The driver doesn't make use of the value that was explicitly assigned to
the .driver_data members. Drop the assignment. While touching the array,
convert it to use named initialization which is easier to understand.
Input: Use named initializers for arrays of i2c_device_data
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Input: tsc2007 - reduce I2C transactions for Z2 read
The current implementation sends a separate power-down command
after reading the Z2 value, resulting in an extra I2C
transaction per measurement cycle.
The TSC2007 command byte contains a 2-bit power-down mode
selection field. By selecting the power-down state in the Z2
measurement command, the device powers down after the Z2 A/D
conversion completes, eliminating the subsequent power-down
transaction.
This reduces the number of I2C transactions by one per touch
measurement cycle, decreasing I2C bus overhead and improving
touch sampling performance.
Ricardo Ribalda [Mon, 4 May 2026 10:55:03 +0000 (10:55 +0000)]
Input: atmel_mxt_ts - set byte_offset as signed
The calculations done to obtain byte_offset can result into a negative
number, fix its type.
This patch fixes the following sparse error:
drivers/input/touchscreen/atmel_mxt_ts.c:1481:44: warning: unsigned value that used to be signed checked against zero?
drivers/input/touchscreen/atmel_mxt_ts.c:1479:49: signed value source
Petr Hodina [Sun, 26 Apr 2026 20:57:41 +0000 (13:57 -0700)]
Input: stmfts - add optional reset GPIO support
Add support for an optional "reset-gpios" property. If present, the
driver drives the reset line high at probe time and releases it during
power-on, after the regulators have been enabled.
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com> Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://patch.msgid.link/20260409-stmfts5-v4-8-64fe62027db5@ixit.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Heidelberg [Sun, 26 Apr 2026 20:01:31 +0000 (13:01 -0700)]
Input: stmfts - fix the MODULE_LICENSE() string
Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
value does not declare the module's exact license, but only lets the
module loader test whether the module is Free Software or not.
See commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs.
"GPL v2" bogosity") in the details of the issue. The fix is to use
"GPL" for all modules under any variant of the GPL.
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free.
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
The `ims_pcu_process_data()` processes incoming URB data byte by byte.
However, it fails to check if the `read_pos` index exceeds
IMS_PCU_BUF_SIZE.
If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,
`read_pos` will increment indefinitely. Moreover, since `read_pos` is
located immediately after `read_buf`, the attacker can overwrite
`read_pos` itself to arbitrarily control the index.
This manipulated `read_pos` is subsequently used in
`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a
heap buffer overflow.
Specifically, an attacker can overwrite the `cmd_done.wait.head` located
at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.
Consequently, when the driver calls `complete(&pcu->cmd_done)`, it
triggers a control flow hijack by using the manipulated pointer.
Fix this by adding a bounds check for `read_pos` before writing to
`read_buf`. If the packet is too long, discard it, log a warning,
and reset the parser state.
Fixes: 628329d524743 ("Input: add IMS Passenger Control Unit driver") Co-developed-by: Sanghoon Choi <csh0052@gmail.com> Signed-off-by: Sanghoon Choi <csh0052@gmail.com> Signed-off-by: Seungjin Bae <eeodqql09@gmail.com> Link: https://patch.msgid.link/20251221211442.841549-2-eeodqql09@gmail.com
[dtor: factor out resetting packet state, reset checksum as well] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Thu, 8 Aug 2024 17:27:31 +0000 (10:27 -0700)]
Input: ct82c710 - remove driver
This is a PS/2 mouse interface chip from Chips & Technologies that was
used in TI TravelMate and Gateway Nomad laptops, which used 386 and 486
CPUs. With 486 support being removed from the kernel (and 386 support is
long gone) it is time to retire this driver as well.
Dmitry Torokhov [Thu, 8 Aug 2024 17:27:30 +0000 (10:27 -0700)]
Input: mk712 - remove driver
This touchscreen controller was used om Gateway AOL Connected Touchpad
released in 2000 and, according to Wikipedia, removed from the market
in October 2001 due to slow sales.
It looks like it can still be bought on eBay for $1000 but I really
doubt anyone will actually use it.
Dmitry Torokhov [Thu, 8 Aug 2024 17:27:27 +0000 (10:27 -0700)]
Input: inport - remove driver
Inport (ATI XL and Microsoft) mice use specialized bus interface
implemented via an ISA add-in card. Have been superseded by PS/2 and
then USB, and are historical curiosity by now.
Input: aiptek - validate raw macro indices before updating state
aiptek_irq() derives macro key indices directly from tablet reports and
then uses them to index macroKeyEvents[]. Report types 4 and 5 also save
the derived value in aiptek->lastMacro and later use that state to
release the previous key.
Validate the raw macro index once before it enters that state machine, so
lastMacro only ever stores an in-range macro key. Keep direct bounds
checks for report type 6, which reads the macro number from the packet
body and uses it immediately.
gf2k_read() decodes the hat position from a 4-bit field and uses it
directly to index gf2k_hat_to_axis[]. The lookup table only has nine
entries, so malformed packets can read past the end of the fixed table.
Skip hat reporting when the decoded value falls outside the lookup
table instead of forcing it to the neutral position. This keeps the
fix local and avoids reporting a made-up axis state for malformed
packets.
Elliot Tester [Wed, 25 Mar 2026 22:16:17 +0000 (23:16 +0100)]
Input: xpad - remove stale TODO and changelog header
All items in the TODO block have since been addressed: axis tuning,
analog button handling, rumble support, and dance pad USB IDs are all
implemented. The manual changelog is also removed as history is tracked
in git.
Johan Hovold [Wed, 1 Apr 2026 08:22:12 +0000 (10:22 +0200)]
Input: usbtouchscreen - refactor endpoint lookup
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.
Note that the NEXIO data interface has two bulk endpoints (see commit 5197424cdccc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
for the descriptors).
The lookup in probe handles both bulk-in and interrupt-in endpoints and
was added to handle NEXIO devices. Replace the open coded lookup with a
lookup for the common interrupt endpoint and an explicit fallback
accepting a bulk endpoint.
This iterates over the (two) endpoints twice for NEXIO devices but makes
it more clear what is going on.
Add bindings for the Awinic AW86938 haptic chip which can be found in
smartphones. These two chips require a similar devicetree configuration,
but have a register layout that's not 100% compatible.
Still, because chip model is fully detectable via ID register, these
chips can be documnented in the same file.
Val Packett [Sat, 21 Mar 2026 07:30:07 +0000 (04:30 -0300)]
Input: goodix-berlin - report a resolution of 10 units/mm
Without a reported resolution, userspace was assuming 1 unit/mm which
is wildly wrong: a regular smartphone is clearly not 2.4 meters tall.
Most applications do not care much for this kind of raw mm value,
but Phosh's on-screen keyboard would accidentally trigger swipe-to-close
gestures due to misinterpreting small movements as huge ones.
Do what the older goodix.c driver does and set the resolution to 10
units/mm to make sure the numbers calculated by userspace are reasonable.
Dmitry Torokhov [Wed, 14 Aug 2024 21:22:13 +0000 (14:22 -0700)]
Input: sx8654 - use IRQF_NOAUTOEN when requesting interrupt
Instead of requesting interrupt normally and immediately disabling it
with call to disable_irq() use IRQF_NOAUTOEN to keep it disabled until
it is needed. This avoids a tiny window when interrupt is enabled but
not needed.
Input: mk712 - use guard notation when acquiring spinlock
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Do not define or use iqs5xx_ihex_rec structure: the original code was
using just a couple of fields in it and instead used it to calculate
offset to record data. The data field was actually reserving space for
checksum.
Instead iterate through fields and advance pointer explicitly.
Mikko Perttunen [Tue, 3 Mar 2026 04:32:11 +0000 (13:32 +0900)]
i2c: tegra: Don't mark devices with pins as IRQ safe
I2C devices with associated pinctrl states (DPAUX I2C controllers)
will change pinctrl state during runtime PM. This requires taking
a mutex, so these devices cannot be marked as IRQ safe.
Linus Torvalds [Sun, 22 Mar 2026 18:16:06 +0000 (11:16 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix how linked registers track zero extension of subregisters (Daniel
Borkmann)
- Fix unsound scalar fork for OR instructions (Daniel Wade)
- Fix exception exit lock check for subprogs (Ihor Solodrai)
- Fix undefined behavior in interpreter for SDIV/SMOD instructions
(Jenny Guanni Qu)
- Release module's BTF when module is unloaded (Kumar Kartikeya
Dwivedi)
- Fix constant blinding for PROBE_MEM32 instructions (Sachin Kumar)
- Reset register ID for END instructions to prevent incorrect value
tracking (Yazhou Tang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a test cases for sync_linked_regs regarding zext propagation
bpf: Fix sync_linked_regs regarding BPF_ADD_CONST32 zext propagation
selftests/bpf: Add tests for maybe_fork_scalars() OR vs AND handling
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
selftests/bpf: Add tests for sdiv32/smod32 with INT_MIN dividend
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
selftests/bpf: Add tests for bpf_throw lock leak from subprogs
bpf: Fix exception exit lock checking for subprogs
bpf: Release module BTF IDR before module unload
selftests/bpf: Fix pkg-config call on static builds
bpf: Fix constant blinding for PROBE_MEM32 stores
selftests/bpf: Add test for BPF_END register ID reset
bpf: Reset register ID for BPF_END value tracking
Linus Torvalds [Sun, 22 Mar 2026 18:10:31 +0000 (11:10 -0700)]
Merge tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task
and recording the pid would be redundant. This turned out to be
incorrect and there are a few corner case where this is not true and
caused some regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses
a per-cpu temporary buffer and disables migration, then enables
preemption, does the copy from user space, disables preemption,
enables migration and checks if there was any schedule switches while
preemption was enabled. If there was a context switch, then it is
considered that the per-cpu buffer could be corrupted and it tries
again. There's a protection check that tests if it takes a hundred
tries, it issues a warning and exits out to prevent a live lock.
This was triggered because the task was selected by the load balancer
to be migrated to another CPU, every time preemption is enabled the
migration task would schedule in try to migrate the task but can't
because migration is disabled and let it run again. This caused the
scheduler to schedule out the task every time it enabled preemption
and made the loop never exit (until the 100 iteration test
triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This
will let the migration thread migrate the task and the copy from user
space will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a
copy of a write to the trace_marker file of the top level instance.
This is managed by a link list protected by RCU. When an instance is
removed, a check is made if the option is set, and if so
synchronized_rcu() is called.
The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups)
was done before the check of the copy_trace_marker option and that
option was cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of
copy_trace_marker to do synchronize_rcu() so that the option is still
set if it was before and the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The
validator was updating cpu_buffer->head_page (the first sub-buffer of
the per-cpu buffer) and not the "head_page" variable that was
iterating the sub-buffers. This was causing the first sub-buffer to
be assigned the entries for each sub-buffer and not the sub-buffer
that was supposed to be updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary
callback to all the callback functions of the ftrace ops and not just
the functions represented by the passed in hash. This causes an
unnecessary slow down of the functions of the ftrace_ops that is not
being modified. Only update the functions that are going to be
modified to call the ftrace loop function so that the update can be
made on those functions.
* tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
tracing: Fix trace_marker copy link list updates
tracing: Fix failure to read user space from system call trace events
tracing: Revert "tracing: Remove pid in task_rename tracing output"
Linus Torvalds [Sun, 22 Mar 2026 18:05:34 +0000 (11:05 -0700)]
Merge tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix broken I2C communication on Armada 3700 with recovery
- fix device_node reference leak in probe (fsi)
- fix NULL-deref when serial string is missing (cp2615)
* tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: defer reset on Armada 3700 when recovery is used
i2c: fsi: Fix a potential leak in fsi_i2c_probe()
i2c: cp2615: fix serial string NULL-deref at probe
Linus Torvalds [Sun, 22 Mar 2026 17:54:12 +0000 (10:54 -0700)]
Merge tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Improve Qemu MCE-injection behavior by only using AMD SMCA MSRs if
the feature bit is set
- Fix the relative path of gettimeofday.c inclusion in vclock_gettime.c
- Fix a boot crash on UV clusters when a socket is marked as
'deconfigured' which are mapped to the SOCK_EMPTY node ID by
the UV firmware, while Linux APIs expect NUMA_NO_NODE.
The difference being (0xffff [unsigned short ~0]) vs [int -1]
* tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Handle deconfigured sockets
x86/entry/vdso: Fix path of included gettimeofday.c
x86/mce/amd: Check SMCA feature bit before accessing SMCA MSRs
Linus Torvalds [Sun, 22 Mar 2026 17:31:51 +0000 (10:31 -0700)]
Merge tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
- Fix a PMU driver crash on AMD EPYC systems, caused by
a race condition in x86_pmu_enable()
- Fix a possible counter-initialization bug in x86_pmu_enable()
- Fix a counter inheritance bug in inherit_event() and
__perf_event_read()
- Fix an Intel PMU driver branch constraints handling bug
found by UBSAN
- Fix the Intel PMU driver's new Off-Module Response (OMR)
support code for Diamond Rapids / Nova lake, to fix a snoop
information parsing bug
* tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix OMR snoop information parsing issues
perf/x86/intel: Add missing branch counters constraint apply
perf: Make sure to use pmu_ctx->pmu for groups
x86/perf: Make sure to program the counter value for stopped events on migration
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
Linus Torvalds [Sun, 22 Mar 2026 17:17:50 +0000 (10:17 -0700)]
Merge tag 'objtool-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix three more livepatching related build environment bugs, and a
false positive warning with Clang jump tables"
* tag 'objtool-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix Clang jump table detection
livepatch/klp-build: Fix inconsistent kernel version
objtool/klp: fix mkstemp() failure with long paths
objtool/klp: fix data alignment in __clone_symbol()
Linus Torvalds [Sun, 22 Mar 2026 16:57:20 +0000 (09:57 -0700)]
Merge tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a sparse build error regression in <linux/local_lock_internal.h>
caused by the locking context-analysis changes"
* tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
include/linux/local_lock_internal.h: Make this header file again compatible with sparse
Linus Torvalds [Sun, 22 Mar 2026 16:55:58 +0000 (09:55 -0700)]
Merge tag 'irq-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a mailbox channel leak in the riscv-rpmi-sysmsi irqchip driver"
* tag 'irq-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-rpmi-sysmsi: Fix mailbox channel leak in rpmi_sysmsi_probe()
Linus Torvalds [Sat, 21 Mar 2026 23:59:09 +0000 (16:59 -0700)]
Merge tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
* tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: platform: use generic driver_override infrastructure
sh: platform_early: remove pdev->driver_override check
hwmon: axi-fan: don't use driver_override as IRQ name
docs: driver-model: document driver_override
driver core: generalize driver_override in struct device
projects / linux / log