bool "Support for early boot texts over serial port"
depends on 4xx || GT64260 || LOPEC || PPLUS || PRPMC800 || PPC_GEN550
-config OCP
+config PPC_OCP
bool
depends on IBM_OCP
default y
drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
drivers-$(CONFIG_8260) += arch/ppc/8260_io/
-drivers-$(CONFIG_OCP) += arch/ppc/ocp/
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
#include <asm/sections.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
+#include <asm/ocp.h>
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
+#ifdef CONFIG_PPC_OCP
+ /* Initialize OCP device list */
+ ocp_early_init();
+ if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
+#endif
+
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := ocp.o ocp-driver.o ocp-probe.o
-
+++ /dev/null
-/*
- * FILE NAME: ocp-driver.c
- *
- * BRIEF MODULE DESCRIPTION:
- * driver callback, id matching and registration
- * Based on drivers/pci/pci-driver, Copyright (c) 1997--1999 Martin Mares
- *
- * Maintained by: Armin <akuster@mvista.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/ocp.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-/*
- * Registration of OCP drivers and handling of hot-pluggable devices.
- */
-
-static int
-ocp_device_probe(struct device *dev)
-{
- int error = 0;
- struct ocp_driver *drv;
- struct ocp_device *ocp_dev;
-
- drv = to_ocp_driver(dev->driver);
- ocp_dev = to_ocp_dev(dev);
-
- if (drv->probe) {
- error = drv->probe(ocp_dev);
- DBG("probe return code %d\n", error);
- if (error >= 0) {
- ocp_dev->driver = drv;
- error = 0;
- }
- }
- return error;
-}
-
-static int
-ocp_device_remove(struct device *dev)
-{
- struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
- if (ocp_dev->driver) {
- if (ocp_dev->driver->remove)
- ocp_dev->driver->remove(ocp_dev);
- ocp_dev->driver = NULL;
- }
- return 0;
-}
-
-static int
-ocp_device_suspend(struct device *dev, u32 state, u32 level)
-{
- struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
- int error = 0;
-
- if (ocp_dev->driver) {
- if (level == SUSPEND_SAVE_STATE && ocp_dev->driver->save_state)
- error = ocp_dev->driver->save_state(ocp_dev, state);
- else if (level == SUSPEND_POWER_DOWN
- && ocp_dev->driver->suspend)
- error = ocp_dev->driver->suspend(ocp_dev, state);
- }
- return error;
-}
-
-static int
-ocp_device_resume(struct device *dev, u32 level)
-{
- struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
- if (ocp_dev->driver) {
- if (level == RESUME_POWER_ON && ocp_dev->driver->resume)
- ocp_dev->driver->resume(ocp_dev);
- }
- return 0;
-}
-
-/**
- * ocp_bus_match - Works out whether an OCP device matches any
- * of the IDs listed for a given OCP driver.
- * @dev: the generic device struct for the OCP device
- * @drv: the generic driver struct for the OCP driver
- *
- * Used by a driver to check whether a OCP device present in the
- * system is in its list of supported devices. Returns 1 for a
- * match, or 0 if there is no match.
- */
-static int
-ocp_bus_match(struct device *dev, struct device_driver *drv)
-{
- struct ocp_device *ocp_dev = to_ocp_dev(dev);
- struct ocp_driver *ocp_drv = to_ocp_driver(drv);
- const struct ocp_device_id *ids = ocp_drv->id_table;
-
- if (!ids)
- return 0;
-
- while (ids->vendor || ids->device) {
- if ((ids->vendor == OCP_ANY_ID
- || ids->vendor == ocp_dev->vendor)
- && (ids->device == OCP_ANY_ID
- || ids->device == ocp_dev->device)) {
- DBG("Bus match -vendor:%x device:%x\n", ids->vendor,
- ids->device);
- return 1;
- }
- ids++;
- }
- return 0;
-}
-
-struct bus_type ocp_bus_type = {
- .name = "ocp",
- .match = ocp_bus_match,
-};
-
-static int __init
-ocp_driver_init(void)
-{
- return bus_register(&ocp_bus_type);
-}
-
-postcore_initcall(ocp_driver_init);
-
-/**
- * ocp_register_driver - register a new ocp driver
- * @drv: the driver structure to register
- *
- * Adds the driver structure to the list of registered drivers
- * Returns the number of ocp devices which were claimed by the driver
- * during registration. The driver remains registered even if the
- * return value is zero.
- */
-int
-ocp_register_driver(struct ocp_driver *drv)
-{
- int count = 0;
-
- /* initialize common driver fields */
- drv->driver.name = drv->name;
- drv->driver.bus = &ocp_bus_type;
- drv->driver.probe = ocp_device_probe;
- drv->driver.resume = ocp_device_resume;
- drv->driver.suspend = ocp_device_suspend;
- drv->driver.remove = ocp_device_remove;
-
- /* register with core */
- count = driver_register(&drv->driver);
- return count ? count : 1;
-}
-
-/**
- * ocp_unregister_driver - unregister a ocp driver
- * @drv: the driver structure to unregister
- *
- * Deletes the driver structure from the list of registered OCP drivers,
- * gives it a chance to clean up by calling its remove() function for
- * each device it was responsible for, and marks those devices as
- * driverless.
- */
-
-void
-ocp_unregister_driver(struct ocp_driver *drv)
-{
- driver_unregister(&drv->driver);
-}
-
-EXPORT_SYMBOL(ocp_register_driver);
-EXPORT_SYMBOL(ocp_unregister_driver);
-EXPORT_SYMBOL(ocp_bus_type);
+++ /dev/null
-/*
- * FILE NAME: ocp-probe.c
- *
- * BRIEF MODULE DESCRIPTION:
- * Device scanning & bus set routines
- * Based on drivers/pci/probe, Copyright (c) 1997--1999 Martin Mares
- *
- * Maintained by: Armin <akuster@mvista.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ocp.h>
-
-LIST_HEAD(ocp_devices);
-struct device *ocp_bus;
-
-static struct ocp_device * __devinit
-ocp_setup_dev(struct ocp_def *odef, unsigned int index)
-{
- struct ocp_device *dev;
-
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return NULL;
- memset(dev, 0, sizeof(*dev));
-
- dev->vendor = odef->vendor;
- dev->device = odef->device;
- dev->num = ocp_get_num(dev->device);
- dev->paddr = odef->paddr;
- dev->irq = odef->irq;
- dev->pm = odef->pm;
- dev->current_state = 4;
-
- sprintf(dev->name, "OCP device %04x:%04x", dev->vendor, dev->device);
-
- DBG("%s %s 0x%lx irq:%d pm:0x%lx \n", dev->slot_name, dev->name,
- (unsigned long) dev->paddr, dev->irq, dev->pm);
-
- /* now put in global tree */
- sprintf(dev->dev.bus_id, "%d", index);
- dev->dev.parent = ocp_bus;
- dev->dev.bus = &ocp_bus_type;
- device_register(&dev->dev);
-
- return dev;
-}
-
-static struct device * __devinit ocp_alloc_primary_bus(void)
-{
- struct device *b;
-
- b = kmalloc(sizeof(struct device), GFP_KERNEL);
- if (b == NULL)
- return NULL;
- memset(b, 0, sizeof(struct device));
- strcpy(b->bus_id, "ocp");
-
- device_register(b);
-
- return b;
-}
-
-void __devinit ocp_setup_devices(struct ocp_def *odef)
-{
- int index;
- struct ocp_device *dev;
-
- if (ocp_bus == NULL)
- ocp_bus = ocp_alloc_primary_bus();
- for (index = 0; odef->vendor != OCP_VENDOR_INVALID; ++index, ++odef) {
- dev = ocp_setup_dev(odef, index);
- if (dev != NULL)
- list_add_tail(&dev->global_list, &ocp_devices);
- }
-}
-
-extern struct ocp_def core_ocp[];
-
-static int __init
-ocparch_init(void)
-{
- ocp_setup_devices(core_ocp);
- return 0;
-}
-
-subsys_initcall(ocparch_init);
-
-EXPORT_SYMBOL(ocp_devices);
+++ /dev/null
-/*
- * ocp.c
- *
- * The is drived from pci.c
- *
- * Current Maintainer
- * Armin Kuster akuster@dslextreme.com
- * Jan, 2002
- *
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/errno.h>
-
-/**
- * ocp_get_num - This determines how many OCP devices of a given
- * device are registered
- * @device: OCP device such as HOST, PCI, GPT, UART, OPB, IIC, GPIO, EMAC, ZMII,
- *
- * The routine returns the number that devices which is registered
- */
-unsigned int ocp_get_num(unsigned int device)
-{
- unsigned int count = 0;
- struct ocp_device *ocp;
- struct list_head *ocp_l;
-
- list_for_each(ocp_l, &ocp_devices) {
- ocp = list_entry(ocp_l, struct ocp_device, global_list);
- if (device == ocp->device)
- count++;
- }
- return count;
-}
-
-/**
- * ocp_get_dev - get ocp driver pointer for ocp device and instance of it
- * @device: OCP device such as PCI, GPT, UART, OPB, IIC, GPIO, EMAC, ZMII
- * @dev_num: ocp device number whos paddr you want
- *
- * The routine returns ocp device pointer
- * in list based on device and instance of that device
- *
- */
-struct ocp_device *
-ocp_get_dev(unsigned int device, int dev_num)
-{
- struct ocp_device *ocp;
- struct list_head *ocp_l;
- int count = 0;
-
- list_for_each(ocp_l, &ocp_devices) {
- ocp = list_entry(ocp_l, struct ocp_device, global_list);
- if (device == ocp->device) {
- if (dev_num == count)
- return ocp;
- count++;
- }
- }
- return NULL;
-}
-
-EXPORT_SYMBOL(ocp_get_dev);
-EXPORT_SYMBOL(ocp_get_num);
-
-#ifdef CONFIG_PM
-int ocp_generic_suspend(struct ocp_device *pdev, u32 state)
-{
- ocp_force_power_off(pdev);
- return 0;
-}
-
-int ocp_generic_resume(struct ocp_device *pdev)
-{
- ocp_force_power_on(pdev);
-}
-
-EXPORT_SYMBOL(ocp_generic_suspend);
-EXPORT_SYMBOL(ocp_generic_resume);
-#endif /* CONFIG_PM */
CFLAGS_btext.o += -mrelocatable-lib
obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
+obj-$(CONFIG_PPC_OCP) += ocp.o
obj-$(CONFIG_44x) += ibm44x_common.o
obj-$(CONFIG_440GP) += ibm440gp_common.o
ifeq ($(CONFIG_4xx),y)
--- /dev/null
+/*
+ * ocp.c
+ *
+ * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * Mipsys - France
+ *
+ * Derived from work (c) Armin Kuster akuster@pacbell.net
+ *
+ * Additional support and port to 2.6 LDM/sysfs by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * OCP (On Chip Peripheral) is a software emulated "bus" with a
+ * pseudo discovery method for dumb peripherals. Usually these type
+ * of peripherals are found on embedded SoC (System On a Chip)
+ * processors or highly integrated system controllers that have
+ * a host bridge and many peripherals. Common examples where
+ * this is already used include the PPC4xx, PPC85xx, MPC52xx,
+ * and MV64xxx parts.
+ *
+ * This subsystem creates a standard OCP bus type within the
+ * device model. The devices on the OCP bus are seeded by an
+ * an initial OCP device array created by the arch-specific
+ * Device entries can be added/removed/modified through OCP
+ * helper functions to accomodate system and board-specific
+ * parameters commonly found in embedded systems. OCP also
+ * provides a standard method for devices to describe extended
+ * attributes about themselves to the system. A standard access
+ * method allows OCP drivers to obtain the information, both
+ * SoC-specific and system/board-specific, needed for operation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/bootmem.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/ocp.h>
+#include <asm/errno.h>
+#include <asm/rwsem.h>
+#include <asm/semaphore.h>
+
+//#define DBG(x) printk x
+#define DBG(x)
+
+extern int mem_init_done;
+
+extern struct ocp_def core_ocp[]; /* Static list of devices, provided by
+ CPU core */
+
+LIST_HEAD(ocp_devices); /* List of all OCP devices */
+DECLARE_RWSEM(ocp_devices_sem); /* Global semaphores for those lists */
+
+static int ocp_inited;
+
+/* Sysfs support */
+#define OCP_DEF_ATTR(field, format_string) \
+static ssize_t \
+show_##field(struct device *dev, char *buf) \
+{ \
+ struct ocp_device *odev = to_ocp_dev(dev); \
+ \
+ return sprintf(buf, format_string, odev->def->field); \
+} \
+static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
+
+OCP_DEF_ATTR(vendor, "0x%04x\n");
+OCP_DEF_ATTR(function, "0x%04x\n");
+OCP_DEF_ATTR(index, "0x%04x\n");
+#ifdef CONFIG_PTE_64BIT
+OCP_DEF_ATTR(paddr, "0x%16Lx\n");
+#else
+OCP_DEF_ATTR(paddr, "0x%08lx\n");
+#endif
+OCP_DEF_ATTR(irq, "%d\n");
+OCP_DEF_ATTR(pm, "%lu\n");
+
+void ocp_create_sysfs_dev_files(struct ocp_device *odev)
+{
+ struct device *dev = &odev->dev;
+
+ /* Current OCP device def attributes */
+ device_create_file(dev, &dev_attr_vendor);
+ device_create_file(dev, &dev_attr_function);
+ device_create_file(dev, &dev_attr_index);
+ device_create_file(dev, &dev_attr_paddr);
+ device_create_file(dev, &dev_attr_irq);
+ device_create_file(dev, &dev_attr_pm);
+ /* Current OCP device additions attributes */
+ if (odev->def->additions && odev->def->show)
+ odev->def->show(dev);
+}
+
+/**
+ * ocp_device_match - Match one driver to one device
+ * @drv: driver to match
+ * @dev: device to match
+ *
+ * This function returns 0 if the driver and device don't match
+ */
+static int
+ocp_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct ocp_device *ocp_dev = to_ocp_dev(dev);
+ struct ocp_driver *ocp_drv = to_ocp_drv(drv);
+ const struct ocp_device_id *ids = ocp_drv->id_table;
+
+ if (!ids)
+ return 0;
+
+ while (ids->vendor || ids->function) {
+ if ((ids->vendor == OCP_ANY_ID
+ || ids->vendor == ocp_dev->def->vendor)
+ && (ids->function == OCP_ANY_ID
+ || ids->function == ocp_dev->def->function))
+ return 1;
+ ids++;
+ }
+ return 0;
+}
+
+static int
+ocp_device_probe(struct device *dev)
+{
+ int error = 0;
+ struct ocp_driver *drv;
+ struct ocp_device *ocp_dev;
+
+ drv = to_ocp_drv(dev->driver);
+ ocp_dev = to_ocp_dev(dev);
+
+ if (drv->probe) {
+ error = drv->probe(ocp_dev);
+ if (error >= 0) {
+ ocp_dev->driver = drv;
+ error = 0;
+ }
+ }
+ return error;
+}
+
+static int
+ocp_device_remove(struct device *dev)
+{
+ struct ocp_device *ocp_dev = to_ocp_dev(dev);
+
+ if (ocp_dev->driver) {
+ if (ocp_dev->driver->remove)
+ ocp_dev->driver->remove(ocp_dev);
+ ocp_dev->driver = NULL;
+ }
+ return 0;
+}
+
+static int
+ocp_device_suspend(struct device *dev, u32 state)
+{
+ struct ocp_device *ocp_dev = to_ocp_dev(dev);
+ struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
+
+ if (dev->driver && ocp_drv->suspend)
+ return ocp_drv->suspend(ocp_dev, state);
+ return 0;
+}
+
+static int
+ocp_device_resume(struct device *dev)
+{
+ struct ocp_device *ocp_dev = to_ocp_dev(dev);
+ struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
+
+ if (dev->driver && ocp_drv->resume)
+ return ocp_drv->resume(ocp_dev);
+ return 0;
+}
+
+struct bus_type ocp_bus_type = {
+ .name = "ocp",
+ .match = ocp_device_match,
+ .suspend = ocp_device_suspend,
+ .resume = ocp_device_resume,
+};
+
+/**
+ * ocp_register_driver - Register an OCP driver
+ * @drv: pointer to statically defined ocp_driver structure
+ *
+ * The driver's probe() callback is called either recursively
+ * by this function or upon later call of ocp_driver_init
+ *
+ * NOTE: Detection of devices is a 2 pass step on this implementation,
+ * hotswap isn't supported. First, all OCP devices are put in the device
+ * list, _then_ all drivers are probed on each match.
+ *
+ * This function returns a count of how many devices actually matched
+ * (whether the probe routine returned 0 or -ENODEV, a different error
+ * code isn't considered as a match).
+ */
+int
+ocp_register_driver(struct ocp_driver *drv)
+{
+ int count = 0;
+
+ /* initialize common driver fields */
+ drv->driver.name = drv->name;
+ drv->driver.bus = &ocp_bus_type;
+ drv->driver.probe = ocp_device_probe;
+ drv->driver.remove = ocp_device_remove;
+
+ /* register with core */
+ count = driver_register(&drv->driver);
+
+ return count ? count : 1;
+}
+
+/**
+ * ocp_unregister_driver - Unregister an OCP driver
+ * @drv: pointer to statically defined ocp_driver structure
+ *
+ * The driver's remove() callback is called recursively
+ * by this function for any device already registered
+ */
+void
+ocp_unregister_driver(struct ocp_driver *drv)
+{
+ DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name));
+
+ driver_unregister(&drv->driver);
+
+ DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name));
+}
+
+/* Core of ocp_find_device(). Caller must hold ocp_devices_sem */
+static struct ocp_device *
+__ocp_find_device(unsigned int vendor, unsigned int function, int index)
+{
+ struct list_head *entry;
+ struct ocp_device *dev, *found = NULL;
+
+ DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
+
+ list_for_each(entry, &ocp_devices) {
+ dev = list_entry(entry, struct ocp_device, link);
+ if (vendor != OCP_ANY_ID && vendor != dev->def->vendor)
+ continue;
+ if (function != OCP_ANY_ID && function != dev->def->function)
+ continue;
+ if (index != OCP_ANY_INDEX && index != dev->def->index)
+ continue;
+ found = dev;
+ break;
+ }
+
+ DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index));
+
+ return found;
+}
+
+/**
+ * ocp_find_device - Find a device by function & index
+ * @vendor: vendor ID of the device (or OCP_ANY_ID)
+ * @function: function code of the device (or OCP_ANY_ID)
+ * @idx: index of the device (or OCP_ANY_INDEX)
+ *
+ * This function allows a lookup of a given function by it's
+ * index, it's typically used to find the MAL or ZMII associated
+ * with an EMAC or similar horrors.
+ * You can pass vendor, though you usually want OCP_ANY_ID there...
+ */
+struct ocp_device *
+ocp_find_device(unsigned int vendor, unsigned int function, int index)
+{
+ struct ocp_device *dev;
+
+ down_read(&ocp_devices_sem);
+ dev = __ocp_find_device(vendor, function, index);
+ up_read(&ocp_devices_sem);
+
+ return dev;
+}
+
+/**
+ * ocp_get_one_device - Find a def by function & index
+ * @vendor: vendor ID of the device (or OCP_ANY_ID)
+ * @function: function code of the device (or OCP_ANY_ID)
+ * @idx: index of the device (or OCP_ANY_INDEX)
+ *
+ * This function allows a lookup of a given ocp_def by it's
+ * vendor, function, and index. The main purpose for is to
+ * allow modification of the def before binding to the driver
+ */
+struct ocp_def *
+ocp_get_one_device(unsigned int vendor, unsigned int function, int index)
+{
+ struct ocp_device *dev;
+ struct ocp_def *found = NULL;
+
+ DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n",
+ vendor, function, index));
+
+ dev = ocp_find_device(vendor, function, index);
+
+ if (dev)
+ found = dev->def;
+
+ DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n",
+ vendor, function, index));
+
+ return found;
+}
+
+/**
+ * ocp_add_one_device - Add a device
+ * @def: static device definition structure
+ *
+ * This function adds a device definition to the
+ * device list. It may only be called before
+ * ocp_driver_init() and will return an error
+ * otherwise.
+ */
+int
+ocp_add_one_device(struct ocp_def *def)
+{
+ struct ocp_device *dev;
+
+ DBG(("ocp: ocp_add_one_device()...\n"));
+
+ /* Can't be called after ocp driver init */
+ if (ocp_inited)
+ return 1;
+
+ if (mem_init_done)
+ dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ else
+ dev = alloc_bootmem(sizeof(*dev));
+
+ if (dev == NULL)
+ return 1;
+ memset(dev, 0, sizeof(*dev));
+ dev->def = def;
+ dev->current_state = 4;
+ sprintf(dev->name, "OCP device %04x:%04x:%04x",
+ dev->def->vendor, dev->def->function, dev->def->index);
+ down_write(&ocp_devices_sem);
+ list_add_tail(&dev->link, &ocp_devices);
+ up_write(&ocp_devices_sem);
+
+ DBG(("ocp: ocp_add_one_device()...done\n"));
+
+ return 0;
+}
+
+/**
+ * ocp_remove_one_device - Remove a device by function & index
+ * @vendor: vendor ID of the device (or OCP_ANY_ID)
+ * @function: function code of the device (or OCP_ANY_ID)
+ * @idx: index of the device (or OCP_ANY_INDEX)
+ *
+ * This function allows removal of a given function by its
+ * index. It may only be called before ocp_driver_init()
+ * and will return an error otherwise.
+ */
+int
+ocp_remove_one_device(unsigned int vendor, unsigned int function, int index)
+{
+ struct ocp_device *dev;
+
+ DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
+
+ /* Can't be called after ocp driver init */
+ if (ocp_inited)
+ return 1;
+
+ down_write(&ocp_devices_sem);
+ dev = __ocp_find_device(vendor, function, index);
+ list_del((struct list_head *)dev);
+ up_write(&ocp_devices_sem);
+
+ DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
+
+ return 0;
+}
+
+/**
+ * ocp_for_each_device - Iterate over OCP devices
+ * @callback: routine to execute for each ocp device.
+ * @arg: user data to be passed to callback routine.
+ *
+ * This routine holds the ocp_device semaphore, so the
+ * callback routine cannot modify the ocp_device list.
+ */
+void
+ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg)
+{
+ struct list_head *entry;
+
+ if (callback) {
+ down_read(&ocp_devices_sem);
+ list_for_each(entry, &ocp_devices)
+ callback(list_entry(entry, struct ocp_device, link),
+ arg);
+ up_read(&ocp_devices_sem);
+ }
+}
+
+/**
+ * ocp_early_init - Init OCP device management
+ *
+ * This function builds the list of devices before setup_arch.
+ * This allows platform code to modify the device lists before
+ * they are bound to drivers (changes to paddr, removing devices
+ * etc)
+ */
+int __init
+ocp_early_init(void)
+{
+ struct ocp_def *def;
+
+ DBG(("ocp: ocp_early_init()...\n"));
+
+ /* Fill the devices list */
+ for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++)
+ ocp_add_one_device(def);
+
+ DBG(("ocp: ocp_early_init()... done.\n"));
+
+ return 0;
+}
+
+/**
+ * ocp_driver_init - Init OCP device management
+ *
+ * This function is meant to be called via OCP bus registration.
+ */
+static int __init
+ocp_driver_init(void)
+{
+ int ret = 0, index = 0;
+ struct device *ocp_bus;
+ struct list_head *entry;
+ struct ocp_device *dev;
+
+ if (ocp_inited)
+ return ret;
+ ocp_inited = 1;
+
+ DBG(("ocp: ocp_driver_init()...\n"));
+
+ /* Allocate/register primary OCP bus */
+ ocp_bus = kmalloc(sizeof(struct device), GFP_KERNEL);
+ if (ocp_bus == NULL)
+ return 1;
+ memset(ocp_bus, 0, sizeof(struct device));
+ strcpy(ocp_bus->bus_id, "ocp");
+
+ bus_register(&ocp_bus_type);
+
+ device_register(ocp_bus);
+
+ /* Put each OCP device into global device list */
+ list_for_each(entry, &ocp_devices) {
+ dev = list_entry(entry, struct ocp_device, link);
+ sprintf(dev->dev.bus_id, "%2.2x", index);
+ dev->dev.parent = ocp_bus;
+ dev->dev.bus = &ocp_bus_type;
+ device_register(&dev->dev);
+ ocp_create_sysfs_dev_files(dev);
+ index++;
+ }
+
+ DBG(("ocp: ocp_driver_init()... done.\n"));
+
+ return 0;
+}
+
+postcore_initcall(ocp_driver_init);
+
+EXPORT_SYMBOL(ocp_bus_type);
+EXPORT_SYMBOL(ocp_find_device);
+EXPORT_SYMBOL(ocp_register_driver);
+EXPORT_SYMBOL(ocp_unregister_driver);
/*
* ocp.h
*
+ * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * Mipsys - France
*
- * Current Maintainer
- * Armin Kuster akuster@pacbell.net
- * Jan, 2002
- *
+ * Derived from work (c) Armin Kuster akuster@pacbell.net
*
+ * Additional support and port to 2.6 LDM/sysfs by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
+ * TODO: - Add get/put interface & fixup locking to provide same API for
+ * 2.4 and 2.5
+ * - Rework PM callbacks
*/
#ifdef __KERNEL__
#ifndef __OCP_H__
#define __OCP_H__
+#include <linux/init.h>
#include <linux/list.h>
#include <linux/config.h>
+#include <linux/devfs_fs_kernel.h>
#include <linux/device.h>
-#include <linux/errno.h>
+#include <asm/mmu.h>
#include <asm/ocp_ids.h>
-#include <asm/mmu.h> /* For phys_addr_t */
-#undef DEBUG
-/* #define DEBUG*/
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
+#include <asm/rwsem.h>
+#include <asm/semaphore.h>
+#define OCP_MAX_IRQS 7
+#define MAX_EMACS 4
#define OCP_IRQ_NA -1 /* used when ocp device does not have an irq */
-#define OCP_IRQ_MUL -2 /* used for ocp devices with multiple irqs */
-#define OCP_NULL_TYPE 0 /* used to mark end of list */
-#define OCP_DEV_NA -1
+#define OCP_IRQ_MUL -2 /* used for ocp devices with multiply irqs */
+#define OCP_NULL_TYPE -1 /* used to mark end of list */
#define OCP_CPM_NA 0 /* No Clock or Power Management avaliable */
+#define OCP_PADDR_NA 0 /* No MMIO registers */
#define OCP_ANY_ID (~0)
+#define OCP_ANY_INDEX -1
-
-extern struct list_head ocp_root_buses;
-extern struct list_head ocp_devices;
+extern struct list_head ocp_devices;
+extern struct rw_semaphore ocp_devices_sem;
struct ocp_device_id {
- unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
- char name[16];
- char desc[50];
- unsigned long driver_data; /* Data private to the driver */
+ unsigned int vendor, function; /* Vendor and function ID or OCP_ANY_ID */
+ unsigned long driver_data; /* Data private to the driver */
};
-struct func_info {
- char name[16];
- char desc[50];
-};
+/*
+ * Static definition of an OCP device.
+ *
+ * @vendor: Vendor code. It is _STRONGLY_ discouraged to use
+ * the vendor code as a way to match a unique device,
+ * though I kept that possibility open, you should
+ * really define different function codes for different
+ * device types
+ * @function: This is the function code for this device.
+ * @index: This index is used for mapping the Nth function of a
+ * given core. This is typically used for cross-driver
+ * matching, like looking for a given MAL or ZMII from
+ * an EMAC or for getting to the proper set of DCRs.
+ * Indices are no longer magically calculated based on
+ * structure ordering, they have to be actually coded
+ * into the ocp_def to avoid any possible confusion
+ * I _STRONGLY_ (again ? wow !) encourage anybody relying
+ * on index mapping to encode the "target" index in an
+ * associated structure pointed to by "additions", see
+ * how it's done for the EMAC driver.
+ * @paddr: Device physical address (may not mean anything...)
+ * @irq: Interrupt line for this device (TODO: think about making
+ * an array with this)
+ * @pm: Currently, contains the bitmask in CPMFR DCR for the device
+ * @additions: Optionally points to a function specific structure
+ * providing additional informations for a given device
+ * instance. It's currently used by the EMAC driver for MAL
+ * channel & ZMII port mapping among others.
+ * @show: Optionally points to a function specific structure
+ * providing a sysfs show routine for additions fields.
+ */
struct ocp_def {
- unsigned int vendor;
- unsigned int device;
- phys_addr_t paddr;
- int irq;
- unsigned long pm;
+ unsigned int vendor;
+ unsigned int function;
+ int index;
+ phys_addr_t paddr;
+ int irq;
+ unsigned long pm;
+ void *additions;
+ void (*show)(struct device *);
};
-/* Struct for single ocp device managment */
+/* Struct for a given device instance */
struct ocp_device {
- struct list_head global_list;
- unsigned int num; /* instance of device */
- char name[80]; /* device name */
- unsigned int vendor;
- unsigned int device;
- phys_addr_t paddr;
- int irq;
- unsigned long pm;
- void *ocpdev; /* driver data for this device */
- struct ocp_driver *driver;
- u32 current_state; /* Current operating state. In ACPI-speak,
- this is D0-D3, D0 being fully functional,
- and D3 being off. */
- struct device dev;
+ struct list_head link;
+ char name[80]; /* device name */
+ struct ocp_def *def; /* device definition */
+ void *drvdata; /* driver data for this device */
+ struct ocp_driver *driver;
+ u32 current_state; /* Current operating state. In ACPI-speak,
+ this is D0-D3, D0 being fully functional,
+ and D3 being off. */
+ struct device dev;
};
struct ocp_driver {
const struct ocp_device_id *id_table; /* NULL if wants all devices */
int (*probe) (struct ocp_device *dev); /* New device inserted */
void (*remove) (struct ocp_device *dev); /* Device removed (NULL if not a hot-plug capable driver) */
- int (*save_state) (struct ocp_device *dev, u32 state); /* Save Device Context */
int (*suspend) (struct ocp_device *dev, u32 state); /* Device suspended */
int (*resume) (struct ocp_device *dev); /* Device woken up */
- int (*enable_wake) (struct ocp_device *dev, u32 state, int enable); /* Enable wake event */
struct device_driver driver;
};
-#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
-#define to_ocp_driver(n) container_of(n, struct ocp_driver, driver)
-
-extern int ocp_register_driver(struct ocp_driver *drv);
-extern void ocp_unregister_driver(struct ocp_driver *drv);
-
-#define ocp_dev_g(n) list_entry(n, struct ocp_device, global_list)
-
-#define ocp_for_each_dev(dev) \
- for(dev = ocp_dev_g(ocp_devices.next); dev != ocp_dev_g(&ocp_devices); dev = ocp_dev_g(dev->global_list.next))
+#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
+#define to_ocp_drv(n) container_of(n, struct ocp_driver, driver)
/* Similar to the helpers above, these manipulate per-ocp_dev
* driver-specific data. Currently stored as ocp_dev::ocpdev,
static inline void *
ocp_get_drvdata(struct ocp_device *pdev)
{
- return pdev->ocpdev;
+ return pdev->drvdata;
}
static inline void
ocp_set_drvdata(struct ocp_device *pdev, void *data)
{
- pdev->ocpdev = data;
-}
-
-/*
- * a helper function which helps ensure correct pci_driver
- * setup and cleanup for commonly-encountered hotplug/modular cases
- *
- * This MUST stay in a header, as it checks for -DMODULE
- */
-static inline int ocp_module_init(struct ocp_driver *drv)
-{
- int rc = ocp_register_driver(drv);
-
- if (rc > 0)
- return 0;
-
- /* iff CONFIG_HOTPLUG and built into kernel, we should
- * leave the driver around for future hotplug events.
- * For the module case, a hotplug daemon of some sort
- * should load a module in response to an insert event. */
-#if defined(CONFIG_HOTPLUG) && !defined(MODULE)
- if (rc == 0)
- return 0;
-#else
- if (rc == 0)
- rc = -ENODEV;
-#endif
-
- /* if we get here, we need to clean up pci driver instance
- * and return some sort of error */
- ocp_unregister_driver (drv);
-
- return rc;
+ pdev->drvdata = data;
}
#if defined (CONFIG_PM)
static inline void
ocp_force_power_off(struct ocp_device *odev)
{
- mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->pm);
+ mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->def->pm);
}
static inline void
ocp_force_power_on(struct ocp_device *odev)
{
- mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->pm);
+ mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->def->pm);
}
#else
#define ocp_force_power_off(x) (void)(x)
#define ocp_force_power_on(x) (void)(x)
#endif
-extern void ocp_init(void);
-extern struct bus_type ocp_bus_type;
-extern struct ocp_device *ocp_get_dev(unsigned int device, int index);
-extern unsigned int ocp_get_num(unsigned int device);
+/* Register/Unregister an OCP driver */
+extern int ocp_register_driver(struct ocp_driver *drv);
+extern void ocp_unregister_driver(struct ocp_driver *drv);
-extern int ocp_generic_suspend(struct ocp_device *pdev, u32 state);
-extern int ocp_generic_resume(struct ocp_device *pdev);
+/* Build list of devices */
+extern int ocp_early_init(void) __init;
+
+/* Find a device by index */
+extern struct ocp_device *ocp_find_device(unsigned int vendor, unsigned int function, int index);
+
+/* Get a def by index */
+extern struct ocp_def *ocp_get_one_device(unsigned int vendor, unsigned int function, int index);
+
+/* Add a device by index */
+extern int ocp_add_one_device(struct ocp_def *def);
+
+/* Remove a device by index */
+extern int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index);
+
+/* Iterate over devices and execute a routine */
+extern void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg);
+
+/* Sysfs support */
+#define OCP_SYSFS_ADDTL(type, format, name, field) \
+static ssize_t \
+show_##name##_##field(struct device *dev, char *buf) \
+{ \
+ struct ocp_device *odev = to_ocp_dev(dev); \
+ type *add = odev->def->additions; \
+ \
+ return sprintf(buf, format, add->field); \
+} \
+static DEVICE_ATTR(name##_##field, S_IRUGO, show_##name##_##field, NULL);
+
+#ifdef CONFIG_IBM_OCP
+#include <asm/ibm_ocp.h>
+#endif
#endif /* __OCP_H__ */
#endif /* __KERNEL__ */
/*
- * FILE NAME: ocp_ids.h
+ * ocp_ids.h
*
- * BRIEF MODULE DESCRIPTION:
* OCP device ids based on the ideas from PCI
*
- * Maintained by: Armin <akuster@mvista.com>
+ * The numbers below are almost completely arbitrary, and in fact
+ * strings might work better. -- paulus
*
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Version 1.0 08/22/02 -Armin
- * initial release
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*/
/*
#define OCP_VENDOR_INVALID 0x0000
#define OCP_VENDOR_ARM 0x0004
+#define OCP_VENDOR_FREESCALE 0x1057
#define OCP_VENDOR_IBM 0x1014
-#define OCP_VENDOR_MOTOROLA 0x1057
+#define OCP_VENDOR_MOTOROLA OCP_VENDOR_FREESCALE
#define OCP_VENDOR_XILINX 0x10ee
#define OCP_VENDOR_UNKNOWN 0xFFFF
#define OCP_FUNC_INVALID 0x0000
/* system 0x0001 - 0x001F */
-#define OCP_FUNC_UIC 0x0001
/* Timers 0x0020 - 0x002F */
-#define OCP_FUNC_GPT 0x0020 /* General purpose timers */
-#define OCP_FUNC_RTC 0x0021
/* Serial 0x0030 - 0x006F*/
#define OCP_FUNC_16550 0x0031
-#define OCP_FUNC_SSP 0x0032 /* sync serial port */
-#define OCP_FUNC_SCP 0x0033 /* serial controller port */
-#define OCP_FUNC_SCC 0x0034 /* serial contoller */
-#define OCP_FUNC_SCI 0x0035 /* Smart card */
-#define OCP_FUNC_IIC 0x0040
-#define OCP_FUNC_USB 0x0050
-#define OCP_FUNC_IR 0x0060
+#define OCP_FUNC_IIC 0x0032
+#define OCP_FUNC_USB 0x0033
/* Memory devices 0x0090 - 0x009F */
-#define OCP_FUNC_SDRAM 0x0091
-#define OCP_FUNC_DMA 0x0092
+#define OCP_FUNC_MAL 0x0090
/* Display 0x00A0 - 0x00AF */
-#define OCP_FUNC_VIDEO 0x00A0
-#define OCP_FUNC_LED 0x00A1
-#define OCP_FUNC_LCD 0x00A2
/* Sound 0x00B0 - 0x00BF */
-#define OCP_FUNC_AUDIO 0x00B0
/* Mass Storage 0x00C0 - 0xxCF */
#define OCP_FUNC_IDE 0x00C0
/* Misc 0x00D0 - 0x00DF*/
#define OCP_FUNC_GPIO 0x00D0
#define OCP_FUNC_ZMII 0x00D1
+#define OCP_FUNC_PERFMON 0x00D2 /* Performance Monitor */
+#define OCP_FUNC_RGMII 0x00D3
+#define OCP_FUNC_TAH 0x00D4
/* Network 0x0200 - 0x02FF */
#define OCP_FUNC_EMAC 0x0200
+#define OCP_FUNC_ENET 0x0201 /* TSEC & FEC */
/* Bridge devices 0xE00 - 0xEFF */
-#define OCP_FUNC_HOST 0x0E00
-#define OCP_FUNC_DCR 0x0E01
-#define OCP_FUNC_OPB 0x0E02
-#define OCP_FUNC_PHY 0x0E03
-#define OCP_FUNC_EXT 0x0E04
-#define OCP_FUNC_PCI 0x0E05
-#define OCP_FUNC_PLB 0x0E06
+#define OCP_FUNC_OPB 0x0E00
#define OCP_FUNC_UNKNOWN 0xFFFF
projects / linux / commitdiff