The predicate code that iomap_unshare_iter uses to decide if it's really
needs to unshare a file range mapping should be shared with the fsdax
version, because right now they're opencoded and inconsistent.
Note that we simplify the predicate logic a bit -- we no longer allow
unsharing of inline data mappings, but there aren't any filesystems that
allow shared inline data currently.
This is a fix in the sense that it should have been ported to fsdax.
Fixes: b53fdb215d13 ("iomap: improve shared block detection in iomap_unshare_iter") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/172796813294.1131942.15762084021076932620.stgit@frogsfrogsfrogs Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 50793801fc7f ("fsdax: dax_unshare_iter needs to copy entire blocks") Signed-off-by: Sasha Levin <sashal@kernel.org>
If unshare encounters a delalloc reservation in the srcmap, that means
that the file range isn't shared because delalloc reservations cannot be
reflinked. Therefore, don't try to unshare them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20241002150040.GB21853@frogsfrogsfrogs Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 50793801fc7f ("fsdax: dax_unshare_iter needs to copy entire blocks") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently iomap_unshare_iter relies on the IOMAP_F_SHARED flag to detect
blocks to unshare. This is reasonable, but IOMAP_F_SHARED is also useful
for the file system to do internal book keeping for out of place writes.
XFS used to that, until it got removed in commit 72a048c1056a
("xfs: only set IOMAP_F_SHARED when providing a srcmap to a write")
because unshare for incorrectly unshare such blocks.
Add an extra safeguard by checking the explicitly provided srcmap instead
of the fallback to the iomap for valid data, as that catches the case
where we'd just copy from the same place we'd write to easily, allowing
to reinstate setting IOMAP_F_SHARED for all XFS writes that go to the
COW fork.
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240910043949.3481298-3-hch@lst.de Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 50793801fc7f ("fsdax: dax_unshare_iter needs to copy entire blocks") Signed-off-by: Sasha Levin <sashal@kernel.org>
Convert iomap_unshare_iter to create large folios if possible, since the
write and zeroing paths already do that. I think this got missed in the
conversion of the write paths that landed in 6.6-rc1.
Cc: ritesh.list@gmail.com, willy@infradead.org Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Stable-dep-of: 50793801fc7f ("fsdax: dax_unshare_iter needs to copy entire blocks") Signed-off-by: Sasha Levin <sashal@kernel.org>
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
There are two main differences between Spectrum-1 and newer ASICs in
terms of IP-in-IP support:
1. In Spectrum-1, RIFs representing ip6gre tunnels require two entries
in the RIF table.
2. In Spectrum-2 and newer ASICs, packets ingress the underlay (during
encapsulation) and egress the underlay (during decapsulation) via a
special generic loopback RIF.
The first difference was handled in previous patches by adding the
'double_rif_entry' field to the Spectrum-1 operations structure of
ip6gre RIFs. The second difference is handled during RIF creation, by
only creating a generic loopback RIF in Spectrum-2 and newer ASICs.
Therefore, the ip6gre operations can be shared between Spectrum-1 and
newer ASIC in a similar fashion to how the ipgre operations are shared.
Rename the operations to not be Spectrum-2 specific and move them
earlier in the file so that they could later be used for Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 12ae97c531fc ("mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address") Signed-off-by: Sasha Levin <sashal@kernel.org>
In Spectrum-1, loopback router interfaces (RIFs) used for IP-in-IP
encapsulation with an IPv6 underlay require two RIF entries and the RIF
index must be even.
Prepare for this change by extending the RIF parameters structure with a
'double_entry' field that indicates if the RIF being created requires
two RIF entries or not. Only set it for RIFs representing ip6gre tunnels
in Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 12ae97c531fc ("mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address") Signed-off-by: Sasha Levin <sashal@kernel.org>
Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. The cited commit moved the call to skb_cow_head() from
mlxsw_sp_port_xmit() to functions which handle Tx header.
In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx
header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is
no call for skb_cow_head() before pushing Tx header size to SKB. This flow
is relevant for Spectrum-1 and Spectrum-4, for PTP packets.
Add the missing call to skb_cow_head() to make sure that there is both
enough room to push the Tx header and that the SKB header is not cloned and
can be modified.
An additional set will be sent to net-next to centralize the handling of
the Tx header by pushing it to every packet just before transmission.
Cc: Richard Cochran <richardcochran@gmail.com> Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/5145780b07ebbb5d3b3570f311254a3a2d554a44.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.
This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.
But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).
The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.
Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it.
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8.
This was found by a static analyzer.
We should not forget the trailing zero after copy_from_user()
if we will further do some string operations, sscanf() in this
case. Adding a trailing zero will ensure that the function
performs properly.
In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed
to be either root or ingress. This assumption is bogus since it's valid
to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active
class list, it will cause a UAF with a dangling class pointer.
In 066a3b5b2346, the concern was to avoid iterating over the ingress
qdisc since its parent is itself. The proper fix is to stop when parent
TC_H_ROOT is reached because the only way to retrieve ingress is when a
hierarchy which does not contain a ffff: major handle call into
qdisc_lookup with TC_H_MAJ(TC_H_ROOT).
In the scenario where major ffff: is an egress qdisc in any of the tree
levels, the updates will also propagate to TC_H_ROOT, which then the
iteration must stop.
Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop") Reported-by: Budimir Markovic <markovicbudimir@gmail.com> Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
net/sched/sch_api.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-) Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024165547.418570-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.
For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.
The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;
On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(
In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.
This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.
Tested and verified on DWXGMAC CORE 3.20a
Reported-by: Suraj Jaiswal <quic_jsuraj@quicinc.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241021061023.2162701-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.
Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.
This behavior is the same as the one already in the .remove() function.
There is a race between the CREQ tasklet and destroy qp when accessing the
qp-handle table. There is a chance of reading a valid qp-handle in the
CREQ tasklet handler while the QP is already moving ahead with the
destruction.
Fixing this race by implementing a table-lock to synchronize the access.
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error") Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing") Link: https://patch.msgid.link/r/1728912975-19346-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6aba ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros") Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When tracing is disabled, there is no point in asking the user about
enabling Broadcom wireless device tracing.
Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>
On full monitor HW the monitor destination rxdma ring does not have the
same descriptor format as in the "classical" mode. The full monitor
destination entries are of hal_sw_monitor_ring type and fetched using
ath11k_dp_full_mon_process_rx while the classical ones are of type
hal_reo_entrance_ring and fetched with ath11k_dp_rx_mon_dest_process.
Although both hal_sw_monitor_ring and hal_reo_entrance_ring are of same
size, the offset to useful info (such as sw_cookie, paddr, etc) are
different. Thus if ath11k_dp_rx_mon_dest_process gets called on full
monitor destination ring, invalid skb buffer id will be fetched from DMA
ring causing issues such as the following rcu_sched stall:
iwlegacy uses command buffers with a payload size of 320
bytes (default) or 4092 bytes (huge). The struct il_device_cmd type
describes the default buffers and there is no separate type describing
the huge buffers.
The il_enqueue_hcmd() function works with both default and huge
buffers, and has a memcpy() to the buffer payload. The size of
this copy may exceed 320 bytes when using a huge buffer, which
now results in a run-time warning:
memcpy: detected field-spanning write (size 1014) of single field "&out_cmd->cmd.payload" at drivers/net/wireless/intel/iwlegacy/common.c:3170 (size 320)
To fix this:
- Define a new struct type for huge buffers, with a correctly sized
payload field
- When using a huge buffer in il_enqueue_hcmd(), cast the command
buffer pointer to that type when looking up the payload field
cgroup.max.depth is the maximum allowed descent depth below the current
cgroup. If the actual descent depth is equal or larger, an attempt to
create a new child cgroup will fail. However due to the cgroup->max_depth
is of int type and having the default value INT_MAX, the condition
'level > cgroup->max_depth' will never be satisfied, and it will cause
an overflow of the level after it reaches to INT_MAX.
Fix it by starting the level from 0 and using '>=' instead.
It's worth mentioning that this issue is unlikely to occur in reality,
as it's impossible to have a depth of INT_MAX hierarchy, but should be
be avoided logically.
When /proc/kcore is read an attempt to read the first two pages results in
HW-specific page swap on s390 and another (so called prefix) pages are
accessed instead. That leads to a wrong read.
Allow architecture-specific translation of memory addresses using
kc_xlate_dev_mem_ptr() and kc_unxlate_dev_mem_ptr() callbacks similarily
to /dev/mem xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() callbacks. That
way an architecture can deal with specific physical memory ranges.
Re-use the existing /dev/mem callback implementation on s390, which
handles the described prefix pages swapping correctly.
For other architectures the default callback is basically NOP. It is
expected the condition (vaddr == __va(__pa(vaddr))) always holds true for
KCORE_RAM memory type.
Some architectures do not populate the entire range categorised by
KCORE_TEXT, so we must ensure that the kernel address we read from is
valid.
Unfortunately there is no solution currently available to do so with a
purely iterator solution so reinstate the bounce buffer in this instance
so we can use copy_from_kernel_nofault() in order to avoid page faults
when regions are unmapped.
This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid
bounce buffer for ktext data"), reinstating the bounce buffer, but adapts
the code to continue to use an iterator.
[lstoakes@gmail.com: correct comment to be strictly correct about reasoning] Link: https://lkml.kernel.org/r/525a3f14-74fa-4c22-9fca-9dab4de8a0c3@lucifer.local Link: https://lkml.kernel.org/r/20230731215021.70911-1-lstoakes@gmail.com Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reported-by: Jiri Olsa <olsajiri@gmail.com> Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Will Deacon <will@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3d5854d75e31 ("fs/proc/kcore.c: allow translation of physical memory addresses") Signed-off-by: Sasha Levin <sashal@kernel.org>
For the time being we still use a bounce buffer for vread(), however in
the next patch we will convert this to interact directly with the iterator
and eliminate the bounce buffer altogether.
Link: https://lkml.kernel.org/r/ebe12c8d70eebd71f487d80095605f3ad0d1489c.1679511146.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3d5854d75e31 ("fs/proc/kcore.c: allow translation of physical memory addresses") Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "convert read_kcore(), vread() to use iterators", v8.
While reviewing Baoquan's recent changes to permit vread() access to
vm_map_ram regions of vmalloc allocations, Willy pointed out [1] that it
would be nice to refactor vread() as a whole, since its only user is
read_kcore() and the existing form of vread() necessitates the use of a
bounce buffer.
This patch series does exactly that, as well as adjusting how we read the
kernel text section to avoid the use of a bounce buffer in this case as
well.
This has been tested against the test case which motivated Baoquan's
changes in the first place [2] which continues to function correctly, as
do the vmalloc self tests.
This patch (of 4):
Commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data")
introduced the use of a bounce buffer to retrieve kernel text data for
/proc/kcore in order to avoid failures arising from hardened user copies
enabled by CONFIG_HARDENED_USERCOPY in check_kernel_text_object().
We can avoid doing this if instead of copy_to_user() we use
_copy_to_user() which bypasses the hardening check. This is more
efficient than using a bounce buffer and simplifies the code.
We do so as part an overall effort to eliminate bounce buffer usage in the
function with an eye to converting it an iterator read.
Most architectures (except arm64/x86/sparc) simply return 1 for
kern_addr_valid(), which is only used in read_kcore(), and it calls
copy_from_kernel_nofault() which could check whether the address is a
valid kernel address. So as there is no need for kern_addr_valid(), let's
remove it.
Link: https://lkml.kernel.org/r/20221018074014.185687-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390] Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Helge Deller <deller@gmx.de> [parisc] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: <aou@eecs.berkeley.edu> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3d5854d75e31 ("fs/proc/kcore.c: allow translation of physical memory addresses") Signed-off-by: Sasha Levin <sashal@kernel.org>
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Brown <broonie@kernel.org> Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/20240917134246.584026-1-mikisabate@gmail.com Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_perf_domain_get_sharing_cpumask currently assumes a 1-argument
phandle format, and directly returns the argument. Generalize this to
return the full of_phandle_args, so it can be used by drivers which use
other phandle styles (e.g. separate nodes). This also requires changing
the CPU sharing match to compare the full args structure.
Also, make sure to of_node_put(args.np) (the original code was leaking a
reference).
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: c0f02536fffb ("cpufreq: Avoid a bad reference count on CPU node") Signed-off-by: Sasha Levin <sashal@kernel.org>
This expands the validation introduced in commit 07bf7908950a ("xfrm:
Validate address prefix lengths in the xfrm selector.")
syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET
Because of the AF_UNSPEC selector, verify_newsa_info doesn't put
limits on prefixlen_{s,d}. But then copy_from_user_state sets
x->sel.family to usersa.family (AF_INET). Do the same conversion in
verify_newsa_info before validating prefixlen_{s,d}, since that's how
prefixlen is going to be used later on.
Clang 19 prints a warning when we pass &th->guid to efi_pa_va_lookup():
drivers/acpi/prmt.c:156:29: error: passing 1-byte aligned argument to
4-byte aligned parameter 1 of 'efi_pa_va_lookup' may result in an
unaligned pointer access [-Werror,-Walign-mismatch]
156 | (void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
| ^
The problem is that efi_pa_va_lookup() takes a efi_guid_t and &th->guid
is a regular guid_t. The difference between the two types is the
alignment. efi_guid_t is a typedef.
It's possible that this a bug in Clang 19. Even though the alignment of
&th->guid is not explicitly specified, it will still end up being aligned
at 4 or 8 bytes.
Anyway, as Ard points out, it's cleaner to change guid to efi_guid_t type
and that also makes the warning go away.
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://patch.msgid.link/3777d71b-9e19-45f4-be4e-17bf4fa7a834@stanley.mountain
[ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could
possibly return NULL pointer. NULL Pointer Dereference may be
triggerred without addtional check.
Add a NULL check for the returned pointer.
Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers") Cc: stable@vger.kernel.org Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Link: https://patch.msgid.link/20241006205737.8829-1-zichenxie0106@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change fixes a rare issue where the PHY fails to detect a link
due to incorrect reset behavior.
The SW_RESET definition was incorrectly assigned to bit 14, which is the
Digital Restart bit according to the datasheet. This commit corrects
SW_RESET to bit 15 and assigns DIG_RESTART to bit 14 as per the
datasheet specifications.
The SW_RESET define is only used in the phy_reset function, which fully
re-initializes the PHY after the reset is performed. The change in the
bit definitions should not have any negative impact on the functionality
of the PHY.
v2:
- added Fixes tag
- improved commit message
Cc: stable@vger.kernel.org Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <AS1P250MB0608A798661549BF83C4B43EA9462@AS1P250MB0608.EURP250.PROD.OUTLOOK.COM> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so
the commit assumes, uport can be NULL in there. But right after that
protection, there is an unprotected "uart_port_dtr_rts(uport, false);"
call. That is invoked only if HUPCL is set, so I assume that is the
reason why we do not see lots of these reports.
Or it cannot be NULL at this point at all for some reason :P.
Until the above is investigated, stay on the safe side and move this
dereference to the if too.
I got this inconsistency from Coverity under CID 1585130. Thanks.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Adapted over commit 5701cb8bf50e ("tty: Call ->dtr_rts() parameter
active consistently") not in the tree] Signed-off-by: Tomas Krcka <krckatom@amazon.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move our existing input sanity checking to the top of sel_write_load()
and add a check to ensure the buffer size is non-zero.
Move a local variable initialization from the declaration to before it
is used.
Minor style adjustments.
Reported-by: Sam Sun <samsun1006219@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
[cascardo: keep fsi initialization at its declaration point as it is used earlier] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video
is leading to black screens for around 1 second and kernel WARNING [1] traces
when calling dmub_psr_enable() with Parade 08-01 TCON.
These symptoms all go away with PSR-SU disabled for this TCON, so disable
it for now while DMUB traces [2] from the failure can be analyzed and the failure
state properly root caused.
The existing code moves VF to the same namespace as the synthetic NIC
during netvsc_register_vf(). But, if the synthetic device is moved to a
new namespace after the VF registration, the VF won't be moved together.
To make the behavior more consistent, add a namespace check for synthetic
NIC's NETDEV_REGISTER event (generated during its move), and move the VF
if it is not in the same namespace.
Cc: stable@vger.kernel.org Fixes: c0a41b887ce6 ("hv_netvsc: move VF to same namespace as netvsc device") Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1729275922-17595-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uninit was created at:
__kmalloc+0x571/0xd30
attach_auth+0x106/0x3e0
xfrm_add_sa+0x2aa0/0x4230
xfrm_user_rcv_msg+0x832/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Bytes 328-379 of 732 are uninitialized
Memory access of size 732 starts at ffff88800e18e000
Data copied to user address 00007ff30f48aff0
CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Fixes copying of xfrm algorithms where some random
data of the structure fields can end up in userspace.
Padding in structures may be filled with random (possibly sensitve)
data and should never be given directly to user-space.
A similar issue was resolved in the commit 8222d5910dae ("xfrm: Zero padding when dumping algos and encap")
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: c7a5899eb26e ("xfrm: redact SA secret with lockdown confidentiality") Cc: stable@vger.kernel.org Co-developed-by: Boris Tonofa <b.tonofa@ideco.ru> Signed-off-by: Boris Tonofa <b.tonofa@ideco.ru> Signed-off-by: Petr Vaganov <p.vaganov@ideco.ru> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In loongson_sysconf, The "core" of cores_per_node and cores_per_package
stands for a logical core, which means in a SMT system it stands for a
thread indeed. This information is gotten from SMBIOS Type4 Structure,
so in order to get a correct cores_per_package for both SMT and non-SMT
systems in parse_cpu_table() we should use SMBIOS_THREAD_PACKAGE_OFFSET
instead of SMBIOS_CORE_PACKAGE_OFFSET.
Cc: stable@vger.kernel.org Reported-by: Chao Li <lichao@loongson.cn> Tested-by: Chao Li <lichao@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Acer Predator G9-593 has a 2+1 speaker system which isn't probed
correctly.
This patch adds a quirk with the proper pin connections.
Note that I do not own this laptop, so I cannot guarantee that this
fixes the issue.
Testing was done by other users here:
https://discussion.fedoraproject.org/t/-/118482
This model appears to have two different dev IDs...
- 0x1177 (as seen on the forum link above)
- 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f)
I don't think the audio system was changed between model revisions, so
the patch applies for both IDs.
As there is very little ordering in the KVM API, userspace can
instanciate a half-baked GIC (missing its memory map, for example)
at almost any time.
This means that, with the right timing, a thread running vcpu-0
can enter the kernel without a GIC configured and get a GIC created
behind its back by another thread. Amusingly, it will pick up
that GIC and start messing with the data structures without the
GIC having been fully initialised.
Similarly, a thread running vcpu-1 can enter the kernel, and try
to init the GIC that was previously created. Since this GIC isn't
properly configured (no memory map), it fails to correctly initialise.
And that's the point where we decide to teardown the GIC, freeing all
its resources. Behind vcpu-0's back. Things stop pretty abruptly,
with a variety of symptoms. Clearly, this isn't good, we should be
a bit more careful about this.
It is obvious that this guest is not viable, as it is missing some
important part of its configuration. So instead of trying to tear
bits of it down, let's just mark it as *dead*. It means that any
further interaction from userspace will result in -EIO. The memory
will be released on the "normal" path, when userspace gives up.
Cc: stable@vger.kernel.org Reported-by: Alexander Potapenko <glider@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20241009183603.3221824-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken.
Fixes: e4e517b4be01 ("KVM: MMU: Do not unconditionally read PDPTE from guest memory") Reported-by: Kirk Swidowski <swidowski@google.com> Cc: Andy Nguyen <theflow@google.com> Cc: 3pvd <3pvd@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009140838.1036226-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While we do currently return -EFAULT in this case, it seems prudent to
follow the behaviour of other syscalls like clone3. It seems quite
unlikely that anyone depends on this error code being EFAULT, but we can
always revert this if it turns out to be an issue.
Syzbot reported that after nilfs2 reads a corrupted file system image
and degrades to read-only, the BUG_ON check for the buffer delay flag
in submit_bh_wbc() may fail, causing a kernel bug.
This is because the buffer delay flag is not cleared when clearing the
buffer state flags to discard a page/folio or a buffer head. So, fix
this.
This became necessary when the use of nilfs2's own page clear routine
was expanded. This state inconsistency does not occur if the buffer
is written normally by log writing.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Link: https://lore.kernel.org/r/20241015213300.7114-1-konishi.ryusuke@gmail.com Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption") Reported-by: syzbot+985ada84bf055a575c07@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=985ada84bf055a575c07 Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state
detection issue.
The _LID device incorrectly returns the lid status as "closed" during
boot, causing the system to enter a suspend loop right after booting.
The quirk ensures that the correct lid state is reported initially,
preventing the system from immediately suspending after startup. It
only addresses the initial lid state detection and ensures proper
system behavior upon boot.
Signed-off-by: Shubham Panwar <shubiisp8@gmail.com> Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com
[ rjw: Changelog edits ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PRMT needs to find the correct type of block to translate the PA-VA
mapping for EFI runtime services.
The issue arises because the PRMT is finding a block of type
EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services
as described in Section 2.2.2 (Runtime Services) of the UEFI
Specification [1]. Since the PRM handler is a type of runtime service,
this causes an exception when the PRM handler is called.
[Firmware Bug]: Unable to handle paging request in EFI runtime service
WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341
__efi_queue_work+0x11c/0x170
Call trace:
Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM
context.
If no suitable block is found, a warning message will be printed, but
the procedure continues to manage the next PRM handler.
However, if the PRM handler is actually called without proper allocation,
it would result in a failure during error handling.
By using the correct memory types for runtime services, ensure that the
PRM handler and the context are properly mapped in the virtual address
space during runtime, preventing the paging request error.
The issue is really that only memory that has been remapped for runtime
by the firmware can be used by the PRM handler, and so the region needs
to have the EFI_MEMORY_RUNTIME attribute.
Link: https://uefi.org/sites/default/files/resources/UEFI_Spec_2_10_Aug29.pdf Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Koba Ko <kobak@nvidia.com> Reviewed-by: Matthew R. Ochs <mochs@nvidia.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://patch.msgid.link/20241012205010.4165798-1-kobak@nvidia.com
[ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix
this.
Reported-by: Dirk Holten <dirk.holten@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219382 Cc: All applicable <stable@vger.kernel.org> Suggested-by: Dirk Holten <dirk.holten@gmx.de> Signed-off-by: Christian Heusel <christian@heusel.eu> Link: https://patch.msgid.link/20241017-lg-gram-pro-keyboard-v2-1-7c8fbf6ff718@heusel.eu Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When btrfs reserves an extent and does not use it (e.g, by an error), it
calls btrfs_free_reserved_extent() to free the reserved extent. In the
process, it calls btrfs_add_free_space() and then it accounts the region
bytes as block_group->zone_unusable.
However, it leaves the space_info->bytes_zone_unusable side not updated. As
a result, ENOSPC can happen while a space_info reservation succeeded. The
reservation is fine because the freed region is not added in
space_info->bytes_zone_unusable, leaving that space as "free". OTOH,
corresponding block group counts it as zone_unusable and its allocation
pointer is not rewound, we cannot allocate an extent from that block group.
That will also negate space_info's async/sync reclaim process, and cause an
ENOSPC error from the extent allocation process.
Fix that by returning the space to space_info->bytes_zone_unusable.
Ideally, since a bio is not submitted for this reserved region, we should
return the space to free space and rewind the allocation pointer. But, it
needs rework on extent allocation handling, so let it work in this way for
now.
Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fccbb ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the nominal_freq recorded by the kernel is equal to the lowest_freq,
and the frequency adjustment operation is triggered externally, there is
a logic error in cppc_perf_to_khz()/cppc_khz_to_perf(), resulting in perf
and khz conversion errors.
Fix this by adding a branch processing logic when nominal_freq is equal
to lowest_freq.
Move and rename cppc_cpufreq_perf_to_khz() and cppc_cpufreq_khz_to_perf() to
use them outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
Modify the interface to use struct cppc_perf_caps *caps instead of
struct cppc_cpudata *cpu_data as we only use the fields of cppc_perf_caps.
cppc_cpufreq was converting the lowest and nominal freq from MHz to kHz
before using them. We move this conversion inside cppc_perf_to_khz and
cppc_khz_to_perf to make them generic and usable outside cppc_cpufreq.
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20231211104855.558096-6-vincent.guittot@linaro.org
Stable-dep-of: d93df29bdab1 ("cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception") Signed-off-by: Sasha Levin <sashal@kernel.org>
The caller of the function dev_pm_qos_add_request() checks again a non
zero value but dev_pm_qos_add_request() can return '1' if the request
already exists. Therefore, the setup function fails while the QoS
request actually did not failed.
Fix that by changing the check against a negative value like all the
other callers of the function.
Fixes: e44655617317 ("powercap/drivers/dtpm: Add dtpm devfreq with energy model support") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20241018021205.46460-1-yuancan@huawei.com
[ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The step variable is initialized to zero. It is changed in the loop,
but if it's not changed it will remain zero. Add a variable check
before the division.
The observed behavior was introduced by commit 826b5de90c0b
("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"),
and it is difficult to show that any of the interval parameters will
satisfy the snd_interval_test() condition with data from the
amdtp_rate_table[] table.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are
supposedly valid (see link below), which is not the case today as "rx"
alone is not accepted by the current binding.
Let's rework the two interrupt properties to expose all correct
possibilities.
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
conn->sk maybe have been unlinked/freed while waiting for iso_conn_lock
so this checks if the conn->sk is still valid by checking if it part of
iso_sk_list.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn->sk is still valid by checking if it part of
sco_sk_list.
Reported-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com Tested-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465 Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If get_clock_desc() succeeds, it calls fget() for the clockid's fd,
and get the clk->rwsem read lock, so the error path should release
the lock to make the lock balance and fput the clockid's fd to make
the refcount balance and release the fd related resource.
However the below commit left the error path locked behind resulting in
unbalanced locking. Check timespec64_valid_strict() before
get_clock_desc() to fix it, because the "ts" is not changed
after that.
It was reported that after resume from suspend a PCI error is logged
and connectivity is broken. Error message is:
PCI error (cmd = 0x0407, status_errs = 0x0000)
The message seems to be a red herring as none of the error bits is set,
and the PCI command register value also is normal. Exception handling
for a PCI error includes a chip reset what apparently brakes connectivity
here. The interrupt status bit triggering the PCI error handling isn't
actually used on PCIe chip versions, so it's not clear why this bit is
set by the chip. Fix this by ignoring this bit on PCIe chip versions.
Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388 Tested-by: Atlas Yu <atlas.yu@canonical.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'taprio_change()', 'admin' pointer may become dangling due to sched
switch / removal caused by 'advance_sched()', and critical section
protected by 'q->current_entry_lock' is too small to prevent from such
a scenario (which causes use-after-free detected by KASAN). Fix this
by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update
'admin' immediately before an attempt to schedule freeing.
Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reported-by: syzbot+b65e0af58423fc8a73aa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20241018051339.418890-1-dmantipov@yandex.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
tcf_action_init() has logic for checking mismatches between action and
filter offload flags (skip_sw/skip_hw). AFAIU, this is intended to run
on the transition between the new tc_act_bind(flags) returning true (aka
now gets bound to classifier) and tc_act_bind(act->tcfa_flags) returning
false (aka action was not bound to classifier before). Otherwise, the
check is skipped.
For the case where an action is not standalone, but rather it was
created by a classifier and is bound to it, tcf_action_init() skips the
check entirely, and this means it allows mismatched flags to occur.
Taking the matchall classifier code path as an example (with mirred as
an action), the reason is the following:
When invoked from tcf_exts_validate_ex() like matchall does (but other
classifiers validate their extensions as well), tcf_action_init() runs
in a call path where "flags" always contains TCA_ACT_FLAGS_BIND (set by
line 4). So line 12 is always true, and line 13 is always true as well.
No transition ever takes place, and the check is skipped.
The code was added in this form in commit c86e0209dc77 ("flow_offload:
validate flags of filter and actions"), but I'm attributing the blame
even earlier in that series, to when TCA_ACT_FLAGS_SKIP_HW and
TCA_ACT_FLAGS_SKIP_SW were added to the UAPI.
Following the development process of this change, the check did not
always exist in this form. A change took place between v3 [1] and v4 [2],
AFAIU due to review feedback that it doesn't make sense for action flags
to be different than classifier flags. I think I agree with that
feedback, but it was translated into code that omits enforcing this for
"classic" actions created at the same time with the filters themselves.
There are 3 more important cases to discuss. First there is this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1
which should be allowed, because prior to the concept of dedicated
action flags, it used to work and it used to mean the action inherited
the skip_sw/skip_hw flags from the classifier. It's not a mismatch.
Then we have this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_hw
where there is a mismatch and it should be rejected.
Finally, we have:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_sw
where the offload flags coincide, and this should be treated the same as
the first command based on inheritance, and accepted.
[1]: https://lore.kernel.org/netdev/20211028110646.13791-9-simon.horman@corigine.com/
[2]: https://lore.kernel.org/netdev/20211118130805.23897-10-simon.horman@corigine.com/ Fixes: 7adc57651211 ("flow_offload: add skip_hw and skip_sw to control if offload the action") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241017161049.3570037-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fix for MAC addresses broke detection of the naming convention
because it gave network devices no random MAC before bind()
was called. This means that the check for the local assignment bit
was always negative as the address was zeroed from allocation,
instead of from overwriting the MAC with a unique hardware address.
The correct check for whether bind() has altered the MAC is
done with is_zero_ether_addr
Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Greg Thelen <gthelen@google.com> Diagnosed-by: John Sperbeck <jsperbeck@google.com> Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC") Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some workloads hit the infamous dev_watchdog() message:
"NETDEV WATCHDOG: eth0 (xxxx): transmit queue XX timed out"
It seems possible to hit this even for perfectly normal
BQL enabled drivers:
1) Assume a TX queue was idle for more than dev->watchdog_timeo
(5 seconds unless changed by the driver)
2) Assume a big packet is sent, exceeding current BQL limit.
3) Driver ndo_start_xmit() puts the packet in TX ring,
and netdev_tx_sent_queue() is called.
4) QUEUE_STATE_STACK_XOFF could be set from netdev_tx_sent_queue()
before txq->trans_start has been written.
5) txq->trans_start is written later, from netdev_start_xmit()
if (rc == NETDEV_TX_OK)
txq_trans_update(txq)
dev_watchdog() running on another cpu could read the old
txq->trans_start, and then see QUEUE_STATE_STACK_XOFF, because 5)
did not happen yet.
To solve the issue, write txq->trans_start right before one XOFF bit
is set :
- _QUEUE_STATE_DRV_XOFF from netif_tx_stop_queue()
- __QUEUE_STATE_STACK_XOFF from netdev_tx_sent_queue()
From dev_watchdog(), we have to read txq->state before txq->trans_start.
Add memory barriers to enforce correct ordering.
In the future, we could avoid writing over txq->trans_start for normal
operations, and rename this field to txq->xoff_start_time.
Fixes: bec251bc8b6a ("net: no longer stop all TX queues in dev_watchdog()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20241015194118.3951657-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Applications are sensitive to long network latency, particularly
heartbeat monitoring ones. Longer the tx timeout recovery higher the
risk with such applications on a production machines. This patch
remedies, yet honoring device set tx timeout.
Modify watchdog next timeout to be shorter than the device specified.
Compute the next timeout be equal to device watchdog timeout less the
how long ago queue stop had been done. At next watchdog timeout tx
timeout handler is called into if still in stopped state. Either called
or not called, restore the watchdog timeout back to device specified.
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
Smaller drivers shy away from the scheme and introduce a lock
which may cause deadlocks in netpoll.
Provide macros which encapsulate the necessary logic.
The macros do not prevent false wake ups, the extra barrier
required to close that race is not worth it. See discussion in:
https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()") Signed-off-by: Sasha Levin <sashal@kernel.org>
driver.rst had a historical form of list of common problems.
In the age os Sphinx and rendered documentation it's better
to use the more usual title + text format.
This will allow us to render kdoc into the output more naturally.
No changes to the actual text.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
mv88e6393x_port_set_policy doesn't correctly shift the ptr value when
converting the policy format between the old and new styles, so the
target register ends up with the ptr being written over the data bits.
Shift the pointer to align with the format expected by
mv88e6393x_port_policy_write().
Fixes: 6584b26020fc ("net: dsa: mv88e6xxx: implement .port_set_policy for Amethyst") Signed-off-by: Peter Rashleigh <peter@rashleigh.ca> Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241016040822.3917-1-peter@rashleigh.ca> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sasha Levin <sashal@kernel.org>
build_skb() returns NULL in case of a memory allocation failure so handle
it inside __octep_oq_process_rx() to avoid NULL pointer dereference.
__octep_oq_process_rx() is called during NAPI polling by the driver. If
skb allocation fails, keep on pulling packets out of the Rx DMA queue: we
shouldn't break the polling immediately and thus falsely indicate to the
octep_napi_poll() that the Rx pressure is going down. As there is no
associated skb in this case, don't process the packets and don't push them
up the network stack - they are skipped.
Helper function is implemented to unmmap/flush all the fragment buffers
used by the dropped packet. 'alloc_failures' counter is incremented to
mark the skb allocation error in driver statistics.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sasha Levin <sashal@kernel.org>
The common code with some packet and index manipulations is extracted and
moved to newly implemented helper to make the code more readable and avoid
duplication. This is a preparation for skb allocation failure handling.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Suggested-by: Simon Horman <horms@kernel.org> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Stable-dep-of: eb592008f79b ("octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 71ae2cb30531 ("net: plip: Fix fall-through warnings for Clang")
plip was not able to send any packets, this patch replaces one
unintended break; with fallthrough; which was originally missed by
commit 9525d69a3667 ("net: plip: mark expected switch fall-throughs").
I have verified with a real hardware PLIP connection that everything
works once again after applying this patch.
Fixes: 71ae2cb30531 ("net: plip: Fix fall-through warnings for Clang") Signed-off-by: Jakub Boehm <boehm.jakub@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015-net-plip-tx-fix-v1-1-32d8be1c7e0b@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sasha Levin <sashal@kernel.org>
The be_xmit() returns NETDEV_TX_OK without freeing skb
in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it.
Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Message-ID: <20241015144802.12150-1-wanghai38@huawei.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sasha Levin <sashal@kernel.org>
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it.
Link: https://lore.kernel.org/all/20241007144724.920954-1-leo.yan@arm.com/ Fixes: dec65d79fd26 ("tracing/probe: Check event name length correctly") Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Not all tasks have a vDSO mapped, for example kthreads never do. If such
a task ever ends up calling stack_top(), it will derefence the NULL vdso
pointer and crash.
We can see that "Time namespaces are not supported" on LoongArch:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
# Time namespaces are not supported
ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
# Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
1..0 # SKIP Time namespaces are not supported
On LoongArch the current kernel does not support CONFIG_TIME_NS which
depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable
CONFIG_TIME_NS to build kernel/time/namespace.c.
Additionally, it needs to define some arch-dependent functions for the
timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and
vdso_join_timens().
At the same time, modify the layout of vvar to use one page size for
generic vdso data, expand another page size for timens vdso data and
assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in
the future) for loongarch vdso data, at last add the callback function
vvar_fault() and modify stack_top().
With this patch under CONFIG_TIME_NS:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
ok 18 [739] Result (0) matches expectation (0)
# Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Stable-dep-of: 134475a9ab84 ("LoongArch: Don't crash in stack_top() for tasks without vDSO") Signed-off-by: Sasha Levin <sashal@kernel.org>
Check for overflow when computing alen in udf_current_aext to mitigate
later uninit-value use in udf_get_fileshortad KMSAN bug[1].
After applying the patch reproducer did not trigger any issue[2].
projects / linux / log