with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-config EDD
- tristate "BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- Say Y or M here if you want to enable BIOS Enhanced Disk Drive
- Services real mode BIOS calls to determine which disk
- BIOS tries boot from. This information is then exported via driverfs.
-
- This option is experimental, but believed to be safe,
- and most disk controller BIOS vendors do not yet implement this feature.
+source "drivers/firmware/Kconfig"
choice
prompt "High Memory Support"
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
-obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_MODULES) += module.o
obj-y += sysenter.o vsyscall.o
obj-$(CONFIG_ACPI_SRAT) += srat.o
+++ /dev/null
-/*
- * linux/arch/i386/kernel/edd.c
- * Copyright (C) 2002, 2003, 2004 Dell Inc.
- * by Matt Domsch <Matt_Domsch@dell.com>
- * disk80 signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
- * legacy CHS by Patrick J. LoPresti <patl@users.sourceforge.net>
- *
- * BIOS Enhanced Disk Drive Services (EDD)
- * conformant to T13 Committee www.t13.org
- * projects 1572D, 1484D, 1386D, 1226DT
- *
- * This code takes information provided by BIOS EDD calls
- * fn41 - Check Extensions Present and
- * fn48 - Get Device Parametes with EDD extensions
- * made in setup.S, copied to safe structures in setup.c,
- * and presents it in sysfs.
- *
- * Please see http://domsch.com/linux/edd30/results.html for
- * the list of BIOSs which have been reported to implement EDD.
- * If you don't see yours listed, please send a report as described there.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/*
- * Known issues:
- * - refcounting of struct device objects could be improved.
- *
- * TODO:
- * - Add IDE and USB disk device support
- * - move edd.[ch] to better locations if/when one is decided
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/stat.h>
-#include <linux/err.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-#include <linux/limits.h>
-#include <linux/device.h>
-#include <linux/pci.h>
-#include <linux/device.h>
-#include <linux/blkdev.h>
-#include <asm/edd.h>
-/* FIXME - this really belongs in include/scsi/scsi.h */
-#include <../drivers/scsi/scsi.h>
-#include <../drivers/scsi/hosts.h>
-
-MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
-MODULE_DESCRIPTION("sysfs interface to BIOS EDD information");
-MODULE_LICENSE("GPL");
-
-#define EDD_VERSION "0.13 2004-Mar-09"
-#define EDD_DEVICE_NAME_SIZE 16
-#define REPORT_URL "http://linux.dell.com/edd/results.html"
-
-#define left (PAGE_SIZE - (p - buf) - 1)
-
-struct edd_device {
- struct edd_info *info;
- struct kobject kobj;
-};
-
-struct edd_attribute {
- struct attribute attr;
- ssize_t(*show) (struct edd_device * edev, char *buf);
- int (*test) (struct edd_device * edev);
-};
-
-/* forward declarations */
-static int edd_dev_is_type(struct edd_device *edev, const char *type);
-static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
-
-static struct edd_device *edd_devices[EDDMAXNR];
-
-#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
-struct edd_attribute edd_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode }, \
- .show = _show, \
- .test = _test, \
-};
-
-static inline struct edd_info *
-edd_dev_get_info(struct edd_device *edev)
-{
- return edev->info;
-}
-
-static inline void
-edd_dev_set_info(struct edd_device *edev, struct edd_info *info)
-{
- edev->info = info;
-}
-
-#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
-#define to_edd_device(obj) container_of(obj,struct edd_device,kobj)
-
-static ssize_t
-edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
-{
- struct edd_device *dev = to_edd_device(kobj);
- struct edd_attribute *edd_attr = to_edd_attr(attr);
- ssize_t ret = 0;
-
- if (edd_attr->show)
- ret = edd_attr->show(dev, buf);
- return ret;
-}
-
-static struct sysfs_ops edd_attr_ops = {
- .show = edd_attr_show,
-};
-
-static ssize_t
-edd_show_host_bus(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- int i;
-
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- for (i = 0; i < 4; i++) {
- if (isprint(info->params.host_bus_type[i])) {
- p += scnprintf(p, left, "%c", info->params.host_bus_type[i]);
- } else {
- p += scnprintf(p, left, " ");
- }
- }
-
- if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
- p += scnprintf(p, left, "\tbase_address: %x\n",
- info->params.interface_path.isa.base_address);
- } else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
- !strncmp(info->params.host_bus_type, "PCI", 3)) {
- p += scnprintf(p, left,
- "\t%02x:%02x.%d channel: %u\n",
- info->params.interface_path.pci.bus,
- info->params.interface_path.pci.slot,
- info->params.interface_path.pci.function,
- info->params.interface_path.pci.channel);
- } else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
- !strncmp(info->params.host_bus_type, "XPRS", 4) ||
- !strncmp(info->params.host_bus_type, "HTPT", 4)) {
- p += scnprintf(p, left,
- "\tTBD: %llx\n",
- info->params.interface_path.ibnd.reserved);
-
- } else {
- p += scnprintf(p, left, "\tunknown: %llx\n",
- info->params.interface_path.unknown.reserved);
- }
- return (p - buf);
-}
-
-static ssize_t
-edd_show_interface(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- int i;
-
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- for (i = 0; i < 8; i++) {
- if (isprint(info->params.interface_type[i])) {
- p += scnprintf(p, left, "%c", info->params.interface_type[i]);
- } else {
- p += scnprintf(p, left, " ");
- }
- }
- if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
- p += scnprintf(p, left, "\tdevice: %u lun: %u\n",
- info->params.device_path.atapi.device,
- info->params.device_path.atapi.lun);
- } else if (!strncmp(info->params.interface_type, "ATA", 3)) {
- p += scnprintf(p, left, "\tdevice: %u\n",
- info->params.device_path.ata.device);
- } else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
- p += scnprintf(p, left, "\tid: %u lun: %llu\n",
- info->params.device_path.scsi.id,
- info->params.device_path.scsi.lun);
- } else if (!strncmp(info->params.interface_type, "USB", 3)) {
- p += scnprintf(p, left, "\tserial_number: %llx\n",
- info->params.device_path.usb.serial_number);
- } else if (!strncmp(info->params.interface_type, "1394", 4)) {
- p += scnprintf(p, left, "\teui: %llx\n",
- info->params.device_path.i1394.eui);
- } else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
- p += scnprintf(p, left, "\twwid: %llx lun: %llx\n",
- info->params.device_path.fibre.wwid,
- info->params.device_path.fibre.lun);
- } else if (!strncmp(info->params.interface_type, "I2O", 3)) {
- p += scnprintf(p, left, "\tidentity_tag: %llx\n",
- info->params.device_path.i2o.identity_tag);
- } else if (!strncmp(info->params.interface_type, "RAID", 4)) {
- p += scnprintf(p, left, "\tidentity_tag: %x\n",
- info->params.device_path.raid.array_number);
- } else if (!strncmp(info->params.interface_type, "SATA", 4)) {
- p += scnprintf(p, left, "\tdevice: %u\n",
- info->params.device_path.sata.device);
- } else {
- p += scnprintf(p, left, "\tunknown: %llx %llx\n",
- info->params.device_path.unknown.reserved1,
- info->params.device_path.unknown.reserved2);
- }
-
- return (p - buf);
-}
-
-/**
- * edd_show_raw_data() - copies raw data to buffer for userspace to parse
- *
- * Returns: number of bytes written, or -EINVAL on failure
- */
-static ssize_t
-edd_show_raw_data(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- ssize_t len = sizeof (info->params);
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
- len = info->params.length;
-
- /* In case of buggy BIOSs */
- if (len > (sizeof(info->params)))
- len = sizeof(info->params);
-
- memcpy(buf, &info->params, len);
- return len;
-}
-
-static ssize_t
-edd_show_version(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += scnprintf(p, left, "0x%02x\n", info->version);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_disk80_sig(struct edd_device *edev, char *buf)
-{
- char *p = buf;
- p += scnprintf(p, left, "0x%08x\n", edd_disk80_sig);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_extensions(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
- p += scnprintf(p, left, "Fixed disk access\n");
- }
- if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
- p += scnprintf(p, left, "Device locking and ejecting\n");
- }
- if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
- p += scnprintf(p, left, "Enhanced Disk Drive support\n");
- }
- if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
- p += scnprintf(p, left, "64-bit extensions\n");
- }
- return (p - buf);
-}
-
-static ssize_t
-edd_show_info_flags(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- if (info->params.info_flags & EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT)
- p += scnprintf(p, left, "DMA boundary error transparent\n");
- if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
- p += scnprintf(p, left, "geometry valid\n");
- if (info->params.info_flags & EDD_INFO_REMOVABLE)
- p += scnprintf(p, left, "removable\n");
- if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
- p += scnprintf(p, left, "write verify\n");
- if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
- p += scnprintf(p, left, "media change notification\n");
- if (info->params.info_flags & EDD_INFO_LOCKABLE)
- p += scnprintf(p, left, "lockable\n");
- if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
- p += scnprintf(p, left, "no media present\n");
- if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
- p += scnprintf(p, left, "use int13 fn50\n");
- return (p - buf);
-}
-
-static ssize_t
-edd_show_legacy_cylinders(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += snprintf(p, left, "0x%x\n", info->legacy_cylinders);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_legacy_heads(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += snprintf(p, left, "0x%x\n", info->legacy_heads);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_legacy_sectors(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += snprintf(p, left, "0x%x\n", info->legacy_sectors);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_default_cylinders(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += scnprintf(p, left, "0x%x\n", info->params.num_default_cylinders);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_default_heads(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += scnprintf(p, left, "0x%x\n", info->params.num_default_heads);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_default_sectors_per_track(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += scnprintf(p, left, "0x%x\n", info->params.sectors_per_track);
- return (p - buf);
-}
-
-static ssize_t
-edd_show_sectors(struct edd_device *edev, char *buf)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- char *p = buf;
- if (!edev || !info || !buf) {
- return -EINVAL;
- }
-
- p += scnprintf(p, left, "0x%llx\n", info->params.number_of_sectors);
- return (p - buf);
-}
-
-
-/*
- * Some device instances may not have all the above attributes,
- * or the attribute values may be meaningless (i.e. if
- * the device is < EDD 3.0, it won't have host_bus and interface
- * information), so don't bother making files for them. Likewise
- * if the default_{cylinders,heads,sectors_per_track} values
- * are zero, the BIOS doesn't provide sane values, don't bother
- * creating files for them either.
- */
-
-static int
-edd_has_legacy_cylinders(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return -EINVAL;
- return info->legacy_cylinders > 0;
-}
-
-static int
-edd_has_legacy_heads(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return -EINVAL;
- return info->legacy_heads > 0;
-}
-
-static int
-edd_has_legacy_sectors(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return -EINVAL;
- return info->legacy_sectors > 0;
-}
-
-static int
-edd_has_default_cylinders(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return -EINVAL;
- return info->params.num_default_cylinders > 0;
-}
-
-static int
-edd_has_default_heads(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return -EINVAL;
- return info->params.num_default_heads > 0;
-}
-
-static int
-edd_has_default_sectors_per_track(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return -EINVAL;
- return info->params.sectors_per_track > 0;
-}
-
-static int
-edd_has_edd30(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- int i, nonzero_path = 0;
- char c;
-
- if (!edev || !info)
- return 0;
-
- if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
- return 0;
- }
-
- for (i = 30; i <= 73; i++) {
- c = *(((uint8_t *) info) + i + 4);
- if (c) {
- nonzero_path++;
- break;
- }
- }
- if (!nonzero_path) {
- return 0;
- }
-
- return 1;
-}
-
-static int
-edd_has_disk80_sig(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
- if (!edev || !info)
- return 0;
- return info->device == 0x80;
-}
-
-static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data, NULL);
-static EDD_DEVICE_ATTR(version, 0444, edd_show_version, NULL);
-static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions, NULL);
-static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags, NULL);
-static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors, NULL);
-static EDD_DEVICE_ATTR(legacy_cylinders, 0444, edd_show_legacy_cylinders,
- edd_has_legacy_cylinders);
-static EDD_DEVICE_ATTR(legacy_heads, 0444, edd_show_legacy_heads,
- edd_has_legacy_heads);
-static EDD_DEVICE_ATTR(legacy_sectors, 0444, edd_show_legacy_sectors,
- edd_has_legacy_sectors);
-static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders,
- edd_has_default_cylinders);
-static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads,
- edd_has_default_heads);
-static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
- edd_show_default_sectors_per_track,
- edd_has_default_sectors_per_track);
-static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface, edd_has_edd30);
-static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus, edd_has_edd30);
-static EDD_DEVICE_ATTR(mbr_signature, 0444, edd_show_disk80_sig, edd_has_disk80_sig);
-
-
-/* These are default attributes that are added for every edd
- * device discovered.
- */
-static struct attribute * def_attrs[] = {
- &edd_attr_raw_data.attr,
- &edd_attr_version.attr,
- &edd_attr_extensions.attr,
- &edd_attr_info_flags.attr,
- &edd_attr_sectors.attr,
- NULL,
-};
-
-/* These attributes are conditional and only added for some devices. */
-static struct edd_attribute * edd_attrs[] = {
- &edd_attr_legacy_cylinders,
- &edd_attr_legacy_heads,
- &edd_attr_legacy_sectors,
- &edd_attr_default_cylinders,
- &edd_attr_default_heads,
- &edd_attr_default_sectors_per_track,
- &edd_attr_interface,
- &edd_attr_host_bus,
- &edd_attr_mbr_signature,
- NULL,
-};
-
-/**
- * edd_release - free edd structure
- * @kobj: kobject of edd structure
- *
- * This is called when the refcount of the edd structure
- * reaches 0. This should happen right after we unregister,
- * but just in case, we use the release callback anyway.
- */
-
-static void edd_release(struct kobject * kobj)
-{
- struct edd_device * dev = to_edd_device(kobj);
- kfree(dev);
-}
-
-static struct kobj_type ktype_edd = {
- .release = edd_release,
- .sysfs_ops = &edd_attr_ops,
- .default_attrs = def_attrs,
-};
-
-static decl_subsys(edd,&ktype_edd,NULL);
-
-
-/**
- * edd_dev_is_type() - is this EDD device a 'type' device?
- * @edev
- * @type - a host bus or interface identifier string per the EDD spec
- *
- * Returns 1 (TRUE) if it is a 'type' device, 0 otherwise.
- */
-static int
-edd_dev_is_type(struct edd_device *edev, const char *type)
-{
- struct edd_info *info = edd_dev_get_info(edev);
-
- if (edev && type && info) {
- if (!strncmp(info->params.host_bus_type, type, strlen(type)) ||
- !strncmp(info->params.interface_type, type, strlen(type)))
- return 1;
- }
- return 0;
-}
-
-/**
- * edd_get_pci_dev() - finds pci_dev that matches edev
- * @edev - edd_device
- *
- * Returns pci_dev if found, or NULL
- */
-static struct pci_dev *
-edd_get_pci_dev(struct edd_device *edev)
-{
- struct edd_info *info = edd_dev_get_info(edev);
-
- if (edd_dev_is_type(edev, "PCI")) {
- return pci_find_slot(info->params.interface_path.pci.bus,
- PCI_DEVFN(info->params.interface_path.pci.slot,
- info->params.interface_path.pci.
- function));
- }
- return NULL;
-}
-
-static int
-edd_create_symlink_to_pcidev(struct edd_device *edev)
-{
-
- struct pci_dev *pci_dev = edd_get_pci_dev(edev);
- if (!pci_dev)
- return 1;
- return sysfs_create_link(&edev->kobj,&pci_dev->dev.kobj,"pci_dev");
-}
-
-/*
- * FIXME - as of 15-Jan-2003, there are some non-"scsi_device"s on the
- * scsi_bus list. The following functions could possibly mis-access
- * memory in that case. This is actually a problem with the SCSI
- * layer, which is being addressed there. Until then, don't use the
- * SCSI functions.
- */
-
-#undef CONFIG_SCSI
-#undef CONFIG_SCSI_MODULE
-#if defined(CONFIG_SCSI) || defined(CONFIG_SCSI_MODULE)
-
-struct edd_match_data {
- struct edd_device * edev;
- struct scsi_device * sd;
-};
-
-/**
- * edd_match_scsidev()
- * @edev - EDD device is a known SCSI device
- * @sd - scsi_device with host who's parent is a PCI controller
- *
- * returns 1 if a match is found, 0 if not.
- */
-static int edd_match_scsidev(struct device * dev, void * d)
-{
- struct edd_match_data * data = (struct edd_match_data *)d;
- struct edd_info *info = edd_dev_get_info(data->edev);
- struct scsi_device * sd = to_scsi_device(dev);
-
- if (info) {
- if ((sd->channel == info->params.interface_path.pci.channel) &&
- (sd->id == info->params.device_path.scsi.id) &&
- (sd->lun == info->params.device_path.scsi.lun)) {
- data->sd = sd;
- return 1;
- }
- }
- return 0;
-}
-
-/**
- * edd_find_matching_device()
- * @edev - edd_device to match
- *
- * Search the SCSI devices for a drive that matches the EDD
- * device descriptor we have. If we find a match, return it,
- * otherwise, return NULL.
- */
-
-static struct scsi_device *
-edd_find_matching_scsi_device(struct edd_device *edev)
-{
- struct edd_match_data data;
- struct bus_type * scsi_bus = find_bus("scsi");
-
- if (!scsi_bus) {
- return NULL;
- }
-
- data.edev = edev;
-
- if (edd_dev_is_type(edev, "SCSI")) {
- if (bus_for_each_dev(scsi_bus,NULL,&data,edd_match_scsidev))
- return data.sd;
- }
- return NULL;
-}
-
-static int
-edd_create_symlink_to_scsidev(struct edd_device *edev)
-{
- struct pci_dev *pci_dev;
- int rc = -EINVAL;
-
- pci_dev = edd_get_pci_dev(edev);
- if (pci_dev) {
- struct scsi_device * sdev = edd_find_matching_scsi_device(edev);
- if (sdev && get_device(&sdev->sdev_driverfs_dev)) {
- rc = sysfs_create_link(&edev->kobj,
- &sdev->sdev_driverfs_dev.kobj,
- "disc");
- put_device(&sdev->sdev_driverfs_dev);
- }
- }
- return rc;
-}
-
-#else
-static int
-edd_create_symlink_to_scsidev(struct edd_device *edev)
-{
- return -ENOSYS;
-}
-#endif
-
-
-static inline void
-edd_device_unregister(struct edd_device *edev)
-{
- kobject_unregister(&edev->kobj);
-}
-
-static void edd_populate_dir(struct edd_device * edev)
-{
- struct edd_attribute * attr;
- int error = 0;
- int i;
-
- for (i = 0; (attr = edd_attrs[i]) && !error; i++) {
- if (!attr->test ||
- (attr->test && attr->test(edev)))
- error = sysfs_create_file(&edev->kobj,&attr->attr);
- }
-
- if (!error) {
- edd_create_symlink_to_pcidev(edev);
- edd_create_symlink_to_scsidev(edev);
- }
-}
-
-static int
-edd_device_register(struct edd_device *edev, int i)
-{
- int error;
-
- if (!edev)
- return 1;
- memset(edev, 0, sizeof (*edev));
- edd_dev_set_info(edev, &edd[i]);
- snprintf(edev->kobj.name, EDD_DEVICE_NAME_SIZE, "int13_dev%02x",
- edd[i].device);
- kobj_set_kset_s(edev,edd_subsys);
- error = kobject_register(&edev->kobj);
- if (!error)
- edd_populate_dir(edev);
- return error;
-}
-
-/**
- * edd_init() - creates sysfs tree of EDD data
- *
- * This assumes that eddnr and edd were
- * assigned in setup.c already.
- */
-static int __init
-edd_init(void)
-{
- unsigned int i;
- int rc=0;
- struct edd_device *edev;
-
- printk(KERN_INFO "BIOS EDD facility v%s, %d devices found\n",
- EDD_VERSION, eddnr);
- printk(KERN_INFO "Please report your BIOS at %s\n", REPORT_URL);
-
- if (!eddnr) {
- printk(KERN_INFO "EDD information not available.\n");
- return 1;
- }
-
- rc = firmware_register(&edd_subsys);
- if (rc)
- return rc;
-
- for (i = 0; i < eddnr && i < EDDMAXNR && !rc; i++) {
- edev = kmalloc(sizeof (*edev), GFP_KERNEL);
- if (!edev)
- return -ENOMEM;
-
- rc = edd_device_register(edev, i);
- if (rc) {
- kfree(edev);
- break;
- }
- edd_devices[i] = edev;
- }
-
- if (rc)
- firmware_unregister(&edd_subsys);
- return rc;
-}
-
-static void __exit
-edd_exit(void)
-{
- int i;
- struct edd_device *edev;
-
- for (i = 0; i < eddnr && i < EDDMAXNR; i++) {
- if ((edev = edd_devices[i]))
- edd_device_unregister(edev);
- }
- firmware_unregister(&edd_subsys);
-}
-
-late_initcall(edd_init);
-module_exit(edd_exit);
obj-$(CONFIG_MCA) += mca/
obj-$(CONFIG_EISA) += eisa/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
+obj-y += firmware/
--- /dev/null
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+menu "Firmware Drivers"
+
+config EDD
+ tristate "BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+ Services real mode BIOS calls to determine which disk
+ BIOS tries boot from. This information is then exported via driverfs.
+
+ This option is experimental, but believed to be safe,
+ and most disk controller BIOS vendors do not yet implement this feature.
+
+endmenu
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+obj-$(CONFIG_EDD) += edd.o
--- /dev/null
+/*
+ * linux/arch/i386/kernel/edd.c
+ * Copyright (C) 2002, 2003, 2004 Dell Inc.
+ * by Matt Domsch <Matt_Domsch@dell.com>
+ * disk80 signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
+ * legacy CHS by Patrick J. LoPresti <patl@users.sourceforge.net>
+ *
+ * BIOS Enhanced Disk Drive Services (EDD)
+ * conformant to T13 Committee www.t13.org
+ * projects 1572D, 1484D, 1386D, 1226DT
+ *
+ * This code takes information provided by BIOS EDD calls
+ * fn41 - Check Extensions Present and
+ * fn48 - Get Device Parametes with EDD extensions
+ * made in setup.S, copied to safe structures in setup.c,
+ * and presents it in sysfs.
+ *
+ * Please see http://domsch.com/linux/edd30/results.html for
+ * the list of BIOSs which have been reported to implement EDD.
+ * If you don't see yours listed, please send a report as described there.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Known issues:
+ * - refcounting of struct device objects could be improved.
+ *
+ * TODO:
+ * - Add IDE and USB disk device support
+ * - move edd.[ch] to better locations if/when one is decided
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/blkdev.h>
+#include <linux/edd.h>
+/* FIXME - this really belongs in include/scsi/scsi.h */
+#include <../drivers/scsi/scsi.h>
+#include <../drivers/scsi/hosts.h>
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to BIOS EDD information");
+MODULE_LICENSE("GPL");
+
+#define EDD_VERSION "0.13 2004-Mar-09"
+#define EDD_DEVICE_NAME_SIZE 16
+#define REPORT_URL "http://linux.dell.com/edd/results.html"
+
+#define left (PAGE_SIZE - (p - buf) - 1)
+
+struct edd_device {
+ struct edd_info *info;
+ struct kobject kobj;
+};
+
+struct edd_attribute {
+ struct attribute attr;
+ ssize_t(*show) (struct edd_device * edev, char *buf);
+ int (*test) (struct edd_device * edev);
+};
+
+/* forward declarations */
+static int edd_dev_is_type(struct edd_device *edev, const char *type);
+static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
+
+static struct edd_device *edd_devices[EDDMAXNR];
+
+#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
+struct edd_attribute edd_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .show = _show, \
+ .test = _test, \
+};
+
+static inline struct edd_info *
+edd_dev_get_info(struct edd_device *edev)
+{
+ return edev->info;
+}
+
+static inline void
+edd_dev_set_info(struct edd_device *edev, struct edd_info *info)
+{
+ edev->info = info;
+}
+
+#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
+#define to_edd_device(obj) container_of(obj,struct edd_device,kobj)
+
+static ssize_t
+edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
+{
+ struct edd_device *dev = to_edd_device(kobj);
+ struct edd_attribute *edd_attr = to_edd_attr(attr);
+ ssize_t ret = 0;
+
+ if (edd_attr->show)
+ ret = edd_attr->show(dev, buf);
+ return ret;
+}
+
+static struct sysfs_ops edd_attr_ops = {
+ .show = edd_attr_show,
+};
+
+static ssize_t
+edd_show_host_bus(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ int i;
+
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 4; i++) {
+ if (isprint(info->params.host_bus_type[i])) {
+ p += scnprintf(p, left, "%c", info->params.host_bus_type[i]);
+ } else {
+ p += scnprintf(p, left, " ");
+ }
+ }
+
+ if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
+ p += scnprintf(p, left, "\tbase_address: %x\n",
+ info->params.interface_path.isa.base_address);
+ } else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
+ !strncmp(info->params.host_bus_type, "PCI", 3)) {
+ p += scnprintf(p, left,
+ "\t%02x:%02x.%d channel: %u\n",
+ info->params.interface_path.pci.bus,
+ info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.function,
+ info->params.interface_path.pci.channel);
+ } else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
+ !strncmp(info->params.host_bus_type, "XPRS", 4) ||
+ !strncmp(info->params.host_bus_type, "HTPT", 4)) {
+ p += scnprintf(p, left,
+ "\tTBD: %llx\n",
+ info->params.interface_path.ibnd.reserved);
+
+ } else {
+ p += scnprintf(p, left, "\tunknown: %llx\n",
+ info->params.interface_path.unknown.reserved);
+ }
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_interface(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ int i;
+
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 8; i++) {
+ if (isprint(info->params.interface_type[i])) {
+ p += scnprintf(p, left, "%c", info->params.interface_type[i]);
+ } else {
+ p += scnprintf(p, left, " ");
+ }
+ }
+ if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
+ p += scnprintf(p, left, "\tdevice: %u lun: %u\n",
+ info->params.device_path.atapi.device,
+ info->params.device_path.atapi.lun);
+ } else if (!strncmp(info->params.interface_type, "ATA", 3)) {
+ p += scnprintf(p, left, "\tdevice: %u\n",
+ info->params.device_path.ata.device);
+ } else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
+ p += scnprintf(p, left, "\tid: %u lun: %llu\n",
+ info->params.device_path.scsi.id,
+ info->params.device_path.scsi.lun);
+ } else if (!strncmp(info->params.interface_type, "USB", 3)) {
+ p += scnprintf(p, left, "\tserial_number: %llx\n",
+ info->params.device_path.usb.serial_number);
+ } else if (!strncmp(info->params.interface_type, "1394", 4)) {
+ p += scnprintf(p, left, "\teui: %llx\n",
+ info->params.device_path.i1394.eui);
+ } else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
+ p += scnprintf(p, left, "\twwid: %llx lun: %llx\n",
+ info->params.device_path.fibre.wwid,
+ info->params.device_path.fibre.lun);
+ } else if (!strncmp(info->params.interface_type, "I2O", 3)) {
+ p += scnprintf(p, left, "\tidentity_tag: %llx\n",
+ info->params.device_path.i2o.identity_tag);
+ } else if (!strncmp(info->params.interface_type, "RAID", 4)) {
+ p += scnprintf(p, left, "\tidentity_tag: %x\n",
+ info->params.device_path.raid.array_number);
+ } else if (!strncmp(info->params.interface_type, "SATA", 4)) {
+ p += scnprintf(p, left, "\tdevice: %u\n",
+ info->params.device_path.sata.device);
+ } else {
+ p += scnprintf(p, left, "\tunknown: %llx %llx\n",
+ info->params.device_path.unknown.reserved1,
+ info->params.device_path.unknown.reserved2);
+ }
+
+ return (p - buf);
+}
+
+/**
+ * edd_show_raw_data() - copies raw data to buffer for userspace to parse
+ *
+ * Returns: number of bytes written, or -EINVAL on failure
+ */
+static ssize_t
+edd_show_raw_data(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ ssize_t len = sizeof (info->params);
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
+ len = info->params.length;
+
+ /* In case of buggy BIOSs */
+ if (len > (sizeof(info->params)))
+ len = sizeof(info->params);
+
+ memcpy(buf, &info->params, len);
+ return len;
+}
+
+static ssize_t
+edd_show_version(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += scnprintf(p, left, "0x%02x\n", info->version);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_disk80_sig(struct edd_device *edev, char *buf)
+{
+ char *p = buf;
+ p += scnprintf(p, left, "0x%08x\n", edd_disk80_sig);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_extensions(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
+ p += scnprintf(p, left, "Fixed disk access\n");
+ }
+ if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
+ p += scnprintf(p, left, "Device locking and ejecting\n");
+ }
+ if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
+ p += scnprintf(p, left, "Enhanced Disk Drive support\n");
+ }
+ if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
+ p += scnprintf(p, left, "64-bit extensions\n");
+ }
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_info_flags(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ if (info->params.info_flags & EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT)
+ p += scnprintf(p, left, "DMA boundary error transparent\n");
+ if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
+ p += scnprintf(p, left, "geometry valid\n");
+ if (info->params.info_flags & EDD_INFO_REMOVABLE)
+ p += scnprintf(p, left, "removable\n");
+ if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
+ p += scnprintf(p, left, "write verify\n");
+ if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
+ p += scnprintf(p, left, "media change notification\n");
+ if (info->params.info_flags & EDD_INFO_LOCKABLE)
+ p += scnprintf(p, left, "lockable\n");
+ if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
+ p += scnprintf(p, left, "no media present\n");
+ if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
+ p += scnprintf(p, left, "use int13 fn50\n");
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_cylinders(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += snprintf(p, left, "0x%x\n", info->legacy_cylinders);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_heads(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += snprintf(p, left, "0x%x\n", info->legacy_heads);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_sectors(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += snprintf(p, left, "0x%x\n", info->legacy_sectors);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_cylinders(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += scnprintf(p, left, "0x%x\n", info->params.num_default_cylinders);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_heads(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += scnprintf(p, left, "0x%x\n", info->params.num_default_heads);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_sectors_per_track(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += scnprintf(p, left, "0x%x\n", info->params.sectors_per_track);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_sectors(struct edd_device *edev, char *buf)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf) {
+ return -EINVAL;
+ }
+
+ p += scnprintf(p, left, "0x%llx\n", info->params.number_of_sectors);
+ return (p - buf);
+}
+
+
+/*
+ * Some device instances may not have all the above attributes,
+ * or the attribute values may be meaningless (i.e. if
+ * the device is < EDD 3.0, it won't have host_bus and interface
+ * information), so don't bother making files for them. Likewise
+ * if the default_{cylinders,heads,sectors_per_track} values
+ * are zero, the BIOS doesn't provide sane values, don't bother
+ * creating files for them either.
+ */
+
+static int
+edd_has_legacy_cylinders(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return -EINVAL;
+ return info->legacy_cylinders > 0;
+}
+
+static int
+edd_has_legacy_heads(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return -EINVAL;
+ return info->legacy_heads > 0;
+}
+
+static int
+edd_has_legacy_sectors(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return -EINVAL;
+ return info->legacy_sectors > 0;
+}
+
+static int
+edd_has_default_cylinders(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return -EINVAL;
+ return info->params.num_default_cylinders > 0;
+}
+
+static int
+edd_has_default_heads(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return -EINVAL;
+ return info->params.num_default_heads > 0;
+}
+
+static int
+edd_has_default_sectors_per_track(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return -EINVAL;
+ return info->params.sectors_per_track > 0;
+}
+
+static int
+edd_has_edd30(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ int i, nonzero_path = 0;
+ char c;
+
+ if (!edev || !info)
+ return 0;
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+ return 0;
+ }
+
+ for (i = 30; i <= 73; i++) {
+ c = *(((uint8_t *) info) + i + 4);
+ if (c) {
+ nonzero_path++;
+ break;
+ }
+ }
+ if (!nonzero_path) {
+ return 0;
+ }
+
+ return 1;
+}
+
+static int
+edd_has_disk80_sig(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return 0;
+ return info->device == 0x80;
+}
+
+static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data, NULL);
+static EDD_DEVICE_ATTR(version, 0444, edd_show_version, NULL);
+static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions, NULL);
+static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags, NULL);
+static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors, NULL);
+static EDD_DEVICE_ATTR(legacy_cylinders, 0444, edd_show_legacy_cylinders,
+ edd_has_legacy_cylinders);
+static EDD_DEVICE_ATTR(legacy_heads, 0444, edd_show_legacy_heads,
+ edd_has_legacy_heads);
+static EDD_DEVICE_ATTR(legacy_sectors, 0444, edd_show_legacy_sectors,
+ edd_has_legacy_sectors);
+static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders,
+ edd_has_default_cylinders);
+static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads,
+ edd_has_default_heads);
+static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
+ edd_show_default_sectors_per_track,
+ edd_has_default_sectors_per_track);
+static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface, edd_has_edd30);
+static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus, edd_has_edd30);
+static EDD_DEVICE_ATTR(mbr_signature, 0444, edd_show_disk80_sig, edd_has_disk80_sig);
+
+
+/* These are default attributes that are added for every edd
+ * device discovered.
+ */
+static struct attribute * def_attrs[] = {
+ &edd_attr_raw_data.attr,
+ &edd_attr_version.attr,
+ &edd_attr_extensions.attr,
+ &edd_attr_info_flags.attr,
+ &edd_attr_sectors.attr,
+ NULL,
+};
+
+/* These attributes are conditional and only added for some devices. */
+static struct edd_attribute * edd_attrs[] = {
+ &edd_attr_legacy_cylinders,
+ &edd_attr_legacy_heads,
+ &edd_attr_legacy_sectors,
+ &edd_attr_default_cylinders,
+ &edd_attr_default_heads,
+ &edd_attr_default_sectors_per_track,
+ &edd_attr_interface,
+ &edd_attr_host_bus,
+ &edd_attr_mbr_signature,
+ NULL,
+};
+
+/**
+ * edd_release - free edd structure
+ * @kobj: kobject of edd structure
+ *
+ * This is called when the refcount of the edd structure
+ * reaches 0. This should happen right after we unregister,
+ * but just in case, we use the release callback anyway.
+ */
+
+static void edd_release(struct kobject * kobj)
+{
+ struct edd_device * dev = to_edd_device(kobj);
+ kfree(dev);
+}
+
+static struct kobj_type ktype_edd = {
+ .release = edd_release,
+ .sysfs_ops = &edd_attr_ops,
+ .default_attrs = def_attrs,
+};
+
+static decl_subsys(edd,&ktype_edd,NULL);
+
+
+/**
+ * edd_dev_is_type() - is this EDD device a 'type' device?
+ * @edev
+ * @type - a host bus or interface identifier string per the EDD spec
+ *
+ * Returns 1 (TRUE) if it is a 'type' device, 0 otherwise.
+ */
+static int
+edd_dev_is_type(struct edd_device *edev, const char *type)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+
+ if (edev && type && info) {
+ if (!strncmp(info->params.host_bus_type, type, strlen(type)) ||
+ !strncmp(info->params.interface_type, type, strlen(type)))
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * edd_get_pci_dev() - finds pci_dev that matches edev
+ * @edev - edd_device
+ *
+ * Returns pci_dev if found, or NULL
+ */
+static struct pci_dev *
+edd_get_pci_dev(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+
+ if (edd_dev_is_type(edev, "PCI")) {
+ return pci_find_slot(info->params.interface_path.pci.bus,
+ PCI_DEVFN(info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.
+ function));
+ }
+ return NULL;
+}
+
+static int
+edd_create_symlink_to_pcidev(struct edd_device *edev)
+{
+
+ struct pci_dev *pci_dev = edd_get_pci_dev(edev);
+ if (!pci_dev)
+ return 1;
+ return sysfs_create_link(&edev->kobj,&pci_dev->dev.kobj,"pci_dev");
+}
+
+/*
+ * FIXME - as of 15-Jan-2003, there are some non-"scsi_device"s on the
+ * scsi_bus list. The following functions could possibly mis-access
+ * memory in that case. This is actually a problem with the SCSI
+ * layer, which is being addressed there. Until then, don't use the
+ * SCSI functions.
+ */
+
+#undef CONFIG_SCSI
+#undef CONFIG_SCSI_MODULE
+#if defined(CONFIG_SCSI) || defined(CONFIG_SCSI_MODULE)
+
+struct edd_match_data {
+ struct edd_device * edev;
+ struct scsi_device * sd;
+};
+
+/**
+ * edd_match_scsidev()
+ * @edev - EDD device is a known SCSI device
+ * @sd - scsi_device with host who's parent is a PCI controller
+ *
+ * returns 1 if a match is found, 0 if not.
+ */
+static int edd_match_scsidev(struct device * dev, void * d)
+{
+ struct edd_match_data * data = (struct edd_match_data *)d;
+ struct edd_info *info = edd_dev_get_info(data->edev);
+ struct scsi_device * sd = to_scsi_device(dev);
+
+ if (info) {
+ if ((sd->channel == info->params.interface_path.pci.channel) &&
+ (sd->id == info->params.device_path.scsi.id) &&
+ (sd->lun == info->params.device_path.scsi.lun)) {
+ data->sd = sd;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/**
+ * edd_find_matching_device()
+ * @edev - edd_device to match
+ *
+ * Search the SCSI devices for a drive that matches the EDD
+ * device descriptor we have. If we find a match, return it,
+ * otherwise, return NULL.
+ */
+
+static struct scsi_device *
+edd_find_matching_scsi_device(struct edd_device *edev)
+{
+ struct edd_match_data data;
+ struct bus_type * scsi_bus = find_bus("scsi");
+
+ if (!scsi_bus) {
+ return NULL;
+ }
+
+ data.edev = edev;
+
+ if (edd_dev_is_type(edev, "SCSI")) {
+ if (bus_for_each_dev(scsi_bus,NULL,&data,edd_match_scsidev))
+ return data.sd;
+ }
+ return NULL;
+}
+
+static int
+edd_create_symlink_to_scsidev(struct edd_device *edev)
+{
+ struct pci_dev *pci_dev;
+ int rc = -EINVAL;
+
+ pci_dev = edd_get_pci_dev(edev);
+ if (pci_dev) {
+ struct scsi_device * sdev = edd_find_matching_scsi_device(edev);
+ if (sdev && get_device(&sdev->sdev_driverfs_dev)) {
+ rc = sysfs_create_link(&edev->kobj,
+ &sdev->sdev_driverfs_dev.kobj,
+ "disc");
+ put_device(&sdev->sdev_driverfs_dev);
+ }
+ }
+ return rc;
+}
+
+#else
+static int
+edd_create_symlink_to_scsidev(struct edd_device *edev)
+{
+ return -ENOSYS;
+}
+#endif
+
+
+static inline void
+edd_device_unregister(struct edd_device *edev)
+{
+ kobject_unregister(&edev->kobj);
+}
+
+static void edd_populate_dir(struct edd_device * edev)
+{
+ struct edd_attribute * attr;
+ int error = 0;
+ int i;
+
+ for (i = 0; (attr = edd_attrs[i]) && !error; i++) {
+ if (!attr->test ||
+ (attr->test && attr->test(edev)))
+ error = sysfs_create_file(&edev->kobj,&attr->attr);
+ }
+
+ if (!error) {
+ edd_create_symlink_to_pcidev(edev);
+ edd_create_symlink_to_scsidev(edev);
+ }
+}
+
+static int
+edd_device_register(struct edd_device *edev, int i)
+{
+ int error;
+
+ if (!edev)
+ return 1;
+ memset(edev, 0, sizeof (*edev));
+ edd_dev_set_info(edev, &edd[i]);
+ snprintf(edev->kobj.name, EDD_DEVICE_NAME_SIZE, "int13_dev%02x",
+ edd[i].device);
+ kobj_set_kset_s(edev,edd_subsys);
+ error = kobject_register(&edev->kobj);
+ if (!error)
+ edd_populate_dir(edev);
+ return error;
+}
+
+/**
+ * edd_init() - creates sysfs tree of EDD data
+ *
+ * This assumes that eddnr and edd were
+ * assigned in setup.c already.
+ */
+static int __init
+edd_init(void)
+{
+ unsigned int i;
+ int rc=0;
+ struct edd_device *edev;
+
+ printk(KERN_INFO "BIOS EDD facility v%s, %d devices found\n",
+ EDD_VERSION, eddnr);
+ printk(KERN_INFO "Please report your BIOS at %s\n", REPORT_URL);
+
+ if (!eddnr) {
+ printk(KERN_INFO "EDD information not available.\n");
+ return 1;
+ }
+
+ rc = firmware_register(&edd_subsys);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < eddnr && i < EDDMAXNR && !rc; i++) {
+ edev = kmalloc(sizeof (*edev), GFP_KERNEL);
+ if (!edev)
+ return -ENOMEM;
+
+ rc = edd_device_register(edev, i);
+ if (rc) {
+ kfree(edev);
+ break;
+ }
+ edd_devices[i] = edev;
+ }
+
+ if (rc)
+ firmware_unregister(&edd_subsys);
+ return rc;
+}
+
+static void __exit
+edd_exit(void)
+{
+ int i;
+ struct edd_device *edev;
+
+ for (i = 0; i < eddnr && i < EDDMAXNR; i++) {
+ if ((edev = edd_devices[i]))
+ edd_device_unregister(edev);
+ }
+ firmware_unregister(&edd_subsys);
+}
+
+late_initcall(edd_init);
+module_exit(edd_exit);
projects / linux / commitdiff