These are tidyup details of mediatek drivers. Basically there is no
functional change. This is prepare for later Card capsuling.
This makes code review easy when Card capsuling happen.
Zhao Dongdong [Wed, 10 Jun 2026 07:20:43 +0000 (15:20 +0800)]
ASoC: SOF: topology: fix memory leak in snd_sof_load_topology
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup.
Fixes: 99c159279c6d ("ASoC: SOF: don't check the existence of dummy topology") Cc: stable@vger.kernel.org Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/tencent_3EED6D778DC52C3703A2D1EE8119372E8E08@qq.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Thu, 11 Jun 2026 19:59:21 +0000 (20:59 +0100)]
ASoC: mediatek: Use guard() for mutex & spin locks
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts mutex and spinlock handling in Mediatek ASoC drivers
to use guard() helpers.
Most patches are straightforward conversions to guard() helpers with no
functional change intended.
One exception is mt8192-afe-gpio, where the mutex release point moves from
immediately before dev_warn() to scope exit. However, the affected path
only emits a warning and immediately returns -EINVAL, without any further
processing.
ASoC: mediatek: mt8192: mt8192-afe-gpio: Use guard() for mutex locks
Convert the explicit mutex_lock()/mutex_unlock() pair to guard(mutex)
to simplify the locking logic and automatically release the mutex on
all exit paths.
This changes the mutex release point from immediately before dev_warn()
to automatic cleanup at scope exit. However, the affected path only emits
a warning and immediately returns -EINVAL, without any further processing.
Mark Brown [Thu, 11 Jun 2026 19:50:31 +0000 (20:50 +0100)]
ASoC: rockchip: Use guard() for spin locks
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts spinlock handling in the Rockchip sound drivers
to use guard() helpers.
The changes are code cleanup only and should have no functional impact.
Mark Brown [Thu, 11 Jun 2026 19:49:43 +0000 (20:49 +0100)]
ASoC: rockchip: Reorder clock enable sequence
bui duc phuc <phucduc.bui@gmail.com> says:
This series reorders the runtime resume clock enable sequence in the
Rockchip SPDIF and PDM drivers to enable the bus clock before the
functional controller clock.
It also updates the SPDIF DT binding clock descriptions to match the
actual clock usage in the driver.
Additionally, this v2 adds two new patches addressing issues reported
by the Sashiko AI Review tool regarding regcache sync failure handling
and runtime PM resume status validation.
Testing:
- Patch 1: Verified (dt_binding_check passed).
- Patches 2 to 5: Compile tested only. Please help test if you have
the relevant Rockchip hardware.
ASoC: rockchip: rockchip_pdm: Handle runtime PM resume failures in set_fmt
rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing
hardware registers, but ignores its return value.
If the runtime resume fails, the function continues to perform register
accesses while the device state is undefined.
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
return early on failure to avoid unpowered register accesses.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org> Closes: https://lore.kernel.org/all/20260522110302.349421F000E9@smtp.kernel.org/ Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260602101608.45137-6-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: rockchip: spdif: Restore regcache cache-only mode on sync failure
If regcache_sync() fails during runtime resume, the driver disables the
clocks and returns an error. However, the regmap cache-only mode is left
disabled.
Restore cache-only mode in the error path so subsequent register accesses
continue to use the cache while the device is inactive.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org> Closes: https://lore.kernel.org/all/20260522103713.6C09D1F000E9@smtp.kernel.org/ Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260602101608.45137-5-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Enable the 'hclk' bus clock before the 'clk' controller clock during
runtime resume.
The bus clock provides the register access interface, so enable it before
the controller clock. This also makes the resume sequence the reverse of
the suspend sequence, which keeps the clock ordering consistent.
Enable the 'hclk' bus clock before the 'mclk' controller clock during
runtime resume.
The bus clock provides the register access interface, so enable it before
the controller clock. This also makes the resume sequence the reverse of
the suspend sequence, which keeps the clock ordering consistent.
Sen Wang [Wed, 3 Jun 2026 21:18:30 +0000 (16:18 -0500)]
ASoC: ti: davinci-mcasp: Add audio-graph-card2 and DPCM support
Extend the McASP driver to support audio-graph-card2 of-graph topology,
while maintaining backwards compatibility for existing simple-audio-card
phandles and machine drivers, which now uses the default MCASP_GRAPH_NONE
code path.
Cássio Gabriel [Thu, 4 Jun 2026 03:10:58 +0000 (00:10 -0300)]
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings.
Fixes: 64527e8a3529 ("ASoC: topology: Add FE DAIs dynamically") Fixes: acfc7d46cddc ("ASoC: topology: Add FE DAI links dynamically") Fixes: 0038be9a84dc ("ASoC: topology: Add support for configuring existing BE DAIs") Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com> Link: https://patch.msgid.link/20260604-asoc-topology-check-pcm-dai-names-v1-1-e1b0f6f7c2ce@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:14 +0000 (11:27 +0100)]
ASoC: cs35l56: Remove unnecessary conditionals waiting for enumeration
Commit [1] updated the core to use complete_all() which means that
the wait_for_completion() will now simply return if the device
is already attached, so skipping the completion isn't required
anymore. Update the code to simply call sdw_slave_wait_for_init()
unconditionally.
Charles Keepax [Mon, 8 Jun 2026 10:27:13 +0000 (11:27 +0100)]
ASoC: SDCA: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260608102714.2503120-10-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:12 +0000 (11:27 +0100)]
ASoC: wcd939x: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260608102714.2503120-9-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:11 +0000 (11:27 +0100)]
ASoC: wcd938x: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260608102714.2503120-8-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:10 +0000 (11:27 +0100)]
ASoC: wcd937x: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260608102714.2503120-7-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:09 +0000 (11:27 +0100)]
ASoC: pm4125: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260608102714.2503120-6-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:08 +0000 (11:27 +0100)]
ASoC: rt5682: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260608102714.2503120-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:06 +0000 (11:27 +0100)]
ASoC: wsa881x: Use new SoundWire enumeration helper
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it can be used for code that also doesn't check this
flag. Update the driver to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260608102714.2503120-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 8 Jun 2026 10:27:05 +0000 (11:27 +0100)]
soundwire: Always wait for initialisation of unattached devices
Currently in sdw_slave_wait_for_init() the waiting can be skipped
if unattach_request is not set. Doing so was added in [1] likely
because the core used to do a complete() on the completion so
waiting in the case an unattach hadn't actually happened would
block for the full timeout. However patch [2] updated the core to
use complete_all() which means that the wait_for_completion() will
now simply return if the device is already attached skipping the
completion doesn't add much.
Additionally, unattach_request is only set if the host initiates
a bus reset. However, the host doing a bus reset is not the only
reason a device may be unattached from the bus. Other options
could include the driver probing before the device enumerates, a
sync-loss, or the device itself powering down.
Removing the skip using unattached_request, doesn't cost much in
terms of efficiency and allows the sdw_slave_wait_for_init() helper
to be used outside of runtime resume.
[1] b2bd75f806c4 ("soundwire: sdw_slave: track unattach_request to handle all init sequences")
[2] c40d6b3249b1 ("soundwire: fix enumeration completion")
Mark Brown [Thu, 11 Jun 2026 19:44:46 +0000 (20:44 +0100)]
ASoC: Validate written enum values in custom controls
HyeongJun An <sammiee5311@gmail.com> says:
Some custom ASoC kcontrol put() handlers use the written enum value
(ucontrol->value.enumerated.item[0]) to index a table or compute a bit
shift before validating that the value is within the control's enum range.
An out-of-range value written from userspace is therefore consumed before
it is rejected.
This is the same class addressed for the Meson codecs in commit 1e001206804b ("ASoC: meson: g12a-tohdmitx: Validate written enum values")
and commit 3150b70e944e ("ASoC: meson: g12a-toacodec: Validate written
enum values").
Fix four more instances:
- hdac_hdmi reads e->texts[item] before validation.
- aiu converts the item before validating it.
- fsl_audmix converts the item and uses the result before validation.
- tegra210_ahub reads e->values[item] before validation.
HyeongJun An [Tue, 9 Jun 2026 12:43:16 +0000 (21:43 +0900)]
ASoC: tegra: tegra210_ahub: Validate written enum value
tegra_ahub_put_value_enum() reads e->values[item[0]] before
checking whether item[0] is within the enum item range. The existing
check therefore happens too late to prevent an out-of-range read of the
values array.
Move the check before the array access.
Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An <sammiee5311@gmail.com> Link: https://patch.msgid.link/20260609124317.38046-5-sammiee5311@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
HyeongJun An [Tue, 9 Jun 2026 12:43:15 +0000 (21:43 +0900)]
ASoC: fsl: fsl_audmix: Validate written enum values
fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src()
convert the user-provided enum item with snd_soc_enum_item_to_val()
before checking whether the item is within the enum's item count.
The generic snd_soc_put_enum_double() helper performs that
validation, but these callbacks use the converted value first: the
clock-source path tests it with BIT(), and the output-source path
indexes the prms transition table with it.
Reject out-of-range enum items before converting them.
Fixes: be1df61cf06e ("ASoC: fsl: Add Audio Mixer CPU DAI driver") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An <sammiee5311@gmail.com> Link: https://patch.msgid.link/20260609124317.38046-4-sammiee5311@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
HyeongJun An [Tue, 9 Jun 2026 12:43:14 +0000 (21:43 +0900)]
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls.
Fixes: b82b734c0e9a ("ASoC: meson: aiu: add hdmi codec control support") Fixes: 65816025d461 ("ASoC: meson: aiu: add internal dac codec control support") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An <sammiee5311@gmail.com> Link: https://patch.msgid.link/20260609124317.38046-3-sammiee5311@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
HyeongJun An [Tue, 9 Jun 2026 12:43:13 +0000 (21:43 +0900)]
ASoC: codecs: hdac_hdmi: Validate written enum value
hdac_hdmi_set_pin_port_mux() uses the written enum value to index the
texts array before calling snd_soc_dapm_put_enum_double(), which validates
that the value is within the enum item range.
An out-of-range value can therefore make the driver read past the texts
array before the helper rejects the write. Move the lookup after the helper
has accepted the value.
Mark Brown [Thu, 11 Jun 2026 19:43:33 +0000 (20:43 +0100)]
ASoC: img: Use guard() for spin locks
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts spinlock handling in several IMG ASoC drivers
to use guard() helpers.
All patches are straightforward cleanups with no functional change
intended.
When SND_SOC_SOF_INTEL_LNL is set, SND_SOF_SOF_HDA_SDW_BPT must also
be enabled, in order to let the soundwire support call into it.
However, there are configurations with SND_SOF_SOF_HDA_SDW_BPT=m
and SND_SOF_SOF_HDA_SDW_BPT=m but SOUNDWIRE_INTEL=y, which still
lead to a link failure:
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0xfc8): undefined reference to `hda_sdw_bpt_wait'
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x1ff8): undefined reference to `hda_sdw_bpt_get_buf_size_alignment'
Address this by moving the 'select SND_SOF_SOF_HDA_SDW_BPT' into
SND_SOC_SOF_HDA_GENERIC.
Fixes: 614d416dd8ae ("ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20260611132310.137688-2-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Arnd Bergmann [Thu, 11 Jun 2026 13:23:05 +0000 (15:23 +0200)]
ASoC: SOF: Intel: select SND_SOC_SDW_UTILS=y from SND_SOC_SOF_HDA_GENERIC=y
When SND_SOC_SOF_HDA_GENERIC=y but SND_SOC_SOF_INTEL_SOUNDWIRE=m, the
SND_SOC_SDW_UTILS is also set to =m even though there is a direct link
dependency from the hda.c:
aarch64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_machine_select':
hda.c:(.text+0x21ac): undefined reference to `codec_info_list'
hda.c:(.text+0x241c): undefined reference to `asoc_sdw_get_dai_type'
hda.c:(.text+0x25b4): undefined reference to `asoc_sdw_get_codec_info_list_count'
hda.c:(.text+0x25d8): undefined reference to `asoc_sdw_get_codec_info_list_count'
Change this the same way as the other related 'select' statements
to allow linking against it.
Fixes: 2b4d53eb5cf3 ("ASoC: SOF: Intel: select SND_SOC_SDW_UTILS in SND_SOC_SOF_HDA_GENERIC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Julian Braha <julianbraha@gmail.com> Link: https://patch.msgid.link/20260611132310.137688-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: cs35l56: Fix wrong error test on simple_write_to_buffer()
In cs35l56_cal_data_debugfs_write() fix the if statement that checks for
error return to only check for negative values.
Reported by Sashiko:
simple_write_to_buffer() returns the positive number of bytes copied
on success. Since the condition returns immediately on any non-zero
value, is it possible that the written calibration data is discarded
and cs35l56_stash_calibration() is never called?
ASoC: soc-core: Create device_link to ensure correct suspend order
In snd_soc_bind_card() create a device_link from card to all components
to ensure correct order of system_suspend. The card is the consumer and
the components are the supplier, so that the card will system_suspend
before any of the components.
The PM core will normally system_suspend drivers in the opposite order
that they registered. This ensures children are suspended before their
parents, for example users of a bus driver should suspend before the bus
driver suspends.
For ASoC, snd_soc_suspend() shuts down any active audio, which requires
that the components are still able to communicate with their hardware.
Previously there was nothing to ensure this ordering, because there is
(usually) no relationship between a machine driver and component drivers.
If the machine driver registered before the codec drivers, the codec
drivers would be suspended before the machine driver snd_soc_suspend()
runs, so that ASoC is attempting to stop audio on a driver that has
already suspended.
Creating a device_link is safe if there is already a device_link between
those devices because of multiple components sharing the same dev.
device_link_add() kernel doc says:
"if a device link between the given @consumer and @supplier pair
exists already when this function is called for them, the existing link
will be returned regardless of its current type and status ...
The caller of this function is then expected to treat
the link as though it has just been created, so (in particular) if
DL_FLAG_STATELESS was passed in @flags, the link needs to be released
explicitly when not needed any more"
For the same reason it is safe if the codec driver or machine driver
later call device_link_add() to create a link between the same two
devices.
(I have tested creating multiple links between the card->dev and a
component->dev and did not encounter any problems with suspend/resume or
module unloading.)
The DL_FLAG_AUTOREMOVE_* flags assume that they are being called from
the probe() function of that device. This isn't guaranteed in ASoC card
binding because of deferred binding. The exact behavior and consequences
of the DL_FLAG_AUTOREMOVE_* are also unclear from the documentation.
So DL_FLAG_STATELESS is used for safety, and the links are removed
explicitly when the card unbinds or if the bind fails.
ASoC: cs35l56: Fix possible uninitialized value in cs35l56_spi_system_reset()
In cs35l56_spi_system_reset() initialize val to zero before using it in
the read_poll_timeout(). This prevents testing an uninitialized value if
the regmap_read_bypassed() returns an error.
Read errors are intentionally ignored during this loop because the
device is resetting (though SPI can't really detect that so shouldn't
fail because of that, it's safer to ignore errors and keep polling).
Because of this, val must be initialized to something in case the first
read fails. The polling loop is looking for a non-zero value, so
initializing val to 0 will ensure that the loop continues until a valid
state is read from the device or it times out.
Felix Gu [Wed, 10 Jun 2026 12:08:17 +0000 (20:08 +0800)]
spi: rzv2h-rspi: Fix SPDR read access width for 16-bit RX
The RZ/V2H hardware manual (section 7.5.2.2.1) specifies that read access
size for the SPI Data Register (SPDR) are fixed at 32 bits. The
RZV2H_RSPI_RX macro for the 16-bit data path used readw(), violating
this requirement.
Switch to readl() for the 16-bit RX path to conform to the hardware
specification.
Fixes: 8b61c8919dff ("spi: Add driver for the RZ/V2H(P) RSPI IP") Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felix Gu <ustc.gu@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://patch.msgid.link/20260610-rzv2h-rspi-v2-1-40c80b4a2c90@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Basically, we are assuming to use snd_soc_register_component() (X) to
register Component. It requests Component driver (A).
And, current Component has .debugfs_prefix (B).
Now we can set component->debugfs_prefix (B) via
component_driver->debugfs_prefix (A) today.
But some drivers are still trying to set it via (B).
Thus, they need to use snd_soc_component_initialize() (1) /
snd_soc_component_add() (2) instead of (X), because they need to
access component->debugfs_prefix (B).
These functions (= 1, 2) should be capsuled into soc-xxx.c, but can't
because of above drivers.
This patch-set removes component->debugfs_prefix (B).
The functions (= 1, 2) are still not yet be capsuled.
This is step1 for it, step2 will be posted after this.
Cássio Gabriel [Wed, 3 Jun 2026 17:57:54 +0000 (14:57 -0300)]
ASoC: SOF: topology: validate vendor array size before parsing
sof_parse_token_sets() reads array->size while iterating over topology
private data. The loop condition only checks that some data remains, so a
malformed topology with a truncated trailing vendor array can make the
parser read the size field before a full vendor-array header is available.
Validate that the remaining private data contains a complete
snd_soc_tplg_vendor_array header before reading array->size.
The declared array size check also needs to remain signed. asize is an int,
but sizeof(*array) has type size_t, so comparing them directly promotes
negative asize values to unsigned and lets them pass the check,
as reported in the stable review thread reference below.
Cast sizeof(*array) to int when validating the declared array size. This
rejects negative, zero and otherwise too-small sizes before the parser
dispatches to the tuple-specific code.
Mark Brown [Wed, 10 Jun 2026 11:06:09 +0000 (12:06 +0100)]
ASoC: Use codec_info_list.is_amp directly in find_acpi_adr_device()
Bard Liao <yung-chuan.liao@linux.intel.com> says:
This series sets is_amp to all amp type codecs in codec_info_list[].
So that we can use the flag directly instead of using a local flag to
check if the codec is an AMP type. The flag will be used to set
different name_prefix for amp and non-amp codecs.
Bard Liao [Fri, 5 Jun 2026 10:18:04 +0000 (18:18 +0800)]
ASoC: soc_sdw_utils: add is_amp flag to all amps
The is_amp flag will be used for the codec name_prefix.
We detect it by checking if the codec support endpoints other than amp.
However, it is not accurate. Currently, the is_amp flag is only set to
the amps that include other types of endpoints. But it can't cover the
case that a monolithic codec that only the amp endpoint is present.
Add the is_amp flag to all amp type codecs and will set the name_prefix
by the flag in the follow up commit.
Due to a communication miss, the Ecovec24/7724se Sound support
were removed. We need to keep them for a while, until they will
support "DT-style".
Roll back Ecovec24/7724se "platform data style", and its necessary header.
ASoC: renesas: fsi: remove platform data style support
Renesas FSI driver has created for "platform data style" first, and
expanded to "DT style".
SuperH Ecovec24/7724se are the last user of "platform data style", but
its sound should not work during almost 10 years, because Simple-Card's
"platform data style" is broken, but no one reported it.
SuperH is planning to switch to "DT style", "platform data style" is no
longer working, and it seems there is no user. Let's remove "platform
data style", because keeping compatibility is difficult.
Due to a communication miss, the Ecovec24/7724se Sound support
were removed. We need to keep them for a while, until they will
support "DT-style".
Roll back Ecovec24/7724se "platform data style", and its necessary header.
The tas2783 driver defines two functions tas25xx_register_misc and
tas25xx_deregister_misc which have stub implementations. It uses
external implementations if CONFIG_SND_SOC_TAS2783_UTIL is enabled, but
that symbol has never been present in the kernel. Therefore, these
functions are entirely unused. Remove them.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
If cs35l56_component_probe() fails, call cs35l56_component_remove() to
clean up.
All the cleanup in cs35l56_component_remove() is the same cleanup that
would need to be done (at least partially) if cs35l56_component_probe()
fails. So calling cs35l56_component_remove() avoids convoluted cleanup
gotos and duplicated code in cs35l56_component_probe().
The only action in cs35l56_component_remove() that is nominally
dependent on having completed the component_probe() action is the call
to wm_adsp2_component_remove(). Though it is currently safe to call that
even if wm_adsp2_component_probe() was not called. However,
wm_adsp2_component_probe() has been trivially updated to check itself
whether it needs to cleanup.
Invalidate the debugfs pointer after debugfs_remove_recursive() in
cs35l56_remove_cal_debugfs(). This prevents a double-free situation when
a future commit adds proper failure cleanup in cs35l56_component_probe().
As described by Sashiko (including the future cs35l56_component_probe()
cleanup commit):
During a normal component unbind, cs35l56_component_remove() calls
cs35l56_remove_cal_debugfs() which removes the directory but leaves
a dangling pointer.
If the component is later bound again, but _cs35l56_component_probe()
fails early (for example, if the init_completion times out), this new
error path will call cs35l56_component_remove(). This causes
cs35l56_remove_cal_debugfs() to be called again with the dangling
cs35l56_base->debugfs pointer from the previous lifecycle, resulting in
a use-after-free in debugfs_remove_recursive().
ASoC: cs35l56: Fix missing calls to wm_adsp2_remove()
Call wm_adsp2_remove() in cs35l56_remove() and the error path of
cs35l56_common_probe().
Depends on commit 7d3fb78b5503 ("ASoC: wm_adsp: Fix NULL dereference
when removing firmware controls").
The call to wm_halo_init() during driver probe should be paired with
a call to wm_adsp2_remove() but this was missing. The consequence
would be a memory leak of the control lists in the cs_dsp driver.
Add fsi_clk_prepare() and fsi_clk_unprepare() helpers and call them
from fsi_dai_startup() and fsi_dai_shutdown().
This ensures clk_prepare() and clk_unprepare() are executed from
sleepable contexts and keeps clocks prepared only while audio streams
are active.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-11-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
FSI register accesses on the r8a7740 require the SPU bus clock to be
enabled. Add support for acquiring and managing the SPU clock via the
device tree to ensure proper register access.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-10-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Move fsi_clk_init() from set_fmt() to the probe path.
This ensures that clock resources are acquired only once during device
initialization, instead of being looked up repeatedly whenever set_fmt()
is called.
Together with the previous conversion to devm_clk_get_optional(), the
driver can now probe successfully even when optional clocks are absent.
The set_rate() callbacks continue to validate that all required clocks
are available before applying hardware-specific configuration.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-9-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: renesas: fsi: Use devm_clk_get_optional() for optional clocks
The xck, ick, and div clocks are optional. Switch from devm_clk_get()
to devm_clk_get_optional() to correctly handle cases where these clocks
are missing.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-8-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: renesas: fsi: Fix register access from in-flight IRQ after shutdown
In-flight IRQs may still be running when the SPU clock is disabled,
leading to register access after shutdown and causing system hangs.
Fix this to use fsi_stream_is_working() when handling in-flight IRQ
handlers. If no streams are active, the handler now returns immediately
to prevent hardware access.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-6-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Move fsi_stream_is_working() before fsi_count_fifo_err().
This prepares for a subsequent patch that needs to check stream status
when handling in-flight IRQ handlers. No functional changwqes intended.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-5-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Call fsi_stream_stop() before fsi_hw_shutdown(). This matches the existing
order in the suspend path.
This change ensures all register accesses during stream shutdown are fully
completed before disabling the clocks.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260609113836.45079-4-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dt-bindings: renesas,fsi: add support multiple clocks
The FSI on r8a7740 requires the SPU bus/bridge clock to be enabled before
accessing its registers. Without this clock, any register access leads to
a system hang as the FSI block sits behind the SPU bus.
Update the binding to support multiple clocks to properly describe the
hardware clock tree, including:
- SPU bus/bridge clock (spu) for register access.
- CPG DIV6 clocks (icka/b) as functional clock.
- FSI dividers (diva/b) for audio clock generation.
- External clock inputs (xcka/b) provided by the board.
The hardware supports several valid clock configurations. For example,
when both FSIA and FSIB operate as slaves, only the fck and spu clocks
are required. When a port operates as a master, it can use either an
internal clock source (ickx + divx) or an external clock source
(ickx + xckx). Therefore, while fck and spu are mandatory on r8a7740,
the remaining clocks (icka/b, diva/b and xcka/b) are optional and depend
on the selected master/slave configuration and clock source.
Both sh73a0 and r8a7740 define the SPU DIV6 clock control register at
0xe6150084. The binding therefore documents the clocks supported by the
FSI driver for these variants.
Mark Brown [Tue, 9 Jun 2026 23:09:13 +0000 (00:09 +0100)]
ASoC: codecs: aw88261: fixes and cleanup
Val Packett <val@packett.cool> says:
The Awinic smart speaker/amp drivers were merged in a very
"downstream-brained" state, where configuration was only really
determined by the binary "firmware" (register list) file instead
of properly participating in the ASoC system. Let's start
untangling this mess. This series makes aw88261 actually usable
on devices like fairphone-fp5, motorola-dubai and xiaomi-pipa.
Val Packett [Fri, 29 May 2026 20:05:14 +0000 (17:05 -0300)]
ASoC: codecs: aw88261: make volume control usable
- Invert the value to match userspace expectations (in the hardware,
positive numbers represent negative dB attenuation)
- Provide TLV metadata for the dB scale (and divide the raw values by 2
as the excessive precision used by HW is not representable in TLV)
- Do not unnecessarily reset the volume while switching profiles
- Simplify aw88261_dev_set_volume using regmap_update_bits
- Do not add the initial volume from the profile to the requested volume
as that would throw off the dB mapping (if a lower max limit is
desired, it can be set in the UCM profile in userspace)
With this change, it's actually possible to use this hardware volume
control as PlaybackVolume in an ALSA UCM profile.
Val Packett [Fri, 29 May 2026 20:05:13 +0000 (17:05 -0300)]
ASoC: codecs: aw88261: fix incorrect masks for boost regs
The boost-related register fields used in aw88261_reg_force_set use the
exact same definitions as the rest of the fields, where the mask must be
inverted when passing it to regmap_update_bits, but they weren't
inverted here.
Fixes: 028a2ae25691 ("ASoC: codecs: Add aw88261 amplifier driver") Signed-off-by: Val Packett <val@packett.cool> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://patch.msgid.link/20260529200550.529719-7-val@packett.cool Signed-off-by: Mark Brown <broonie@kernel.org>
Val Packett [Fri, 29 May 2026 20:05:12 +0000 (17:05 -0300)]
ASoC: codecs: aw88261: remove async start
Codec drivers are not supposed to do anything like this. The result was
that the first second or so of playback was essentially inaudible, and
very short alert sounds could be missed entirely. Let's not do this.
Val Packett [Fri, 29 May 2026 20:05:10 +0000 (17:05 -0300)]
ASoC: codecs: aw88261: reduce log spam
This driver would create a wall of logspam during initialization due to
e.g. the PLL not being ready while waiting for it to stabilize. Change
intermediate dev_err() calls to dev_dbg() to reduce the noise.
While here, log the detected chip ID when that check fails.
Val Packett [Fri, 29 May 2026 20:05:08 +0000 (17:05 -0300)]
ASoC: codecs: aw88261: support changing sample rate and bit width
The aw88261 driver only worked with 32-bit 48kHz streams so far due to
the lack of a proper PLL initialization sequence. Fix by selecting all
the necessary PLL settings based on what was passed to us by the
hw_params/set_fmt ops. This replaces the strange downstream routine
that tries two divider modes in sequence.
Fixes: 028a2ae25691 ("ASoC: codecs: Add aw88261 amplifier driver") Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcm6490-fairphone-fp5 Signed-off-by: Val Packett <val@packett.cool> Link: https://patch.msgid.link/20260529200550.529719-2-val@packett.cool Signed-off-by: Mark Brown <broonie@kernel.org>
Cássio Gabriel [Tue, 9 Jun 2026 12:03:56 +0000 (09:03 -0300)]
ASoC: sma1307: Fix uevent string leaks in fault worker
sma1307_check_fault_worker() stores dynamically allocated uevent strings in
envp[0]. Several fault conditions are checked in sequence, so a later fault
can overwrite envp[0] before the final kfree() and leak the previous
allocation.
The same flow can leave an OT1 volume entry in envp[1] while envp[0]
has been overwritten by a later non-OT1 fault, causing an inconsistent
uevent payload.
Use static STATUS strings and a stack buffer for the optional VOLUME entry.
This removes the allocations from the worker and keeps VOLUME tied only
to the OT1 events that produce it.
projects / linux / log