Alexander Viro [Fri, 20 Feb 2004 10:41:57 +0000 (02:41 -0800)]
[PKT_SCHED]: Convert to {subsys,module}_initcall(), fix init failure bugs in sch_teql.c
pktsched_init() and tc_filter_init() converted to subsys_initcall().
initialization of individual qdisc and tcf_proto switched to
module_init(). Some of them used to be registered twice if built-in, BTW.
init failure handling in sch_teql.c fixed - it used to leave objects
(both qdisc and netdev) registered if insmod failed.
Andrew Morton [Fri, 20 Feb 2004 09:33:18 +0000 (01:33 -0800)]
[PATCH] MIPS mega-patch
From: Ralf Baechle <ralf@linux-mips.org>
Below following 125547 lines of patches, all to arch/mips and
include/asm-mips. I'm going to send the remaining stuff of which the one
or other bit may need to be discussed in smaller bits.
Holger Schurig [Fri, 20 Feb 2004 16:52:31 +0000 (16:52 +0000)]
[ARM PATCH] 1670/1: PXA serial driver
Patch from Holger Schurig
PXA Serial port (FFUART, BTUART, STUART) and console support
This patch works perfectly here with "console=ttyS0,115200" in the
kernel command line. It contains Jean-frederic Clere fix to detect
STUART and BTUART.
Nico said that I should post it to your patch tracker. It replaces patch 1662/1
Follows your suggestion and also removes the #ifdef around
pci_unmap_addr and friends. Since pci.h should only be getting
included if PCI is enabled by PCI drivers and core, we shouldn't
need the NOP version.
Tony Lindgren [Fri, 20 Feb 2004 10:09:26 +0000 (10:09 +0000)]
[ARM PATCH] 1759/1: Add ARM925 support, updated
Patch from Tony Lindgren
The following patch adds the ARM925 processor support.
This patch is based on the proc-arm925.S in 2.4 kernel, and it has been
modified to be more like the ARM926 support in the 2.6 kernel, except for
the cache flushing and initialization. Also, this patch fixes the
writeback cache flushing for most part.
There are still some issues with writeback cache flushing with devices
using direct memory access, such as USB OHCI. It is recommended to use
the writethrough instead if using USB. This is the default for OMAP-1510.
OMAP-1610 does not have these issues, as it uses ARM926 core.
This patch includes the update for the processor functions to be armv4t
instead armv5t as suggested here:
Harald Welte [Fri, 20 Feb 2004 06:52:20 +0000 (22:52 -0800)]
[NETFILTER]: Resync with 2.4.x
- Update listhelp.h to benefit from prefetching
- More efficient selective_cleanup() impl. in conntrack
- Export number of conntrack buckets via r/o sysctl.
Carlos Puchol [Thu, 19 Feb 2004 14:14:58 +0000 (06:14 -0800)]
[PATCH] initial support for transmeta's efficeon processors
This implements the initial support for the AGP gart in Transmeta's
Efficeon processors.
This code is based on linus' code from a while ago. Peter and I adapted
it for the current kernel.
The note at the top indicates how it was tested, known issues, and so
forth. It is working quite well, and we'll work to fix the minor issues
and test it some more with s3, more cards, other southbridges, etc.,
next.
Andrew Morton [Thu, 19 Feb 2004 13:41:53 +0000 (05:41 -0800)]
[PATCH] Fix the display of max-ever-used-stack in sysrq-T output
The sysrq-T output currently tries to display the mimimum amount of free
stack which each task has ever had available. It has been busted for years,
because we forgot to zero out the stack when it is first created.
Fix that up, adding a conig option for it.
If the option is disabled, or the arch is not x86 then the free stack usage
will display as zero.
This fixes the behaviour of the pmac "macio" IDE driver when a DMA
transfer happen to get less data out of the device than expected when
setting up the DMA commands (the device underruns). This is very common
with recent ATAPI stuffs and used to cause problem & disable DMA. This
patch fixes the way we handle that condition, thus also fixing DVD
burning on a bunch of recent pmacs.
[PATCH] Be careful about memory ordering in sungem driver
Some barriers between setting up the DMA regions and writing the
descriptor addresses would be most useful.
I had some in my 2.4 version but they got lost someway, probably me not
properly merging with davem at this point. The 970 is definitely more
agressive at re-ordering stores than previous CPUs...
Here is a patch adding some (probably too much, but better safe than
sorry).
People ask how to write the CIS on a SmartMedia card using an sddr09
reader/writer. The patch below documents the required command (but does
not add the code).
Two years ago or so I used this to fix the CIS on a card that my camera no
longer wanted to accept. A Linux utility to do this might be useful, but
the problem always is that we do not really have a good mechanism.
How does one tell a driver that it has to do something special? Add yet
another ioctl?
Alan Stern [Thu, 19 Feb 2004 07:34:39 +0000 (23:34 -0800)]
[PATCH] USB: Use driver-model logging in the UHCI driver
The main item in this patch is the conversion of the UHCI driver from
using the old usb.h logging macros to the new driver-model dev_xxx
macros.
There are a few other minor changes too: updated version number, author,
copyright, and maintainer information, removed some unneeded error
messages, added some line breaks, added a convenience macro for the device
pointer.
Alan Stern [Thu, 19 Feb 2004 07:34:09 +0000 (23:34 -0800)]
[PATCH] USB: Repair unusual_devs.h entry
On Fri, 20 Feb 2004, Gustavo Guillermo wrote:
> Ok, I tested the patch, The camera works, just as in the old Kernel,
> Thanks, I'm including as an atachment the /proc/bus/usb/devices from
> kernel 2.4.x and 2.6.x, and the kernel log for 2.4.x, but ooops, I forgot
> to biold 2.4.x with full debug, if someone need it I will do.
>
> Please include this FIX in the Next Release.
Greg, I now feel confident that this patch should be applied.
Alan Stern [Thu, 19 Feb 2004 07:32:56 +0000 (23:32 -0800)]
[PATCH] USB: Another unusual_devs.h update
On Thu, 19 Feb 2004, Agustin De Igartua wrote:
> Initializing USB Mass Storage driver...
> usb-storage: This device (04e6,0002,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h
> Please send a copy of this message to <linux-usb-devel@lists.sourceforge.net>scsi0 : SCSI emulation for USB Mass Storage devices
Thank you for sending this in. Greg, here's the patch.
Pat Gefre [Thu, 19 Feb 2004 03:06:58 +0000 (19:06 -0800)]
[PATCH] ia64: cleanup SN2 pci_bus_cvlink.c
I incorporated (at least in spirit I hope) hch's suggestions on the fixup code
put in some kfrees that I was missing and static for sn_alloc_pci_sysdata
(thanks Bartlomiej Zolnierkiewicz). White space clean up.
projects / linux / log