From b7c5d0b844dd7da8e64d9356d5c86695803ffb42 Mon Sep 17 00:00:00 2001 From: Frank Becker Date: Tue, 20 Jan 2004 22:26:42 +0000 Subject: [PATCH] [ARM PATCH] 1703/1: SA Cerf update (cleanup) Patch from Frank Becker Crud removal. Updated cerf doc. The SA CerfPDA/CerfPOD have long been gone. I see no community activity. The last official release was 2.4.9. Removed ifdefs for CERF_CPLD (which referred to the PDA/POD), go figure. Removed keyboard driver. Removed default configs for PDA/POD. Removed PDA/POD related LCD stuff. --- Documentation/arm/SA1100/CERF | 22 +- arch/arm/configs/cerfpda_defconfig | 967 ------------------------- arch/arm/configs/cerfpod_defconfig | 894 ----------------------- arch/arm/mach-sa1100/Kconfig | 13 +- arch/arm/mach-sa1100/leds-cerf.c | 12 - drivers/video/Kconfig | 23 - drivers/video/sa1100fb.c | 57 -- include/asm-arm/arch-sa1100/keyboard.h | 5 - 8 files changed, 9 insertions(+), 1984 deletions(-) delete mode 100644 arch/arm/configs/cerfpda_defconfig delete mode 100644 arch/arm/configs/cerfpod_defconfig diff --git a/Documentation/arm/SA1100/CERF b/Documentation/arm/SA1100/CERF index bf50c6fdd5729..b3d845301ef1c 100644 --- a/Documentation/arm/SA1100/CERF +++ b/Documentation/arm/SA1100/CERF @@ -1,3 +1,5 @@ +*** The StrongARM version of the CerfBoard/Cube has been discontinued *** + The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board that measures approximately 2" square. It includes an Ethernet controller, an RS232-compatible serial port, a USB function port, and @@ -5,7 +7,7 @@ one CompactFlash+ slot on the back. Pictures can be found at the Intrinsyc website, http://www.intrinsyc.com. This document describes the support in the Linux kernel for the -Intrinsyc CerfBoard as of version 2.4.0-test4-np1. +Intrinsyc CerfBoard. Supported in this version: - CompactFlash+ slot (select PCMCIA in General Setup and any options @@ -14,24 +16,14 @@ Supported in this version: Network Devices) - Serial ports with a serial console (hardcoded to 38400 8N1) -Not supported in this version (yet): - - LCD driver/touchscreen interface - - UDC (a driver exists right now, but is unstable and slow and only - works with the Linux USB) - In order to get this kernel onto your Cerf, you need a server that runs both BOOTP and TFTP. Detailed instructions should have come with your evaluation kit on how to use the bootloader. This series of commands will suffice: - make cerf_config - make xconfig - make zImage + make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig + make ARCH=arm CROSS_COMPILE=arm-linux- zImage + make ARCH=arm CROSS_COMPILE=arm-linux- modules cp arch/arm/boot/zImage -The default config uses a 4MB RAM disk located at 0xc0500000 as root. -Setting the board to mount root from a NFS partition works, too. - - -I-Gene Leong, Intrinsyc Software Inc. -ileong@intrinsyc.com +support@intrinsyc.com diff --git a/arch/arm/configs/cerfpda_defconfig b/arch/arm/configs/cerfpda_defconfig deleted file mode 100644 index a6803f8eaeb0b..0000000000000 --- a/arch/arm/configs/cerfpda_defconfig +++ /dev/null @@ -1,967 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_ARM=y -# CONFIG_EISA is not set -# CONFIG_SBUS is not set -# CONFIG_MCA is not set -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_OBSOLETE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -# CONFIG_KMOD is not set - -# -# System Type -# -# CONFIG_ARCH_ANAKIN is not set -# CONFIG_ARCH_ARCA5K is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_SHARK is not set - -# -# Archimedes/A5000 Implementations -# - -# -# Archimedes/A5000 Implementations (select only ONE) -# -# CONFIG_ARCH_ARC is not set -# CONFIG_ARCH_A5K is not set - -# -# Footbridge Implementations -# -# CONFIG_ARCH_CATS is not set -# CONFIG_ARCH_PERSONAL_SERVER is not set -# CONFIG_ARCH_EBSA285_ADDIN is not set -# CONFIG_ARCH_EBSA285_HOST is not set -# CONFIG_ARCH_NETWINDER is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_ASSABET_NEPONSET is not set -# CONFIG_SA1100_ADSBITSY is not set -# CONFIG_SA1100_BRUTUS is not set -CONFIG_SA1100_CERF=y -# CONFIG_SA1100_CERF_FLASH_8MB is not set -# CONFIG_SA1100_CERF_FLASH_16MB is not set -CONFIG_SA1100_CERF_FLASH_32MB=y -CONFIG_SA1100_CERF_CPLD=y -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_EXTENEX1 is not set -# CONFIG_SA1100_FLEXANET is not set -# CONFIG_SA1100_FREEBIRD is not set -# CONFIG_SA1100_GRAPHICSCLIENT is not set -# CONFIG_SA1100_GRAPHICSMASTER is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HUW_WEBPANEL is not set -# CONFIG_SA1100_ITSY is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_NANOENGINE is not set -# CONFIG_SA1100_OMNIMETER is not set -# CONFIG_SA1100_PANGOLIN is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHERMAN is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_PFS168 is not set -# CONFIG_SA1100_VICTOR is not set -# CONFIG_SA1100_XP860 is not set -# CONFIG_SA1100_YOPY is not set -CONFIG_SA1100_USB=y -CONFIG_SA1100_USB_NETLINK=y -CONFIG_SA1100_USB_CHAR=y - -# -# CLPS711X/EP721X Implementations -# -# CONFIG_ARCH_CDB89712 is not set -# CONFIG_ARCH_CLEP7312 is not set -# CONFIG_ARCH_EDB7211 is not set -# CONFIG_ARCH_P720T is not set -# CONFIG_ARCH_EP7211 is not set -# CONFIG_ARCH_EP7212 is not set -# CONFIG_ARCH_ACORN is not set -# CONFIG_FOOTBRIDGE is not set -# CONFIG_FOOTBRIDGE_HOST is not set -# CONFIG_FOOTBRIDGE_ADDIN is not set -CONFIG_CPU_32=y -# CONFIG_CPU_26 is not set - -# -# Processor Type -# -# CONFIG_CPU_32v3 is not set -CONFIG_CPU_32v4=y -# CONFIG_CPU_ARM610 is not set -# CONFIG_CPU_ARM710 is not set -# CONFIG_CPU_ARM720T is not set -# CONFIG_CPU_ARM920T is not set -# CONFIG_CPU_ARM1020 is not set -# CONFIG_CPU_SA110 is not set -CONFIG_CPU_SA1100=y -# CONFIG_ARM_THUMB is not set -CONFIG_DISCONTIGMEM=y - -# -# General setup -# -# CONFIG_PCI is not set -# CONFIG_ISA is not set -# CONFIG_ISA_DMA is not set -CONFIG_CPU_FREQ=y -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=y -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -# CONFIG_PCMCIA_CLPS6700 is not set -CONFIG_PCMCIA_SA1100=y -CONFIG_NET=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_PM is not set -# CONFIG_APM is not set -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="console=ttySA0 cpufreq_max=221200 root=/dev/mtdblock3 rw mem=64M" -# CONFIG_PFS168_CMDLINE is not set -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_BOOTLDR_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_B1 is not set -# CONFIG_MTD_CFI_B2 is not set -CONFIG_MTD_CFI_B4=y -# CONFIG_MTD_CFI_I1 is not set -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_SUN_UFLASH is not set -# CONFIG_MTD_NORA is not set -# CONFIG_MTD_PNC2000 is not set -# CONFIG_MTD_RPXLITE is not set -# CONFIG_MTD_TQM8XXL is not set -# CONFIG_MTD_SC520CDP is not set -# CONFIG_MTD_NETSC520 is not set -# CONFIG_MTD_SBC_GXX is not set -# CONFIG_MTD_ELAN_104NC is not set -# CONFIG_MTD_DBOX2 is not set -# CONFIG_MTD_CSTM_MIPS_IXX is not set -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_SOLUTIONENGINE is not set -# CONFIG_MTD_MIXMEM is not set -# CONFIG_MTD_OCTAGON is not set -# CONFIG_MTD_VMAX is not set -# CONFIG_MTD_OCELOT is not set -# CONFIG_MTD_L440GX is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_CDB89712 is not set -CONFIG_MTD_SA1100=y -# CONFIG_MTD_DC21285 is not set -# CONFIG_MTD_IQ80310 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_LART is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC1000 is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOCPROBE is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play configuration -# -# CONFIG_PNP is not set -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_BLK_DEV_LVM is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK=y -CONFIG_RTNETLINK=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_FILTER=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_IPV6 is not set -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -# CONFIG_SUNLANCE is not set -# CONFIG_SUNGEM is not set -CONFIG_NET_VENDOR_3COM=y -# CONFIG_EL1 is not set -# CONFIG_EL2 is not set -# CONFIG_ELPLUS is not set -# CONFIG_EL16 is not set -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_CERF_CS8900A=y -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_MYRI_SBUS is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_SK98LIN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -# CONFIG_AIRONET4500_PNP is not set -# CONFIG_AIRONET4500_PCI is not set -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m - -# -# Wireless Pcmcia cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -# CONFIG_PCMCIA_IBMTR is not set -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_ISAPNP is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_ATARAID is not set -# CONFIG_BLK_DEV_ATARAID_PDC is not set -# CONFIG_BLK_DEV_ATARAID_HPT is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input core support -# -# CONFIG_INPUT is not set -# CONFIG_INPUT_KEYBDEV is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -# CONFIG_SERIAL is not set -# CONFIG_SERIAL_EXTENDED is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_ANAKIN is not set -# CONFIG_SERIAL_ANAKIN_CONSOLE is not set -# CONFIG_SERIAL_AMBA is not set -# CONFIG_SERIAL_AMBA_CONSOLE is not set -# CONFIG_SERIAL_CLPS711X is not set -# CONFIG_SERIAL_CLPS711X_CONSOLE is not set -# CONFIG_SERIAL_21285 is not set -# CONFIG_SERIAL_21285_OLD is not set -# CONFIG_SERIAL_21285_CONSOLE is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SA1100_DEFAULT_BAUDRATE=38400 -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set -# CONFIG_SERIAL_8250_HUB6 is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=32 -CONFIG_UCB1200=y -CONFIG_TOUCHSCREEN_UCB1200=y -CONFIG_CERF_TS_MANUAL=y -CONFIG_CERF_TS_MAXX="924" -CONFIG_CERF_TS_MAXY="920" -CONFIG_CERF_TS_MINX="57" -CONFIG_CERF_TS_MINY="52" -CONFIG_CERF_TS_RESX="240" -CONFIG_CERF_TS_RESY="320" -# CONFIG_AUDIO_UCB1200 is not set -# CONFIG_ADC_UCB1200 is not set -# CONFIG_TOUCHSCREEN_H3600 is not set -# CONFIG_PROFILER is not set -# CONFIG_PFS168_SPI is not set -# CONFIG_PFS168_DTMF is not set -# CONFIG_PFS168_MISC is not set -CONFIG_SA1100_CERF_KEYPAD=y - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# L3 serial bus support -# -# CONFIG_L3 is not set -# CONFIG_L3_ALGOBIT is not set -# CONFIG_L3_BIT_SA1100_GPIO is not set -# CONFIG_BIT_SA1100_UCB1200 is not set - -# -# Other L3 adapters -# -# CONFIG_L3_SA1111 is not set - -# -# L3 driver support -# -# CONFIG_L3_DRV_UDA1341 is not set -# CONFIG_BIT_SA1100_GPIO is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set - -# -# Input core support is needed for gameports -# - -# -# Input core support is needed for joysticks -# -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -CONFIG_SA1100_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_CMS_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_UMSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_CRAMFS is not set -# CONFIG_TMPFS is not set -CONFIG_RAMFS=y -# CONFIG_ISO9660_FS is not set -# CONFIG_JOLIET is not set -# CONFIG_MINIX_FS is not set -# CONFIG_FREEVXFS_FS is not set -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# CONFIG_HPFS_FS is not set -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=y -CONFIG_EXT2_FS=y -# CONFIG_SYSV_FS is not set -# CONFIG_UDF_FS is not set -# CONFIG_UDF_RW is not set -# CONFIG_UFS_FS is not set -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -CONFIG_SUNRPC=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -# CONFIG_SMB_FS is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_SMB_NLS is not set -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Console drivers -# -CONFIG_PC_KEYMAP=y -# CONFIG_VGA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_ACORN is not set -# CONFIG_FB_ANAKIN is not set -# CONFIG_FB_CLPS711X is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_SA1100=y -CONFIG_CERF_LCD_38_A=y -# CONFIG_CERF_LCD_57_A is not set -# CONFIG_CERF_LCD_72_A is not set -CONFIG_SA1100_CERF_LCD_BACKLIGHT=y -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB2=y -CONFIG_FBCON_CFB4=y -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_CMPCI is not set -# CONFIG_SOUND_EMU10K1 is not set -# CONFIG_MIDI_EMU10K1 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_ES1370 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ESSSOLO1 is not set -# CONFIG_SOUND_MAESTRO is not set -# CONFIG_SOUND_MAESTRO3 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_RME96XX is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set -# CONFIG_MIDI_VIA82CXXX is not set -# CONFIG_SOUND_ASSABET_UDA1341 is not set -# CONFIG_SOUND_H3600_UDA1341 is not set -# CONFIG_SOUND_PANGOLIN_UDA1341 is not set -# CONFIG_SOUND_SA1111_UDA1341 is not set -CONFIG_SOUND_CERF_UDA1341=y -# CONFIG_SOUND_SA1100SSP is not set -# CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_WAVEARTIST is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Controllers -# -# CONFIG_USB_UHCI is not set -# CONFIG_USB_UHCI_ALT is not set -# CONFIG_USB_OHCI is not set -# CONFIG_USB_OHCI_SA1111 is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# USB Human Interface Devices (HID) -# - -# -# Input core support is needed for USB HID -# - -# -# USB Imaging devices -# -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# - -# -# Video4Linux support is needed for USB Multimedia device support -# -# CONFIG_USB_DABUSB is not set - -# -# USB Network adaptors -# -# CONFIG_USB_PLUSB is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_CDCETHER is not set -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# Miscellaneous USB drivers -# -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_ID75 is not set - -# -# Bluetooth support -# -CONFIG_BT=y -CONFIG_BT_L2CAP=y - -# -# Bluetooth device drivers -# -# CONFIG_BT_HCIUSB is not set -CONFIG_BT_HCIUART=y -# CONFIG_BT_HCIVHCI is not set - -# -# Kernel hacking -# -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_INFO is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_NO_PGT_CACHE is not set -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_DC21285_PORT is not set -# CONFIG_DEBUG_CLPS711X_UART2 is not set diff --git a/arch/arm/configs/cerfpod_defconfig b/arch/arm/configs/cerfpod_defconfig deleted file mode 100644 index b271e290ba959..0000000000000 --- a/arch/arm/configs/cerfpod_defconfig +++ /dev/null @@ -1,894 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_ARM=y -# CONFIG_EISA is not set -# CONFIG_SBUS is not set -# CONFIG_MCA is not set -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_OBSOLETE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -# CONFIG_KMOD is not set - -# -# System Type -# -# CONFIG_ARCH_ANAKIN is not set -# CONFIG_ARCH_ARCA5K is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_SHARK is not set - -# -# Archimedes/A5000 Implementations -# - -# -# Archimedes/A5000 Implementations (select only ONE) -# -# CONFIG_ARCH_ARC is not set -# CONFIG_ARCH_A5K is not set - -# -# Footbridge Implementations -# -# CONFIG_ARCH_CATS is not set -# CONFIG_ARCH_PERSONAL_SERVER is not set -# CONFIG_ARCH_EBSA285_ADDIN is not set -# CONFIG_ARCH_EBSA285_HOST is not set -# CONFIG_ARCH_NETWINDER is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_ASSABET_NEPONSET is not set -# CONFIG_SA1100_ADSBITSY is not set -# CONFIG_SA1100_BRUTUS is not set -CONFIG_SA1100_CERF=y -# CONFIG_SA1100_CERF_FLASH_8MB is not set -CONFIG_SA1100_CERF_FLASH_16MB=y -# CONFIG_SA1100_CERF_FLASH_32MB is not set -# CONFIG_SA1100_CERF_CPLD is not set -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_EXTENEX1 is not set -# CONFIG_SA1100_FLEXANET is not set -# CONFIG_SA1100_FREEBIRD is not set -# CONFIG_SA1100_GRAPHICSCLIENT is not set -# CONFIG_SA1100_GRAPHICSMASTER is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HUW_WEBPANEL is not set -# CONFIG_SA1100_ITSY is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_NANOENGINE is not set -# CONFIG_SA1100_OMNIMETER is not set -# CONFIG_SA1100_PANGOLIN is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHERMAN is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_PFS168 is not set -# CONFIG_SA1100_VICTOR is not set -# CONFIG_SA1100_XP860 is not set -# CONFIG_SA1100_YOPY is not set -CONFIG_SA1100_USB=y -CONFIG_SA1100_USB_NETLINK=y -CONFIG_SA1100_USB_CHAR=y - -# -# CLPS711X/EP721X Implementations -# -# CONFIG_ARCH_CDB89712 is not set -# CONFIG_ARCH_CLEP7312 is not set -# CONFIG_ARCH_EDB7211 is not set -# CONFIG_ARCH_P720T is not set -# CONFIG_ARCH_EP7211 is not set -# CONFIG_ARCH_EP7212 is not set -# CONFIG_ARCH_ACORN is not set -# CONFIG_FOOTBRIDGE is not set -# CONFIG_FOOTBRIDGE_HOST is not set -# CONFIG_FOOTBRIDGE_ADDIN is not set -CONFIG_CPU_32=y -# CONFIG_CPU_26 is not set - -# -# Processor Type -# -# CONFIG_CPU_32v3 is not set -CONFIG_CPU_32v4=y -# CONFIG_CPU_ARM610 is not set -# CONFIG_CPU_ARM710 is not set -# CONFIG_CPU_ARM720T is not set -# CONFIG_CPU_ARM920T is not set -# CONFIG_CPU_ARM1020 is not set -# CONFIG_CPU_SA110 is not set -CONFIG_CPU_SA1100=y -# CONFIG_ARM_THUMB is not set -CONFIG_DISCONTIGMEM=y - -# -# General setup -# -# CONFIG_PCI is not set -# CONFIG_ISA is not set -# CONFIG_ISA_DMA is not set -CONFIG_CPU_FREQ=y -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=y -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -# CONFIG_PCMCIA_CLPS6700 is not set -CONFIG_PCMCIA_SA1100=y -CONFIG_NET=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y - -# -# At least one math emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_PM is not set -# CONFIG_APM is not set -# CONFIG_ARTHUR is not set -CONFIG_CMDLINE="console=ttySA0 root=/dev/mtdblock3 rw mem=32M" -# CONFIG_PFS168_CMDLINE is not set -CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y -CONFIG_LEDS_CPU=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_BOOTLDR_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_SUN_UFLASH is not set -# CONFIG_MTD_NORA is not set -# CONFIG_MTD_PNC2000 is not set -# CONFIG_MTD_RPXLITE is not set -# CONFIG_MTD_TQM8XXL is not set -# CONFIG_MTD_SC520CDP is not set -# CONFIG_MTD_NETSC520 is not set -# CONFIG_MTD_SBC_GXX is not set -# CONFIG_MTD_ELAN_104NC is not set -# CONFIG_MTD_DBOX2 is not set -# CONFIG_MTD_CSTM_MIPS_IXX is not set -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_SOLUTIONENGINE is not set -# CONFIG_MTD_MIXMEM is not set -# CONFIG_MTD_OCTAGON is not set -# CONFIG_MTD_VMAX is not set -# CONFIG_MTD_OCELOT is not set -# CONFIG_MTD_L440GX is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_CDB89712 is not set -CONFIG_MTD_SA1100=y -# CONFIG_MTD_DC21285 is not set -# CONFIG_MTD_IQ80310 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_LART is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC1000 is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOCPROBE is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play configuration -# -# CONFIG_PNP is not set -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_BLK_DEV_LVM is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK=y -CONFIG_RTNETLINK=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_FILTER=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_IPV6 is not set -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -# CONFIG_SUNLANCE is not set -# CONFIG_SUNGEM is not set -CONFIG_NET_VENDOR_3COM=y -# CONFIG_EL1 is not set -# CONFIG_EL2 is not set -# CONFIG_ELPLUS is not set -# CONFIG_EL16 is not set -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_CERF_CS8900A=y -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_MYRI_SBUS is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_SK98LIN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_ARCNET_COM20020_CS is not set -# CONFIG_PCMCIA_IBMTR is not set -# CONFIG_NET_PCMCIA_RADIO is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_ISAPNP is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_ATARAID is not set -# CONFIG_BLK_DEV_ATARAID_PDC is not set -# CONFIG_BLK_DEV_ATARAID_HPT is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input core support -# -# CONFIG_INPUT is not set -# CONFIG_INPUT_KEYBDEV is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_VT_CONSOLE is not set -# CONFIG_SERIAL is not set -# CONFIG_SERIAL_EXTENDED is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_ANAKIN is not set -# CONFIG_SERIAL_ANAKIN_CONSOLE is not set -# CONFIG_SERIAL_AMBA is not set -# CONFIG_SERIAL_AMBA_CONSOLE is not set -# CONFIG_SERIAL_CLPS711X is not set -# CONFIG_SERIAL_CLPS711X_CONSOLE is not set -# CONFIG_SERIAL_21285 is not set -# CONFIG_SERIAL_21285_OLD is not set -# CONFIG_SERIAL_21285_CONSOLE is not set -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SA1100_DEFAULT_BAUDRATE=38400 -# CONFIG_SERIAL_8250 is not set -# CONFIG_SERIAL_8250_CONSOLE is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set -# CONFIG_SERIAL_8250_HUB6 is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=32 -CONFIG_UCB1200=y -CONFIG_TOUCHSCREEN_UCB1200=y -# CONFIG_CERF_TS_MANUAL is not set -CONFIG_AUDIO_UCB1200=y -# CONFIG_ADC_UCB1200 is not set -# CONFIG_TOUCHSCREEN_H3600 is not set -# CONFIG_PROFILER is not set -# CONFIG_PFS168_SPI is not set -# CONFIG_PFS168_DTMF is not set -# CONFIG_PFS168_MISC is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# L3 serial bus support -# -# CONFIG_L3 is not set -# CONFIG_L3_ALGOBIT is not set -# CONFIG_L3_BIT_SA1100_GPIO is not set -# CONFIG_BIT_SA1100_UCB1200 is not set - -# -# Other L3 adapters -# -# CONFIG_L3_SA1111 is not set - -# -# L3 driver support -# -# CONFIG_L3_DRV_UDA1341 is not set -# CONFIG_BIT_SA1100_GPIO is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set - -# -# Input core support is needed for gameports -# - -# -# Input core support is needed for joysticks -# -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -CONFIG_SA1100_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_CMS_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_UMSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_CRAMFS is not set -# CONFIG_TMPFS is not set -CONFIG_RAMFS=y -# CONFIG_ISO9660_FS is not set -# CONFIG_JOLIET is not set -# CONFIG_MINIX_FS is not set -# CONFIG_FREEVXFS_FS is not set -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# CONFIG_HPFS_FS is not set -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=y -CONFIG_EXT2_FS=y -# CONFIG_SYSV_FS is not set -# CONFIG_UDF_FS is not set -# CONFIG_UDF_RW is not set -# CONFIG_UFS_FS is not set -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -CONFIG_SUNRPC=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -# CONFIG_SMB_FS is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_SMB_NLS is not set -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Console drivers -# -CONFIG_PC_KEYMAP=y -# CONFIG_VGA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_ACORN is not set -# CONFIG_FB_ANAKIN is not set -# CONFIG_FB_CLPS711X is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_SA1100=y -# CONFIG_CERF_LCD_38_A is not set -CONFIG_CERF_LCD_57_A=y -# CONFIG_CERF_LCD_72_A is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB2=y -CONFIG_FBCON_CFB4=y -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Controllers -# -# CONFIG_USB_UHCI is not set -# CONFIG_USB_UHCI_ALT is not set -# CONFIG_USB_OHCI is not set -# CONFIG_USB_OHCI_SA1111 is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# USB Human Interface Devices (HID) -# - -# -# Input core support is needed for USB HID -# - -# -# USB Imaging devices -# -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# - -# -# Video4Linux support is needed for USB Multimedia device support -# -# CONFIG_USB_DABUSB is not set - -# -# USB Network adaptors -# -# CONFIG_USB_PLUSB is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_CDCETHER is not set -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_OMNINET is not set - -# -# Miscellaneous USB drivers -# -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_ID75 is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Kernel hacking -# -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_INFO is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_NO_PGT_CACHE is not set -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_DC21285_PORT is not set -# CONFIG_DEBUG_CLPS711X_UART2 is not set diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 39c13fc3b8246..ce732b74d87a6 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -37,9 +37,9 @@ config SA1100_CERF bool "CerfBoard" depends on ARCH_SA1100 help - The Intrinsyc CerfBoard is based on the StrongARM 1110. + The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: - . + . Say Y if configuring for an Intrinsyc CerfBoard. Say N otherwise. @@ -60,15 +60,6 @@ config SA1100_CERF_FLASH_32MB endchoice -config SA1100_CERF_CPLD - bool "Cerf w/CPLD support (CerfPDA)" - depends on SA1100_CERF - help - Say Y here to support the Linux CerfPDA development kit from - Intrinsyc. This is a StrongARM-1110-based reference platform for - designing custom PDAs. Product info is at - . - config SA1100_H3100 bool "Compaq iPAQ H3100" depends on ARCH_SA1100 diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c index 4ae45b51f51f0..f6635a2d0e830 100644 --- a/arch/arm/mach-sa1100/leds-cerf.c +++ b/arch/arm/mach-sa1100/leds-cerf.c @@ -19,24 +19,12 @@ static unsigned int led_state; static unsigned int hw_led_state; -#ifdef CONFIG_SA1100_CERF_CPLD - -#define LED_D0 GPIO_GPIO(0) -#define LED_D1 GPIO_GPIO(0) -#define LED_D2 GPIO_GPIO(0) -#define LED_D3 GPIO_GPIO(0) -#define LED_MASK (LED_D0|LED_D1|LED_D2|LED_D3) - -#else - #define LED_D0 GPIO_GPIO(0) #define LED_D1 GPIO_GPIO(1) #define LED_D2 GPIO_GPIO(2) #define LED_D3 GPIO_GPIO(3) #define LED_MASK (LED_D0|LED_D1|LED_D2|LED_D3) -#endif - void cerf_leds_event(led_event_t evt) { unsigned long flags; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d60478084713e..2043764e5cb72 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -109,29 +109,6 @@ config FB_SA1100 If you plan to use the LCD display with your SA-1100 system, say Y here. -choice - prompt "CerfBoard LCD Display Size" - depends on FB_SA1100 && SA1100_CERF - default CERF_LCD_57_A - -config CERF_LCD_38_A - bool "3.8_Color" - -config CERF_LCD_38_B - bool "3.8_Mono" - -config CERF_LCD_57_A - bool "5.7" - -config CERF_LCD_72_A - bool "7.2" - -endchoice - -config SA1100_CERF_LCD_BACKLIGHT - bool "Cerfboard Backlight (CerfPDA)" - depends on FB_SA1100 && SA1100_CERF_CPLD - config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 926b302f00d9d..488d7bb9aae8b 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -326,54 +326,6 @@ static struct sa1100fb_mach_info brutus_info __initdata = { }; #endif -#ifdef CONFIG_SA1100_CERF -static struct sa1100fb_mach_info cerf_info __initdata = { -#if defined(CONFIG_CERF_LCD_72_A) - .pixclock = 171521, .bpp = 8, - .xres = 640, .yres = 480, - .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2) | - LCCR3_PixClkDiv(38), -#elif defined(CONFIG_CERF_LCD_57_A) - .pixclock = 171521, .bpp = 8, - .xres = 320, .yres = 240, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Pas, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2) | - LCCR3_PixClkDiv(38), -#elif defined(CONFIG_CERF_LCD_38_A) - .pixclock = 171521, .bpp = 8, - .xres = 240, .yres = 320, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Pas, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(56) | - LCCR3_PixClkDiv(38), -#elif defined(CONFIG_CERF_LCD_38_B) - .pixclock = 171521, .bpp = 4, - .xres = 320, .yres = 240, - .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(56) | - LCCR3_PixClkDiv(38), -#else -#error "Must have a CerfBoard LCD form factor selected" -#endif - - .hsync_len = 5, .vsync_len = 1, - .left_margin = 61, .upper_margin = 3, - .right_margin = 9, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - -}; - -#if 0 -static struct sa1100fb_rgb cerf_rgb_16 = { - .red = { .offset = 8, .length = 4, }, - .green = { .offset = 4, .length = 4, }, - .blue = { .offset = 0, .length = 4, }, - .transp = { .offset = 0, .length = 0, }, -}; -#endif -#endif - #ifdef CONFIG_SA1100_FREEBIRD #warning Please check this carefully static struct sa1100fb_mach_info freebird_info __initdata = { @@ -683,11 +635,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi) inf = &brutus_info; } #endif -#ifdef CONFIG_SA1100_CERF - if (machine_is_cerf()) { - inf = &cerf_info; - } -#endif #ifdef CONFIG_SA1100_FREEBIRD if (machine_is_freebird()) { inf = &freebird_info; @@ -1294,10 +1241,6 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) } - /* GPIO15 is used as a bypass for 3.8" displays */ - if (machine_is_cerf()) - mask |= GPIO_GPIO15; - if (mask) { GPDR |= mask; GAFR |= mask; diff --git a/include/asm-arm/arch-sa1100/keyboard.h b/include/asm-arm/arch-sa1100/keyboard.h index e2a0c0196bfc3..3dacd71d9395e 100644 --- a/include/asm-arm/arch-sa1100/keyboard.h +++ b/include/asm-arm/arch-sa1100/keyboard.h @@ -11,7 +11,6 @@ extern void gc_kbd_init_hw(void); extern void smartio_kbd_init_hw(void); -extern void cerf_kbd_init_hw(void); static inline void kbd_init_hw(void) { @@ -19,10 +18,6 @@ static inline void kbd_init_hw(void) gc_kbd_init_hw(); if (machine_is_adsbitsy()) smartio_kbd_init_hw(); -#ifdef CONFIG_SA1100_CERF_CPLD - if (machine_is_cerf()) - cerf_kbd_init_hw(); -#endif } #endif /* _SA1100_KEYBOARD_H */ -- 2.53.0