#include <linux/highmem.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
+#include <asm/setup.h>
/*
* Machine setup..
}
}
-void __init setup_arch(char **cmdline_p)
-{
- unsigned long bootmap_size, low_mem_size;
- unsigned long start_pfn, max_low_pfn;
- int i;
-
- early_cpu_init();
-
-#ifdef CONFIG_VISWS
- visws_get_board_type_and_rev();
-#endif
-
- ROOT_DEV = ORIG_ROOT_DEV;
- drive_info = DRIVE_INFO;
- screen_info = SCREEN_INFO;
- apm_info.bios = APM_BIOS_INFO;
- saved_videomode = VIDEO_MODE;
- printk("Video mode to be used for restore is %lx\n", saved_videomode);
- if( SYS_DESC_TABLE.length != 0 ) {
- MCA_bus = SYS_DESC_TABLE.table[3] &0x2;
- machine_id = SYS_DESC_TABLE.table[0];
- machine_submodel_id = SYS_DESC_TABLE.table[1];
- BIOS_revision = SYS_DESC_TABLE.table[2];
- }
- aux_device_present = AUX_DEVICE_INFO;
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
- setup_memory_region();
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) &_text;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
- init_mm.brk = (unsigned long) &_end;
-
- code_resource.start = virt_to_phys(&_text);
- code_resource.end = virt_to_phys(&_etext)-1;
- data_resource.start = virt_to_phys(&_etext);
- data_resource.end = virt_to_phys(&_edata)-1;
-
- parse_cmdline_early(cmdline_p);
-
-#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
-
/*
- * Reserved space for vmalloc and iomap - defined in asm/page.h
+ * Find the highest page frame number we have available
*/
-#define MAXMEM_PFN PFN_DOWN(MAXMEM)
-#define MAX_NONPAE_PFN (1 << 20)
-
- /*
- * partially used pages are not usable - thus
- * we are rounding upwards:
- */
- start_pfn = PFN_UP(__pa(&_end));
+void __init find_max_pfn(void)
+{
+ int i;
- /*
- * Find the highest page frame number we have available
- */
max_pfn = 0;
for (i = 0; i < e820.nr_map; i++) {
unsigned long start, end;
if (end > max_pfn)
max_pfn = end;
}
+}
+
+/*
+ * Determine low and high memory ranges:
+ */
+unsigned long __init find_max_low_pfn(void)
+{
+ unsigned long max_low_pfn;
- /*
- * Determine low and high memory ranges:
- */
max_low_pfn = max_pfn;
if (max_low_pfn > MAXMEM_PFN) {
if (highmem_pages == -1)
printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
#endif
}
+ return max_low_pfn;
+}
-#ifdef CONFIG_HIGHMEM
- highstart_pfn = highend_pfn = max_pfn;
- if (max_pfn > max_low_pfn) {
- highstart_pfn = max_low_pfn;
- }
- printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
- pages_to_mb(highend_pfn - highstart_pfn));
-#endif
- printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
- pages_to_mb(max_low_pfn));
- /*
- * Initialize the boot-time allocator (with low memory only):
- */
- bootmap_size = init_bootmem(start_pfn, max_low_pfn);
+/*
+ * Register fully available low RAM pages with the bootmem allocator.
+ */
+static void __init register_bootmem_low_pages(unsigned long max_low_pfn)
+{
+ int i;
- /*
- * Register fully available low RAM pages with the bootmem allocator.
- */
for (i = 0; i < e820.nr_map; i++) {
unsigned long curr_pfn, last_pfn, size;
- /*
+ /*
* Reserve usable low memory
*/
if (e820.map[i].type != E820_RAM)
size = last_pfn - curr_pfn;
free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
}
+}
+
+static unsigned long __init setup_memory(void)
+{
+ unsigned long bootmap_size, start_pfn, max_low_pfn;
+
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ start_pfn = PFN_UP(__pa(&_end));
+
+ find_max_pfn();
+
+ max_low_pfn = find_max_low_pfn();
+
+#ifdef CONFIG_HIGHMEM
+ highstart_pfn = highend_pfn = max_pfn;
+ if (max_pfn > max_low_pfn) {
+ highstart_pfn = max_low_pfn;
+ }
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highend_pfn - highstart_pfn));
+#endif
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(max_low_pfn));
+ /*
+ * Initialize the boot-time allocator (with low memory only):
+ */
+ bootmap_size = init_bootmem(start_pfn, max_low_pfn);
+
+ register_bootmem_low_pages(max_low_pfn);
+
/*
* Reserve the bootmem bitmap itself as well. We do this in two
* steps (first step was init_bootmem()) because this catches
*/
find_smp_config();
#endif
+
#ifdef CONFIG_BLK_DEV_INITRD
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
}
}
#endif
+ return max_low_pfn;
+}
- /*
- * NOTE: before this point _nobody_ is allowed to allocate
- * any memory using the bootmem allocator.
- */
-
-#ifdef CONFIG_SMP
- smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
- paging_init();
-#ifdef CONFIG_ACPI_BOOT
- /*
- * Parse the ACPI tables for possible boot-time SMP configuration.
- */
- if (!acpi_disabled)
- acpi_boot_init(*cmdline_p);
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
- if (smp_found_config)
- get_smp_config();
-#endif
-
+/*
+ * Request address space for all standard RAM and ROM resources
+ * and also for regions reported as reserved by the e820.
+ */
+static void __init register_memory(unsigned long max_low_pfn)
+{
+ unsigned long low_mem_size;
+ int i;
- /*
- * Request address space for all standard RAM and ROM resources
- * and also for regions reported as reserved by the e820.
- */
probe_roms();
for (i = 0; i < e820.nr_map; i++) {
struct resource *res;
low_mem_size = ((max_low_pfn << PAGE_SHIFT) + 0xfffff) & ~0xfffff;
if (low_mem_size > pci_mem_start)
pci_mem_start = low_mem_size;
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long max_low_pfn;
+
+ early_cpu_init();
+
+#ifdef CONFIG_VISWS
+ visws_get_board_type_and_rev();
+#endif
+
+ ROOT_DEV = ORIG_ROOT_DEV;
+ drive_info = DRIVE_INFO;
+ screen_info = SCREEN_INFO;
+ apm_info.bios = APM_BIOS_INFO;
+ saved_videomode = VIDEO_MODE;
+ printk("Video mode to be used for restore is %lx\n", saved_videomode);
+ if( SYS_DESC_TABLE.length != 0 ) {
+ MCA_bus = SYS_DESC_TABLE.table[3] &0x2;
+ machine_id = SYS_DESC_TABLE.table[0];
+ machine_submodel_id = SYS_DESC_TABLE.table[1];
+ BIOS_revision = SYS_DESC_TABLE.table[2];
+ }
+ aux_device_present = AUX_DEVICE_INFO;
+
+#ifdef CONFIG_BLK_DEV_RAM
+ rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+ rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+ rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+ setup_memory_region();
+
+ if (!MOUNT_ROOT_RDONLY)
+ root_mountflags &= ~MS_RDONLY;
+ init_mm.start_code = (unsigned long) &_text;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+ code_resource.start = virt_to_phys(&_text);
+ code_resource.end = virt_to_phys(&_etext)-1;
+ data_resource.start = virt_to_phys(&_etext);
+ data_resource.end = virt_to_phys(&_edata)-1;
+
+ parse_cmdline_early(cmdline_p);
+
+ max_low_pfn = setup_memory();
+
+ /*
+ * NOTE: before this point _nobody_ is allowed to allocate
+ * any memory using the bootmem allocator.
+ */
+
+#ifdef CONFIG_SMP
+ smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
+#endif
+ paging_init();
+#ifdef CONFIG_ACPI_BOOT
+ /*
+ * Parse the ACPI tables for possible boot-time SMP configuration.
+ */
+ if (!acpi_disabled)
+ acpi_boot_init(*cmdline_p);
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (smp_found_config)
+ get_smp_config();
+#endif
+
+ register_memory(max_low_pfn);
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
projects / linux / commitdiff