common. Some of the built-in wireless adaptors in laptops are of
this variety.
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on NET_RADIO && EXPERIMENTAL
+ enable FW_LOADER
+ enable CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ http://www.thekelleys.org.uk/atmel
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
# If Pcmcia is compiled in, offer Pcmcia cards...
comment "Wireless 802.11b Pcmcia/Cardbus cards support"
depends on NET_RADIO && PCMCIA
available from <http://www.tldp.org/docs.html#howto>.
config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on NET_RADIO && EXPERIMENTAL && PCMCIA
- select FW_LOADER
- select CRC32
- ---help---
- A driver for PCMCIA 802.11 wireless cards based on the
- Atmel fast-vnet chips. This driver supports standard
- Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- http://www.thekelleys.org.uk/atmel
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on NET_RADIO && ATMEL && PCMCIA
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
obj-$(CONFIG_AIRO) += airo.o
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
+obj-$(CONFIG_ATMEL) += atmel.o
+obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
+obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
+
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
-obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o atmel.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
This file contains the module in binary form and, under the terms
of the GPL, in source form. The source is located at the end of the file.
- For all queries about this code, please contact the current author,
- Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
-
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
along with Atmel wireless lan drivers; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ For all queries about this code, please contact the current author,
+ Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+ Credit is due to HP UK and Cambridge Online Systems Ltd for supplying
+ hardware used during development of this driver.
+
******************************************************************************/
#include <linux/config.h>
#include "ieee802_11.h"
#define DRIVER_MAJOR 0
-#define DRIVER_MINOR 9
+#define DRIVER_MINOR 91
MODULE_AUTHOR("Simon Kelley");
MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
CARD_TYPE_SPI_FLASH,
CARD_TYPE_EEPROM
} card_type;
- int is3com; /* is this a 3com card? they are uniquely borken */
int do_rx_crc; /* If we need to CRC incoming packets */
int probe_crc; /* set if we don't yet know */
int crc_ok_cnt, crc_ko_cnt; /* counters for probing */
u8 group_cipher_suite, pairwise_cipher_suite;
u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
int wep_key_len[MAX_ENCRYPTION_KEYS];
- int use_wpa;
+ int use_wpa, radio_on_broken; /* firmware dependent stuff. */
u16 host_info_base;
struct host_info_struct {
return len;
}
-struct net_device *init_atmel_card( unsigned short irq, int port, char *firmware_id, int is3com,
+struct net_device *init_atmel_card( unsigned short irq, int port, char *firmware_id,
struct device *sys_dev, int (*card_present)(void *), void *card)
{
struct net_device *dev;
strcpy(priv->firmware_template, firmware_id);
priv->bus_type = card_present ? BUS_TYPE_PCCARD : BUS_TYPE_PCI;
priv->station_state = STATION_STATE_DOWN;
- priv->is3com = is3com;
priv->do_rx_crc = 0;
/* For PCMCIA cards, some chips need CRC, some don't
so we have to probe. */
void stop_atmel_card(struct net_device *dev, int freeres)
{
struct atmel_private *priv = dev->priv;
- unregister_netdev(dev);
-
+
/* put a brick on it... */
-
if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
atmel_write16(dev, GCR, 0x0040);
-
- remove_proc_entry("driver/atmel", NULL);
+
del_timer_sync(&priv->management_timer);
+ unregister_netdev(dev);
+ remove_proc_entry("driver/atmel", NULL);
free_irq(dev->irq, dev);
if (priv->firmware)
kfree(priv->firmware);
/* If setting by frequency, convert to a channel */
if((fwrq->e == 1) &&
- (fwrq->m >= (int) 2.412e8) &&
- (fwrq->m <= (int) 2.487e8)) {
+ (fwrq->m >= (int) 241200000) &&
+ (fwrq->m <= (int) 248700000)) {
int f = fwrq->m / 100000;
int c = 0;
while((c < 14) && (f != frequency_list[c]))
return 0;
/* Check the version and set the correct flag for wpa stuff,
- old and new firmware is incompatible. */
- priv->use_wpa = (priv->host_info.major_version >= 4);
+ old and new firmware is incompatible.
+ The pre-wpa 3com firmware reports major version 5,
+ the wpa 3com firmware is major version 4 and doesn't need
+ the 3com broken-ness filter. */
+ priv->use_wpa = (priv->host_info.major_version == 4);
+ priv->radio_on_broken = (priv->host_info.major_version == 5);
/* unmask all irq sources */
atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff);
if ((channel = atmel_validate_channel(priv, priv->channel)))
priv->channel = channel;
- if (!priv->is3com) {
+ if (!priv->radio_on_broken) {
if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
CMD_STATUS_REJECTED_RADIO_OFF) {
printk(KERN_INFO
atmel_write16(priv->dev, DR, data >> 16);
}
-
/***************************************************************************/
/* There follows the source form of the MAC address reading firmware */
/***************************************************************************/
event handler.
*/
-struct net_device *init_atmel_card(int, int, char *, int, struct device *,
+struct net_device *init_atmel_card(int, int, char *, struct device *,
int (*present_func)(void *), void * );
void stop_atmel_card( struct net_device *, int );
int reset_atmel_card( struct net_device * );
{ 0, 0, "ATMEL/AT76C502AR_D", "atmel_at76c502d%s.bin", "NoName-revD" },
{ 0, 0, "ATMEL/AT76C502AR_E", "atmel_at76c502e%s.bin", "NoName-revE" },
{ 0, 0, "ATMEL/AT76C504", "atmel_at76c504%s.bin", "NoName-504" },
+ { 0, 0, "ATMEL/AT76C504A", "atmel_at76c504a_2958%s.bin", "NoName-504a-2958" },
+ { 0, 0, "ATMEL/AT76C504_R", "atmel_at76c504_2958%s.bin", "NoName-504-2958" },
{ MANFID_3COM, 0x0620, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRWE62092B" },
{ MANFID_3COM, 0x0696, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRSHPW_96" },
{ 0, 0, "SMC/2632W-V2", "atmel_at76c502%s.bin", "SMC 2632W-V2" },
{ 0, 0, "SMC/2632W", "atmel_at76c502d%s.bin", "SMC 2632W-V3" },
- { 0xd601, 0x0007, NULL, "atmel_at76c502%s.bin", "Sitecom WLAN-011"}, /* suspect - from a usenet posting. */
- { 0x01bf, 0x3302, NULL, "atmel_at76c502d%s.bin", "Belkin F5D6060u"}, /* " " " " " */
- { 0, 0, "BT/Voyager 1020 Laptop Adapter", "atmel_at76c502%s.bin", "BT Voyager 1020"},
+ { 0xd601, 0x0007, NULL, "atmel_at76c502%s.bin", "Sitecom WLAN-011" },
+ { 0x01bf, 0x3302, NULL, "atmel_at76c502e%s.bin", "Belkin F5D6020-V2" },
+ { 0, 0, "BT/Voyager 1020 Laptop Adapter", "atmel_at76c502%s.bin", "BT Voyager 1020" },
{ 0, 0, "IEEE 802.11b/Wireless LAN PC Card", "atmel_at76c502%s.bin", "Siemens Gigaset PC Card II" },
- { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", "atmel_at76c502e%s.bin", "CNet CNWLC-811ARL" }
+ { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", "atmel_at76c502e%s.bin", "CNet CNWLC-811ARL" },
+ { 0, 0, "Wireless/PC_CARD", "atmel_at76c502d%s.bin", "Planet WL-3552" },
+ { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", "atmel_at76c502%s.bin", "OEM 11Mbps WLAN PCMCIA Card" },
+ { 0, 0, "11WAVE/11WP611AL-E", "atmel_at76c502e%s.bin", "11WAVE WaveBuddy" }
};
/* This is strictly temporary, until PCMCIA devices get integrated into the device model. */
init_atmel_card(link->irq.AssignedIRQ,
link->io.BasePort1,
card_index == -1 ? NULL : card_table[card_index].firmware,
- card_index == -1 ? 0 : (card_table[card_index].manf == MANFID_3COM),
&atmel_device,
card_present,
link);
--- /dev/null
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2004 Simon Kelley.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+******************************************************************************/
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Atmel at76c506 PCI wireless cards");
+
+static struct pci_device_id card_ids[] = {
+ { 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, card_ids);
+
+static int atmel_pci_probe(struct pci_dev *, const struct pci_device_id *);
+static void atmel_pci_remove(struct pci_dev *);
+struct net_device *init_atmel_card(int, int, char *, struct device *,
+ int (*present_func)(void *), void * );
+void stop_atmel_card( struct net_device *, int );
+
+static struct pci_driver atmel_driver = {
+ .name = "atmel",
+ .id_table = card_ids,
+ .probe = atmel_pci_probe,
+ .remove = __devexit_p(atmel_pci_remove),
+};
+
+
+static int __devinit atmel_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pent)
+{
+ struct net_device *dev;
+
+ if (pci_enable_device(pdev))
+ return -ENODEV;
+
+ pci_set_master(pdev);
+
+ dev = init_atmel_card(pdev->irq, pdev->resource[1].start,
+ "atmel_at76c506%s.bin",
+ &pdev->dev, NULL, NULL);
+ if (!dev)
+ return -ENODEV;
+
+ pci_set_drvdata(pdev, dev);
+ return 0;
+}
+
+static void __devexit atmel_pci_remove(struct pci_dev *pdev)
+{
+ stop_atmel_card(pci_get_drvdata(pdev), 1);
+}
+
+static int __init atmel_init_module(void)
+{
+ return pci_module_init(&atmel_driver);
+}
+
+static void __exit atmel_cleanup_module(void)
+{
+ pci_unregister_driver(&atmel_driver);
+}
+
+module_init(atmel_init_module);
+module_exit(atmel_cleanup_module);
projects / linux / commitdiff