If in doubt, say N.
config CPU_FREQ_24_API
- bool "/proc/sys/cpu/ interface (2.4.)"
+ bool "/proc/sys/cpu/ interface (2.4. / OLD)"
depends on CPU_FREQ
- ---help---
+ help
This enables the /proc/sys/cpu/ sysctl interface for controlling
- CPUFreq, as known from the 2.4.-kernel patches for CPUFreq. Note
- that some drivers do not support this interface or offer less
- functionality.
-
- If you say N here, you'll be able to control CPUFreq using the
- new /proc/cpufreq interface.
+ CPUFreq, as known from the 2.4.-kernel patches for CPUFreq. 2.5
+ uses /proc/cpufreq instead. Please note that some drivers do not
+ work well with the 2.4. /proc/sys/cpu sysctl interface, so if in
+ doubt, say N here.
For details, take a look at linux/Documentation/cpufreq.
If in doubt, say N.
-config CPU_FREQ_26_API
- bool
- depends on CPU_FREQ && !CPU_FREQ_24_API
- default y
-
config X86_POWERNOW_K6
tristate "AMD Mobile K6-2/K6-3 PowerNow!"
depends on CPU_FREQ
config X86_LONGRUN
tristate "Transmeta LongRun"
- depends on CPU_FREQ && !CPU_FREQ_24_API
+ depends on CPU_FREQ
help
This adds the CPUFreq driver for Transmeta Crusoe processors which
support LongRun.
* (C) 2002 Dominik Brodowski <linux@brodo.de>
*
*
- * $Id: cpufreq.h,v 1.26 2002/09/21 09:05:29 db Exp $
+ * $Id: cpufreq.h,v 1.27 2002/10/08 14:54:23 db Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
int cpufreq_set_policy(struct cpufreq_policy *policy);
int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
-#ifdef CONFIG_CPU_FREQ_26_API
#ifdef CONFIG_PM
int cpufreq_restore(void);
#endif
-#endif
#ifdef CONFIG_CPU_FREQ_24_API
* CPUFREQ 2.4. INTERFACE *
*********************************************************************/
int cpufreq_setmax(unsigned int cpu);
-#ifdef CONFIG_PM
-int cpufreq_restore(void);
-#endif
int cpufreq_set(unsigned int kHz, unsigned int cpu);
unsigned int cpufreq_get(unsigned int cpu);
* Copyright (C) 2001 Russell King
* (C) 2002 Dominik Brodowski <linux@brodo.de>
*
- * $Id: cpufreq.c,v 1.43 2002/09/21 09:05:29 db Exp $
+ * $Id: cpufreq.c,v 1.45 2002/10/08 14:54:23 db Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
+#include <linux/proc_fs.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_CPU_FREQ_26_API
-#include <linux/proc_fs.h>
-#endif
-
#ifdef CONFIG_CPU_FREQ_24_API
#include <linux/sysctl.h>
#endif
__setup("cpufreq=", cpufreq_setup);
-#ifdef CONFIG_CPU_FREQ_26_API
#ifdef CONFIG_PROC_FS
/**
return;
}
#endif /* CONFIG_PROC_FS */
-#endif /* CONFIG_CPU_FREQ_26_API */
*********************************************************************/
#ifdef CONFIG_CPU_FREQ_24_API
-/* NOTE #1: when you use this API, you may not use any other calls,
- * except cpufreq_[un]register_notifier, of course.
- */
-
/**
* cpufreq_set - set the CPU frequency
* @freq: target frequency in kHz
cpufreq_driver->policy[policy->cpu].max = policy->max;
cpufreq_driver->policy[policy->cpu].policy = policy->policy;
}
-
+
#ifdef CONFIG_CPU_FREQ_24_API
if (policy->cpu == CPUFREQ_ALL_CPUS) {
for (i=0;i<NR_CPUS;i++)
case CPUFREQ_POSTCHANGE:
adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
notifier_call_chain(&cpufreq_transition_notifier_list, CPUFREQ_POSTCHANGE, freqs);
+#ifdef CONFIG_CPU_FREQ_24_API
+ if (freqs->cpu == CPUFREQ_ALL_CPUS) {
+ int i;
+ for (i=0;i<NR_CPUS;i++)
+ cpu_cur_freq[i] = freqs->new;
+ } else
+ cpu_cur_freq[freqs->cpu] = freqs->new;
+#endif
break;
}
up(&cpufreq_notifier_sem);
ret = cpufreq_set_policy(&default_policy);
-#ifdef CONFIG_CPU_FREQ_26_API
cpufreq_proc_init();
-#endif
#ifdef CONFIG_CPU_FREQ_24_API
down(&cpufreq_driver_sem);
up(&cpufreq_driver_sem);
-#ifdef CONFIG_CPU_FREQ_26_API
cpufreq_proc_exit();
-#endif
#ifdef CONFIG_CPU_FREQ_24_API
cpufreq_sysctl_exit();
policy.cpu = i;
up(&cpufreq_driver_sem);
-#ifdef CONFIG_CPU_FREQ_26_API
cpufreq_set_policy(&policy);
-#endif
-
-#ifdef CONFIG_CPU_FREQ_24_API
- cpufreq_set(cpu_cur_freq[i], i);
-#endif
}
return 0;