--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8M IOMUX Controller
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-iomuxc
+ - fsl,imx8mn-iomuxc
+ - fsl,imx8mp-iomuxc
+ - fsl,imx8mq-iomuxc
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>.
+ The last integer CONFIG is the pad setting value like pull-up on this
+ pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for
+ detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be
+ applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ iomuxc: pinctrl@30330000 {
+ compatible = "fsl,imx8mm-iomuxc";
+ reg = <0x30330000 0x10000>;
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins =
+ <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>,
+ <0x240 0x4A8 0x000 0x0 0x0 0x140>;
+ };
+ };
+
+...
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MM IOMUX Controller
-
-maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
-
-description:
- Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
- for common binding part and usage.
-
-properties:
- compatible:
- const: fsl,imx8mm-iomuxc
-
- reg:
- maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
- 'grp$':
- type: object
- description:
- Pinctrl node's client devices use subnodes for desired pin configuration.
- Client device subnodes use below standard properties.
-
- properties:
- fsl,pins:
- description:
- each entry consists of 6 integers and represents the mux and config
- setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
- mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
- be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
- integer CONFIG is the pad setting value like pull-up on this pin. Please
- refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
- $ref: /schemas/types.yaml#/definitions/uint32-matrix
- items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
-
- required:
- - fsl,pins
-
- additionalProperties: false
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- # Pinmux controller node
- - |
- iomuxc: pinctrl@30330000 {
- compatible = "fsl,imx8mm-iomuxc";
- reg = <0x30330000 0x10000>;
-
- pinctrl_uart2: uart2grp {
- fsl,pins =
- <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>,
- <0x240 0x4A8 0x000 0x0 0x0 0x140>;
- };
- };
-
-...
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MN IOMUX Controller
-
-maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
-
-description:
- Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
- for common binding part and usage.
-
-properties:
- compatible:
- const: fsl,imx8mn-iomuxc
-
- reg:
- maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
- 'grp$':
- type: object
- description:
- Pinctrl node's client devices use subnodes for desired pin configuration.
- Client device subnodes use below standard properties.
-
- properties:
- fsl,pins:
- description:
- each entry consists of 6 integers and represents the mux and config
- setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
- mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
- be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
- integer CONFIG is the pad setting value like pull-up on this pin. Please
- refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
- $ref: /schemas/types.yaml#/definitions/uint32-matrix
- items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
-
- required:
- - fsl,pins
-
- additionalProperties: false
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- # Pinmux controller node
- - |
- iomuxc: pinctrl@30330000 {
- compatible = "fsl,imx8mn-iomuxc";
- reg = <0x30330000 0x10000>;
-
- pinctrl_uart2: uart2grp {
- fsl,pins =
- <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>,
- <0x240 0x4A8 0x000 0x0 0x0 0x140>;
- };
- };
-
-...
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MP IOMUX Controller
-
-maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
-
-description:
- Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
- for common binding part and usage.
-
-properties:
- compatible:
- const: fsl,imx8mp-iomuxc
-
- reg:
- maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
- 'grp$':
- type: object
- description:
- Pinctrl node's client devices use subnodes for desired pin configuration.
- Client device subnodes use below standard properties.
-
- properties:
- fsl,pins:
- description:
- each entry consists of 6 integers and represents the mux and config
- setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
- mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
- be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
- integer CONFIG is the pad setting value like pull-up on this pin. Please
- refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
- $ref: /schemas/types.yaml#/definitions/uint32-matrix
- items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
-
- required:
- - fsl,pins
-
- additionalProperties: false
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- # Pinmux controller node
- - |
- iomuxc: pinctrl@30330000 {
- compatible = "fsl,imx8mp-iomuxc";
- reg = <0x30330000 0x10000>;
-
- pinctrl_uart2: uart2grp {
- fsl,pins =
- <0x228 0x488 0x5F0 0x0 0x6 0x49>,
- <0x228 0x488 0x000 0x0 0x0 0x49>;
- };
- };
-
-...
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MQ IOMUX Controller
-
-maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
-
-description:
- Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
- for common binding part and usage.
-
-properties:
- compatible:
- const: fsl,imx8mq-iomuxc
-
- reg:
- maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
- 'grp$':
- type: object
- description:
- Pinctrl node's client devices use subnodes for desired pin configuration.
- Client device subnodes use below standard properties.
-
- properties:
- fsl,pins:
- description:
- each entry consists of 6 integers and represents the mux and config
- setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
- mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
- be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
- integer CONFIG is the pad setting value like pull-up on this pin. Please
- refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
- $ref: /schemas/types.yaml#/definitions/uint32-matrix
- items:
- items:
- - description: |
- "mux_reg" indicates the offset of mux register.
- - description: |
- "conf_reg" indicates the offset of pad configuration register.
- - description: |
- "input_reg" indicates the offset of select input register.
- - description: |
- "mux_val" indicates the mux value to be applied.
- - description: |
- "input_val" indicates the select input value to be applied.
- - description: |
- "pad_setting" indicates the pad configuration value to be applied.
-
- required:
- - fsl,pins
-
- additionalProperties: false
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- # Pinmux controller node
- - |
- iomuxc: pinctrl@30330000 {
- compatible = "fsl,imx8mq-iomuxc";
- reg = <0x30330000 0x10000>;
-
- pinctrl_uart1: uart1grp {
- fsl,pins =
- <0x234 0x49C 0x4F4 0x0 0x0 0x49>,
- <0x238 0x4A0 0x4F4 0x0 0x0 0x49>;
- };
- };
-
-...
projects / linux / commitdiff