+++ /dev/null
-/*
- * linux/arch/arm/lib/lh7a400-fiqhandler.S
- * Copyright (C) 2002, Lineo, Inc.
- * based on linux/arch/arm/lib/floppydma.S, which is
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
- .text
-
- .global fiqhandler_end
-
- @ register usage:
- @ r8 &interrupt controller registers
- @ r9 &gpio registers
- @ r11 work
- @ r12 work
-
-ENTRY(fiqhandler)
-
- @ read the status register to find out which FIQ this is
-
- ldr r12, [r8] @ intc->status
- and r12, r12, #0xf @ only interested in low-order 4 bits
-
- @ translate FIQ 0:3 to IRQ 23:26
- @ disable this FIQ and enable the corresponding IRQ
-
- str r12, [r8, #0xc] @ disable this FIQ
- mov r12, r12, lsl #23 @ get the corresopnding IRQ bit
- str r12, [r8, #0x8] @ enable that IRQ
-
- subs pc, lr, #4
-fiqhandler_end:
-
+++ /dev/null
-/* arch/arm/mach-lh7a40x/ide-lpd7a40x.c
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-
-#include <linux/config.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define IOBARRIER_READ readl (IOBARRIER_VIRT)
-
-static u8 lpd7a40x_ide_inb (unsigned long port)
-{
- u16 v = (u16) readw (port & ~0x1);
- IOBARRIER_READ;
- if (port & 0x1)
- v >>= 8;
- return v & 0xff;
-}
-
-static u16 lpd7a40x_ide_inw (unsigned long port)
-{
- u16 v = (u16) readw (port);
- IOBARRIER_READ;
- return v;
-}
-
-static void lpd7a40x_ide_insw (unsigned long port, void *addr, u32 count)
-{
- while (count--) {
- *((u16*) addr)++ = (u16) readw (port);
- IOBARRIER_READ;
- }
-}
-
-static u32 lpd7a40x_ide_inl (unsigned long port)
-{
- u32 v = (u16) readw (port);
- IOBARRIER_READ;
- v |= (u16) readw (port + 2);
- IOBARRIER_READ;
-
- return v;
-}
-
-static void lpd7a40x_ide_insl (unsigned long port, void *addr, u32 count)
-{
- while (count--) {
- *((u16*) addr)++ = (u16) readw (port);
- IOBARRIER_READ;
- *((u16*) addr)++ = (u16) readw (port + 2);
- IOBARRIER_READ;
- }
-}
-
-/* lpd7a40x_ide_outb -- this function is complicated by the fact that
- * the user wants to be able to do byte IO and the hardware cannot.
- * In order to write the high byte, we need to write a short. So, we
- * read before writing in order to maintain the register values that
- * shouldn't change. This isn't a good idea for the data IO registers
- * since reading from them will not return the current value. We
- * expect that this function handles the control register adequately.
-*/
-
-static void lpd7a40x_ide_outb (u8 valueUser, unsigned long port)
-{
- /* Block writes to SELECT register. Draconian, but the only
- * way to cope with this hardware configuration without
- * modifying the SELECT_DRIVE call in the ide driver. */
- if ((port & 0xf) == 0x6)
- return;
-
- if (port & 0x1) { /* Perform read before write. Only
- * the COMMAND register needs
- * this. */
- u16 value = (u16) readw (port & ~0x1);
- IOBARRIER_READ;
- value = (value & 0x00ff) | (valueUser << 8);
- writew (value, port & ~0x1);
- IOBARRIER_READ;
- }
- else { /* Allow low-byte writes which seem to
- * be OK. */
- writeb (valueUser, port);
- IOBARRIER_READ;
- }
-}
-
-static void lpd7a40x_ide_outbsync (ide_drive_t *drive, u8 value,
- unsigned long port)
-{
- lpd7a40x_ide_outb (value, port);
-}
-
-static void lpd7a40x_ide_outw (u16 value, unsigned long port)
-{
- writew (value, port);
- IOBARRIER_READ;
-}
-
-static void lpd7a40x_ide_outsw (unsigned long port, void *addr, u32 count)
-{
- while (count-- > 0) {
- writew (*((u16*) addr)++, port);
- IOBARRIER_READ;
- }
-}
-
-static void lpd7a40x_ide_outl (u32 value, unsigned long port)
-{
- writel (value, port);
- IOBARRIER_READ;
-}
-
-static void lpd7a40x_ide_outsl (unsigned long port, void *addr, u32 count)
-{
- while (count-- > 0) {
- writel (*((u32*) addr)++, port);
- IOBARRIER_READ;
- }
-}
-
-void lpd7a40x_SELECT_DRIVE (ide_drive_t *drive)
-{
- unsigned jifStart = jiffies;
-#define WAIT_TIME (30*HZ/1000)
-
- /* Check for readiness. */
- while ((HWIF(drive)->INB(IDE_STATUS_REG) & 0x40) == 0)
- if (jifStart <= jiffies + WAIT_TIME)
- return;
-
- /* Only allow one drive.
- For more information, see Documentation/arm/Sharp-LH/ */
- if (drive->select.all & (1<<4))
- return;
-
- /* OUTW so that the IDLE_IMMEDIATE (and not NOP) command is sent. */
- HWIF(drive)->OUTW(drive->select.all | 0xe100, IDE_SELECT_REG);
-}
-
-void lpd7a40x_hwif_ioops (ide_hwif_t *hwif)
-{
- hwif->mmio = 2; /* Just for show */
- hwif->irq = IDE_NO_IRQ; /* Stop this probing */
-
- hwif->OUTB = lpd7a40x_ide_outb;
- hwif->OUTBSYNC = lpd7a40x_ide_outbsync;
- hwif->OUTW = lpd7a40x_ide_outw;
- hwif->OUTL = lpd7a40x_ide_outl;
- hwif->OUTSW = lpd7a40x_ide_outsw;
- hwif->OUTSL = lpd7a40x_ide_outsl;
- hwif->INB = lpd7a40x_ide_inb;
- hwif->INW = lpd7a40x_ide_inw;
- hwif->INL = lpd7a40x_ide_inl;
- hwif->INSW = lpd7a40x_ide_insw;
- hwif->INSL = lpd7a40x_ide_insl;
- hwif->selectproc = lpd7a40x_SELECT_DRIVE;
-}
+++ /dev/null
-/* include/asm-arm/arch-lh7a40x/ide.h
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IDE_H
-#define __ASM_ARCH_IDE_H
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-/* This implementation of ide.h only applies to the LPD CardEngines.
- * Thankfully, there is less to do for the KEV.
- */
-
-#include <linux/config.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/registers.h>
-
-#define IDE_REG_LINE (1<<12) /* A12 drives !REG */
-#define IDE_ALT_LINE (1<<11) /* Unused A11 allows non-overlapping regions */
-#define IDE_CONTROLREG_OFFSET (0xe)
-
-void lpd7a40x_hwif_ioops (struct hwif_s* hwif);
-
-static __inline__ void ide_init_hwif_ports (hw_regs_t *hw, int data_port,
- int ctrl_port, int *irq)
-{
- ide_ioreg_t reg;
- int i;
- int regincr = 1;
-
- memset (hw, 0, sizeof (*hw));
-
- reg = (ide_ioreg_t) data_port;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg;
- reg += regincr;
- }
-
- hw->io_ports[IDE_CONTROL_OFFSET] = (ide_ioreg_t) ctrl_port;
-
- if (irq)
- *irq = IDE_NO_IRQ;
-}
-
-static __inline__ void ide_init_default_hwifs (void)
-{
- hw_regs_t hw;
- struct hwif_s* hwif;
-
- ide_init_hwif_ports (&hw,
- CF_VIRT + IDE_REG_LINE,
- CF_VIRT + IDE_REG_LINE + IDE_ALT_LINE
- + IDE_CONTROLREG_OFFSET,
- NULL);
-
- ide_register_hw (&hw, &hwif);
- lpd7a40x_hwif_ioops (hwif); /* Override IO routines */
-}
-#endif
-
-#endif
#define MAX_HWIFS 4
#endif
-#if defined(CONFIG_ARCH_LH7A40X) || defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
# include <asm/arch/ide.h> /* obsolete + broken */
#endif
-#if !defined(CONFIG_ARCH_L7200) && !defined(CONFIG_ARCH_LH7A40X)
+#if !defined(CONFIG_ARCH_L7200)
# define IDE_ARCH_OBSOLETE_INIT
# ifdef CONFIG_ARCH_CLPS7500
# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
# else
# define ide_default_io_ctl(base) (0)
# endif
-#endif /* !ARCH_L7200 && !ARCH_LH7A40X */
+#endif /* !ARCH_L7200 */
#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
projects / linux / commitdiff