Zygo Blaxell [Wed, 13 Jan 2021 03:31:22 +0000 (22:31 -0500)]
btrfs: do not allow data to be allocated on the wrong device type
If any device is marked preferred_metadata, then:
- permit metadata chunk allocations only on preferred devices,
to avoid losing the performance gain of the preferred devices.
- permit data chunk allocations only on non-preferred devices,
to avoid polluting the preferred devices with data, and starving
the filesystem of metadata space.
If no device is marked preferred_metadata, then allocate any data or
metadata chunk on any device with available space.
btrfs: add preferred_metadata mode (with last btrfs_find_device argument, without mount option)
When this mode is enabled, the allocation policy of the chunk
is so modified:
- allocation of metadata chunk: priority is given to preferred_metadata
disks.
- allocation of data chunk: priority is given to a non preferred_metadata
disk.
When a striped profile is involved (like RAID0,5,6), the logic
is a bit more complex. If there are enough disks, the data profiles
are stored on the non preferred_metadata disks; instead the metadata
profiles are stored on the preferred_metadata disk.
If the disks are not enough, then the profile is allocated on all
the disks.
Example: assuming that sda, sdb, sdc are ssd disks, and sde, sdf are
non preferred_metadata ones.
A data profile raid6, will be stored on sda, sdb, sdc, sde, sdf (sde
and sdf are not enough to host a raid5 profile).
A metadata profile raid6, will be stored on sda, sdb, sdc (these
are enough to host a raid6 profile).
To enable this mode pass -o dedicated_metadata at mount time.
The MBA software controller (mba_sc) is a feedback loop which
periodically reads MBM counters and tries to restrict the bandwidth
below a user-specified value. It tags along the MBM counter overflow
handler to do the updates with 1s interval in mbm_update() and
update_mba_bw().
The purpose of mbm_update() is to periodically read the MBM counters to
make sure that the hardware counter doesn't wrap around more than once
between user samplings. mbm_update() calls __mon_event_count() for local
bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count()
instead when mba_sc is enabled. __mon_event_count() will not be called
for local bandwidth updating in MBM counter overflow handler, but it is
still called when reading MBM local bandwidth counter file
'mbm_local_bytes', the call path is as below:
In __mon_event_count(), m->chunks is updated by delta chunks which is
calculated from previous MSR value (m->prev_msr) and current MSR value.
When mba_sc is enabled, m->chunks is also updated in mbm_update() by
mistake by the delta chunks which is calculated from m->prev_bw_msr
instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in
the mba_sc feedback loop.
When reading MBM local bandwidth counter file, m->chunks was changed
unexpectedly by mbm_bw_count(). As a result, the incorrect local
bandwidth counter which calculated from incorrect m->chunks is shown to
the user.
Fix this by removing incorrect m->chunks updating in mbm_bw_count() in
MBM counter overflow handler, and always calling __mon_event_count() in
mbm_update() to make sure that the hardware local bandwidth counter
doesn't wrap around.
Test steps:
# Run workload with aggressive memory bandwidth (e.g., 10 GB/s)
git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat
&& make
./tools/membw/membw -c 0 -b 10000 --read
# Enable MBA software controller
mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl
# Create control group c1
mkdir /sys/fs/resctrl/c1
# Set MB throttle to 6 GB/s
echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata
# Write PID of the workload to tasks file
echo `pidof membw` > /sys/fs/resctrl/c1/tasks
# Read local bytes counters twice with 1s interval, the calculated
# local bandwidth is not as expected (approaching to 6 GB/s):
local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
sleep 1
local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
echo "local b/w (bytes/s):" `expr $local_2 - $local_1`
membarrier() does not explicitly sync_core() remote CPUs; instead, it
relies on the assumption that an IPI will result in a core sync. On x86,
this may be true in practice, but it's not architecturally reliable. In
particular, the SDM and APM do not appear to guarantee that interrupt
delivery is serializing. While IRET does serialize, IPI return can
schedule, thereby switching to another task in the same mm that was
sleeping in a syscall. The new task could then SYSRET back to usermode
without ever executing IRET.
Make this more robust by explicitly calling sync_core_before_usermode()
on remote cores. (This also helps people who search the kernel tree for
instances of sync_core() and sync_core_before_usermode() -- one might be
surprised that the core membarrier code doesn't currently show up in a
such a search.)
Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/776b448d5f7bd6b12690707f5ed67bcda7f1d427.1607058304.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling")
cleaned up the computation of MMIO generation SPTE masks, however it
introduced a bug how the upper part was encoded:
SPTE bits 52-61 were supposed to contain bits 10-19 of the current
generation number, however a missing shift encoded bits 1-10 there instead
(mostly duplicating the lower part of the encoded generation number that
then consisted of bits 1-9).
In the meantime, the upper part was shrunk by one bit and moved by
subsequent commits to become an upper half of the encoded generation number
(bits 9-17 of bits 0-17 encoded in a SPTE).
In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation")
has changed the SPTE bit range assigned to encode the generation number and
the total number of bits encoded but did not update them in the comment
attached to their defines, nor in the KVM MMU doc.
Let's do it here, too, since it is too trivial thing to warrant a separate
commit.
Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org
[Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed that once per 300-1300 port openings the first
transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared
as "e" on the wire). It only happened if single byte has been transmitted
right after port open, which means, DMA is not used for this transfer and
the corruption never happened afterwards.
Therefore I've carefully re-read the MDR1 errata (link below), which says
"when accessing the MDR1 registers that causes a dummy under-run condition
that will freeze the UART in IrDA transmission. In UART mode, this may
corrupt the transferred data". Strictly speaking,
omap_8250_mdr1_errataset() performs a read access and if the value is the
same as should be written, exits without errata-recommended FIFO reset.
A brief check of the serial_omap_mdr1_errataset() from the competing
omap-serial driver showed it has no read access of MDR1. After removing the
read access from omap_8250_mdr1_errataset() the data corruption never
happened any more.
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.
Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.
The console part of sisusbvga is broken vs. printk(). It uses in_atomic()
to detect contexts in which it cannot sleep despite the big fat comment in
preempt.h which says: Do not use in_atomic() in driver code.
in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which
means that spin/rw_lock held regions are not detected by it.
There is no way to make this work by handing context information through to
the driver and this only can be solved once the core printk infrastructure
supports sleepable console drivers.
UAS does not share the pessimistic assumption storage is making that
devices cannot deal with WRITE_SAME. A few devices supported by UAS,
are reported to not deal well with WRITE_SAME. Those need a quirk.
Add it to the device that needs it.
Reported-by: David C. Partridge <david.partridge@perdrix.co.uk> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As
Titan Ridge this one also includes xHCI host controller. In order to
safe energy we should put it to low power state by default when idle.
For this reason allow host runtime PM for Maple Ridge.
The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt
controller awake if the host controller is not allowed to sleep.
This is the case even if no USB devices are connected to the host.
Add the Intel Alpine Ridge LP product-id to the list of product-ids
for which we allow runtime PM by default.
Fixes: 2815ef7fe4d4 ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") Cc: <stable@vger.kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a USB2 device wakeup is not enabled/supported the link state may
still be in U0 in xhci_bus_suspend(), where it's then manually put
to suspended U3 state.
Just as with selective suspend the device needs time to enter U3
suspend before continuing with further suspend operations
(e.g. system suspend), otherwise we may enter system suspend with link
state in U0.
The current channel-map control implementation in USB-audio driver may
lead to an error message like
"control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().
The logic for truncating the log file for emailing based on the
MAIL_MAX_SIZE option is confusing and incorrect. Simplify it and have the
tail of the log file truncated to the max size specified in the config.
Cc: stable@vger.kernel.org Fixes: 855d8abd2e8ff ("ktest.pl: Change the logic to control the size of the log file emailed") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the size of the error log is too big to send via email, and the sending
fails, it wont email any result. This can be confusing for the user who is
waiting for an email on the completion of the tests.
If it fails to send email, then try again without the log file stating that
it failed to send an email. Obviously this will not be of use if the sending
of email failed for some other reasons, but it will at least give the user
some information when it fails for the most common reason.
Cc: stable@vger.kernel.org Fixes: c2d84ddb338c8 ("ktest.pl: Add MAIL_COMMAND option to define how to send email") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`tipc_node_apply_property` does a null check on a `tipc_link_entry`
pointer but also accesses the same pointer out of the null check block.
This triggers a warning on Coverity Static Analyzer because we're
implying that `e->link` can BE null.
Move "Update MTU for node link entry" line into if block to make sure
that we're not in a state that `e->link` is null.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previous versions can be found at:
v1:
initial version
https://lkml.org/lkml/2020/10/28/921
v2:
do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip
the call of phy_ethtool_set_wol() instead.
https://lkml.org/lkml/2020/10/31/380
v3:
in function lan743x_ethtool_set_wol:
use ternary operator instead of if-else sentence (review by Markus Elfring)
return -ENETDOWN insted of -EIO (review by Andrew Lunn)
When CONFIG_IPV6 is disabled, clang complains that a variable
is uninitialized for non-IPv4 data:
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1046:6: error: variable 'cntrl1' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (tx_info->ip_family == AF_INET) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1059:2: note: uninitialized use occurs here
cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) |
^~~~~~
Replace the preprocessor conditional with the corresponding C version,
and make the ipv4 case unconditional in this configuration to improve
readability and avoid the warning.
Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.
Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:
esp-hw-offload: off [requested on]
I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.
Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Reported-by: Ivan Vecera <ivecera@redhat.com> Suggested-by: Ivan Vecera <ivecera@redhat.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 61aec25a6db5 ("cls_flower: Support filtering on multiple MPLS Label Stack Entries") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case error CQE was found while polling TX CQ, the QP is in error
state and all posted WQEs will generate error CQEs without any data
transmitted. Fix it by reopening the channels, via same method used for
TX timeout handling.
In addition add some more info on error CQE and WQE for debug.
Fixes: bd2f631d7c60 ("net/mlx4_en: Notify user when TX ring in error state") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add restarting state flag to avoid scheduling another restart task while
such task is already running. Change task name from watchdog_task to
restart_task to better fit the task role.
Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The offending commit introduces a cleanup callback that is invoked
when the driver module is removed to clean up the tunnel device
flow block. But it returns on the first iteration of the for loop.
The remaining indirect flow blocks will never be freed.
Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When cwnd is not a multiple of the TSO skb size of N*MSS, we can get
into persistent scenarios where we have the following sequence:
(1) ACK for full-sized skb of N*MSS arrives
-> tcp_write_xmit() transmit full-sized skb with N*MSS
-> move pacing release time forward
-> exit tcp_write_xmit() because pacing time is in the future
(2) TSQ callback or TCP internal pacing timer fires
-> try to transmit next skb, but TSO deferral finds remainder of
available cwnd is not big enough to trigger an immediate send
now, so we defer sending until the next ACK.
(3) repeat...
So we can get into a case where we never mark ourselves as
cwnd-limited for many seconds at a time, even with
bulk/infinite-backlog senders, because:
o In case (1) above, every time in tcp_write_xmit() we have enough
cwnd to send a full-sized skb, we are not fully using the cwnd
(because cwnd is not a multiple of the TSO skb size). So every time we
send data, we are not cwnd limited, and so in the cwnd-limited
tracking code in tcp_cwnd_validate() we mark ourselves as not
cwnd-limited.
o In case (2) above, every time in tcp_write_xmit() that we try to
transmit the "remainder" of the cwnd but defer, we set the local
variable is_cwnd_limited to true, but we do not send any packets, so
sent_pkts is zero, so we don't call the cwnd-limited logic to update
tp->is_cwnd_limited.
Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Reported-by: Ingemar Johansson <ingemar.s.johansson@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot reported a stack overflow in bitmap_from_arr32() called from
ethnl_parse_bitset() when bitset from netlink message is longer than
target bitmap length. While ethnl_compact_sanity_checks() makes sure that
trailing part is all zeros (i.e. the request does not try to touch bits
kernel does not recognize), we also need to cap change_bits to nbits so
that we don't try to write past the prepared bitmaps.
Before commit a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
small tcp_rmem[1] values were overridden by tcp_fixup_rcvbuf() to accommodate various MSS.
This is no longer the case, and Hazem Mohamed Abuelfotoh reported
that DRS would not work for MTU 9000 endpoints receiving regular (1500 bytes) frames.
Root cause is that tcp_init_buffer_space() uses tp->rcv_wnd for upper limit
of rcvq_space.space computation, while it can select later a smaller
value for tp->rcv_ssthresh and tp->window_clamp.
Based on an initial report and patch from Hazem Mohamed Abuelfotoh
https://lore.kernel.org/netdev/20201204180622.14285-1-abuehaze@amazon.com/
Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Fixes: 041a14d26715 ("tcp: start receiver buffer autotuning sooner") Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform_get_resource() may fail and in this case a NULL dereference
will occur.
Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current IP register MAC_HW_Feature1[ADDR64] only defines
32/40/64 bit width, but some SOCs support others like i.MX8MP
support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64].
So overwrite dma_cap.addr64 according to HW real design.
Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When do suspend/resume test, there have WARN_ON() log dump from
stmmac_xmit() funciton, the code logic:
entry = tx_q->cur_tx;
first_entry = entry;
WARN_ON(tx_q->tx_skbuff[first_entry]);
In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because
the skb should be handled and freed in stmmac_tx_clean().
But stmmac_resume() reset queue parameters like below, skb buffers
may not be freed.
tx_q->cur_tx = 0;
tx_q->dirty_tx = 0;
So free tx skb buffer in stmmac_resume() to avoid warning and
memory leak.
Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.
Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.
While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.
Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]#
This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL,
so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'.
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.
The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.
The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.
Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
ip link set dev bridge type bridge mcast_snooping 1 < deadlock >
Noticed some inconsistencies in packet statistics reporting.
This patch adds the missing Tx packet counter registers to
ethtool reporting and fixes the information strings for a
few of them.
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the
proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu().
Otherwize, with a negtive value passed, it will underflow inet_protos.
This can be reproduced with IPIP FOU:
# ip fou add port 5555 ipproto 4
# ethtool -K eth1 rx-gro-list on
Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") Reported-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hclge_dbg_reg_info[] is defined as an array of packed structure
accidentally. However, this array contains pointers, which are
no longer aligned naturally, and cannot be relocated on PPC64.
Hence, when compile-testing this driver on PPC64 with
CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), there will be
some warnings.
Since each field in structure hclge_qos_pri_map_cmd and
hclge_dbg_bitmap_cmd is type u8, the pragma packed is unnecessary
for these two structures as well, so remove the pragma packed in
hclge_debugfs.h to fix this issue, and this increases
hclge_dbg_reg_info[] by 4 bytes per entry.
Fixes: a582b78dfc33 ("net: hns3: code optimization for debugfs related to "dump reg"") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.
So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.
The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.
And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
MC6_DATA = 61,
MC6_CTRL = 61,
MC4_DATA = 60,
MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.
Reported-by: Eldar Gasanov <eldargasanov2@gmail.com> Reported-by: Maxim Kochetkov <fido_max@inbox.ru> Tested-by: Eldar Gasanov <eldargasanov2@gmail.com> Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 3c7b51bd39b2 ("net: dsa: felix: allow flooding for all traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Depending on the order of the routes to fe80::/64 are installed on the
VRF table, the NS for the source link-local address of the originator
might be sent to the wrong interface.
This patch ensures that packets with link-local addr source is doing a
lookup with the orig_iif when the destination addr indicates that it
is strict.
Add the reproducer as a use case in self test script fcnal-test.sh.
Fixes: b4869aa2f881 ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the coherent memory is freed in gsi_trans_pool_exit_dma(), we
are mistakenly passing the size of a single element in the pool
rather than the actual allocated size. Fix this bug.
83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows
as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the
timer is not yet initialized, it's possible to observe a splat like this:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x99/0xcb
register_lock_class+0x12dd/0x1750
__lock_acquire+0xfe/0x3970
lock_acquire+0x1c8/0x7f0
del_timer_sync+0x49/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210
[...]
Call Trace:
debug_object_assert_init+0x268/0x380
try_to_del_timer_sync+0x6a/0x100
del_timer_sync+0x9e/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
fix it moving timer_setup() before any failure, like it was done on 'red'
with former commit 608b4adab178 ("net_sched: initialize timer earlier in
red_init()").
ptrace_get_syscall_info() is potentially copying uninitialized stack
memory to userspace, since the compiler may leave a 3-byte hole near the
beginning of `info`. Fix it by adding a padding field to `struct
ptrace_syscall_info`.
Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200801152044.230416-1-yepeilin.cs@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h
mutually exclusive") neglected to copy barrier_data() from
compiler-gcc.h into compiler-clang.h.
The definition in compiler-gcc.h was really to work around clang's more
aggressive optimization, so this broke barrier_data() on clang, and
consequently memzero_explicit() as well.
For example, this results in at least the memzero_explicit() call in
lib/crypto/sha256.c:sha256_transform() being optimized away by clang.
Fix this by moving the definition of barrier_data() into compiler.h.
Also move the gcc/clang definition of barrier() into compiler.h,
__memory_barrier() is icc-specific (and barrier() is already defined
using it in compiler-intel.h) and doesn't belong in compiler.h.
[rdunlap@infradead.org: fix ALPHA builds when SMP is not enabled]
Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.
Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.
[ bp: Massage commit message. ]
Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") Reported-by: Adam Zabrocki <pi3@pi3.com.pl> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prarit reported that depending on the affinity setting the
' irq $N: Affinity broken due to vector space exhaustion.'
message is showing up in dmesg, but the vector space on the CPUs in the
affinity mask is definitely not exhausted.
Shung-Hsi provided traces and analysis which pinpoints the problem:
The ordering of trying to assign an interrupt vector in
assign_irq_vector_any_locked() is simply wrong if the interrupt data has a
valid node assigned. It does:
1) Try the intersection of affinity mask and node mask
2) Try the node mask
3) Try the full affinity mask
4) Try the full online mask
Obviously #2 and #3 are in the wrong order as the requested affinity
mask has to take precedence.
In the observed cases #1 failed because the affinity mask did not contain
CPUs from node 0. That made it allocate a vector from node 0, thereby
breaking affinity and emitting the misleading message.
Revert the order of #2 and #3 so the full affinity mask without the node
intersection is tried before actually affinity is broken.
If no node is assigned then only the full affinity mask and if that fails
the full online mask is tried.
sync_core_before_usermode() had an incorrect optimization. If the kernel
returns from an interrupt, it can get to usermode without IRET. It just has
to schedule to a different task in the same mm and do SYSRET. Fortunately,
there were no callers of sync_core_before_usermode() that could have had
in_irq() or in_nmi() equal to true, because it's only ever called from the
scheduler.
While at it, clarify a related comment.
Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5afc7632be1422f91eaf7611aaaa1b5b8580a086.1607058304.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PAT bit is in different locations for 4k and 2M/1G page table
entries.
Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three
caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages,
and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT
index for write-protected pages.
Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
My patch caused kernel Oopses and delays in boot. Revert it.
The problem was that I moved the "mem->dma = paddr;" before the call to
be_fill_queue(). But the first thing that the be_fill_queue() function
does is memset the whole struct to zero which overwrites the assignment.
Link: https://lore.kernel.org/r/X8jXkt6eThjyVP1v@mwanda Fixes: 38b2db564d9a ("scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()") Cc: stable <stable@vger.kernel.org> Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In zonefs_file_dio_append(), the pages obtained using
bio_iov_iter_get_pages() are not released on completion of the
REQ_OP_APPEND BIO, nor when bio_iov_iter_get_pages() fails.
Furthermore, a call to bio_put() is missing when
bio_iov_iter_get_pages() fails.
Fix these resource leaks by adding BIO resource release code (bio_put()i
and bio_release_pages()) at the end of the function after the BIO
execution and add a jump to this resource cleanup code in case of
bio_iov_iter_get_pages() failure.
While at it, also fix the call to task_io_account_write() to be passed
the correct BIO size instead of bio_iov_iter_get_pages() return value.
Reported-by: Christoph Hellwig <hch@lst.de> Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1378a5ee451a ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping. The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:
BUG: Bad page state in process bash pfn:380001
page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
aops:0x0
flags: 0x3ffff00000000000()
raw: 3ffff00000000000000000000000010000000000000001220000000100000000
raw: 00000000000000000000000000000000ffffffff000000000000000000000000
page dumped because: non-NULL mapping
Modules linked in:
CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
show_stack+0x6e/0xe8
dump_stack+0x90/0xc8
bad_page+0xd6/0x130
free_pcppages_bulk+0x26a/0x800
free_unref_page+0x6e/0x90
free_contig_range+0x94/0xe8
update_and_free_page+0x1c4/0x2c8
free_pool_huge_page+0x11e/0x138
set_max_huge_pages+0x228/0x300
nr_hugepages_store_common+0xb8/0x130
kernfs_fop_write+0xd2/0x218
vfs_write+0xb0/0x2b8
ksys_write+0xac/0xe0
system_call+0xe6/0x288
Disabling lock debugging due to kernel taint
This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).
Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).
Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com Fixes: 1378a5ee451a ("mm: store compound_nr as well as compound_order") Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we try to visit the pagemap of a tagged userspace pointer, we find
that the start_vaddr is not correct because of the tag.
To fix it, we should untag the userspace pointers in pagemap_read().
I tested with 5.10-rc4 and the issue remains.
Explanation from Catalin in [1]:
"Arguably, that's a user-space bug since tagged file offsets were never
supported. In this case it's not even a tag at bit 56 as per the arm64
tagged address ABI but rather down to bit 47. You could say that the
problem is caused by the C library (malloc()) or whoever created the
tagged vaddr and passed it to this function. It's not a kernel
regression as we've never supported it.
Now, pagemap is a special case where the offset is usually not
generated as a classic file offset but rather derived by shifting a
user virtual address. I guess we can make a concession for pagemap
(only) and allow such offset with the tag at bit (56 - PAGE_SHIFT + 3)"
My test code is based on [2]:
A userspace pointer which has been tagged by 0xb4: 0xb400007662f541c8
userspace program:
uint64 OsLayer::VirtualToPhysical(void *vaddr) {
uint64 frame, paddr, pfnmask, pagemask;
int pagesize = sysconf(_SC_PAGESIZE);
off64_t off = ((uintptr_t)vaddr) / pagesize * 8; // off = 0xb400007662f541c8 / pagesize * 8 = 0x5a00003b317aa0
int fd = open(kPagemapPath, O_RDONLY);
...
if (lseek64(fd, off, SEEK_SET) != off || read(fd, &frame, 8) != 8) {
int err = errno;
string errtxt = ErrorString(err);
if (fd >= 0)
close(fd);
return 0;
}
...
}
/* watch out for wraparound */
// svpfn == 0xb400007662f54
// (mm->task_size >> PAGE) == 0x8000000
if (svpfn > mm->task_size >> PAGE_SHIFT) // the condition is true because of the tag 0xb4
start_vaddr = end_vaddr;
ret = 0;
while (count && (start_vaddr < end_vaddr)) { // we cannot visit correct entry because start_vaddr is set to end_vaddr
int len;
unsigned long end;
...
}
...
}
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
We currently presume that the engine reset is successful, cancelling the
expired preemption timer in the process. However, engine resets can
fail, leaving the timeout still pending and we will then respond to the
timeout again next time the tasklet fires. What we want is for the
failed engine reset to be promoted to a full device reset, which is
kicked by the heartbeat once the engine stops processing events.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-2-chris@chris-wilson.co.uk
(cherry picked from commit d997e240ceecb4f732611985d3a939ad1bfc1893) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before reseting the engine, we suspend the execution of the guilty
request, so that we can continue execution with a new context while we
slowly compress the captured error state for the guilty context. However,
if the reset fails, we will promptly attempt to reset the same request
again, and discover the ongoing capture. Ignore the second attempt to
suspend and capture the same request.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.7+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-1-chris@chris-wilson.co.uk
(cherry picked from commit b969540500bce60cf1cdfff5464388af32b9a553) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the slice count computation algorithm
for calculating the slice count based on Peak pixel rate
and the max slice width allowed on the DSC engines.
We need to ensure slice count > min slice count req
as per DP spec based on peak pixel rate and that it is
greater than min slice count based on the max slice width
advertised by DPCD. So use max of these two.
In the prev patch we were using min of these 2 causing it
to violate the max slice width limitation causing a blank
screen on 8K@60.
Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com
(cherry picked from commit d371d6ea92ad2a47f42bbcaa786ee5f6069c9c14) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the course of discovering and closing many races with context closure
and execbuf submission, since commit 61231f6bd056 ("drm/i915/gem: Check
that the context wasn't closed during setup") we started checking that
the context was not closed by another userspace thread during the execbuf
ioctl. In doing so we cancelled the inflight request (by telling it to be
skipped), but kept reporting success since we do submit a request, albeit
one that doesn't execute. As the error is known before we return from the
ioctl, we can report the error we detect immediately, rather than leave
it on the fence status. With the immediate propagation of the error, it
is easier for userspace to handle.
Fixes: 61231f6bd056 ("drm/i915/gem: Check that the context wasn't closed during setup")
Testcase: igt/gem_ctx_exec/basic-close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.7+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203103432.31526-1-chris@chris-wilson.co.uk
(cherry picked from commit ba38b79eaeaeed29d2383f122d5c711ebf5ed3d1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid a recently added warning:
Bogus possible_crtcs: [ENCODER:65:TMDS-65] possible_crtcs=0xf (full crtc mask=0x7)
WARNING: CPU: 3 PID: 439 at drivers/gpu/drm/drm_mode_config.c:617 drm_mode_config_validate+0x178/0x200 [drm]
In this case the warning is harmless, but confusing to users.
Fixes: 0df108237433 ("drm: Validate encoder->possible_crtcs")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209123 Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CMD13 polling is needed for commands with R1B responses. In commit a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B
response"), the intent was to introduce this for requests targeted to the
RPMB partition. However, the condition to trigger the polling loop became
wrong, leading to unnecessary polling. Let's fix the condition to avoid
this.
Fixes: a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response") Cc: stable@vger.kernel.org Reported-by: Zhan Liu <zliua@micron.com> Signed-off-by: Zhan Liu <zliua@micron.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20201202202320.22165-1-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 16ada730a759 ("mmc: sdhci-of-arasan: Modify clock operations
handling") introduced support for platform specific clock operations.
Around the same point in time the commit 36c6aadaae86 ("mmc:
sdhci-of-arasan: Add support for Intel Keem Bay") was also merged.
Unfortunate it was not really tested on top of the previously mentioned
commit, which causes clock registration failures for Keem Bay SOC devices.
Let's fix this, by properly declaring the clock operation for Keem Bay SOC
devices.
Fixes: 36c6aadaae86 ("mmc: sdhci-of-arasan: Add support for Intel Keem Bay") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201118120120.24908-2-muhammad.husaini.zulkifli@intel.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Debounce filter setting should be independent from IRQ type setting
because according to the ACPI specs, there are separate arguments for
specifying debounce timeout and IRQ type in GpioIo() and GpioInt().
Together with commit 06abe8291bc31839950f7d0362d9979edc88a666
("pinctrl: amd: fix incorrect way to disable debounce filter") and
Andy's patch "gpiolib: acpi: Take into account debounce settings" [1],
this will fix broken touchpads for laptops whose BIOS set the
debounce timeout to a relatively large value. For example, the BIOS
of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000),
Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce
timeout to 124.8ms. This led to the kernel receiving only ~7 HID
reports per second from the Synaptics touchpad
(MSFT0001:00 06CB:7F28).
Existing touchpads like [2][3] are not troubled by this bug because
the debounce timeout has been set to 0 by the BIOS before enabling
the debounce filter in setting IRQ type.
[1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/ 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
[2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582
[3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28
GPIOs that attempt to use interrupts get thwarted with a message like:
"pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because
the HOSTSW_OWN offset is incorrect, so every GPIO looks like it's
owned by ACPI.
Fixes: e278dcb7048b1 ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Cc: stable@vger.kernel.org Signed-off-by: Evan Green <evgreen@chromium.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The touchpad operates in Basic Mode by default in the Acer BIOS
setup, but some Aspire/TravelMate models require the i8042 to be
reset in order to be correctly detected.
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
This issue was first noticed when I was testing different kernels on
Oracle Linux 8 which as Fedora 30+ adopts BLS as default. Even though a
kernel entry was added successfully and the index of that kernel entry was
retrieved correctly, ktest still wouldn't reboot the system into
user-specified kernel.
The bug was spotted in subroutine reboot_to where the if-statement never
checks for REBOOT_TYPE "grub2bls", therefore the desired entry will not be
set for the next boot.
Add a check for "grub2bls" so that $grub_reboot $grub_number can
be run before a reboot if REBOOT_TYPE is "grub2bls" then we can boot to
the correct kernel.
Before we got these errors on MT8192 platform:
[ 59.153891] Restarting tasks ...
[ 59.154540] done.
[ 59.159175] PM: suspend exit
[ 59.218724] mtk-msdc 11f60000.mmc: phase: [map:fffffffe] [maxlen:31]
[final:16]
[ 119.776083] mmc0: cqhci: timeout for tag 9
[ 119.780196] mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
[ 119.786709] mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510
[ 119.793225] mmc0: cqhci: Config: 0x00000101 | Control: 0x00000000
[ 119.799706] mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000000
[ 119.806177] mmc0: cqhci: Int sig: 0x00000000 | Int Coal: 0x00000000
[ 119.812670] mmc0: cqhci: TDL base: 0x00000000 | TDL up32: 0x00000000
[ 119.819149] mmc0: cqhci: Doorbell: 0x003ffc00 | TCN: 0x00000200
[ 119.825656] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[ 119.832155] mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000
[ 119.838627] mmc0: cqhci: SSC2: 0x00000000 | DCMD rsp: 0x00000000
[ 119.845174] mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x0000891c
[ 119.851654] mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000
[ 119.865773] mmc0: cqhci: : ===========================================
[ 119.872358] mmc0: running CQE recovery
From these logs, we found TDL base was back to the default value.
After suspend, the mmc host is powered off by HW, and bring CQE register
to the default value, so we add system suspend/resume interface, then bring
CQE to deactivated state before suspend, it will be enabled by CQE first
request after resume.
Commit 601282d65b96 ("media: pulse8-cec: use adap_free callback") used
the adap_free callback to clean up on disconnect. What I forgot was that
in the probe it will call cec_delete_adapter() followed by kfree(pulse8)
if an error occurs. But by using the adap_free callback,
cec_delete_adapter() is already freeing the pulse8 struct.
This wasn't noticed since normally the probe works fine, but Pulse-Eight
published a new firmware version that caused a probe error, so now it
hits this bug. This affects firmware version 12, but probably any
version >= 10.
Commit aa9eda76129c ("media: pulse8-cec: close serio in disconnect, not
adap_free") made this worse by adding the line 'pulse8->serio = NULL'
right after the call to cec_unregister_adapter in the disconnect()
function. Unfortunately, cec_unregister_adapter will typically call
cec_delete_adapter (unless a filehandle to the cec device is still
open), which frees the pulse8 struct. So now it will also crash on a
simple unplug of the Pulse-Eight device.
With this fix both the unplug issue and a probe() error situation are
handled correctly again.
It will still fail to probe() with a v12 firmware, that's something
to look at separately.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Maxime Ripard <mripard@kernel.org> Tested-by: Maxime Ripard <mripard@kernel.org> Fixes: aa9eda76129c ("media: pulse8-cec: close serio in disconnect, not adap_free") Fixes: 601282d65b96 ("media: pulse8-cec: use adap_free callback") Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.
This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.
A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.
Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.
This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().
Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux / log