rtlwifi: rtl8821ae: Fix system lockups on boot

[ Upstream commit 54328e64047a54b8fc2362c2e1f0fa16c90f739f ]

In commit 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all
drivers"), the code that cleared all interrupt enable bits before setting them
was removed for all PCI drivers. This fixed an issue that caused TX to be
blocked for 3-5 seconds. On some RTL8821AE units, this change causes soft
lockups to occur on boot. For that reason, the portion of the earlier commit
that applied to rtl8821ae is reverted. Kernels 4.1 and newer are affected.

See http://marc.info/?l=linux-wireless&m=144373370103285&w=2 and
https://bugzilla.opensuse.org/show_bug.cgi?id=944978 for two cases where
this regression affected user systems. Note that this bug does not appear on
any of the developer's setups. For those users whose systems are affected
by the TX blockage, but do not lock up on boot, a module parameter is added
to disable the interrupt clear

Fixes: 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all drivers")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V4.1+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index d4567d12e07ebd13f17f0097baeec41a25702d31..5da6703942d9dd08017d896070404fdbe29a96e4 100644 (file)
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -247,6 +247,8 @@ struct rtl_pci {
        /* MSI support */
        bool msi_support;
        bool using_msi;
+       /* interrupt clear before set */
+       bool int_clear;
 };
 
 struct mp_adapter {

diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
index e17b728a21aa983e17af0671bf23b0cb08707553..28b8b6a25f6d45ada342ab101ab421d6a651a2be 100644 (file)
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
@@ -2253,11 +2253,28 @@ void rtl8821ae_set_qos(struct ieee80211_hw *hw, int aci)
        }
 }
 
+static void rtl8821ae_clear_interrupt(struct ieee80211_hw *hw)
+{
+       struct rtl_priv *rtlpriv = rtl_priv(hw);
+       u32 tmp = rtl_read_dword(rtlpriv, REG_HISR);
+
+       rtl_write_dword(rtlpriv, REG_HISR, tmp);
+
+       tmp = rtl_read_dword(rtlpriv, REG_HISRE);
+       rtl_write_dword(rtlpriv, REG_HISRE, tmp);
+
+       tmp = rtl_read_dword(rtlpriv, REG_HSISR);
+       rtl_write_dword(rtlpriv, REG_HSISR, tmp);
+}
+
 void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
 {
        struct rtl_priv *rtlpriv = rtl_priv(hw);
        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
+       if (!rtlpci->int_clear)
+               rtl8821ae_clear_interrupt(hw);/*clear it here first*/
+
        rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
        rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
        rtlpci->irq_enabled = true;

diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
index fc92dd6a0d078bf107f461a660b2ca5d3cf03e71..80307d187c0a0a8118ff124b0b0ce2fb5c877ba6 100644 (file)
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
@@ -142,6 +142,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
 
        rtl8821ae_bt_reg_init(hw);
        rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+       rtlpci->int_clear = rtlpriv->cfg->mod_params->int_clear;
        rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
 
        rtlpriv->dm.dm_initialgain_enable = 1;
@@ -213,6 +214,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
        rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
        rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
        rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+       rtlpci->msi_support = rtlpriv->cfg->mod_params->int_clear;
        if (rtlpriv->cfg->mod_params->disable_watchdog)
                pr_info("watchdog disabled\n");
        rtlpriv->psc.reg_fwctrl_lps = 3;
@@ -334,6 +336,7 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
        .swctrl_lps = false,
        .fwctrl_lps = true,
        .msi_support = true,
+       .int_clear = true,
        .debug = DBG_EMERG,
        .disable_watchdog = 0,
 };
@@ -463,6 +466,7 @@ module_param_named(fwlps, rtl8821ae_mod_params.fwctrl_lps, bool, 0444);
 module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
 module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
                   bool, 0444);
+module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
@@ -470,6 +474,7 @@ MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
 MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
 MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
 MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
 
 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
 

diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 27822fe34d9a2925d09c1055946acff588b69534..318078645e64f0b591eb1aa9dd532b8d9b8c77ff 100644 (file)
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -2212,6 +2212,9 @@ struct rtl_mod_params {
 
        /* default 0: 1 means disable */
        bool disable_watchdog;
+
+       /* default 0: 1 means do not disable interrupts */
+       bool int_clear;
 };
 
 struct rtl_hal_usbint_cfg {