pata_hpt{37x|3x2n}: fix timing register masks (take 2)

commit 5600c70e576199a7552e1c0fff43f3fe16f5566e upstream.

These drivers inherited from the older 'hpt366' IDE driver the buggy timing
register masks in their set_piomode() metods. As a result, too low command
cycle active time is programmed for slow PIO modes.  Quite fortunately, it's
later "fixed up" by the set_dmamode() methods which also "helpfully" reprogram
the command timings, usually to PIO mode 4; unfortunately, setting an UltraDMA
mode #N also reprograms already set PIO data timings, usually to MWDMA mode #
max(N, 2) timings...

However, the drivers added some breakage of their own too:  the bit that they
set/clear to control the FIFO is sometimes wrong -- it's actually the MSB of
the command cycle setup time; also, setting it in DMA mode is wrong as this
bit is only for PIO actually and clearing it for PIO modes is not needed as
no mode in any timing table has it set...

Fix all this, inverting the masks while at it, like in the 'hpt366' and
'pata_hpt366' drivers; bump the drivers' versions, accounting for recent
patches that forgot to do it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 233a5fdf9a8880b2ba63272d4470511f2225449d..2496c2bb4ae17bdcd4e2e92072cb92ba0087923f 100644 (file)
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt37x"
-#define DRV_VERSION    "0.6.12"
+#define DRV_VERSION    "0.6.14"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -404,9 +404,8 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
        pci_read_config_dword(pdev, addr1, &reg);
        mode = hpt37x_find_mode(ap, adev->pio_mode);
-       mode &= ~0x8000000;     /* No FIFO in PIO */
-       mode &= ~0x30070000;    /* Leave config bits alone */
-       reg &= 0x30070000;      /* Strip timing bits */
+       mode &= 0xCFC3FFFF;     /* Leave DMA bits alone */
+       reg &= ~0xCFC3FFFF;     /* Strip timing bits */
        pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -423,8 +422,7 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u32 addr1, addr2;
-       u32 reg;
-       u32 mode;
+       u32 reg, mode, mask;
        u8 fast;
 
        addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -436,11 +434,12 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        fast |= 0x01;
        pci_write_config_byte(pdev, addr2, fast);
 
+       mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
        pci_read_config_dword(pdev, addr1, &reg);
        mode = hpt37x_find_mode(ap, adev->dma_mode);
-       mode |= 0x8000000;      /* FIFO in MWDMA or UDMA */
-       mode &= ~0xC0000000;    /* Leave config bits alone */
-       reg &= 0xC0000000;      /* Strip timing bits */
+       mode &= mask;
+       reg &= ~mask;
        pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -508,9 +507,8 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev)
        mode = hpt37x_find_mode(ap, adev->pio_mode);
 
        printk("Find mode for %d reports %X\n", adev->pio_mode, mode);
-       mode &= ~0x80000000;    /* No FIFO in PIO */
-       mode &= ~0x30070000;    /* Leave config bits alone */
-       reg &= 0x30070000;      /* Strip timing bits */
+       mode &= 0xCFC3FFFF;     /* Leave DMA bits alone */
+       reg &= ~0xCFC3FFFF;     /* Strip timing bits */
        pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -527,8 +525,7 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u32 addr1, addr2;
-       u32 reg;
-       u32 mode;
+       u32 reg, mode, mask;
        u8 fast;
 
        addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -539,12 +536,13 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        fast &= ~0x07;
        pci_write_config_byte(pdev, addr2, fast);
 
+       mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
        pci_read_config_dword(pdev, addr1, &reg);
        mode = hpt37x_find_mode(ap, adev->dma_mode);
        printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode);
-       mode &= ~0xC0000000;    /* Leave config bits alone */
-       mode |= 0x80000000;     /* FIFO in MWDMA or UDMA */
-       reg &= 0xC0000000;      /* Strip timing bits */
+       mode &= mask;
+       reg &= ~mask;
        pci_write_config_dword(pdev, addr1, reg | mode);
 }
 

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d5c9fd7b82bba79e63308e28c7e69b0454a8de6d..5f9b60f0885ac924b4b313bc44d91e75c493f915 100644 (file)
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt3x2n"
-#define DRV_VERSION    "0.3.4"
+#define DRV_VERSION    "0.3.7"
 
 enum {
        HPT_PCI_FAST    =       (1 << 31),
@@ -185,9 +185,8 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
        pci_read_config_dword(pdev, addr1, &reg);
        mode = hpt3x2n_find_mode(ap, adev->pio_mode);
-       mode &= ~0x8000000;     /* No FIFO in PIO */
-       mode &= ~0x30070000;    /* Leave config bits alone */
-       reg &= 0x30070000;      /* Strip timing bits */
+       mode &= 0xCFC3FFFF;     /* Leave DMA bits alone */
+       reg &= ~0xCFC3FFFF;     /* Strip timing bits */
        pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -204,8 +203,7 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u32 addr1, addr2;
-       u32 reg;
-       u32 mode;
+       u32 reg, mode, mask;
        u8 fast;
 
        addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -216,11 +214,12 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        fast &= ~0x07;
        pci_write_config_byte(pdev, addr2, fast);
 
+       mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
        pci_read_config_dword(pdev, addr1, &reg);
        mode = hpt3x2n_find_mode(ap, adev->dma_mode);
-       mode |= 0x8000000;      /* FIFO in MWDMA or UDMA */
-       mode &= ~0xC0000000;    /* Leave config bits alone */
-       reg &= 0xC0000000;      /* Strip timing bits */
+       mode &= mask;
+       reg &= ~mask;
        pci_write_config_dword(pdev, addr1, reg | mode);
 }