Alex Deucher [Thu, 7 May 2026 16:11:29 +0000 (12:11 -0400)]
drm/amdkfd: rework MES queue reset sequence
Call MES with detect only to get the list of hung queues rather
than detecting an resetting. Then loop over the bad queues
and reset them individually and finally remove them. Skip
queues not owned by KFD.
v2: always call resume_all after queue reset
Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Mon, 20 Apr 2026 14:45:50 +0000 (10:45 -0400)]
drm/amd/amdgpu/include : update mes api header v11/v12
Update the parameter in SET_HW_RESOURCES API 1. Align with the setting
of enable_lr_compute_wa 2. Add enable_compute_pipe_reset to enable
pipe reset when compute queue reset failes
v2: add driver flags to track when we enable it
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com> Reviewed-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/gfx12: Refactor compute pipe reset and add HQD cleanup
Refactor gfx_v12_0_reset_compute_pipe() to accept explicit me, pipe, and
queue parameters instead of deriving them from the ring structure. This
enables the function to be used in generic pipe reset flows.
Introduce gfx_v12_0_clear_hqds_on_mec_pipe() to properly clear
CP_HQD_ACTIVE and CP_HQD_DEQUEUE_REQUEST for all queues on a given MEC
pipe while the pipe reset is asserted, ensuring the HQDs are torn down
correctly before deasserting reset.
Switch the KCQ reset path to use the common MEC pipe reset helper
amdgpu_gfx_mec_pipe_reset_run(), which coordinates the reset sequence
including KFD suspend/resume to avoid conflicts with user mode queues.
v2: just update the sequence (Alex)
v3: directly clear ACTIVE and DEQUEUE_REQUEST (Shaoyun Liu)
Suggested-by: Manu Rastogi <manu.rastogi@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/gfx11: Refactor compute pipe reset and add HQD cleanup
Refactor gfx_v11_0_reset_compute_pipe() to accept explicit me, pipe, and
queue parameters instead of deriving them from the ring structure. This
enables the function to be used in generic pipe reset flows.
Introduce gfx_v11_0_clear_hqds_on_mec_pipe() to properly clear
CP_HQD_ACTIVE and CP_HQD_DEQUEUE_REQUEST for all queues on a given MEC
pipe while the pipe reset is asserted, ensuring the HQDs are torn down
correctly before deasserting reset.
Switch the KCQ reset path to use the common MEC pipe reset helper
amdgpu_gfx_mec_pipe_reset_run(), which coordinates the reset sequence
including KFD suspend/resume to avoid conflicts with user mode queues.
v2: just update the sequence (Alex)
v3: directly clear ACTIVE and DEQUEUE_REQUEST (Shaoyun Liu)
Suggested-by: Manu Rastogi <manu.rastogi@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse Zhang [Mon, 30 Mar 2026 01:33:28 +0000 (09:33 +0800)]
drm/amdgpu/mes_v12_1: use mes schedule pipe for legacy queues on unified MES
when suspend_all_gangs is issued to pipe0 MES during system suspend or runtime PM, pipe0 can only suspend and resume queues it has tracked.
KCQs registered with a non-zero pipe slot may not be correctly handled, leaving them in an inconsistent state after resume.
v3: fix the schedule pipe issue
Suggested-by: Michael Chen <michael.chen@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse Zhang [Mon, 30 Mar 2026 01:33:27 +0000 (09:33 +0800)]
drm/amdgpu/mes_v12_0: use mes schedule pipe for legacy queues on unified MES
when suspend_all_gangs is issued to pipe0 MES during system suspend or runtime PM, pipe0 can only suspend and resume queues it has tracked.
KCQs registered with a non-zero pipe slot may not be correctly handled, leaving them in an inconsistent state after resume.
v3: fix the schedule pipe issue
v4: use schedule pipe for KQ resets
Reviewed-by: Michael Chen <michael.chen@amd.com> Suggested-by: Michael Chen <michael.chen@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 15 May 2026 14:16:51 +0000 (10:16 -0400)]
drm/amdgpu: track guilty fence for queue reset
If we've already seen a fence, don't backup the
ring contents since presumably either the previous reset
was not successful or there was something wrong with the
data.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 15 May 2026 13:56:07 +0000 (09:56 -0400)]
drm/amdgpu: don't reemit if there is nothing to reemit
Return early in amdgpu_ring_set_fence_errors_and_reemit()
if ring_backup_entries_to_copy is 0. That means that either
the ring is idle and there is nothing to reemit, or there
some reason why we should reemit, so return early and
signal the fences (if applicable).
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 12 Jun 2026 21:58:44 +0000 (07:58 +1000)]
Merge tag 'drm-misc-next-fixes-2026-06-11' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v7.2:
- Fix agp_amd64_probe error propagation.
- Require carveout when PASID is not enabled amdxdna.
- Clear variable to prevent second unbind in amdxdna.
- Add separate Kconfig option for DMABUF_HEAPS_SYSTEM_CC_SHARED.
Arnd Bergmann [Wed, 10 Jun 2026 14:23:29 +0000 (19:53 +0530)]
dma-buf: move system_cc_shared heap under separate Kconfig
While system heap and system_cc_shared heap share a lot of code
and hence the same source file, their users have different needs.
system heap users need it to be a loadable module, while
system_cc_shared heap users don't.
Building as a loadable module breaks system_cc_shared heap on
powerpc and s390 due to un-exported set_memory_encrypted /
set_memory_decrypted functions.
Fix these by reorganising code to put the system_cc_shared heap
under a new Kconfig symbol, which allows either building both
into the kernel, or leave encryption up to the consumers of the
system heap.
Fixes: fd55edff8a0a ("dma-buf: heaps: system: Turn the heap into a module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: updated DMABUF_HEAPS_CC_SYSTEM to DMABUF_HEAPS_SYSTEM_CC_SHARED] Reviewed-by: T.J. Mercier <tjmercier@google.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20260610142329.3836808-1-sumit.semwal@linaro.org
Lizhi Hou [Thu, 4 Jun 2026 20:28:15 +0000 (13:28 -0700)]
accel/amdxdna: Clear sva pointer after unbind
Add client->sva = NULL after the unbind makes it consistent with how
amdxdna_sva_fini() already clears the pointer after unbinding. The
IS_ERR_OR_NULL guard in sva_fini will then correctly skip the second
unbind.
Dave Airlie [Tue, 9 Jun 2026 05:00:01 +0000 (15:00 +1000)]
Merge tag 'drm-misc-next-fixes-2026-06-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v7.2-rc1:
- Revert last minute IS_ERR_OR_NULL changes in nouveau/gsp.
- Fix build warning in drm scheduler.
- Flush caches and TLB before v3d runtime suspend.
- Fix a trace and debug command in amdxdna.
- Fix heap buffer address validation when PASID is disabled in amdxdna.
Mingyu Wang [Mon, 4 May 2026 07:48:23 +0000 (15:48 +0800)]
agp/amd64: Fix broken error propagation in agp_amd64_probe()
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.
Fixes: a32073bffc65 ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code") Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v2.6.18+ Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com
Lizhi Hou [Thu, 4 Jun 2026 19:54:59 +0000 (12:54 -0700)]
accel/amdxdna: Require carveout when PASID and force_iova are disabled
When both PASID and force_iova are disabled, carveout memory should be
used. Reject buffer allocations that cannot use carveout memory in this
configuration and return an error.
Dave Airlie [Thu, 4 Jun 2026 23:09:38 +0000 (09:09 +1000)]
Merge tag 'drm-rust-next-2026-06-04' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.2-rc1
- Driver Core (shared via signed tag dd-lifetimes-7.2-rc1):
- Introduce Higher-Ranked Lifetime Types (HRT) for Rust device
drivers, allowing driver structs to hold device resources like
pci::Bar and IoMem directly with a lifetime tied to the binding
scope, removing the need for Devres indirection and ARef<Device>.
- Replace drvdata() with scoped registration data on the auxiliary
bus, using the new ForLt trait to thread lifetimes through
registrations. Remove drvdata() and driver_type.
- DRM:
- Add GPUVM immediate mode abstraction for Rust GPU drivers:
- In immediate mode, GPU virtual address space state is updated
during job execution (in the DMA fence signalling critical path),
keeping the GPUVM and the GPU's address space always in sync.
- Provide GpuVm, GpuVa, and GpuVmBo types for managing address
spaces, virtual mappings, and GEM object backing respectively.
- Provide split-merge map/unmap operations that handle partial
overlaps with existing mappings.
- drm_exec integration for dma_resv locking and GEM object
validation based on the external/evicted object lists are not
yet covered and planned as follow-up work.
- Introduce DeviceContext type state for drm::Device, allowing
drivers to restrict operations to contexts where the device is
guaranteed to be registered (or not yet registered) with userspace.
- Add FEAT_RENDER flag to the Driver trait for render node support.
- Nova:
- Hopper/Blackwell enablement:
- Add GPU identification and architecture-based HAL selection for
Hopper (GH100) and Blackwell (GB100, GB202).
- Implement the FSP (Foundation Security Processor) boot path used by
Hopper and Blackwell, including FSP falcon engine support, EMEM
operations, MCTP/NVDM message infrastructure, and FSP Chain of
Trust boot with GSP lockdown release.
- Add support for 32-bit firmware images and auto-detection of
firmware image format.
- GSP boot and unload:
- Refactor the GSP boot process into a chipset-specific HAL,
keeping the SEC2 and FSP boot paths separated cleanly.
- Implement proper driver unload: send UNLOADING_GUEST_DRIVER
command, run Booter Unloader and FWSEC-SB upon unbinding, and run
the unload bundle on Gsp::boot() failure. This removes the need
for a manual GPU reset between driver unbind and re-probe.
- GA100 support:
- Add support for the GA100 GPU, including IFR header detection and
skipping, correct fwsignature selection, conditional FRTS boot,
and documentation of the IFR header layout.
- VBIOS hardening and refactoring:
- Harden VBIOS parsing with checked arithmetic, bounds-checked
accesses, and FromBytes-based structure reads throughout the FWSEC
and Falcon data paths. Simplify the overall VBIOS module
structure.
- HRT adoption:
- Use lifetime-parameterized pci::Bar directly, replacing the
Arc<Devres<Bar0>> indirection. Replace ARef<Device> with &'bound
Device in SysmemFlush and the GSP sequencer. Separate the driver
type from driver data.
- Misc:
- Rename module names to kebab-case (nova-drm, nova-core).
- Require little-endian in Kconfig, making the existing assumption
explicit.
- Tyr:
- Define comprehensive typed register blocks for GPU_CONTROL,
JOB_CONTROL, MMU_CONTROL (including per-address-space registers),
and DOORBELL_BLOCK using the kernel register!() macro. This replaces
manual bit manipulation with typed register and field accessors.
- Add shmem-backed GEM objects and set DMA mask based on GPU physical
address width.
- Adopt HRT: separate driver type from driver data, and use IoMem
directly instead of Devres for register access during probe.
Alex Deucher [Wed, 6 May 2026 20:50:42 +0000 (16:50 -0400)]
drm/amdkfd: always resume_all after suspend_all
Need to restore any good queues even if the suspend_all
failed for some. Always run remove_queue as that will
schedule a GPU reset is removing the queue fails.
v2: move resume_all after remove
Fixes: eb067d65c33e ("drm/amdkfd: Update BadOpcode Interrupt handling with MES") Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yunxiang Li [Wed, 27 May 2026 22:05:37 +0000 (18:05 -0400)]
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
priv_reg / priv_inst / bad_op and (on v11+) userq EOP IRQs are
acquired in late_init but released in hw_fini. This split forced
gfx_v9_0_hw_fini() to defensively guard each put with
amdgpu_irq_enabled() because hw_fini runs on paths that may not
reach late_init.
amdgpu_ip_block_hw_fini() only runs after hw_init returns success,
and suspend / resume cycle the refs through the same path, so
hw_init / hw_fini pair without any extra tracking. Move the gets
there and drop the guards.
While here, fix the pre-existing partial-failure leak in
set_userq_eop_interrupts() (gfx11 / 12_0 / 12_1). amdgpu_irq_get()
increments the refcount before calling .set, so a failure partway
through the loop leaves earlier successful gets stranded. Track
the loop position and roll back on the enable path.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Mon, 18 May 2026 15:48:09 +0000 (17:48 +0200)]
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
When the do_mccs parameter is false, we don't call
dm_helpers_read_mccs_caps, so sink->mccs_caps.freesync_supported is
unlikely to be true.
Fixes: 6f71d5dd3206 ("drm/amd/display: Read sink freesync support via mccs")
Bug: https://gitlab.freedesktop.org/drm/amd/-/work_items/5286 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Tue, 19 May 2026 13:00:03 +0000 (18:30 +0530)]
drm/amd/pm: Use strscpy in profile mode parsing
Use strscpy to copy the buffer which makes it explicit that a valid NULL
terminated string gets copied. Also, make it explicit that the source
buffer can be copied safely to the temporary buffer by checking against
its size.
Yongqiang Sun [Mon, 1 Jun 2026 19:28:30 +0000 (15:28 -0400)]
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
Malformed ACPI CRAT tables can advertise a zero or undersized subtype
length. The parser then fails to advance the cursor and loops forever
while the remaining image still looks large enough for a generic header.
Validate sub_type_hdr->length on each iteration before parsing or
advancing. Return -EINVAL and warn when length is zero or smaller than
the generic subtype header.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Mon, 1 Jun 2026 19:48:44 +0000 (15:48 -0400)]
drm/amdkfd: fix sysfs topology prop length on buffer truncation
sysfs_show_gen_prop() accumulated snprintf()'s return value into the
offset. snprintf() reports bytes that would have been written, not
bytes actually written, so a truncated sysfs show could over-report
its length. Use sysfs_emit_at(), which returns only the bytes written.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Honglei Huang [Fri, 29 May 2026 02:23:17 +0000 (10:23 +0800)]
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
Since commit c08972f55594 ("drm/amdgpu: fix amdgpu_hmm_range_get_pages")
moved mmu_interval_read_begin() out of the per-chunk loop, the
captured notifier_seq is no longer refreshed across retries. As a
result, the existing -EBUSY retry path can never make progress:
hmm_range_fault() returns -EBUSY only when
mmu_interval_check_retry(notifier, notifier_seq) reports that the
sequence is stale. Once the sequence has advanced, the stored seq
will never match again, so every subsequent call within the same
invocation returns -EBUSY immediately.
The "goto retry" therefore degenerates into a busy spin that simply
burns CPU for the full HMM_RANGE_DEFAULT_TIMEOUT (~1s) window before
finally bailing out with -EAGAIN. This is pure latency with no chance
of recovery, and it actively hurts the KFD userptr stack: the caller
ends up blocked for a second while holding mmap_lock, only to return
-EAGAIN to the restore worker (or to userspace) which would have
re-driven the operation immediately anyway.
Drop the retry/timeout entirely and let -EBUSY propagate straight to
out_free_pfns, where it is already translated to -EAGAIN. Recovery is
handled at a higher level: the KFD restore_userptr_worker reschedules
itself, and the userptr ioctl path returns -EAGAIN to userspace.
No functional regression: the previous behaviour on -EBUSY was already
to fail with -EAGAIN after a 1s stall; we just skip the stall.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Honglei Huang <honghuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Wed, 3 Jun 2026 07:11:33 +0000 (15:11 +0800)]
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
Stop appending OD sections in amdgpu_get_pp_od_clk_voltage()
once the sysfs page is full, instead of checking every sysfs_emit_at()
in SMU helpers. This is purely defensive hardening.
v2: Drop the prior series that checked sysfs_emit_at()
return values in every SMU *_emit_clk_levels() helper and
smu_cmn_print_*().(Kevin)
v3: Update description, remove all clamping
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Tue, 2 Jun 2026 13:59:44 +0000 (09:59 -0400)]
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
If kfd_dbg_trap_enable() fails while copying runtime_info to userspace,
it had already activated the trap, set debug_trap_enabled, taken an extra
process reference, and opened the debug event file. Return -EFAULT without
unwinding that state, leaving inconsistent trap state and a refcount
imbalance that could break later DISABLE/ENABLE.
On copy_to_user failure, deactivate the trap and undo the rest of the
enable setup before returning.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunil Khatri [Mon, 1 Jun 2026 14:45:34 +0000 (20:15 +0530)]
drm/amdgpu: validate the mes firmware version for gfx12.1
MES firmware should report the same version whether read from
the register or from the firmware ucode binary. This is not
always the case, so add a log when they mismatch.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunil Khatri [Mon, 1 Jun 2026 14:44:50 +0000 (20:14 +0530)]
drm/amdgpu: validate the mes firmware version for gfx12
MES firmware should report the same version whether read from
the register or from the firmware ucode binary. This is not
always the case, so add a log when they mismatch.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunil Khatri [Mon, 1 Jun 2026 14:41:17 +0000 (20:11 +0530)]
drm/amdgpu: compare MES firmware version ucode for gfx11
MES firmware should report the same version whether read from
the register or from the firmware ucode binary. This is not
always the case, so add a log when they mismatch.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunday Clement [Tue, 19 May 2026 14:02:30 +0000 (10:02 -0400)]
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
The kfd_wait_on_events ioctl passes a user-supplied num_events parameter
directly to alloc_event_waiters() which calls kcalloc() without validation.
This allows unprivileged users with /dev/kfd access to trigger large kernel
memory allocations, potentially causing memory exhaustion and denial of
service via the OOM killer.
Add a check to reject num_events values exceeding KFD_SIGNAL_EVENT_LIMIT
(4096), which is the maximum number of events a single process can create.
Christian König [Wed, 25 Feb 2026 14:12:02 +0000 (15:12 +0100)]
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
Make sure that we only submit work with full up to date VM page tables.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: use unsigned types for local pipe and REG_GET counters
Two small type fixes that match how the values are actually consumed:
- decide_zstate_support() iterates from 0 to pipe_count, which is
unsigned. Make the loop index unsigned int.
- hpo_enc401_read_state() reads HDMI_PIXEL_ENCODING and
HDMI_DEEP_COLOR_DEPTH via REG_GET_2(), which internally casts the
output pointer to (uint32_t *). Passing the address of an int is a
strict-aliasing wart even when the sizes match. Declare the locals
as uint32_t.
No behavioural change since the values are only compared against small
non-negative constants.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: widen dc_hdmi_frl_flags.force_frl_rate to unsigned int
dc_hdmi_frl_flags.force_frl_rate mirrors dc_debug_options.force_frl_rate,
which was just widened to unsigned int. Match the type here too so the
assignment in link_hdmi_frl.c does not narrow from unsigned to signed.
All call sites in link_hdmi_frl.c only compare the value against 0, 0xF,
or an hdmi_frl_link_rate enum whose values are non-negative, so the
change is behaviour-preserving and does not introduce sign-compare
warnings.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Rosca [Sat, 13 Sep 2025 14:51:02 +0000 (16:51 +0200)]
drm/amdgpu/userq: Fix reading timeline points in wait ioctl
Use correct u64 type.
Signed-off-by: David Rosca <david.rosca@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jeevana Muthyala [Thu, 14 May 2026 10:56:17 +0000 (16:26 +0530)]
drm/amdgpu/vcn5.0.0: enable secure submission on unified ring for VCN 5.3.0
Enable secure submission support on the unified ring for VCN IP version
5.3.0 by setting `secure_submission_supported = true` in
vcn_v5_0_0_unified_ring_vm_funcs.
Secure IB submission is supported on VCN 5.3.0 hardware/firmware,
allowing protected decode workloads to bypass the common IB gate.
Without this, secure playback submissions can be blocked and fail.
Other VCN 5.x variants using the same vcn_v5_0_0_ip_block
(e.g. IP_VERSION(5, 0, 0)) do not support secure submission
on the unified ring and therefore continue using non-secure paths.
This change only advertises existing hardware/firmware capability;
non-secure decode paths remain unaffected.
Signed-off-by: Jeevana Muthyala <Jeevana.Muthyala2@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 5 May 2026 13:40:04 +0000 (15:40 +0200)]
drm/amdgpu: deprecate guilty handling
The guilty handling tried to establish a second way of signaling problems with
the GPU back to userspace. This caused quite a bunch of issue we had to work
around, especially lifetime issues with the drm_sched_entity.
Just drop the handling altogether and use the dma_fence based approach instead.
v2: fix reversed condition in entity check (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaly Prosyak [Wed, 13 May 2026 20:08:30 +0000 (16:08 -0400)]
drm/amdgpu: Add lockdep annotations for lock ordering validation
Add lockdep annotations to teach lockdep the correct lock hierarchy
and catch ordering violations during development. This follows the
pattern established by dma-resv in drivers/dma-buf/dma-resv.c.
The implementation provides:
- Lock ordering training at module init (amdgpu_lockdep_init)
- Lock class association for real driver locks (amdgpu_lockdep_set_class)
Dummy locks are associated with the same class keys as real driver locks
via lockdep_set_class(), ensuring lockdep connects the training ordering
with actual runtime locks.
Testing:
Build the kernel with CONFIG_PROVE_LOCKING=y (enables CONFIG_LOCKDEP):
scripts/config --enable PROVE_LOCKING
scripts/config --enable DEBUG_LOCKDEP
make -j$(nproc)
On boot, dmesg should show:
AMDGPU: Lockdep annotations initialized (9 lock levels)
The companion IGT test (tests/amdgpu/amd_lockdep) exercises lock-heavy
GPU code paths concurrently to trigger lockdep warnings on violations:
sudo ./build/tests/amdgpu/amd_lockdep
sudo dmesg | grep -A 50 "circular locking dependency"
IGT subtests:
concurrent-reset-and-submit - reset_sem vs submission locks
concurrent-mmap-and-evict - mmap_lock vs vram_lock
concurrent-userptr-and-reset - notifier_lock vs reset_sem
stress-all-paths - all of the above simultaneously
A clean dmesg (no "circular locking dependency" or "possible recursive
locking detected" messages) confirms no lock ordering violations.
For CI integration, the test should be run on kernels compiled with
CONFIG_LOCKDEP=y; dmesg is scanned post-run for lockdep splats.
v2: (Christian)
- Move notifier_lock and vram_lock before reset locks in hierarchy.
HMM invalidation holds notifier_lock and can wait for GPU reset
completion, so notifier_lock must be outer to reset_domain->sem.
- Associate dummy locks with lock class keys via lockdep_set_class()
so lockdep connects training with real driver locks.
- Update commit message to list all 9 lock levels.
Requires CONFIG_PROVE_LOCKING=y to activate.
Cc: Christian Konig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Wed, 27 May 2026 13:50:47 +0000 (09:50 -0400)]
drm/amdkfd: fix SMI event cross-process information leak
kfd_smi_ev_enabled() skips the suser privilege check when pid=0.
PROCESS_START, PROCESS_END, and VMFAULT events are emitted with
pid=0 while carrying another process's PID and command name, so any
/dev/kfd user in the render group can monitor all GPU workloads.
Pass the target process PID into kfd_smi_event_add() for these events
so the existing per-client filter restricts delivery to the owning
process or CAP_SYS_ADMIN subscribers.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthew Stewart [Thu, 28 May 2026 22:21:54 +0000 (18:21 -0400)]
drm/amd/display: Add DCN42B to dml21_translation_helper
Needed for DML to function with DCN42B.
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthew Stewart [Wed, 27 May 2026 14:07:02 +0000 (10:07 -0400)]
drm/amd/display: Fix DCN42B version detection
In resource_parse_asic_id, the check for GC_11_0_4 was unbounded, which
caused it to override the detection of DCN42B.
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace BUG()/BUG_ON() with error logs and safe returns in several
places where they can be triggered by invalid userspace input,
preventing DoS via kernel panic.
Signed-off-by: Ce Sun <cesun102@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gary Guo [Tue, 2 Jun 2026 17:04:07 +0000 (18:04 +0100)]
gpu: nova-core: move lifetime to `Bar0`
Currently Nova code uses `&'a Bar0` a lot. This is `&'a Mmio`, where `Mmio`
represents an owned MMIO region; this type only exists as a target for
`Deref` so `Bar` and `IoMem` can share code and should be avoided to be
named directly. The upcoming I/O projection series would make `Io` trait
much simpler to implement, and thus the owned MMIO type would be removed
in favour of direct `Io` implementation on `Bar` and `IoMem`.
Add lifetime parameter to `Bar0<'a>` and change it to be alias of `&'a
pci::Bar<'a, ..>`. This also prepares Nova core so that when I/O projection
series land, this could be changed to using a MMIO view type directly which
avoids double indirection.
Signed-off-by: Gary Guo <gary@garyguo.net> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Eliot Courtney <ecourtney@nvidia.com> Link: https://patch.msgid.link/20260602170416.2268531-1-gary@kernel.org
[ Rebase onto latest drm-rust-next (Blackwell enablement). - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Lizhi Hou [Fri, 29 May 2026 15:28:37 +0000 (08:28 -0700)]
accel/amdxdna: Remove drv_cmd tracing from job free callback
aie2_sched_job_free() accesses job->drv_cmd for tracing purposes. However,
job->drv_cmd is owned by the caller and may already have been freed when
the job free callback runs, leading to a potential use-after-free.
Remove the job->drv_cmd access from aie2_sched_job_free().
Fixes: 8711eb2dde2e ("accel/amdxdna: Improve tracing for job lifecycle and mailbox RX worker") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260529152837.1973405-1-lizhi.hou@amd.com
Priya Hosur [Thu, 7 May 2026 08:01:37 +0000 (13:31 +0530)]
drm/amd/pm: smu_v14_0_0: use SoftMin for gfxclk in set_soft_freq_limited_range
In smu_v14_0_0_set_soft_freq_limited_range(), the gfxclk floor is
programmed via SetHardMinGfxClk together with SetSoftMaxGfxClk. Under
power_dpm_force_performance_level=high this pins HardMin to peak gfxclk.
In PMFW arbitration HardMin has higher priority than SoftMax, so the
firmware thermal/PPT throttler cannot clamp gfxclk via SoftMax once
HardMin is set to peak. Replace SetHardMinGfxClk with SetSoftMinGfxclk
so the driver still requests peak performance but the firmware
throttler retains the ability to clamp gfxclk under thermal/PPT
pressure. SoftMax handling is unchanged and no other clock domains
are affected.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Donet Tom [Wed, 27 May 2026 13:19:31 +0000 (18:49 +0530)]
drm/amdgpu: Fix incorrect VRAM GART mappings on non-4K page size systems
When mapping VRAM pages into the GART page table,
amdgpu_gart_map_vram_range() assumes that the system page size is the
same as the GPU page size.
On systems with non-4K page sizes, multiple GPU pages can exist within
a single CPU page. As a result, the mappings are created incorrectly
because fewer page table entries are programmed than required.
Fix this by programming the mappings correctly for non-4K page size
systems.
Fixes: 237d623ae659 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)") Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yunxiang Li [Wed, 27 May 2026 18:06:00 +0000 (14:06 -0400)]
drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yunxiang Li [Mon, 1 Jun 2026 19:15:06 +0000 (15:15 -0400)]
drm/amdgpu: set sub_block_index for mca ras sub-blocks
The mca ras sub-blocks (mp0, mp1, mpio) all share the
AMDGPU_RAS_BLOCK__MCA block id and are distinguished only by
sub_block_index. The ras manager object for an mca block is selected
with:
Since the rework in commit 7f544c5488cf ("drm/amdgpu: Rework mca ras
sw_init") moved the ras_comm setup into amdgpu_mca_mp*_ras_sw_init() but
left sub_block_index unset, mp0/mp1/mpio all default to index 0 and
collide on the same object slot. mp0 grabs the slot and creates its
sysfs node first; mp1 (and mpio) then find the slot already in use, so
amdgpu_ras_block_late_init() -> amdgpu_ras_sysfs_create() returns
-EINVAL:
amdgpu: mca.mp1 failed to execute ras_block_late_init_default! ret:-22
amdgpu: amdgpu_ras_late_init failed -22
amdgpu: amdgpu_device_ip_late_init failed
amdgpu: Fatal error during GPU init
The error is currently masked because amdgpu_ras_late_init() does not
check the return value of amdgpu_ras_block_late_init_default(), but it
already leaves mp1/mpio without their sysfs nodes and becomes a fatal
init failure as soon as that return value is honored.
Restore the per-sub-block sub_block_index assignment so each mca
sub-block maps to its own object slot.
Fixes: 7f544c5488cf ("drm/amdgpu: Rework mca ras sw_init") Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunil Khatri [Mon, 25 May 2026 04:26:23 +0000 (09:56 +0530)]
drm/amdgpu/userq: move wptr_obj cleanup in mqd_destroy
In case when queue_create fails and mqd has already been
allocated and hence wptr_obj is not cleaned up.
So moving that cleanup part to mqd_destroy so it takes
care of all the cases of clean up and during tear down of
the queue.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiang Liu [Fri, 29 May 2026 14:11:26 +0000 (22:11 +0800)]
drm/amd/ras: chunk UNIRAS CPER debugfs reads
Legacy CPER ring readers can issue one debugfs read with a buffer larger
than the UNIRAS RAS command payload limit. Passing that full size to
GET_CPER_RECORD makes the command reject the request, so userspace may
only see the ring prefix and treat the CPER stream as empty.
Commit 3c88fb7aa57d ("drm/amd/ras: bound CPER record fetch buffer
size") intentionally bounds CPER record fetch allocation by the command
buffer size. Keep the debugfs ABI as a single contiguous ring read by
splitting the internal GET_CPER_RECORD requests into
RAS_CMD_MAX_CPER_BUF_SZ chunks.
Accumulate the copied payload and update the legacy header write pointers
from the total bytes returned to userspace.
Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Tue, 26 May 2026 02:25:26 +0000 (10:25 +0800)]
drm/amdgpu: improve the userq seq BO free bit lookup
Use find_next_zero_bit() to locate the next free seq slot bit
instead of the current walk, for more efficient bitmap scanning.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
_PR3 detection was changed in commit 134b8c5d8674 ("drm/amd: Fix
detection of _PR3 on the PCIe root port") to look at the root port
of the topology containing the GPU. This however was too far because
it ignored whether or not all the intermediary bridges could power
off the device. The original design in commit b10c1c5b3a4e ("drm/amdgpu:
add check for ACPI power resources") was too narrow because it matched
the switches internal to the GPU.
Use the goldilocks approach and look for the first bridge outside of the
GPU and check for _PR3 on that device.
Fixes: 134b8c5d8674 ("drm/amd: Fix detection of _PR3 on the PCIe root port") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chenglei Xie [Thu, 7 May 2026 14:29:10 +0000 (10:29 -0400)]
drm/amdgpu: grow VF RAS bad page table with bounded dynamic alloc
The VF RAS error handler used fixed-size bps[] / bps_bo[] arrays (512
slots). When the PF2VF bad-page block listed more entries than fit,
amdgpu_virt_ras_add_bps() could memcpy() past the end of those arrays.
Replace the fixed backing store with a dynamically grown table:
- Add capacity to track allocated slots separately from count.
- Start at 512 slots and realloc bps / bps_bo together when full.
- Refuse growth beyond maximum EEPROM record limit (AMDGPU_VIRT_RAS_BAD_PAGE_TABLE_MAX_CAPACITY).
- Return failure from amdgpu_virt_ras_add_bps() and stop processing
the PF2VF block if allocation fails or the cap is reached.
Sunil Khatri [Mon, 25 May 2026 07:48:00 +0000 (13:18 +0530)]
drm/amdgpu/userq: remove the vital queue unmap logging
Mesa userqueues free does not wait for the free to complete and go ahead
in unmapping the vital bos while kernel is still in queue free and
corresponding cleanup.
So ideally we don't need the logging for that and hence remove the warn
message as this is expected behaviour and functionally, we are making
sure to wait for the required fences before unmap.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Martin [Thu, 28 May 2026 16:54:39 +0000 (12:54 -0400)]
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
Fixes: cc009e613de6 ("drm/amdkfd: Add KFD support for soc21 v3") Assisted-by: Claude:Sonnet 4-5 Signed-off-by: Andrew Martin <andrew.martin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Muhammad Bilal [Sat, 23 May 2026 16:56:46 +0000 (16:56 +0000)]
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
Fixes: a70a93fa568b ("drm/amdkfd: add debug suspend and resume process queues operation") Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: widen FRL debug knobs to unsigned int
force_frl_rate, select_ffe and limit_ffe in dc_debug_options carry
non-negative configuration values: an FRL link-rate enum (0..0xF), an
FFE level selector and an FFE level limit. They are only ever compared
against 0/0xF, assigned, or cast to uint8_t before being written to
hardware. No call site relies on signed semantics.
Make the types unsigned int to match how the values are actually used
and to silence MISRA-style signedness warnings on internal builds.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaly Prosyak [Fri, 29 May 2026 17:50:38 +0000 (13:50 -0400)]
drm/amdgpu: set noretry=1 as default for GFX 10.1.x (Navi10/12/14)
Problem:
While developing the amd_close_race IGT test (which intentionally triggers
execute permission faults by removing VM_PAGE_EXECUTABLE from GPU page table
entries), we discovered that on Navi10 (GFX 10.1.x) these faults produce
zero diagnostic output. The GPU simply hangs silently for ~10s until the
scheduler timeout fires. There is no way to distinguish an execute
permission fault from any other type of GPU hang.
Root cause:
GFX 10.1.x defaults to noretry=0, which sets
RETRY_PERMISSION_OR_INVALID_PAGE_FAULT=1 in the GFXHUB UTCL2 registers
(gfxhub_v2_0.c line 313). With this bit set, permission faults (valid PTE,
wrong R/W/X bits) are handled entirely within the UTCL1/UTCL2 hardware
loop: UTCL2 returns an XNACK to UTCL1, and UTCL1 re-requests the
translation indefinitely, expecting software to eventually fix the
permission bits (as happens in SVM/HMM recovery). No interrupt of any kind
reaches the IH ring.
This is different from invalid-page faults (V=0) which DO generate a retry
fault interrupt that the driver can escalate to a no-retry fault. Permission
faults with valid PTEs loop silently forever in hardware.
GFX 10.3+ already defaults to noretry=1, which makes permission faults
generate immediate L2 protection fault interrupts. GFX 10.1.x was
inadvertently left out of this default.
Fix:
Change the noretry=1 threshold from IP_VERSION(10, 3, 0) to
IP_VERSION(10, 1, 0) in amdgpu_gmc_noretry_set(). This is a one-line
change that aligns GFX 10.1.x behavior with GFX 10.3+ and all newer
generations.
With noretry=1, the existing non-retry fault handler
(gmc_v10_0_process_interrupt) already decodes and prints the full
GCVM_L2_PROTECTION_FAULT_STATUS register including PERMISSION_FAULTS,
faulting address, VMID, PASID, and process name. No additional logging
code is needed — the fix is purely routing permission faults to the
existing, fully-capable non-retry interrupt handler.
v2: Dropped GFX10-specific logging from gmc_v10_0.c and
kfd_int_process_v10.c (Felix Kuehling). v1 added logging in the retry
fault handler, but with noretry=1 permission faults take the non-retry
path — the v1 retry handler code was dead and would never execute.
Tested on Navi10 (GFX 10.1.10):
- Execute permission faults now produce immediate, clear output:
[gfxhub] page fault (src_id:0 ring:64 vmid:4 pasid:592)
Process amd_close_race pid 13380 thread amd_close_race pid 13384
in page at address 0x40001000 from client 0x1b (UTCL2)
GCVM_L2_PROTECTION_FAULT_STATUS:0x00700881
PERMISSION_FAULTS: 0x8
- No regressions with properly-mapped GPU workloads
Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Mon, 25 May 2026 11:45:02 +0000 (13:45 +0200)]
drm/amdgpu/gfxhub: Program CRASH_ON_*_FAULT bits to 0 as needed
When the fault stop mode isn't AMDGPU_VM_FAULT_STOP_ALWAYS,
these bits should be programmed to 0.
Program CRASH_ON_NO_RETRY_FAULT and CRASH_ON_RETRY_FAULT
always, to make sure to clear the bits when we don't want
to crash.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Feb 2026 12:05:46 +0000 (13:05 +0100)]
drm/amdgpu: fix waiting for all submissions for userptrs
Wait for all submissions when userptrs need to be invalidated by the MMU
notifier, not just the one the userptr was involved into.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Mon, 11 May 2026 08:33:37 +0000 (16:33 +0800)]
drm/amd/pm: zero unused SMU argument registers
SMU messages may use fewer arguments than the available argument registers,
the previous code only wrote used registers and left the rest unchanged,
so stale values from a prior message could persist.
Write all argument registers for each message and zero the unused tail
to keep command arguments deterministic and avoid unintended carry-over.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Tue, 19 May 2026 03:18:12 +0000 (11:18 +0800)]
drm/amd/pm: fix smu13 power limit default/cap calculation
smu_v13_0_0_get_power_limit() and smu_v13_0_7_get_power_limit() mix
runtime power_limit with PP table limits when reporting default/min/max.
When current power limit query succeeds, default_power_limit was set to the
runtime value instead of the PP table default, and min/max could be derived
from inconsistent bases (MsgLimits/runtime), leading to incorrect cap info.
Use SocketPowerLimitAc/Dc as the PP default base (pp_limit), keep
current_power_limit as runtime value, and derive min/max from pp_limit with
OD percentages.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5227 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Thu, 21 May 2026 14:36:37 +0000 (22:36 +0800)]
drm/amd/pm: apply SMU 13.0.10 workaround during MP1 unload
On SMU v13.0.10, sending PrepareMp1ForUnload with the default
parameter may leave the device in an inaccessible state. This can
affect runtime power management and partial PnP flows.
e.g: kexec, driver unload, boco/d3cold.
Pass the required workaround parameter 0x55, when preparing MP1 for
unload on SMU v13.0.10, keep the existing behavior for other SMU
versions.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5133 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 19 May 2026 10:42:09 +0000 (18:42 +0800)]
drm/amdgpu: NUL-terminate securedisplay debugfs input from userspace
Use strncpy_from_user() instead of copy_from_user() before sscanf() in
the securedisplay_test debugfs write handler so a full-length write
cannot leave the stack buffer without a terminator.
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 19 May 2026 09:31:54 +0000 (17:31 +0800)]
drm/amdgpu: validate RAS EEPROM tbl_size before record count
Corrupt EEPROM data can set tbl_size below the table header size.
Guard the RAS_NUM_RECS macros against undersized tbl_size and reset
the table during init when tbl_size is below the minimum for the table
version instead of trusting the header.
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 19 May 2026 09:31:21 +0000 (17:31 +0800)]
drm/amd/ras: validate RAS EEPROM tbl_size before record count
Corrupt EEPROM data can set tbl_size below the table header size.
Guard the RAS_NUM_RECS macros against undersized tbl_size and reset
the table during init when tbl_size is below the minimum for the table
version instead of trusting the header.
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Tue, 12 May 2026 07:44:32 +0000 (15:44 +0800)]
drm/amd/pm: bound pp_dpm_set_pp_table() memcpy
The powerplay path allocates hardcode_pp_table once with kmemdup(...,
soft_pp_table_size). memcpy(..., size) used the sysfs store count (up to
PAGE_SIZE) with no upper bound, causing heap overflow. Reject
writes where size exceeds soft_pp_table_size.
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The thermal_throttling_logging sysfs store function accepts negative
values like -1 and -9999999, which are nonsensical for a logging interval.
Current behavior:
- Values <= 0 disable logging (intended for 0 only)
- Values 1-3600 enable logging with interval in seconds
- Negative values are accepted and treated as disable
Issue:
Large negative values like -9999999 make no semantic sense and could
indicate input validation bypass attempts. While they functionally
disable logging (same as 0), accepting arbitrary negative values
suggests inadequate input validation.
Fix:
Add explicit check to reject values < 0 before processing.
Only accept:
- 0: disable thermal throttling logging
- 1-3600: enable with interval in seconds (existing validation)
This improves input validation and makes the interface more robust.
Test Results Before Fix:
thermal_throttling_logging: 6 failures
- Accepted: 0, -1, -9999999, -2147483648, empty string, 0777
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / linux / log