+ printk("%s: ne_reset_8390() did not complete.\n", dev->name);
+ break;
+ }
+ z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */
+}
+
+/* Grab the 8390 specific header. Similar to the block_input routine, but
+ we don't need to be concerned with ring wrap as the header will be at
+ the start of a page, so we optimize accordingly. */
+
+static void zorro8390_get_8390_hdr(struct net_device *dev,
+ struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ int nic_base = dev->base_addr;
+ int cnt;
+ short *ptrs;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk("%s: DMAing conflict in ne_get_8390_hdr "
+ "[DMAstat:%d][irqlock:%d].\n", dev->name, ei_status.dmaing,
+ ei_status.irqlock);
+ return;
+ }
+
+ ei_status.dmaing |= 0x01;
+ z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+ z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
+ z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
+ z_writeb(0, nic_base + NE_EN0_RCNTHI);
+ z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
+ z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
+ z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+ ptrs = (short*)hdr;
+ for (cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
+ *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
+
+ z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
+
+ hdr->count = WORDSWAP(hdr->count);
+
+ ei_status.dmaing &= ~0x01;
+}
+
+/* Block input and output, similar to the Crynwr packet driver. If you
+ are porting to a new ethercard, look at the packet driver source for hints.
+ The NEx000 doesn't share the on-board packet memory -- you have to put
+ the packet out through the "remote DMA" dataport using z_writeb. */
+
+static void zorro8390_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset)
+{
+ int nic_base = dev->base_addr;
+ char *buf = skb->data;
+ short *ptrs;
+ int cnt;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk("%s: DMAing conflict in ne_block_input "
+ "[DMAstat:%d][irqlock:%d].\n",
+ dev->name, ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+ ei_status.dmaing |= 0x01;
+ z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+ z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
+ z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
+ z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
+ z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
+ z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
+ z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+ ptrs = (short*)buf;
+ for (cnt = 0; cnt < (count>>1); cnt++)
+ *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
+ if (count & 0x01)
+ buf[count-1] = z_readb(NE_BASE + NE_DATAPORT);
+
+ z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+}
+
+static void zorro8390_block_output(struct net_device *dev, int count,
+ const unsigned char *buf,
+ const int start_page)
+{
+ int nic_base = NE_BASE;
+ unsigned long dma_start;
+ short *ptrs;
+ int cnt;
+
+ /* Round the count up for word writes. Do we need to do this?
+ What effect will an odd byte count have on the 8390?
+ I should check someday. */
+ if (count & 0x01)
+ count++;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk("%s: DMAing conflict in ne_block_output."
+ "[DMAstat:%d][irqlock:%d]\n", dev->name, ei_status.dmaing,
+ ei_status.irqlock);
+ return;
+ }
+ ei_status.dmaing |= 0x01;
+ /* We should already be in page 0, but to be safe... */
+ z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
+
+ z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
+
+ /* Now the normal output. */
+ z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
+ z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
+ z_writeb(0x00, nic_base + NE_EN0_RSARLO);
+ z_writeb(start_page, nic_base + NE_EN0_RSARHI);
+
+ z_writeb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
+ ptrs = (short*)buf;
+ for (cnt = 0; cnt < count>>1; cnt++)
+ z_writew(*ptrs++, NE_BASE+NE_DATAPORT);
+
+ dma_start = jiffies;
+
+ while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
+ if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ printk("%s: timeout waiting for Tx RDC.\n", dev->name);
+ zorro8390_reset_8390(dev);
+ NS8390_init(dev,1);
+ break;
+ }
+
+ z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+ return;
+}
+
+static void __exit zorro8390_cleanup(void)
+{
+#ifdef MODULE
+ struct net_device *dev, *next;
+
+ while ((dev = root_zorro8390_dev)) {
+ next = (struct net_device *)(ei_status.priv);
+ unregister_netdev(dev);
+ free_irq(IRQ_AMIGA_PORTS, dev);
+ release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT*2);
+ kfree(dev);
+ root_zorro8390_dev = next;
+ }
+#endif
+}
+
+module_init(zorro8390_probe);
+module_exit(zorro8390_cleanup);
+
+MODULE_LICENSE("GPL");
projects / linux / commitdiff