We hit an issue where a loop device on NFS was stuck in
loop_get_status() doing vfs_getattr() after the NFS server died, which
caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex.
There's no reason to hold this lock while we wait on the filesystem;
let's drop it so that other processes can do their thing. We need to
grab a reference on lo_backing_file while we use it, and we can get rid
of the check on lo_device, which has been unnecessary since commit a34c0ae9ebd6 ("[PATCH] loop: remove the bio remapping capability") in
the linux-history tree.
The Intel Bluetooth device 22560 family (HarrisonPeak, QnJ, and IcyPeak)
use the same firmware loading mechanism as previous generation,
so include new USB product ID and whitelist the hardware variant.
Hauppauge em28xx bulk devices exhibit continuity errors and corrupted
packets, when run in VMWare virtual machines. Unknown if other
manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected.
According to documentation the maximum packet multiplier for em28xx in bulk
transfer mode is 256 * 188 bytes. This changes the size of bulk transfers
to maximum supported value and have a bonus beneficial alignment.
Before:
After:
This sets up USB to expect just as many bytes as the em28xx is set to emit.
Successful usage under load afterwards natively and in both VMWare
and KVM/Qemu virtual machines.
Signed-off-by: Brad Love <brad@nextdimension.cc> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When used as an i2c device there is a module usage count mismatch on
removal, preventing the driver from being used thereafter. dvb_attach
increments the usage count so it is properly balanced on removal.
When handling an OS descriptor request, one of the first operations is
to zero out the request buffer using the wLength from the setup packet.
There is no bounds checking, so a wLength > 4096 would clobber memory
adjacent to the request buffer. Fix this by taking the min of wLength
and the request buffer length prior to the memset. While at it, define
the buffer length in a header file so that magic numbers don't appear
throughout the code.
When returning data to the host, the data length should be the min of
the wLength and the valid data we have to return. Currently we are
returning wLength, thus requests for a wLength greater than the amount
of data in the OS descriptor buffer would return invalid (albeit zero'd)
data following the valid descriptor data. Fix this by counting the
number of bytes when constructing the data and using this when
determining the length of the request.
Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using a AIO read() operation on the function FS gadget driver a URB is
submitted asynchronously and on URB completion the received data is copied
to the userspace buffer associated with the read operation.
This is done from a kernel worker thread invoking copy_to_user() (through
copy_to_iter()). And while the user space process memory is made available
to the kernel thread using use_mm(), some architecture require in addition
to this that the operation runs with USER_DS set. Otherwise the userspace
memory access will fail.
For example on ARM64 with Privileged Access Never (PAN) and User Access
Override (UAO) enabled the following crash occurs.
Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP
Modules linked in:
CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487
Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
Workqueue: events ffs_user_copy_worker
task: ffffffc87afc8080 task.stack: ffffffc87a00c000
PC is at __arch_copy_to_user+0x190/0x220
LR is at copy_to_iter+0x78/0x3c8
[...]
[<ffffff800847b790>] __arch_copy_to_user+0x190/0x220
[<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130
[<ffffff80080b8c64>] process_one_work+0x1dc/0x460
[<ffffff80080b8f38>] worker_thread+0x50/0x4b0
[<ffffff80080bf5a0>] kthread+0xd8/0xf0
[<ffffff8008083680>] ret_from_fork+0x10/0x50
Address this by placing a set_fs(USER_DS) before of the copy operation
and revert it again once the copy operation has finished.
This patch is analogous to commit d7ffde35e31a ("vhost: use USER_DS in
vhost_worker thread") which addresses the same underlying issue.
Some UDC drivers (like the DWC3) expect that the response to a setup()
request is queued from within the setup function itself so that it is
available as soon as setup() has completed.
Upon receiving a setup request the function fs driver creates an event that
is made available to userspace. And only once userspace has acknowledged
that event the response to the setup request is queued.
So it violates the requirement of those UDC drivers and random failures can
be observed. This is basically a race condition and if userspace is able to
read the event and queue the response fast enough all is good. But if it is
not, for example because other processes are currently scheduled to run,
the USB host that sent the setup request will observe an error.
To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS
return code. If a setup() callback returns this value the UDC driver is
aware that response is not yet available and can uses the appropriate
methods to handle this case.
Since in the case of function fs the response will never be available when
the setup() function returns make sure that this status code is used.
This fixed random occasional failures that were previously observed on a
DWC3 based system under high system load.
Added missing GUSBCFG programming in host mode, which fixes
transaction errors issue on HiKey and Altera Cyclone V boards.
These field even if was programmed in device mode (in function
dwc2_hsotg_core_init_disconnected()) will be resetting to POR values
after core soft reset applied.
So, each time when switching to host mode required to set this field
to correct value.
set udev->slot_id to zero when disabling and freeing the xhci slot.
Prevents usb core from calling xhci with a stale slot id.
xHC controller may be reset during resume to recover from some error.
All slots are unusable as they are disabled and freed.
xhci driver starts slot enumeration again from 1 in the order they are
enabled. In the worst case a stale udev->slot_id for one device matches
a newly enabled slot_id for a different device, causing us to
perform a action on the wrong device.
If building a kernel without FTRACE but with TRACING, dwc3.ko fails to
link due to missing trace events. Fix this by using the correct
Kconfig symbol on Makefile.
Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST
bit is cleared, we must wait at least 50ms before accessing the PHY
domain (synchronization delay).
Add native DSD support quirk for Luxman DA-06 DAC, by adding the
PID/VID 1852:5065.
Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()"
to cover broader device family sharing the same USB audio
implementation(*).
For the same reason, rename "is_teac_dsd_dac()" function to
"is_itf_usb_dsd_3alts_dac()".
(*)
These devices have the same USB controller "ITF-USB DSD", supplied by
INTERFACE Co., Ltd.
"ITF-USB DSD" USB controller has two patterns,
Pattern 1. (2 altsets version)
- Altset 0: for control
- Altset 1: for stream (S32)
- Altset 2: for stream (S32, DSD_U32)
Pattern 2. (3 altsets version)
- Altset 0: for control
- Altset 1: for stream (S16)
- Altset 2: for stream (S32)
- Altset 3: for stream (S32, DSD_U32)
"is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1"
USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if
"Pattern2".
zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's
rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen
adapter ERP action via zfcp_erp_action_enqueue(). Both are separately
processed asynchronously and concurrently.
Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It
calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via
zfcp_dbf_rec_trig(). zfcp_dbf_rec_trig() acquires the DBF REC spin lock
and then iterates with list_for_each() over the adapter's ERP ready list
without holding the ERP lock. This opens a race window in which the
current list entry can be moved to another list, causing list_for_each()
to iterate forever on the wrong list, as the erp_ready_head is never
encountered as terminal condition.
Meanwhile the ERP action can be processed in the ERP thread by
zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP
lock and then calls zfcp_erp_action_to_running() to move the ERP action
from the ready to the running list. zfcp_erp_action_to_running() can
move the ERP action using list_move() just during the aforementioned
race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run().
zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is
held by the infinitely looping kworker, it effectively spins forever.
Any adapter recovery can trigger this, such as setting the device offline
or reboot.
V4.9 commit 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport
during rport gone") introduced additional tracing of (un)blocking of
rports. It missed that the adapter->erp_lock must be held when calling
zfcp_dbf_rec_trig().
This fix uses the approach formerly introduced by commit aa0fec62391c
("[SCSI] zfcp: Fix sparse warning by providing new entry in dbf") that got
later removed by commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.").
Introduce zfcp_dbf_rec_trig_lock(), a wrapper for zfcp_dbf_rec_trig() that
acquires and releases the adapter->erp_lock for read.
Reported-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Fixes: 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport during rport gone") Cc: <stable@vger.kernel.org> # 2.6.32+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This shall help avoid copying uninitialized memory to the userspace when
calling ioctl(fd, SG_IO) with an empty command.
Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx
assembler stubs and the indirect branches generated by the JIT itself
need to be converted to expolines.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nospec-branch.c file is compiled without the gcc options to
generate expoline thunks. The return branch of the sysfs show
functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect
branch as well. These need to be compiled with expolines.
Move the sysfs functions for spectre reporting to a separate file
and loose an '.' for one of the messages.
Cc: stable@vger.kernel.org # 4.16 Fixes: d424986f1d ("s390: add sysfs attributes for spectre") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the ftrace_stub, _mcount, ftrace_caller and
return_to_handler functions is done with "br %r14" and "br %r1".
These are indirect branches as well and need to use execute
trampolines for CONFIG_EXPOLINE=y.
The ftrace_caller function is a special case as it returns to the
start of a function and may only use %r0 and %r1. For a pre z10
machine the standard execute trampoline uses a LARL + EX to do
this, but this requires *two* registers in the range %r1..%r15.
To get around this the 'br %r1' located in the lowcore is used,
then the EX instruction does not need an address register.
But the lowcore trick may only be used for pre z14 machines,
with noexec=on the mapping for the first page may not contain
instructions. The solution for that is an ALTERNATIVE in the
expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to
EXRL, this relies on the fact that a machine that supports
noexec=on has EXRL as well.
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the memmove, memset, memcpy, __memset16, __memset32 and
__memset64 functions are done with "br %r14". These are indirect branches
as well and need to use execute trampolines for CONFIG_EXPOLINE=y.
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the
crc32_be_vgfm_16 functions are done with "br %r14". These are indirect
branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y.
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main linker script vmlinux.lds.S for the kernel image merges
the expoline code patch tables into two section ".nospec_call_table"
and ".nospec_return_table". This is *not* done for the modules,
there the sections retain their original names as generated by gcc:
".s390_indirect_call", ".s390_return_mem" and ".s390_return_reg".
The module_finalize code has to check for the compiler generated
section names, otherwise no code patching is done. This slows down
the module code in case of "spectre_v2=off".
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With CONFIG_EXPOLINE_AUTO=y the call of spectre_v2_auto_early() via
early_initcall is done *after* the early_param functions. This
overwrites any settings done with the nobp/no_spectre_v2/spectre_v2
parameters. The code patching for the kernel is done after the
evaluation of the early parameters but before the early_initcall
is done. The end result is a kernel image that is patched correctly
but the kernel modules are not.
Make sure that the nospec auto detection function is called before the
early parameters are evaluated and before the code patching is done.
Fixes: 6e179d64126b ("s390: add automatic detection of the spectre defense") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a header with macros usable in assembler files to emit alternative
code sequences. It works analog to the alternatives for inline assmeblies
in C files, with the same restrictions and capabilities.
The syntax is
ALTERNATIVE "<default instructions sequence>", \
"<alternative instructions sequence>", \
"<features-bit>"
and
Add a boot message if either of the spectre defenses is active.
The message is
"Spectre V2 mitigation: execute trampolines."
or "Spectre V2 mitigation: limited branch prediction."
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some CPUs we can prevent a vulnerability related to store-to-load
forwarding by preventing store forwarding between privilege domains,
by inserting a barrier in kernel entry and exit paths.
This is known to be the case on at least Power7, Power8 and Power9
powerpc CPUs.
Barriers must be inserted generally before the first load after moving
to a higher privilege, and after the last store before moving to a
lower privilege, HV and PR privilege transitions must be protected.
Barriers are added as patch sections, with all kernel/hypervisor entry
points patched, and the exit points to lower privilge levels patched
similarly to the RFI flush patching.
Firmware advertisement is not implemented yet, so CPU flush types
are hard coded.
Thanks to Michal Suchánek for bug fixes and review.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michal Suchánek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This clears H_CPU_BEHAV_FAVOUR_SECURITY and H_CPU_BEHAV_L1D_FLUSH_PR
so pseries_setup_rfi_flush() disables 'rfi_flush'; and it also
clears H_CPU_CHAR_L1D_THREAD_PRIV flag. So there is no RFI flush
mitigation at all for cpu_show_meltdown() to report; but currently
it does:
Add a definition for cpu_show_spectre_v2() to override the generic
version. This has several permuations, though in practice some may not
occur we cater for any combination.
We don't treat the ori31 speculation barrier as a mitigation on its
own, because it has to be *used* by code in order to be a mitigation
and we don't know if userspace is doing that. So if that's all we see
we say:
Vulnerable, ori31 speculation barrier enabled
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a definition for cpu_show_spectre_v1() to override the generic
version. Currently this just prints "Not affected" or "Vulnerable"
based on the firmware flag.
Although the kernel does have array_index_nospec() in a few places, we
haven't yet audited all the powerpc code to see where it's necessary,
so for now we don't list that as a mitigation.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have the security flags we can significantly simplify the
code in pnv_setup_rfi_flush(), because we can use the flags instead of
checking device tree properties and because the security flags have
pessimistic defaults.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This landed in setup_64.c for no good reason other than we had nowhere
else to put it. Now that we have a security-related file, that is a
better place for it so move it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds security feature flags to reflect the settings we
receive from firmware regarding Spectre/Meltdown mitigations.
The feature names reflect the names we are given by firmware on bare
metal machines. See the hostboot source for details.
Arguably these could be firmware features, but that then requires them
to be read early in boot so they're available prior to asm feature
patching, but we don't actually want to use them for patching. We may
also want to dynamically update them in future, which would be
incompatible with the way firmware features work (at the moment at
least). So for now just make them separate flags.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This ensures the fallback flush area is always allocated on pseries,
so in case a LPAR is migrated from a patched to an unpatched system,
it is possible to enable the fallback flush in the target system.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
open file, unlink it, then use ioctl(2) to make it immutable or
append only. Now close it and watch the blocks *not* freed...
Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().
Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.
This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.
Fixes: 1d6cff4fca4366 ("qed: Add iSCSI out of order packet handling") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.
Fixes: 1d6cff4fca4366 ("qed: Add iSCSI out of order packet handling") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently ip6gre and ip6erspan share single metadata mode device,
using 'collect_md_tun'. Thus, when doing:
ip link add dev ip6gre11 type ip6gretap external
ip link add dev ip6erspan12 type ip6erspan external
RTNETLINK answers: File exists
simply fails due to the 2nd tries to create the same collect_md_tun.
The patch fixes it by adding a separate collect md tunnel device
for the ip6erspan, 'collect_md_tun_erspan'. As a result, a couple
of places need to refactor/split up in order to distinguish ip6gre
and ip6erspan.
First, move the collect_md check at ip6gre_tunnel_{unlink,link} and
create separate function {ip6gre,ip6ersapn}_tunnel_{link_md,unlink_md}.
Then before link/unlink, make sure the link_md/unlink_md is called.
Finally, a separate ndo_uninit is created for ip6erspan. Tested it
using the samples/bpf/test_tunnel_bpf.sh.
Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode") Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though ip6erspan_tap_init() sets up hlen and tun_hlen according to
what ERSPAN needs, it goes ahead to call ip6gre_tnl_link_config() which
overwrites these settings with GRE-specific ones.
Similarly for changelink callbacks, which are handled by
ip6gre_changelink() calls ip6gre_tnl_change() calls
ip6gre_tnl_link_config() as well.
The difference ends up being 12 vs. 20 bytes, and this is generally not
a problem, because a 12-byte request likely ends up allocating more and
the extra 8 bytes are thus available. However correct it is not.
So replace the newlink and changelink callbacks with an ERSPAN-specific
ones, reusing the newly-introduced _common() functions.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract from ip6gre_changelink() a reusable function
ip6gre_changelink_common(). This will allow introduction of
ERSPAN-specific _changelink() function with not a lot of code
duplication.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract from ip6gre_newlink() a reusable function
ip6gre_newlink_common(). The ip6gre_tnl_link_config() call needs to be
made customizable for ERSPAN, thus reorder it with calls to
ip6_tnl_change_mtu() and dev_hold(), and extract the whole tail to the
caller, ip6gre_newlink(). Thus enable an ERSPAN-specific _newlink()
function without a lot of duplicity.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split a reusable function ip6gre_tnl_copy_tnl_parm() from
ip6gre_tnl_change(). This will allow ERSPAN-specific code to
reuse the common parts while customizing the behavior for ERSPAN.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ip6gre_tnl_link_config() is used for setting up
configuration of both ip6gretap and ip6erspan tunnels. Split the
function into the common part and the route-lookup part. The latter then
takes the calculated header length as an argument. This split will allow
the patches down the line to sneak in a custom header length computation
for the ERSPAN tunnel.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts
out zero. Thus the call to skb_cow_head() fails to actually make sure
there's enough headroom to push the ERSPAN headers to. That can lead to
the panic cited below. (Reproducer below that).
Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.
Fixes: e41c7c68ea77 ("ip6erspan: make sure enough headroom at xmit.") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit()
for generic IP-in-IP processing. However it doesn't make sure that there
is enough headroom to push the header to. That can lead to the panic
cited below. (Reproducer below that).
Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.
Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gen bits must be read first from (resp. written last to) DMA memory.
The proper way to enforce this on Linux is to call dma_rmb() (resp.
dma_wmb()).
Signed-off-by: Regis Duchesne <hpreg@vmware.com> Acked-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA mask must be set before, not after, the first DMA map operation, or
the first DMA map operation could in theory fail on some systems.
Fixes: b0eb57cb97e78 ("VMXNET3: Add support for virtual IOMMU") Signed-off-by: Regis Duchesne <hpreg@vmware.com> Acked-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the indirect register offsets in collecting TX rate limit info
in UP CIM logs.
Also, T5 doesn't support these indirect register offsets, so remove
them from collection logic.
Fixes: be6e36d916b1 ("cxgb4: collect TX rate limit info in UP CIM logs") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver supports EISA devices in addition to PCI devices, and relied
on the legacy behavior of the pci_dma* shims to pass on a NULL pointer
to the DMA API, and the DMA API being able to handle that. When the
NULL forwarding broke the EISA support got broken. Fix this by converting
to the DMA API instead of the legacy PCI shims.
Fixes: 4167b2ad ("PCI: Remove NULL device handling from PCI DMA API") Reported-by: tedheadster <tedheadster@gmail.com> Tested-by: tedheadster <tedheadster@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was possible to delete only one half of an IPv6, which would leave
the second half still programmed and possibly in use. Instead of
checking for the unused bitmap, we need to check the unique bitmap, and
refuse any deletion that does not match that criteria. We also need to
move that check from bcm_sf2_cfp_rule_del_one() into its caller:
bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second
halves anymore that would not pass the first test.
Fixes: ba0696c22e7c ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We had several issues that would make the programming of IPv6 rules both
inconsistent and error prone:
- the chain ID that we would be asking the hardware to put in the
packet's Broadcom tag would be off by one, it would return one of the
two indexes, but not the one user-space specified
- when an user specified a particular location to insert a CFP rule at,
we would not be returning the same index, which would be confusing if
nothing else
- finally, like IPv4, it would be possible to overflow the last entry by
re-programming it
Fix this by swapping the usage of rule_index[0] and rule_index[1] where
relevant in order to return a consistent and correct user-space
experience.
Fixes: ba0696c22e7c ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if commit 1d27732f411d ("net: dsa: setup and teardown ports") indicated
that registering a devlink instance for unused ports is not a problem, and this
is true, this can be confusing nonetheless, so let's not do it.
Fixes: 1d27732f411d ("net: dsa: setup and teardown ports") Reported-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we
would be able to overwrite the last rules because of a number of issues.
The IPv4 code path would not be checking that rule_index is within
bounds, and it would also only be allowed to pick up rules from range
0..126 instead of the full 0..127 range. This would lead us to allow
overwriting the last rule when we let the kernel pick-up the location.
Fixes: 3306145866b6 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Earlier code of doing bitwise AND with field width bits was wrong.
Instead, simplify code to calculate ntuple_mask based on supplied
fields and then compare with mask configured in hw - which is the
correct and simpler way to validate ntuple mask.
Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit b196d88aba8a ("tun: fix use after free for ptr_ring") we
need clean up tx ring during release(). But unfortunately, it tries to
do the cleanup blindly after socket were destroyed which will lead
another use-after-free. Fix this by doing the cleanup before dropping
the last reference of the socket in __tun_detach().
Reported-by: Andrei Vagin <avagin@virtuozzo.com> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Fixes: b196d88aba8a ("tun: fix use after free for ptr_ring") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We used to initialize ptr_ring during TUNSETIFF, this is because its
size depends on the tx_queue_len of netdevice. And we try to clean it
up when socket were detached from netdevice. A race were spotted when
trying to do uninit during a read which will lead a use after free for
pointer ring. Solving this by always initialize a zero size ptr_ring
in open() and do resizing during TUNSETIFF, and then we can safely do
cleanup during close(). With this, there's no need for the workaround
that was introduced by commit 4df0bfc79904 ("tun: fix a memory leak
for tfile->tx_array").
Reported-by: syzbot+e8b902c3c3fadf0a9dba@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We must not call sock_diag_has_destroy_listeners(sk) on a socket
that has no reference on net structure.
BUG: KASAN: use-after-free in sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline]
BUG: KASAN: use-after-free in __sk_free+0x329/0x340 net/core/sock.c:1609
Read of size 8 at addr ffff88018a02e3a0 by task swapper/1/0
Packet sockets allow construction of packets shorter than
dev->hard_header_len to accommodate protocols with variable length
link layer headers. These packets are padded to dev->hard_header_len,
because some device drivers interpret that as a minimum packet size.
packet_snd reserves dev->hard_header_len bytes on allocation.
SOCK_DGRAM sockets call skb_push in dev_hard_header() to ensure that
link layer headers are stored in the reserved range. SOCK_RAW sockets
do the same in tpacket_snd, but not in packet_snd.
Syzbot was able to send a zero byte packet to a device with massive
116B link layer header, causing padding to cross over into skb_shinfo.
Fix this by writing from the start of the llheader reserved range also
in the case of packet_snd/SOCK_RAW.
Update skb_set_network_header to the new offset. This also corrects
it for SOCK_DGRAM, where it incorrectly double counted reserve due to
the skb_push in dev_hard_header.
Fixes: 9ed988cd5915 ("packet: validate variable length ll headers") Reported-by: syzbot+71d74a5406d02057d559@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device features may change during transmission. In particular with
corking, a device may toggle scatter-gather in between allocating
and writing to an skb.
Do not unconditionally assume that !NETIF_F_SG at write time implies
that the same held at alloc time and thus the skb has sufficient
tailroom.
This issue predates git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible to crash the kernel in several different ways by sending
messages to the SMC_PNETID generic netlink family that are missing the
expected attributes:
- Missing SMC_PNETID_NAME => null pointer dereference when comparing
names.
- Missing SMC_PNETID_ETHNAME => null pointer dereference accessing
smc_pnetentry::ndev.
- Missing SMC_PNETID_IBNAME => null pointer dereference accessing
smc_pnetentry::smcibdev.
- Missing SMC_PNETID_IBPORT => out of bounds array access to
smc_ib_device::pattr[-1].
Fix it by validating that all expected attributes are present and that
SMC_PNETID_IBPORT is nonzero.
Reported-by: syzbot+5cd61039dc9b8bfa6e47@syzkaller.appspotmail.com Fixes: 6812baabf24d ("smc: establish pnet table management") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a red qdisc is updated with a 0 limit, the child qdisc is left
unmodified, no additional scheduler is created in red_change(),
the 'child' local variable is rightfully NULL and must not add it
to the hash table.
This change addresses the above issue moving qdisc_hash_add() right
after the child qdisc creation. It additionally removes unneeded checks
for noop_qdisc.
Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 49b499718fa1 ("net: sched: make default fifo qdiscs appear in the dump") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similarly to what was done with commit a52956dfc503 ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.
Fixes: 5026c9b1bafc ("net sched: vlan action fix late binding") CC: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid exiting the function with a lingering sysfs file (if the first
call to device_create_file() fails while the second succeeds), and avoid
calling devlink_port_unregister() twice.
In other words, either mlx4_init_port_info() succeeds and returns zero, or
it fails, returns non-zero, and requires no cleanup.
Fixes: 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While removing queues from the XPS map, the individual CPU ID
alone was used to index the CPUs map, this should be changed to also
factor in the traffic class mapping for the CPU-to-queue lookup.
Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid using the kernel's irq_descriptor and return IRQ vector affinity
directly from the driver.
This fixes the following build break when CONFIG_SMP=n
include/linux/mlx5/driver.h: In function ‘mlx5_get_vector_affinity_hint’:
include/linux/mlx5/driver.h:1299:13: error:
‘struct irq_desc’ has no member named ‘affinity_hint’
Fixes: 6082d9c9c94a ("net/mlx5: Fix mlx5_get_vector_affinity function") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> CC: Randy Dunlap <rdunlap@infradead.org> CC: Guenter Roeck <linux@roeck-us.net> CC: Thomas Gleixner <tglx@linutronix.de> Tested-by: Israel Rukshin <israelr@mellanox.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM. This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.
[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the necessary logic for supporting the emulated VIRT_SPEC_CTRL MSR to
x86_virt_spec_ctrl(). If either X86_FEATURE_LS_CFG_SSBD or
X86_FEATURE_VIRT_SPEC_CTRL is set then use the new guest_virt_spec_ctrl
argument to check whether the state must be modified on the host. The
update reuses speculative_store_bypass_update() so the ZEN-specific sibling
coordination can be reused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86_spec_ctrL_mask is intended to mask out bits from a MSR_SPEC_CTRL value
which are not to be modified. However the implementation is not really used
and the bitmask was inverted to make a check easier, which was removed in
"x86/bugs: Remove x86_spec_ctrl_set()"
Aside of that it is missing the STIBP bit if it is supported by the
platform, so if the mask would be used in x86_virt_spec_ctrl() then it
would prevent a guest from setting STIBP.
Add the STIBP bit if supported and use the mask in x86_virt_spec_ctrl() to
sanitize the value which is supplied by the guest.
x86_spec_ctrl_set() is only used in bugs.c and the extra mask checks there
provide no real value as both call sites can just write x86_spec_ctrl_base
to MSR_SPEC_CTRL. x86_spec_ctrl_base is valid and does not need any extra
masking or checking.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86_spec_ctrl_base is the system wide default value for the SPEC_CTRL MSR.
x86_spec_ctrl_get_default() returns x86_spec_ctrl_base and was intended to
prevent modification to that variable. Though the variable is read only
after init and globaly visible already.
Remove the function and export the variable instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function bodies are very similar and are going to grow more almost
identical code. Add a bool arg to determine whether SPEC_CTRL is being set
for the guest or restored to the host.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The upcoming support for the virtual SPEC_CTRL MSR on AMD needs to reuse
speculative_store_bypass_update() to avoid code duplication. Add an
argument for supplying a thread info (TIF) value and create a wrapper
speculative_store_bypass_update_current() which is used at the existing
call site.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD). To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.
Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store
Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care
about the bit position of the SSBD bit and thus facilitate migration.
Also, the sibling coordination on Family 17H CPUs can only be done on
the host.
Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an
extra argument for the VIRT_SPEC_CTRL MSR.
Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU
data structure which is going to be used in later patches for the actual
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD64_LS_CFG MSR is a per core MSR on Family 17H CPUs. That means when
hyperthreading is enabled the SSBD bit toggle needs to take both cores into
account. Otherwise the following situation can happen:
CPU0 CPU1
disable SSB
disable SSB
enable SSB <- Enables it for the Core, i.e. for CPU0 as well
So after the SSB enable on CPU1 the task on CPU0 runs with SSB enabled
again.
On Intel the SSBD control is per core as well, but the synchronization
logic is implemented behind the per thread SPEC_CTRL MSR. It works like
this:
i.e. if one of the threads enables a mitigation then this affects both and
the mitigation is only disabled in the core when both threads disabled it.
Add the necessary synchronization logic for AMD family 17H. Unfortunately
that requires a spinlock to serialize the access to the MSR, but the locks
are only shared between siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux / log