[PATCH] sh: sh-sci updates

sh-sci updates all around the board.  Support for the newly added subtypes,
some compilation cleanups, etc.

Signed-off-by: Paul Mundt <paul.mundt@nokia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a6639f467672f6a30bd3f728bfb1615fe8a9ce1b..b44e820a6d8b007487be1115f59cb3c8b1a48086 100644 (file)
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -3,7 +3,7 @@
  *
  * SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
  *
- *  Copyright (C) 2002, 2003  Paul Mundt
+ *  Copyright (C) 2002, 2003, 2004  Paul Mundt
  *
  * based off of the old drivers/char/sh-sci.c by:
  *
@@ -18,7 +18,8 @@
  * for more details.
  */
 
-#define DEBUG
+#undef DEBUG
+
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/errno.h>
@@ -332,7 +333,7 @@ static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
 
 #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
 #if defined(CONFIG_CPU_SH3)
-/* For SH7707, SH7709, SH7709A, SH7729, SH7300*/
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
        unsigned int fcr_val = 0;
@@ -798,7 +799,7 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void *
        if ((phase == CPUFREQ_POSTCHANGE) ||
            (phase == CPUFREQ_RESUMECHANGE)){
                for (i = 0; i < SCI_NPORTS; i++) {
-                       struct uart_port *port = &sci_ports[i];
+                       struct uart_port *port = &sci_ports[i].port;
 
                        /*
                         * Update the uartclk per-port if frequency has
@@ -1139,6 +1140,35 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .irqs           = SCI_IRQS,
                .init_pins      = sci_init_pins_sci,
        },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+       {
+               .port   = {
+                       .membase        = (void *)SCIF0,
+                       .mapbase        = SCIF0,
+                       .iotype         = SERIAL_IO_MEM,
+                       .irq            = 55,
+                       .ops            = &sci_uart_ops,
+                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .line           = 0,
+               },
+               .type           = PORT_SCIF,
+               .irqs           = SH3_IRDA_IRQS,
+               .init_pins      = sci_init_pins_scif,
+       },
+       {
+               .port   = {
+                       .membase        = (void *)SCIF2,
+                       .mapbase        = SCIF2,
+                       .iotype         = SERIAL_IO_MEM,
+                       .irq            = 59,
+                       .ops            = &sci_uart_ops,
+                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .line           = 1,
+               },
+               .type           = PORT_SCIF,
+               .irqs           = SH3_SCIF_IRQS,
+               .init_pins      = sci_init_pins_scif,
+       }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
        {
                .port   = {
@@ -1197,6 +1227,21 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .irqs           = SH7300_SCIF0_IRQS,
                .init_pins      = sci_init_pins_scif,
        },
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+       {
+               .port   = {
+                       .membase        = (void *)0xffe00000,
+                       .mapbase        = 0xffe00000,
+                       .iotype         = SERIAL_IO_MEM,
+                       .irq            = 25,
+                       .ops            = &sci_uart_ops,
+                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .line           = 0,
+               },
+               .type           = PORT_SCIF,
+               .irqs           = SH73180_SCIF_IRQS,
+               .init_pins      = sci_init_pins_scif,
+       },
 #elif defined(CONFIG_SH_RTS7751R2D)
        {
                .port   = {
@@ -1284,6 +1329,21 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .irqs           = SH7760_SCIF2_IRQS,
                .init_pins      = sci_init_pins_scif,
        },
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+       {
+               .port   = {
+                       .membase        = (void *)0xffe80000,
+                       .mapbase        = 0xffe80000,
+                       .iotype         = SERIAL_IO_MEM,
+                       .irq            = 43,
+                       .ops            = &sci_uart_ops,
+                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .line           = 0,
+               },
+               .type           = PORT_SCIF,
+               .irqs           = SH4_SCIF_IRQS,
+               .init_pins      = sci_init_pins_scif,
+       },
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
        {
                .port   = {
@@ -1551,7 +1611,7 @@ static struct console kgdb_console = {
 /* Register the KGDB console so we get messages (d'oh!) */
 static int __init kgdb_console_init(void)
 {
-        register_console(&kgdb_console);
+       register_console(&kgdb_console);
        return 0;
 }
 

diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index bf248f18a4ed83551bda2209eb0920423afcab19..2892169eff0544c52b6fee7847a9c7b192f37c49 100644 (file)
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -38,6 +38,7 @@
 #define SH7760_SCIF1_IRQS { 72, 73, 75, 74 }
 #define SH7760_SCIF2_IRQS { 76, 77, 79, 78 }
 #define SH7300_SCIF0_IRQS {80,  80,  80,  80 }
+#define SH73180_SCIF_IRQS {80,  81,  83,  82 }
 #define H8300H_SCI_IRQS0 {52, 53, 54,   0 }
 #define H8300H_SCI_IRQS1 {56, 57, 58,   0 }
 #define H8300H_SCI_IRQS2 {60, 61, 62,   0 }
@@ -57,6 +58,21 @@
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_AND_SCIF
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCIF0         0xA4400000
+# define SCIF2         0xA4410000
+# define SCSMR_Ir      0xA44A0000
+# define IRDA_SCIF     SCIF0
+# define SCI_NPORTS 2
+# define SCPCR 0xA4000116
+# define SCPDR 0xA4000136
+
+/* Set the clock source,
+ * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
+ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
+ */
+# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
+# define SCIF_ONLY
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCI_NPORTS 1
 # define SCSPTR1 0xffe0001c /* 8  bit SCI */
@@ -87,6 +103,19 @@
 # define SCPDR  0xA4050136        /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+# define SCI_NPORTS 1
+# define SCPDR  0xA4050138        /* 16 bit SCIF */
+# define SCSPTR2 SCPDR
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port)  0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+# define SCI_NPORTS 1
+# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
 # define SCI_NPORTS 2
 # define SCSPTR1 0xffe00020 /* 16 bit SCIF */
@@ -152,16 +181,16 @@
 #define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER)
 
 /* SCxSR SCIF */
-#define SCIF_ER    0x0080 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_TEND  0x0040 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_TDFE  0x0020 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_BRK   0x0010 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_FER   0x0008 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_PER   0x0004 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_RDF   0x0002 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_DR    0x0001 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_ER    0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_TEND  0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_TDFE  0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_BRK   0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_FER   0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_PER   0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_RDF   0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_DR    0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 #define SCIF_ORER    0x0200
 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 #define SCIF_RFDC_MASK 0x007f
@@ -190,7 +219,7 @@
 # define SCxSR_ERRORS(port)            SCIF_ERRORS
 # define SCxSR_RDxF(port)               SCIF_RDF
 # define SCxSR_TDxE(port)               SCIF_TDFE
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCxSR_ORER(port)              SCIF_ORER
 #else
 # define SCxSR_ORER(port)              0x0000
@@ -198,12 +227,13 @@
 # define SCxSR_FER(port)               SCIF_FER
 # define SCxSR_PER(port)               SCIF_PER
 # define SCxSR_BRK(port)               SCIF_BRK
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
 # define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
 # define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
 # define SCxSR_BREAK_CLEAR(port)        (sci_in(port,SCxSR)&0xffe3)
 #else
+/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */
 # define SCxSR_RDxF_CLEAR(port)                0x00fc
 # define SCxSR_ERROR_CLEAR(port)       0x0073
 # define SCxSR_TDxE_CLEAR(port)                0x00df
@@ -307,7 +337,7 @@ struct sci_port {
   }
 
 #ifdef CONFIG_CPU_SH3
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -333,7 +363,7 @@ struct sci_port {
   CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
 SCIF_FNS(SCSCR,  0x08, 16)
@@ -422,7 +452,18 @@ static inline int sci_rxd_in(struct uart_port *port)
                return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
        return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+       if (port->mapbase == SCIF0)
+               return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+       if (port->mapbase == SCIF2)
+               return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+       return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+      defined(CONFIG_CPU_SUBTYPE_SH4_202)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 #ifndef SCIF_ONLY
@@ -452,6 +493,11 @@ static inline int sci_rxd_in(struct uart_port *port)
                 return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
         return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+       return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
+}
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
 static inline int sci_rxd_in(struct uart_port *port)
 {
@@ -510,6 +556,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7300)
 #define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1)
 #elif !defined(__H8300H__) && !defined(__H8300S__)
 #define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1)
 #else