Keith Busch [Wed, 19 Aug 2026 15:49:37 +0000 (08:49 -0700)]
block: save page offset gaps in cloned bio
The cloned bio needs to inherit the accumulated gaps between vectors so
that we can know if this bio can subscribe to the iova coalescing
optimization.
When cloning for a split, the gap only applies to the front bio since
that's as far as has been processed. The remaining bio can reset its
gaps to 0 since it advanced past the checked vectors, and will start its
accounting from there on the next split check.
Fixes: 2f6b2565d43c ("block: accumulate memory segment gaps per bio") Reported-by: Eric Auger <eauger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260819154937.3903312-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Mon, 31 Aug 2026 02:50:50 +0000 (11:50 +0900)]
block: flag zoned disks with GENHD_FL_NO_PART
Zoned block devices do not support partitions. However, the partition
table is nevertheless still inspected, and any partition found ignored
with a warning in add_partition(). While this is generally not a problem,
and in fact beneficial to the user as it indicates an invalid use of a
zoned block device, scanning for a partition table on the device may
result in issuing read operations to offline zones (e.g. after a disk head
is depopulated for disks that support head management operations).
Since partitions are ignored anyway, completely disable partition scanning
for zoned gendisks by setting the flag GENHD_FL_NO_PART in __add_disk().
The existing check in add_partition() is left as-is to ensure that we
still get a warning if for whatever reason, despite GENHD_FL_NO_PART, we
still endup trying to add partitions.
Flagging zoned disks with GENHD_FL_NO_PART also has the benefit to expose
through sysfs the ext_range attribute with the value of 1 instead of the
default DISK_MAX_PARTS, thus correctly advertizing the fact that zoned
disks do not support partitions.
Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://patch.msgid.link/20260831025050.667758-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 30 Aug 2026 17:42:40 +0000 (10:42 -0700)]
Merge tag 'cocci-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull Coccinelle updates from Julia Lawall:
- Clean up a number of the semantic patches in the scripts/coccinelle
directory, particularly with respect to functions that no longer
exist in the kernel (Sang-Heon Jeon)
He and I have also done some reorganizations that improve
performance.
- Eliminate some false positives (me)
- Fix an out of date URL (相浦彰)
* tag 'cocci-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: ifnulldev_put: update error message
coccinelle: ifnulldev_put: update outdated helper names
coccinelle: atomic_as_refcounter: drop atomic_long_dec_and_lock
coccinelle: kfree_mismatch: drop vmalloc_exec
coccinelle: pool_zalloc-simple: drop the pci_pool_alloc rules
coccinelle: zalloc-simple: drop the kmem_alloc rules
coccinelle: alloc_cast: drop removed allocators
coccinelle: remove obsolete pci_free_consistent.cocci
scripts: coccinelle: devm_free: reduce false positives
coccinelle: misc: struct_size: drop unneeded parentheses
coccinelle: mini_lock: improve performance when searching loops
coccinelle: api: check for macro context
coccinelle: update Coccinelle website URL
coccinelle: misc: minmax: avoid unhelpful isomorphisms
coccinelle: misc: minmax: check for the presence of if cases
coccinelle: misc: minmax: drop unneeded parentheses
coccinelle: misc: minmax: improve performance when no candidate exists
coccinelle: double_lock: improve performance when no double lock exists
Darrick J. Wong [Fri, 28 Aug 2026 16:15:01 +0000 (09:15 -0700)]
CREDITS/mailmap: add some info about Darrick J. Wong
Add myself to CREDITS because apparently I've never done that; and
update mailmap so that all my old email addresses get remapped to the
kernel.org redirector.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 30 Aug 2026 16:57:35 +0000 (09:57 -0700)]
Merge tag 'locking-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
- Revert a commit to spinlock cleanup guards that got caught up
in the subtle limitations & fragility of guards (again...) and
caused a regression (Peter Zijlstra)
* tag 'locking-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Revert switching guards to _irq_{disable,enable}()
Linus Torvalds [Sun, 30 Aug 2026 16:47:39 +0000 (09:47 -0700)]
Merge tag 'rust-fixes-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix KCFI failures, such as in Rust doctests, by disabling function
merging when CFI is enabled. Gary reported the LLVM bug to upstream
and it is now fixed in their mainline.
- Fix 'objtool' fallthrough warnings under the experimental
'CONFIG_RUST_INLINE_HELPERS' by passing (for the combined Rust and
helpers code) the LLVM options needed to preserve the unreachable
traps that 'rustc' normally emits.
In addition, fix 'objtool' errors when LTO is enabled on top, by
also filtering out the LTO flags (for the combined Rust and helpers
code) so that the traps are kept in place.
- Fix 'objtool' warnings by adding one more 'noreturn' function.
- Fix 'make rusttest' target when the 'rustc-dev' component is
installed and Rust >= 1.82.0, <= 1.87.0 is used.
'kernel' crate:
- 'num' module: fix soundness issue in the 'Bounded' conversion from
'bool' by restricting the conversions to unsigned 'Bounded'.
- 'jump_label' module: fix future 'make rusttest' target failures
when 'ARCH=' is set to an arch different than the host's.
* tag 'rust-fixes-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: disambiguate `zerocopy_derive` for `rusttest`
rust: num: restrict bool conversion to unsigned Bounded
kbuild: rust: keep Rust objects out of Clang LTO with inline helpers
kbuild: rust: preserve unreachable traps with inline helpers
rust: cfi: disable function merging if CFI is enabled
rust: jump_label: skip arch-specific asm in `testlib` builds
objtool/rust: add one more `noreturn` Rust function
rust: kernel: list: fix incorrect pop_back example comment
Linus Torvalds [Sun, 30 Aug 2026 16:43:01 +0000 (09:43 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull arm updates from Russell King:
"Updates for 7.3:
- add module description for kprobes testing module
- remove references to CONFIG_CPU_ARM92x_CPU_IDLE options
- expand comment in ARM's __switch_to()
Also a number of fixes that missed 7.2:
- disable broken eBPF on RiscPC
- more BKPT fixes (guys, it's a *very* bad idea when everyone uses
the BKPT instruction for their own differing purposes)
- another preempt-rt fix, this time for siglock / CPU timers
- fix another path where we try to send signals to processes with
interrupts disabled
- acquire mmap write lock for show_pte() with user faults"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9480/1: entry: expand comment in __switch_to
ARM: 9478/1: Remove references to removed CONFIG_CPU_ARM92x_CPU_IDLE options
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
ARM: 9481/2: breakpoint: CFI breakpoints only on demand
ARM: 9477/1: Disable broken eBPF JIT on the Risc PC
ARM: 9473/1: kprobes: test: add MODULE_DESCRIPTION
Linus Torvalds [Sun, 30 Aug 2026 16:26:54 +0000 (09:26 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"One small trivial macro cleanup and one bug fix.
The bug fix is to fix an unchecked access in our or1k_atomic syscall,
I am debating if we should just deprecate this as there is minimal
need for it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
openrisc: drop unneeded semicolon
Linus Torvalds [Sun, 30 Aug 2026 16:22:00 +0000 (09:22 -0700)]
Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out
the name of the instance that failed, it prints "(null)". That is
because it prints "cur_str" that had already been processed by
strsep(). Print the saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events.
But if the named histogram has a variable attached, the second event
that uses the named histogram which duplicates it and needs to free
the original after duplication leaves the old variable in place and
still visible. If another histogram uses than variable, it will use
the stale one which will try to reference the freed duplicate
histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram
data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check
if it succeeded in creating a kthread. If the kthread creation were
to fail, the code will still try to call kthread_stop() on the error
returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update
the ring buffer sub-buffer size, can cause the trace_pipe read to
read stale data. Add trace_access_lock() around updating the ring
buffer sub-buffer size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which
calls free_ei(). The free_ei() will test if eventfs_inode being freed
has no children. It is a bug if it does. But on the failure case of
the creation of the "events" directory, the children lists have not
yet been initialized and the free will trigger a warning because
list_empty() on an uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and
makes sure that a created eventfs_inode has its lists initialized
upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does
not test the return of kthread_run() to see if it succeeds. Return a
failure if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state.
It makes a copy of it then updates the child's pointer to it. But if
the allocation fails, the duplication function leaves the child with
a pointer to its parent's descriptor. When the child cleans up its
data, it will free the parent's descriptor while the parent is still
using it.
In the duplication function, set the child's user_event_mm to NULL
before testing if the allocation succeeded, and when it exits it will
not free the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a
failed replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and
exits with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it
triggers a WARN_ON_ONCE() and continues normally. Instead, have it
exit with an error and a pr_warn() print instead of a full WARNING.
* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Stop remote reader update when page swap fails
tracing: Fix retry exhaustion in simple ring buffer reader swap
tracing/user_events: Clear copied tracing state before fork duplication
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
eventfs: Initialize ei->children and ei->list in init_ei()
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
tracing: Fix crash passing ERR_PTR to kthread_stop()
tracing: Fix use-after-free with same-name named triggers
tracing: Fix logged instance name on creation failure
Linus Torvalds [Sat, 29 Aug 2026 18:55:36 +0000 (11:55 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi
Pull more SCSI updates from Martin Petersen:
"Remaining updates for the 7.3 merge window. The only core change is
enabling context analysis for the SCSI layer and UFS.
The remaining changes are either bug fixes or hardening"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: (26 commits)
scsi: snic: Fix SCSI host leak on workqueue allocation failure
scsi: MAINTAINERS: Update my email address
scsi: MAINTAINERS: Leave the cumana_1 and oak drivers to the RISCPC maintainers
scsi: leapraid: Standardize NCQ priority sysfs attributes
scsi: leapraid: Serialize firmware log mmap with teardown
scsi: leapraid: Balance host references for firmware log VMAs
scsi: lpfc: Remove unnnecessary NULL check
scsi: qla2xxx: Fix an loop timeout test
scsi: qla2xxx: Fix an error code in qla_get_tmf()
scsi: ibmvfc: Fix use of uninitialized rport in ibmvfc_do_work()
scsi: core: Enable context analysis for hosts.o
scsi: lpfc: Replace strlcat() with sysfs_emit_at() in the sysfs show functions
scsi: lpfc: Replace strlcat() with seq_buf in the debugfs dump helpers
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_rx_monitor_report()
scsi: lpfc: Replace strlcat() with scnprintf() in lpfc_vport_symbolic_node_name()
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_info()
scsi: core: Enable context analysis
scsi: core: Protect host state changes with the host lock
scsi: core: Add lock context annotations
scsi: core: Pass the SCSI host pointer directly to scanning functions
...
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.
Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.
[shorne@gmail.com: fix comment style] Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Cc: stable@vger.kernel.org Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
Linus Torvalds [Fri, 28 Aug 2026 23:51:14 +0000 (16:51 -0700)]
Merge tag 'io_uring-7.3-20260828' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
"A few smaller fixes for io_uring that should go into the 7.3-rc1
kernel, all three headed to stable as well. This contains:
- A few fixes around cancellation and teardown for waitid
- Cap the user size for the query interface copy-out"
* tag 'io_uring-7.3-20260828' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/waitid: avoid siginfo copy during ring teardown
io_uring/waitid: honor task_work cancellation
io_uring/query: cap user size passed to copy_struct_to_user
Linus Torvalds [Fri, 28 Aug 2026 23:37:55 +0000 (16:37 -0700)]
Merge tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm updates from Dave Airlie:
"As mentioned last week, an msm pull request fell down the side of the
couch or whatever the email equivalent of that is. This has the msm
next stuff + the usual fixes for amd/intel.
core:
- use drm_warn instead of warn
msm:
- Bindings:
- Added Shikra support
- Document a840, a704, a722
- Core:
- Use drm_client buffers for fbdev emulation
- teardown fixes
- ARM32 DMA fixup
- Remove objects from evict list when re-validated
- Bunch of corner case and error path fixes
- DPU:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Fixed SSPP offsets of Kaanapali
- DP:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Cleaned up core code in preparation for MST support
- Fixed prepare() to let Pipewire continue in case of the unplugged cable
- GPU:
- Add support for a704
- Add support for a722
- HDMI:
- Simplifed register access
amdkfd:
- Fix return value
- CU occupancy for GFX 11
- CU occupancy for GFX 12/12.1
- Queue bounds checking fix
- SVM fixes
- CRIU bounds checking fix
radeon:
- iMac display fix
xe:
- error message cleanups
- i2c global register definitions as dependency for xe/i2c fixes
- Media workardound
- Add CCS to gt_idle debugfs print
- Page fault related fix
- i2c related fixes
- System Controller mailbox bit fix"
* tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel: (121 commits)
drm/xe/sysctrl: Read mailbox phase bit from hardware
drm/xe/i2c: Keep the i2c controller always enabled
drm/xe/i2c: Fix the interrupt handling
i2c: designware: Global register definitions
drm/xe: Reject page faults from non-fault-mode scratch VMs
drm/xe/xe_gt_idle: Add CCS to the powergating info print
drm/xe: Do not apply WA 14025883347 to media 3503
drm/amd/display: fix dc_lock leak on GPU reset error paths
drm/amd/display: Fix redundant GPUVMEnable checks in dcn6 flip schedule
drm/amd/display: Fix wrong bytes-per-pixel value for dml2_422_packed_10
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
drm/amdgpu/userq: fix lock missing for userq fence error set
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
drm/amd/display: Log details when failing to register HPD IRQ
drm/amd/display: Fix HPD consideration for VGA/LVDS connectors on DCE
drm/amdgpu: clamp the isolation index for rings outside a partition
drm/amdkfd: Reject zero-sized AQL queue allocations after size halving
drm/amdgpu: Fix VCE 3 ring align_mask
drm/kfd: Add CU occupancy support to GFX12.1
...
Linus Torvalds [Fri, 28 Aug 2026 23:32:12 +0000 (16:32 -0700)]
Merge tag 'for-linus-7.3-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Several cleanup on error fixes and a missing RCU wait and proper
validation on a received message in one place.
The biggest change is the initialization of the driver can be done
asynchronously on a work queue. That saves significant boot time"
* tag 'for-linus-7.3-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user()
ipmi:msghandler: Cancel work cleanly on an error
ipmi:si: Add async init to ipmi_si
char: ipmi: use named initializers for acpi_device_id
ipmi: Fix leak in __ipmi_bmc_register
ipmi: Remove all sysfs files on registration failure
ipmi: si: Fix NULL pointer dereference after failed registration
ipmi: ipmb: validate write message length
Linus Torvalds [Fri, 28 Aug 2026 18:51:05 +0000 (11:51 -0700)]
Merge tag 'ceph-for-7.3-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A wide variety of mostly CephFS fixes and cleanups, split between
changes that address edge cases (Sam, Xiubo, Matthew), efficiency
improvements (Max) and AI-assisted hardening (Michael, Jeremy).
One thing that stands out is Alex's change to how CephFS behaves in
NEARFULL scenarios: the long-standing "make all writes synchronous"
behavior has become opt-in. It was always somewhat controversial and
doesn't make much sense for modern deployments; the new default is to
continue normal operation (i.e. buffer writes as MDS allows, etc). The
behavior in case the cluster reaches any FULL state remains the same
as before"
* tag 'ceph-for-7.3-rc1' of https://github.com/ceph/ceph-client: (32 commits)
ceph: force a cap message when a deferred revoke can't be acked immediately
libceph: reject buckets with mismatched CRUSH ids
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
ceph: fix leaked inode reference on writeback abort at umount
libceph: remove ceph_put_page_vector()
libceph: validate banner payload length
ceph: make nearfull sync writes opt-in
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph: drop mdsc->mutex before decoding the MDS reply
ceph: fix UAF in check_new_map() on session freed during unlock
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
ceph: pass inode pointer around instead of reloading it
ceph: mark cap remove with RB_CLEAR_NODE() instead of setting ci=NULL
ceph: add helper function ceph_cap_is_removed()
ceph: make __ceph_remove_cap() static
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph: bound num_export_targets array for mds info v2/v3
ceph: bound MDSCapAuth path and fs_name decode in handle_session()
ceph: bound xattr value length in __build_xattrs()
ceph: bound copied dentry name length in NFS export get_name
...
Linus Torvalds [Fri, 28 Aug 2026 17:59:07 +0000 (10:59 -0700)]
Merge tag 'ubifs-for-linus-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Support for a per-device wear-leveling threshold
- Various fixes and cleanups of error paths
- Correctly preserve torture flag up wear-leveling
UBIFS:
- Various fixes and cleanups of error paths and kernel-doc"
* tag 'ubifs-for-linus-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
UBI: support per-device wear-leveling threshold
UBI: fix two issues in the ubi.mtd MODULE_PARM_DESC
mtd: ubi: Release device reference on busy detach
ubi: Fix rollback for explicit UBI device numbers
ubifs: fix out-of-bounds read in signature length check
UBI: fastmap: Pass to_be_tortured when reusing old fastmap PEBs
UBI: Preserve torture flag when rescheduling failed erasures
ubifs: ubifs.h: clean up kernel-doc comments
ubifs: key.h: use correct function parameter name
ubifs: debug.h: fix kernel-doc struct prototypes
Linus Torvalds [Fri, 28 Aug 2026 17:48:48 +0000 (10:48 -0700)]
Merge tag 'f2fs-for-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, key enhancements focus on reducing inode management
memory overhead, introducing resizable tail sections with unified
pinned allocation, and boosting I/O throughput via parallel
multi-device flushes and asynchronous f2fs_write_end_io() execution.
We also add dynamic device alias reservations to allow on-the-fly
space donation from user partitions.
Alongside these features, critical bug fixes resolve folio race
conditions, lingering dirty flags, dentry and block counter leaks, and
potential deadloops in f2fs_fsync_node_pages(). Additional stability
patches address error-path handling across symlink, sync, and
rename/unlink operations, prevent pinned file fragmentation, and
correct segment migration and free section accounting in
free_segment_range.
Enhancements:
- reduce memory footprint of ino management
- support dynamic reserve/release for device aliasing
- issue multi-device flushes in parallel
- add a way to run f2fs_write_end_io() asynchronously
- support resizable tail section and unify pinned allocation
Bug fixes:
- fix to pass folio->index to f2fs_sanity_check_node_footer()
- fix folio_nr_pages() race after put in large folio invalidate
- fix to clear dirty flag on folio in error path
- accurately adjust free_sections during free_segment_range
- fix to avoid potential deadloop in f2fs_fsync_node_pages()
- fix the error path in symlink, device alias in rename/unlink,
f2fs_sync_fs
- fix to migrate all curseg types during free_segment_range
- fix to avoid pinfile fragment on fragment:{block, segment} mode
- fix valid block count leak on data block allocation failure
- fix dentry folio leak in find_in_level
- reject overlapping move range after len expansion
- fix some bugs related to file pinning, GC functions, i_size
And, the series includes a number of minor bug fixes"
* tag 'f2fs-for-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: support resizable tail section and unify pinned allocation
f2fs: don't leave the hashed inode while it's unlinked
f2fs: accurately adjust free_sections during free_segment_range
f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages()
f2fs: use adjusted write range after f2fs_write_checks()
f2fs: fix to propagate error from f2fs_sync_fs()
f2fs: return symlink writeback errors
f2fs: fix error handling on device alias check in rename and unlink
f2fs: fix to reset all pinned status during fggc
f2fs: use f2fs_{down, up}_(read, write}_trace() for nat_tree_lock
f2fs: reduce memory footprint of ino management
f2fs: fix i_size when pinned fallocate partially fails
f2fs: fix to migrate all curseg types during free_segment_range
f2fs: avoid setting SBI_NEED_FSCK on transient resize failure
f2fs: fix to avoid pinfile fragment on fragment:{block, segment} mode
f2fs: cleanup w/ f2fs_need_rand_{blk, seg, seg_blk}
f2fs: fix to shrink gc_lock coverage in f2fs_gc_range()
f2fs: fix to reclaim space in f2fs_allocate_pinning_section()
f2fs: unify add/remove ino entry API for all ino types
f2fs: fix to zero post-EOF data when extending file size
...
Linus Torvalds [Fri, 28 Aug 2026 17:01:02 +0000 (10:01 -0700)]
Merge tag 'sound-fix-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of various small fixes since the last PR. Most changes
are device-specific fixes, while there are a few fixes addressing the
issues reported recently by fuzzers.
Here are highlights:
ALSA Core:
- Prevent adding invalid kcontrols to the LED layer
- Workaround for a false-positive mutex lockdep warning in rawmidi
USB-audio:
- Relaxed the sticky mixer behavior check that caused regressions
- Fix an OOB write in Novation MIDI output
- Proper cleanup after system-resume errors
- Quirk updates for M-Audio Venom, Audient iD14 MkI, Logitech PRO X
Wireless, SMSL USB DAC, and Creative Sound Blaster Play! 3
HD-audio:
- Conexant headset plugin fixes
- Quirk additions and fixes for HP Laptop 15, Lenovo IdeaPad Slim 3,
TongFang XxAF5xxx, Lenovo Legion Pro 7, and Lenovo Yoga Pro 9
ASoC:
- DAPM: Fix off-by-one check on the second enum channel
- Tegra: Fix and sort register defaults
- AMD quirk updates for ASUS FA401EA, HP OmniBook X Flip 16,
HVY-WXX9/M1060, Alienware m18 R1, and MSI Thin A15 B7UC
- Fixes Qualcomm TDM handling
- Fix double put_device() on SoundWire
- Codec fixes for rt766, tac5xx2, rt712, tas2783, and max98926
Misc:
- Fix card leak on probe error on ice1712 driver
- Hardening for legacy aoa, mtpav and pcxhr drivers"
* tag 'sound-fix-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
ALSA: control: Don't add invalid kcontrols to LED layer
ASoC: amd: acp-config: change quirks to cover all ASUS FA401EA variants
ALSA: hda/conexant: Always enable the headset-mic pin on plugin
ASoC: dapm: Fix off-by-one check on the second enum channel
ASoC: amd: acp-config: force SoundWire probe on HP OmniBook X Flip 16
ASoC: amd: acp3x-es83xx: Add HVY-WXX9/M1060 DMI quirk
ASoC: amd: acp-config: Add HVY-WXX9/M1060 DMI quirk
ASoC: soc-generic-dmaengine: Fix DMA channel request warning
ALSA: rawmidi: Another workaround for false-positive mutex lockdep warning
ASoC: amd: yc: Add DMI entry for Alienware m18 R1 AMD
ASoC: amd: yc: Add DMI entry for MSI Thin A15 B7UC
ALSA: hda/realtek: Fix speaker mute LED for HP Laptop 15-fd0039nt
ALSA: usb-audio: Complete cleanup after system-resume errors
ALSA: hda/realtek: Add quirk for Lenovo IdeaPad Slim 3 15ABR8
ALSA: aoa: i2sbus: Check IRQ before requesting it
ALSA: usb-audio: Skip mixer creation on M-Audio Venom
ALSA: usb-audio: Skip reading sample rate on M-Audio Venom
ASoC: rt766: add RT766/RT767 VA1 device IDs
ALSA: hda/realtek: Add quirk for TongFang XxAF5xxx
ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()
...
Linus Torvalds [Fri, 28 Aug 2026 16:53:43 +0000 (09:53 -0700)]
Merge tag 'rtc-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The RZN1 driver got a fairly comprehensive cleanup. More DT binding
are converted to DT schema, leaving only 5 remaining files to convert.
Subsystem:
- patchwork project is moving to kernel.org
- fully initialize clk_init_data
- add missing MODULE_DEVICE_TABLE()
- DT bindings conversions to DT schema
Drivers:
- ds1307: fix WADA bit for alarms on RX8130
- rzn1: add support for RZ/T2H and RZ/N2H, many fixes"
* tag 'rtc-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (42 commits)
MAINTAINERS: update rtc subsystem patchwork location
rtc: msc313: Select by default on MSTARV7
rtc: microcrystal: Make sure clk_init_data is fully initialized
rtc: philips: Make sure clk_init_data is fully initialized
rtc: nct3018y: Make sure clk_init_data is fully initialized
rtc: m41t80: Make sure clk_init_data is fully initialized
rtc: hym8563: Make sure clk_init_data is fully initialized
rtc: rzn1: Add support for Renesas RZ/T2H and RZ/N2H SoCs
rtc: rzn1: Drop trailing comma from OF match table sentinel
rtc: rzn1: Add OF match data to gate SUBU register access
rtc: rzn1: use FIELD_PREP/FIELD_GET and GENMASK for register access
rtc: rzn1: Consistently use dev_err_probe()
rtc: rzn1: Use temporary variable for struct device
rtc: rzn1: Dynamically calculate synchronization delay based on clock rate
rtc: rzn1: Replace remove callback with devm_add_action_or_reset()
rtc: rzn1: Use pm_runtime_put_sync()
rtc: Kconfig: Broaden RTC_DRV_RZN1 dependency to ARCH_RENESAS
rtc: rzn1: Fix malformed MODULE_AUTHOR string
rtc: rzn1: Disable alarm interrupt before reprogramming alarm registers
rtc: rzn1: Fix alarm range check truncation on 32-bit systems
...
Linus Torvalds [Fri, 28 Aug 2026 16:36:27 +0000 (09:36 -0700)]
Merge tag 'for-next-tpm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"The bulk of this is Ross Philipson's TPM enablement for Trenchboot.
That exposes TPM constants, and decouple and improve robustness of
tpm_buf a bit in order to implement a minimal early TPM driver.
Early boot code will call either SKINIT on AMD or GETSEC[SENTER] on
Intel before jumping into kernel's entry point. They re-initalize TPM
PCRs but leave up to the early boot code measure initrd, boot_params
and Trenchboot associated metadata.
The motivation here is just that we would want in future iterations of
the series put our full focus to the x86 part of the review, and call
it a day as per TPM changes. Further, even if Trenchboot turned out to
be empty lottery the worst possible outcome for TPM driver is that
things get cleaned up a bit"
* tag 'for-next-tpm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm-buf: Add TPM buffer support header for standalone reuse
tpm-buf: Memory-safe allocations
tpm-buf: Remove chip parameter from tpm_buf_append_handle()
tpm-buf: Merge TPM_BUF_BOUNDARY_ERROR and TPM_BUF_OVERFLOW
tpm: Remove main TPM header from TPM event log header
tpm: Move platform specific definitions to the new PTP header
tpm: Move TPM common base definitions to the command header
tpm: Move TPM2 specific definitions to the command header
tpm: Move TPM1 specific definitions to the command header
tpm: Initial step to reorganize TPM public headers
tpm: st33zp24: Validate locality read result
tpm: st33zp24: Return zero on status read failure
tpm: tpm_tis_spi: fix nodef CR50 tpm_tis_spi_resume is null
tpm: atmel: depend on X86
tpm: Remove redundant dev_err()
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
Linus Torvalds [Fri, 28 Aug 2026 16:02:04 +0000 (09:02 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A mixture of ptdump, compat and MTE fixes that came in during the
merge window:
- Fix address handling of final memory region in ptdump
- Fix emulation of decrementing load/store multiple from 32-bit task
- Fix SCTLR context-switching for store-only MTE mode
- Fix numerous issues in MTE selftests"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
selftests/arm64: Add MTE test config fragment
selftests/arm64: Fix MTE prctl TAP plan
selftests/arm64: Treat KSM merge_across_nodes as optional
selftests/arm64: Print missing MTE TAP headers
arm64: compat: Fix decrementing LDM/STM alignment emulation
arm64: process: Fix context switching MTE store-only tag check
KVM: arm64: ptdump: Flush the last region
arm64: ptdump: Make note_page_flush() range aware
Linus Torvalds [Fri, 28 Aug 2026 15:55:47 +0000 (08:55 -0700)]
Merge tag 'xtensa-20260828' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- use strnlen() to improve iss_console_write()
- remove unused function setup_profiling_timer()
- fix CONFIG_XTENSA_CALIBRATE_CCOUNT macro name in comment
* tag 'xtensa-20260828' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: remove unused setup_profiling_timer function
xtensa: correct CONFIG_XTENSA_CALIBRATE_CCOUNT macro name in comment
tty: xtensa/iss: use strnlen to improve iss_console_write
Linus Torvalds [Fri, 28 Aug 2026 15:44:36 +0000 (08:44 -0700)]
Merge tag 'm68knommu-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"This includes a couple more new defconfigs to improve test build
coverage, changes to use the more correct linux/gpio/legacy.h and
platform setup for the reset device of the ColdFire 5441x SoC
hardware.
- new defconfigs for 2 more ColdFire boards
- change to use linux/gpio/legacy.h
- add platform setup for reset device of the 5441x SoC boards"
* tag 'm68knommu-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/5441x: register mcf-rcm-reset platform device
m68k/coldfire: replace linux/gpio.h inclusions
m68k: defconfig: add config for M5282EVB board
m68k: defconfig: add config for M52358EVB board
ring-buffer: Stop remote reader update when page swap fails
The remote swap_reader_page callback can return -EBUSY when the writer
moves the head before the remote catches it, particularly during an event
storm on a small buffer. __rb_get_reader_page_from_remote() currently
warns about that failure but continues with the unchanged reader ID and
rearranges the local page list as though the swap succeeded.
Handle the callback failure as a recoverable error. Report it with
pr_warn_ratelimited() and return NULL. Callers already handle a NULL reader
page as a failed attempt. This avoids splicing the same page as both the
previous and new reader without flooding the log under contention.
Cc: stable@vger.kernel.org Fixes: 2e67fabd8b77 ("ring-buffer: Introduce ring-buffer remotes") Link: https://patch.msgid.link/20260825-kernel-patch-1-v2-2-bb3461807a32@gmail.com Assisted-by: LLM sparse Signed-off-by: Ivan Immanuel Shaji <ivanimmanuel1234@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing: Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a failed
replacement leaves it at -1.
The current !retry test reverses both outcomes. It returns an error after
a successful final replacement, leaving the link update complete but the
reader bookkeeping unfinished. After a failed final replacement, it
falls through and updates the head and reader pointers as though the
replacement succeeded, which can corrupt the ring.
Treat only a negative counter as exhaustion and return the documented
-EBUSY error.
Cc: stable@vger.kernel.org Fixes: 34e5b958bdad ("tracing: Introduce simple_ring_buffer") Link: https://patch.msgid.link/20260825-kernel-patch-1-v2-1-bb3461807a32@gmail.com Assisted-by: LLM sparse Reviewed-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Ivan Immanuel Shaji <ivanimmanuel1234@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jérémy Jean [Thu, 27 Aug 2026 18:43:22 +0000 (18:43 +0000)]
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event_mm+0x51/0x1d0 Write of size 4 at addr ffff888005010d30 by task init/44
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debugfs_start_creating+0xdb/0x1a0
debugfs_create_dir+0x24/0x350
i2c_device_probe+0x814/0xbf0
It's technically possible to create a client after i2c_deregister_clients
has run. That client will never be unregistered and make
wait_for_completion hang.
Close the window by removing the new_device attribute at the start of
i2c_del_adapter(). device_remove_file() will drain any clients left.
Carlos Song [Mon, 3 Aug 2026 03:27:05 +0000 (11:27 +0800)]
i2c: imx-lpi2c: avoid accessing target registers on master-only controllers
Not all LPI2C controller instances implement the Target block.
Since commit 90311787f483 ("i2c: imx-lpi2c: reset controller in
probe stage"), the driver unconditionally resets both the Master
and Target blocks during probe.
On controllers that do not support target mode, accessing the
Target registers triggers an asynchronous SError and prevents the
driver from probing successfully. For example on i.MX8QM:
SError Interrupt on CPU2, code 0x00000000bf000002 -- SError
Hardware name: Freescale i.MX8QM MEK (DT)
pc : lpi2c_imx_probe+0x280/0x594
lr : lpi2c_imx_probe+0x224/0x594
Kernel panic - not syncing: Asynchronous SError Interrupt
The VERID register is implemented in the Master block and can be
safely accessed on all controller variants. Its FEATURE field
indicates whether target mode is supported.
Read VERID during probe and use it to determine whether the
Target block is present. Only access Target registers when target
mode is supported and reject target registration requests with
-EOPNOTSUPP otherwise.
Guangshuo Li [Wed, 12 Aug 2026 09:44:25 +0000 (17:44 +0800)]
i2c: qcom-cci: fix autosuspend cleanup
cci_probe() calls pm_runtime_use_autosuspend(), but the remove path
does not call the matching pm_runtime_dont_use_autosuspend() before
disabling runtime PM.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without undoing the autosuspend setting during
teardown, this reference is not dropped and usage_count remains
unbalanced.
Use devm_pm_runtime_set_active_enabled() to manage the runtime PM
state. Its managed cleanup disables autosuspend and runtime PM and
restores the suspended state on probe failure and driver removal.
Remove the now redundant manual runtime PM cleanup.
This issue was found by manual code inspection.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://patch.msgid.link/20260812094425.3515179-1-lgs201920130244@gmail.com
Hongbo Yao [Wed, 26 Aug 2026 07:05:47 +0000 (15:05 +0800)]
i2c: designware: Enable interrupt mask workaround for HJMC3001
On HJMicro ARM64 servers, the DesignWare I2C controller does not
retrigger a pending interrupt if the interrupt status changes after
the current status bits have been cleared.
The issue is exposed under heavy system load when the corresponding
SPI is routed across sockets to a core in the remote socket. The
interrupt is then lost and the I2C transfer times out.
Enable ACCESS_INTR_MASK for HJMC3001. This toggles DW_IC_INTR_MASK
before returning from the interrupt handler and retriggers any
pending interrupt.
Fixes: 6816ce57c479 ("i2c: designware: Add a new ACPI HID for HJMC01 I2C controller") Signed-off-by: Hongbo Yao <andy.xu@hj-micro.com> Cc: <stable@vger.kernel.org> # v6.13+ Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://patch.msgid.link/20260826070547.268672-1-andy.xu@hj-micro.com
i2c: qcom-geni: update frequency table to fix timing parameters
In IPQ5424, to meet the setup and hold timing requirements in the
standard mode, update the frequency table with the values recommended by
HW design team.
Also remove the stray space in the I2C_MAX_FAST_MODE_FREQ entry.
Fixes: 85c34532849d ("i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates") Fixes: 506bb2ab0075 ("i2c: qcom-geni: Support systems with 32MHz serial engine clock") Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> Cc: <stable@vger.kernel.org> # v6.13+ Reviewed-by: Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://patch.msgid.link/20260812-ipq5424_i2c_scl_updates-v2-1-e09cd39d01d7@oss.qualcomm.com
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
Jakub Kicinski [Thu, 27 Aug 2026 20:13:18 +0000 (13:13 -0700)]
Merge tag 'nf-26-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use DEBUG_NET_WARN_ON_ONCE() instead of WARN_ON() from the tproxy
datapath, a recent bug found a way to reach WARN_ON from datapath
due to insufficient validation of xt_TPROTO checkentry.
From Fernando F. Mancera.
2) Similar to previous patch to replace WARN_ON_ONCE by
DEBUG_NET_WARN_ON_ONCE() for connlimit. Not known issue, but
since this patch has been around for a while, let's merge it.
Also from Fernando.
3) Move nf_tables harware offload commit path after chain blob
and audit to reduce chances of leaving the hardware in
inconsistent state.
4) Add missing vzeroupper to nf_tables pipapo AVX2 to address
performace degradation to later user of SSE code,
from Eric Biggers.
5) Remove pr_debug() in x_tables extensions, a recent bogus found a
way to print a unsanitized string in xt_IDLETIMER, many of these
pr_debug() calls are there for historical reasons.
6) Use pr_info_ratelimited() in x_tables .checkentry.
7) Fix an imbalance in module refcount due to incorrect override
expression logic with sets. Remove unnecessary clone in control
plane, use the existing expressions provided by set or dynset
expression. Release override expressions only.
8) Tigthen nf_tables device name removal, it is possible to remove
prefix strings with exact device name. From Fernando F. Mancera.
9) Set on the set dead bit earlier, otherwise it is possible to
call .commit on deleted sets. This also addresses the
re-introduction of a bug.
* tag 'nf-26-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: remove leftover set_update_list
netfilter: nf_tables: set on dead bit when performing early element removal
netfilter: nf_tables: skip double clone set expressions on element insert
netfilter: x_tables: replace pr_{info,err}() by pr_info_ratelimited()
netfilter: x_tables: remove pr_debug
netfilter: nft_set_pipapo_avx2: add missing vzeroupper
netfilter: nf_tables: move hardware offload step after building the chain blob
netfilter: conncount: use DEBUG_NET_WARN_ON_ONCE on reaching count limit
netfilter: tproxy: use DEBUG_NET_WARN_ON_ONCE for protocol fallbacks
====================
Xinyang Ge [Thu, 27 Aug 2026 14:07:07 +0000 (16:07 +0200)]
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged.
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Cc: stable@kernel.org Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xinyang Ge <xinyang@anthropic.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/937926e509f2acd8e0e66520dc2b30fd6b4d1687.1787839506.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_classify() follows each filter-selected inner class by switching
to cl->filter_list, but never bounds the number of hops. A filter on
an inner class can point back to itself or to another inner class that
points back, creating an infinite loop in the packet classification
path with the qdisc lock held and BH disabled — a soft lockup / panic
from a single packet.
Bound the traversal with a hop counter and drop the packet with a
rate-limited warning once the bound is exceeded. The counter is
incremented at the point the inner filter chain is picked up, after the
TC_ACT_* switch has consumed the classifier verdict, so a terminal
TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr
to __NET_XMIT_STOLEN and the packet is not charged as a drop by this
qdisc or its parent.
The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than
from the qdisc hierarchy depth limit. Class levels run from 0 to
TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can
take at most TC_HTB_MAXDEPTH hops. That descent is what a sane
configuration does, but it is assumed here rather than enforced:
htb_find() resolves a classid against every class in the qdisc, so a
filter may equally select a sibling or an ancestor. The normal
root -> inner -> leaf path takes a single hop, so the bound does not
affect legitimate classification.
htb_classify() can now return NULL irrespective of CONFIG_NET_CLS_ACT,
whereas previously every NULL return sat inside that ifdef. The NULL
handler in htb_enqueue() therefore cannot stay conditional either, so
drop the ifdef around it. This matches hfsc_enqueue(), which has always
handled a NULL class unconditionally. Without it, a kernel built
without actions would dereference a NULL class instead of dropping.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HTB, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Create an HTB qdisc on a device (e.g. lo), add an inner class
1:1 with a leaf child 1:10, install a root u32 filter selecting
1:1, and an inner-class u32 filter on 1:1 also selecting 1:1.
- Send one packet (ping). On the unfixed kernel the classify loop
spins with the qdisc lock held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Vega <vega@nebusec.ai> Co-developed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260826143339.271935-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drive a connection into urgent mode and force a multi-segment retransmit,
checking that each retransmitted segment keeps its own urg_ptr.
The test asserts the fixed behaviour: the hole is retransmitted as two
independent skbs, each with its own urg_ptr (5001 and 4001) and no PSH.
An unpatched kernel instead sends one super-skb whose GSO split copies
urg_ptr onto the second segment and also sets PSH there, so on an unpatched
kernel the mismatch shows up on the PSH bit (actual P.U ... urg 5001) before
the urg_ptr:
tcp_urg_ptr_retransmit.pkt:63: live packet field tcp_psh:
expected: 0 (0x0) vs actual: 1 (0x1)
script packet: .U 1001:2001(1000) ack 1
actual packet: P.U 1001:2001(1000) ack 1 win 1050
After the fix the retransmit carries a per-segment urg_ptr and the test
passes.
The retransmit path has no such guard. __tcp_retransmit_skb() builds a
segs > 1 skb and hands it to the GSO layer, which only advances th->seq
per segment and copies urg_ptr verbatim:
/* __tcp_retransmit_skb() */
len = cur_mss * segs; /* segs > 1, no urg_mode check */
...
/* tcp_gso_segment(): bumps seq only, urg_ptr is copied */
urg_ptr is an offset from the segment's own seq, so a copied value points
at a different place on each segment. The receiver rebuilds the absolute
urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead
of the one OOB byte:
The real OOB byte is never pointed at, so the receiver stops splicing it
out and delivers it as normal in-band data, corrupting the stream.
Guard the retransmit length like the xmit path: keep segs = 1 while in
urgent mode.
Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260826141145.67823-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci.
fec_ptp_init() is only called when fep->bufdesc_ex is available.
However, fec_probe() unconditionally calls fec_ptp_stop() on the
failed_init path, and fec_drv_remove() unconditionally calls
fec_ptp_stop() during device removal.
Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths
to avoid stopping PTP when it was not initialized.
Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path") Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260826103428.32807-1-phucduc.bui@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 26 Aug 2026 10:52:38 +0000 (10:52 +0000)]
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read
in slip_receive_buf() when racing against tty hangup.
tty_ldisc_hangup() calls ld->ops->hangup() while holding only
a read lock on tty->ldisc_sem (via tty_ldisc_ref()).
Because slip_hangup() simply called slip_close(), it ran concurrently
with reader functions such as slip_receive_buf().
slip_close() unregisters and frees the net device and its private
struct slip, causing concurrent reader threads in slip_receive_buf()
to dereference freed memory.
Line discipline close() is already guaranteed to be called under
the write lock of tty->ldisc_sem during hangup processing
(in tty_ldisc_reinit() or tty_ldisc_kill()).
Remove slip_hangup() so teardown is serialized cleanly by slip_close().
Fixes: 5342b77c4123 ("slip: Clean up create and destroy") Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr> Reported-by: Eulgyu Kim <eulgyukim@snu.ac.kr> Closes: https://lore.kernel.org/netdev/20260825150655.1450271-1-jjy600901@snu.ac.kr/ Cc: Qingfang Deng <qingfang.deng@linux.dev> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260826105238.3323436-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 27 Aug 2026 19:38:05 +0000 (12:38 -0700)]
Merge tag 'spi-fix-v7.3-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: Geert fixed an
uninitialised data bug in the amlogic-spisg driver which could crash
and in the Loongson driver Li Jun hooked up the existing suspend
operations more fully to fix hibernation"
* tag 'spi-fix-v7.3-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: loongson: pm: add .freeze .poweroff .thaw .restore
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
Norbert Szetei [Wed, 26 Aug 2026 09:12:27 +0000 (11:12 +0200)]
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under
br->multicast_lock before stopping a VLAN's multicast context. That is
the teardown handshake: lockless readers gate on the flag through
br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so
once it is cleared under the lock no reader can arm the context again.
For a master VLAN the handshake never runs. __vlan_del() clears
BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so
br_multicast_toggle_one_vlan(masterv, false) returns early on
!br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is
never taken. br_vlan_put_master() then drains the context in
br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a
reader still inside rcu_read_lock() sees the context as enabled and
re-arms it. The port and port-VLAN branch of the function has no
br_vlan_is_brentry() test and flips the flag under br->multicast_lock,
so it is not affected.
The reader is the bridge transmit path. For a master VLAN
br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with
pmctx = NULL, so IGMP sent to the bridge device re-arms the context's
timers after br_multicast_ctx_deinit() has already stopped them.
BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0
Write of size 8 at addr ffff88810ac39918 by task brmc/601
__mod_timer+0x51a/0xc50
br_multicast_host_join+0x25b/0x390
__br_multicast_add_group+0x468/0x530
br_ip4_multicast_add_group+0x1a0/0x260
br_multicast_rcv+0x2cda/0x61e0
br_dev_xmit+0x6c4/0x1540
Allocated by task 610:
br_vlan_add+0x111/0xb40
br_vlan_info+0x370/0x3e0
Freed by task 0:
kfree+0x1a7/0x4f0
rcu_core+0x7dc/0x10a0
Only test br_vlan_is_brentry() when enabling, like the
br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then
always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before
br_multicast_ctx_deinit() drains the context.
Fixes: 7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control") Cc: stable@vger.kernel.org Signed-off-by: Norbert Szetei <norbert@doyensec.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/D400F6C7-543A-4B79-9E5B-D1D8974DE5C9@doyensec.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 27 Aug 2026 19:21:56 +0000 (12:21 -0700)]
Merge tag 'regulator-fix-v7.3-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix here, for a race condition on startup in the tps65185 driver
which is seen on actual boards - we need a delay after waking the chip
before it is ready to talk to the host"
* tag 'regulator-fix-v7.3-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65185: wait for the IC to wake before the first I2C access
Linus Torvalds [Thu, 27 Aug 2026 19:14:19 +0000 (12:14 -0700)]
Merge tag 'dma-mapping-7.3-2026-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- integer overflow fix for kernel cmdline parser for DMA contiguous
initialization code (Alexander Graf)
* tag 'dma-mapping-7.3-2026-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: fix truncation of numa_cma / cma_pernuma sizes >= 2G
Jamal Hadi Salim [Tue, 25 Aug 2026 08:14:03 +0000 (04:14 -0400)]
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
qdisc_get_stab() accepts a user-supplied size table, and
__qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the
overhead, the size-table data (u16), and size_log (up to
STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len()
to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as
DRR and ETS replenish one quantum per loop iteration; with a tiny
quantum (1) they spin billions of times under the qdisc lock,
producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai.
Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table
amplification cannot drive deficit schedulers into an unbounded loop.
A legitimate size table (e.g. qfq's overhead 999999999, which is
handled by dropping) is still accepted.
Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above
any legitimate single-skb wire length: the largest current skb->len
is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax)
amplifies that to ~578 KB, both comfortably below 1 MiB. At the same
time, 1 MiB bounds the deficit refill loop to ~1M iterations per
packet with quantum=1, which completes in a few milliseconds well
under the demonstrated softlockup threshold (~10^9 iterations).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y).
- Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that
amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]).
- Add a class with a tiny quantum of 1 and send one small packet; the
deficit loop spins billions of times under the qdisc lock and trips
the softlockup detector (panic with kernel.softlockup_panic=1).
- Reachable as root or from an unprivileged user in a fresh user+net
namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260825081403.133992-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edoardo Pinci [Mon, 24 Aug 2026 13:11:43 +0000 (15:11 +0200)]
net: dsa: mxl862xx: enable assisted learning on CPU port
The MxL862xx driver enables FDB isolation but does not enable assisted
learning on the CPU port. Consequently, MAC addresses learned through a
physical switch port are not updated in hardware when the corresponding
station moves to a foreign bridge port, such as a Wi-Fi interface.
The stale hardware FDB entry continues directing return traffic toward
the original physical port. Traffic entering that same port is then
filtered instead of being forwarded to the CPU and software bridge. This
causes downstream unicast traffic, including DHCP OFFER and ACK packets,
to disappear after a client roams to a local wireless interface. The
client eventually considers the connection unusable and disconnects.
Enable assisted CPU-port learning so DSA installs foreign bridge FDB
entries on the CPU port. This keeps the hardware FDB synchronized with
the software bridge and allows return traffic to reach locally attached
Wi-Fi clients after roaming.
Tested on a BPI R4 PRO with a MxL862xx switch and a BE14000 WiFi interface.
- Without patch, wired uplink on lan6 port (mxl path)
Wifi clients connect but roam away not getting DHCP offers
- Without patch, wired uplink on wan port (no mxl path)
Wifi clients connect and roam successfully
- With this patch, uplink on lan6 (mxl path)
Wifi clients connect and roam successfully
Pascal Kneuper [Mon, 24 Aug 2026 12:50:14 +0000 (14:50 +0200)]
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068e59020a0e28dc010e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for.
Fixes: df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX path") Cc: Daniel Baldin <DBaldin@dspace.de> Signed-off-by: Pascal Kneuper <PKneuper@dspace.de> Link: https://patch.msgid.link/20260824125014.47862-1-PKneuper@dspace.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 27 Aug 2026 18:16:39 +0000 (11:16 -0700)]
Merge tag 'backlight-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Silergy SY7758: Add driver for the 6-channel high-efficiency LED
driver
Improvements & Fixes
- Awinic AW99706: Fix device tree property names to match the
binding, consistently validate all property values, and honor the
core blank state in `update_status()`
- Kinetic KTD2801: Add missing dependency on `GPIOLIB` in Kconfig
- Qualcomm WLED: Remove redundant `dev_err()` calls
Cleanups & Refactoring
- Core: Use `sysfs_emit()` instead of `sprintf()` in sysfs show
callbacks
- Maintainers: Update Junjie Cao's email address for the Awinic
AW99706 driver
Device Tree Binding Updates
- Marvell 88PM860X: Add missing bracket in the example
- Silergy SY7758: Document the 6-channel high-efficiency LED driver"
* tag 'backlight-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Use sysfs_emit() instead of sprintf()
backlight: qcom-wled: Remove redundant dev_err()
backlight: ktd2801: Fix unmet dependency on GPIOLIB
backlight: aw99706: Honor the core blank state in update_status()
backlight: aw99706: Validate all DT property values consistently
backlight: aw99706: Fix DT property names to match binding
dt-bindings: backlight: 88pm860x: Add missing bracket
MAINTAINERS: Update my email address for the AW99706 backlight driver
backlight: Add SY7758 6-channel High Efficiency LED Driver support
dt-bindings: leds: backlight: Document the SY7758 6-channel High Efficiency LED Driver
Linus Torvalds [Thu, 27 Aug 2026 18:05:51 +0000 (11:05 -0700)]
Merge tag 'leds-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Core: Extend netdev trigger speeds up to 100G
- PWM Multicolor: Introduce default-intensity property
- Analog Devices LTC3220: Add support for 18 channel LED driver
- NXP PCA963x: Add multicolor LED class support
Improvements & Fixes:
- GPIO: Clear error pointers for skipped LEDs
- Broadcom BCM63138: Use %pe to print pinctrl error instead of %ld
- ISSI IS31FL319x: Modernize device registration by using fwnode APIs
- NXP PCA9532: Fix inverted GPIO output polarity
- NXP PCA9532: Fix phantom device registration on missing hardware
- STMicroelectronics ST1202: Correct and extend hw_pattern
documentation
- STMicroelectronics ST1202: Fix channel disable logic on zero
brightness and ensure brightness changes are applied in active mode
- STMicroelectronics ST1202: Fix hardware pattern sequence
programming, validate inputs, and correct pattern duration
calculations
- STMicroelectronics ST1202: Validate LED reg property against
channel count
- TI LP5860: Fix a potential double-unlock during device
initialization and fix error handling path by using
devm_mutex_init()
Cleanups & Refactoring:
- GPIO: Make legacy gpiolib interface optional
Device Tree Binding Updates:
- Core: Add default-intensity property
- Core: Document "gpio" trigger
- Analog Devices LTC3220: Add DT binding for LTC3220 18 channel LED
driver
- Broadcom BCM6358: Convert to DT schema
- LaCie NS2: Convert to DT schema
- NXP PCA963x: Add multicolor LED support
- NXP PCA963x: Fix reg maximum for pca9635
- TI TPS65217: Convert backlight bindings to DT schema"
* tag 'leds-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (29 commits)
leds: is31fl319x: Modernize registration
dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
leds: pca963x: Add multicolor LED class support
dt-bindings: leds: nxp,pca963x: Add multicolor LED support
dt-bindings: leds: nxp,pca963x: Fix reg maximum for pca9635
leds: gpio: Clear error pointers for skipped LEDs
dt-bindings: leds: backlight: Convert TPS65217 to DT schema
leds: pca9532: Fix phantom device registration on missing hardware
leds: gpio: Make legacy gpiolib interface optional
leds: bcm63138: Use %pe to print pinctrl error instead of %ld
dt-bindings: leds: Add default-intensity property
leds: ltc3220: Add Support for LTC3220 18 channel LED Driver
dt-bindings: leds: Add LTC3220 18 channel LED Driver
dt-bindings: leds: bcm6358: Convert to DT schema
dt-bindings: leds: Document "gpio" trigger
leds: st1202: Correct and extend hw_pattern documentation
leds: st1202: Validate LED reg property against channel count
leds: st1202: Disable channel when brightness is set to zero
leds: st1202: Fix brightness having no effect while pattern mode is active
leds: st1202: Fix spurious pattern sequence start in setup
...
Lorenzo Bianconi [Mon, 24 Aug 2026 09:59:08 +0000 (11:59 +0200)]
net: stmmac: drop gso_enabled_types and rely on netdev features
The gso_enabled_types field is used by stmmac_xmit() to decide whether a
GSO skb should be passed to stmmac_tso_xmit(). It is updated in
stmmac_set_features() based solely on NETIF_F_TSO, so disabling IPv4
TSO while keeping IPv6 TSO (NETIF_F_TSO6) enabled zeroes the mask. As a
result IPv6 GSO frames, which the networking stack still generates since
NETIF_F_TSO6 is enabled, fall through to the non-TSO xmit path where
they are not handled.
The networking stack already manages the GSO logic: a GSO skb is only
delivered to the driver when the matching offload feature (NETIF_F_TSO,
NETIF_F_TSO6 or NETIF_F_GSO_UDP_L4) is enabled, otherwise the frame is
segmented in software before reaching ndo_start_xmit().
stmmac_features_check() also validates each GSO frame against the TSO
hardware constraints and falls back to software GSO when they are not met.
Drop the gso_enabled_types field and rely on skb_is_gso() in
stmmac_xmit() instead, which correctly routes IPv6 GSO frames to the TSO
path when NETIF_F_TSO is disabled. This also removes the data race
between stmmac_set_gso_types(), called from the feature-set path, and
the lockless read of gso_enabled_types in stmmac_xmit().
====================
net: stmmac: More selftest related fixes
This series addresses some (but not all) issues found while running the
ethtool selftest on various stmmac platforms. As a reminder, ethtool
selftest are run with 'ethtool -t ethX', and for stmmac the goal is to test
hardware features and bugs from the IP integration in the platform.
So, only sogfpga is all OK (in all fairness, it doesn't support much)
Several issues :
- MMC test failing on starfive and meson8b, solved by patch 1
MMC counters maintained by the MAC are optional, which one is implemented
depends on how the IP is synthesized. On starfive and meson8b, the counter
used by the selftest to validate the MMC counters feature isn't implemented.
Solved by adding other counters in the validation step, kinda fragile as
this doesn't guarantee this will work on all platforms.
- Flow control test failing on starfive, imx8mp, sun8i, solved by patch 6
Turns out these platforms actually never emit any Pause frame, as they don't
have enough room in their per-queue RX Fifo. They do correctly process RX
Pause frames. The fix isn't to change the advertised pauseparams, as the
pause negotiation process based on MAC capabilities doesn't allow us to
say we "just" support RX pause, so let's just not run the Pause tests if
the RX fifo is too small.
- UC filter failing on meson8b, fixed by patches 2,3,4 and 5
This one is quite the rabbit hole, and is a combination of multiple issues.
- Unicast filtering uses the same filter (perfect filter) to allow the
primary MAC address and the secondary addresses (dev->uc) to flow
through the interface. That means if we have say 64 slots in the
perfect filter, only 63 can be used for the dev->uc list, as the first
entry stores the MAC address. If the filter is full, we switch to UC
promisc mode, were we let all UC frames flow. There's an off-by-one
error in dwmac1000, dwmac4 and dwxgmac2.
- The selftest itself needs an empty slot in the filter, so it has to
check that sizeof(dev->uc) is $number_of_slots - 2 (one for primary
MAC, one for the test). There's an off-by-two error in the selftest.
- This leads to an interesting finding (not addressed by this series) :
The size of the perfect filter isn't reported by the HW, so it comes
from firmware (snps,perfect-filter-entries). A lot of platforms don't
specify that in DT (e.g. imx8mp doesn't, it has 128 entries but the
driver thinks there's only 1...). I've reached out to Synopsys to
see if there's some sane default we could use on dwmac4, if anyone
has a dwmac4 databook I'd appreciate if you could look this up, as I
don't have access to them, I'm not a vendor... Otherwise, we'll have
to patch all the .dtsi if we want to avoid going in UC promisc as
soon as we add an entry in dev->uc.
After this series, socfpga, starfive and sun8i are all OK :)
Some issues are still out there, the VLAN filtering and tagging fails on
imx8mp and stm32 (so, dwmac4) butI haven't got there yet.
ARP offload doesn't work on stm32mp157a and starfive JH7110 either.
====================
net: stmmac: selftests: Don't test flow control for small rx fifos
On dwmac1000, dwmac4 and dwxgmac, we only emit pause frames if there's
at least 4096 bytes in each queue's fifo.
The phylink mac capabilities are still MAC_ASYM_PAUSE | MAC_SYM_PAUSE as
otherwise we won't be able to negotiate 'rx on' pause. ASYM only will
prevent negotiating 'rx off tx on', while SYM only doesn't really
matche the reality (not symmetric if we can only do RX pause).
net: stmmac: selftests: Account for the UC filter list for filtering tests
On dwmac, one of the Unicast filter entries is used to store the local
HW addr. This means that we have to use promisc mode for any kind of
unicast filtering if we only have one slot in our unicast filter.
The number of slots available depends on how the IP is integrated, and
we can't autodiscover how many of these slots we have available, so
the DT property snps,perfect-filter-entries can be used to specify how
many are available.
Most IP variants default to 1 if this isn't specified, which is the case
for the amlogic variants (in this case, S905X3).
The stmmac selftests for UC filtering look if we have enough slots in
the filter to store the dev->uc list, but doesn't account for the
device's own MAC address. The dev->uc list's size we get with
netdev_uc_count() also doesn't account for the HW addr.
As the selftest only requires one available slot, in the case of
single-slot platforms, that means we erroneously consider we have enough
room for the test, when we actually don't, and the filtering test fails.
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
The same filter slots are used to store the main MAC address as well as
the address for the unicast filter. Let's account for that when deciding
whether or not to use promisc when programming the UC list in hardware.
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
The same filter slots are used to store the main MAC address as well as
the address for the unicast filter. Let's account for that when deciding
whether or not to use promisc when programming the UC list in hardware.
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
The same filter slots are used to store the main MAC address as well as
the address for the unicast filter. Let's account for that when deciding
whether or not to use promisc when programming the UC list in hardware.
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260826140500.616466-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MMC counters report MAC statistics. Multiple counters can be
enabled when the IP is integrated, however there's no way to know
exactly which ones. Un-implemented counters seem to report 0.
It was found that on StarFive JH7110 and Amlogic SM1, the counter that's
used by the selftest (mmc_tx_framecount_g) isn't implemented, triggering
an MMC selftest failure.
Both the above SoCs seem to implement mmc_rx_framecount_gb, let's use
this counter as well for MMC counter validation.
Note that this doesn't guarantee that we won't encounter the same issue
again if another IP implements yet another set of counters that don't
include that new one.
If the game of whack-a-mole with implemented counters becomes too hard to
maintain, we may simply consider removing the MMC selftest entirely.
Linus Torvalds [Thu, 27 Aug 2026 17:45:08 +0000 (10:45 -0700)]
Merge tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- MediaTek MT6397: Add mt6323 AUXADC support
- MediaTek MT6397: Add mt6323 EFUSE support
- Spreadtrum SC27xx: Add SC2730 regulator cell
Improvements & Fixes:
- Apple SMC: Fix key count endianness annotation
- Azoteq IQS62x: Reject zero-length firmware records
- ChromeOS EC: Introduce cros_ec_read_features helper and read
features during probe to catch transfer errors
- Cirrus Logic CS42L43: Fix regmap defaults ordering
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire
- Congatec Board Controller: Fix teardown ordering in cgbc_remove()
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str
- Marvell 88PM886: Initialize the battery page
- QNAP MCU: Keep the reply buffer alive past a command timeout
- RAVE SP: Validate received frame payload lengths
- Silicon Labs Si476x: Drop duplicate NULL checks
- Silicon Labs Si476x: Modernize GPIO handling
- Silicon Motion SM501: Fix potential memory leaks during remove
- UCB1x00: Convert Assabet gpio-keys to use software nodes and
register software node for GPIO controller
- Viperboard: Fix native fields type in structures as little-endian
- Viperboard: Remove redundant NULL check before kfree()
- X-Powers AXP20x: Preserve other control bits when powering off
Cleanups & Refactoring:
- Core: Drop unused assignment of spi_device_id driver data
- Core: Initialize spi_device_id arrays using member names
- Core: Unify style of spi_device_id arrays
- Maintainers: Add Intel LPSS section to follow the changes
- Maintainers: Add a mailing list entry to MFD
- Cirrus Logic CS42L43: Format sdw_device_id table
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper
- ROHM PMIC: Factor out power button registration and convert
gpio-keys to use software nodes
- ST-Ericsson DB8500: Fold dbx500 header into db8500
Device Tree Binding Updates:
- Core: Add techvision vendor prefix
- Marvell 88PM886: Allow vbus regulator
- MediaTek MT8195 SCP: Add support for MT8189 SoC
- Qualcomm SPMI PMIC: Document PMG1110
- Qualcomm SPMI PMIC: Document haptics device
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs
- Qualcomm TCSR: Add compatible for Shikra
- Qualcomm TCSR: Document the IPQ9650 TCSR block
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be
st,stmpe610)
- Syscon: Add ESWIN EIC7700 compatible
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id
- Syscon: Disallow simple-bus with syscon
- Syscon: Drop custom select for older dtschema
- TI OMAP USBHS TLL: Convert to DT schema"
* tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cs42l43: Fix regmap defaults ordering
dt-bindings: mfd: syscon: Allow syscon compatible for Loongson-2K0300 chip id
dt-bindings: mfd: syscon: Add ESWIN EIC7700 compatible
mfd: qnap-mcu: keep the reply buffer alive past a command timeout
dt-bindings: mfd: qcom,tcsr: Document the IPQ9650 TCSR block
mfd: macsmc: Fix key count endianness annotation
dt-bindings: mfd: qcom,spmi-pmic: Document haptics device
mfd: iqs62x: Reject zero-length firmware records
mfd: rave-sp: validate received frame payload lengths
mfd: sm501: Fix potential memory leaks during remove
mfd: viperboard: Fix native fields type in structures as little-endian
mfd: si476x-i2c: Get rid of duplicate NULL checks
dt-bindings: mfd: Convert OMAP USB TLL to DT schema
mfd: cgbc: Fix teardown ordering in cgbc_remove()
mfd: mt6397-core: Add mt6323 AUXADC support
dt-bindings: mfd: qcom,tcsr: Add compatible for Hawi and Maili SoCs
mfd: rohm: Factor out power button registration
mfd: ucb1x00: Convert Assabet gpio-keys to use software nodes
mfd: ucb1x00: Register software node for GPIO controller
mfd: cs42l43: Tidy up formatting on sdw_device_id table
...
Linus Torvalds [Thu, 27 Aug 2026 16:17:06 +0000 (09:17 -0700)]
Merge tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
(Lorenzo Stoakes)
Index MAP_PRIVATE file-backed folios by their anonymous page offset
to resolve confusion around reverse mapping for zeroed and CoW'd
file-backed memory.
Use this new VMA anonymous page offset tracking to eliminate index
conflicts and lay the foundation for scalable CoW performance
improvements.
- "promote mapped executable folios after first usage for MGLRU"
(Baolin Wang)
Make MGLRU's protection of mapped executable file folios more
reliable. Follow the classical LRU's logic, promoting mapped
executable file folios after their first usage to give executable
code a better chance to stay in memory and improve workload
performance.
Fix per-node proactive reclaim interface's ignoring the swappiness
parameter when CONFIG_MEMCG is disabled by consolidating
sc_swappiness() into a single function that checks
proactive_swappiness regardless of kernel configuration.
Reduce lru_lock contention in the reclaim path by deriving
scan-balance costs from vmstat counters rather than lock-acquired
producer updates.
Read and decay these cost signals on the reclaim side under a
dedicated per-lruvec lock, reducing total LRU lock wait time by over
60% without impacting scan throughput.
- "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)
Fix two low-risk zram bugs which Sashiko spotted in drive-by review.
- "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
memcg" (Zi Yan)
Fix xas_split_alloc() by enabling target folio memcg charging during
splits and adding the missing __GFP_ACCOUNT flag for proper XArray
node memory accounting.
- "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)
Replace hardcoded binary names in selftests/mm/.gitignore with a
generic pattern-matching rule to automatically ignore generated test
files and avoid manual updates when adding new tests.
Clean up zram compression backends by removing redundant error
cleanup, adding parameter and dictionary validation, auto-prefixing
algorithm error logs, and resetting parameters prior to
reinitialization.
- "zram: fix stale scan bounds after reinitialization" (Longlong Xia)
Prevent out-of-bounds slot accesses during concurrent zram resets by
moving table scan bound calculations under dev_lock in
writeback_store() and read_block_state().
- "add anon mTHP collapse test cases" (Baolin Wang)
Extend selftests helper functions to support arbitrary page orders
and add new test cases and options for mTHP collapse in khugepaged.
- "selftests/mm: Handle unsupported and transient test conditions"
(Muhammad Usama Anjum)
Update MM selftests to report a SKIP status instead of a failure when
required kernel or filesystem features are unsupported, while adding
retry logic for transient page migration errors.
- "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)
Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
and extend shrink_memcg() to support batch writeback for improved
writeback efficiency.
- "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
Baghdasaryan)
Introduce an IOCTL-based binary interface for memory allocation
profiling that enables kernel-side filtering before per-CPU counter
aggregation.
This eliminates the text-parsing overhead of /proc/allocinfo and
provides up to a 20x speedup by transferring only filtered allocation
data to userspace.
- "better block swap batching and a different take on swap_ops v5"
(Christoph Hellwig)
Refactor block swap I/O to use swap_iocb for batching instead of
single-bio requests and rebase the swap_ops interface, achieving
faster swap throughput during kernel builds.
Reduce false-positive kmemleak reports by combining two kmemleak
enhancements that add a second confirmation scan and a configurable
minimum unreferenced scan count module parameter.
- "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
(Breno Leitao)
Auto-scanning kernels can generate false-positive memory leak reports
on single scans, so this patch defaults min_unref_scans to 2 when
CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
confirming scan.
- "swap_ops updates" (Christoph Hellwig)
Batching I/O for synchronous swap devices causes performance
regressions and filesystem-based swap suffers from double-indirection
overhead. This series resolves both issues by reintroducing per-folio
writes for synchronous swap and allowing filesystems to directly
export their own swap_ops.
- "mm/khugepaged: several cleanups" (Nico Pache)
khugepaged accumulated redundant state-checking patterns and outdated
comments following mTHP integration. Introduce dedicated helpers for
PTE validation and event counting while refreshing the internal
documentation.
- "maple_tree: lock checking and clean ups" (Liam Howlett)
Syzbot reports incorrectly blame memory management exit paths for
locking bugs, maple tree erase operations risk allocation failures
without gfp flags and internal documentation lacks clarity.
Improve lock error detection, update docs, fix race and allocation
edge cases and optimize erase allocations using a fallback to
GFP_KERNEL | GFP_NOFAIL.
* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
memcg: move LRU size accounting on reparenting instead of copying it
mm/vmscan: fix comment logic in balance_pgdat
maple_tree: add helper mas_make_walkable()
maple_tree: avoid extra gap calculation
maple_tree: fix argument name in header
maple_tree: change two GFP flags in tests
maple_tree: document erase and allocations better
maple_tree: avoid mas_erase() and mtree_erase() failures
maple_tree: document that erase may use GFP_KERNEL for allocations
maple_tree: catch race in mas_alloc_cyclic()
maple_tree: add bulk parent set helper
maple_tree: micro optimisation of mas_wr_store_type()
maple_tree: optimise mas_wr_node_store() when not in rcu mode
maple_tree: use prefetched value in mas_wr_store_type()
maple_tree: clarify comments on mas_nomem()
maple_tree: drop MAPLE_ALLOC_SLOTS
maple_tree: drop dead code from mas_extend_spanning_null()
maple_tree: documentation fix
maple_tree: add write lock checking with lockdep sequence numbers
...
Anoop Vijay [Tue, 25 Aug 2026 17:28:28 +0000 (10:28 -0700)]
drm/xe/sysctrl: Read mailbox phase bit from hardware
The mailbox PHASE bit in SYSCTRL_MB_CTRL is toggled per-message and
was tracked in software as sc->phase_bit, reset to 0 on error paths.
If the cached value ever drifts from what the hardware last saw, all
following messages carry the wrong phase and get silently misread by
firmware.
Drop the cache and read PHASE directly from SYSCTRL_MB_CTRL before
each frame instead, removing xe_sysctrl_mailbox_init() and its call
sites along with it.
Heikki Krogerus [Tue, 11 Aug 2026 12:10:08 +0000 (14:10 +0200)]
drm/xe/i2c: Keep the i2c controller always enabled
Some platforms make an assumption that the i2c controller's
enabled state indicates also the power state of the
controller. This can create a problem when the controller is
in disabled state, because the hardware may assume
incorrectly that it is then also in low-power state.
To fix this, the controller is kept enabled by taking over
the IC_ENABLE register. The controller has to be disabled
when the configuration is updated and when the target
address or the slave address are assigned, so disabling it
when IC_CON, IC_TAR or IC_SAR registers are programmed, and
then re-enabling it again.
Heikki Krogerus [Tue, 11 Aug 2026 12:10:07 +0000 (14:10 +0200)]
drm/xe/i2c: Fix the interrupt handling
The platforms that support the interrupt from the I2C
adapter can not handle the amount of interrupts the adapter
generates because of the way the IRQ is routed in the
hardware. The I2C controller driver has to be kept in
polling mode because of that.
The AMC MCU can still generate critical alerts that have to
be handled. The interrupt from SMBus Alert is left enabled
and handled separately in the Xe. The alerts from the AMC
will cause the device to be declared wedged for now.
Fixes: f0e53aadd702 ("drm/xe: Support for I2C attached MCUs") Cc: stable@vger.kernel.org Reviewed-by: Raag Jadav <raag.jadav@intel.com> Co-developed-by: Ramesh Babu B <ramesh.babu.b@intel.com> Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260811121008.1493015-3-heikki.krogerus@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a55b76b8bc2c49b11d753c1c6d06ec3a2c61c85e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Heikki Krogerus [Tue, 11 Aug 2026 12:10:06 +0000 (14:10 +0200)]
i2c: designware: Global register definitions
Moving the register definitions to a global header file
include/linux/designware_i2c.h. That removes the need to
duplicate them in the adaptation layers for this driver
outside of drivers/i2c/busses/. There is at least one of
those in drivers/gpu/drm/xe/xe_i2c.c.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://patch.msgid.link/20260811121008.1493015-2-heikki.krogerus@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ab2fb31411a494e4579dfacda986a2672f80e65) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
The combination of checksum offload disabled (that causes software GSO)
and a debug kernel is inherently slow. Depending on the CPU power and
load, RTT may increase, limiting sk_pacing_rate, so tcp_tso_autosize
caps SKBs at around 40 segments, and zero BIG TCP packets are produced.
Increase sysctl net.ipv4.tcp_min_tso_segs and set a bigger initial value
of CWND in these configurations to force BIG TCP.
Fixes: 5cb53743e1ff ("selftests: net: Add a test for BIG TCP in UDP tunnels") Signed-off-by: Alice Mikityanska <alice@isovalent.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260822120308.1165200-5-alice.kernel@fastmail.im Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
With checksum offload disabled, much fewer BIG TCP packets are generated
due to overall loss of throughput. Use a separate threshold in these
tests, which is 1/10 of the threshold set for the rest of tests.
Fixes: 5cb53743e1ff ("selftests: net: Add a test for BIG TCP in UDP tunnels") Signed-off-by: Alice Mikityanska <alice@isovalent.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260822120308.1165200-4-alice.kernel@fastmail.im Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: Lower threshold on debug kernels for big_tcp_tunnels.sh
Debug kernels on upstream CI runners run slower and generate fewer BIG
TCP packets, making the test flaky on upstream CI runners. Lower the
default threshold for those kernels.
Fixes: 5cb53743e1ff ("selftests: net: Add a test for BIG TCP in UDP tunnels") Signed-off-by: Alice Mikityanska <alice@isovalent.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260822120308.1165200-3-alice.kernel@fastmail.im Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use wait_local_port_listen after starting netserver in
big_tcp_tunnels.sh to ensure it's listening when the test starts.
Fixes: 5cb53743e1ff ("selftests: net: Add a test for BIG TCP in UDP tunnels") Signed-off-by: Alice Mikityanska <alice@isovalent.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260822120308.1165200-2-alice.kernel@fastmail.im Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Pawlik [Thu, 20 Aug 2026 08:59:40 +0000 (10:59 +0200)]
net: airoha: npu: fix missing streaming DMA mask
The driver calls dma_set_coherent_mask() but never dma_set_mask(),
leaving the streaming DMA mask at the bus default. On the non-coherent
EN7581 platform (Cortex-A53), this causes the NPU mailbox to hang
after approximately 41 calls when using streaming DMA mappings.
Replace dma_set_coherent_mask() with dma_set_mask_and_coherent() to
set both the streaming and coherent DMA masks, matching standard
driver practice.
of: fix out-of-bounds read in of_alias_scan() stem parser
The stem parser tests isdigit(*(end - 1)) before checking end > start
and so reads one byte before the property name when the name is empty
or all digits. Check the bound first.
The arm64 selftest collection has no Kconfig fragment, so kernels built
with the selftest requirements are not guaranteed to provide the support
used by these tests.
Add a fragment covering all tests in arm64.
Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
The MTE prctl test emits one result from check_basic_read() followed by
one result for each of the seven entries in mte_modes[]. However, the TAP
plan only accounts for the array entries, producing:
# Planned tests != run tests (7 != 8)
Include the basic read check in the plan so that all eight emitted results
are declared.
Reviewed-by: Mark Brown <broonie@kernel.org> Fixes: 1f488fb91378 ("kselftest/arm64/mte: Add MTE_STORE_ONLY testcases") Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
selftests/arm64: Treat KSM merge_across_nodes as optional
The MTE KSM test requires write access to KSM sysfs but does not check
that it is running as root. It also unconditionally saves, enables and
restores the merge_across_nodes attribute. The kernel only creates this
attribute when CONFIG_NUMA=y, so a non-NUMA kernel prints the following
message three times even though every KSM subtest passes:
Skip the test when it is not running as root. Check that the optional
attribute is readable and writable, treating ENOENT as its expected
absence on non-NUMA kernels and skipping the test for other access
failures. Only save, enable and restore the attribute when it is
available.
Check MTE availability before the privilege and sysfs checks so systems
without MTE retain the existing feature-unavailable skip result.
This preserves the existing behavior on NUMA kernels without requiring
NUMA or reducing KSM coverage on single-node systems.
Fixes: f981d8fa2646 ("kselftest/arm64: Verify KSM page merge for MTE pages") Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
Most MTE tests set a TAP plan and emit results without first printing
the TAP version header. Direct execution therefore starts with a plan
such as "1..20" instead of "TAP version 13".
The problem is particularly visible in the GCR_EL1 context-switch test.
It prints its plan before forking 1,024 child processes. When stdout is
fully buffered, the plan remains in the stdio buffer. Each child inherits
the pending "1..1" line and flushes its copy from exit(), producing
repeated plan lines.
ksft_print_header() prints the TAP header and enables line buffering.
Call it in every MTE test that is missing it. In the GCR_EL1 test, call
it before the plan so the plan is flushed before the children are
forked. In the remaining tests, call it before setup and prerequisite
checks so early failures and whole-test skips also retain the header.
Fixes: 29f080881601 ("kselftest/arm64: check GCR_EL1 after context switch") Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
The compat alignment emulator inherited unsigned long data addresses from
the 32-bit ARM implementation.
In do_alignment_ldmstm(), nr_regs is an unsigned int holding the transfer
size. The function uses the same address addition for both transfer
directions, negating nr_regs first for a decrementing LDM or STM. The
32-bit negation wraps before the addition, so the handler adds nearly
4 GiB instead of subtracting the transfer size.
The resulting address lies outside the compat task's address space, so
decrementing LDM/STM emulation fails, while incrementing forms work.
For example, a backwards-moving copy routine using decrementing LDM/STM can
take an alignment fault when called with unaligned pointers. The compat
handler should emulate the transfer, but this bug instead causes SIGBUS.
The offset negated in do_alignment_finish_ldst() is offset_union.un, which
is already unsigned long and does not have this width mismatch.
Make nr_regs unsigned long so its negation and the address arithmetic
use the same width.
Fixes: 3fc24ef32d3b ("arm64: compat: Implement misalignment fixups for multiword loads") Cc: stable@vger.kernel.org Suggested-by: Arnd Bergmann <arnd@arndb.de> Assisted-by: Codex:gpt-5.6-sol Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
Takashi Iwai [Thu, 27 Aug 2026 14:15:47 +0000 (16:15 +0200)]
Merge tag 'asoc-fix-v7.3-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.3
A fairly big batch of fixes that came in during the merge window.
There's a lot of quirks for x86 systems and a bunch of driver specific
fixes, the most critical being the fixes for Tegra's register
definitions. It turned out that they had been relying on the regmap
default handling bugs that were fixed in v7.2 and so audio was fairly
badly broken, unfortunately the issue wasn't noticed in time for
release.
Takashi Iwai [Thu, 27 Aug 2026 11:39:03 +0000 (13:39 +0200)]
ALSA: control: Don't add invalid kcontrols to LED layer
The kcontrol LED state layer tries to track the all associated
kcontrol elements with naive assumptions that they are readable.
But one can create a write-only element that has no get callback (even
a user element can do it), and this may lead to a NULL dereference at
the call chain of snd_ctl_led_notify(), as found by syzkaller.
For avoiding the Oops, add a sanity check of the kcontrol's info and
get callbacks, and just skip the invalid kcontrols before assigning
the kctl to the LED layer.
Reported-by: syzbot+b7fe2760ea6f1ee44b4d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6a9007b3.1d9ded08.62e62.00cd.GAE@google.com Fixes: 22d8de62f11b ("ALSA: control - add generic LED trigger module as the new control layer") Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260827113951.893291-1-tiwai@suse.de
netfilter: nf_tables: set on dead bit when performing early element removal
.commit call for sets is skipped if set->dead flag is set on, but this
flag is set on later in the commit path.
This also reintroduces the bug fixed in commit 7315dc1e122c8
("netfilter: nf_tables: skip set commit for deleted/destroyed sets").
Fixes: 1e3b9e1c77fe ("netfilter: nf_tables: call set ops .commit when building new ruleset blob") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: skip double clone set expressions on element insert
Both the dynset and newsetelem path clone the existing set expressions
when setting set element expressions if no override expressions are
provided. This results in a double clone, once to clone the template set
expressions then another clone on the new element. Add a flag to
annotate if userspace provides a override expression (ie. expression of
the same type of the set but different configuration), otherwise borrow
the existing expression from the set. Add conditionals to release
expression iif they represent an override. Use this new override_exprs
flag to dump the dynset expression override to userspace.
This simplifies the existing logic and it also fixes a bug with the
connlimit expression which results in a module refcount imbalance
WARNING splat when resorting on the default set expressions.
Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Fixes: fca05d4d61e6 ("netfilter: nft_dynset: honor stateful expressions in set definition") Reported-by: Xingyuan Mo <hdthky0@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove pr_debug() for these xtables extensions, these have no use
these days. Still, turn pr_debug() into pr_info_ratelimited() in the
.checkentry path since this helps provide a hint via dmesg in legacy
iptables.
Exception is xt_IDLETIMER in the module init path, where pr_err() is
used.
Add missing pr_fmt() definition in xt_REDIRECT, xt_NETMAP and
xt_MASQUERADE.
Add missing \n to several pr_debug() that were translated to use
pr_info_ratelimited().
Since pipapo_get_avx2() uses YMM registers, execute vzeroupper before
returning from it. This is needed to avoid degrading the performance of
any later SSE code that may happen to be executed.
netfilter: nf_tables: move hardware offload step after building the chain blob
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ.
Revert "ACPI: scan: Defer device power initialization"
Revert commit dc948f8b384a ("ACPI: scan: Defer device power
initialization") that is incomplete and may cause ACPI power
management of devices to fail.
The problem is that PCI devices are associated with the
corresponding ACPI device objects before acpi_bus_attach()
runs for them, so after commit dc948f8b384a, ACPI power
management will not be initialized for them before making
that association. Consequently, the reference counting of
ACPI power resources may not work as expected going forward
and power management issues may appear. If they appear, they
may be elusive and hard to diagnose.
While this is fixable, I am not sure if fixing it on top of
commit dc948f8b384a is the best way to go, so it is better to
revert that commit for now and revisit the whole thing in the
next cycle.
projects / linux / log