Christian König [Mon, 20 Apr 2026 18:18:43 +0000 (20:18 +0200)]
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
The purpose of a GPU reset is to make sure that fence can be signaled
again and the signal and resume workers can make progress again.
So waiting for the resume worker or any fence in the GPU reset path is
just utterly nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Wed, 15 Apr 2026 02:34:03 +0000 (10:34 +0800)]
drm/amdkfd: bump KFD ioctl minor version to 1.23
Bump `KFD_IOCTL_MINOR_VERSION` from 22 to 23 and document version 1.23
in `kfd_ioctl.h` so userspace can detect profiler ioctl support.
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Tue, 10 Mar 2026 02:39:08 +0000 (10:39 +0800)]
drm/amdgpu: fix ptl state isssue after GPU reset or suspend
Fix this by skipping the sysfs disable mapping when the GPU is
currently undergoing a reset or suspend flow.
Additionally, add debug logging in psp_ptl_invoke() to better
trace PTL state and format queries/updates cmd.
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Fri, 13 Mar 2026 08:31:07 +0000 (16:31 +0800)]
drm/amdgpu/gfx9.4.3: skip PTL disable during GPU reset
During RAS UE-triggered GPU reset, gfx_v9_4_3_hw_fini() attempts to
send a PTL disable command to PSP. Since PSP is unresponsive at that
point, this produces spurious error logs on all hive nodes:
PTL command 0xa0000001 failed, PSP response status: 0xFFFFFFFF
PTL initialization failed (-5)
Skip the PTL disable command when GPU reset is in progress, as PTL
will be properly re-initialized during post-reset recovery via
gfx_v9_4_3_late_init().
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Thu, 26 Feb 2026 09:50:33 +0000 (17:50 +0800)]
drm/amdgpu: Move KFD sched stop/start into PTL control path
Move amdgpu_amdkfd_stop/start_sched calls from kfd_ptl_control()
into amdgpu_ptl_perf_monitor_ctrl() so all PTL callers (KFD ioctl,
sysfs, GFX init) get consistent scheduling management.
Add amdgpu_amdkfd_stop/start_sched_all() wrappers to stop and
restart KFD scheduling on all nodes without assuming node ID ordering.
v3:
* call start/stop for PTL Set Only
v2:
* move the stop/start sched function to
amdgpu_ptl_perf_monitor_ctrl(Lijo)
* add wrapper amdgpu_amdkfd_stop_sched_all and
amdgpu_amdkfd_start_sched_all (Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Mon, 23 Feb 2026 15:20:50 +0000 (23:20 +0800)]
drm/amdgpu: add SPI idle check for GC 9.4.4 in gfx_v9_4_3_is_idle()
GC 9.4.4 uses SPI busy status for idle detection instead of GRBM GUI_ACTIVE.
Add version check to use SPI_BUSY for 9.4.4 while keeping GRBM_STATUS
GUI_ACTIVE check for other GC versions.
v2: move this check into amdgpu_ptl_perf_monitor_ctrl(Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Sun, 8 Feb 2026 16:42:12 +0000 (00:42 +0800)]
drm/amdgpu: Wait for GFX idle before PTL state transition
Ensure GFX engine is idle before switching PTL state to prevent
register access violations and CP hang. This addresses the race
condition where in-flight GPU commands could conflict with PTL
state changes.
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Sun, 8 Feb 2026 16:42:09 +0000 (00:42 +0800)]
drm/amdgpu: Track PTL disable requests by source
Use a bitmap to track PTL disable requests from sysfs and profiler.
PTL is only re-enabled once all sources have released their disable
requests, avoiding premature enablement.
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Sun, 8 Feb 2026 16:42:08 +0000 (00:42 +0800)]
drm/amdkfd: suspend scheduler during PTL re-enabling
Stop the scheduler before releasing the PTL disable request to ensure
the GPU is quiescent during the PTL state transition. This prevents
potential queue preemption failures and GPU resets caused by modifying
PTL state while waves are executing
v1->v2:
only stop/start the scheduler when the PTL state actually needs to transition(Yifan)
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3 changes:
* move N/A to previous format in format show(Alex)
* fix format check for format store(Alex)
* drop the ptl declarations into amdgpu_ptl.h(Alex)
v2 changes:
* add usage commands in commit info (Alex)
* move amdgpu_ptl_fmt into kgd_kfd_interface.h (Alex)
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Sun, 8 Feb 2026 16:42:05 +0000 (00:42 +0800)]
Documentation/amdgpu: Add documentation for Peak Tops Limiter (PTL) sysfs interface
The PTL (Peak Tops Limiter) feature exposes per-GPU sysfs files under
/sys/class/drm/cardX/device/ptl/ to allow users to enable or disable PTL,
configure preferred data formats, and query supported formats. The usage
of these sysfs files is not always obvious, so add documentation to
describe their purpose and provide concrete usage examples.
V3 changes:
* format show will display preferred formats instead of N/A (Alex)
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Sun, 8 Feb 2026 16:42:03 +0000 (00:42 +0800)]
drm/amdgpu: add PTL enable/query gfx control support for GC 9.4.4
Introduce hardware detection, runtime state tracking and a
kgd->ptl_ctrl() callback to enable/disable/query PTL via the
PSP performance-monitor interface (commands 0xA0000000/1).
The driver now exposes PTL capability to KFD and keeps the
software state in sync with the hardware.
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Sun, 8 Feb 2026 16:42:02 +0000 (00:42 +0800)]
drm/amdgpu: add psp interfaces for peak tops limiter driver
Introduce a Peak Tops Limiter (PTL) driver that dynamically caps
engine frequency to ensure delivered TOPS never exceeds a defined
TOPS_limit. This initial implementation provides core data structures
and kernel-space interfaces (set/get, enable/disable) to manage PTL state.
PTL performs a firmware handshake to initialize its state and update
predefined format types. It supports updating these format types at
runtime while user-space tools automatically switch PTL state, and
also allows explicitly switching PTL state via newly added commands.
Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Benjamin Welton [Sun, 8 Feb 2026 16:42:00 +0000 (00:42 +0800)]
amd/amdkfd: Add kfd_ioctl_profiler to contain profiler kernel driver changes
kfd_ioctl_profiler takes a similar approach to that of
kfd_ioctl_dbg_trap (which contains debugger related IOCTL
services) where kfd_ioctl_profiler will contain all profiler
related IOCTL services. The IOCTL is designed to be expanded
as needed to support additional profiler functionality.
The current functionality of the IOCTL is to allow for profilers
which need PMC counters from GPU devices to both signal to other
profilers that may be on the system that the device has active PMC
profiling taking place on it (multiple PMC profilers on the same
device can result in corrupted counter data) and to setup the device
to allow for the collection of SQ PMC data on all queues on the device.
For PMC data for the SQ block (such as SQ_WAVES) to be available
to a profiler, mmPERFCOUNT_ENABLE must be set on the queues. When
profiling a single process, the profiler can inject PM4 packets into
each queue to turn on PERFCOUNT_ENABLE. When profiling system wide,
the profiler does not have this option and must have a way to turn
on profiling for queues in which it cannot inject packets into directly.
Accomplishing this requires a few steps:
1. Checking if the user has the necessary permissions to profile system
wide on the device. This check uses the same check that linux perf
uses to determine if a user has the necessary permissions to profile
at this scope (primarily if the process has CAP_SYS_PERFMON or is root).
2. Locking the device for profiling. This is done by setting a lock bit
on the device struct and storing the process that locked the device.
3. Iterating all queues on the device and issuing an MQD Update to enable
perfcounting on the queues.
4. Actions to cleanup if the process exits or releases the lock.
The IOCTL also contains a link to the existing PC Sampling IOCTL as well.
This is per a suggestion that we should potentially remove the PC Sampling
IOCTL to have it be a part of the profiler IOCTL. This is a future change.
In addition, we do expect to expand the profiler IOCTL to include
additional profiler functionality in the future (which necessitates the
use of a version number).
Signed-off-by: Benjamin Welton <benjamin.welton@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Acked-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 8 May 2026 04:14:24 +0000 (14:14 +1000)]
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Tomi Valkeinen [Wed, 11 Mar 2026 07:48:18 +0000 (09:48 +0200)]
drm/bridge: tc358768: Add support for long command tx via video buffer
TC358768 has two ways to send DSI commands: 1) buffer the payload data
into registers (DSICMD_WDx), which supports up to 8 bytes of payload, 2)
buffer the payload data into the video buffer, which supports up to 1024
bytes of payload.
The driver currently supports method 1).
Add support for transmitting long DSI commands (more than 8 bytes, up to
1024 bytes) using the video buffer. This mode can only be used before
the actual video transmission is enabled, i.e. the initial configuration.
Original version from Parth Pancholi <parth.pancholi@toradex.com>
Tomi Valkeinen [Wed, 11 Mar 2026 07:48:17 +0000 (09:48 +0200)]
drm/bridge: tc358768: Separate video format config
Sending long commands using the video buffer (to be implemented in
following patches) requires setting TC358768_DATAFMT and
TC358768_DSITX_DT registers for command transfer. The same registers
also need to be configured properly for video transfer.
The long commands will be sent between the bridge's pre_enable() and
enable(), and currently we configure the registers for video transfer in
pre_enable(). Thus, they would be overwritten by the long command
transfer code.
To prevent that from happening, set those registers for video transfer
in enable(), not in pre_enable().
Based on code from Parth Pancholi <parth.pancholi@toradex.com>
Tomi Valkeinen [Wed, 11 Mar 2026 07:48:16 +0000 (09:48 +0200)]
drm/bridge: tc358768: Add LP mode command support
Currently the driver ignores MIPI_DSI_MODE_LPM and always uses HS mode.
Add code to enable HS mode in pre_enable() only if MIPI_DSI_MODE_LPM is
not set, and always enable HS mode in enable() for video transmission.
Tomi Valkeinen [Wed, 11 Mar 2026 07:48:15 +0000 (09:48 +0200)]
drm/bridge: tc358768: Support non-continuous clock
The driver prints a warning if MIPI_DSI_CLOCK_NON_CONTINUOUS is set, and
falls back to continuous clock mode. This was added in commit fbc5a90e82c1 ("drm/bridge: tc358768: Disable non-continuous clock mode").
However, there have been multiple changes to the driver since then, and
at least in my setup, non-continuous clock mode works: I can see an
image on the panel, and I can see the clock lanes being non-continuous
with an oscilloscope.
So, let's enable MIPI_DSI_CLOCK_NON_CONTINUOUS support.
Cc: Dmitry Osipenko <digetx@gmail.com> Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62 Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Dmitry Osipenko <digetx@gmail.com> Link: https://patch.msgid.link/20260311-tc358768-v2-4-e75a99131bd5@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tomi Valkeinen [Wed, 11 Mar 2026 07:48:14 +0000 (09:48 +0200)]
drm/bridge: tc358768: Separate indirect register writes
Some registers can only be written indirectly, using DSI_CONFW register.
We don't have many uses for those registers (in fact, only DSI_CONTROL
is currently written), but the code to do those writes inline is a bit
confusing.
Add a new function, tc358768_confw_update_bits() which can be used to
write the bits indirectly. Only DSI_CONTROL is currently supported.
Parth Pancholi [Wed, 11 Mar 2026 07:48:13 +0000 (09:48 +0200)]
drm/bridge: tc358768: Set pre_enable_prev_first for reverse order
Enable the pre_enable_prev_first flag on the tc358768 bridge to reverse
the pre-enable order, calling bridge pre_enable before panel prepare.
This ensures the bridge is ready before sending panel init commands in
the case of panels sending init commands in panel prepare function.
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com> Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62 Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20260311-tc358768-v2-2-e75a99131bd5@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Shuicheng Lin [Fri, 1 May 2026 17:59:56 +0000 (17:59 +0000)]
drm/gpusvm: Drop redundant @flags.* kernel-doc on struct drm_gpusvm_pages
The kernel-doc block above struct drm_gpusvm_pages duplicates the
descriptions of the bit-flags that live in struct drm_gpusvm_pages_flags
using dotted notation (@flags.migrate_devmem, @flags.unmapped, ...).
That dotted notation is intended for nested anonymous structs/unions that
the parser flattens into the parent's parameter list. Here, however,
flags is of a named external type, so the parser does not flatten its
members and the dotted entries do not match any member of
drm_gpusvm_pages. They also duplicate the canonical descriptions already
present in the kernel-doc of struct drm_gpusvm_pages_flags itself.
Drop the five @flags.* lines and replace them with a single @flags entry
that cross-references the type via kernel-doc's "&struct ..." syntax.
This eliminates the redundancy and removes warnings emitted by the new
parameterdescs check in scripts/kernel-doc:
Excess struct member 'flags.migrate_devmem' description in
'drm_gpusvm_pages'
Excess struct member 'flags.unmapped' description in 'drm_gpusvm_pages'
Excess struct member 'flags.partial_unmap' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_devmem_pages' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_dma_mapping' description in
'drm_gpusvm_pages'
No functional change.
Assisted-by: Claude:claude-opus-4.6 Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260501175956.4054088-1-shuicheng.lin@intel.com
drm/bridge: microchip-lvds: fix bus format mismatch with VESA displays
The LVDS controller was hardcoded to JEIDA mapping, which leads to
distorted output on panels expecting VESA mapping.
Update the driver to dynamically select the appropriate mapping and
pixel size based on the panel's advertised media bus format. This
ensures compatibility with both JEIDA and VESA displays.
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patch.msgid.link/20250625-microchip-lvds-v6-3-7ce91f89d35a@microchip.com Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
drm/bridge: microchip-lvds: Remove unused drm_panel and redundant port node lookup
Drop the unused drm_panel field from the mchp_lvds structure, and remove
the unnecessary port device node lookup, as devm_drm_of_get_bridge()
already performs the required checks internally.
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Biju Das [Fri, 1 May 2026 06:11:58 +0000 (07:11 +0100)]
drm/bridge: ite-it6263: Move chip initialization code from probe to atomic_enable
On the RZ/G3L SMARC EVK, suspend to RAM powers down the ITE IT6263 chip.
The display controller driver's system PM callbacks invoke
drm_mode_config_helper_{suspend,resume}, which in turn call the bridge's
atomic_{disable,enable} callbacks to handle suspend/resume for the bridge
without dedicated PM ops.
To support proper reinitialization after power loss, move reset_gpio into
the it6263 struct so it is accessible beyond probe time. Relocate
it6263_hw_reset(), it6263_lvds_set_i2c_addr(), it6263_lvds_config() and
it6263_hdmi_config() from probe to atomic_enable, ensuring the chip is
fully reset and reconfigured on every enable, including after a
suspend/resume cycle.
Dave Airlie [Wed, 6 May 2026 00:12:18 +0000 (10:12 +1000)]
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
MAINTAINERS: Update maintainer for LT8912B DRM HDMI bridge
Update the maintainer from Adrien to Francesco. Adrien is not
interested in maintaining this driver anymore, Francesco has access to
various hardware devices using this component and the vendor
documentation.
Cc: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260430085344.34271-1-francesco@dolcini.it
MAINTAINERS: add Luca Ceresoli as reviewer for DRM bridge code
I am actively working on drm_bridge.c and recently also
drm_bridge_connector.c, especially for the DRM bridge hotplug work. Being
in Cc would ensure I won't miss related patches and can review them
promptly.
drm/panel: Clean up S6E3HA2 config dependencies and fill help text
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
drm/panel: Clean up S6E3FC2X01 config dependencies
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Marijn Suijten [Tue, 5 May 2026 13:53:40 +0000 (15:53 +0200)]
drm/panel: Clean up SOFEF00 config dependencies
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 5933baa36e26 ("drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Casey Connolly <casey.connolly@linaro.org> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-1-9cc31d6e6919@ixit.cz
Sunil Khatri [Mon, 4 May 2026 12:51:17 +0000 (18:21 +0530)]
drm/amdgpu/userq: fix access to stale wptr mapping
Use drm_exec to take both locks i.e vm root bo and
wptr_obj bo to access the mapping data properly.
This fixes the security issue of unmap the wptr_obj while
a queue creation is in progress and passing other
bo at same address.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-add max bandwidth budget to QoS interface
-Update tmz field for LSDMA
-fix buffer overruns warnings
-add memory bandwidth override debug interface
-Find link encoder for flexible DIG mapping cases
-Fix type mismatches using guards and explicit casts
-Fix type mismatches in DC and DMUB modules
-Skip HDR metadata update when Smart Power OLED enabled
-Rename backlight_properties to pwr_backlight_properties
-remove watermark range notify
-Clean Up Legacy DML Content
-Implement block sequencing infrastructure for modular hardware operations.
-Do DML float narrowing explicit
-Fix type mismatches in DML and normalize loop bounds
-Remove unused state param from enable_link_analog
-Fix Color Manager (3DLUT, Shaper, Blend)
Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 23 Apr 2026 20:59:01 +0000 (16:59 -0400)]
drm/amd/display: add max bandwidth budget to QoS interface
[Why]
The QoS reporting interface lacked a field to expose the maximum
active memory bandwidth budget. Adding this field allows callers to
observe the effective bandwidth ceiling.
[How]
Rename struct memory_qos to dc_measured_memory_qos and introduce
a new struct dc_requested_memory_qos holding bandwidth lower bound,
calculated average bandwidth, latency upper bounds, and max bandwidth
budget. Add a get_requested_memory_qos function pointer to
clk_mgr_funcs. Update dc_get_qos_info to call through the new
function pointer and populate all requested QoS fields including
qos_max_bw_budget_in_mbps in dc_qos_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 21 Apr 2026 19:04:44 +0000 (15:04 -0400)]
drm/amd/display: Update tmz field for LSDMA
[Why & How]
TMZ field should be 4-bits wide instead of 1.
Also add missing src/dst_cache_policy fields to
tiled copy struct.
Reviewed-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fixes a warning by adding bounds checks and index validation in dml2_0
sources to address static analysis warnings. Ensures safe array access and
prevents out-of-bounds reads by validating indices before use, improving
robustness and reliability in the affected files.
Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add override_memory_bandwidth_request to clk_mgr_funcs and get_utm_qos_model callback
to soc_and_ip_translator_funcs for future test use.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Find link encoder for flexible DIG mapping cases
[why & how]
link->link_enc can only be used to identify the link's link encoder
when the link is not permitted to use flexible link encoder
assignments.
Use the correct function for identifying link encoder and add
function pointer guards before calling them.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix type mismatches using guards and explicit casts
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned iterator and temporary variable types with the semantic type
of the compared bounds. Used unsigned indices for loops bounded by unsigned
counters and table sizes, while retaining signed types where values are
semantically signed or participate in arithmetic that may legitimately go
negative. Where mixed signed/unsigned comparisons are intentional, applied
explicit boundary casts or guarded comparisons instead of broad type
changes.
No functional behavior changes are intended; this is a warning-resolution
and type-alignment cleanup.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix type mismatches in DC and DMUB modules
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned loop/index and bound types in the affected modules and DMUB
sources, including color, freesync, power, stats, and vmid paths.
Used unsigned iterators where bounds/counters are unsigned, preserved
signed types where negative values are meaningful, and updated related
format specifiers where type changes required it. Changes are limited to
warning resolution and type alignment.
No functional behavior change is intended.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ian Chen [Wed, 15 Apr 2026 03:25:22 +0000 (11:25 +0800)]
drm/amd/display: Skip HDR metadata update when Smart Power OLED enabled
[Why & How]
While smart power oled is enabled,
the infopacket contents are tied to the frame histogram,
so it does not need driver side to update the hdr metadata.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ray Wu [Mon, 20 Apr 2026 07:16:12 +0000 (15:16 +0800)]
drm/amd/display: Rename backlight_properties to pwr_backlight_properties
[Why]
'struct backlight_properties' in power.c has the same name as the kernel's
struct defined in <linux/backlight.h>. In out-of-tree backport build
environments, the header is forcefully injected via command-line includes,
causing a redefinition error.
[How]
Rename the file-local 'struct backlight_properties' to
'pwr_backlight_properties' to avoid the name collision. No functional
change.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 21 Apr 2026 00:30:55 +0000 (20:30 -0400)]
drm/amd/display: remove watermark range notify
[Why & How]
dcn42 only use one set of watermark A,
driver always update set A runtime.
no need to notify pmfw the clock range.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zheng, Austin [Fri, 20 Feb 2026 22:41:28 +0000 (17:41 -0500)]
drm/amd/display: Clean Up Legacy DML Content
[Why & How]
Legacy files were used for the transition period between DML1 and DML2.
Fully transitioned away from DML1 so these legacy files can be removed
since they are not actively being used.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zheng Austin <Austin.Zheng@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Implement block sequencing infrastructure for modular hardware operations.
[why]
Hardware sequencer operations need better modularity and testability.
Current monolithic functions make it difficult to unit test individual
operations and create maintainable workflows.
[how]
Implement new hwss_add_* helper functions with standardized parameter structures.
Add block_sequence_state framework for execution context management.
Create cursor, info frame, DSC, and stream encoder sequence functions with
comprehensive unit test support.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Shared DML wrapper helpers in [dc/dml/dml_inline_defs.h](dc/dml/dml_inline_defs.h)
pass double and int values to float-based dcn_bw_* helpers. Make these
intentional narrowing boundaries explicit to reduce warning noise
without changing behavior.
[How]
Add explicit C-style casts at the float API boundary in the shared DML
inline wrappers used by the DCN DML paths.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix type mismatches in DML and normalize loop bounds
[Why]
Address signed/unsigned comparison warnings across DML paths
to keep builds warning-clean and improve type safety at comparison
boundaries. Most warnings came from signed loop/index temporaries compared
against unsigned counters (for example pipe_count, num_states, and
candidate/state counts), plus a small number of mixed signed/unsigned
clock and geometry checks.
[How]
Aligned iterator and temporary variable types with the semantic type
of the compared bounds. Used unsigned indices for loops bounded by unsigned
counters, and retained signed types where values are semantically signed
(for example plane_count math, timing/micro-schedule arithmetic, and
reverse/sentinel-style iteration). Where mixed signed/unsigned comparisons
are intentional, applied explicit boundary casts instead of broad type
changes (for example dispclk minimum clamp and selected timing/height
comparisons).
As a side effect of converting count parameters such as
NumberOfActivePlanes to unsigned, normalized equivalent loop forms from:
for (i = 0; i <= NumberOfActivePlanes - 1; i++)
into the normalized form:
for (i = 0; i < NumberOfActivePlanes; i++)
to keep bound style coherent and avoid avoidable mismatch patterns.
No functional behavior changes are intended; this is a warning-resolution
and type-alignment cleanup.
Assisted-by: Copilot Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Thu, 16 Apr 2026 18:47:13 +0000 (12:47 -0600)]
drm/amd/display: Remove unused state param from enable_link_analog
[WHY & HOW]
The 'state' parameter in enable_link_analog() is never used
within the function body. Remove it from the function.
Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 19 Mar 2026 15:57:08 +0000 (11:57 -0400)]
drm/amd/display: Fix Color Manager (3DLUT, Shaper, Blend)
[WHY & HOW]
The original refactor and fixes are causing regressions.
Revert them for now until they can be resolved
Fixes: e56e3cff2a1b ("drm/amd/display: Sync dcn42 with DC 3.2.373") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Thu, 30 Apr 2026 15:17:21 +0000 (11:17 -0400)]
drm/amdkfd: remove obsolete codes for kfd_mmap
kfd_reserved_mem_mmap is only for mapping CWSR on APU in IOMMUv2
mode, which is no longer supported, and qpd->cwsr_base has been
set before calling kfd_process_init_cwsr_apu, which is the only
caller for KFD_MMAP_TYPE_RESERVED_MEM, so kfd_process_init_cwsr_apu
is not functional anymore, remove them together. On the other hand,
it will fix a vulnerability issue to abuse KFD_MMAP_TYPE_RESERVED_MEM
of kfd_mmap from userspace.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Find the default size required and use the helper funcction to set gart size.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper to make any adjustments to gart size based on other
parameters or conditions.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdkfd: Check if there are kfd porcesses using adev by kfd_processes_count
During gpu hot-unplug need check if there are kfd porcesses still using the
being removed gpu before clean resources of the device. Current driver checks
if kfd_processes_table is empty. kfd processes are not terminated after
removed from kfd_processes_table immediately. They are still alive and may
access the device until kfd_process_wq work queue got ran.
Check kfd->kfd_processes_count value that is updated after kfd process got
uninitialized when its ref becomes zero.
Fixes: 6cca686dfce7 ("drm/amdkfd: kfd driver supports hot unplug/replug amdgpu devices") Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 27 Apr 2026 13:30:23 +0000 (09:30 -0400)]
drm/amdgpu: zero-initialize GART table on allocation
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John B. Moore [Mon, 27 Apr 2026 21:06:28 +0000 (16:06 -0500)]
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
Fixes: 2130f89ced2c ("drm/amdgpu: add SDMA v4.0 implementation (v2)") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: John B. Moore <jbmoore61@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 27 Apr 2026 15:40:25 +0000 (11:40 -0400)]
drm/radeon: add missing revision check for CI
The memory level workarounds only apply to revision 0 SKUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816 Fixes: 127e056e2a82 ("drm/radeon: fix mclk vddc configuration for cards for hawaii") Fixes: 21b8a369046f ("drm/radeon: fix dram timing for certain hawaii boards") Fixes: 90b2fee35cb9 ("drm/radeon: fix dpm mc init for certain hawaii boards") Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 28 Apr 2026 14:42:49 +0000 (10:42 -0400)]
drm/amdgpu/pm: align Hawaii mclk workaround with radeon
Align the hawaii mclk workaround with radeon and windows.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816 Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 27 Apr 2026 15:38:58 +0000 (11:38 -0400)]
drm/amdgpu/pm: add missing revision check for CI
The ci_populate_all_memory_levels() workaround only
applies to revision 0 SKUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816 Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John B. Moore [Tue, 28 Apr 2026 16:35:12 +0000 (11:35 -0500)]
drm/amdgpu/gfx9: drop unnecessary 64-bit fence flag check in KIQ
Remove the BUG_ON(flags & AMDGPU_FENCE_FLAG_64BIT) assertion from
gfx_v9_0_ring_emit_fence_kiq(). The KIQ hardware supports 64-bit
fence writes; the 32-bit writeback address constraint is an
upper-layer convention, not a hardware limitation. The check serves
no purpose and should not be present.
Found by code inspection while investigating related BUG_ON
assertions in the GFX and compute ring emission paths.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: John B. Moore <jbmoore61@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leonardo Cesar [Tue, 28 Apr 2026 23:19:44 +0000 (20:19 -0300)]
drm/amdgpu: deduplicate ring preempt ib function
The ring preemption function is identical for both gfx_v11_0 and
gfx_v12_0. This patch refactors the code by moving the core logic
into a generic function inside amdgpu_gfx.c to reduce code
duplication and simplify future maintenance.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Leonardo Cesar <leonardocesar@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Mon, 20 Apr 2026 15:55:57 +0000 (11:55 -0400)]
drm/amdkfd: Make all TLB-flushes heavy-weight
With only one sequence number we cannot track the need for legacy vs
heavy-weight flushes reliably. Always use heavy-weight.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Randy Dunlap [Mon, 27 Apr 2026 18:38:53 +0000 (11:38 -0700)]
drm/amdgpu: amdgpu{_reset}.h: fix all kernel-doc warnings
Fix all kernel-doc warnings in amdgpu.h and amdgpu_reset.h:
- Use the struct keyword for kernel-doc struct comments.
- Use the correct enum names in enum amd_reset_method.
This eliminates these warnings:
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:477 cannot understand
function prototype: 'struct amdgpu_wb'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_LEGACY' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_MODE0' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_MODE1' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_MODE2' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_LINK' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_BACO' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_PCI' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Enum value
'AMD_RESET_METHOD_ON_INIT' not described in enum 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_LEGACY' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_MODE0' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_MODE1' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_MODE2' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_LINK' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_BACO' description in 'amd_reset_method'
Warning: drivers/gpu/drm/amd/amdgpu/amdgpu.h:576 Excess enum value
'@AMD_RESET_PCI' description in 'amd_reset_method'
Also move the enum to amdgpu_reset.h and eventually only forward declare
it in amdgpu.h. (Christian)
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Randy Dunlap [Mon, 27 Apr 2026 21:41:21 +0000 (14:41 -0700)]
drm/amd/display: dmub_cmd.h: add missing kernel-doc for enums
For enums that have a kernel-doc ("/**") comment block, add or correct
their kernel-doc to eliminate all kernel-doc enum warnings.
Some of these needed "struct" changed to "enum" in the kernel-doc header.
For a few of them, I changed the "/**" comment to a plain "/*"
comment since there was no kernel-doc content there.
Example:
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_NONE' not described in enum 'dmub_fams2_allow_delay_check_mode'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_FROM_START' not described in enum 'dmub_fams2_allow_delay_check_mode'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2673 Enum value 'FAMS2_ALLOW_DELAY_CHECK_FROM_PREPARE' not described in enum 'dmub_fams2_allow_delay_check_mode'
All .o files are the same with or without this patch.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Randy Dunlap [Mon, 27 Apr 2026 21:41:20 +0000 (14:41 -0700)]
drm/amd/display: dmub_cmd.h: correct all kernel-doc prototype warnings
Correct all typedef, struct, and union prototype warnings in
dmub_cmd.h by using the matching names or "typedef" keyword:
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:961 cannot understand function prototype: 'typedef uint32_t dmub_trace_code_t;'
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1183 expecting prototype for union dmub_shared_state_ips_fw. Prototype was for union dmub_shared_state_ips_fw_signals instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1203 expecting prototype for union dmub_shared_state_ips_signals. Prototype was for union dmub_shared_state_ips_driver_signals instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1253 expecting prototype for struct dmub_shared_state_cursor_offload_v1. Prototype was for struct dmub_shared_state_cursor_offload_stream_v1 instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1269 struct dmub_shared
_state_feature_common { uint32_t padding[62]; };: error: Cannot parse enum!
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:1278 struct dmub_shared
_state_feature_header { uint16_t id; uint16_t version; uint32_t reserved; };:
error: Cannot parse enum!
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2001 expecting prototype for struct dmub_cmd_read_modify_write_sequence. Prototype was for struct dmub_rb_cmd_read_modify_write instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2191 expecting prototype for struct dmub_rb_cmd_cab. Prototype was for struct dmub_rb_cmd_cab_for_ss instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:2875 expecting prototype for struct dmub_cmd_set_pixel_clock_data. Prototype was for struct dmub_rb_cmd_set_pixel_clock instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:3398 expecting prototype for union dpia_notify_data_type. Prototype was for union dpia_notification_data instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:3447 expecting prototype for struct dmub_rb_cmd_hpd_sense_notify. Prototype was for struct dmub_rb_cmd_hpd_sense_notify_data instead
Warning: drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h:6267 expecting prototype for struct dmub_cmd_cable_id_input. Prototype was for struct dmub_cmd_cable_id_output instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Julian Braha [Sat, 2 May 2026 19:19:32 +0000 (20:19 +0100)]
drm/i915: replace select with dependency for visible DEBUG_OBJECTS
DRM_I915_SW_FENCE_DEBUG_OBJECTS currently selects DEBUG_OBJECTS even though
DEBUG_OBJECTS is visible to users. Other config options use 'depends on'
for DEBUG_OBJECTS, so let's do the same here.
This select-visible Kconfig misusage was detected by Kconfirm, a static
analysis tool for Kconfig.
The function drm_of_get_data_lanes_count_remote() returns negative error
codes and dsi->lanes is an unsigned integer, so the check (dsi->lanes <
0) is always impossible.
Detected by Smatch:
drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c:2959 jadard_dsi_probe()
warn: unsigned 'dsi->lanes' is never less than zero.
Fixes: eb019688f2a97 ("drm/panel: jadard-jd9365da-h3: support variable DSI configuration") Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260429024954.697411-1-ethantidmore06@gmail.com
Chen Ni [Wed, 29 Apr 2026 08:05:27 +0000 (16:05 +0800)]
drm/panel: focaltech-ota7290b: Fix error check for devm_drm_panel_alloc()
The devm_drm_panel_alloc() function returns an error pointer on failure,
not NULL. Fix the check to use IS_ERR() and return PTR_ERR() to
correctly handle allocation failures.
Fixes: 07853e954248 ("drm/panel: add driver for Waveshare 8.8" DSI TOUCH-A panel") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260429080527.1456732-1-nichen@iscas.ac.cn
drm/i915: remove HAS_PCH_NOP() dependency from clock gating
intel_pch_init_clock_gating() already handles unsupported PCH types,
including PCH_NOP, by doing nothing.
Drop the explicit HAS_PCH_NOP() check from the IVB clock gating
path and always call the display helper directly. This removes one
more direct dependency on display-side PCH macros from
intel_clock_gating.c.
drm/i915/display: move HSW and BDW clock gating init to display
Move the HSW and BDW display clock gating programming into the display
code. In this case we need two different helpers, because the common
code between these two is split in the middle.
drm/i915/display: move GLK clock gating init to display
Move the GLK-specific display clock gating programming into display
intel_display_clock_gating.c, to remove more dependencies from i915 to
display registers.
Now that all remaining Gen9-family callers moved into display, we can
move the shared Gen9 display clock gating helper into display and
remove the old local helper from intel_clock_gating.c.
Additionally, the SKL_DE_COMPRESSED_HASH_MODE programming was
protected by HAS_LLC(), but that's incidental, because in Gen9
platforms, only SKL and KBL, for which this workaround applies, have
LLC(). In order not to use HAS_LLC() in display code, we can simply
remove this check from the generic Gen9 function and move the
SKL_DE_COMPRESSED_HASH_MODE programming to the KBL and SKL specific
functions. And, intentionally or not, CFL and CML were also using
this workaround, because they also have LLC, even though the comments
were only mentioning SKL and KBL. In order not to change anything
functionally with this patch, the workaround was also added to
intel_display_cfl_init_clock_gating().
drm/i915/display: move CFL clock gating init to display
Move the CFL/CML-specific display clock gating programming into
display intel_display_clock_gating.c, to remove more dependencies from
i915 to display registers.
projects / linux / log