Adrian Knoth [Fri, 16 Jan 2004 08:08:49 +0000 (00:08 -0800)]
[PATCH] USB: add Driver for Emagic A6-2 (formerly known as EMI 6|2m)
this patch which applies against Linux-2.6.0 (and also 2.6.1)
adds support for the Emagic A6-2 USB-Audio-Interface.
Note that the selection of either MIDI or SPDIF is actually done
by ifdefs in the driver, this behaviour should clearly be changed
to MODULE_PARAM in the future.
Rasmus Rohde [Fri, 16 Jan 2004 07:39:38 +0000 (23:39 -0800)]
[PATCH] USB: Missing patch for ftdi_sio.c
On Sat, 2004-01-10 at 05:07, Greg KH wrote:
> On Thu, Dec 18, 2003 at 10:28:24PM +0100, Rasmus Rohde wrote:
> > I wrote to you earlier about a missing patch to ftdi_sio.c that appeared
> > in
> >
> > http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.5/usb-ftdi_sio-2.5.68.patch
> >
> > It has to do with the introduction tiocmset and tiocmget.
> > This patch was dropped in
> >
> > http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.5/usb-ftdi_sio-2.5.75.patch
> >
> > which unfortunately breaks the driver.
>
> Hm, sorry about that. Care to send me a patch to fix it up?
Alan Stern [Fri, 16 Jan 2004 07:28:56 +0000 (23:28 -0800)]
[PATCH] USB Storage: unusual_devs.h update
On Wed, 14 Jan 2004, Marcin Juszkiewicz wrote:
> After running "MS Import" on my Sony Clie SJ30 palmtop I got:
>
> hub 3-0:1.0: new USB device on port 2, assigned address 6
> usb-storage: This device (054c,006d,0100 S 05 P 00) has unneeded SubClass and Protocol entries in unusual_devs.h
> Please send a copy of this message to <linux-usb-devel@lists.sourceforge.net>
Thanks for sending this. The updated information will appear in an
upcoming kernel.
Alan Stern [Fri, 16 Jan 2004 07:28:05 +0000 (23:28 -0800)]
[PATCH] USB Storage: another unusual_devs entry
On Fri, 2 Jan 2004, Eric Lussard wrote:
> <5>usb-storage: This device (05e3,0701,0002 S 02 P 50) has an unneeded
> Protocol entry
> in unusual_devs.h
> <4> Please send a copy of this message to
> <linux-usb-devel@lists.sourceforge.net>
Yet another unusual_devs change! I really should stick to a policy of
reading through all the new email before sending any replies...
Alan Stern [Fri, 16 Jan 2004 07:27:26 +0000 (23:27 -0800)]
[PATCH] USB Storage: another unneeded unusual_devs entry
On Fri, 2 Jan 2004, Oliver Neukum wrote:
> Hi Alan,
>
> you seem to like them. Here it is:
>
> usb-storage 3-1:1.0: usb_probe_interface
> usb-storage 3-1:1.0: usb_probe_interface - got id
> usb-storage: This device (0686,4014,0001 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h
> Please send a copy of this message to <linux-usb-devel@lists.sourceforge.net>
> scsi1 : SCSI emulation for USB Mass Storage devices
> Vendor: MINOLTA Model: DIMAGE CAMERA Rev: 1.00
> Type: Direct-Access ANSI SCSI revision: 02
Thanks Oliver. Interestingly, it looks as though the unneeded SubClass
and Protocol values were the only reason for keeping this entry, so now it
can be deleted in both 2.4 and 2.6.
Alan Stern [Fri, 16 Jan 2004 07:26:54 +0000 (23:26 -0800)]
[PATCH] USB storage: unusual_devs.h change
On Tue, 23 Dec 2003, sledgedog wrote:
> USB Mass Storage support registered.
> hub 3-0:1.0: new USB device on port 2, assigned address 2
> usb-storage: This device (090c,1132,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h
> Please send a copy of this message to <linux-usb-devel@lists.sourceforge.net>
Thank you for sending this in.
Greg, here is the patch for unusual_devs.h, both 2.4 and 2.6.
Ross Boswell [Fri, 16 Jan 2004 07:24:13 +0000 (23:24 -0800)]
[PATCH] USB Storage: patch to unusual_devs.h for Pentax Optio 330GS camera
I was unable to get my Pentax Optio 330GSrecognised
by the 2.6.0 kernel until I applied the patch below that I found
posted some months ago on the German Debian mailing list.
David Brownell [Tue, 6 Jan 2004 06:19:09 +0000 (22:19 -0800)]
[PATCH] USB: add goku_udc driver (Toshiba TC86C001 USB device)
This patch implements the "USB Gadget" API using the
"Goku-S" (TC86C001) full speed usb device controller.
It's passed testing with Gadget Zero, g_ether (full
CDC Ethernet support), gadgetfs, and most interestingly
Alan Stern's "File Storage Gadget" (FSG, talking to
Linux or Windows as a usb-storage device) to give the
halt processing a good workout. Control-OUT works.
Tested mostly on x86, with reported success on MIPS.
As well as being directly useful with that hardware,
I think this is small and simple enough to be useful
as an example of how to write a USB controller driver.
(There will be many more controller drivers than gadget
drivers, I suspect ...)
Please merge this to the next 2.6 release that takes
new drivers. Corresponding updates for kbuild and the
various gadget drivers will be coming (not in a flood).
Fix for oops on rmmod caused by *_remove() function marked as __devinit
(and thus discarded after module initialization - if CONFIG_MODULES=y
and CONFIG_HOTPLUG is not set).
This patch changes __devinit to __devexit and adds __devexit_p() where
pointer to such function is used.
The only exception is au1000, where au1000_remove() is called from
cleanup_au1000() function - __devinit is jest removed there.
Russell King [Sun, 4 Jan 2004 17:29:23 +0000 (17:29 +0000)]
[ARM] Fix cachepolicy=<foo>
On ARM, it is possible to configure the desired cache policy in
the page tables. Unfortunately, we haven't been updating the
protection_map nor PAGE_KERNEL, so this option doesn't change
the behaviour of the majority of mappings. This cset corrects
this oversight.
Amit Gurdasani [Sun, 4 Jan 2004 16:28:39 +0000 (16:28 +0000)]
[SERIAL] EISA ID for PnP modem
Patch from: Amit Gurdasani
I have a PROLiNK 1456VH internal Rockwell-based ISA PnP K56flex fax modem
whose EISA ID seems not to be known to 8250_pnp.c. The ID is AEI0250 as
reported in /sys/devices/pnp1/01:01/01:01.00/id and adding this into the
pnp_dev_table[] allows the device to be found and enabled properly by the
8250 serial driver.
Linus Torvalds [Sat, 3 Jan 2004 10:25:13 +0000 (02:25 -0800)]
Fix IDE "PIO WRITE wait for ready" test under extreme interrupt load.
From Daniel Tram Lux: under extreme irq load on an underpowered CPU,
the timeout loop may not make any progress, and decide that a timeout
occurred before it has actually tested the status register.
The minimal fix for now is to just have a final test _after_ the timeout
to remove the problem. The real fix would likely be to not have irqs
enabled between reading the status and the timeout.
Russell King [Fri, 2 Jan 2004 19:36:52 +0000 (19:36 +0000)]
[SERIAL] Remove old RSA resource handlign.
The resource handling left in autoconfig() is plainly wrong, since
we've already claimed the necessary resources prior to calling
autoconfig(). Therefore, we remove the superfluous code from
autoconfig().
Andi Kleen [Thu, 1 Jan 2004 03:41:03 +0000 (19:41 -0800)]
[PATCH] X86-64 merge
At least one of them is critical. It fixes an path in the IOMMU that
I broke with the ealier "fullflush" workaround.
- Check for ~/bin/installkernel like i386 (M. Bligh)
- Implement 32bit RTC_IRQ_SET correctly (Lutz Vieweg)
- Disable some useless printks in 32bit emulation
- Warning fixes for mixed C99 style declarations/statements.
- Sync lAPIC power management with i386
- Use topology sysfs like i386
- Fix some serious bugs in the MCE handler. ECC should
be decoded correctly now.
- Add oops=panic option to panic on Oopses.
- Fix hackish code in head.S
- Add missing options in IOMMU
- Fix _syscall6 (Olaf Hering)
- Remove broken ACPI locking code. Port IA64 C version.
- Make safe_smp_processor_id() more reliable
- Read HPET in vsyscall code
- Add workaround for BIOS that corrupt 64bit registers in HLT
- Fix unaligned access in bitops.h
- Remove broken ntp drift correction code for now
- i386 merge in SCI setup
- Fix wrong offset in callin.h (Jim Houston)
- Minor comment fixes
Michael Hunold [Thu, 1 Jan 2004 03:25:24 +0000 (19:25 -0800)]
[PATCH] DVB: Revamp of the TTUSB-DEC driver
- Alter hotplug firmware naming to fit in with dvb standard.
- Use the hotplug firmware loader for 2.6 kernels instead of compiling
the firmware into the module.
- Integrate frontend into ttusb_dec module and remove pseudo-i2c bits,
move ttusb_dec header into source file.
- Rudimentary section filter support (enough for scan).
Michael Hunold [Thu, 1 Jan 2004 03:25:04 +0000 (19:25 -0800)]
[PATCH] DVB: Fixes for frontend drivers
- ves1820: increase mdelay from 30 to 50 to be more reliable with bad
reception quality (Andreas Oberritter)
- dst: remove AUTO_INVERSION for capabilities, allow params
dst_type_flags and dst_type to have multiple values for multiple
cards in one machine (Jamie Honan)
David Mosberger [Wed, 31 Dec 2003 15:18:59 +0000 (07:18 -0800)]
ia64: Allow system-call number to be changed during system-call tracing
(both for native and x86 system call tracing). This is needed
by recent versions of strace and UML likes to do that, too.
David Mosberger [Tue, 30 Dec 2003 17:10:09 +0000 (09:10 -0800)]
ia64: Fix a ptrace-bug that caused "strace -f" to crash the inferior
process. The root-cause of the problem was that ptrace() tried
to copy the portion of the register backing store that landed on
the kernel stack back to users-space, but the resulting state
was inconsistent if the inferior process was in the middle of a
system-call (as would always be the case for strace).
The solution is to avoid all needless copying and to instead
ensure that when accessing a memory location that may belong to
a thread's register-backing store, we attach to that particular
thread, rather than the thread identified by the PID argument.
If the thread happens to be unattachable, we fall back to using
the thread identified by the PID argument. This should have the
desired effect if the thread has terminated already and if the
thread is running while ptrace() is trying to access its state,
all bets are off anyhow and there are no coherency guarantees.
In other words, this should be doing the right thing under all
circumstances.
The patch also fixes the case where PT_AR_BSP and/or PT_CFM are
written while the inferior process is in the middle of a system
call. This makes arguments passed to GDB inferior calls come
out right.
The patch was tested with strace -f and the GDB testsuite, which
showed no regressions compared to the previous version of the
kernel.
Andrew Morton [Tue, 30 Dec 2003 09:00:38 +0000 (01:00 -0800)]
[PATCH] call_usermodehelper retval fix
The reworked firmware loader in the DVB patches needs the fix to the
call_usermodehelper() return value.
From: Rusty Russell <rusty@rustcorp.com.au>
MODULE_ALIAS_BLOCK() and MODULE_ALIAS_CHAR() define aliases of form
"XXX-<major>-<minor>", so we should probe for modules using this form.
Unfortunately in 2.4, block aliases were "XXX-<major>" and char aliases
were of both forms.
Ideally, all modules would now be using MODULE_ALIAS() macros to define
their aliases, and the old configuration files wouldn't matter as much.
Unfortunately, this hasn't happened, so we make request_module() return the
exit status of modprobe, and then do fallback when probing for char and
block devices.
(Kudos to Chris Wright, I stole his kernel_thread flags).
Andrew Morton [Tue, 30 Dec 2003 09:00:07 +0000 (01:00 -0800)]
[PATCH] fix for 16-bit PCMCIA interrupt selection
From: David Hinds <dhinds@sonic.net>
This fixes interrupt allocation for 16-bit PCMCIA cards, so that on systems
supporting ISA bus interrupts, if all ISA interrupts are unavailable, we'll
fall back on sharing the bridge PCI interrupt.
Andrew Morton [Tue, 30 Dec 2003 08:59:37 +0000 (00:59 -0800)]
[PATCH] dhinds is not 2.6 PCMCIA maintainer
From: David Hinds <dhinds@sonic.net>
I have not been actively maintaining PCMCIA for 2.6; I tried asking the
more active developers to see if someone would step into the job but they
were not willing to do so at this time. I'll still submit patches from
time to time.
(David has a ./CREDITS entry, of course).
We should really put in Russell King here, but I'll let him do that
himself.
Andrew Morton [Tue, 30 Dec 2003 08:59:27 +0000 (00:59 -0800)]
[PATCH] PPC32: Fix the mkprep util to work correctly on Solaris 8
From: Tom Rini <trini@kernel.crashing.org>
Peter Wahl <PeterWahl@web.de>
PPC32: Fix the mkprep util to work correctly on Solaris 8.
- There is a very odd problem with the alignment of dword_t values
which causes this program to not work correctly when compiled on
Solaris 8. The workaround is not use a pointer and to memcpy the
values instead.
projects / linux / log