This patchset adds support for Push/Pull mode modules.
Push-pull mode uses dedicated shared-memory modules that allow the DSP
to access the PCM circular buffer directly. In addition to reducing
fragment queueing and ACK handling in the host driver,
This mode exposes a DSP-maintained position buffer that provides
fine-grained hardware pointer updates. Unlike the Read/Write Shared
Memory endpoitn modules, which are period based, where the reported
pointer advances only at period boundaries, where as push-pull mode
allows .pointer() to reflect sub-period progress, improving pointer
accuracy.
Also the driver now can queue buffers which are less than period size,
which makes tests like alsa_conformance_test happy.
Now the pointer update visibility is around 1ms, compared to min of
10ms with read/write shared memory endpoints.
Along with the circular buffer support, this patchset also adds
watermark event support to provide a period level event from dsp to
notify about period progress.
Tested this on T14s, Arduino VENTUNO-Q platforms.
Tplg related changes are available at:
https://github.com/Srinivas-Kandagatla/audioreach-topology/tree/push/pull
ASoC: qcom: q6apm-dai: add push-pull and watermark event support
Wire q6apm-dai to use push-pull shared memory graphs.
For push-pull graphs, configure the circular buffer and position buffer,
register watermark events, and use watermark notifications to report PCM
period elapsed. Skip legacy fragment queueing and ACK handling because the
DSP reads/writes directly from the shared circular buffer.
Push-pull shared memory modules can report watermark events when the DSP
read/write index reaches configured circular buffer levels.
Add support for registering watermark levels with the shared memory module
and route the resulting module event to q6apm clients using a new
APM_CLIENT_EVENT_WATERMARK_EVENT event.
ASoC: qcom: audioreach: Add support for shared memory push/pull modules
Push-pull graphs use MODULE_ID_SH_MEM_PULL_MODE for playback and
MODULE_ID_SH_MEM_PUSH_MODE for capture instead of the legacy WR/RD shared
memory endpoints. Detect these modules when opening the graph, cache their
instance ID in graph->shm_iid, and use them for media format setup.
Also add support for mapping the position buffer required by push-pull mode
and configuring the DSP with circular buffer and position buffer addresses.
The shared memory module instance ID is now cached in graph->shm_iid when
the graph is opened. The old WR/RD shared memory IID helper functions are
no longer used.
ASoC: qcom: q6apm: return error code to consumers on failures
Return errors from audioreach_set_media_format() to ensure callers are
notified when media format setup fails.
This could hide failures while programming media format parameters for
individual modules and allow graph setup to continue with incomplete
configuration.
ASoC: qcom: audioreach: use cached shared memory module IID
audioreach currently calls q6apm_graph_get_rx_shmem_module_iid() to get
the shared memory module IID.
The graph already caches this value in graph->shm_iid, so use it directly
in audioreach_compr_set_param() and audioreach_shared_memory_send_eos().
This prepares for removing the helper in a later patch.
This series converts mutex and spinlock handling in the STI drivers
to use guard() helpers.
The changes are code cleanup only and should have no functional impact.
Compile tested only.
This series adds K3 SoC support for the SpacemiT I2S controller driver.
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible. The K3
SoC uses the same I2S IP as K1 but requires additional clocks
(sysclk_div, c_sysclk, c_bclk) that are shared across multiple I2S
controllers.
Patch 2 adds driver support for K3 SoC with additional clocks.
Troy Mitchell [Fri, 22 May 2026 13:12:15 +0000 (21:12 +0800)]
ASoC: spacemit: add K3 SoC support with additional clocks
Add support for the SpacemiT K3 SoC I2S controller, which shares the
same IP as K1 but requires additional clocks: sysclk_div, c_sysclk,
and c_bclk. These clocks only exist on K3 and are not present on K1.
The sysclk_div clock is present on most K3 I2S controllers except I2S1.
The c_sysclk and c_bclk clocks are shared across multiple I2S
controllers on K3.
Use devm_clk_get_optional_enabled() to acquire these clocks so that
the driver works on both K1 (where they are absent) and K3 without
needing SoC-specific match data. For K3, the sysclk_div rate is set
before sysclk in set_sysclk, and the common clock rates are configured
in hw_params based on the sample rate.
Troy Mitchell [Fri, 22 May 2026 13:12:14 +0000 (21:12 +0800)]
ASoC: dt-bindings: add SpacemiT K3 SoC compatible
Add the spacemit,k3-i2s compatible string for the K3 SoC I2S
controller. The K3 I2S IP is the same as K1 but requires additional
clocks: a dedicated sysclk_div clock, along with common_sysclk and
common_bclk which are shared across multiple I2S controllers on K3.
Rosen Penev [Sat, 23 May 2026 01:17:49 +0000 (18:17 -0700)]
ASoC: aw88395: use struct_size() and __counted_by() for aw_container
The firmware container allocations passed cont->size + sizeof(int) to
kzalloc(), which was wrong: the struct contains an int len followed by a
u8 data[] flexible array. It ended up being the same as the struct's
size is only the int member but still wrong.
Mark Brown [Mon, 1 Jun 2026 14:52:59 +0000 (15:52 +0100)]
ASoC: codecs: pcm3168a: Fix and updates for power management
Cezary Rojewski <cezary.rojewski@intel.com> says:
Set of changes composed of one fix and two improvements.
The fix leads the series and addresses "unbalanced disables" coming from
the regulator core during S4 (hibernation) scenario.
The SLEEP_PM_OPS are unset for the driver. Hibernation (S4) causes no
resume (skipped thanks to smart_suspend=true) yet still performs the
suspend sequence unconditionally, see device_complete() in
drivers/base/power/main.c. In essence, we end up with double suspend
(double disable) and thus the warning. Exemplary stack:
In regard to the improvements, both aim to drop redundant operations.
One targets pm_runtime_idle() - no need to fire it manually,
device-driver core will do that for us - while the second replaces
preprocessor directive with pm_runtime_status_suspended() check.
No !CONFIG_PM dependency equals better code coverege with default
kconfigs.
Cezary Rojewski [Mon, 25 May 2026 20:17:59 +0000 (22:17 +0200)]
ASoC: codecs: pcm3168a: Prevent regulator double-disable in S4
The SLEEP_PM_OPS are unset for the driver. Hibernation (S4) causes no
resume (skipped thanks to smart_suspend=true) yet still performs the
suspend sequence unconditionally, see device_complete() in
drivers/base/power/main.c.
If S4 runs for already suspended pcm3168a device, we end up with
"unbalanced disables" warning from the regulators. Assigning the
operations fixes the problem.
Mark Brown [Mon, 1 Jun 2026 14:30:29 +0000 (15:30 +0100)]
ASoC: rsnd: Add RZ/G3E audio driver support
John Madieu <john.madieu.xa@bp.renesas.com> says:
Add audio support for the Renesas RZ/G3E SoC to the R-Car Sound
driver. The RZ/G3E audio subsystem is based on R-Car Sound IP but
has several differences requiring dedicated handling:
- SSI operates exclusively in BUSIF mode (no PIO)
- 2-4 BUSIF channels per SSI (layout differs from R-Car)
- Separate register regions for SCU, ADG, SSIU, SSI accessed by name
- Per-SSI ADG and SSIF supply clocks
- Dedicated audmapp clock/reset for Audio DMAC peri-peri
- Per-SSI and per-module reset controllers via CPG
- Unprefixed DT sub-node names (ssi, ssiu, src, ...) instead of
rcar_sound,xxx
- Hyphenated indexed clock/reset names (ssi-0, src-0, adg-ssi-0,
audio-clka, ...) instead of the legacy dotted form
John Madieu [Mon, 25 May 2026 11:02:30 +0000 (11:02 +0000)]
ASoC: rsnd: Add system suspend/resume support
Add system suspend/resume support for the ASoC rsnd driver, required
for RZ/G3E platforms. Distribute the per-module suspend/resume work
across the relevant files (adg.c, ssi.c, ssiu.c, src.c, ctu.c, mix.c,
dvc.c, dma.c) rather than centralising it in core.c.
John Madieu [Mon, 25 May 2026 11:02:29 +0000 (11:02 +0000)]
ASoC: rsnd: Support unprefixed DT node names for RZ/G3E
The RZ/G3E device tree binding uses standard unprefixed node names
("ssi", "ssiu", "src", "dvc", "mix", "ctu") instead of the legacy
"rcar_sound," prefixed names used by R-Car bindings.
Convert rsnd_parse_of_node() from a macro into a function that tries
the legacy prefixed name first, then falls back to the unprefixed name
by stripping the "rcar_sound," prefix. This makes the driver work
transparently with both old and new bindings.
While at it, update the related comments in dma.c, ssi.c and ssiu.c
that reference the hardcoded "rcar_sound,ssiu" / "rcar_sound,ssi"
names to note that the driver now accepts both the prefixed and the
unprefixed forms.
John Madieu [Mon, 25 May 2026 11:02:28 +0000 (11:02 +0000)]
ASoC: rsnd: src: Add SRC reset support for RZ/G3E
The RZ/G3E SoC exposes a shared SCU reset controller used by all SRC
modules. Acquire it once and pass it through per-instance's
rsnd_mod_init() so it is wired into the rsnd_mod->rstc plumbing.
devm_reset_control_get_optional_shared() returns NULL when no reset
is described in DT, leaving existing R-Car generations unaffected.
Without every one of them enabled, no SCU register is reachable.
Hold these in a new struct rsnd_src_ctrl and acquire them with
devm_clk_get_optional_enabled(). scu_supply is intentionally left
untouched by the system suspend/resume path added later in the
series, so SCU registers stay reachable across PM transitions.
John Madieu [Mon, 25 May 2026 11:02:26 +0000 (11:02 +0000)]
ASoC: rsnd: adg: Look up RZ/G3E clkin under audio-clk{a,b,c,i}
The R-Car Sound ADG block has up to four external master-clock inputs
named CLKA, CLKB, CLKC and CLKI by the silicon. On Gen2 R-Car these
come from DT under the legacy names "clk_a", "clk_b", "clk_c", "clk_i"
defined by renesas,rsnd.yaml. Gen4 collapses them to a single "clkin".
The new standalone RZ/G3E sound binding (renesas,r9a09g047-sound.yaml)
uses the standard DT naming convention with a vendor-meaningful prefix
that matches the SoC datasheet pin labels: "audio-clka", "audio-clkb",
"audio-clkc", "audio-clki".
Add a third clkin name table for RZ/G3E and dispatch to it from
rsnd_adg_get_clkin() in the same style as the existing Gen4 branch.
The CLKA/B/C/I enum values, the clkin[] array, and the BRGA/BRGB
derivation are unchanged - only the DT lookup names differ.
John Madieu [Mon, 25 May 2026 11:02:24 +0000 (11:02 +0000)]
ASoC: rsnd: Add ADG reset support for RZ/G3E
RZ/G3E requires the ADG reset line to be deasserted for the audio
subsystem to operate. The ADG module clock is already managed via
rsnd_adg_clk_enable/disable() through adg->adg, so no additional
clock handling is needed.
Add support for the optional "adg" reset control on Renesas RZ/G3E SoC.
John Madieu [Mon, 25 May 2026 11:02:23 +0000 (11:02 +0000)]
ASoC: rsnd: Add SSI reset support for RZ/G3E platform
Acquire the per-SSI reset controller and pass it through
rsnd_mod_init() so it is wired into the rsnd_mod->rstc plumbing.
The RZ/G3E SoC exposes one reset line per SSI instance. Use the
indexed-name rsnd_devm_reset_control_get_optional_indexed() helper
so the same code accepts both the hyphenated RZ/G3E names
("ssi-0", "ssi-1", ...) and the legacy dotted names used by R-Car
("ssi.0", ...).
The helper returns NULL when no reset is described in DT, leaving
existing R-Car generations unaffected.
The RZ/G3E also has only two pairs of BUSIF error-status registers
instead of four, and the SSI always operates in BUSIF mode: the
SSI_MODE0 BUSIF/PIO select bit is not implemented and must not be written.
While at it, add RSND_SSIU_BUSIF_STATUS_COUNT_2 as a capability flag in
the match data, consumed via struct rsnd_ssiu_ctrl, to parametrise the two
BUSIF error-status loops.
John Madieu [Mon, 25 May 2026 11:02:21 +0000 (11:02 +0000)]
ASoC: rsnd: ssiu: Add shared SSI reset controller support
The RZ/G3E SoC exposes a single shared "ssi-all" reset that gates all
SSI/SSIU modules. Acquire it at SSIU probe and pass it through
rsnd_mod_init() so it is wired into the rsnd_mod->rstc plumbing.
devm_reset_control_get_optional_shared() returns NULL when no reset is
described in DT, leaving existing R-Car generations unaffected.
John Madieu [Mon, 25 May 2026 11:02:20 +0000 (11:02 +0000)]
ASoC: rsnd: Add RZ/G3E DMA address calculation support
RZ/G3E has different DMA register base addresses and offset
calculations compared to R-Car platforms.
Add dedicated rsnd_rzg3e_dma_addr() function with dispatch from
rsnd_dma_addr(), following the existing per-generation pattern.
The function reuses rsnd_dma_addr_lookup() and rsnd_dma_addr_map.
John Madieu [Mon, 25 May 2026 11:02:19 +0000 (11:02 +0000)]
ASoC: rsnd: Refactor DMA address tables with named structs
Replace the raw multi-dimensional array used for DMA address lookup in
rsnd_gen2_dma_addr() with properly named structs: rsnd_dma_addr (in/out
pair), rsnd_dma_addr_dir (capture/playback arrays), and
rsnd_dma_addr_map (src/ssi/ssiu module sets).
While at it, extract the common lookup logic (is_ssi / use_src / use_cmd
evaluation and table indexing) into a shared rsnd_dma_addr_lookup()
function.
No functional change. This is a preparatory refactor for upcoming RZ/G3E
support which will add its own DMA address map using the same struct and
lookup function.
John Madieu [Mon, 25 May 2026 11:02:17 +0000 (11:02 +0000)]
ASoC: rsnd: Add RZ/G3E SoC probing and register map
RZ/G3E audio subsystem has a different register layout compared to
R-Car Gen2/Gen3/Gen4, as described below:
- Different base address organization (SCU, ADG, SSIU, SSI as
separate regions accessed by name)
- Additional registers: AUDIO_CLK_SEL3, SSI_MODE3, SSI_CONTROL2
- Different register offsets within each region
Add RZ/G3E SoC's audio subsystem register layouts and probe support.
John Madieu [Mon, 25 May 2026 11:02:16 +0000 (11:02 +0000)]
ASoC: rsnd: Support hyphen or dot in indexed clock and reset names
The rsnd driver historically looks up per-instance clocks and resets
using dot-separated names matching the ones declared in R-Car device
tree bindings ("ssi.0", "src.0", "adg.ssi.0", ...). The dot separator
is unusual for device tree clock-names / reset-names and newer
Renesas SoC bindings (RZ/G3E and later) use the more standard hyphen
form ("ssi-0", "src-0", ...).
Rather than force every existing R-Car user to rename their DT entries,
add a small set of helpers that try the hyphen form first and fall
back to the dot form. While at it, convert the existing indexed
devm_clk_get() call sites in the SSI, SRC, CTU, DVC and MIX probes to use
the new helpers and drop the now unused per-module name buffers and
NAME_SIZE defines.
John Madieu [Mon, 25 May 2026 11:02:15 +0000 (11:02 +0000)]
ASoC: rsnd: Add reset controller support to rsnd_mod
The RZ/G3E SoC requires per-module reset control for the audio subsystem.
Add reset controller support to struct rsnd_mod and update rsnd_mod_init()
to accept and handle a reset_control parameter and mirror it in
rsnd_mod_quit().
John Madieu [Mon, 25 May 2026 11:02:14 +0000 (11:02 +0000)]
ASoC: rsnd: Fix RSND_SOC_MASK width to single nibble
RSND_SOC_MASK was defined as (0xFF << 4), spanning bits 4-11. This is
wider than needed since only nibble B (bits 7:4) is used for SoC
identifiers. Narrow it to (0xF << 4) to match the intended single-nibble
allocation and prevent overlap with bits 8-11 which will be used by
upcoming RZ series flags.
No functional change, since the only current user (RSND_SOC_E) fits
within a single nibble.
Fixes: ba164a49f8f7 ("ASoC: rsnd: src: Avoid a potential deadlock") Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260525110230.4014435-3-john.madieu.xa@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
John Madieu [Mon, 25 May 2026 11:02:13 +0000 (11:02 +0000)]
ASoC: dt-bindings: sound: Add DT binding for RZ/G3E sound
Add a standalone device tree binding for the Renesas RZ/G3E (R9A09G047)
sound controller.
The RZ/G3E sound IP is based on R-Car Sound but differs in several ways:
- Uses unprefixed sub-node names (ssi, ssiu, src, dvc, mix, ctu) instead
of R-Car's rcar_sound,xxx prefixed names.
- Supports up to 5 DMA controllers per direction, allowing multiple DMA
entries with repeated channel names in SSIU, SRC and DVC sub-nodes.
- Has 47 clocks including per-SSI ADG clocks (adg-ssi-[0-9]), SCU clocks
(scu, scu_x2, scu_supply), SSIF supply clock, AUDMAC peri-peri clock,
and ADG clock.
- Has 14 reset lines including SCU, ADG and AUDMAC peri-peri resets.
- SSI operates exclusively in BUSIF mode.
These differences make the RZ/G3E binding incompatible with the existing
renesas,rsnd.yaml, so it is added as a separate standalone binding with
its own $ref to dai-common.yaml.
Mark Brown [Mon, 1 Jun 2026 14:13:58 +0000 (15:13 +0100)]
ASoC: nau8822: add support for supply regulators
Alexey Charkov <alchark@flipper.net> says:
The Nuvoton NAU8822 codec has four power supply pins: VDDA, VDDB, VDDC
and VDDSPK, which must be online and stable before the device can be
accessed over I2C. On boards where these rails are software-controlled,
probing the codec before the regulators are up results in -ENXIO errors
during register access.
This short series adds optional regulator support to both the device
tree binding and the driver, so platforms that need explicit power
sequencing can describe and enforce it:
Alexey Charkov [Mon, 25 May 2026 09:20:46 +0000 (13:20 +0400)]
ASoC: codecs: nau8822: add support for supply regulators
NAU8822 has four power supply pins: VDDA, VDDB, VDDC, and VDDSPK, which
need to be online and stable before communication with the device is
attempted.
Request and enable these regulators at init time, if provided. Also wait
for 100 us after powering up the supply regulators before attempting to
access the device registers, as recommended by the datasheet.
This helps avoid -ENXIO errors when the codec is probed before the
regulators are ready.
Rosen Penev [Fri, 22 May 2026 01:45:15 +0000 (18:45 -0700)]
ASoC: mediatek: mt2701: fix snprintf bounds
For whatever reason, GCC is unable to figure out that i2s_num is a
single digit number, with MT2701_BASE_CLK_NUM being the maximum value it
represents. Add a min() call to help it out and fix W=1 errors regarding
snprintf bounds.
Linus Torvalds [Sun, 31 May 2026 18:50:39 +0000 (11:50 -0700)]
Merge tag 'media/v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- rc: igorplugusb: fix control request setup packet
- vsp1: revert a couple patches to fix regressions when setting DRM
pipelines
* tag 'media/v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rc: igorplugusb: fix control request setup packet
Revert "media: renesas: vsp1: brx: Fix format propagation"
Revert "media: renesas: vsp1: Initialize format on all pads"
Linus Torvalds [Sun, 31 May 2026 15:52:16 +0000 (08:52 -0700)]
Merge tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the clearcpuid= boot parameter less prominent
and warn about its dangers & caveats (Borislav Petkov)
- Do not access the (new) PLATFORM_ID MSR when running
as a guest (Borislav Petkov)
- x86 ftrace: Relocate %rip-relative percpu refs in dynamic
trampolines, to fix crash when using such trampolines
(Alexis Lothoré)
- Fix x86-64 CFI build error (Peter Zijlstra)
- Revert FPU signal return magic number check optimization,
because it broke CRIU and gVisor in certain FPU configurations
(Andrei Vagin)
* tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/fpu: Refine and simplify the magic number check during signal return"
x86/kvm/vmx: Fix x86_64 CFI build
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
x86/microcode: Do not access MSR_IA32_PLATFORM_ID when running as a guest
Documentation/arch/x86: Hide clearcpuid=
Linus Torvalds [Sun, 31 May 2026 15:45:08 +0000 (08:45 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes, the only one of significance being the change to
kick queues in SDEV_CANCEL which had a small window for stuck
requests.
The major driver fixes are the one to the FC transport class to widen
the FPIN counter to counter a theoretical (and privileged) fabric
traffic injection attack and the other is an iscsi fix where a
malicious target could trick the kernel into an output buffer overrun.
Both the driver fixes were AI assisted"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()
scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion
scsi: devinfo: Add BLIST_NO_RSOC for Promise VTrak E310f
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
Linus Torvalds [Sun, 31 May 2026 15:33:08 +0000 (08:33 -0700)]
Merge tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- davinci: fix fallback bus frequency on missing clock-frequency
- virtio: mark device ready initially
* tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: virtio: mark device ready before registering the adapter
i2c: davinci: fix division by zero on missing clock-frequency
Linus Torvalds [Sun, 31 May 2026 15:27:18 +0000 (08:27 -0700)]
Merge tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II
and "Nova 2 Lite" from GameSir controllers as well as a fix to
prevent a potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad
in Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when tearing
it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
* tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()
Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490
Input: atlas - check ACPI_COMPANION() against NULL
Input: atmel_mxt_ts - check mem_size before calculating config memory size
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
Input: fm801-gp - simplify initialisation of pci_device_id array
Input: xpad - add "Nova 2 Lite" from GameSir
Input: xpad - add support for ASUS ROG RAIKIRI II
Input: elan_i2c - validate firmware size before use
Input: xpad - fix out-of-bounds access for Share button
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
Input: elan_i2c - increase device reset wait timeout after update FW
Input: elan_i2c - add ic type 0x19
Linus Torvalds [Sun, 31 May 2026 00:05:58 +0000 (17:05 -0700)]
Merge tag 'v7.1-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix uninitialized variable in smb2_writev_callback()
- detect short folioq copy in cifs_copy_folioq_to_iter()
* tag 'v7.1-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix uninitialized variable in smb2_writev_callback
smb: client: detect short folioq copy in cifs_copy_folioq_to_iter()
Linus Torvalds [Sat, 30 May 2026 22:39:47 +0000 (15:39 -0700)]
Merge tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fixes from Mike Rapoport:
"Two kexec handover regression fixes:
- fix order calculation for kho_unpreserve_pages() to make sure sure
that the order calculation in kho_unpreserve_pages() mathes the
order calculation in kho_preserve_pages().
- fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with
16KB pages"
* tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix order calculation for kho_unpreserve_pages()
kho: fix KHO_TREE_MAX_DEPTH for non-4KB page sizes
Linus Torvalds [Sat, 30 May 2026 22:37:05 +0000 (15:37 -0700)]
Merge tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix regression from memblock_free_late() refactoring
After refactoring of memblock_free_late() and free_init_pages() it
became possible to call memblock_free() after memblock init data was
discarded.
Make sure memblock_free() does not touch memblock.reserved unless it
is called early enough or when ARCH_KEEP_MEMBLOCK is enabled"
* tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: don't touch memblock arrays when memblock_free() is called late
Henri A [Wed, 20 May 2026 14:25:44 +0000 (10:25 -0400)]
media: rc: igorplugusb: fix control request setup packet
Commit eac69475b01f ("media: rc: igorplugusb: heed coherency
rules") changed the control request storage from an embedded struct to
an allocated pointer so it can obey DMA coherency rules.
However, the driver still passes &ir->request to usb_fill_control_urb().
That points the URB setup packet at the pointer field itself rather than
at the allocated struct usb_ctrlrequest.
USB core then interprets pointer bytes as the setup packet. This can
produce an invalid bRequestType and trigger the control direction warning
reported by syzbot:
usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0
Pass ir->request itself as the setup packet.
Fixes: eac69475b01f ("media: rc: igorplugusb: heed coherency rules") Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51 Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5.5 Signed-off-by: Henri A <contact@henrialfonso.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Linus Torvalds [Sat, 30 May 2026 15:37:45 +0000 (08:37 -0700)]
Merge tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt fixes from Greg KH:
"Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device)
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits)
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
usb: dwc2: Fix use after free in debug code
usb: chipidea: core: convert ci_role_switch to local variable
usb: gadget: f_fs: serialize DMABUF cancel against request completion
usb: gadget: f_fs: copy only received bytes on short ep0 read
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
dt-bindings: usb: Fix EIC7700 USB reset's issue
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints
usb: storage: Add quirks for PNY Elite Portable SSD
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
usb: usbtmc: check URB actual_length for interrupt-IN notifications
xhci: tegra: Fix ghost USB device on dual-role port unplug
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
...
Linus Torvalds [Sat, 30 May 2026 15:34:03 +0000 (08:34 -0700)]
Merge tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: dz: Enable modular build
serial: zs: Convert to use a platform device
serial: dz: Convert to use a platform device
serial: zs: Switch to using channel reset
serial: zs: Fix bootconsole handover lockup
serial: dz: Fix bootconsole handover lockup
serial: dz: Fix bootconsole message clobbering at chip reset
serial: 8250_dw: dispatch SysRq character in dw8250_handle_irq()
serial: 8250: dispatch SysRq character in serial8250_handle_irq()
serial: core: introduce guard(uart_port_lock_check_sysrq_irqsave)
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
serial: altera_jtaguart: handle uart_add_one_port() failures
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
tty: add missing tty_driver include to tty_port.h
serial: qcom-geni: fix UART_RX_PAR_EN bit position
serial: sh-sci: fix memory region release in error path
tty: serial: pch_uart: add check for dma_alloc_coherent()
serial: zs: Fix swapped RI/DSR modem line transition counting
Alexis Bouzigues [Fri, 29 May 2026 14:28:14 +0000 (09:28 -0500)]
i2c: virtio: mark device ready before registering the adapter
virtio_i2c_probe() synchronously probes child i2c drivers on the bus,
but peripherals may use the bus at probe for tasks like reading a chip
id. The vhost-user-i2c backend stalls at such probes unless DRIVER_OK
is already set before the virtqueue is first kicked.
Set DRIVER_OK explicitly before i2c_add_adapter(), as done for the
same reason in commit f5866db64f34 ("virtio_console: enable VQs
early") and commit 71e4b8bf0482 ("virtio_rpmsg: set DRIVER_OK before
using device").
Signed-off-by: Alexis Bouzigues <BouziguesAlexis@JohnDeere.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Linus Torvalds [Sat, 30 May 2026 04:50:56 +0000 (21:50 -0700)]
Merge tag 'v7.1-rc6-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- security fix for FSCTL_SET_SPARSE
- fix leak in ksmbd_query_inode_status()
- fix OOB read in smb_check_perm_dacl()
* tag 'v7.1-rc6-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE
ksmbd: release ksmbd_inode ref via ksmbd_inode_put on lookup paths
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Linus Torvalds [Sat, 30 May 2026 02:08:20 +0000 (19:08 -0700)]
Merge tag 'drm-fixes-2026-05-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular pull, doesn't seem too insane or AI owned, couple of UAF fixes
and another repair for an earlier fix, mostly amdgpu and i915 display
with xe/i915 accel, and misc core/driver fixes.
It might be a bit bigger than usual at this stage, but I'm not seeing
anything too scary here.
dumb-buffer:
- prevent overflows in dumb-buffer creation
dma-buf:
- fix UAF in dma_buf_fd() tracepoint
gem:
- fix for the fix for the fix for the change handle ioctl
i915:
- Fix potential UAF in TTM object purge
- Use polling when irqs are unavailable
- Fix HDR pre-CSC LUT programming loop
- Block DC states on vblank enable when Panel Replay supported
- Use DC_OFF wake reference to block DC6 on vblank enable
* tag 'drm-fixes-2026-05-30' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/gem: fix race between change_handle and handle_delete
drm: prevent integer overflows in dumb buffer creation helpers
dma-buf: fix UAF in dma_buf_fd() tracepoint
drm/amdgpu: fix calling VM invalidation in amdgpu_hmm_invalidate_gfx
drm/amdgpu: fix amdgpu_hmm_range_get_pages
drm/amdgpu/userq: use array instead of list for userq_vas
drm/amdgpu/userq: move mqd_destroy to later stage to keep core obj valid
drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger
drm/amdgpu/userq: remove amdgpu_userq_create/destroy_object wrapper
drm/amd/pm/si: Disregard vblank time when no displays are connected
drm/amdkfd: Check for pdd drm file first in CRIU restore path
drm/amdgpu: fix potential overflow in fs_info.debugfs_name
drm/amdgpu/userq: make sure queue is valid in the hang_detect_work
drm/amdgpu/userq: reserve root bo without interruption
drm/amdgpu/userq: add amdgpu_bo_unpin when amdgpu_ttm_alloc_gart fails
drm/amdgpu: simplify return value in amdgpu_userq_get_doorbell_index
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
drm/amd/display: Write REFCLK to 48MHz on DCN21
drm/amdgpu/userq: Fix the mutex_init cleanup for fence_drv_lock
drm/amdgpu/userq: Fix doorbell object cleanup of queue
...
Linus Torvalds [Sat, 30 May 2026 01:07:37 +0000 (18:07 -0700)]
Merge tag 'spi-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One substantive fix here, fixing corruption of the maximum frequency
for spi-mem operations which caused users to remember what should have
been a temporarily modified maximum frequency as the standard going
forward, potentially causing instability when the modification raised
rather than lowered the frequency.
We also have a trivial patch which just documents the correct way to
describe the Qualcomm IPQ5210 SNAND controller in the DT, there are no
code changes"
* tag 'spi-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-mem: avoid mutating op template in spi_mem_supports_op()
spi: dt-bindings: spi-qpic-snand: Add ipq5210 compatible
Linus Torvalds [Fri, 29 May 2026 23:39:56 +0000 (16:39 -0700)]
Merge tag 'regmap-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Some other fixing in an API user turned up the fact that we weren't
correctly applying cache only mode to volatile registers in
regmap_update_bits(), causing us to try to access hardware that was
powered off or otherwise not in a state to accept I/O. This fix
returns an error instead, avoiding more serious consequences"
* tag 'regmap-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: reject volatile update_bits() in cache-only mode
Linus Torvalds [Fri, 29 May 2026 22:46:40 +0000 (15:46 -0700)]
Merge tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Quick follow up, nothing super urgent here. Main reason I'm sending
this out is because the IPsec and Bluetooth PRs did not make it
yesterday. I don't want to have to send you all of this + whatever
comes next week, for rc7. The fixes under "Previous releases -
regressions" are for real user-reported regressions from v7.0.
Previous releases - regressions:
- Revert "ipv6: preserve insertion order for same-scope addresses"
- xfrm: move policy_bydst RCU sync, a fix which added a sync RCU on
netns exit got backported to stable and was causing serious
accumulation of dying netns's for real workloads
- pcs-mtk-lynxi: fix bpi-r3 serdes configuration
Previous releases - always broken:
- usual grab bag of race, locking and leak fixes for Bluetooth
- handful of page handling fixes for IPsec"
* tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
wireguard: send: append trailer after expanding head
Revert "ipv6: preserve insertion order for same-scope addresses"
net: skbuff: fix pskb_carve leaking zcopy pages
ipv6: fix possible infinite loop in fib6_select_path()
ipv6: fix possible infinite loop in rt6_fill_node()
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
vsock/virtio: bind uarg before filling zerocopy skb
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
net: pcs: pcs-mtk-lynxi: fix bpi-r3 serdes configuration
sctp: fix race between sctp_wait_for_connect and peeloff
net: mana: Skip redundant detach on already-detached port
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
...
Linus Torvalds [Fri, 29 May 2026 22:17:53 +0000 (15:17 -0700)]
Merge tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux
Pull clang build fix from Nathan Chancellor:
"A small fix to disable -Wattribute-alias for clang in the few places
it is already disabled for GCC, now that tip of tree clang has
implemented -Wattribute-alias as GCC has"
* tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux:
Disable -Wattribute-alias for clang-23 and newer
Andrei Vagin [Tue, 26 May 2026 20:50:43 +0000 (20:50 +0000)]
Revert "x86/fpu: Refine and simplify the magic number check during signal return"
This reverts
dc8aa31a7ac2 ("x86/fpu: Refine and simplify the magic number check during signal return").
The aforementioned commit broke applications that construct signal frames in
userspace (such as CRIU and gVisor) if the frame's xstate size is smaller than
the kernel's fpstate->user_size.
Furthermore, this introduces a critical issue for checkpoint/restore tools
like CRIU. If a process is checkpointed while inside a signal handler, its
stack contains a signal frame formatted according to the source host's xstate
capabilities.
If that process is later restored on a destination host with larger xstate
capabilities (e.g., a newer CPU with more features enabled, resulting in
a larger fpstate->user_size), the kernel will look for FP_XSTATE_MAGIC2 at the
destination host's larger user_size offset instead of the offset encoded in
the frame's fx_sw->xstate_size.
This causes the magic2 check to fail, forcing sigreturn to silently fall back
to "FX-only" mode. Upon return from the signal handler, the process's extended
state is reset to initial values instead of being restored, leading to silent
data corruption.
The aforementioned commit cited
d877550eaf2d ("x86/fpu: Stop relying on userspace for info to fault in xsave buffer")
as justification to stop relying on userspace for the magic number check.
However, these two changes are fundamentally different. The last one only
changed how much memory the kernel ensures is paged-in before running XRSTOR
to prevent an infinite loop. It did not change the signal frame format or how
the layout is validated.
Reverting this change restores the use of fx_sw->xstate_size for
locating magic2 and restores the necessary sanity checks, ensuring that
the signal frame remains self-describing and portable.
[ bp: Massage commit message. ]
Fixes: dc8aa31a7ac2 ("x86/fpu: Refine and simplify the magic number check during signal return") Signed-off-by: Andrei Vagin <avagin@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Chang S. Bae <chang.seok.bae@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20260429000623.3356606-1-avagin@google.com
Zhenghang Xiao [Tue, 26 May 2026 08:53:13 +0000 (16:53 +0800)]
drm/gem: fix race between change_handle and handle_delete
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path.
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260526085313.26791-1-kipreyyy@gmail.com
Linus Torvalds [Fri, 29 May 2026 20:47:55 +0000 (13:47 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Restore CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC to its former glory by
making sure the config symbol is correctly spelled out in the code
- Don't reset the AArch32 view of the PMU counters to zero when the
guest is writing to them
- Fix an assorted collection of memory leaks in the newly added
tracing code
- Fix the capping of ZCR_EL2 which could be used in an unsanitised
way by an L2 guest
x86:
- Include the kernel's linux/mman.h in KVM selftests to ensure
MADV_COLLAPSE is defined, as older libc versions may not provide
it.
- Include execinfo.h if and only if KVM selftests are building
against glibc, and provide a test_dump_stack() for non-glibc
builds.
- Silence an annoying RCU splat on (even non-KVM-related) panics.
The splat is technically legit, but in practice not an issue. To
have a race, you would need to unload the KVM modules at exactly
the time a panic happens; and speaking of incredibly rare races,
taking the locks risks introducing a deadlock if the module unload
code took the lock on a CPU that has been halted. Which seems
possibly more likely than the RCU grace period issue, so just shut
it up. This code used to be in KVM but is now outside it; but the
x86 maintainers haven't picked it up, so here we are.
- Rate-limit global clock updates once again (but without delayed
work), as KVM was subtly relying on the old rate-limiting for NPT
correction to guard against "update storms" when running without a
master clock on systems with overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty"
instead of marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the
CPU TLB doesn't contain AVIC-tagged entries for the APIC base GPA.
- The top 10 commits fix buffer overflow (and potential TOC/TOU)
flaws in the page state change protocol for encrypted VMs. AI
models find it quite easily given it was reported three times, but
aren't as good at writing a comprehensive fix. There's more to
clean up in the area, which will come in 7.2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
KVM: SEV: Check PSC request indices against the actual size of the buffer
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
KVM: SEV: Ignore Port I/O requests of length '0'
KVM: SEV: Reject MMIO requests larger than 8 bytes with GHCB v2+
KVM: SEV: Ignore MMIO requests of length '0'
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
KVM: arm64: Fix memory leak in hyp_trace_unload()
KVM: arm64: Fix rollback in hyp_trace_buffer_share_hyp()
KVM: arm64: Fix meta-page unsharing in pKVM hyp tracing
KVM: arm64: PMU: Preserve AArch32 counter low bits
KVM: SVM: Flush the current TLB when transitioning from xAVIC => x2AVIC
KVM: x86: Fix ERAPS RAP clear on INVPCID single-context invalidation
KVM: arm64: Fix CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC
KVM: selftests: Guard execinfo.h inclusion for non-glibc builds
KVM: x86: Rate-limit global clock updates on vCPU load
...
wireguard: send: append trailer after expanding head
With how this is currently written, we add the trailer, zero it out, and
then add the header space on. If that header space requires a
reallocation + copy, the zeros in the trailer aren't copied, because the
skb len hasn't actually been yet expanded to cover that. Instead add the
padding at the end of the process rather than at the beginning.
Revert "ipv6: preserve insertion order for same-scope addresses"
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Pavel Begunkov [Thu, 28 May 2026 18:43:53 +0000 (19:43 +0100)]
net: skbuff: fix pskb_carve leaking zcopy pages
When SKBFL_MANAGED_FRAG_REFS is set, frag pages are not refcounted but
their lifetime is controlled by the attached ubuf_info. To make a copy
of the skb_shared_info, we either should clear the flag and reference
the frags, or keep the flag and have frags unreferenced.
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() don't
follow the rule and thus can leak page references. Let's clear
SKBFL_MANAGED_FRAG_REFS from the original skb to fix it. It's the
simplest way to address it, but there are more performant ways to do
that if it ever becomes a problem.
Jiayuan Chen [Wed, 27 May 2026 05:31:31 +0000 (13:31 +0800)]
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiayuan Chen [Wed, 27 May 2026 05:31:30 +0000 (13:31 +0800)]
ipv6: fix possible infinite loop in rt6_fill_node()
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yuqi Xu [Wed, 27 May 2026 03:48:15 +0000 (11:48 +0800)]
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry.
Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Yuqi Xu <xuyq21@lenovo.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/8b129d10566aa3eb43f61a8f9757bcf51707d324.1779636774.git.xuyq21@lenovo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jingguo Tan [Wed, 27 May 2026 02:33:01 +0000 (10:33 +0800)]
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Signed-off-by: Lin Ma <malin89@huawei.com> Signed-off-by: Rongzhen Cui <cuirongzhen@huawei.com> Signed-off-by: Jingguo Tan <tanjingguo@huawei.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260527023301.1075581-1-malin89@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
Use READ_ONCE() when reading entries/indices from the guest-accessible
Page State Change buffer to defend against TOCTOU bugs.
Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing
(and not consuming the result!), as the guest isn't supposed to touch the
buffer while it's being processed. I.e. using READ_ONCE() is all about
protecting against misbehaving guests.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-11-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Check PSC request indices against the actual size of the buffer
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
Stop explicitly passing the PSC buffer to snp_begin_psc(): it *must*
be the scratch area. This will allow fixing a variety of bugs without
further complicating the code.
No functional change intended.
Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
Now that all paths in KVM properly validate the length needed for the
scratch area, and are guaranteed to pass in a non-zero length, WARN if KVM
attempts to configured the scratch area with min_len==0 to guard against
future bugs.
Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
When handling a Page State Change (PSC) #VMGEXIT use the size of the PSC
header as the minimum size for the scratch area. Per the GHCB spec, PSC
requests do NOT provide the length, i.e. using control->exit_info_2 for the
length is completely made up behavior. The existing code "works", e.g.
even though Linux-as-a-guest always passes '0', because KVM doesn't do
anything with the length when the request is in the GHCB's shared buffer.
Use the header as the min length. Once the header is retrieved, KVM can
use the specified indices to compute the full size of the request.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0.
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly ignore MMIO requests of length '0', so that setting up the
software scratch area (and other code) doesn't have to worry about
underflowing the length, and to allow for special casing '0' in the
future.
Fixes: 8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michael Roth [Fri, 1 May 2026 20:22:26 +0000 (13:22 -0700)]
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
As per the GHCB spec, when using GHCB v2+ require the software scratch area
to reside in the GHCB's shared buffer. Note, things like Page State Change
(PSC) requests _rely_ on this behavior, as the guest can't provide a length
when making the request, i.e. the size of the guest payload is bounded by
the size of the shared buffer.
Failure to force usage of the GHCB, and a slew of other flaws, lets a
malicious SNP guest corrupt host kernel heap memory, and leak host heap
layout information.
setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2),
where exit_info_2 is guest-controlled. With exit_info_2=24, this yields
a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer
holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only
entries[0] and entries[1] are in-bounds.
snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253)
but NOT against the actual buffer size:
idx_end = hdr->end_entry;
if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer
snp_complete_psc(svm, ...);
return 1;
}
for (idx = idx_start; idx <= idx_end; idx++) {
entry_start = entries[idx]; // OOB when idx >= 2
The guest sets end_entry=10+, causing the host to iterate entries[2+]
which are OOB into adjacent slab objects. For each OOB entry:
- The host reads 8 bytes (OOB READ / info leak oracle)
- If the data passes PSC validation, __snp_complete_one_psc() writes
cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806)
- If validation fails, the error response reveals whether adjacent
memory is zero vs non-zero (information disclosure to guest)
The guest controls allocation size (exit_info_2), entry range
(cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly
hit different slab positions.
By exploiting the variety of bugs, a malicious SEV-SNP guest can:
- OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure)
- OOB write cur_page bits into adjacent objects (heap corruption)
- Trigger use-after-free conditions across VMGEXITs
E.g. with KASAN enabled, a single insmod of the PoC guest module
produces 73 KASAN reports:
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890
Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890
Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199
The buggy address belongs to the object at ffff888XXXXXXXXX
which belongs to the cache kmalloc-cg-32 of size 32
The buggy address is located N bytes to the right of
allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX)
Linus Torvalds [Fri, 29 May 2026 17:36:57 +0000 (10:36 -0700)]
Merge tag 'io_uring-7.1-20260529' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix for a regression introduced in this cycle, where
we should ensure the node is visible before the entry is added to
the tctx list"
* tag 'io_uring-7.1-20260529' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/tctx: set ->io_uring before publishing the tctx node
Paolo Bonzini [Fri, 29 May 2026 17:28:16 +0000 (19:28 +0200)]
Merge tag 'kvm-x86-fixes-7.1-rc6' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 7.1-rcN
- Include the kernel's linux/mman.h in KVM selftests to ensure MADV_COLLAPSE
is defined, as older libc versions may not provide it.
- Include execinfo.h if and only if KVM selftests are building against glibc,
and provide a test_dump_stack() for non-glibc builds.
- Fudge around an RCU splat in the emegerncy reboot code that is technically
a legitimate flaw, but in practice is a non-issue and fixing the flaw, e.g.
by adding locking, would incur meaningful risk, i.e. do more harm than good.
- Rate-limit global clock updates once again (but without delayed work), as
KVM was subtly relying on the old rate-limiting for NPT correction to guard
against "update storms" when running without a master clock on systems with
overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty" instead of
marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the CPU TLB
doesn't contain AVIC-tagged entries for the APIC base GPA.
Linus Torvalds [Fri, 29 May 2026 17:04:09 +0000 (10:04 -0700)]
Merge tag 'cxl-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- cxl/test: update mock dev array before calling platform_device_add()
* tag 'cxl-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Update mock dev array before calling platform_device_add()
* tag 'iommu-fixes-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add my employer to my entries
MAINTAINERS: Add Vasant Hegde to reviewers of AMD IOMMU
iommu, debugobjects: avoid gcc-16.1 section mismatch warnings
iommu/vt-d: Simplify calculate_psi_aligned_address()
Linus Torvalds [Fri, 29 May 2026 15:55:41 +0000 (08:55 -0700)]
Merge tag 'sound-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of recent small fixes and quirks.
We still see a bit more changes than wished, but most of them are
device-specific ones that are pretty safe to apply, while a core fix
is a typical UAF fix for PCM core that was recently caught by fuzzer;
so overall nothing looks really worrisome.
Core:
- Fix a UAF in PCM OSS proc interface
HD-audio:
- Fix memory leaks in CS35L56 driver
- Various device-specific quirks for Realtek and CS420x codecs
USB-audio:
- Quirk for TAE1160 USB Audio
- Fix for Scarlett2 Gen4 direct monitor gain
ASoC:
- Fixes for QCom q6asm-dai, Intel bytcht_es8316, and simple-mux codec
FireWire:
- Fix for Motu DSP event queue protection"
* tag 'sound-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: codecs: simple-mux: Fix enum control bounds check
ALSA: usb-audio: Add iface reset and delay quirk for TAE1160 USB Audio
ALSA: hda/cs420x: Add CS4208 fixup for iMac16,1
ALSA: hda/realtek: add quirk for HP Dragonfly Folio G3 2-in-1
ALSA: hda/realtek: Fix speaker output on ASUS ROG Strix G615LP
ASoC: qcom: q6asm-dai: use pointer type with kzalloc_obj()
ASoC: qcom: q6asm-dai: remove unnecessary braces
ASoC: qcom: q6asm-dai: fix error handling in prepare and set_params
ASoC: qcom: q6asm-dai: close stream only when running
ASoC: qcom: q6asm-dai: do not set stream state in event and trigger callbacks
ASoC: Intel: bytcht_es8316: Fix MCLK leak on init errors
ALSA: hda/realtek: Limit mic boost on Positivo DN140
ALSA: scarlett2: Fix 2i2 Gen 4 direct monitor gain on firmware 2417
ALSA: pcm: oss: Fix setup list UAF on proc write error
ALSA: hda: cs35l56: Fix system name string leaks
ALSA: hda/realtek: Add HDA_CODEC_QUIRK for Lenovo Yoga Slim 7 14AGP11
ALSA: hda/realtek: Fix incorrect comment for ALC299_FIXUP_PREDATOR_SPK
ALSA: firewire-motu: Protect register DSP event queue positions
Bard Liao [Fri, 29 May 2026 01:42:59 +0000 (09:42 +0800)]
ASoC: sdw_utils: return -EPROBE_DEFER if components are not registered yet
commit 42d99857d6f0 ("ASoC: core: Move all users to deferrable card binding")
converted the -EPROBE_DEFER return value of snd_soc_bind_card() to 0
which results in the machine driver probe return 0 and will not be
called again when any component is not yet registered.
We get the right component name from the registered components
and use it in the dai links. It will lead to bind fail if the default
component name is used. Return -EPROBE_DEFER to allow the machine driver
probe again after the components are registered.
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260529014259.2528048-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The change to format propagation in the BRx broke configuration of the
DRM pipeline. Revert it to fix the regression.
The original commit was meant to fix a v4l2-compliance failure, with no
known userspace applications being affected beside test tools. Reverting
is the simplest option, a more comprehensive fix can be developed (and
tested more thoroughly) later.
The change to format initialization, along with the change to format
propagation in the BRx in commit 937f3e6b51f1 ("media: renesas: vsp1:
brx: Fix format propagation"), broke configuration of the DRM pipeline.
Revert it to fix the regression.
The original commit was meant to fix a v4l2-compliance failure, with no
known userspace applications being affected beside test tools. Reverting
is the simplest option, a more comprehensive fix can be developed (and
tested more thoroughly) later.
Fixes: 133ac42af0a1 ("media: renesas: vsp1: Initialize format on all pads") Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/T2H Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20260506215650.1897177-2-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
projects / linux / log