Merge tag 'thermal-v7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.2 from Daniel Lezcano:
- Add the QCom Nord temperature sensor DT bindings (Deepti Jaggi)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch to devm cooling device registration version
(Daniel Lezcano)
- Replace the devm version implementation by the helper doing the same
thing (Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix typo in comment, "uppper" with "upper" in the TSens QCom driver
(Jinseok Kim)
- Add the QCom Shikra temperature sensor DT bindings (Gaurav Kohli)
- Add the QCom Hawi temperature sensor DT bindings (Dipa Ramesh Mantre)
- Fix atomic temperature read in the QCom tsens to comply with
hardware documentation (Priyansh Jain)
- Fix trailing whitespace and repeated word in the OF code. Do not
split quoted string across lines in the iMX7 driver (Mayur Kumar)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add the i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Split the core code and the OF which are interleaved. Add the
cooling device per index registration in order to support dedicated
cooling devices controller (Daniel Lezcano)
- Add DT binding to specify an index in the cooling device map (Gaurav
Kohli)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)"
* tag 'thermal-v7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (34 commits)
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
dt-bindings: thermal: qoriq: Add compatible string for imx93
thermal/drivers/spacemit/k1: Add thermal sensor support
dt-bindings: thermal: Add SpacemiT K1 thermal sensor
thermal/drivers/imx: Do not split quoted string across lines
...
Priyansh Jain [Mon, 1 Jun 2026 06:37:57 +0000 (12:07 +0530)]
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
Add a no_irq_wake flag to struct tsens_plat_data to allow platforms
to control whether TSENS interrupts should be configured as wakeup
sources.
Create a new data_automotive structure and add compatible strings for
automotive TSENS variants (SA8775P, SA8255P) with wakeup interrupts
disabled.
Automotive platforms can enter a low-power parking suspend state where the
application processors and thermal mitigation paths are not active. In this
state, waking the system due to TSENS threshold interrupts does not enable
useful thermal action, but it does repeatedly break suspend residency and
increase battery drain.
Allow these automotive variants to keep TSENS monitoring enabled during
normal runtime while opting out of TSENS wakeup interrupts during suspend,
so the system can remain in low power until ignition/resume.
Priyansh Jain [Mon, 1 Jun 2026 06:37:56 +0000 (12:07 +0530)]
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
This change improves power management by using the standardized PM
framework for wake IRQ handling.
Move wake IRQ control to the PM suspend/resume path:
- store uplow/critical IRQ numbers in struct tsens_priv
- enable wake IRQs in tsens_suspend_common() when wakeup is allowed
- disable wake IRQs in tsens_resume_common()
- mark the device wakeup-capable during probe
This aligns TSENS wake behavior with suspend flow and avoids keeping
wake IRQs permanently enabled during runtime.
Daniel Lezcano [Mon, 1 Jun 2026 09:01:53 +0000 (11:01 +0200)]
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
Even it is very unlikely the thermal framework is disabled, the newly
added devm_thermal_cooling_device_register() function has not the stub
when the thermal framework is optout in the kernel.
Add it.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202605301554.S9n45bfQ-lkp@intel.com/ Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Link: https://patch.msgid.link/20260601090152.1243983-2-daniel.lezcano@kernel.org
Gaurav Kohli [Tue, 26 May 2026 14:08:11 +0000 (16:08 +0200)]
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
Extend the thermal cooling device binding to support a 3 cells specifier
along with the 2 cells format.
Update #cooling-cells property to enum to support both 2 and 3 arguments.
Fix pwm-fan.yaml to restrict the number of cells to 'const: 2'
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Link: https://patch.msgid.link/20260526140802.1059293-22-daniel.lezcano@oss.qualcomm.com
Daniel Lezcano [Tue, 26 May 2026 14:08:10 +0000 (16:08 +0200)]
thermal/of: Support cooling device ID in cooling-spec
Extend the cooling device specifier parsing to support an optional
cooling device identifier (cdev_id).
Two formats are now supported:
- Legacy format:
<&cdev lower upper>
- Indexed format:
<&cdev cdev_id lower upper>
When the indexed format is used, both the device node and the
cdev_id must match in order to bind a cooling device to a thermal
zone. The legacy format continues to match on the device node only,
preserving backward compatibility.
Update the parsing logic accordingly to handle both formats and
extract the mitigation limits from the appropriate arguments.
This is a preparatory step for upcoming DT bindings describing
cooling devices using (device node, id) tuples instead of child
nodes.
Daniel Lezcano [Tue, 26 May 2026 14:08:09 +0000 (16:08 +0200)]
thermal/of: Pass cdev_id and introduce devm registration helper
Extend the OF cooling device registration to support an explicit
cooling device identifier (cdev_id), preparing for upcoming DT
bindings where cooling devices are identified by a tuple (device node,
id) instead of relying on child nodes.
Introduce a new helper:
devm_thermal_of_cooling_device_register()
which registers a cooling device using the device's of_node and an
explicit cdev_id. This complements the existing
devm_thermal_of_child_cooling_device_register() helper, which
remains dedicated to the legacy child-node based bindings.
Internally, factorize the devm registration logic into a common
helper to avoid code duplication.
Existing users are unaffected, as the child-based helper continues
to pass a default cdev_id of 0, preserving current behavior.
This change is a preparatory step for supporting indexed cooling
devices in thermal OF bindings.
Daniel Lezcano [Tue, 26 May 2026 14:08:05 +0000 (16:08 +0200)]
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
The device node pointer stored in struct thermal_cooling_device is
only used by the OF-specific thermal code to associate cooling devices
with thermal zones defined in device tree.
Now that OF and non-OF registration paths are separated and non-OF
users no longer rely on devm_thermal_of_cooling_device_register() with
a NULL device node, the np field is no longer required for non-OF
configurations.
Make this field conditional on CONFIG_THERMAL_OF to reduce memory
footprint and better reflect its usage.
Daniel Lezcano [Tue, 26 May 2026 14:08:06 +0000 (16:08 +0200)]
thermal/of: Move cooling device OF helpers out of thermal core
The functions:
- thermal_of_cooling_device_register()
- devm_thermal_of_cooling_device_register()
are specific to device tree usage but are currently implemented in
thermal_core.c.
Move them to thermal_of.c to better reflect the separation between
generic thermal core code and OF-specific logic.
This change is enabled by the recent split of the cooling device
registration into allocation and addition phases, allowing OF-specific
handling (such as device node assignment) to be isolated from the core.
Daniel Lezcano [Tue, 26 May 2026 14:08:04 +0000 (16:08 +0200)]
hwmon: Use non-OF thermal cooling device registration API
Some HWMON drivers register cooling devices using the OF helper
devm_thermal_of_cooling_device_register() with a NULL device node.
With the introduction of a dedicated non-OF registration API,
switch these users to devm_thermal_cooling_device_register()
to make the intent explicit and avoid relying on OF-specific helpers.
This is a pure refactoring with no functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Link: https://patch.msgid.link/20260526140802.1059293-15-daniel.lezcano@oss.qualcomm.com
Introduce a device-managed variant of the non-OF cooling device
registration API.
This complements devm_thermal_of_cooling_device_register() and allows
non-device-tree users to register cooling devices with automatic
cleanup tied to the device lifecycle.
The helper relies on devm_add_action_or_reset() to release the cooling
device via thermal_cooling_device_release() on driver detach or probe
failure.
This keeps the API consistent across OF and non-OF users and avoids
manual cleanup in error paths.
The SoC Thermal Management Unit (TMU) is essential for proper operation
of the SoCs. Kernel should not ask users choice of drivers when that
choice is obvious and known to the developers that answer should be
'yes' or 'module'.
Impact of making it default:
1. arm64 defconfig: No changes, already present in defconfig.
2. arm32: No changes, the driver is already selected by MACH_EXYNOS.
3. COMPILE_TEST builds: enable by default for arm32 or arm64 builds,
whenever ARCH_EXYNOS is selected. This has impact on build time and
feels logical, because if one selects ARCH_EXYNOS then probably by
default wants to build test it entirely. Kernels with COMPILE_TEST
are not supposed to be used for booting.
Jacky Bai [Thu, 30 Apr 2026 02:53:32 +0000 (10:53 +0800)]
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
Invalid temperature measurements may be observed across the temperature
range specified in the device data sheet. The invalid temperature can
be read from any remote site and from any capture or report registers.
The invalid change in temperature can be positive or negative and the
resulting temperature can be outside the calibrated range, in which
case the TSR[ORL] or TSR[ORH] bit will be set.
Workaround:
Use the raising/falling edge threshold to filter out the invalid temp.
Check the TIDR register to make sure no jump happens When reading the temp.
Jacky Bai [Thu, 30 Apr 2026 02:53:31 +0000 (10:53 +0800)]
thermal/drivers/qoriq: Add i.MX93 tmu support
For Thermal monitor unit(TMU) used on i.MX93, the HW revision info read
from the ID register is the same the one used on some of the QorIQ
platform, but the config has some slight differance. Add i.MX93 compatible
string and corresponding code for it.
Jacky Bai [Thu, 30 Apr 2026 02:53:30 +0000 (10:53 +0800)]
dt-bindings: thermal: qoriq: Add compatible string for imx93
Add i.MX93 compatible string 'fsl,imx93-tmu' because Thermal monitor
unit(TMU) on i.MX93 has differences with QorIQ platform and not fully
compatible with existing Platform, such as fsl,qoriq-tmu.
Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20260430-imx93_tmu-v6-1-485459d7b54f@nxp.com
thermal/drivers/spacemit/k1: Add thermal sensor support
The thermal sensor on K1 supports monitoring five temperature zones.
The driver registers these sensors with the thermal framework
and supports standard operations:
- Reading temperature (millidegree Celsius)
- Setting high/low thresholds for interrupts
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> Reviewed-by: Yao Zi <me@ziyao.cc> Tested-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Vincent Legoll <legoll@online.fr> # OrangePi-RV2 Tested-by: Gong Shuai <gsh517025@gmail.com> Link: https://patch.msgid.link/20260427-k1-thermal-v5-2-df39187480ed@mailbox.org
Mayur Kumar [Mon, 11 May 2026 17:42:55 +0000 (23:12 +0530)]
thermal/drivers/imx: Do not split quoted string across lines
The checkpatch tool warns against splitting quoted strings across
multiple lines. Join the dev_info message into a single line to
improve the ability to grep for the message in the source.
Priyansh Jain [Thu, 14 May 2026 11:36:43 +0000 (17:06 +0530)]
thermal/drivers/qcom/tsens: Atomic temperature read with hardware-guided retries
The existing TSENS temperature read logic polls the valid bit and then
reads the temperature register. When temperature reads are triggered
at very short intervals, this can race with hardware updates and allow
the temperature field to be read while it is still being updated.
In this case, the valid bit may already be asserted even though the
temperature value is transitioning, resulting in an incorrect reading.
Hardware programming guidelines require the temperature value and the
valid bit to be sampled atomically in the same read transaction. A
reading is considered valid only if the valid bit is observed set in
that same sample.
The guidelines further specify that software should attempt the
temperature read up to three times to account for transient update
windows. If none of the attempts yields a valid sample, a stable fallback
value must be returned: if the first and second samples match, the second
value is returned;otherwise, if the second and third samples match, the
third value is returned;if neither pair matches, -EAGAIN is returned.
Update the TSENS sensor read logic to implement atomic sampling along
with the recommended retry-and-compare fallback behavior. This removes
the race window and ensures deterministic temperature values in
accordance with hardware requirements.
Ronald Claveau [Fri, 24 Apr 2026 15:45:12 +0000 (17:45 +0200)]
thermal/drivers/amlogic: Add support for secure monitor calibration readout
Some SoCs (e.g. T7) expose thermal calibration data through the secure
monitor rather than a directly accessible eFuse register. Add a use_sm
flag to amlogic_thermal_data to select this path, and retrieve the
firmware handle and tsensor_id from the "amlogic,secure-monitor" DT
phandle with one fixed argument.
Also introduce the amlogic,t7-thermal compatible using this new path.
While refactoring, fix a pre-existing bug where
amlogic_thermal_initialize() was called after
devm_thermal_of_zone_register(), causing the thermal framework to
read an uninitialized trim_info on zone registration.
Ronald Claveau [Tue, 2 Jun 2026 14:19:20 +0000 (16:19 +0200)]
thermal/drivers/amlogic: Add missing dependency on MESON_SM
The amlogic thermal driver calls meson_sm_get() and
meson_sm_get_thermal_calib() which are exported by the meson_sm
driver. Without CONFIG_MESON_SM enabled, the build fails with
undefined references to these symbols.
Add a proper Kconfig dependency on MESON_SM instead of relying on
stub functions, which makes the dependency explicit and prevents
invalid configurations.
Add SM_THERMAL_CALIB_READ at SMC ID 0x82000047 in the command
table and implement meson_sm_get_thermal_calib(), which forwards the
tsensor_id argument to the secure monitor and returns the calibration data.
Also realign the CMD() column to improve readability.
Ronald Claveau [Fri, 24 Apr 2026 15:45:10 +0000 (17:45 +0200)]
firmware: meson: sm: Thermal calibration read via secure monitor
Add SM_THERMAL_CALIB_READ to the secure monitor command enum and
introduce meson_sm_get_thermal_calib() to allow drivers to retrieve
thermal sensor calibration data through the firmware interface.
Ronald Claveau [Fri, 24 Apr 2026 15:45:09 +0000 (17:45 +0200)]
dt-bindings: thermal: amlogic: Add support for T7
Add the amlogic,t7-thermal compatible for the Amlogic T7 thermal sensor.
Unlike existing variants which use a phandle to the ao-secure syscon,
the T7 relies on a secure monitor interface described by a phandle and
a sensor index argument.
The T7 integrates multiple thermal sensors, all accessed through the
same SMC call. The sensor index argument is required to identify which
sensor's calibration data the secure monitor should return, as a single
SM_THERMAL_CALIB_READ command serves all of them.
Introduce the amlogic,secure-monitor property as a phandle-array and
make amlogic,ao-secure or amlogic,secure-monitor conditionally required
depending on the compatible.
Daniel Lezcano [Fri, 24 Apr 2026 16:00:19 +0000 (18:00 +0200)]
thermal/drivers/tegra/soctherma: Switch to devm cooling device registration
Use devm_thermal_of_cooling_device_register() to simplify resource
management and avoid manual cleanup in error paths.
As a side effect this change has the benefit of solving an existing
issue. Before, the function tegra_soctherm_remove() only called
debugfs_remove_recursive() and never called thermal_cooling_device_unregister()
for any of the cooling devices registered here.
After the driver removal, the thermal framework's cdev list would
still hold references to thermal_cooling_device objects whose devdata
pointer (ts) pointed to memory already freed by the platform device's
devm cleanup.
With this change, the cooling device is unregistered when the driver
is removed, thus fixing the issue above.
Daniel Lezcano [Fri, 24 Apr 2026 16:00:18 +0000 (18:00 +0200)]
thermal/drivers/tegra/soctherm: Use devm_add_action_or_reset() for clock disable
Replace the manual error handling paths disabling the clocks with
devm_add_action_or_reset(). This ensures the clocks are properly
disabled on probe failure and driver removal, while simplifying the
code by removing the explicit error paths.
Marco Crivellari [Fri, 15 May 2026 08:49:20 +0000 (10:49 +0200)]
thermal: core: Add WQ_UNBOUND to alloc_workqueue() users
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
This workqueue has no benefits being per-CPU, so make it unbound adding
WQ_UNBOUND, removing also the WQ_POWER_EFFICIENT flag.
Ovidiu Panait [Wed, 20 May 2026 16:58:34 +0000 (16:58 +0000)]
thermal/core: Populate max_state before setting up cooling dev sysfs
Since commit
13f4e660a126 ("thermal/core: Split __thermal_cooling_device_register()
into two functions")
thermal_cooling_device_setup_sysfs() is called before the
->get_max_state() callback in thermal_cooling_device_add().
However, cooling_device_stats_setup() allocates space based on
cdev->max_state, which is not initialized at that point.
With CONFIG_THERMAL_STATISTICS=y, an out of bounds access happens
inside thermal_cooling_device_stats_update(), followed by a kernel
crash:
To fix this, restore the original ordering of ->get_max_state() and
thermal_cooling_device_setup_sysfs(). Note that with this reordering,
the dev_set_name() and ->get_max_state() error paths now reach
thermal_cdev_release() without setup_sysfs() having run. This is safe
because cdev->stats is NULL in that case and destroy_sysfs() is a no-op.
Fixes: 13f4e660a126 ("thermal/core: Split __thermal_cooling_device_register() into two functions") Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Link: https://patch.msgid.link/20260520165835.90974-1-ovidiu.panait.rb@renesas.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Lezcano [Tue, 5 May 2026 14:44:47 +0000 (16:44 +0200)]
thermal/core: Split __thermal_cooling_device_register() into two functions
In preparation for the upcoming changes separating OF and non-OF code,
split __thermal_cooling_device_register() into allocation and addition
phases.
This allows moving the device node assignment out of the core
initialization path.
This change is not a trivial split. The lifetime of the cooling device
is managed by the device core through put_device(), which triggers
thermal_release() to free all associated resources.
With the introduction of thermal_cooling_device_alloc(), the allocation
path must mirror what thermal_release() undoes. In contrast,
thermal_cooling_device_add() must not perform any rollback and relies
on put_device() for cleanup on error paths. This avoids both double
free and resource leaks.
As part of this rework, add the missing device_initialize() call when
allocating the cooling device.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Replace device_register() with device_add() ]
[ rjw: Rebase on top of previously applied material ] Link: https://patch.msgid.link/20260505144447.2853933-1-daniel.lezcano@oss.qualcomm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
thermal: hwmon: Use extra_groups for adding temperature attributes
Instead of passing NULL as the last argument to __hwmon_device_register()
in hwmon_device_register_for_thermal() and then adding each temperature
sysfs attribute to the hwmon device via device_create_file(), redefine
hwmon_device_register_for_thermal() to take an extra_groups argument
that will be passed to __hwmon_device_register(), define an attribute
group with a proper .is_visible() callback for the temperature
attributes and a related attribute groups pointer, and pass the latter
to hwmon_device_register_for_thermal().
This causes the code to be way more straightforward and closer to
what the other users of the hwmon subsystem do.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, the removal code skips the
removal of hwmon0 because of the temp2_input attribute belonging to
thermal_zone1 which effectively prevents thermal_zone0 removal from
making progress.
To address this problem, rework the thermal hwmon code to register one
hwmon device for each thermal zone, but since user space utilities
produce confusing output in some cases when there are multiple hwmon
devices with the same name attribute value present under thermal zones
of the same type, append the thermal zone ID preceded by an underline
character to the name of the hwmon device registered for that thermal
zone.
thermal: hwmon: Fix critical temperature attribute removal
Since the return value of thermal_zone_crit_temp_valid() depends on
the behavior of the thermal zone .get_crit_temp() callback which
may change over time in theory, thermal_remove_hwmon_sysfs() may
attempt to remove a critical temperature attribute that has not
been created, passing a pointer to an uninitialized attribute
structure to device_remove_file().
To avoid that, set a flag in struct thermal_hwmon_temp after creating
a critical temperature attribute and use the value of that flag to
decide whether or not the attribute needs to be removed.
Fixes: e8db5d6736a7 ("thermal: hwmon: Make the check for critical temp valid consistent") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2437056.ElGaqSPkdT@rafael.j.wysocki Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Lezcano [Fri, 8 May 2026 18:05:10 +0000 (20:05 +0200)]
thermal/core: Allocate the thermal class dynamically
Use class_create() instead of a statically allocated struct class.
This allows the thermal class to be managed through a dynamically
allocated class object and avoids keeping a static class instance
around.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added __ro_after_init to thermal_class ]
[ rjw: Used temporary local var to store class_create() return value ] Link: https://patch.msgid.link/20260508180511.1306659-4-daniel.lezcano@oss.qualcomm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Lezcano [Fri, 8 May 2026 18:05:09 +0000 (20:05 +0200)]
thermal/core: Add dedicated release callback for thermal zones
The thermal class release callback currently handles thermal zone
cleanup by checking the device name prefix.
Move the thermal zone cleanup to a dedicated struct device release
callback. This avoids relying on device names to select the release
path and keeps the thermal zone lifetime handling local to the thermal
zone object.
Daniel Lezcano [Fri, 8 May 2026 18:05:08 +0000 (20:05 +0200)]
thermal/core: Add dedicated release callback for cooling devices
The thermal class release callback currently handles both thermal
zones and cooling devices by checking the device name prefix.
Move the cooling device cleanup to a dedicated struct device release
callback. This avoids relying on device names to select the release
path and keeps the cooling device lifetime handling local to the
cooling device object.
thermal: core: Simplify unregistration of governors
Thermal governors are only unregistered in the thermal_init() error
path and they actually are only deleted from thermal_governor_list.
Put the entire code needed to do that to thermal_unregister_governors()
and rearrange thermal_init() to call that function also when
thermal_register_governors() returns an error.
This allows thermal_unregister_governor() to be dropped
and thermal_register_governor() that is only called by
thermal_register_governors() can be made static __init, so the
headers of these two functions can be dropped from thermal_core.h.
thermal: core: Remove dead code from two functions
Since thermal_register_governor() is only called by
thermal_register_governors() which runs before clearing
thermal_class_unavailable, thermal_tz_list is guaranteed to be
empty when it runs, so the code walking that list in it is
effectively dead.
The same observation applies to the code walking thermal_tz_list
in thermal_unregister_governor() which is also called only if
thermal_class_unavailable hasn't been cleared.
Remove the dead code from both functions mentioned above and rearrange
thermal_register_governor() to reduce indentation level.
Hyunwoo Kim [Fri, 8 May 2026 08:53:09 +0000 (17:53 +0900)]
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 10 May 2026 15:10:47 +0000 (08:10 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
Linus Torvalds [Sun, 10 May 2026 01:42:54 +0000 (18:42 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix sk_local_storage diag dump via netlink (Amery Hung)
- Fix off-by-one in arena direct-value access (Junyoung Jang)
- Reject TCP_NODELAY in bpf-tcp congestion control (KaFai Wan)
- Fix type confusion in bpf_*_sock() (Kuniyuki Iwashima)
- Reject TX-only AF_XDP sockets (Linpu Yu)
- Don't run arg-tracking analysis twice on main subprog (Paul Chaignon)
- Fix NULL pointer dereference in bpf_sk_storage_clone and fib lookup
(Weiming Shi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix off-by-one boundary validation in arena direct-value access
xskmap: reject TX-only AF_XDP sockets
bpf: Don't run arg-tracking analysis twice on main subprog
bpf: Free reuseport cBPF prog after RCU grace period.
bpf: tcp: Fix type confusion in sol_tcp_sockopt().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp6_sock().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp_sock().
mptcp: bpf: Fix type confusion in bpf_mptcp_sock_from_subflow()
selftest: bpf: Add test for bpf_tcp_sock() and RAW socket.
bpf: tcp: Fix type confusion in bpf_tcp_sock().
tools/headers: Regenerate stddef.h to fix BPF selftests
bpf: Fix sk_local_storage diag dumping uninitialized special fields
bpf: Fix NULL pointer dereference in bpf_skb_fib_lookup()
sockmap: Fix sk_psock_drop() race vs sock_map_{unhash,close,destroy}().
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
selftests/bpf: Verify bpf-tcp-cc rejects TCP_NODELAY
selftests/bpf: Test TCP_NODELAY in TCP hdr opt callbacks
bpf: Reject TCP_NODELAY in bpf-tcp-cc
bpf: Reject TCP_NODELAY in TCP header option callbacks
Junyoung Jang [Sun, 26 Apr 2026 17:25:05 +0000 (02:25 +0900)]
bpf: Fix off-by-one boundary validation in arena direct-value access
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Linpu Yu [Fri, 8 May 2026 14:43:43 +0000 (22:43 +0800)]
xskmap: reject TX-only AF_XDP sockets
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23ceaca ("xsk: Fix possible segfault at xskmap entry insertion") Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Yifan Wu <yifanwucs@gmail.com> Signed-off-by: Linpu Yu <linpu5433@gmail.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Paul Chaignon [Thu, 7 May 2026 18:22:06 +0000 (20:22 +0200)]
bpf: Don't run arg-tracking analysis twice on main subprog
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Linus Torvalds [Sat, 9 May 2026 18:47:39 +0000 (11:47 -0700)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Linus Torvalds [Sat, 9 May 2026 15:32:50 +0000 (08:32 -0700)]
Merge tag 'hwmon-for-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ads7871: Fix endianness bug in 16-bit register reads
- lm75: Fix configuration register writes and AS6200/TMP112 setup and
alarm handling
- lm63: Fix TOCTOU problems
- corsair-psu: Close HID device on probe errors
- ltc2992: Fix overflow and threshold range
- Documentation: fix link to ideapad-laptop.c file
- Remove stale CONFIG_SENSORS_SBRMI Makefile reference
* tag 'hwmon-for-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ads7871) Fix endianness bug in 16-bit register reads
hwmon: (lm75) Fix configuration register writes.
hwmon: (lm75) Fix AS6200 and TMP112 setup and alarm handling
hwmon: (lm63) Add locking to avoid TOCTOU
hwmon: (corsair-psu) Close HID device on probe errors
hwmon: Remove stale CONFIG_SENSORS_SBRMI Makefile reference
Documentation: hwmon: fix link to ideapad-laptop.c file
hwmon: (ltc2992) Fix u32 overflow in power read path
hwmon: (ltc2992) Clamp threshold writes to hardware range
Linus Torvalds [Sat, 9 May 2026 15:10:07 +0000 (08:10 -0700)]
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
Linus Torvalds [Sat, 9 May 2026 15:03:21 +0000 (08:03 -0700)]
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
Linus Torvalds [Sat, 9 May 2026 03:28:45 +0000 (20:28 -0700)]
Merge tag 'x86-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix memory map enumeration bug in the Xen e820 parsing code (Juergen
Gross)
- Re-enable e820 BIOS fallback if e820 table is empty (David Gow)
* tag 'x86-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/e820: Re-enable BIOS fallback if e820 table is empty
x86/xen: Fix a potential problem in xen_e820_resolve_conflicts()
Linus Torvalds [Sat, 9 May 2026 02:42:10 +0000 (19:42 -0700)]
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Linus Torvalds [Sat, 9 May 2026 02:39:18 +0000 (19:39 -0700)]
Merge tag 'perf-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix deadlock in the perf_mmap() failure path (Peter Zijlstra)
- Intel ACR (Auto Counter Reload) fixes (Dapeng Mi):
- Fix validation and configuration of ACR masks
- Fix ACR rescheduling bug causing stale masks
- Disable the PMI on ACR-enabled hardware
- Enable ACR on Panther Cover uarch too
* tag 'perf-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Enable auto counter reload for DMR
perf/x86/intel: Disable PMI for self-reloaded ACR events
perf/x86/intel: Always reprogram ACR events to prevent stale masks
perf/x86/intel: Improve validation and configuration of ACR masks
perf/core: Fix deadlock in perf_mmap() failure path
Linus Torvalds [Fri, 8 May 2026 23:08:58 +0000 (16:08 -0700)]
Merge tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Don't fallback to bus reset after failed slot reset; a bus reset
isn't safe if the .reset_slot() callback is implemented (Keith Busch)
- Update saved_config_space upon resource assignment to fix passthrough
regressions when x86 pcibios_assign_resources() updates BARs (Lukas
Wunner)
- Initialize a temporary pci_dev->dev in sysfs 'new_id' attribute to
fix a lockdep regression after driver_override was moved from PCI to
device core (Samiullah Khawaja)
- Update MAINTAINERS email addresses (Marek Vasut, Hans Zhang)
- Add MAINTAINERS reviewer for PCIe Cadence IP (Aksh Garg)
* tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Aksh Garg as PCIe CADENCE reviewer
MAINTAINERS: Update Hans Zhang email for PCIe CIX Sky1
MAINTAINERS: Update Marek Vasut email for PCIe R-Car
PCI: Initialize temporary device in new_id_store()
PCI: Update saved_config_space upon resource assignment
PCI: Don't fallback to bus reset after failed slot reset
PCI: Initialize temporary device in new_id_store()
When setting new_id of a PCI device driver using sysfs a lockdep splat
occurs. This is because new_id_store() builds a temporary pci_dev for
pci_match_device(), which calls device_match_driver_override(). That
depends on the driver_override.lock added by cb3d1049f4ea ("driver core:
generalize driver_override in struct device").
The new driver_override.lock was not initialized in the temporary pci_dev,
resulting in this lockdep splat.
Initialize the temporary pci_dev to fix this.
Repro:
Build with CONFIG_LOCKDEP=y, boot with QEMU, and add a new ID:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 UID: 0 PID: 177 Comm: liveupdate-iomm Not tainted 7.0.0+ #9 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
register_lock_class+0x77e/0x790
lock_acquire+0xbf/0x2e0
pci_match_device+0x24/0x180
new_id_store+0x189/0x1d0
kernfs_fop_write_iter+0x14f/0x210
vfs_write+0x263/0x5e0
ksys_write+0x79/0xf0
do_syscall_64+0x117/0xf80
Fixes: 10a4206a2401 ("PCI: use generic driver_override infrastructure") Fixes: 8895d3bcb8ba ("PCI: Fail new_id for vendor/device values already built into driver") Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
[bhelgaas: add commit log details and repro, trim backtrace] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Link: https://patch.msgid.link/20260505234327.716630-1-skhawaja@google.com
PCI: Update saved_config_space upon resource assignment
Bernd reports passthrough failure of a Digital Devices Cine S2 V6 DVB
adapter plugged into an ASRock X570S PG Riptide board with BIOS version
P5.41 (09/07/2023):
ddbridge 0000:05:00.0: detected Digital Devices Cine S2 V6 DVB adapter
ddbridge 0000:05:00.0: cannot read registers
ddbridge 0000:05:00.0: fail
BIOS assigns an incorrect BAR to the DVB adapter which doesn't fit into the
upstream bridge window. The kernel corrects the BAR assignment:
pci 0000:07:00.0: BAR 0 [mem 0xfffffffffc500000-0xfffffffffc50ffff 64bit]: can't claim; no compatible bridge window
pci 0000:07:00.0: BAR 0 [mem 0xfc500000-0xfc50ffff 64bit]: assigned
Correction of the BAR assignment happens in an x86-specific fs_initcall,
pcibios_assign_resources(), after device enumeration in a subsys_initcall.
This order was introduced at the behest of Linus in 2004:
No other architecture performs such a late BAR correction.
Bernd bisected the issue to commit a2f1e22390ac ("PCI/ERR: Ensure error
recoverability at all times"), but it only occurs in the absence of commit 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing").
This combination exists in stable kernel v6.12.70, but not in mainline,
hence Bernd cannot reproduce the issue with mainline.
Since a2f1e22390ac, config space is saved on enumeration, prior to BAR
correction. Upon passthrough, the corrected BAR is overwritten with the
incorrect saved value by:
But only if the device's current_state is PCI_UNKNOWN, as it was prior to
commit 4d4c10f763d7. Since the commit, it is PCI_D0, which changes the
behavior of vfio_pci_set_power_state() to no longer restore the state
without saving it first.
Alexandre is reporting the same issue as Bernd, but in his case, mainline
is affected as well. The difference is that on Alexandre's system, the
host kernel binds a driver to the device which is unbound prior to
passthrough, whereas on Bernd's system no driver gets bound by the host
kernel.
Unbinding sets current_state to PCI_UNKNOWN in pci_device_remove(), so when
vfio-pci is subsequently bound to the device, pci_restore_state() is once
again called without invoking pci_save_state() first.
To robustly fix the issue, always update saved_config_space upon resource
assignment.
Reported-by: Bernd Schumacher <bernd@bschu.de> Closes: https://lore.kernel.org/r/acfZrlP0Ua_5D3U4@eldamar.lan/ Reported-by: Alexandre N. <an.tech@mailo.com> Closes: https://lore.kernel.org/r/dd3c3358-de0f-4a56-9c81-04aceaab4058@mailo.com/ Fixes: a2f1e22390ac ("PCI/ERR: Ensure error recoverability at all times") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Bernd Schumacher <bernd@bschu.de> Tested-by: Alexandre N. <an.tech@mailo.com> Cc: stable@vger.kernel.org # v6.12+ Link: https://patch.msgid.link/febc3f354e0c1f5a9f5b3ee9ffddaa44caccf651.1776268054.git.lukas@wunner.de
bpf: Free reuseport cBPF prog after RCU grace period.
Eulgyu Kim reported the splat below with a repro. [0]
The repro sets up a UDP reuseport group with a cBPF prog and
replaces it with a new one while another thread is sending
a UDP packet to the group.
The reuseport prog is freed by sk_reuseport_prog_free().
bpf_prog_put() is called for "e"BPF prog to destruct through
multiple stages while cBPF prog is freed immediately by
bpf_release_orig_filter() and bpf_prog_free().
If a reuseport prog is detached from the setsockopt() path
(reuseport_attach_prog() or reuseport_detach_prog()),
sk_reuseport_prog_free() is called without waiting for RCU
readers to complete, resulting in various bugs.
Let's defer freeing the reuseport cBPF prog after one RCU
grace period.
Note "e"BPF prog is safe as is unless the fast path starts
to touch fields destroyed in bpf_prog_put_deferred() and
__bpf_prog_put_noref().
Linus Torvalds [Fri, 8 May 2026 20:18:13 +0000 (13:18 -0700)]
Merge tag 'block-7.1-20260508' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix for ublk not doing an actual issue from the task_work fallback
path. Any request hitting that should be canceled automatically
- Fix for uring_cmd prep side handling, for the block side uring_cmd
discard handling
- Fix for missing validation of the io and physical block size shifts
- Fix for a use-after-free in ublk's cancel command handling
* tag 'block-7.1-20260508' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
ublk: fix use-after-free in ublk_cancel_cmd()
ublk: validate physical_bs_shift, io_min_shift and io_opt_shift
block: only read from sqe on initial invocation of blkdev_uring_cmd()
ublk: don't issue uring_cmd from fallback task work
Linus Torvalds [Fri, 8 May 2026 20:12:48 +0000 (13:12 -0700)]
Merge tag 'io_uring-7.1-20260508' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Ensure that the absolute timeouts for both the command side and the
waiting side honor the callers time namespace
- Ensure tracked NAPI entries are cleared at unregistration time, as
the NAPI polling loop checks the list state rather than the general
NAPI state. This can lead to NAPI polling even after unregistration
has been done. If unregistered, all NAPI polling should be disabled
- Fix for eventfd recursive invocation handling
* tag 'io_uring-7.1-20260508' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/wait: honour caller's time namespace for IORING_ENTER_ABS_TIMER
io_uring/timeout: honour caller's time namespace for IORING_TIMEOUT_ABS
io_uring/eventfd: reset deferred signal state
io_uring/napi: clear tracked NAPI entries on unregister
bpf: tcp: Fix type confusion in sol_tcp_sockopt().
sol_tcp_sockopt() only checks if sk->sk_protocol is IPPROTO_TCP,
but RAW socket can bypass it:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP)
Let's use sk_is_tcp().
Note that initially sol_tcp_sockopt() checked sk->sk_prot->setsockopt.
Fixes: 2ab42c7b871f ("bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20260504210610.180150-7-kuniyu@google.com
mptcp: bpf: Fix type confusion in bpf_mptcp_sock_from_subflow()
bpf_mptcp_sock_from_subflow() only checks if sk->sk_protocol is
IPPROTO_TCP, but RAW socket can bypass it:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP)
In this case, it would NOT be valid to call sk_is_mptcp() which will
assume sk is a pointer to a struct tcp_sock, and wrongly checks for:
tcp_sk(sk)->is_mptcp.
Linus Torvalds [Fri, 8 May 2026 17:24:35 +0000 (10:24 -0700)]
Merge tag 'v7.1-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix for two ACL issues (security fix to validate dacloffset better
and chmod fix)
- Fix out of bounds reads (in check_wsl_eas and smb2_check_msg for
symlinks)
- Two Kerberos fixes including an important one when AES-256 encryption
chosen
- Fix open_cached_dir problem when directory leases disabled
* tag 'v7.1-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: validate dacloffset before building DACL pointers
smb/client: fix out-of-bounds read in smb2_compound_op()
smb/client: fix out-of-bounds read in symlink_data()
smb: client: Zero-pad short GSS session keys per MS-SMB2
smb: client: Use FullSessionKey for AES-256 encryption key derivation
smb: client: use kzalloc to zero-initialize security descriptor buffer
cifs: abort open_cached_dir if we don't request leases
Linus Torvalds [Fri, 8 May 2026 17:14:51 +0000 (10:14 -0700)]
Merge tag 'spi-fix-v7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's two main series here, fixing issues that came up in the
Microchip QSPI and Freescale i.MX drivers. Both of those could result
in some quite noticable issues if they were encountered in production.
We also have one minor documentation fix in the ch341 driver"
* tag 'spi-fix-v7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: ch341: correct company name in MODULE_DESCRIPTION
spi: microchip-core-qspi: remove some inline markings
spi: microchip-core-qspi: don't attempt to transmit during emulated read-only dual/quad operations
spi: microchip-core-qspi: control built-in cs manually
spi: imx: Propagate prepare_transfer() error from spi_imx_setupxfer()
spi: imx: Fix UAF on package-1 prepare failure in spi_imx_dma_data_prepare()
spi: imx: Fix precedence bug in spi_imx_dma_max_wml_find()
The buggy address belongs to the object at ffff88801083d280
which belongs to the cache RAW of size 1792
The buggy address is located 1248 bytes inside of
allocated 1792-byte region [ffff88801083d280, ffff88801083d980)
Fixes: 655a51e536c0 ("bpf: Add struct bpf_tcp_sock and BPF_FUNC_tcp_sock") Reported-by: Damiano Melotti <melotti@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20260504210610.180150-2-kuniyu@google.com
Linus Torvalds [Fri, 8 May 2026 15:23:06 +0000 (08:23 -0700)]
Merge tag 'drm-fixes-2026-05-08-1' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, lots of them but all pretty small, amdgpu and xe are the
usual but then a large amount of fixes all over.
xe:
- Add NULL check for media_gt in intel_hdcp_gsc_check_status
- Fix EAGAIN sign in pf_migration_consume
- Fix MMIO access using PF view instead of VF view during migration
- Exclude indirect ring state page from ADS engine state size
* tag 'drm-fixes-2026-05-08-1' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
drm: Set old handle to NULL before prime swap in change_handle
drm/bochs: Drop manual put on probe error path
drm/xe/guc: Exclude indirect ring state page from ADS engine state size
drm/xe/pf: Fix MMIO access using PF view instead of VF view during migration
drm/xe/pf: Fix EAGAIN sign in pf_migration_consume()
drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status()
drm/exynos: remove bridge when component_add fails
drm/amdgpu: nuke amdgpu_userq_fence_slab v2
drm/amdgpu/userq: fix access to stale wptr mapping
drm/amdkfd: Check if there are kfd porcesses using adev by kfd_processes_count
drm/amdgpu: zero-initialize GART table on allocation
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
drm/radeon: add missing revision check for CI
drm/amdgpu/pm: align Hawaii mclk workaround with radeon
drm/amdgpu/pm: add missing revision check for CI
drm/amdgpu/gfx9: drop unnecessary 64-bit fence flag check in KIQ
drm/amdkfd: Make all TLB-flushes heavy-weight
drm/panel: himax-hx83102: restore MODE_LPM after sending disable cmds
drm/panel: boe-tv101wum-nl6: restore MODE_LPM after sending disable cmds
drm/panel: feiyang-fy07024di26a30d: return display-on error
...
Linus Torvalds [Fri, 8 May 2026 15:16:07 +0000 (08:16 -0700)]
Merge tag 'iommu-fixes-v7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"Core:
- Cache-flushing fix for non-x86 platforms
AMD-Vi:
- Security fix when SEV-SNP is enabled
- Operator precedence fix in DTE setting"
* tag 'iommu-fixes-v7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/amd: Fix precedence order in set_dte_passthrough()
iommu/pages: Fix iommu_pages_flush_incoherent() for non-x86
iommu/amd: Use maximum PPR log buffer size when SNP is enabled on Family 0x19
iommu/amd: Use maximum Event log buffer size when SNP is enabled on Family 0x19
Ming Lei [Fri, 8 May 2026 12:37:46 +0000 (20:37 +0800)]
ublk: fix use-after-free in ublk_cancel_cmd()
When ublk_reset_ch_dev() clears io->cmd via ublk_queue_reinit()
concurrently with ublk_cancel_cmd(), ublk_cancel_cmd() can read a
stale pointer and pass it to io_uring_cmd_done(), causing a
use-after-free.
Fix by synchronizing the two paths with ubq->cancel_lock:
- ublk_cancel_cmd(): read and clear io->cmd under cancel_lock,
then call io_uring_cmd_done() on the saved local copy outside
the lock.
- ublk_reset_ch_dev(): hold cancel_lock across ublk_queue_reinit()
so that io->cmd and io->flags are cleared atomically with respect
to ublk_cancel_cmd().
Francis, David [Tue, 28 Apr 2026 19:25:50 +0000 (19:25 +0000)]
drm: Set old handle to NULL before prime swap in change_handle
There was a potential race condition in change_handle. The ioctl
briefly had a single object with two idr entries; a concurrent
gem_close could delete the object and remove one of the handles
while leaving the other one dangling, which could subsequently
be dereferenced for a use-after-free.
To fix this, do the same dance that gem_close itself does.
(f6cd7daecff5 drm: Release driver references to handle before making it available again)
First idr_replace the old handle to NULL. Later, if the prime
operations are successful, actually close it.
create_tail required a similar dance to avoid a similar problem.
(bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail())
It idr_allocs the new handle with NULL, then swaps in the correct
object later to avoid races. We don't need to do that here, since
the only operations that could race are drm_prime, and
change_handle holds the prime lock for the entire duration.
v2: cleanups of error paths
Signed-off-by: David Francis <David.Francis@amd.com> Co-authored-by: Dave Airlie <airlied@gmail.com> Reported-by: Puttimet Thammasaeng <pwn8official@gmail.com> Tested-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: stable@vger.kernel.org Cc: Christian Koenig <Christian.Koenig@amd.com> Fixes: 53096728b8910 ("drm: Add DRM prime interface to reassign GEM handle") Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Fri, 8 May 2026 00:26:43 +0000 (17:26 -0700)]
Merge tag 'selinux-pr-20260507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Allow for multiple opens of /sys/fs/selinux/policy
Prevent a single process from blocking others from reading the
SELinux policy loaded in the kernel. This does have the side effect
of potentially allowing userspace to trigger additional kernel memory
allocations as part of the open/read operation, but this is mitigated
by requiring the SELinux security/read_policy permission.
- Reduce the critical sections where the SELinux policy mutex is held
This includes the patch to the policy loader code where we move the
permission checks and an allocation outside the mutex as well as the
the patch to checkreqprot which drops the code/lock entirely.
While the checkreqprot code had effectively been dropped in an
earlier release, portions of the code still remained that would have
triggered the mutex to perform an IMA measurement. This finally drops
all of that while preserving the user visible behavior.
- Eliminate potential sources of log spamming
There were a few areas where processes could flood the system logs
and hide other, more critical events. The previously disabled
checkreqprot and runtime disable knobs in selinuxfs were two such
areas that have now been greatly simplified and a pr_err() replaced
with a pr_err_once().
The third such place is the /sys/fs/selinux/user file, which hasn't
been used by a userspace release since 2020 and was scheduled for
removal after 2025; this effectively disables this functionality, but
similar to checkreqprot, it is done in a way that should not break
old userspace.
* tag 'selinux-pr-20260507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: shrink critical section in sel_write_load()
selinux: allow multiple opens of /sys/fs/selinux/policy
selinux: prune /sys/fs/selinux/user
selinux: prune /sys/fs/selinux/disable
selinux: prune /sys/fs/selinux/checkreqprot
Tabrez Ahmed [Sat, 2 May 2026 02:08:42 +0000 (07:38 +0530)]
hwmon: (ads7871) Fix endianness bug in 16-bit register reads
The ads7871_read_reg16() function relies on spi_w8r16() to read the
16-bit sensor output. The ADS7871 device transmits the Least Significant
Byte (LSB) first.
On Little-Endian architectures, spi_w8r16() correctly reconstructs the
16-bit value. However, on Big-Endian architectures, the byte swapping
causes the first received byte (LSB) to be placed in the most significant
byte of the u16, resulting in corrupted voltage readings.
To fix this, cast the integer result of spi_w8r16() to a restricted
__le16 type and convert it to the host CPU's native byte order using
le16_to_cpu(). Negative error codes returned by the SPI core are caught
and returned prior to the conversion to avoid mangling the error status.
Reported-by: Sashiko <sashiko-bot@kernel.org> Closes: https://sashiko.dev/#/patchset/20260418034601.90226-1-tabreztalks@gmail.com Fixes: e0c70b8078629 ("hwmon: add TI ads7871 a/d converter driver") Suggested-by: David Laight <david.laight.linux@gmail.com> Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com> Link: https://lore.kernel.org/r/20260502020844.110038-2-tabreztalks@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sensors configurations are defined by set and clear masks. These
do not follow a consistent "clear mask is a superset of set mask"
rule. This relaxed definition breaks lm75_write_config()
Basically all bits from set_mask that are not defined in clr_mask are
dropped. Fix that by enhancing the helper to always combine clr_mask
and set_mask into the mask bits of regmap_update_bits().
hwmon: (lm75) Fix AS6200 and TMP112 setup and alarm handling
The initialization of the AS6200 has two shortcomings
- The device-add-commit states "Conversion mode: continuous" but the
the lm75_params structure uses set_mask = 0x94c0. This activates
single shot mode (bit 15). According to the datasheet "The device
features a single shot measurement mode if the device is in sleep
mode (SM=1)". This is quite contradictionary.
- It is the only device that activates polarity active-high (bit 10)
All this is paired with a undefined clear mask bug in function
lm75_write_config() that was introduced with a later refactoring
commit.
[as6200] = {
.config_reg_16bits = true,
.set_mask = 0x94C0,
-> .clr_mask not defined here
.default_resolution = 12,
...
static inline int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
return regmap_update_bits(data->regmap, LM75_REG_CONF,
clr_mask | LM75_SHUTDOWN, set_mask);
}
regmap_update_bits() requires clr_mask to be a superset of set_mask.
So basically all sensors with "wrong" masks like the AS6200 are not
initialized as intended.
Fix that by
- Change the set_mask to 0xc010 to reflect the current active-low
setup properly and to drive the sensor in continous mode. This
takes into account that the config register is little endian and
the first byte sent to the chip is the LSB.
- Adapt the alarm handling so it can report the alarm correctly
even if it is high active. This is done by comparing config register
bit 5 and 10 (translated to 2 and 13).
This commit does not introduce any ABI breakage as the mutliple bugs
effectly drive the AS6200 in standard active-low mode.
Fixes: 4b6358e1fe46 ("hwmon: (lm75) Add AMS AS6200 temperature sensor") Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: https://lore.kernel.org/r/20260502173207.3567876-2-markus.stockhausen@gmx.de
[groeck: Update set_mask for as6200 further: As modeled, the upper bits
contain the conversion rate, so the config register needs to be set to
0xc010 instead of 0x10c0 to reflect 8 samples/s and 4 consecutive faults.
Fix the same problem for TMP112.] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Dave Airlie [Thu, 7 May 2026 22:51:01 +0000 (08:51 +1000)]
Merge tag 'drm-xe-fixes-2026-05-07' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Add NULL check for media_gt in intel_hdcp_gsc_check_status (Gustavo)
- Fix EAGAIN sign in pf_migration_consume (Shuicheng)
- Fix MMIO access using PF view instead of VF view during migration (Shuicheng)
- Exclude indirect ring state page from ADS engine state size (Satya)
Dave Airlie [Thu, 7 May 2026 22:34:34 +0000 (08:34 +1000)]
Merge tag 'drm-rust-fixes-2026-05-07' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-fixes
DRM Rust fixes for v7.1-rc3
- Fix unsound initialization in drm::Device::new(); if pinned
initialization of drm::Device::Data fails, make sure
drm::Device::release() isn't called, so we don't run the data's
destructor
- Fix missing GEM state cleanup in the init failure case; call
drm_gem_private_object_fini() if drm_gem_object_init() fails
- Fix wrong ARef import in the DRM shmem GEM helper abstraction
- Replace the nouveau mailing list with the new nova-gpu mailing list
for both nova-core and nova-drm, and remove unused patchwork entries
projects / linux / log