btrfs: resume the delayed-ref merge walk instead of restarting it
btrfs_merge_delayed_refs() restarts its walk of a head's ref tree from
rb_first_cached() every time merge_ref() reports a merge:
again:
for (node = rb_first_cached(&head->ref_tree); node;
node = rb_next(node)) {
ref = rb_entry(node, ...);
if (seq && ref->seq >= seq)
continue;
if (merge_ref(fs_info, delayed_refs, head, ref, seq))
goto again;
}
The restart is there because merge_ref() returns true only when it has
freed the caller's cursor node, so the caller cannot call rb_next() on it.
That makes the walk quadratic in the number of refs on the head, and it
runs with head->lock held -- a spinlock -- so it cannot be broken up.
On a filesystem doing continuous backref resolution this is not
theoretical. Each backref walk advances fs_info->tree_mod_seq, and
init_delayed_ref_common() stamps that seq into every new fs-tree ref, so
refs to the same block and root stop comparing equal and stop being merged
at insert time by insert_delayed_ref(). They accumulate as separate nodes
in one contiguous group instead, and the merge walk restarts across the
whole group on every cancelling pair.
Measured with the ftrace function profiler on a filesystem running a
dedupe agent and a verifier that both walk backrefs continuously, during a
stall, over a 60 second window:
comp_refs() is called once per node the merge walk compares, so that is
10,170 comparisons per walk. Solving the restart structure's N^2/2 puts
roughly 143 refs on a head. comp_refs() is a leaf, so its own total is
not distorted by nesting: 38.9 CPU-seconds of that 60 second window went
to comparing delayed refs and nothing else, with the transaction thread
pinned at 100% of a core and zero tasks anywhere in the machine waiting on
IO.
The cost is not subtle. Every other task queued behind the commit;
relocation of a single block group made no progress for three and a half
hours; snapshot deletion, which had been clearing about 49 subvolumes a
minute, stopped entirely. An earlier instance on the same machine
produced a 26 second soft lockup with the stack inside the merge walk.
merge_ref() does not actually need the caller to restart. It advances its
own cursor past a node before freeing that node:
so it always holds a position that survives the frees, and there are only
three ways it can end having freed the caller's node:
- it swapped, and the survivor keeps a non-zero ref_mod. The caller's node is
freed; the survivor is still in the tree and may still merge with what
follows, so the walk resumes at the survivor.
- the caller's ref_mod reached zero, with or without a swap. Both nodes are
gone, and the local cursor -- already advanced past the freed one -- is the
resume point, or NULL to end the walk.
Return whether @ref was freed, and hand the position back through an out
parameter. The two cannot be folded into one pointer: the resume position
is legitimately NULL when the freed node was last in the tree, and a NULL
return would then tell the caller its own node is still live. The walk becomes strictly forward and linear, and nothing is left
unmerged.
Skipping the re-examination that the restart performed does not lose
merges. comp_refs() keys on type and root-or-parent, neither of which any
merge changes, so merging cannot make two previously incomparable refs
comparable. Mergeable refs are contiguous, because the tree is sorted by
comp_refs(..., check_seq = true) and the merge key is the same comparison
without the seq -- a prefix of the sort key. And a ref skipped by the seq
test stays skipped, since seq is read once per btrfs_merge_delayed_refs()
call.
The restart has had this shape since commit 0e0adbcfdc90 ("btrfs: track
refs in a rb_tree instead of a list") in v4.15.
Link: https://lore.kernel.org/r/20260912065623.398859879@linuxfoundation.org Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Wentao Guan <guanwentao@uniontech.com> Tested-by: Barry K. Nathan <barryn@pobox.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a new build failure with MT7996E=m MT76_CORE=y and NET_AIROHA_NPU=m:
ld.lld: error: undefined symbol: airoha_npu_get
ld.lld: error: undefined symbol: airoha_npu_put
>>> referenced by npu.c
>>> drivers/net/wireless/mediatek/mt76/npu.o:(mt76_npu_init) in archive vmlinux.a
Fix this by reworking the dependency for the MT7996_NPU to only
allow enabling that when mt76_core can link against the npu driver.
To make sure this gets caught more easily in the future when additional
mt76 variants need the same dependency, also turn CONFIG_MT76_NPU into
a tristate symbol that has the same dependency.
Fixes: 7fb554b1b623 ("wifi: mt76: Introduce the NPU generic layer") Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20260612201519.4054683-1-arnd@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init(), but it didn't check whether a cpuidle
driver was already registered.
For example, on Intel platforms, if the intel_idle driver is already
loaded, the code would still evaluate the _CST object in the ACPI
table and attempt to register the acpi_idle driver. This registration
would fail with -EBUSY due to the existing check in cpuidle_register_driver.
Add a check at the beginning of acpi_processor_register_idle_driver()
to avoid unnecessary _CST evaluate and potential registration failures.
Fixes: 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle driver registration") Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com> Link: https://patch.msgid.link/20260608190359.3254-1-TonyWWang-oc@zhaoxin.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function acpi_processor_cstate_first_run_checks() is currently called
only once during initialization in acpi_processor_register_idle_driver().
Since its execution is already limited by the caller's lifecycle, the
internal static 'first_run' variable is redundant and can be safely
removed.
Additionally, the current function name is no longer descriptive of its
behavior, so rename the function to acpi_processor_update_max_cstate()
to better reflect its actual purpose.
Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20260311065038.4151558-4-lihuisong@huawei.com
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 66c62e6773c5 ("ACPI: processor: Add cpuidle driver check in acpi_processor_register_idle_driver()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The function acpi_processor_cstate_first_run_checks() is responsible
for updating max_cstate and performing initial hardware validation.
Currently, this function is invoked within acpi_processor_power_init().
However, the initialization flow already ensures this is called during
acpi_processor_register_idle_driver(). Therefore, the call in
acpi_processor_power_init() is redundant and effectively performs no work,
so remove it.
Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://patch.msgid.link/20260311065038.4151558-2-lihuisong@huawei.com
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 66c62e6773c5 ("ACPI: processor: Add cpuidle driver check in acpi_processor_register_idle_driver()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Writing the current "dynamic_epp" state to sysfs fails with -EINVAL even
though the desired result was achieved. Allow writes to "dynamic_epp"
that does not modify the state.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-4-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If "dynamic_epp" is disabled, the driver initialization and the default
EPP selection from sysfs currently sets the EPP based on the power
supply state of the system at that time but there is no power supply
callbacks registered to toggle it when the power supply state changes.
This can lead to faster battery drain on platforms that start off while
being plugged to the wall but later move to battery power since the EPP
stays at AMD_CPPC_EPP_PERFORMANCE.
Use "epp_default_dc" as the default EPP selection when dynamic_epp is
disabled, restoring older behavior. On servers, this defaults to
AMD_CPPC_EPP_PERFORMANCE and on other platforms, it defaults to
AMD_CPPC_EPP_BALANCE_PERFORMANCE.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-6-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The energy performance preference field of the CPPC request MSR
supports values from 0 to 255, but the strings only offer 4 values.
The other values are useful for tuning the performance of some
workloads.
Add support for writing the raw energy performance preference value
to the sysfs file. If the last value written was an integer then
an integer will be returned. If the last value written was a string
then a string will be returned.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Stable-dep-of: caa822d312be ("cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
In case a new index is introduced add a static assert to make sure
that strings and values are updated.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Stable-dep-of: caa822d312be ("cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add whitespace around the equals and remove leading space.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Stable-dep-of: caa822d312be ("cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
Storing of the iw->head entry inside the wait_queue callback, or when
removing a waitid item, really should use proper load/store
acquire/release semantics, and KCSAN correctly warns of that. Ensure
that they do so.
Use it everywhere that the wait_queue_entry is removed from the head,
and be a bit more cautious in zeroing out iw->head whenever the entry is
removed from the list.
The fq change path accepts TCA_FQ_QUANTUM in [1, INT_MAX] and
TCA_FQ_INITIAL_QUANTUM up to INT_MAX, while fq_init() already clamps to
[1, 1<<20]. A user can override the init clamp via tc qdisc change,
restoring the small-quantum deficit spin that the init clamp prevents.
Narrow iq_range.max to 1<<20 so TCA_FQ_INITIAL_QUANTUM is rejected at
parse time. Clamp TCA_FQ_QUANTUM to [256, 1<<20] in fq_change() and
fq_init() quantum to [256, 1<<20] for tiny-MTU devices.
Conditions to recreate the bug:
CONFIG_NET_SCH_FQ=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root fq
tc qdisc change dev dummy0 root fq quantum 1 stab data 32768 size_log 15 cell_log 0
Fixes: 709f34f7c28d ("net/sched: fq: add overflow bounds to quantum and initial quantum") Reported-by: Vega <vega@nebusec.ai> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/QDISC-0CFC.v3.20260901204856@mojatatu.com.2 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When USB support is disabled, the array is not referenced anywhere,
causing a warning:
drivers/bluetooth/btmtk.c:35:3: error: 'btmtk_mt6639_devs' defined but not used [-Werror=unused-const-variable=]
35 | } btmtk_mt6639_devs[] = {
| ^~~~~~~~~~~~~~~~~
Move it into the #ifdef block.
Fixes: 28b7c5a6db74 ("Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Devmem tcp tx doesn't work without zero-copy, however it's not currently
enforced if NETIF_F_SG isn't present. In this case, tcp_sendmsg_locked()
will try the copy path and try to copy data from an iovec which consists
of offsets into the dma-buf and would normally fail. Moreover, d9c56501c72fd ("net: tcp: block mixing readable and unreadable frags")
relies on that and assumes that the devmem binding is present IFF we're
using the zero-copy path, which can be used to mix net-iov and pages in
a single skb, and break invariants. Let's reject devmem tx without
zero-copy.
Note, the parameter check the patch is modifying is too loose, we can
create an io_uring request with dmabuf_id and all ZC flags, but which
won't have the binding. We replace it with stricter validation.
Fixes: bd61848900bff ("net: devmem: Implement TX path") Fixes: d9c56501c72fd ("net: tcp: block mixing readable and unreadable frags") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/fdc2478d8f21268d7078556409887d8e6ba0ad32.1788529053.git.asml.silence@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit a5242d37c83a ("erofs: error out obviously illegal extents in
advance") changed the per-extent algorithm presence check from "is the
bit set" to "is the only bit set":
- !(sbi->available_compr_algs & (1 << map->m_algorithmformat))
+ (sbi->available_compr_algs ^ BIT(map->m_algorithmformat))
`available_compr_algs` is a bitmap of every compression algorithm
available in the image (z_erofs_parse_cfgs() iterates it with
for_each_set_bit()), so an image that enables more than one algorithm
has multiple bits set. XOR is zero only when the bitmap is exactly
BIT(map->m_algorithmformat); for any image with two or more algorithms
the test is non-zero for every extent and the read fails with
-EFSCORRUPTED ("inconsistent algorithmtype %u").
Reproducer (mkfs.erofs from erofs-utils 1.7.1):
$ mkdir src
$ yes A | head -c 100K > src/a
$ head -c 64K /dev/zero > src/b
$ mkfs.erofs -zlz4:deflate multi.erofs src
$ mount -t erofs -o loop multi.erofs /mnt
$ cat /mnt/a >/dev/null
cat: /mnt/a: Structure needs cleaning
$ dmesg | tail
erofs (device loop0): inconsistent algorithmtype 0 for nid 46
erofs (device loop0): read error -117 @ 0 of nid 46
The erofs on-disk format (Z_EROFS_COMPRESSION_MAX = 4 with LZ4, LZMA,
DEFLATE, ZSTD) and the kernel parser explicitly support
multi-algorithm images, and erofs-utils 1.7.1 generates them via the
"-z X:Y" syntax.
If the tail data can be inlined into the inode meta block, it should
be converted into a regular tail pcluster.
In principle, it should be converted into an uncompressed pcluster if
there is not enough gain to use compression (map->m_llen < map->m_plen);
but since there are various shipped images, relax the condition for
ztailpacking tail pcluster fallback instead of reporting corruption
incorrectly.
Reported-and-tested-by: Yifan Zhao <zhaoyifan28@huawei.com> Reported-by: Alberto Salvia Novella <es20490446e@gmail.com> Closes: https://github.com/erofs/erofs-utils/issues/51 Fixes: a5242d37c83a ("erofs: error out obviously illegal extents in advance") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure the dma state is initialized when we're not using the contiguous
iova, otherwise the caller may be using a stale state from a previous
request that could use the coalesed iova allocation.
Fixes: 2f6b2565d43cdb5 ("block: accumulate memory segment gaps per bio") Reported-by: Sebastian Ott <sebott@redhat.com> Tested-by: Sebastian Ott <sebott@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cloned bio needs to inherit the accumulated gaps between vectors so
that we can know if this bio can subscribe to the iova coalescing
optimization.
When cloning for a split, the gap only applies to the front bio since
that's as far as has been processed. The remaining bio can reset its
gaps to 0 since it advanced past the checked vectors, and will start its
accounting from there on the next split check.
Fixes: 2f6b2565d43c ("block: accumulate memory segment gaps per bio") Reported-by: Eric Auger <eauger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260819154937.3903312-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
security/integrity/secure_boot.c contains a single __weak function,
which breaks recordmcount when building with clang:
$ make -skj"$(nproc)" ARCH=powerpc LLVM=1 ppc64_defconfig security/integrity/secure_boot.o
Cannot find symbol for section 2: .text.
security/integrity/secure_boot.o: failed
Introduce a Kconfig symbol, CONFIG_HAVE_ARCH_GET_SECUREBOOT, to indicate
that an architecture provides a definition of arch_get_secureboot().
Provide a static inline stub when this symbol is not defined to achieve
the same effect as the __weak function, allowing secure_boot.c to be
removed altogether. Move the s390 definition of arch_get_secureboot()
out of the CONFIG_KEXEC_FILE block to ensure it is always available, as
it does not actually depend on KEXEC_FILE.
subns was renamed inview to better reflect the function of the flag.
Unfortunately the kernel-doc was not properly updated in 2 places.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602020737.vGCZFds1-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202602021427.PvvDjgyL-lkp@intel.com/ Fixes: 796c146fa6c82 ("apparmor: split xxx_in_ns into its two separate semantic use cases") Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
pinctrl/mediatek/pinctrl-airoha.c:2064:41: error: variable 'an7583_pinctrl_drive_e2_conf' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
2064 | static const struct airoha_pinctrl_conf an7583_pinctrl_drive_e2_conf[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Due to a typo, an7583_pinctrl_drive_e2_conf is only used within
ARRAY_SIZE() (hence no instance of -Wunused-variable), which is
evaluated at compile time, so it will not be needed in the final object
file.
Fix the .confs assignment for AIROHA_PINCTRL_CONFS_DRIVE_E2 in
an7583_pinctrl_match_data to clear up the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2142 Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver start registering a regulator, but can still be
enabled even when it is unable to call into the regulator
subsystem:
aarch64-linux-ld: drivers/phy/renesas/phy-rcar-gen3-usb2.o: in function `rcar_gen3_phy_usb2_probe':
phy-rcar-gen3-usb2.c:(.text+0x2884): undefined reference to `devm_regulator_register'
Add a Kconfig dependency to avoid this configuration.
The recent change for perf c2c annotate broke build without slang
support like below.
builtin-annotate.c: In function 'hists__find_annotations':
builtin-annotate.c:522:73: error: 'NO_ADDR' undeclared (first use in this function); did you mean 'NR_ADDR'?
522 | key = hist_entry__tui_annotate(he, evsel, NULL, NO_ADDR);
| ^~~~~~~
| NR_ADDR
builtin-annotate.c:522:73: note: each undeclared identifier is reported only once for each function it appears in
builtin-annotate.c:522:31: error: too many arguments to function 'hist_entry__tui_annotate'
522 | key = hist_entry__tui_annotate(he, evsel, NULL, NO_ADDR);
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from util/sort.h:6,
from builtin-annotate.c:28:
util/hist.h:756:19: note: declared here
756 | static inline int hist_entry__tui_annotate(struct hist_entry *he __maybe_unused,
| ^~~~~~~~~~~~~~~~~~~~~~~~
And I noticed that it missed to update the other side of #ifdef
HAVE_SLANG_SUPPORT. Let's fix it.
Cc: Tianyou Li <tianyou.li@intel.com> Fixes: cd3466cd2639783d ("perf c2c: Add annotation support to perf c2c report") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mt76_npu_device_active() and mt76_ppe_device_active() read dev->mmio.npu
and dev->mmio.ppe_dev. The mmio, usb and sdio bus structs share a union in
struct mt76_dev, so on USB and SDIO these read unrelated data from the
usb/sdio struct, which is non-NULL in practice.
mt76_npu_device_active() then returns true on USB, and
mt76_rx_poll_complete() takes the offload path and skips
mt76_rx_aggr_reorder(). RX A-MPDU subframes are delivered out of order and
the peer's TCP stack treats that as loss: heavy retransmissions and reduced
throughput in AP mode. Seen on mt7921u, mt7925u, mt76x2u and mt76x0u.
Gate both helpers on mt76_is_mmio() so they only run for the bus type that
owns the mmio union member.
Fixes: 7fb554b1b623 ("wifi: mt76: Introduce the NPU generic layer") Cc: stable@vger.kernel.org Tested-by: Nick Morrow <morrownr@gmail.com> Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca> Link: https://patch.msgid.link/20260720232640.41293-1-lucid_duck@justthetip.ca Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
EPP 0 is the only supported value in the performance policy.
commit 798c47593cca ("cpufreq/amd-pstate: Add support for platform profile
class") changed this while adding platform profile support to the
dynamic EPP feature, but this actually wasn't necessary since platform
profile writes disable manual EPP writes.
Restore allowing writing EPP of 0 when in performance mode.
Reviewed-by: Marco Scardovi <scardracs@disroot.org> Tested-by: Marco Scardovi <scardracs@disroot.org> Reported-by: Stuart Meckle <stuartmeckle@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221473 Closes: https://gitlab.freedesktop.org/upower/power-profiles-daemon/-/work_items/190 Fixes: 798c47593cca ("cpufreq/amd-pstate: Add support for platform profile class") Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dynamic EPP feature uses power_supply_reg_notifier() and
power_supply_unreg_notifier() but doesn't declare a dependency on
POWER_SUPPLY, causing linker errors when POWER_SUPPLY is not enabled.
Add POWER_SUPPLY to the selects.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com> Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202604040742.ySEdkuAa-lkp@intel.com/ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20260407194949.310114-1-mario.limonciello@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hits the WARN_ON_ONCE() in static_key_disable_cpuslocked() and hangs the
system since both sysfs writes are trying to do
amd_pstate_change_driver_mode() without any synchronization.
Grab the "amd_pstate_driver_lock" mutex when modifying "dynamic_epp" to
prevent the two paths from racing with each other. Add a lockdep
assertion for "amd_pstate_driver_lock" in
amd_pstate_change_driver_mode() to formalize the dependency.
Since "cppc_mode" is stable under "amd_pstate_driver_lock", only reload
the driver when in "AMD_PSTATE_ACTIVE" mode and reject all writes when
in passive or guided mode, or if the driver is not loaded, since only
active mode operates on EPP.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-2-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Failure to allocate profile name will return -EINVAL from
platform_profile_register() while in fact, it is a failure to allocate
memory for the profile_name string.
Return -ENOMEM when kasprintf() fails to allocate profile_name string.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-3-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
An active power supply notifier can race with amd_pstate_epp_cpu_exit()
trying to reset the floor perf and can overwrite the floor perf set in
MSR_AMD_CPPC_REQ.
Unregister the notifier before setting the floor perf to prevent the
rare race.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20260508051748.10484-5-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
cpufreq_cpu_get() returns NULL when no cpufreq policy is associated with
the requested CPU, for example because the CPU is offline or the policy
has already been torn down. Both amd_pstate_power_supply_notifier() and
amd_pstate_profile_set() acquire a policy via cpufreq_cpu_get() and then
pass that pointer to amd_pstate_get_balanced_epp() and
amd_pstate_set_epp(), which dereference it unconditionally. A racing
CPU hotplug or driver teardown can therefore lead to a NULL pointer
dereference on either of these dynamic EPP paths.
The third cpufreq_cpu_get() caller in this file, amd_pstate_verify(),
already handles the NULL case. Bring the two new callers in line with
that pattern: return NOTIFY_OK from the power-supply notifier (matching
the other "nothing to do" exits) and -ENODEV from amd_pstate_profile_set()
(the usual cpufreq error for a missing CPU policy).
Found by code inspection; not tested on hardware.
Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Fixes: 798c47593cca ("cpufreq/amd-pstate: Add support for platform profile class") Signed-off-by: EDAMAMEX <edame8080@gmail.com> Link: https://lore.kernel.org/r/20260520070211.2753183-1-edame8080@gmail.com Signed-off-by: Mario Limonciello <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The typec_altmode structure contains a 'struct device' object
that cannot be allocated on the stack because of its size, even
when ignoring the lifetime rules:
If no_console_suspend is specified, on suspend the 8250 console driver
uses a scratch register (UART_SCR) to store a special canary value. This
is used during the resume path to identify a printk() call before the
driver's own ->resume() callback. In this case,
serial8250_console_restore() is called to quickly re-init the 8250 for
console printing.
See commit 4516d50aabed ("serial: 8250: Use canary to restart console after
suspend") for the original motivation.
Unfortunately, this canary workaround does not work in all cases (such as
suspend to mem) because the scratch register will not reset. This has not
been a real issue until now because it could simply lead to some garbage
characters upon resume. However, with the introduction of console flow
control it becomes a real problem because a failed suspend/resume detection
when flow control is enabled leads to all characters hitting the flow
control timeout.
Workaround this issue by temporarily ignoring console flow control when
the debug canary suspend/resume detection is active.
Fixes: 5e6dfb87b191 ("serial: 8250: Add support for console flow control") Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://patch.msgid.link/20260707141032.5074-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 lg-laptop driver.
Fixes: 2d9cb20610f7 ("platform/x86: lg-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/3706551.iIbC2pHGDl@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure the perf.data output when checking permissions is written to
/dev/null so that it isn't left in the directory the test is run.
Fixes: b58261584d2f ("perf test kvm: Add some basic perf kvm test coverage") Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tracing_max_latency shouldn't be limited if CONFIG_FSNOTIFY is defined
or not and it was moved out of that protection to be always available with
CONFIG_TRACER_MAX_TRACE. All was moved out except the dentry descriptor
for it (d_max_latency) and it failed to build on some configs.
Move that out of the CONFIG_FSNOTIFY protection too.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260209194631.788bfc85@fedora Fixes: ba73713da50e ("tracing: Clean up use of trace_create_maxlat_file()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602092133.fTdojd95-lkp@intel.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
They are partially incorrect since "software" engine does not mean
hamming, the "none" cae is also falling into this print, and on-die
means there is some kind of hardware support; we prefer to use the
wording on-host vs. on-die.
Since commit 68c5c42567bc ("dm-integrity: replace forgeable discard
filler with a keyed sector marker"), integrity_metadata computes a
checksum for every discarded block into the "checksums" buffer.
integrity_sector_checksum always writes the whole digest. So if the tag
size is smaller than the digest size, the checksum of the last block
that fits into the buffer is written past the end of it. For example,
with hmac(sha256) and tag size 16, a 4MiB discard writes 16 bytes past
the kmalloc'ed page.
Fix this by subtracting extra_space from the buffer size when computing
max_blocks, like we do for writes.
Fixes: 68c5c42567bc ("dm-integrity: replace forgeable discard filler with a keyed sector marker") Reviewed-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev> Signed-off-by: Ben Cressey <ben@cressey.dev> Assisted-by: Claude:unspecified Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
htb_classify() follows each filter-selected inner class by switching
to cl->filter_list, but never bounds the number of hops. A filter on
an inner class can point back to itself or to another inner class that
points back, creating an infinite loop in the packet classification
path with the qdisc lock held and BH disabled — a soft lockup / panic
from a single packet.
Bound the traversal with a hop counter and drop the packet with a
rate-limited warning once the bound is exceeded. The counter is
incremented at the point the inner filter chain is picked up, after the
TC_ACT_* switch has consumed the classifier verdict, so a terminal
TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr
to __NET_XMIT_STOLEN and the packet is not charged as a drop by this
qdisc or its parent.
The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than
from the qdisc hierarchy depth limit. Class levels run from 0 to
TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can
take at most TC_HTB_MAXDEPTH hops. That descent is what a sane
configuration does, but it is assumed here rather than enforced:
htb_find() resolves a classid against every class in the qdisc, so a
filter may equally select a sibling or an ancestor. The normal
root -> inner -> leaf path takes a single hop, so the bound does not
affect legitimate classification.
htb_classify() can now return NULL irrespective of CONFIG_NET_CLS_ACT,
whereas previously every NULL return sat inside that ifdef. The NULL
handler in htb_enqueue() therefore cannot stay conditional either, so
drop the ifdef around it. This matches hfsc_enqueue(), which has always
handled a NULL class unconditionally. Without it, a kernel built
without actions would dereference a NULL class instead of dropping.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HTB, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Create an HTB qdisc on a device (e.g. lo), add an inner class
1:1 with a leaf child 1:10, install a root u32 filter selecting
1:1, and an inner-class u32 filter on 1:1 also selecting 1:1.
- Send one packet (ping). On the unfixed kernel the classify loop
spins with the qdisc lock held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Vega <vega@nebusec.ai> Co-developed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260826143339.271935-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The retransmit path has no such guard. __tcp_retransmit_skb() builds a
segs > 1 skb and hands it to the GSO layer, which only advances th->seq
per segment and copies urg_ptr verbatim:
/* __tcp_retransmit_skb() */
len = cur_mss * segs; /* segs > 1, no urg_mode check */
...
/* tcp_gso_segment(): bumps seq only, urg_ptr is copied */
urg_ptr is an offset from the segment's own seq, so a copied value points
at a different place on each segment. The receiver rebuilds the absolute
urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead
of the one OOB byte:
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci.
fec_ptp_init() is only called when fep->bufdesc_ex is available.
However, fec_probe() unconditionally calls fec_ptp_stop() on the
failed_init path, and fec_drv_remove() unconditionally calls
fec_ptp_stop() during device removal.
Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths
to avoid stopping PTP when it was not initialized.
Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path") Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260826103428.32807-1-phucduc.bui@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read
in slip_receive_buf() when racing against tty hangup.
tty_ldisc_hangup() calls ld->ops->hangup() while holding only
a read lock on tty->ldisc_sem (via tty_ldisc_ref()).
Because slip_hangup() simply called slip_close(), it ran concurrently
with reader functions such as slip_receive_buf().
slip_close() unregisters and frees the net device and its private
struct slip, causing concurrent reader threads in slip_receive_buf()
to dereference freed memory.
Line discipline close() is already guaranteed to be called under
the write lock of tty->ldisc_sem during hangup processing
(in tty_ldisc_reinit() or tty_ldisc_kill()).
Remove slip_hangup() so teardown is serialized cleanly by slip_close().
Fixes: 5342b77c4123 ("slip: Clean up create and destroy") Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr> Reported-by: Eulgyu Kim <eulgyukim@snu.ac.kr> Closes: https://lore.kernel.org/netdev/20260825150655.1450271-1-jjy600901@snu.ac.kr/ Cc: Qingfang Deng <qingfang.deng@linux.dev> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260826105238.3323436-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
qdisc_get_stab() accepts a user-supplied size table, and
__qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the
overhead, the size-table data (u16), and size_log (up to
STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len()
to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as
DRR and ETS replenish one quantum per loop iteration; with a tiny
quantum (1) they spin billions of times under the qdisc lock,
producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai.
Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table
amplification cannot drive deficit schedulers into an unbounded loop.
A legitimate size table (e.g. qfq's overhead 999999999, which is
handled by dropping) is still accepted.
Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above
any legitimate single-skb wire length: the largest current skb->len
is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax)
amplifies that to ~578 KB, both comfortably below 1 MiB. At the same
time, 1 MiB bounds the deficit refill loop to ~1M iterations per
packet with quantum=1, which completes in a few milliseconds well
under the demonstrated softlockup threshold (~10^9 iterations).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y).
- Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that
amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]).
- Add a class with a tiny quantum of 1 and send one small packet; the
deficit loop spins billions of times under the qdisc lock and trips
the softlockup detector (panic with kernel.softlockup_panic=1).
- Reachable as root or from an unprivileged user in a fresh user+net
namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260825081403.133992-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068e59020a0e28dc010e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for.
Fixes: df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX path") Cc: Daniel Baldin <DBaldin@dspace.de> Signed-off-by: Pascal Kneuper <PKneuper@dspace.de> Link: https://patch.msgid.link/20260824125014.47862-1-PKneuper@dspace.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On dwmac, one of the Unicast filter entries is used to store the local
HW addr. This means that we have to use promisc mode for any kind of
unicast filtering if we only have one slot in our unicast filter.
The number of slots available depends on how the IP is integrated, and
we can't autodiscover how many of these slots we have available, so
the DT property snps,perfect-filter-entries can be used to specify how
many are available.
Most IP variants default to 1 if this isn't specified, which is the case
for the amlogic variants (in this case, S905X3).
The stmmac selftests for UC filtering look if we have enough slots in
the filter to store the dev->uc list, but doesn't account for the
device's own MAC address. The dev->uc list's size we get with
netdev_uc_count() also doesn't account for the HW addr.
As the selftest only requires one available slot, in the case of
single-slot platforms, that means we erroneously consider we have enough
room for the test, when we actually don't, and the filtering test fails.
Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260826140500.616466-6-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The same filter slots are used to store the main MAC address as well as
the address for the unicast filter. Let's account for that when deciding
whether or not to use promisc when programming the UC list in hardware.
Fixes: 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260826140500.616466-5-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The same filter slots are used to store the main MAC address as well as
the address for the unicast filter. Let's account for that when deciding
whether or not to use promisc when programming the UC list in hardware.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260826140500.616466-4-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The same filter slots are used to store the main MAC address as well as
the address for the unicast filter. Let's account for that when deciding
whether or not to use promisc when programming the UC list in hardware.
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260826140500.616466-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MMC counters report MAC statistics. Multiple counters can be
enabled when the IP is integrated, however there's no way to know
exactly which ones. Un-implemented counters seem to report 0.
It was found that on StarFive JH7110 and Amlogic SM1, the counter that's
used by the selftest (mmc_tx_framecount_g) isn't implemented, triggering
an MMC selftest failure.
Both the above SoCs seem to implement mmc_rx_framecount_gb, let's use
this counter as well for MMC counter validation.
Note that this doesn't guarantee that we won't encounter the same issue
again if another IP implements yet another set of counters that don't
include that new one.
If the game of whack-a-mole with implemented counters becomes too hard to
maintain, we may simply consider removing the MMC selftest entirely.
Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260826140500.616466-2-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver calls dma_set_coherent_mask() but never dma_set_mask(),
leaving the streaming DMA mask at the bus default. On the non-coherent
EN7581 platform (Cortex-A53), this causes the NPU mailbox to hang
after approximately 41 calls when using streaming DMA mappings.
Replace dma_set_coherent_mask() with dma_set_mask_and_coherent() to
set both the streaming and coherent DMA masks, matching standard
driver practice.
The MTE prctl test emits one result from check_basic_read() followed by
one result for each of the seven entries in mte_modes[]. However, the TAP
plan only accounts for the array entries, producing:
# Planned tests != run tests (7 != 8)
Include the basic read check in the plan so that all eight emitted results
are declared.
Reviewed-by: Mark Brown <broonie@kernel.org> Fixes: 1f488fb91378 ("kselftest/arm64/mte: Add MTE_STORE_ONLY testcases") Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MTE KSM test requires write access to KSM sysfs but does not check
that it is running as root. It also unconditionally saves, enables and
restores the merge_across_nodes attribute. The kernel only creates this
attribute when CONFIG_NUMA=y, so a non-NUMA kernel prints the following
message three times even though every KSM subtest passes:
Skip the test when it is not running as root. Check that the optional
attribute is readable and writable, treating ENOENT as its expected
absence on non-NUMA kernels and skipping the test for other access
failures. Only save, enable and restore the attribute when it is
available.
Check MTE availability before the privilege and sysfs checks so systems
without MTE retain the existing feature-unavailable skip result.
This preserves the existing behavior on NUMA kernels without requiring
NUMA or reducing KSM coverage on single-node systems.
Fixes: f981d8fa2646 ("kselftest/arm64: Verify KSM page merge for MTE pages") Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Most MTE tests set a TAP plan and emit results without first printing
the TAP version header. Direct execution therefore starts with a plan
such as "1..20" instead of "TAP version 13".
The problem is particularly visible in the GCR_EL1 context-switch test.
It prints its plan before forking 1,024 child processes. When stdout is
fully buffered, the plan remains in the stdio buffer. Each child inherits
the pending "1..1" line and flushes its copy from exit(), producing
repeated plan lines.
ksft_print_header() prints the TAP header and enables line buffering.
Call it in every MTE test that is missing it. In the GCR_EL1 test, call
it before the plan so the plan is flushed before the children are
forked. In the remaining tests, call it before setup and prerequisite
checks so early failures and whole-test skips also retain the header.
Fixes: 29f080881601 ("kselftest/arm64: check GCR_EL1 after context switch") Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kcontrol LED state layer tries to track the all associated
kcontrol elements with naive assumptions that they are readable.
But one can create a write-only element that has no get callback (even
a user element can do it), and this may lead to a NULL dereference at
the call chain of snd_ctl_led_notify(), as found by syzkaller.
For avoiding the Oops, add a sanity check of the kcontrol's info and
get callbacks, and just skip the invalid kcontrols before assigning
the kctl to the LED layer.
Reported-by: syzbot+b7fe2760ea6f1ee44b4d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6a9007b3.1d9ded08.62e62.00cd.GAE@google.com Fixes: 22d8de62f11b ("ALSA: control - add generic LED trigger module as the new control layer") Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260827113951.893291-1-tiwai@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
Add pr_fmt to prefix log messages with the module name for
easier debugging in dmesg.
Add checkentry functions for IPv4 (ttl_mt_check) and IPv6
(hl_mt6_check) to validate the match mode at rule registration
time, rejecting invalid modes with -EINVAL.
The evaluation function returns false in case the mode is
unknown, so this is a cleanup, not a bug fix.
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ.
The user can specify any gso_size in a packet crafted with an AF_PACKET
PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the
same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user
crafts a packet with gso_size < 8, there is a risk for partial GSO to
overflow the 16-bit gso_segs field when dividing the SKB length by
gso_size.
Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep
gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly
tested at tools/testing/selftests/net/tun.c:649.
Fixes: 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") Signed-off-by: Alice Mikityanska <alice@isovalent.com> Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260822120117.1163423-2-alice.kernel@fastmail.im Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The stmmac TC filtering rules have recently gained sanity checks to make
sure the passed keys and their respective masks are aligned with the HW
filtering abilities.
The stmmac selftests failed to pass the mask in the match data for L4
filtering tests, and are now failing consistently with -EINVAL :
$ ethtool -t eth1
[...]
23. L4 DA TCP Filtering -22
24. L4 SA TCP Filtering -22
25. L4 DA UDP Filtering -22
26. L4 SA UDP Filtering -22
Let's pass the ip_proto mask in the l4 filtering tests match data. Found
on imx8mp, which now have passing L4 tests :
$ ethtool -t eth1
[...]
23. L4 DA TCP Filtering 0
24. L4 SA TCP Filtering 0
25. L4 DA UDP Filtering 0
26. L4 SA UDP Filtering 0
While at it, initialize the masks and keys to avoid re-using whatever
was on the stack.
Fixes: 5536d7c84363 ("net: stmmac: fix l3l4 filter rejecting unsupported offload requests") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260825211748.360935-1-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The macros TXGBE_INTR_MISC() and WX_INTR_Q() rely on the standard BIT()
macro to generate interrupt masks based on the queue vector index.
On 32-bit architectures, BIT() evaluates to a 32-bit `unsigned long`.
Since the number of queue vectors can be up to 63 on txgbe devices,
performing a left shift of 32 or more results in an integer overflow
and undefined behavior. This causes incorrect interrupt masking and
unmasking logic for both the queue and miscellaneous interrupts on
32-bit systems.
Fix this by replacing BIT() with BIT_ULL() in these macros. This
ensures that the bitwise shift is always performed safely on a 64-bit
`unsigned long long` type, regardless of the underlying architecture.
Fixes: e37546ad1f9b ("net: wangxun: revert the adjustment of the IRQ vector sequence") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/45F5565CE6AC4329+20260824072119.48399-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
IPPROTO_SMC sockets create an internal TCP sock ("clcsock") from the
proto->init hook. When socket creation fails after proto->init has
run - e.g. a cgroup BPF program attached to BPF_CGROUP_INET_SOCK_CREATE
denies the socket - sk_common_release() only invokes sk_prot->destroy
if it is set, but neither smc_inet_prot nor smc_inet6_prot defines it,
and smc_destruct() returns early unless sk_state is SMC_CLOSED. As a
result, every failing socket(AF_INET, SOCK_STREAM, IPPROTO_SMC) call
leaks one tcp_sock, so an unprivileged task able to attach a deny-all
BPF_CGROUP_INET_SOCK_CREATE program to its own cgroup can grow kernel
memory unboundedly.
Add a .destroy hook to both protos that releases the clcsock via
smc_clcsock_release(). smc_sk_init() hashes the sock into the smc
hashinfo before the clcsock is created, and smc_diag dumps walk that
hash dereferencing smc->clcsock without taking clcsock_release_lock,
while sk_common_release() calls .destroy before .unhash. Unhash the
sock before releasing the clcsock, as __smc_release() does, so a
concurrent dump cannot observe the release; the second unhash in
sk_common_release() is a no-op.
ftrace_direct_multi_init() assigns kthread_run()'s return value to
simple_tsk without an IS_ERR() check. When kthread_run() fails it
returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads
with simple_tsk holding an error pointer. On unload,
ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(),
leading to a null-pointer-dereference.
Check the return value of kthread_run() with IS_ERR(); on failure,
unregister the ftrace direct call and propagate the error code.
Link: https://patch.msgid.link/20260826015050.10772-1-vulab@iscas.ac.cn Fixes: e1067a07cfbc ("ftrace/samples: Add module to test multi direct modify interface") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ftrace_direct_init() assigns kthread_run()'s return value to simple_tsk
without an IS_ERR() check. When kthread_run() fails it returns
ERR_PTR(-ENOMEM), but init still returns 0, so the module loads with
simple_tsk holding an error pointer. On unload, ftrace_direct_exit()
then passes that ERR_PTR to kthread_stop(), leading to a
null-pointer-dereference.
Check the return value of kthread_run() with IS_ERR(); on failure,
unregister the ftrace direct call and propagate the error code.
Link: https://patch.msgid.link/20260826015034.10755-1-vulab@iscas.ac.cn Fixes: ae0cc3b7e7f5 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When parsing the Ceph messenger v2 protocol banner, the `payload_len` field
is decoded from the banner prefix. If a client sends a banner with a
`payload_len` of 0, the kernel sets up a 0-length socket read. This
violates an invariant in the state machine, triggering a warning in
`populate_in_iter()`:
According to the msgr2 protocol specification, the banner payload is
expected to contain at least two 64-bit integers (`server_feat` and
`server_req_feat`). Therefore, `payload_len` must be at least 16 bytes.
Fix this by adding a check in `process_banner_prefix()` to reject a
`payload_len` smaller than 16 bytes. This prevents the 0-length read and
correctly aborts the connection with a protocol error.
For O_APPEND writes, ki_pos is set to the current EOF via
generic_write_checks() after fetching i_size from the MDS. However,
ceph_get_caps() may need to wait for Fwx exclusive caps if the write
extends the file (endoff > i_max_size). While waiting for Fwx, the
previous Fwx holder (another client) may have already extended the
file. When the MDS grants us Fwx, the cap grant message updates the
local i_size, but ki_pos remains at the old EOF, causing the append
write to land at a stale offset and overwrite data from the other
client.
Fix by re-reading i_size_read(inode) after ceph_get_caps() returns.
At this point we hold Fwx exclusive caps, no other client can modify
the file, and i_size reflects the true EOF from the MDS cap grant.
No extra MDS round-trip is needed. Only adjust ki_pos when the EOF
has actually changed.
After adjusting ki_pos forward, the write range [pos, pos+count) may
now exceed the i_max_size that was validated by ceph_get_caps() for
the old range. Re-check against i_max_size and truncate the write
if necessary to stay within the MDS-granted limit.
Link: https://tracker.ceph.com/issues/7333 Fixes: 8e4473bb50a1 ("ceph: do not execute direct write in parallel if O_APPEND is specified") Signed-off-by: Xiubo Li <xiubo.li@clyso.com> Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The snd_soc_dapm_put_enum_double() rejects item[0] once it reaches
e->items, but it lets item[1] be equal to it. Both go on to
snd_soc_enum_item_to_val(), which indexes e->values with no bound of
its own, so an enum with a value table reads one element past the end.
The indexing arrived with the MUX consolidation, which relaxed the
item[1] check in the same hunk. The value MUX handler it deleted used
>= there, and the snd_soc_put_enum_double() in soc-ops.c still does.
Only adav80x pairs a value table with two shifts, and its second
channel looks accidental, but the control does report two values.
Writing three into it reads off the end of adav80x_mux_values. The
core catches that only under CONFIG_SND_CTL_INPUT_VALIDATION, which
defaults off.
Fixes: 3727b4968453 ("ASoC: dapm: Consolidate MUXs and value MUXs") Assisted-by: Claude:claude-opus-5 Signed-off-by: HyeongJun An <sammiee5311@gmail.com> Link: https://patch.msgid.link/20260825125745.932832-1-sammiee5311@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
strcpy() is deprecated and sprintf() does not perform bounds checking
either. Although an overflow is unlikely, it's better to proactively
avoid it by using the safer strscpy() and scnprintf(), respectively.
Additionally, unify memory allocation for 'hname' to simplify and
improve aa_policy_init().
Closes: https://github.com/KSPP/linux/issues/88 Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: 3daad923a868 ("apparmor: policy_int make sure list heads are initialized before fail path") Signed-off-by: Sasha Levin <sashal@kernel.org>
ACOMP_REQUEST_ON_STACK() reserves only enough storage for the
synchronous fallback. When an async implementation is selected, callers
clone that stack request before retrying, but acomp_request_clone()
currently copies only the stack-sized object. The clone therefore has no
storage for the async provider request context, and providers such as QAT
write past the allocation through acomp_request_ctx(). KASAN does report
a slab OOB write.
Allocate a zeroed clone large enough for the runtime acomp request size,
copy only the bytes present in the source object, and preserve the
existing fallback-on-allocation-failure behavior. Use the runtime reqsize
because an implementation may adjust it during tfm initialization.
check_locality() treats every nonzero transport return as success. SPI
errors remain negative, while the I2C path can convert a negative write
error through its byte-sized status variable. Either result is nonzero
even though the TPM_ACCESS byte can remain unwritten, so indeterminate
ACTIVE_LOCALITY and VALID bits can falsely report an active locality.
Require recv() to return exactly the requested byte before examining
TPM_ACCESS. Transport errors and short reads now report an inactive
locality, while successful reads retain the existing behavior.
This issue was found by a static analysis checker and confirmed by manual
source review.
Fixes: 251a7b08213a ("TPM: STMicroelectronics ST33 I2C KERNEL 3.x") Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com> Link: https://lore.kernel.org/r/20260813153032.3951878-2-ruoyuw560@gmail.com Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
st33zp24_status() ignores the result of the transport read and returns
data even when no byte was received. The I2C transport, for example,
skips i2c_master_recv() when the register-select write is short or fails,
leaving data uninitialized. The resulting stack value can be interpreted
as TPM_STS flags and let status checks complete spuriously.
The status callback cannot propagate a transport error. Return zero
unless recv() reports exactly one byte. With no status bits set, callers
retry or take their existing timeout or error path instead of acting on
an invalid status value.
This issue was found by a static analysis checker and confirmed by manual
source review.
Fixes: 251a7b08213a ("TPM: STMicroelectronics ST33 I2C KERNEL 3.x") Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com> Link: https://lore.kernel.org/r/20260813153032.3951878-1-ruoyuw560@gmail.com Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
teql_master_xmit() sets skb->dev = slave before calling the slave's
ndo_start_xmit(), but never restores it when that transmit fails. The
skb then walks on to the next slave still pointing at the previous one.
If a later slave has no resolved neighbour, teql_resolve() hands the skb
to neigh_event_send(), which queues it on that neighbour's arp_queue
with the stale skb->dev. skb->dev holds no reference, so deleting the
previous slave frees the net_device while the skb is still queued.
Whatever runs next on that skb - arp_error_report() on timeout, or
neigh_direct_output() -> dev_queue_xmit() once the neighbour resolves -
causes a UAF like the one below:
sfq_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) (unsigned). A
device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, so slot->allot = INT_MIN
and INT_MIN + INT_MIN toggles between INT_MIN and 0 forever, spinning
sfq_dequeue() under the qdisc lock.
Clamp the quantum to [256, 1 << 20] so the refill loop terminates. The
lower bound also covers q->quantum == 0 (psched_mtu() returning 0),
which spins sfq_dequeue() identically. sfq_change() already rejects a
negative quantum, so only the init path was exposed.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260822195509.112717-7-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow
check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting
MTU 2147483634) makes weight * quantum overflow the signed deficit in
hhf_dequeue(), spinning forever.
Clamp q->quantum before hhf_change() so both the opt and !opt paths see
a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with
a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option
present) fails with -EINVAL because hhf_change() re-validates the
unclamped default (sch_hhf.c:559). 256 matches fq_codel's floor and is
a sane minimum for a DRR quantum.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace.
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260822195509.112717-6-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fq_pie_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_pie_qdisc_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_pie_policy which
is already bounded to [1, 1 << 20]; clamp the default to [256, 1 << 20].
256 matches fq_codel's floor and is a sane minimum for a DRR quantum.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace.
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260822195509.112717-5-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
codel_init() sets q->params.mtu = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000. In
codel_should_drop() the test "*backlog <= params->mtu" then compares
the backlog against ~2 GiB; with the default sch->limit of
DEFAULT_CODEL_LIMIT (1000) packets the backlog can never reach it, so
the test is always true and CoDel is silently and completely disabled
i.e no drops, no ECN marking, codel degrades to a tail-drop FIFO.
codel_change() never updates params.mtu, so the init path is the only
place to clamp it. Constrain to [256, 1 << 20], matching the fq_codel
bound; 256 is a sane floor that only makes CoDel slightly more willing
to act on very small queues, which is the safe direction.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace.
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260822195509.112717-4-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace.
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260822195509.112717-3-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux / log