}
DEB_EE(("dev:%p, dmaq:%p, state:%d\n", dev, q, state));
+ DEB_EE(("q->curr:%p\n",q->curr));
/* finish current buffer */
+ if (NULL == q->curr) {
+ DEB_D(("aiii. no current buffer\n"));
+ return;
+ }
+
q->curr->vb.state = state;
do_gettimeofday(&q->curr->vb.ts);
wake_up(&q->curr->vb.done);
fh->dev = dev;
fh->type = type;
- saa7146_video_uops.open(dev,fh);
- if( 0 != BOARD_CAN_DO_VBI(dev) ) {
+ if( fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+ DEB_S(("initializing vbi...\n"));
saa7146_vbi_uops.open(dev,fh);
+ } else {
+ DEB_S(("initializing video...\n"));
+ saa7146_video_uops.open(dev,fh);
}
result = 0;
if (down_interruptible(&saa7146_devices_lock))
return -ERESTARTSYS;
- saa7146_video_uops.release(dev,fh,file);
- if( 0 != BOARD_CAN_DO_VBI(dev) ) {
+ if( fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
saa7146_vbi_uops.release(dev,fh,file);
+ } else {
+ saa7146_video_uops.release(dev,fh,file);
}
module_put(dev->ext->module);
switch (fh->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE: {
- DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun", file, data, (unsigned long)count));
+// DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun", file, data, (unsigned long)count));
return saa7146_video_uops.read(file,data,count,ppos);
}
case V4L2_BUF_TYPE_VBI_CAPTURE: {
- DEB_EE(("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n", file, data, (unsigned long)count));
+// DEB_EE(("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n", file, data, (unsigned long)count));
return saa7146_vbi_uops.read(file,data,count,ppos);
}
break;
{
struct saa7146_vv *vv = dev->vv_data;
- DEB_EE(("dev:%p, name:'%s'\n",dev,name));
+ DEB_EE(("dev:%p, name:'%s', type:%d\n",dev,name,type));
*vid = device_template;
strlcpy(vid->name, name, sizeof(vid->name));
// fixme: -1 should be an insmod parameter *for the extension* (like "video_nr");
if (video_register_device(vid,type,-1) < 0) {
- ERR(("cannot register vbi v4l2 device. skipping.\n"));
+ ERR(("cannot register v4l2 device. skipping.\n"));
return -1;
}
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
/* BXO = 1h, BRS to outbound */
WRITE_RPS1(0xc000008c);
- /* wait for vbi_a */
+ /* wait for vbi_a or vbi_b*/
+ if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+ DEB_D(("...using port b\n"));
+ WRITE_RPS1(CMD_PAUSE | MASK_09);
+ } else {
+ DEB_D(("...using port a\n"));
WRITE_RPS1(CMD_PAUSE | MASK_10);
+ }
/* upload brs */
WRITE_RPS1(CMD_UPLOAD | MASK_08);
/* load brs-control register */
if(signal_pending(current)) {
- DEB_VBI(("aborted.\n"));
+ DEB_VBI(("aborted (rps:0x%08x).\n",saa7146_read(dev,RPS_ADDR1)));
/* stop rps1 for sure */
saa7146_write(dev, MC1, MASK_29);
saa7146_write(dev, MC1, MASK_20);
vv->vbi_streaming = NULL;
+
+ del_timer(&vv->vbi_q.timeout);
+ del_timer(&fh->vbi_read_timeout);
+
+ DEB_VBI(("out\n"));
spin_unlock_irqrestore(&dev->slock, flags);
}
fh->vbi_read_timeout.function = vbi_read_timeout;
fh->vbi_read_timeout.data = (unsigned long)fh;
+ /* fixme: enable this again, if the dvb-c w/ analog module work properly */
+/*
vbi_workaround(dev);
+*/
}
static void vbi_close(struct saa7146_dev *dev, struct saa7146_fh *fh, struct file *file)