Select this option if you want your kernel to support ISDN.
-CONFIG_ISDN
- This driver allows you to use an ISDN-card for networking
- connections and as dialin/out device. The isdn-tty's have a built
- in AT-compatible modem emulator. Network devices support autodial,
- channel-bundling, callback and caller-authentication without having
- a daemon running. A reduced T.70 protocol is supported with tty's
- suitable for German BTX. On D-Channel, the protocols EDSS1
- (Euro-ISDN) and 1TR6 (German style) are supported. See
- <file:Documentation/isdn/README> for more information.
-
- ISDN support in the linux kernel is moving towards a new API,
- called CAPI (Common ISDN Application Programming Interface).
- Therefore the old ISDN4Linux layer is becoming obsolete. It is
- still usable, though, if you select this option.
-
-CONFIG_ISDN_PPP
- Over digital connections such as ISDN, there is no need to
- synchronize sender and recipient's clocks with start and stop bits
- as is done over analog telephone lines. Instead, one can use
- "synchronous PPP". Saying Y here will include this protocol. This
- protocol is used by Cisco and Sun for example. So you want to say Y
- here if the other end of your ISDN connection supports it. You will
- need a special version of pppd (called ipppd) for using this
- feature. See <file:Documentation/isdn/README.syncppp> and
- <file:Documentation/isdn/syncPPP.FAQ> for more information.
-
-CONFIG_ISDN_MPP
- With synchronous PPP enabled, it is possible to increase throughput
- by bundling several ISDN-connections, using this protocol. See
- <file:Documentation/isdn/README.syncppp> for more information.
-
-CONFIG_ISDN_PPP_VJ
- This enables Van Jacobson header compression for synchronous PPP.
- Say Y if the other end of the connection supports it.
-
-CONFIG_ISDN_PPP_BSDCOMP
- Support for the BSD-Compress compression method for PPP, which uses
- the LZW compression method to compress each PPP packet before it is
- sent over the wire. The machine at the other end of the PPP link
- (usually your ISP) has to support the BSD-Compress compression
- method as well for this to be useful. Even if they don't support it,
- it is safe to say Y here.
-
-CONFIG_ISDN_AUDIO
- If you say Y here, the modem-emulator will support a subset of the
- EIA Class 8 Voice commands. Using a getty with voice-support
- (mgetty+sendfax by gert@greenie.muc.de with an extension, available
- with the ISDN utility package for example), you will be able to use
- your Linux box as an ISDN-answering machine. Of course, this must be
- supported by the lowlevel driver also. Currently, the HiSax driver
- is the only voice-supporting driver. See
- <file:Documentation/isdn/README.audio> for more information.
-
-CONFIG_ISDN_X25
- This feature provides the X.25 protocol over ISDN connections.
- See <file:Documentation/isdn/README.x25> for more information
- if you are thinking about using this.
-
-CONFIG_ISDN_DIVERSION
- This option allows you to use some supplementary diversion
- services in conjunction with the HiSax driver on an EURO/DSS1
- line.
-
- Supported options are CD (call deflection), CFU (Call forward
- unconditional), CFB (Call forward when busy) and CFNR (call forward
- not reachable). Additionally the actual CFU, CFB and CFNR state may
- be interrogated.
-
- The use of CFU, CFB, CFNR and interrogation may be limited to some
- countries. The keypad protocol is still not implemented. CD should
- work in all countries if the service has been subscribed to.
-
- Please read the file <file:Documentation/isdn/README.diversion>.
-
-CONFIG_ISDN_DRV_ICN
- This enables support for two kinds of ISDN-cards made by a German
- company called ICN. 2B is the standard version for a single ISDN
- line with two B-channels, 4B supports two ISDN lines. For running
- this card, additional firmware is necessary, which has to be
- downloaded into the card using a utility which is distributed
- separately. See <file:Documentation/isdn/README> and
- <file:Documentation/isdn/README.icn> for more
- information.
-
-CONFIG_ISDN_DRV_LOOP
- This driver provides a virtual ISDN card. Its primary purpose is
- testing of linklevel features or configuration without getting
- charged by your service-provider for lots of phone calls.
- You need will need the loopctrl utility from the latest isdn4k-utils
- package to set up this driver.
-
-CONFIG_ISDN_DRV_HISAX
- This is a driver supporting the Siemens chipset on various
- ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
- S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
- compatibles).
-
- HiSax is just the name of this driver, not the name of any hardware.
-
- If you have a card with such a chipset, you should say Y here and
- also to the configuration option of the driver for your particular
- card, below.
-
-CONFIG_HISAX_EURO
- Say Y or N according to the D-channel protocol which your local
- telephone service company provides.
-
- The call control protocol E-DSS1 is used in most European countries.
- If unsure, say Y.
-
-CONFIG_DE_AOC
- If you want that the HiSax hardware driver sends messages to the
- upper level of the isdn code on each AOCD (Advice Of Charge, During
- the call -- transmission of the fee information during a call) and
- on each AOCE (Advice Of Charge, at the End of the call --
- transmission of fee information at the end of the call), say Y here.
- This works only in Germany.
-
-CONFIG_HISAX_NO_SENDCOMPLETE
- If you have trouble with some ugly exchanges or you live in
- Australia select this option.
-
-CONFIG_HISAX_NO_LLC
- If you have trouble with some ugly exchanges try to select this
- option.
-
-CONFIG_HISAX_NO_KEYPAD
- If you like to send special dial strings including * or # without
- using the keypad protocol, select this option.
-
-CONFIG_HISAX_1TR6
- Say Y or N according to the D-channel protocol which your local
- telephone service company provides.
-
- 1TR6 is an old call control protocol which was used in Germany
- before E-DSS1 was established. Nowadays, all new lines in Germany
- use E-DSS1.
-
-CONFIG_HISAX_NI1
- Enable this if you like to use ISDN in US on a NI1 basic rate
- interface.
-
-CONFIG_HISAX_MAX_CARDS
- This option allows you to specify the maximum number of cards which
- the HiSax driver will be able to handle.
-
-CONFIG_HISAX_16_0
- This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
- and many compatibles.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port/shmem settings.
-
-CONFIG_HISAX_16_3
- This enables HiSax support for the Teles ISDN-cards S0-16.3 the
- Teles/Creatix PnP and the Teles PCMCIA.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_TELESPCI
- This enables HiSax support for the Teles PCI.
- See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-CONFIG_HISAX_S0BOX
- This enables HiSax support for the Teles/Creatix parallel port
- S0BOX. See <file:Documentation/isdn/README.HiSax> on how to
- configure it.
-
-CONFIG_HISAX_AVM_A1
- This enables HiSax support for the AVM A1 (aka "Fritz").
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_FRITZPCI
- This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
- See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-CONFIG_HISAX_AVM_A1_PCMCIA
- This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
- See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-CONFIG_HISAX_ELSA
- This enables HiSax support for the Elsa Mircolink ISA cards, for the
- Elsa Quickstep series cards and Elsa PCMCIA.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_IX1MICROR2
- This enables HiSax support for the ITK ix1-micro Revision 2 card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_DIEHLDIVA
- This enables HiSax support for the Eicon.Diehl Diva none PRO
- versions passive ISDN cards.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_ASUSCOM
- This enables HiSax support for the AsusCom and their OEM versions
- passive ISDN ISA cards.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_TELEINT
- This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_HFCS
- This enables HiSax support for the HFC-S 2BDS0 based cards, like
- teles 16.3c.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_SEDLBAUER
- This enables HiSax support for the Sedlbauer passive ISDN cards.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using the different cards, a different D-channel protocol, or
- non-standard IRQ/port settings.
-
-CONFIG_HISAX_SPORTSTER
- This enables HiSax support for the USR Sportster internal TA card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_MIC
- This enables HiSax support for the ITH MIC card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_NETJET
- This enables HiSax support for the NetJet from Traverse
- Technologies.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_NETJET_U
- This enables HiSax support for the Netspider U interface ISDN card
- from Traverse Technologies.
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_NICCY
- This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_ISURF
- This enables HiSax support for the Siemens I-Talk/I-Surf card with
- ISAR chip.
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_HSTSAPHIR
- This enables HiSax support for the HST Saphir card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_BKM_A4T
- This enables HiSax support for the Telekom A4T card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_SCT_QUADRO
- This enables HiSax support for the Scitel Quadro card.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_GAZEL
- This enables HiSax support for the Gazel cards.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_HFC_PCI
- This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
-
- For more informations see under
- <file:Documentation/isdn/README.hfc-pci>.
-
-CONFIG_HISAX_W6692
- This enables HiSax support for Winbond W6692 based PCI ISDN cards.
-
- See <file:Documentation/isdn/README.HiSax> on how to configure it
- using a different D-channel protocol, or non-standard IRQ/port
- settings.
-
-CONFIG_HISAX_HFC_SX
- This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
- cards. This code is not finished yet.
-
-CONFIG_HISAX_AMD7930
- This enables HiSax support for the AMD7930 chips on some SPARCs.
- This code is not finished yet.
-
-CONFIG_HISAX_DEBUG
- This enables debugging code in the new-style HiSax drivers, i.e.
- the ST5481 USB driver currently.
- If in doubt, say yes.
-
-CONFIG_HISAX_ELSA_CS
- This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
- card.
-
-CONFIG_HISAX_SEDLBAUER_CS
- This enables the PCMCIA client driver for the Sedlbauer Speed Star
- and Speed Star II cards.
-
-CONFIG_HISAX_ST5481
- This enables the driver for ST5481 based USB ISDN adapters,
- e.g. the BeWan Gazel 128 USB
-
-CONFIG_HISAX_FRITZ_PCIPNP
- This enables the driver for the AVM Fritz!Card PCI, Fritz!Card PCI v2
- and Fritz!Card PnP.
- (the latter also needs you to select "ISA Plug and Play support"
- from the menu "Plug and Play configuration")
-
-CONFIG_HISAX_FRITZ_CLASSIC
- This enables the driver for the AVM Fritz!Card classic, formerly
- known as AVM A1.
-
-CONFIG_ISDN_DRV_PCBIT
- This enables support for the PCBIT ISDN-card. This card is
- manufactured in Portugal by Octal. For running this card,
- additional firmware is necessary, which has to be downloaded into
- the card using a utility which is distributed separately. See
- <file:Documentation/isdn/README> and
- <file:Documentation/isdn/README.pcbit> for more information.
-
-CONFIG_ISDN_DRV_SC
- This enables support for the Spellcaster BRI ISDN boards. This
- driver currently builds only in a modularized version ( = code which
- can be inserted in and removed from the running kernel whenever you
- want, details in <file:Documentation/modules.txt>); the module will
- be called sc.o. See <file:Documentation/isdn/README.sc> and
- <http://www.spellcast.com/> for more information.
-
-CONFIG_ISDN_DRV_EICON
- Say Y here if you have an Eicon active ISDN card. In order to use
- this card, additional firmware is necessary, which has to be loaded
- into the card using the eiconctrl utility which is part of the
- latest isdn4k-utils package. Please read the file
- <file:Documentation/isdn/README.eicon> for more information.
-
-CONFIG_ISDN_DRV_EICON_OLD
- Say Y here to use your Eicon active ISDN card with ISDN4Linux
- isdn module.
-
-CONFIG_ISDN_DRV_EICON_PCI
- Say Y here if you have an Eicon Diva Server (BRI/PRI/4BRI) ISDN
- card. Please read <file:Documentation/isdn/README.eicon> for more
- information.
-
-CONFIG_ISDN_DRV_EICON_ISA
- Say Y here if you have an old-type Eicon active ISDN card. In order
- to use this card, additional firmware is necessary, which has to be
- loaded into the card using the eiconctrl utility which is part of
- the latest isdn4k-utils package. Please read the file
- <file:Documentation/isdn/README.eicon> for more information.
-
-CONFIG_ISDN_DRV_EICON_DIVAS
- Enable this option if you want the eicon driver as standalone
- version with no interface to the ISDN4Linux isdn module. If you
- say Y here, the eicon module only supports the Diva Server PCI
- cards and will provide its own IDI interface. You should say N
- here.
-
-CONFIG_ISDN_TTY_FAX
- If you say Y here, the modem-emulator will support a subset of the
- Fax Class 1 and 2 commands. Using a getty with fax-support
- (mgetty+sendfax, hylafax), you will be able to use your Linux box as
- an ISDN-fax-machine. This must be supported by the lowlevel driver
- also. See <file:Documentation/isdn/README.fax> for more information.
-
-CONFIG_ISDN_CAPI
- This provides the CAPI (Common ISDN Application Programming
- Interface, a standard making it easy for programs to access ISDN
- hardware, see <http://www.capi.org/>. This is needed for AVM's set
- of active ISDN controllers like B1, T1, M1.
-
-CONFIG_ISDN_CAPI_CAPI20
- This option will provide the CAPI 2.0 interface to userspace
- applications via /dev/capi20. Applications should use the
- standardized libcapi20 to access this functionality. You should say
- Y/M here.
-
-CONFIG_ISDN_CAPI_MIDDLEWARE
- This option will enhance the capabilities of the /dev/capi20
- interface. It will provide a means of moving a data connection,
- established via the usual /dev/capi20 interface to a special tty
- device. If you want to use pppd with pppdcapiplugin to dial up to
- your ISP, say Y here.
-
-CONFIG_ISDN_CAPI_CAPIFS
- This option provides a special file system, similar to /dev/pts with
- device nodes for the special ttys established by using the
- middleware extension above. If you want to use pppd with
- pppdcapiplugin to dial up to your ISP, say Y here.
-
-CONFIG_ISDN_CAPI_CAPIDRV
- This option provides the glue code to hook up CAPI driven cards to
- the legacy isdn4linux link layer. If you have a card which is
- supported by a CAPI driver, but still want to use old features like
- ippp interfaces or ttyI emulation, say Y/M here.
-
-CONFIG_ISDN_DRV_AVMB1_B1ISA
- Enable support for the ISA version of the AVM B1 card.
-
-CONFIG_ISDN_DRV_AVMB1_B1PCI
- Enable support for the PCI version of the AVM B1 card.
-
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4
- Enable support for the V4 version of AVM B1 PCI card.
-
-CONFIG_ISDN_DRV_AVMB1_T1ISA
- Enable support for the AVM T1 T1B card.
- Note: This is a PRI card and handle 30 B-channels.
-
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
- Enable support for the PCMCIA version of the AVM B1 card.
-
-CONFIG_ISDN_DRV_AVMB1_AVM_CS
- Enable the PCMCIA client driver for the AVM B1/M1/M2
- PCMCIA cards.
-
-CONFIG_ISDN_DRV_AVMB1_T1PCI
- Enable support for the AVM T1 T1B card.
- Note: This is a PRI card and handle 30 B-channels.
-
-CONFIG_ISDN_DRV_AVMB1_C4
- Enable support for the AVM C4/C2 PCI cards.
- These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
- If you say Y here, the AVM B1 driver will give verbose reasons for
- disconnecting. This will increase the size of the kernel by 7 KB. If
- unsure, say Y.
-
-CONFIG_ISDN_DRV_ACT2000
- Say Y here if you have an IBM Active 2000 ISDN card. In order to use
- this card, additional firmware is necessary, which has to be loaded
- into the card using a utility which is part of the latest
- isdn4k-utils package. Please read the file
- <file:Documentation/isdn/README.act2000> for more information.
-
-CONFIG_ISDN_DRV_TPAM
- This enables support for the Auvertech TurboPAM ISDN-card.
- For running this card, additional firmware is necessary, which has
- to be downloaded into the card using a utility which is distributed
- separately from the Auvertech's web site: <http://www.auvertech.fr/>.
-
- Please redirect all support questions to support@auvertech.fr.
-
-CONFIG_HYSDN
- Say Y here if you have one of Hypercope's active PCI ISDN cards
- Champ, Ergo and Metro. You will then get a module called hysdn.o.
- Please read the file <file:Documentation/isdn/README.hysdn> for more
- information.
-
-CONFIG_HYSDN_CAPI
- Say Y here if you like to use Hypercope's CAPI 2.0 interface.
-
--- /dev/null
+CONFIG_ISDN_DRV_ACT2000
+ Say Y here if you have an IBM Active 2000 ISDN card. In order to use
+ this card, additional firmware is necessary, which has to be loaded
+ into the card using a utility which is part of the latest
+ isdn4k-utils package. Please read the file
+ <file:Documentation/isdn/README.act2000> for more information.
+
--- /dev/null
+#
+# Config.in for IBM Active 2000 ISDN driver
+#
+
+dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
+
--- /dev/null
+CONFIG_ISDN_CAPI
+ This provides the CAPI (Common ISDN Application Programming
+ Interface, a standard making it easy for programs to access ISDN
+ hardware, see <http://www.capi.org/>. This is needed for AVM's set
+ of active ISDN controllers like B1, T1, M1.
+
+CONFIG_ISDN_CAPI_CAPI20
+ This option will provide the CAPI 2.0 interface to userspace
+ applications via /dev/capi20. Applications should use the
+ standardized libcapi20 to access this functionality. You should say
+ Y/M here.
+
+CONFIG_ISDN_CAPI_MIDDLEWARE
+ This option will enhance the capabilities of the /dev/capi20
+ interface. It will provide a means of moving a data connection,
+ established via the usual /dev/capi20 interface to a special tty
+ device. If you want to use pppd with pppdcapiplugin to dial up to
+ your ISP, say Y here.
+
+CONFIG_ISDN_CAPI_CAPIFS
+ This option provides a special file system, similar to /dev/pts with
+ device nodes for the special ttys established by using the
+ middleware extension above. If you want to use pppd with
+ pppdcapiplugin to dial up to your ISP, say Y here.
+
+CONFIG_ISDN_CAPI_CAPIDRV
+ This option provides the glue code to hook up CAPI driven cards to
+ the legacy isdn4linux link layer. If you have a card which is
+ supported by a CAPI driver, but still want to use old features like
+ ippp interfaces or ttyI emulation, say Y/M here.
+
+CONFIG_ISDN_DRV_AVMB1_B1ISA
+ Enable support for the ISA version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCI
+ Enable support for the PCI version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4
+ Enable support for the V4 version of AVM B1 PCI card.
+
+CONFIG_ISDN_DRV_AVMB1_T1ISA
+ Enable support for the AVM T1 T1B card.
+ Note: This is a PRI card and handle 30 B-channels.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
+ Enable support for the PCMCIA version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_AVM_CS
+ Enable the PCMCIA client driver for the AVM B1/M1/M2
+ PCMCIA cards.
+
+CONFIG_ISDN_DRV_AVMB1_T1PCI
+ Enable support for the AVM T1 T1B card.
+ Note: This is a PRI card and handle 30 B-channels.
+
+CONFIG_ISDN_DRV_AVMB1_C4
+ Enable support for the AVM C4/C2 PCI cards.
+ These cards handle 4/2 BRI ISDN lines (8/4 channels).
+
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+ If you say Y here, the AVM B1 driver will give verbose reasons for
+ disconnecting. This will increase the size of the kernel by 7 KB. If
+ unsure, say Y.
+
--- /dev/null
+#
+# Config.in for the CAPI subsystem
+#
+
+tristate 'CAPI2.0 support' CONFIG_ISDN_CAPI
+if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
+ bool ' Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+ dep_bool ' CAPI2.0 Middleware support (EXPERIMENTAL)' CONFIG_ISDN_CAPI_MIDDLEWARE $CONFIG_EXPERIMENTAL
+ dep_tristate ' CAPI2.0 /dev/capi support' CONFIG_ISDN_CAPI_CAPI20 $CONFIG_ISDN_CAPI
+ if [ "$CONFIG_ISDN_CAPI_MIDDLEWARE" = "y" ]; then
+ dep_mbool ' CAPI2.0 filesystem support' CONFIG_ISDN_CAPI_CAPIFS_BOOL $CONFIG_ISDN_CAPI_CAPI20
+ if [ "$CONFIG_ISDN_CAPI_CAPIFS_BOOL" = "y" ]; then
+ define_tristate CONFIG_ISDN_CAPI_CAPIFS $CONFIG_ISDN_CAPI_CAPI20
+ else
+ define_tristate CONFIG_ISDN_CAPI_CAPIFS n
+ fi
+ fi
+ dep_tristate ' CAPI2.0 capidrv interface support' CONFIG_ISDN_CAPI_CAPIDRV $CONFIG_ISDN_CAPI $CONFIG_ISDN
+fi
+
+# CAPI drivers
+
+if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
+ dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI
+ dep_tristate ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
+ dep_mbool ' AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI
+ dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI
+ dep_tristate ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI
+ dep_tristate ' AVM B1/M1/M2 PCMCIA cs module' CONFIG_ISDN_DRV_AVMB1_AVM_CS $CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_PCMCIA
+ dep_tristate ' AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
+ dep_tristate ' AVM C4/C2 support' CONFIG_ISDN_DRV_AVMB1_C4 $CONFIG_ISDN_CAPI $CONFIG_PCI
+fi
+
--- /dev/null
+CONFIG_ISDN_DRV_EICON
+ Say Y here if you have an Eicon active ISDN card. In order to use
+ this card, additional firmware is necessary, which has to be loaded
+ into the card using the eiconctrl utility which is part of the
+ latest isdn4k-utils package. Please read the file
+ <file:Documentation/isdn/README.eicon> for more information.
+
+CONFIG_ISDN_DRV_EICON_OLD
+ Say Y here to use your Eicon active ISDN card with ISDN4Linux
+ isdn module.
+
+CONFIG_ISDN_DRV_EICON_PCI
+ Say Y here if you have an Eicon Diva Server (BRI/PRI/4BRI) ISDN
+ card. Please read <file:Documentation/isdn/README.eicon> for more
+ information.
+
+CONFIG_ISDN_DRV_EICON_ISA
+ Say Y here if you have an old-type Eicon active ISDN card. In order
+ to use this card, additional firmware is necessary, which has to be
+ loaded into the card using the eiconctrl utility which is part of
+ the latest isdn4k-utils package. Please read the file
+ <file:Documentation/isdn/README.eicon> for more information.
+
+CONFIG_ISDN_DRV_EICON_DIVAS
+ Enable this option if you want the eicon driver as standalone
+ version with no interface to the ISDN4Linux isdn module. If you
+ say Y here, the eicon module only supports the Diva Server PCI
+ cards and will provide its own IDI interface. You should say N
+ here.
+
--- /dev/null
+#
+# Config.in for Eicon active ISDN support
+#
+
+bool 'Eicon active card support' CONFIG_ISDN_DRV_EICON
+if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
+
+ if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "y" ]; then
+ dep_tristate ' Build Eicon driver type standalone' CONFIG_ISDN_DRV_EICON_DIVAS $CONFIG_ISDN $CONFIG_PCI
+ fi
+ if [ "$CONFIG_ISDN_DRV_EICON_DIVAS" != "y" ]; then
+ dep_tristate ' Legacy Eicon driver' CONFIG_ISDN_DRV_EICON_OLD $CONFIG_ISDN
+ if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "n" ]; then
+ dep_bool ' Eicon PCI DIVA Server BRI/PRI/4BRI support' CONFIG_ISDN_DRV_EICON_PCI $CONFIG_PCI
+ bool ' Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
+ fi
+
+ fi
+fi
+
--- /dev/null
+CONFIG_ISDN_DRV_HISAX
+ This is a driver supporting the Siemens chipset on various
+ ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
+ S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
+ compatibles).
+
+ HiSax is just the name of this driver, not the name of any hardware.
+
+ If you have a card with such a chipset, you should say Y here and
+ also to the configuration option of the driver for your particular
+ card, below.
+
+CONFIG_HISAX_EURO
+ Say Y or N according to the D-channel protocol which your local
+ telephone service company provides.
+
+ The call control protocol E-DSS1 is used in most European countries.
+ If unsure, say Y.
+
+CONFIG_DE_AOC
+ If you want that the HiSax hardware driver sends messages to the
+ upper level of the isdn code on each AOCD (Advice Of Charge, During
+ the call -- transmission of the fee information during a call) and
+ on each AOCE (Advice Of Charge, at the End of the call --
+ transmission of fee information at the end of the call), say Y here.
+ This works only in Germany.
+
+CONFIG_HISAX_NO_SENDCOMPLETE
+ If you have trouble with some ugly exchanges or you live in
+ Australia select this option.
+
+CONFIG_HISAX_NO_LLC
+ If you have trouble with some ugly exchanges try to select this
+ option.
+
+CONFIG_HISAX_NO_KEYPAD
+ If you like to send special dial strings including * or # without
+ using the keypad protocol, select this option.
+
+CONFIG_HISAX_1TR6
+ Say Y or N according to the D-channel protocol which your local
+ telephone service company provides.
+
+ 1TR6 is an old call control protocol which was used in Germany
+ before E-DSS1 was established. Nowadays, all new lines in Germany
+ use E-DSS1.
+
+CONFIG_HISAX_NI1
+ Enable this if you like to use ISDN in US on a NI1 basic rate
+ interface.
+
+CONFIG_HISAX_MAX_CARDS
+ This option allows you to specify the maximum number of cards which
+ the HiSax driver will be able to handle.
+
+CONFIG_HISAX_16_0
+ This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
+ and many compatibles.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port/shmem settings.
+
+CONFIG_HISAX_16_3
+ This enables HiSax support for the Teles ISDN-cards S0-16.3 the
+ Teles/Creatix PnP and the Teles PCMCIA.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_TELESPCI
+ This enables HiSax support for the Teles PCI.
+ See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+CONFIG_HISAX_S0BOX
+ This enables HiSax support for the Teles/Creatix parallel port
+ S0BOX. See <file:Documentation/isdn/README.HiSax> on how to
+ configure it.
+
+CONFIG_HISAX_AVM_A1
+ This enables HiSax support for the AVM A1 (aka "Fritz").
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_FRITZPCI
+ This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
+ See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+CONFIG_HISAX_AVM_A1_PCMCIA
+ This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
+ See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+CONFIG_HISAX_ELSA
+ This enables HiSax support for the Elsa Mircolink ISA cards, for the
+ Elsa Quickstep series cards and Elsa PCMCIA.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_IX1MICROR2
+ This enables HiSax support for the ITK ix1-micro Revision 2 card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_DIEHLDIVA
+ This enables HiSax support for the Eicon.Diehl Diva none PRO
+ versions passive ISDN cards.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_ASUSCOM
+ This enables HiSax support for the AsusCom and their OEM versions
+ passive ISDN ISA cards.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_TELEINT
+ This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_HFCS
+ This enables HiSax support for the HFC-S 2BDS0 based cards, like
+ teles 16.3c.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_SEDLBAUER
+ This enables HiSax support for the Sedlbauer passive ISDN cards.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using the different cards, a different D-channel protocol, or
+ non-standard IRQ/port settings.
+
+CONFIG_HISAX_SPORTSTER
+ This enables HiSax support for the USR Sportster internal TA card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_MIC
+ This enables HiSax support for the ITH MIC card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_NETJET
+ This enables HiSax support for the NetJet from Traverse
+ Technologies.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_NETJET_U
+ This enables HiSax support for the Netspider U interface ISDN card
+ from Traverse Technologies.
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_NICCY
+ This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_ISURF
+ This enables HiSax support for the Siemens I-Talk/I-Surf card with
+ ISAR chip.
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_HSTSAPHIR
+ This enables HiSax support for the HST Saphir card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_BKM_A4T
+ This enables HiSax support for the Telekom A4T card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_SCT_QUADRO
+ This enables HiSax support for the Scitel Quadro card.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_GAZEL
+ This enables HiSax support for the Gazel cards.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_HFC_PCI
+ This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
+
+ For more informations see under
+ <file:Documentation/isdn/README.hfc-pci>.
+
+CONFIG_HISAX_W6692
+ This enables HiSax support for Winbond W6692 based PCI ISDN cards.
+
+ See <file:Documentation/isdn/README.HiSax> on how to configure it
+ using a different D-channel protocol, or non-standard IRQ/port
+ settings.
+
+CONFIG_HISAX_HFC_SX
+ This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
+ cards. This code is not finished yet.
+
+CONFIG_HISAX_AMD7930
+ This enables HiSax support for the AMD7930 chips on some SPARCs.
+ This code is not finished yet.
+
+CONFIG_HISAX_DEBUG
+ This enables debugging code in the new-style HiSax drivers, i.e.
+ the ST5481 USB driver currently.
+ If in doubt, say yes.
+
+CONFIG_HISAX_ELSA_CS
+ This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
+ card.
+
+CONFIG_HISAX_SEDLBAUER_CS
+ This enables the PCMCIA client driver for the Sedlbauer Speed Star
+ and Speed Star II cards.
+
+CONFIG_HISAX_ST5481
+ This enables the driver for ST5481 based USB ISDN adapters,
+ e.g. the BeWan Gazel 128 USB
+
+CONFIG_HISAX_FRITZ_PCIPNP
+ This enables the driver for the AVM Fritz!Card PCI, Fritz!Card PCI v2
+ and Fritz!Card PnP.
+ (the latter also needs you to select "ISA Plug and Play support"
+ from the menu "Plug and Play configuration")
+
+CONFIG_HISAX_FRITZ_CLASSIC
+ This enables the driver for the AVM Fritz!Card classic, formerly
+ known as AVM A1.
+
--- /dev/null
+mainmenu_option next_comment
+comment 'Passive ISDN cards'
+dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
+if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
+ comment ' D-channel protocol features'
+ bool ' HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
+ if [ "$CONFIG_HISAX_EURO" != "n" ]; then
+ bool ' Support for german chargeinfo' CONFIG_DE_AOC
+ bool ' Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
+ bool ' Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
+ bool ' Disable keypad protocol option' CONFIG_HISAX_NO_KEYPAD
+ fi
+ bool ' HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
+ bool ' HiSax Support for US NI1' CONFIG_HISAX_NI1
+ int ' Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
+ comment ' HiSax supported cards'
+ bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0
+ bool ' Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
+ bool ' Teles PCI' CONFIG_HISAX_TELESPCI
+ bool ' Teles S0Box' CONFIG_HISAX_S0BOX
+ bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
+ bool ' AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
+ bool ' AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
+ bool ' Elsa cards' CONFIG_HISAX_ELSA
+ bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
+ bool ' Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
+ bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
+ bool ' TELEINT cards' CONFIG_HISAX_TELEINT
+ bool ' HFC-S based cards' CONFIG_HISAX_HFCS
+ bool ' Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
+ bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
+ bool ' MIC card' CONFIG_HISAX_MIC
+ bool ' NETjet card' CONFIG_HISAX_NETJET
+ bool ' NETspider U card' CONFIG_HISAX_NETJET_U
+ bool ' Niccy PnP/PCI card' CONFIG_HISAX_NICCY
+ bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF
+ bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR
+ bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
+ bool ' Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
+ bool ' Gazel cards' CONFIG_HISAX_GAZEL
+ bool ' HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
+ bool ' Winbond W6692 based cards' CONFIG_HISAX_W6692
+ bool ' HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
+ if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
+# bool ' TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
+ if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
+ bool ' Am7930' CONFIG_HISAX_AMD7930
+ fi
+ fi
+ bool ' HiSax debugging' CONFIG_HISAX_DEBUG
+
+ dep_tristate 'Sedlbauer PCMCIA cards' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_PCMCIA
+ dep_tristate 'ELSA PCMCIA MicroLink cards' CONFIG_HISAX_ELSA_CS $CONFIG_PCMCIA
+ dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)' CONFIG_HISAX_ST5481 $CONFIG_HISAX $CONFIG_USB $CONFIG_EXPERIMENTAL
+ dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP $CONFIG_HISAX $CONFIG_EXPERIMENTAL
+ dep_tristate 'AVM Fritz!Card classic support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_CLASSIC $CONFIG_HISAX $CONFIG_EXPERIMENTAL
+ dep_tristate 'HFC PCI support (EXPERIMENTAL)' CONFIG_HISAX_HFCPCI $CONFIG_HISAX $CONFIG_EXPERIMENTAL
+fi
+endmenu
+
--- /dev/null
+CONFIG_HYSDN
+ Say Y here if you have one of Hypercope's active PCI ISDN cards
+ Champ, Ergo and Metro. You will then get a module called hysdn.o.
+ Please read the file <file:Documentation/isdn/README.hysdn> for more
+ information.
+
+CONFIG_HYSDN_CAPI
+ Say Y here if you like to use Hypercope's CAPI 2.0 interface.
+
--- /dev/null
+#
+# Config.in for HYSDN ISDN driver
+#
+
+dep_tristate ' Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)' CONFIG_HYSDN m $CONFIG_PROC_FS
+dep_mbool ' HYSDN CAPI 2.0 support' CONFIG_HYSDN_CAPI $CONFIG_HYSDN $CONFIG_ISDN_CAPI
--- /dev/null
+CONFIG_ISDN
+ This driver allows you to use an ISDN-card for networking
+ connections and as dialin/out device. The isdn-tty's have a built
+ in AT-compatible modem emulator. Network devices support autodial,
+ channel-bundling, callback and caller-authentication without having
+ a daemon running. A reduced T.70 protocol is supported with tty's
+ suitable for German BTX. On D-Channel, the protocols EDSS1
+ (Euro-ISDN) and 1TR6 (German style) are supported. See
+ <file:Documentation/isdn/README> for more information.
+
+ ISDN support in the linux kernel is moving towards a new API,
+ called CAPI (Common ISDN Application Programming Interface).
+ Therefore the old ISDN4Linux layer is becoming obsolete. It is
+ still usable, though, if you select this option.
+
+CONFIG_ISDN_PPP
+ Over digital connections such as ISDN, there is no need to
+ synchronize sender and recipient's clocks with start and stop bits
+ as is done over analog telephone lines. Instead, one can use
+ "synchronous PPP". Saying Y here will include this protocol. This
+ protocol is used by Cisco and Sun for example. So you want to say Y
+ here if the other end of your ISDN connection supports it. You will
+ need a special version of pppd (called ipppd) for using this
+ feature. See <file:Documentation/isdn/README.syncppp> and
+ <file:Documentation/isdn/syncPPP.FAQ> for more information.
+
+CONFIG_ISDN_MPP
+ With synchronous PPP enabled, it is possible to increase throughput
+ by bundling several ISDN-connections, using this protocol. See
+ <file:Documentation/isdn/README.syncppp> for more information.
+
+CONFIG_ISDN_PPP_VJ
+ This enables Van Jacobson header compression for synchronous PPP.
+ Say Y if the other end of the connection supports it.
+
+CONFIG_ISDN_PPP_BSDCOMP
+ Support for the BSD-Compress compression method for PPP, which uses
+ the LZW compression method to compress each PPP packet before it is
+ sent over the wire. The machine at the other end of the PPP link
+ (usually your ISP) has to support the BSD-Compress compression
+ method as well for this to be useful. Even if they don't support it,
+ it is safe to say Y here.
+
+CONFIG_ISDN_AUDIO
+ If you say Y here, the modem-emulator will support a subset of the
+ EIA Class 8 Voice commands. Using a getty with voice-support
+ (mgetty+sendfax by gert@greenie.muc.de with an extension, available
+ with the ISDN utility package for example), you will be able to use
+ your Linux box as an ISDN-answering machine. Of course, this must be
+ supported by the lowlevel driver also. Currently, the HiSax driver
+ is the only voice-supporting driver. See
+ <file:Documentation/isdn/README.audio> for more information.
+
+CONFIG_ISDN_X25
+ This feature provides the X.25 protocol over ISDN connections.
+ See <file:Documentation/isdn/README.x25> for more information
+ if you are thinking about using this.
+
+CONFIG_ISDN_DIVERSION
+ This option allows you to use some supplementary diversion
+ services in conjunction with the HiSax driver on an EURO/DSS1
+ line.
+
+ Supported options are CD (call deflection), CFU (Call forward
+ unconditional), CFB (Call forward when busy) and CFNR (call forward
+ not reachable). Additionally the actual CFU, CFB and CFNR state may
+ be interrogated.
+
+ The use of CFU, CFB, CFNR and interrogation may be limited to some
+ countries. The keypad protocol is still not implemented. CD should
+ work in all countries if the service has been subscribed to.
+
+ Please read the file <file:Documentation/isdn/README.diversion>.
+
+CONFIG_ISDN_TTY_FAX
+ If you say Y here, the modem-emulator will support a subset of the
+ Fax Class 1 and 2 commands. Using a getty with fax-support
+ (mgetty+sendfax, hylafax), you will be able to use your Linux box as
+ an ISDN-fax-machine. This must be supported by the lowlevel driver
+ also. See <file:Documentation/isdn/README.fax> for more information.
+
+CONFIG_ISDN_DRV_LOOP
+ This driver provides a virtual ISDN card. Its primary purpose is
+ testing of linklevel features or configuration without getting
+ charged by your service-provider for lots of phone calls.
+ You need will need the loopctrl utility from the latest isdn4k-utils
+ package to set up this driver.
+
comment 'low-level hardware drivers'
-mainmenu_option next_comment
-comment 'Passive ISDN cards'
-dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
-if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
- comment ' D-channel protocol features'
- bool ' HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
- if [ "$CONFIG_HISAX_EURO" != "n" ]; then
- bool ' Support for german chargeinfo' CONFIG_DE_AOC
- bool ' Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
- bool ' Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
- bool ' Disable keypad protocol option' CONFIG_HISAX_NO_KEYPAD
- fi
- bool ' HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
- bool ' HiSax Support for US NI1' CONFIG_HISAX_NI1
- int ' Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
- comment ' HiSax supported cards'
- bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0
- bool ' Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
- bool ' Teles PCI' CONFIG_HISAX_TELESPCI
- bool ' Teles S0Box' CONFIG_HISAX_S0BOX
- bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
- bool ' AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
- bool ' AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
- bool ' Elsa cards' CONFIG_HISAX_ELSA
- bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
- bool ' Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
- bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
- bool ' TELEINT cards' CONFIG_HISAX_TELEINT
- bool ' HFC-S based cards' CONFIG_HISAX_HFCS
- bool ' Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
- bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
- bool ' MIC card' CONFIG_HISAX_MIC
- bool ' NETjet card' CONFIG_HISAX_NETJET
- bool ' NETspider U card' CONFIG_HISAX_NETJET_U
- bool ' Niccy PnP/PCI card' CONFIG_HISAX_NICCY
- bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF
- bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR
- bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
- bool ' Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
- bool ' Gazel cards' CONFIG_HISAX_GAZEL
- bool ' HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
- bool ' Winbond W6692 based cards' CONFIG_HISAX_W6692
- bool ' HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
- if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-# bool ' TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
- if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
- bool ' Am7930' CONFIG_HISAX_AMD7930
- fi
- fi
- bool ' HiSax debugging' CONFIG_HISAX_DEBUG
-
- dep_tristate 'Sedlbauer PCMCIA cards' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_PCMCIA
- dep_tristate 'ELSA PCMCIA MicroLink cards' CONFIG_HISAX_ELSA_CS $CONFIG_PCMCIA
- dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)' CONFIG_HISAX_ST5481 $CONFIG_HISAX $CONFIG_USB $CONFIG_EXPERIMENTAL
- dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP $CONFIG_HISAX $CONFIG_EXPERIMENTAL
- dep_tristate 'AVM Fritz!Card classic support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_CLASSIC $CONFIG_HISAX $CONFIG_EXPERIMENTAL
- dep_tristate 'HFC PCI support (EXPERIMENTAL)' CONFIG_HISAX_HFCPCI $CONFIG_HISAX $CONFIG_EXPERIMENTAL
-fi
-endmenu
+source drivers/isdn/hisax/Config.in
### Active ISDN cards
mainmenu_option next_comment
comment 'Active ISDN cards'
-dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
-dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
-dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
-dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
-
-bool 'Eicon active card support' CONFIG_ISDN_DRV_EICON
-if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
- if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "y" ]; then
- dep_tristate ' Build Eicon driver type standalone' CONFIG_ISDN_DRV_EICON_DIVAS $CONFIG_ISDN $CONFIG_PCI
- fi
- if [ "$CONFIG_ISDN_DRV_EICON_DIVAS" != "y" ]; then
- dep_tristate ' Legacy Eicon driver' CONFIG_ISDN_DRV_EICON_OLD $CONFIG_ISDN
- if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "n" ]; then
- dep_bool ' Eicon PCI DIVA Server BRI/PRI/4BRI support' CONFIG_ISDN_DRV_EICON_PCI $CONFIG_PCI
- bool ' Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
- fi
- fi
-fi
-
-if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
- dep_tristate 'Auvertech TurboPAM support' CONFIG_ISDN_DRV_TPAM $CONFIG_ISDN $CONFIG_PCI
-fi
-
-# CAPI subsystem
-
-tristate 'CAPI2.0 support' CONFIG_ISDN_CAPI
-if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
- bool ' Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
- dep_bool ' CAPI2.0 Middleware support (EXPERIMENTAL)' CONFIG_ISDN_CAPI_MIDDLEWARE $CONFIG_EXPERIMENTAL
- dep_tristate ' CAPI2.0 /dev/capi support' CONFIG_ISDN_CAPI_CAPI20 $CONFIG_ISDN_CAPI
- if [ "$CONFIG_ISDN_CAPI_MIDDLEWARE" = "y" ]; then
- dep_mbool ' CAPI2.0 filesystem support' CONFIG_ISDN_CAPI_CAPIFS_BOOL $CONFIG_ISDN_CAPI_CAPI20
- if [ "$CONFIG_ISDN_CAPI_CAPIFS_BOOL" = "y" ]; then
- define_tristate CONFIG_ISDN_CAPI_CAPIFS $CONFIG_ISDN_CAPI_CAPI20
- else
- define_tristate CONFIG_ISDN_CAPI_CAPIFS n
- fi
- fi
- dep_tristate ' CAPI2.0 capidrv interface support' CONFIG_ISDN_CAPI_CAPIDRV $CONFIG_ISDN_CAPI $CONFIG_ISDN
-fi
-
-# CAPI drivers
-
-if [ "$CONFIG_ISDN_CAPI" != "n" ]; then
- dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI
- dep_tristate ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
- dep_mbool ' AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI
- dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI
- dep_tristate ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI
- dep_tristate ' AVM B1/M1/M2 PCMCIA cs module' CONFIG_ISDN_DRV_AVMB1_AVM_CS $CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_PCMCIA
- dep_tristate ' AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
- dep_tristate ' AVM C4/C2 support' CONFIG_ISDN_DRV_AVMB1_C4 $CONFIG_ISDN_CAPI $CONFIG_PCI
-fi
-
-# HYSDN
+source drivers/isdn/icn/Config.in
+source drivers/isdn/pcbit/Config.in
+source drivers/isdn/sc/Config.in
+source drivers/isdn/act2000/Config.in
+source drivers/isdn/eicon/Config.in
+source drivers/isdn/tpam/Config.in
+source drivers/isdn/avmb1/Config.in
+source drivers/isdn/hysdn/Config.in
-dep_tristate ' Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)' CONFIG_HYSDN m $CONFIG_PROC_FS
-dep_mbool ' HYSDN CAPI 2.0 support' CONFIG_HYSDN_CAPI $CONFIG_HYSDN $CONFIG_ISDN_CAPI
endmenu
--- /dev/null
+CONFIG_ISDN_DRV_ICN
+ This enables support for two kinds of ISDN-cards made by a German
+ company called ICN. 2B is the standard version for a single ISDN
+ line with two B-channels, 4B supports two ISDN lines. For running
+ this card, additional firmware is necessary, which has to be
+ downloaded into the card using a utility which is distributed
+ separately. See <file:Documentation/isdn/README> and
+ <file:Documentation/isdn/README.icn> for more
+ information.
+
--- /dev/null
+#
+# Config.in for ICN ISDN driver
+#
+
+dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
--- /dev/null
+CONFIG_ISDN_DRV_PCBIT
+ This enables support for the PCBIT ISDN-card. This card is
+ manufactured in Portugal by Octal. For running this card,
+ additional firmware is necessary, which has to be downloaded into
+ the card using a utility which is distributed separately. See
+ <file:Documentation/isdn/README> and
+ <file:Documentation/isdn/README.pcbit> for more information.
+
--- /dev/null
+#
+# Config.in for PCBIT ISDN driver
+#
+
+dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
--- /dev/null
+CONFIG_ISDN_DRV_SC
+ This enables support for the Spellcaster BRI ISDN boards. This
+ driver currently builds only in a modularized version ( = code which
+ can be inserted in and removed from the running kernel whenever you
+ want, details in <file:Documentation/modules.txt>); the module will
+ be called sc.o. See <file:Documentation/isdn/README.sc> and
+ <http://www.spellcast.com/> for more information.
+
--- /dev/null
+#
+# Config.in for Spellcaster ISDN driver
+#
+
+dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
--- /dev/null
+CONFIG_ISDN_DRV_TPAM
+ This enables support for the Auvertech TurboPAM ISDN-card.
+ For running this card, additional firmware is necessary, which has
+ to be downloaded into the card using a utility which is distributed
+ separately from the Auvertech's web site: <http://www.auvertech.fr/>.
+
+ Please redirect all support questions to support@auvertech.fr.
+
--- /dev/null
+#
+# Config.in for Auvertech TurboPAM ISDN driver
+#
+
+if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
+ dep_tristate 'Auvertech TurboPAM support' CONFIG_ISDN_DRV_TPAM $CONFIG_ISDN $CONFIG_PCI
+fi
projects / linux / commitdiff