+++ /dev/null
-/*
- * linux/arch/arm/mach-omap/innovator1510.c
- *
- * Board specific inits for OMAP-1510 Innovator
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/clocks.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
-
-#include "common.h"
-
-extern int omap_gpio_init(void);
-
-void innovator_init_irq(void)
-{
- omap_init_irq();
- omap_gpio_init();
- fpga_init_irq();
-}
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = OMAP1510P1_FPGA_ETHR_START, /* Physical */
- .end = OMAP1510P1_FPGA_ETHR_START + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_ETHER,
- .end = INT_ETHER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &smc91x_device,
-};
-
-static void __init innovator_init(void)
-{
- if (!machine_is_innovator())
- return;
-
- (void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc innovator_io_desc[] __initdata = {
-{ OMAP1510P1_FPGA_BASE, OMAP1510P1_FPGA_START, OMAP1510P1_FPGA_SIZE,
- MT_DEVICE },
-};
-
-static void __init innovator_map_io(void)
-{
- omap_map_io();
- iotable_init(innovator_io_desc, ARRAY_SIZE(innovator_io_desc));
-
- /* Dump the Innovator FPGA rev early - useful info for support. */
- printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510P1_FPGA_REV_HIGH),
- fpga_read(OMAP1510P1_FPGA_REV_LOW),
- fpga_read(OMAP1510P1_FPGA_BOARD_REV));
-}
-
-MACHINE_START(INNOVATOR, "TI-Innovator/OMAP1510")
- MAINTAINER("MontaVista Software, Inc.")
- BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
- BOOT_PARAMS(0x10000100)
- MAPIO(innovator_map_io)
- INITIRQ(innovator_init_irq)
- INIT_MACHINE(innovator_init)
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap/innovator1610.c
- *
- * This file contains Innovator-specific code.
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
-
-#include "common.h"
-
-void
-innovator_init_irq(void)
-{
- omap_init_irq();
-}
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = OMAP1610_ETHR_START, /* Physical */
- .end = OMAP1610_ETHR_START + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0, /* Really GPIO 0 */
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &smc91x_device,
-};
-
-static void __init innovator_init(void)
-{
- if (!machine_is_innovator())
- return;
-
- (void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static struct map_desc innovator_io_desc[] __initdata = {
-{ OMAP1610_ETHR_BASE, OMAP1610_ETHR_START, OMAP1610_ETHR_SIZE,MT_DEVICE },
-{ OMAP1610_NOR_FLASH_BASE, OMAP1610_NOR_FLASH_START, OMAP1610_NOR_FLASH_SIZE,
- MT_DEVICE },
-};
-
-static void __init innovator_map_io(void)
-{
- omap_map_io();
- iotable_init(innovator_io_desc, ARRAY_SIZE(innovator_io_desc));
-}
-
-MACHINE_START(INNOVATOR, "TI-Innovator/OMAP1610")
- MAINTAINER("MontaVista Software, Inc.")
- BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
- BOOT_PARAMS(0x10000100)
- MAPIO(innovator_map_io)
- INITIRQ(innovator_init_irq)
- INIT_MACHINE(innovator_init)
-MACHINE_END
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap/generic.c
- *
- * Modified from innovator.c
- *
- * Code for generic OMAP board. Should work on many OMAP systems where
- * the device drivers take care of all the necessary hardware initialization.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/clocks.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-
-#include "common.h"
-
-static void __init omap_generic_init_irq(void)
-{
- omap_init_irq();
-}
-
-/*
- * Muxes the serial ports on
- */
-static void __init omap_early_serial_init(void)
-{
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
-
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
-
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
-}
-
-static void __init omap_generic_init(void)
-{
- if (!machine_is_omap_generic())
- return;
-
- /*
- * Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
- */
- if (cpu_is_omap1510()) {
- omap_early_serial_init();
- }
-}
-
-static void __init omap_generic_map_io(void)
-{
- omap_map_io();
-}
-
-MACHINE_START(OMAP_GENERIC, "Generic OMAP-1510/1610")
- MAINTAINER("Tony Lindgren <tony@atomide.com>")
- BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
- BOOT_PARAMS(0x10000100)
- MAPIO(omap_generic_map_io)
- INITIRQ(omap_generic_init_irq)
- INIT_MACHINE(omap_generic_init)
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap/omap-perseus2.c
- *
- * Modified from omap-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/clocks.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-
-#include <asm/arch/omap-perseus2.h>
-
-#include "common.h"
-
-void omap_perseus2_init_irq(void)
-{
- omap_init_irq();
-}
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = OMAP730_FPGA_ETHR_START, /* Physical */
- .end = OMAP730_FPGA_ETHR_START + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0,
- .end = 0,
- .flags = INT_ETHER,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &smc91x_device,
-};
-
-static void __init omap_perseus2_init(void)
-{
- if (!machine_is_omap_perseus2())
- return;
-
- (void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
- {OMAP730_FPGA_BASE, OMAP730_FPGA_START, OMAP730_FPGA_SIZE,
- MT_DEVICE},
-};
-
-static void __init omap_perseus2_map_io(void)
-{
- omap_map_io();
- iotable_init(omap_perseus2_io_desc,
- ARRAY_SIZE(omap_perseus2_io_desc));
-
- /* Early, board-dependent init */
-
- /*
- * Hold GSM Reset until needed
- */
- *DSP_M_CTL &= ~1;
-
- /*
- * UARTs -> done automagically by 8250 driver
- */
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- *((volatile __u32 *) OMAP_FLASH_CFG_0) = 0x0000fff3;
- *((volatile __u32 *) OMAP_FLASH_ACFG_0) = 0x00000088;
-
- /*
- * Ethernet support trough the debug board
- * CS1 timings setup
- */
- *((volatile __u32 *) OMAP_FLASH_CFG_1) = 0x0000fff3;
- *((volatile __u32 *) OMAP_FLASH_ACFG_1) = 0x00000000;
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- *((volatile __u32 *) PERSEUS2_IO_CONF_9) &= 0x1FFFFFFF;
-}
-
-MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
- MAINTAINER("Kevin Hilman <k-hilman@ti.com>")
- BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
- BOOT_PARAMS(0x10000100)
- MAPIO(omap_perseus2_map_io)
- INITIRQ(omap_perseus2_init_irq)
- INIT_MACHINE(omap_perseus2_init)
-MACHINE_END
projects / linux / commitdiff