http://ftp.x.org/contrib/applications/xscreensaver-3.22.tar.gz
[xscreensaver] / configure.in
index e614456efd23100439ace27201bd87ad8f69a640..878757cb6c70a0c87da043c6f6e8d3fdf853fff9 100644 (file)
 
 AC_INIT(driver/subprocs.c)
 AC_CONFIG_HEADER(config.h)
 
 AC_INIT(driver/subprocs.c)
 AC_CONFIG_HEADER(config.h)
-AC_CANONICAL_HOST
 
 
-AC_PROG_CC
+echo "current directory: `pwd`"
+echo "command line was: $0 $@"
 
 
-if test -z "$GCC"; then
-  AC_MSG_CHECKING(how to request ANSI compilation)
-  case "$host" in
-    *-hpux*)
-      AC_MSG_RESULT(HPUX: adding -Ae)
-      CC="$CC -Ae"
-    ;;
-    *-aix*)
-      AC_MSG_RESULT(AIX: adding -qlanglvl=ansi -qhalt=e)
-      CC="$CC -qlanglvl=ansi -qhalt=e"
-    ;;
-    *)
-      AC_MSG_RESULT(no idea)
-    ;;
-  esac
-fi
 
 
+# After checking to see that --srcdir is correct (which AC_INIT does)
+# check for some random other files that come later in the tar file,
+# to make sure everything is here.
+#
+for d in driver utils hacks hacks/glx ; do
+  f=$srcdir/$d/Makefile.in
+  if test \! -r $f ; then
+    echo ""
+    echo "ERROR: The package is incomplete: $f does not exist."
+    echo "       This probably means that your download was truncated."
+    echo ""
+    exit 1
+  fi
+done
 
 
-AC_MSG_CHECKING([whether the compiler works on ANSI C])
-AC_TRY_RUN([ main(int ac, char **av) { return 0; } ],
-   AC_MSG_RESULT(yes),
-   AC_MSG_RESULT(no)
-   AC_MSG_ERROR(Couldn't build even a trivial ANSI C program: check CC.),
-   AC_MSG_ERROR(Couldn't build even a trivial ANSI C program: check CC.))
 
 
-case "$host" in
-  *-irix*)
-  if test -n "$GCC"; then
-    AC_MSG_RESULT(Turning on gcc compiler warnings.)
-    CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"
-  else
-    # not gcc
-    AC_MSG_RESULT(Turning on SGI compiler warnings.)
-    CC="$CC -fullwarn -use_readonly_const -rdata_shared -g3"
-  fi
-  ;;
-esac
+###############################################################################
+#
+#       Function to figure out how to run the compiler.
+#
+###############################################################################
 
 
+AC_DEFUN(AC_PROG_CC_ANSI,
+ [AC_PROG_CC
 
 
-AC_PROG_CPP
-AC_PROG_INSTALL
-AC_PROG_MAKE_SET
+  if test -z "$GCC"; then
+    AC_MSG_CHECKING(how to request ANSI compilation)
+    case "$host" in
+      *-hpux* )
+        AC_MSG_RESULT(HPUX: adding -Ae)
+        CC="$CC -Ae"
+      ;;
+      *-aix* )
+        AC_MSG_RESULT(AIX: adding -qlanglvl=ansi -qhalt=e)
+        CC="$CC -qlanglvl=ansi -qhalt=e"
+      ;;
 
 
-AC_C_CONST
-AC_C_INLINE
+      *-dec-* )
+        AC_MSG_RESULT(DEC: adding -std1)
+        CC="$CC -std1"
+      ;;
 
 
-AC_HEADER_STDC
-AC_HEADER_TIME
-AC_HEADER_SYS_WAIT
-AC_HEADER_DIRENT
+      *)
+        AC_MSG_RESULT(no idea)
+      ;;
+    esac
+  fi
 
 
-AC_TYPE_MODE_T
-AC_TYPE_PID_T
-AC_TYPE_SIZE_T
-AC_TYPE_SIGNAL
+  AC_MSG_CHECKING([whether the compiler works on ANSI C])
+  AC_TRY_RUN([ main(int ac, char **av) { return 0; } ],
+     AC_MSG_RESULT(yes),
+     AC_MSG_RESULT(no)
+     AC_MSG_ERROR(Couldn't build even a trivial ANSI C program: check CC.),
+     AC_MSG_ERROR(Couldn't build even a trivial ANSI C program: check CC.))
 
 
-AC_MSG_CHECKING(how to call gettimeofday)
-AC_CACHE_VAL(ac_cv_gettimeofday_args,
- [AC_TRY_COMPILE([#include <stdlib.h>
-                 #include <sys/time.h>],
-                [struct timeval tv; gettimeofday(&tv);],
-                [ac_gettimeofday_args=1],
-                [AC_TRY_COMPILE([#include <stdlib.h>
-                                 #include <sys/time.h>],
-                                [struct timeval tv; struct timezone tzp;
-                                 gettimeofday(&tv, &tzp);],
-                                [ac_gettimeofday_args=2],
-                                [ac_gettimeofday_args=0])])
-  ac_cv_gettimeofday_args=$ac_gettimeofday_args])
-ac_gettimeofday_args=$ac_cv_gettimeofday_args
-if test $ac_gettimeofday_args = 1 ; then
-  AC_DEFINE(HAVE_GETTIMEOFDAY)
-  AC_MSG_RESULT(one argument)
-elif test $ac_gettimeofday_args = 2 ; then
-  AC_DEFINE(HAVE_GETTIMEOFDAY)
-  AC_DEFINE(GETTIMEOFDAY_TWO_ARGS)
-  AC_MSG_RESULT(two arguments)
-else
-  AC_MSG_RESULT(unknown)
-fi
+  if test -n "$GCC"; then
+    AC_MSG_RESULT(Turning on gcc compiler warnings.)
+    CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"
+    AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
+    CC="$CC -Wp,-lang-c89"
+  else
+    case "$host" in
+      *-irix5* |*-irix6.[0-3]* )
+        AC_MSG_RESULT(Turning on SGI compiler warnings.)
+        CC="$CC -fullwarn -use_readonly_const -rdata_shared -g3"
+      ;;
+#     *-dec-osf* )
+#       if test -z "$GCC"; then
+#         AC_MSG_RESULT(Turning on DEC C compiler warnings.)
+#         CC="$CC -migrate -w0 -verbose -warnprotos"
+#       fi
+#     ;;
+    esac
+  fi
+])
 
 
 
 
-AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv)
-AC_CHECK_FUNCS(sigaction)
+###############################################################################
+#
+#       Function to figure out how to create directory trees.
+#
+###############################################################################
+
+AC_DEFUN(AC_PROG_INSTALL_DIRS,
+ [AC_CACHE_CHECK([whether \"\${INSTALL} -d\" creates intermediate directories],
+    ac_cv_install_d_creates_dirs,
+    [ac_cv_install_d_creates_dirs=no
+     rm -rf conftestdir
+     if mkdir conftestdir; then
+       cd conftestdir >&-
+       ${INSTALL} -d `pwd`/dir1/dir2 >&- 2>&-
+       if test -d dir1/dir2/. ; then
+         ac_cv_install_d_creates_dirs=yes
+       fi
+       cd .. >&-
+       rm -rf conftestdir
+     fi
+    ])
+
+  if test "$ac_cv_install_d_creates_dirs" = no ; then
+    AC_CACHE_CHECK([whether \"mkdir -p\" creates intermediate directories],
+      ac_cv_mkdir_p_creates_dirs,
+      [ac_cv_mkdir_p_creates_dirs=no
+       rm -rf conftestdir
+       if mkdir conftestdir; then
+         cd conftestdir >&-
+         mkdir -p dir1/dir2 >&- 2>&-
+         if test -d dir1/dir2/. ; then
+           ac_cv_mkdir_p_creates_dirs=yes
+         fi
+         cd .. >&-
+         rm -rf conftestdir
+       fi
+      ])
+  fi
 
 
-AC_CHECK_HEADERS(unistd.h)
+  if test "$ac_cv_install_d_creates_dirs" = yes ; then
+    INSTALL_DIRS='${INSTALL} -d'
+  elif test "$ac_cv_mkdir_p_creates_dirs" = yes ; then
+    INSTALL_DIRS='mkdir -p'
+  else
+    # any other ideas?
+    INSTALL_DIRS='${INSTALL} -d'
+  fi
+])
 
 
-dnl    /usr/local/src/ssh-1.2.17/putenv.c -- AC_REPLACE_FUNCS(putenv)
+
+###############################################################################
+#
+#       Function to check whether gettimeofday() exists, and how to call it.
+#      This may define HAVE_GETTIMEOFDAY and GETTIMEOFDAY_TWO_ARGS.
+#
+###############################################################################
+
+AC_DEFUN(AC_GETTIMEOFDAY_ARGS,
+ [AC_MSG_CHECKING(how to call gettimeofday)
+  AC_CACHE_VAL(ac_cv_gettimeofday_args,
+   [AC_TRY_COMPILE([#include <stdlib.h>
+                    #include <sys/time.h>],
+                   [struct timeval tv; struct timezone tzp;
+                    gettimeofday(&tv, &tzp);],
+                   [ac_gettimeofday_args=2],
+                   [AC_TRY_COMPILE([#include <stdlib.h>
+                                    #include <sys/time.h>],
+                                   [struct timeval tv; gettimeofday(&tv);],
+                                   [ac_gettimeofday_args=1],
+                                   [ac_gettimeofday_args=0])])
+    ac_cv_gettimeofday_args=$ac_gettimeofday_args])
+  ac_gettimeofday_args=$ac_cv_gettimeofday_args
+  if test "$ac_gettimeofday_args" = 1 ; then
+    AC_DEFINE(HAVE_GETTIMEOFDAY)
+    AC_MSG_RESULT(one argument)
+  elif test "$ac_gettimeofday_args" = 2 ; then
+    AC_DEFINE(HAVE_GETTIMEOFDAY)
+    AC_DEFINE(GETTIMEOFDAY_TWO_ARGS)
+    AC_MSG_RESULT(two arguments)
+  else
+    AC_MSG_RESULT(unknown)
+  fi
+])
 
 
 
 
-AC_ARG_ENABLE(subdir,[
-Installation options:
+###############################################################################
+#
+#       Function to find perl5 (defines PERL and PERL_VERSION.)
+#
+###############################################################################
 
 
-  --enable-subdir=DIR     Put the demo programs in a subdirectory of \`bindir',
-                          instead of putting them in bindir itself.  You can
-                          specify the name of the subdirectory.  For example,
-                          --exec-prefix=/usr/local/bin --enable-subdir=demos
-                          would put xscreensaver in /usr/local/bin/, and would
-                          put the demos in /usr/local/bin/demos/.  Note that if
-                          you do this, you must make sure that the directory
-                          is on your \$PATH before xscreensaver is started: the
-                          directory name is not hardcoded into the program.
-                          This merely sets the default installation location.
+# M4 sucks!!  perl sucks too!!
+changequote(X,Y)
+perl_version_cmd='print $]'
+changequote([,])
 
 
-  --disable-subdir        Just put the demos in \`bindir' (this is the default.)
-],
-  [enable_subdir="$enableval"],[enable_subdir=no])
-if test x"$enable_subdir" = xno; then
-  HACKDIR='$(bindir)'
-elif test x"$enable_subdir" = xyes -o x"$enable_subdir" = x ; then
-  echo "error: must be a subdirectory name: --enable-subdir=$enable_subdir"
-  exit 1
-else
-  HACKDIR='$(bindir)/'$enable_subdir
-fi
+AC_DEFUN(AC_PROG_PERL,
+ [AC_PATH_PROGS(PERL, [perl5 perl],,)
+  if test -z "$PERL" ; then
+    PERL_VERSION=0
+  else
+    AC_CACHE_CHECK([perl version], ac_cv_perl_version,
+                   [ac_cv_perl_version=`$PERL -e "$perl_version_cmd"`])
+    PERL_VERSION=$ac_cv_perl_version
+  fi
+ ])
 
 
 
 
-AC_PATH_XTRA
+###############################################################################
+#
+#       Functions to check how to do ICMP PING requests.
+#
+###############################################################################
+
+AC_DEFUN(AC_CHECK_ICMP,
+ [AC_CACHE_CHECK([for struct icmp], ac_cv_have_icmp,
+  [AC_TRY_COMPILE([#include <stdlib.h>
+                   #include <stdio.h>
+                   #include <math.h>
+                   #include <unistd.h>
+                   #include <limits.h>
+                   #include <signal.h>
+                   #include <fcntl.h>
+                   #include <sys/types.h>
+                   #include <sys/time.h>
+                   #include <sys/ipc.h>
+                   #include <sys/shm.h>
+                   #include <sys/socket.h>
+                   #include <netinet/in_systm.h>
+                   #include <netinet/in.h>
+                   #include <netinet/ip.h>
+                   #include <netinet/ip_icmp.h>
+                   #include <netinet/udp.h>
+                   #include <arpa/inet.h>
+                   #include <netdb.h>],
+                  [struct icmp i;
+                   struct sockaddr s;
+                   struct sockaddr_in si;
+                   struct ip ip;
+                   i.icmp_type = ICMP_ECHO;
+                   i.icmp_code = 0;
+                   i.icmp_cksum = 0;
+                   i.icmp_id = 0;
+                   i.icmp_seq = 0;
+                   si.sin_family = AF_INET;
+                   ip.ip_hl = 0;],
+                  [ac_cv_have_icmp=yes],
+                  [ac_cv_have_icmp=no])])
+ if test "$ac_cv_have_icmp" = yes ; then
+   AC_DEFINE(HAVE_ICMP)
+ fi])
+
+AC_DEFUN(AC_CHECK_ICMPHDR,
+ [AC_CACHE_CHECK([for struct icmphdr], ac_cv_have_icmphdr,
+  [AC_TRY_COMPILE([#include <stdlib.h>
+                   #include <stdio.h>
+                   #include <math.h>
+                   #include <unistd.h>
+                   #include <limits.h>
+                   #include <signal.h>
+                   #include <fcntl.h>
+                   #include <sys/types.h>
+                   #include <sys/time.h>
+                   #include <sys/ipc.h>
+                   #include <sys/shm.h>
+                   #include <sys/socket.h>
+                   #include <netinet/in_systm.h>
+                   #include <netinet/in.h>
+                   #include <netinet/ip.h>
+                   #include <netinet/ip_icmp.h>
+                   #include <netinet/udp.h>
+                   #include <arpa/inet.h>
+                   #include <netdb.h>],
+                  [struct icmphdr i;
+                   struct sockaddr s;
+                   struct sockaddr_in si;
+                   struct ip ip;
+                   i.type = ICMP_ECHO;
+                   i.code = 0;
+                   i.cksum = 0;
+                   i.un.echo.id = 0;
+                   i.un.echo.sequence = 0;
+                   si.sin_family = AF_INET;
+                   ip.ip_hl = 0;],
+                  [ac_cv_have_icmphdr=yes],
+                  [ac_cv_have_icmphdr=no])])
+ if test "$ac_cv_have_icmphdr" = yes ; then
+   AC_DEFINE(HAVE_ICMPHDR)
+ fi])
+
+
+###############################################################################
+#
+#       Functions to check for various X11 crap.
+#
+###############################################################################
 
 # Try and find the app-defaults directory.
 # It sucks that autoconf doesn't do this already...
 #
 
 # Try and find the app-defaults directory.
 # It sucks that autoconf doesn't do this already...
 #
-AC_DEFUN(AC_PATH_X_APP_DEFAULTS_XMKMF,
-  [
+AC_DEFUN(AC_PATH_X_APP_DEFAULTS_XMKMF,[
   rm -fr conftestdir
   if mkdir conftestdir; then
   rm -fr conftestdir
   if mkdir conftestdir; then
-    cd conftestdir
+    cd conftestdir >&-
     # Make sure to not put "make" in the Imakefile rules, since we grep it out.
     cat > Imakefile <<'EOF'
 acfindx:
     # Make sure to not put "make" in the Imakefile rules, since we grep it out.
     cat > Imakefile <<'EOF'
 acfindx:
@@ -143,60 +298,60 @@ EOF
       # GNU make sometimes prints "make[1]: Entering...", which'd confuse us.
       eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
     fi
       # GNU make sometimes prints "make[1]: Entering...", which'd confuse us.
       eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
     fi
-    cd ..
+    cd .. >&-
     rm -fr conftestdir
   fi])
 
     rm -fr conftestdir
   fi])
 
-AC_DEFUN(AC_PATH_X_APP_DEFAULTS_DIRECT,
-[  # Look for the directory under a standard set of common directories.
+AC_DEFUN(AC_PATH_X_APP_DEFAULTS_DIRECT,[
+  # Look for the directory under a standard set of common directories.
   # Check X11 before X11Rn because it's often a symlink to the current release.
   # Check X11 before X11Rn because it's often a symlink to the current release.
-  for ac_dir in                                        \
-    /usr/X11/lib/app-defaults                  \
-    /usr/X11R6/lib/app-defaults                        \
-    /usr/X11R6/lib/X11/app-defaults            \
-    /usr/X11R5/lib/app-defaults                        \
-    /usr/X11R5/lib/X11/app-defaults            \
-    /usr/X11R4/lib/app-defaults                        \
-    /usr/X11R4/lib/X11/app-defaults            \
-                                               \
-    /usr/lib/X11/app-defaults                  \
-    /usr/lib/X11R6/app-defaults                        \
-    /usr/lib/X11R5/app-defaults                        \
-    /usr/lib/X11R4/app-defaults                        \
-                                               \
-    /usr/local/X11/lib/app-defaults            \
-    /usr/local/X11R6/lib/app-defaults          \
-    /usr/local/X11R5/lib/app-defaults          \
-    /usr/local/X11R4/lib/app-defaults          \
-                                               \
-    /usr/local/lib/X11/app-defaults            \
-    /usr/local/lib/X11R6/app-defaults          \
-    /usr/local/lib/X11R6/X11/app-defaults      \
-    /usr/local/lib/X11R5/app-defaults          \
-    /usr/local/lib/X11R5/X11/app-defaults      \
-    /usr/local/lib/X11R4/app-defaults          \
-    /usr/local/lib/X11R4/X11/app-defaults      \
-                                               \
-    /usr/X386/lib/X11/app-defaults             \
-    /usr/x386/lib/X11/app-defaults             \
-    /usr/XFree86/lib/X11/app-defaults          \
-                                               \
-    /usr/lib/X11/app-defaults                  \
-    /usr/local/lib/X11/app-defaults            \
-    /usr/unsupported/lib/X11/app-defaults      \
-    /usr/athena/lib/X11/app-defaults           \
-    /usr/local/x11r5/lib/X11/app-defaults      \
-    /usr/lpp/Xamples/lib/X11/app-defaults      \
-    /lib/usr/lib/X11/app-defaults              \
-                                               \
-    /usr/openwin/lib/app-defaults              \
-    /usr/openwin/lib/X11/app-defaults          \
-    /usr/openwin/share/lib/app-defaults                \
-    /usr/openwin/share/lib/X11/app-defaults    \
-                                               \
-    /X11R6/lib/app-defaults                    \
-    /X11R5/lib/app-defaults                    \
-    /X11R4/lib/app-defaults                    \
+  for ac_dir in                                 \
+    /usr/X11/lib/app-defaults                   \
+    /usr/X11R6/lib/app-defaults                 \
+    /usr/X11R6/lib/X11/app-defaults             \
+    /usr/X11R5/lib/app-defaults                 \
+    /usr/X11R5/lib/X11/app-defaults             \
+    /usr/X11R4/lib/app-defaults                 \
+    /usr/X11R4/lib/X11/app-defaults             \
+                                                \
+    /usr/lib/X11/app-defaults                   \
+    /usr/lib/X11R6/app-defaults                 \
+    /usr/lib/X11R5/app-defaults                 \
+    /usr/lib/X11R4/app-defaults                 \
+                                                \
+    /usr/local/X11/lib/app-defaults             \
+    /usr/local/X11R6/lib/app-defaults           \
+    /usr/local/X11R5/lib/app-defaults           \
+    /usr/local/X11R4/lib/app-defaults           \
+                                                \
+    /usr/local/lib/X11/app-defaults             \
+    /usr/local/lib/X11R6/app-defaults           \
+    /usr/local/lib/X11R6/X11/app-defaults       \
+    /usr/local/lib/X11R5/app-defaults           \
+    /usr/local/lib/X11R5/X11/app-defaults       \
+    /usr/local/lib/X11R4/app-defaults           \
+    /usr/local/lib/X11R4/X11/app-defaults       \
+                                                \
+    /usr/X386/lib/X11/app-defaults              \
+    /usr/x386/lib/X11/app-defaults              \
+    /usr/XFree86/lib/X11/app-defaults           \
+                                                \
+    /usr/lib/X11/app-defaults                   \
+    /usr/local/lib/X11/app-defaults             \
+    /usr/unsupported/lib/X11/app-defaults       \
+    /usr/athena/lib/X11/app-defaults            \
+    /usr/local/x11r5/lib/X11/app-defaults       \
+    /usr/lpp/Xamples/lib/X11/app-defaults       \
+    /lib/usr/lib/X11/app-defaults               \
+                                                \
+    /usr/openwin/lib/app-defaults               \
+    /usr/openwin/lib/X11/app-defaults           \
+    /usr/openwin/share/lib/app-defaults         \
+    /usr/openwin/share/lib/X11/app-defaults     \
+                                                \
+    /X11R6/lib/app-defaults                     \
+    /X11R5/lib/app-defaults                     \
+    /X11R4/lib/app-defaults                     \
     ; \
   do
     if test -d "$ac_dir"; then
     ; \
   do
     if test -d "$ac_dir"; then
@@ -206,12 +361,13 @@ AC_DEFUN(AC_PATH_X_APP_DEFAULTS_DIRECT,
   done
 ])
 
   done
 ])
 
-
 AC_DEFUN(AC_PATH_X_APP_DEFAULTS,
   [AC_REQUIRE_CPP()
     AC_CACHE_CHECK([for X app-defaults directory], ac_cv_x_app_defaults,
      [AC_PATH_X_APP_DEFAULTS_XMKMF
 AC_DEFUN(AC_PATH_X_APP_DEFAULTS,
   [AC_REQUIRE_CPP()
     AC_CACHE_CHECK([for X app-defaults directory], ac_cv_x_app_defaults,
      [AC_PATH_X_APP_DEFAULTS_XMKMF
-      AC_PATH_X_APP_DEFAULTS_DIRECT
+      if test x"$ac_x_app_defaults" = x; then
+        AC_PATH_X_APP_DEFAULTS_DIRECT
+      fi
       if test x"$ac_x_app_defaults" = x; then
         ac_cv_x_app_defaults="/usr/lib/X11/app-defaults"
       else
       if test x"$ac_x_app_defaults" = x; then
         ac_cv_x_app_defaults="/usr/lib/X11/app-defaults"
       else
@@ -220,10 +376,142 @@ AC_DEFUN(AC_PATH_X_APP_DEFAULTS,
       fi])
     eval ac_x_app_defaults="$ac_cv_x_app_defaults"])
 
       fi])
     eval ac_x_app_defaults="$ac_cv_x_app_defaults"])
 
-AC_PATH_X_APP_DEFAULTS
 
 
-APPDEFAULTS=$ac_x_app_defaults
+AC_DEFUN(AC_XPOINTER,
+ [AC_CACHE_CHECK([for XPointer], ac_cv_xpointer,
+                 [AC_TRY_X_COMPILE([#include <X11/Xlib.h>],
+                                   [XPointer foo = (XPointer) 0;],
+                                   [ac_cv_xpointer=yes],
+                                   [ac_cv_xpointer=no])])
+  if test "$ac_cv_xpointer" != yes; then
+   AC_DEFINE(XPointer,[char*])
+  fi])
+
+
+# Random special-cases for X on certain pathological OSes.
+# You know who you are.
+#
+AC_DEFUN(AC_X_RANDOM_PATHS,
+ [case "$host" in
+    *-hpux*)
+
+      # The following arcana was gleaned from conversations with
+      # Eric Schwartz <erics@col.hp.com>:
+      #
+      # On HPUX 10.x, the parts of X that HP considers "standard" live in
+      # /usr/{include,lib}/X11R6/.  The parts that HP doesn't consider
+      # "standard", notably, Xaw and Xmu, live in /usr/contrib/X11R6/.
+      # Yet /usr/contrib/X11R6/ comes preinstalled on all HPUX systems.
+      # Also, there are symlinks from /usr/include/ and /usr/lib/ into
+      # /usr/{include,lib}/X11R6/, so that (if you don't use Xmu at all)
+      # you don't need any -I or -L arguments.
+      #
+      # On HPUX 9.x, /usr/{include,lib}/X11R5/ and /usr/contrib/X11R5/
+      # are the same division as 10.x.  However, there are no symlinks to
+      # the X stuff from /usr/include/ and /usr/lib/, so -I and -L
+      # arguments are always necessary.
+      #
+      # However, X11R6 was available on HPUX 9.x as a patch: if that
+      # patch was installed, then all of X11R6 went in to
+      # /usr/contrib/X11R6/ (there was no /usr/{include,lib}/X11R6/.)
+      #
+      # HPUX 8.x was the same as 9.x, but was X11R4 instead (I don't know
+      # whether R5 was available as a patch; R6 undoubtedly was not.)
+      #
+      # So.  We try and use the highest numbered pair of
+      # /usr/{include,lib}/X11R?/ and /usr/contrib/X11R?/{include,lib}/
+      # that are available.  We do not mix and match different versions
+      # of X.
+      #
+      # Question I still don't know the answer to: (do you?)
+      #
+      #   * On HPUX 9.x, where /usr/include/X11R5/ was standard, and
+      #     /usr/contrib/X11R6/ could be installed as a patch, what was in
+      #     that contrib directory?  Did it contain so-called "standard"
+      #     X11R6, or did it include Xaw and Xmu as well?  If the former,
+      #     where did one find Xaw and Xmu on 9.x R6 systems?  Would this
+      #     be a situation where one had to reach into the R5 headers and
+      #     libs to find Xmu?  That is, must both R6 and R5 directories
+      #     be on the -I and -L lists in that case?
+      #
+      for version in X11R6 X11R5 X11R4 ; do
+        # if either pair of directories exists...
+        if test -d /usr/lib/$version || test -d /usr/contrib/$version/lib
+        then
+           # if contrib exists, use it...
+           if test -d /usr/contrib/$version/lib ; then
+             X_CFLAGS="$X_CFLAGS -I/usr/contrib/$version/include"
+             X_LIBS="$X_LIBS -L/usr/contrib/$version/lib"
+           fi
+           # if the "standard" one exists, use it.
+           if test -d /usr/lib/$version ; then
+             X_CFLAGS="$X_CFLAGS -I/usr/include/$version"
+             X_LIBS="$X_LIBS -L/usr/lib/$version"
+           fi
+           # since at least one of the pair exists, go no farther.
+           break
+        fi
+      done
+
+      # Now find Motif.  Thanks for not making xmkmf find this by
+      # default, you losers.
+      #
+      if test -d /usr/lib/Motif1.2 ; then
+        X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.2"
+        X_LIBS="$X_LIBS -L/usr/lib/Motif1.2"
+      elif test -d /usr/lib/Motif1.1 ; then
+        X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.1"
+        X_LIBS="$X_LIBS -L/usr/lib/Motif1.1"
+      fi
+
+      # Now let's check for the pseudo-standard locations for OpenGL and XPM.
+      #
+      if test -d /opt/Mesa/lib ; then
+        X_CFLAGS="-I/opt/Mesa/include $X_CFLAGS"
+        X_LIBS="-L/opt/Mesa/lib $X_LIBS"
+      fi
+
+      if test -d /opt/xpm/lib/X11 ; then
+        X_CFLAGS="-I/opt/xpm/include $X_CFLAGS"
+        X_LIBS="-L/opt/xpm/lib/X11 $X_LIBS"
+      fi
+
+      # On HPUX, default to installing in /opt/xscreensaver/ instead of
+      # in /usr/local/, unless there is already an xscreensaver in
+      # /usr/local/bin/.  This can be overridden with the --prefix arg
+      # to configure.  I'm not sure this is the right thing to do, but
+      # Richard Lloyd says so...
+      #
+      if test \! -x /usr/local/bin/xscreensaver ; then
+        ac_default_prefix=/opt/xscreensaver
+      fi
+
+    ;;
+    *-solaris*)
+
+      # Thanks for not making xmkmf find this by default, pinheads.
+      # And thanks for moving things around again, too.  Is this
+      # really the standard location now?  What happened to the
+      # joke that this kind of thing went in /opt?
+      # cthomp says "answer: CDE (Common Disorganized Environment)"
+      #
+      if test -f /usr/dt/include/Xm/Xm.h ; then
+        X_CFLAGS="$X_CFLAGS -I/usr/dt/include"
+        X_LIBS="$X_LIBS -L/usr/dt/lib -R:/usr/dt/lib"
+
+        # Some versions of Slowlaris Motif require -lgen.  But not all.  Why?
+        AC_CHECK_LIB(gen, regcmp, [X_LIBS="$X_LIBS -lgen"])
+      fi
+    ;;
+  esac])
+
+
 
 
+###############################################################################
+#
+#       Some utility functions to make checking for X things easier.
+#
+###############################################################################
 
 # Like AC_CHECK_HEADER, but it uses the already-computed -I directories.
 #
 
 # Like AC_CHECK_HEADER, but it uses the already-computed -I directories.
 #
@@ -265,22 +553,25 @@ AC_DEFUN(AC_TRY_X_COMPILE, [
 AC_DEFUN(AC_CHECK_X_LIB, [
   ac_save_CPPFLAGS="$CPPFLAGS"
   ac_save_LDFLAGS="$LDFLAGS"
 AC_DEFUN(AC_CHECK_X_LIB, [
   ac_save_CPPFLAGS="$CPPFLAGS"
   ac_save_LDFLAGS="$LDFLAGS"
+#  ac_save_LIBS="$LIBS"
+
   if test \! -z "$includedir" ; then 
     CPPFLAGS="$CPPFLAGS -I$includedir"
   fi
   if test \! -z "$includedir" ; then 
     CPPFLAGS="$CPPFLAGS -I$includedir"
   fi
-  if test \! -z "$includedir" ; then 
-    CPPFLAGS="$CPPFLAGS -I$includedir"
-  fi
+  # note: $X_CFLAGS includes $x_includes
+  CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
   if test \! -z "$libdir" ; then
     LDFLAGS="$LDFLAGS -L$libdir"
   fi
   if test \! -z "$libdir" ; then
     LDFLAGS="$LDFLAGS -L$libdir"
   fi
-  CPPFLAGS="$CPPFLAGS $X_CFLAGS"
-  if test \! -z "$x_libraries" ; then
-    LDFLAGS="$LDFLAGS -L$x_libraries"
-  fi
+  # note: $X_LIBS includes $x_libraries
+  LDFLAGS="$LDFLAGS $X_LIBS $X_EXTRA_LIBS"
+
   AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5])
   CPPFLAGS="$ac_save_CPPFLAGS"
   AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5])
   CPPFLAGS="$ac_save_CPPFLAGS"
-  LDFLAGS="$ac_save_LDFLAGS"])
+  LDFLAGS="$ac_save_LDFLAGS"
+#  LIBS="$ac_save_LIBS"
+  ])
 
 # Like AC_TRY_RUN, but it uses the already-computed -I directories.
 # (But not the -L directories!)
 
 # Like AC_TRY_RUN, but it uses the already-computed -I directories.
 # (But not the -L directories!)
@@ -296,75 +587,127 @@ AC_DEFUN(AC_TRY_X_RUN, [
 
 
 
 
 
 
+# Usage: HANDLE_X_PATH_ARG([variable_name],
+#                          [--command-line-option],
+#                          [descriptive string])
+#
+# All of the --with options take three forms:
+#
+#   --with-foo (or --with-foo=yes)
+#   --without-foo (or --with-foo=no)
+#   --with-foo=/DIR
+#
+# This function, HANDLE_X_PATH_ARG, deals with the /DIR case.  When it sees
+# a directory (string beginning with a slash) it checks to see whether
+# /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS
+# as appropriate.
+#
+AC_DEFUN(HANDLE_X_PATH_ARG, [
+   case "$[$1]" in
+    yes) ;;
+    no)  ;;
+
+    /*)
+     AC_MSG_CHECKING([for [$3] headers])
+     d=$[$1]/include
+     if test -d $d; then
+       X_CFLAGS="-I$d $X_CFLAGS"
+       AC_MSG_RESULT($d)
+     else
+       AC_MSG_RESULT(not found ($d: no such directory))
+     fi
+
+     AC_MSG_CHECKING([for [$3] libs])
+     d=$[$1]/lib
+     if test -d $d; then
+       X_LIBS="-L$d $X_LIBS"
+       AC_MSG_RESULT($d)
+     else
+       AC_MSG_RESULT(not found ($d: no such directory))
+     fi
+
+     # replace the directory string with "yes".
+     [$1]_req="yes"
+     [$1]=$[$1]_req
+     ;;
 
 
+    *)
+     echo ""
+     echo "error: argument to [$2] must be \"yes\", \"no\", or a directory."
+     echo "       If it is a directory, then \`DIR/include' will be added to"
+     echo "       the -I list, and \`DIR/lib' will be added to the -L list."
+     exit 1
+     ;;
+   esac
+  ])
 
 
-# check for the HP XHPDisableReset server extension headers.
-#
-AC_EGREP_X_HEADER(XHPDisableReset, X11/XHPlib.h,
-                 [AC_DEFINE(HAVE_XHPDISABLERESET)
-                  SAVER_LIBS="-lXhp11 $SAVER_LIBS"])
 
 
 
 
-# Check for the availability of the XPointer typedef, and define it otherwise.
+###############################################################################
+###############################################################################
 #
 #
-AC_CACHE_CHECK([for XPointer], ac_cv_xpointer,
-               [AC_TRY_X_COMPILE([#include <X11/Xlib.h>],
-                                 [XPointer foo = (XPointer) 0;],
-                                 [ac_cv_xpointer=yes],
-                                 [ac_cv_xpointer=no])])
-if test $ac_cv_xpointer != yes; then
-  AC_DEFINE(XPointer,[char*])
-fi
+#       End of function definitions.  Now start actually executing stuff.
+#
+###############################################################################
+###############################################################################
 
 
+# random compiler setup
+AC_CANONICAL_HOST
+AC_PROG_CC_ANSI
+AC_PROG_CPP
+AC_C_CONST
+AC_C_INLINE
 
 
-case "$host" in
-  *-hpux*)
-    # Thanks for not making xmkmf find this by default, you losers.
-    if test -d /usr/lib/Motif1.2 ; then
-      X_CFLAGS="-I/usr/include/Motif1.2 $X_CFLAGS"
-      X_LIBS="-L/usr/lib/Motif1.2 $X_LIBS"
-    elif test -d /usr/lib/Motif1.1 ; then
-      X_CFLAGS="-I/usr/include/Motif1.1 $X_CFLAGS"
-      X_LIBS="-L/usr/lib/Motif1.1 $X_LIBS"
-    fi
+# stuff for Makefiles
+AC_PROG_INSTALL
+AC_PROG_INSTALL_DIRS
+AC_PROG_MAKE_SET
 
 
-    # This too.  You losers.
-    if test -d /usr/contrib/X11R6/include ; then
-      X_CFLAGS="-I/usr/contrib/X11R6/include $X_CFLAGS"
-      X_LIBS="-L/usr/contrib/X11R6/lib $X_LIBS"
-    elif test -d /usr/X11R6/include ; then
-      X_CFLAGS="-I/usr/X11R6/include $X_CFLAGS"
-      X_LIBS="-L/usr/X11R6/lib $X_LIBS"
-    elif test -d /usr/contrib/X11R5/include ; then
-      X_CFLAGS="-I/usr/contrib/X11R5/include $X_CFLAGS"
-      X_LIBS="-L/usr/contrib/X11R5/lib $X_LIBS"
-    elif test -d /usr/X11R5/include ; then
-      X_CFLAGS="-I/usr/X11R5/include $X_CFLAGS"
-      X_LIBS="-L/usr/X11R5/lib $X_LIBS"
-    fi
+# random libc stuff
+AC_HEADER_STDC
+AC_CHECK_HEADERS(unistd.h)
+AC_TYPE_MODE_T
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_TYPE_SIGNAL
+AC_HEADER_TIME
+AC_HEADER_SYS_WAIT
+AC_HEADER_DIRENT
+AC_GETTIMEOFDAY_ARGS
+AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv)
 
 
-  ;;
-  *-solaris*)
-    # Same to you, pinheads.  (Is this really the standard location now?
-    # What happened to the joke that this kind of thing went in /opt?)
-    # cthomp says "answer: CDE (Common Disorganized Environment)"
-    if test -f /usr/dt/include/Xm/Xm.h ; then
-      X_CFLAGS="$X_CFLAGS -I/usr/dt/include"
-      X_LIBS="$X_LIBS -L/usr/dt/lib -R:/usr/dt/lib"
-
-      # Some versions of Slowlaris Motif require -lgen.  But not all.  Why?
-      AC_CHECK_LIB(gen, regcmp, [X_LIBS="$X_LIBS -lgen"])
-    fi
-  ;;
-esac
+AC_CHECK_FUNCS(sigaction syslog realpath)
+AC_CHECK_ICMP
+AC_CHECK_ICMPHDR
+AC_CHECK_HEADERS(crypt.h sys/select.h)
+AC_PROG_PERL
+
+if test -z "$PERL" ; then
+  # don't let it be blank...
+  PERL=/usr/local/bin/perl5
+fi
+
+AC_PATH_XTRA
+
+if test "$have_x" != yes; then
+  AC_MSG_ERROR(Couldn't find X11 headers/libs.  Try \`$0 --help'.)
+fi
+
+AC_PATH_X_APP_DEFAULTS
+AC_X_RANDOM_PATHS
+AC_XPOINTER
 
 
 
 
 
 
-# Check for Xmu (some fucked up vendors don't ship it...)
+###############################################################################
 #
 #
+#       Check for -lXmu (some fucked up vendors don't ship it...)
+#
+###############################################################################
+
 have_xmu=no
 AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes])
 have_xmu=no
 AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes])
-if test $have_xmu = no ; then
+if test "$have_xmu" = no ; then
   XMU_SRCS='$(UTILS_SRC)/xmu.c'
   XMU_OBJS='$(UTILS_BIN)/xmu.o'
 else
   XMU_SRCS='$(UTILS_SRC)/xmu.c'
   XMU_OBJS='$(UTILS_BIN)/xmu.o'
 else
@@ -372,41 +715,48 @@ else
   XMU_OBJS=''
   SAVER_LIBS="-lXmu $SAVER_LIBS"
   HACK_LIBS="-lXmu $HACK_LIBS"
   XMU_OBJS=''
   SAVER_LIBS="-lXmu $SAVER_LIBS"
   HACK_LIBS="-lXmu $HACK_LIBS"
+  MOTIF_LIBS="-lXmu $MOTIF_LIBS"
+  GTK_LIBS="-lXmu $GTK_LIBS"
   AC_DEFINE(HAVE_XMU)
 fi
 
 
   AC_DEFINE(HAVE_XMU)
 fi
 
 
-# See comp.windows.x FAQ question 124 about _get_wmShellWidgetClass on 4.1.x.
-# The right fix is to get OpenWindows 3.0 patches 100512-02 and 100573-03.
+###############################################################################
 #
 #
-if test $have_xmu = yes ; then
+#       Check for the SunOS 4.1.x _get_wmShellWidgetClass bug.
+#       See comp.windows.x FAQ question 124.  The right fix is to
+#       get OpenWindows 3.0 patches 100512-02 and 100573-03.
+#
+###############################################################################
+
+if test "$have_xmu" = yes ; then
   case "$host" in
     *-sunos4*)
     AC_CACHE_CHECK([for the SunOS 4.1.x _get_wmShellWidgetClass bug],
   case "$host" in
     *-sunos4*)
     AC_CACHE_CHECK([for the SunOS 4.1.x _get_wmShellWidgetClass bug],
-                  ac_cv_sunos_xmu_bug,
-                  [ac_save_LDFLAGS="$LDFLAGS"
-                   if test \! -z "$x_libraries" ; then
-                     LDFLAGS="$LDFLAGS -L$x_libraries"
-                   fi
-                   # Note: this trick never works!  (Generally.)
-                   # We're only getting away with using AC_TRY_LINK
-                   # with X libraries because we know it's SunOS.
-                   LDFLAGS="$LDFLAGS -lXmu -lXt -lX11 -lXext -lm"
-                   AC_TRY_LINK(,,
-                               [ac_cv_sunos_xmu_bug=no],
-                               [ac_cv_sunos_xmu_bug=yes])
-                   LDFLAGS="$ac_save_LDFLAGS"])
-    if test $ac_cv_sunos_xmu_bug = yes ; then
+                   ac_cv_sunos_xmu_bug,
+                   [ac_save_LDFLAGS="$LDFLAGS"
+                    if test \! -z "$x_libraries" ; then
+                      LDFLAGS="$LDFLAGS -L$x_libraries"
+                    fi
+                    # Note: this trick never works!  (Generally.)
+                    # We're only getting away with using AC_TRY_LINK
+                    # with X libraries because we know it's SunOS.
+                    LDFLAGS="$LDFLAGS -lXmu -lXt -lX11 -lXext -lm"
+                    AC_TRY_LINK(,,
+                                [ac_cv_sunos_xmu_bug=no],
+                                [ac_cv_sunos_xmu_bug=yes])
+                    LDFLAGS="$ac_save_LDFLAGS"])
+    if test "$ac_cv_sunos_xmu_bug" = yes ; then
       AC_CACHE_CHECK([whether the compiler understands -static], 
       AC_CACHE_CHECK([whether the compiler understands -static], 
-                    ac_cv_ld_static,
-                    [ac_save_LDFLAGS="$LDFLAGS"
-                     LDFLAGS="$LDFLAGS -static"
-                     AC_TRY_LINK(,,[ac_cv_ld_static=yes],[ac_cv_ld_static=no])
-                   LDFLAGS="$ac_save_LDFLAGS"])
-      if test $ac_cv_ld_static = yes ; then
+                     ac_cv_ld_static,
+                     [ac_save_LDFLAGS="$LDFLAGS"
+                      LDFLAGS="$LDFLAGS -static"
+                      AC_TRY_LINK(,,[ac_cv_ld_static=yes],[ac_cv_ld_static=no])
+                    LDFLAGS="$ac_save_LDFLAGS"])
+      if test "$ac_cv_ld_static" = yes ; then
         LDFLAGS="$LDFLAGS -static"
       else
         LDFLAGS="$LDFLAGS -static"
       else
-       LDFLAGS="$LDFLAGS -Bstatic"
+        LDFLAGS="$LDFLAGS -Bstatic"
       fi
     fi
     ;;
       fi
     fi
     ;;
@@ -414,450 +764,1417 @@ if test $have_xmu = yes ; then
 fi
 
 
 fi
 
 
-# Check for the SGI SCREEN_SAVER server extension header.
+###############################################################################
+#
+#       Handle the --enable-subdir option
+#
+###############################################################################
+
+AC_ARG_ENABLE(subdir,[
+Installation options:
+
+  --enable-subdir=DIR     Put the demo programs in a subdirectory of \`bindir',
+                          instead of putting them in bindir itself.  You can
+                          specify the name of the subdirectory.  For example,
+                          \`--exec-prefix=/usr/local --enable-subdir=demos'
+                          would put xscreensaver in /usr/local/bin/, and would
+                          put the demos in /usr/local/bin/demos/.  (If DIR
+                          begins with /, then bindir will not be prepended.)
+
+  --disable-subdir        Just put the demos in \`bindir' (this is the default.)
+],
+  [enable_subdir="$enableval"],[enable_subdir=no])
+if test x"$enable_subdir" = xno; then
+  HACKDIR='${bindir}'
+elif test x"$enable_subdir" = xyes -o x"$enable_subdir" = x ; then
+  echo "error: must be a subdirectory name: --enable-subdir=$enable_subdir"
+  exit 1
+else
+  # there must be a better way than this...
+  if test -z "`echo $enable_subdir | sed 's@^/.*@@'`" ; then
+    # absolute path
+    HACKDIR=$enable_subdir
+  else
+    # relative path
+    HACKDIR='${bindir}/'$enable_subdir
+  fi
+fi
+
+# canonicalize slashes.
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+
+
+###############################################################################
+#
+#       Check for the SGI SCREEN_SAVER server extension.
 #
 #
+###############################################################################
+
 have_sgi=no
 with_sgi_req=unspecified
 have_sgi=no
 with_sgi_req=unspecified
-AC_ARG_WITH(sgi-ext,[
-Server options:
+AC_ARG_WITH(sgi-ext,
+[Except where noted, all of the --with options below can also take a
+directory argument: for example, \`--with-motif=/opt/Motif'.  That would
+cause /opt/Motif/include/ to be added to the -I list, and /opt/Motif/lib/
+to be added to the -L list, assuming those directories exist.  
+
+By default, support for each of these options will be built in, if the
+relevant library routines exist.  At run time, they will then be used
+only if the X server being used supports them.  Each --with option has
+a corresponding --without option, to override building support for them
+at all.
 
 
-  --with-sgi-ext          Include support for the SGI SCREEN_SAVER
-                          server extension, if possible (this is the default).
-  --without-sgi-ext       Do not compile in support for this extension.],
+Screen blanking and idle-detection options:
+
+  --with-sgi-ext          Include support for the SGI SCREEN_SAVER extension.],
   [with_sgi="$withval"; with_sgi_req="$withval"],[with_sgi=yes])
   [with_sgi="$withval"; with_sgi_req="$withval"],[with_sgi=yes])
-if test $with_sgi = yes; then
+
+HANDLE_X_PATH_ARG(with_sgi, --with-sgi-ext, SGI SCREEN_SAVER)
+
+if test "$with_sgi" = yes; then
   AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
   AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
-                   [have_sgi=yes
-                    AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)])
+                    [have_sgi=yes
+                     AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)])
 
 
-elif test $with_sgi != no; then
+elif test "$with_sgi" != no; then
   echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
   exit 1
 fi
 
   echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
   exit 1
 fi
 
-# Check for the MIT-SCREEN-SAVER server extension header,
-# unless the SGI extension has already been found.
+
+###############################################################################
 #
 #
+#       Check for the MIT-SCREEN-SAVER server extension.
+#
+###############################################################################
+
 have_mit=no
 with_mit_req=unspecified
 AC_ARG_WITH(mit-ext,
 have_mit=no
 with_mit_req=unspecified
 AC_ARG_WITH(mit-ext,
-[  --with-mit-ext          Include support for the MIT-SCREEN-SAVER
-                          server extension, if possible (this is the default).
-  --without-mit-ext       Do not compile in support for this extension.],
+[  --with-mit-ext          Include support for the MIT-SCREEN-SAVER extension.],
   [with_mit="$withval"; with_mit_req="$withval"],[with_mit=yes])
   [with_mit="$withval"; with_mit_req="$withval"],[with_mit=yes])
-if test $have_sgi != yes; then
-  if test $with_mit = yes; then
-    AC_CHECK_X_HEADER(X11/extensions/scrnsaver.h, [have_mit=yes])
 
 
-    # Now check to see if it's really in the library; XF86Free-3.3 ships
-    # scrnsaver.h, but doesn't include the code in libXext.a, the idiots!
-    #
-    if test $have_mit = yes; then
-      AC_CHECK_X_LIB(Xext, XScreenSaverRegister, [], [have_mit=no], -lm)
-
-      if test $have_mit = no; then
-       # Fuck!  Looks like XF86Free-3.3 actually puts it in XExExt instead
-       # of in Xext.  Thank you master, may I have another.
-        AC_CHECK_X_LIB(XExExt, XScreenSaverRegister,
-                      [have_mit=yes; SAVER_LIBS="$SAVER_LIBS -lXExExt"],
-                      [], -lX11 -lXext -lm)
-      fi
+HANDLE_X_PATH_ARG(with_mit, --with-mit-ext, MIT-SCREEN-SAVER)
 
 
-      if test $have_mit = no; then
-       # Double fuck!  Looks like some versions of XFree86 (whichever version
-       # it is that comes with RedHat Linux 2.0 -- I can't find a version 
-       # number) put this garbage in Xss instead of Xext.  Thank you master,
-       #  may I have another.
-        AC_CHECK_X_LIB(Xss, XScreenSaverRegister,
-                      [have_mit=yes; SAVER_LIBS="$SAVER_LIBS -lXss"],
-                      [], -lX11 -lXext -lm)
-      fi
+if test "$with_mit" = yes; then
+  AC_CHECK_X_HEADER(X11/extensions/scrnsaver.h, [have_mit=yes])
 
 
-    if test $have_mit = yes; then
-      AC_DEFINE(HAVE_MIT_SAVER_EXTENSION)
+  # Now check to see if it's really in the library; XF86Free-3.3 ships
+  # scrnsaver.h, but doesn't include the code in libXext.a, the idiots!
+  #
+  if test "$have_mit" = yes; then
+    AC_CHECK_X_LIB(Xext, XScreenSaverRegister, [true], [have_mit=no], -lm)
+
+    if test "$have_mit" = no; then
+      # Fuck!  Looks like XF86Free-3.3 actually puts it in XExExt instead
+      # of in Xext.  Thank you master, may I have another.
+      AC_CHECK_X_LIB(XExExt, XScreenSaverRegister,
+                     [have_mit=yes; SAVER_LIBS="$SAVER_LIBS -lXExExt"],
+                     [true], -lX11 -lXext -lm)
     fi
 
     fi
 
+    if test "$have_mit" = no; then
+      # Double fuck!  Looks like some versions of XFree86 (whichever version
+      # it is that comes with RedHat Linux 2.0 -- I can't find a version 
+      # number) put this garbage in Xss instead of Xext.  Thank you master,
+      #  may I have another.
+      AC_CHECK_X_LIB(Xss, XScreenSaverRegister,
+                     [have_mit=yes; SAVER_LIBS="$SAVER_LIBS -lXss"],
+                     [true], -lX11 -lXext -lm)
     fi
 
     fi
 
-  elif test $with_mit != no; then
-    echo "error: must be yes or no: --with-mit-ext=$with_mit"
-    exit 1
+  if test "$have_mit" = yes; then
+    AC_DEFINE(HAVE_MIT_SAVER_EXTENSION)
+  fi
+
   fi
   fi
+
+elif test "$with_mit" != no; then
+  echo "error: must be yes or no: --with-mit-ext=$with_mit"
+  exit 1
 fi
 
 
 fi
 
 
-# Check for the XIDLE server extension header.
+###############################################################################
+#
+#       Check for the XIDLE server extension.
 #
 #
+###############################################################################
+
 have_xidle=no
 with_xidle_req=unspecified
 AC_ARG_WITH(xidle-ext,
 have_xidle=no
 with_xidle_req=unspecified
 AC_ARG_WITH(xidle-ext,
-[  --with-xidle-ext        Include support for the XIDLE server extension,
-                          if possible (this is the default).
-  --without-xidle-ext     Do not compile in support for this extension.],
+[  --with-xidle-ext        Include support for the XIDLE extension.],
   [with_xidle="$withval"; with_xidle_req="$withval"],[with_xidle=yes])
   [with_xidle="$withval"; with_xidle_req="$withval"],[with_xidle=yes])
-if test $with_xidle = yes; then
+
+HANDLE_X_PATH_ARG(with_xidle, --with-xidle-ext, XIDLE)
+
+if test "$with_xidle" = yes; then
   AC_CHECK_X_HEADER(X11/extensions/xidle.h,
   AC_CHECK_X_HEADER(X11/extensions/xidle.h,
-                   [have_xidle=yes
-                    AC_DEFINE(HAVE_XIDLE_EXTENSION)])
-elif test $with_xidle != no; then
+                    [have_xidle=yes
+                     AC_DEFINE(HAVE_XIDLE_EXTENSION)])
+elif test "$with_xidle" != no; then
   echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
   exit 1
 fi
 
 
   echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
   exit 1
 fi
 
 
-# Check for the XSHM server extension header.
+###############################################################################
 #
 #
-have_xshm=no
-with_xshm_req=unspecified
-AC_ARG_WITH(xshm-ext,
-[  --with-xshm-ext         Include support for the XSHM (Shared Memory) server
-                          extension, if possible (this is the default).
-  --without-xshm-ext      Do not compile in support for this extension.],
-  [with_xshm="$withval"; with_xshm_req="$withval"],[with_xshm=yes])
-if test $with_xshm = yes; then
+#       Check for the SGI-VIDEO-CONTROL server extension.
+#
+###############################################################################
 
 
-  # first check for Xshm.h.
-  AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes])
+have_sgivc=no
+with_sgivc_req=unspecified
+AC_ARG_WITH(sgivc-ext,
+[  --with-sgivc-ext        Include support for the SGI-VIDEO-CONTROL extension.],
+  [with_sgivc="$withval"; with_sgivc_req="$withval"],[with_sgivc=yes])
 
 
-  # if that succeeded, then check for sys/ipc.h.
-  if test $have_xshm = yes; then
-    have_xshm=no
-    AC_CHECK_X_HEADER(sys/ipc.h, [have_xshm=yes])
-  fi
+HANDLE_X_PATH_ARG(with_sgivc, --with-sgivc-ext, SGI-VIDEO-CONTROL)
 
 
-  # if that succeeded, then check for sys/shm.h.
-  if test $have_xshm = yes; then
-    have_xshm=no
-    AC_CHECK_X_HEADER(sys/shm.h, [have_xshm=yes])
-  fi
+if test "$with_sgivc" = yes; then
+
+  # first check for XSGIvc.h
+  AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes])
+
+  # if that succeeded, then check for the -lXsgivc
+  if test "$have_sgivc" = yes; then
+    have_sgivc=no
+    AC_CHECK_X_LIB(Xsgivc, XSGIvcQueryGammaMap,
+                  [have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"], [true],
+                  -lXext -lX11)
+  fi
 
   # if that succeeded, then we've really got it.
 
   # if that succeeded, then we've really got it.
-  if test $have_xshm = yes; then
-    AC_DEFINE(HAVE_XSHM_EXTENSION)
+  if test "$have_sgivc" = yes; then
+    AC_DEFINE(HAVE_SGI_VC_EXTENSION)
   fi
 
   fi
 
-elif test $with_xshm != no; then
-  echo "error: must be yes or no: --with-xshm-ext=$with_xshm"
+elif test "$with_sgivc" != no; then
+  echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
   exit 1
 fi
 
 
   exit 1
 fi
 
 
-# Check for the SGI-VIDEO-CONTROL server extension header.
+###############################################################################
 #
 #
-have_sgivc=no
-with_sgivc_req=unspecified
-AC_ARG_WITH(sgivc-ext,
-[  --with-sgivc-ext        Include support for the SGI-VIDEO-CONTROL server
-                          extension, if possible (this is the default).
-  --without-sgivc-ext     Do not compile in support for this extension.],
-  [with_sgivc="$withval"; with_sgivc_req="$withval"],[with_sgivc=yes])
-if test $with_sgivc = yes; then
+#       Check for the DPMS server extension.
+#
+###############################################################################
 
 
-  # first check for XSGIvc.h
-  AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes])
+have_dpms=no
+with_dpms_req=unspecified
+AC_ARG_WITH(dpms-ext,
+[  --with-dpms-ext         Include support for the DPMS extension.],
+  [with_dpms="$withval"; with_dpms_req="$withval"],[with_dpms=yes])
 
 
-  # if that succeeded, then check for the -lXsgivc
-  if test $have_sgivc = yes; then
-    have_sgivc=no
-    AC_CHECK_X_LIB(Xsgivc, XSGIvcQueryGammaMap,
-                 [have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"], [],
-                 -lXext -lX11)
+HANDLE_X_PATH_ARG(with_dpms, --with-dpms-ext, DPMS)
+
+if test "$with_dpms" = yes; then
+
+  # first check for dpms.h
+  AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes])
+
+  # if that succeeded, then check for the -lXdpms
+  if test "$have_dpms" = yes; then
+    have_dpms=no
+    AC_CHECK_X_LIB(Xdpms, DPMSInfo,
+                  [have_dpms=yes; SAVER_LIBS="$SAVER_LIBS -lXdpms"], [true],
+                  -lXext -lX11)
   fi
 
   # if that succeeded, then we've really got it.
   fi
 
   # if that succeeded, then we've really got it.
-  if test $have_sgivc = yes; then
-    AC_DEFINE(HAVE_SGI_VC_EXTENSION)
+  if test "$have_dpms" = yes; then
+    AC_DEFINE(HAVE_DPMS_EXTENSION)
   fi
 
   fi
 
-elif test $with_sgivc != no; then
-  echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
+elif test "$with_dpms" != no; then
+  echo "error: must be yes or no: --with-dpms-ext=$with_dpms"
+  exit 1
+fi
+
+
+###############################################################################
+#
+#       Check for the XF86VMODE server extension.
+#
+###############################################################################
+
+have_xf86vmode=no
+with_xf86vmode_req=unspecified
+AC_ARG_WITH(xf86vmode-ext,
+[  --with-xf86vmode-ext    Include support for XFree86 virtual screens.],
+  [with_xf86vmode="$withval"; with_xf86vmode_req="$withval"],
+  [with_xf86vmode=yes])
+
+HANDLE_X_PATH_ARG(with_xf86vmode, --with-xf86vmode-ext, xf86vmode)
+
+if test "$with_xf86vmode" = yes; then
+
+  # first check for xf86vmode.h
+  AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86vmode=yes])
+
+  # if that succeeded, then check for the -lXxf86vm
+  if test "$have_xf86vmode" = yes; then
+    have_xf86vmode=no
+    AC_CHECK_X_LIB(Xxf86vm, XF86VidModeGetViewPort,
+                  [have_xf86vmode=yes; SAVER_LIBS="$SAVER_LIBS -lXxf86vm"],
+                   [true], -lXext -lX11)
+  fi
+
+  # if that succeeded, then we've really got it.
+  if test "$have_xf86vmode" = yes; then
+    AC_DEFINE(HAVE_XF86VMODE)
+  fi
+
+elif test "$with_xf86vmode" != no; then
+  echo "error: must be yes or no: --with-xf86vmode-ext=$with_xf86vmode"
+  exit 1
+fi
+
+
+###############################################################################
+#
+#       Check for HP XHPDisableReset and XHPEnableReset.
+#
+###############################################################################
+
+AC_EGREP_X_HEADER(XHPDisableReset, X11/XHPlib.h,
+                  [AC_DEFINE(HAVE_XHPDISABLERESET)
+                   SAVER_LIBS="-lXhp11 $SAVER_LIBS"])
+
+
+###############################################################################
+#
+#       Check for /proc/interrupts.
+#
+###############################################################################
+
+have_proc_interrupts=no
+with_proc_interrupts_req=unspecified
+AC_ARG_WITH(proc-interrupts,
+[  --with-proc-interrupts  Include support for consulting the /proc/interrupts
+                          file to notice keyboard activity.],
+  [with_proc_interrupts="$withval"; with_proc_interrupts_req="$withval"],
+  [with_proc_interrupts=yes])
+
+if test "$with_proc_interrupts" = yes; then
+
+   AC_CACHE_CHECK([whether /proc/interrupts contains keyboard data],
+    ac_cv_have_proc_interrupts,
+    [ac_cv_have_proc_interrupts=no
+     if grep keyboard /proc/interrupts >/dev/null 2>&1 ; then
+       ac_cv_have_proc_interrupts=yes
+     fi
+    ])
+   have_proc_interrupts=$ac_cv_have_proc_interrupts
+
+  if test "$have_proc_interrupts" = yes; then
+    AC_DEFINE(HAVE_PROC_INTERRUPTS)
+  fi
+
+elif test "$with_proc_interrupts" != no; then
+  echo "error: must be yes or no: --with-proc-interrupts=$with_proc_interrupts"
   exit 1
 fi
 
 
   exit 1
 fi
 
 
+###############################################################################
+#
+#       The --enable-locking option
+#
+###############################################################################
+
+AC_ARG_ENABLE(locking,[
+Screen locking options:
+
+  --enable-locking        Compile in support for locking the display.
+  --disable-locking       Do not allow locking at all.
+],
+  [enable_locking="$enableval"],[enable_locking=yes])
+if test "$enable_locking" = yes; then
+  true
+elif test "$enable_locking" = no; then
+  AC_DEFINE(NO_LOCKING)
+else
+  echo "error: must be yes or no: --enable-locking=$enable_locking"
+  exit 1
+fi
 
 
 
 
 
 
+###############################################################################
+#
+#       The --enable-vt-locking option
+#
+###############################################################################
+
+#ac_vt_lockswitch=no
+#AC_ARG_ENABLE(vt-locking,[
+#  --enable-vt-locking     Compile in support for locking Virtual Terminals.
+#                          This is the default if the system supports it, and
+#                          if locking support is included (--enable-locking.)
+#  --disable-vt-locking    Do not allow locking of VTs, even if locking is
+#                          enabled.],
+#  [enable_vt_locking="$enableval"],[enable_vt_locking=yes])
+#if test "$enable_vt_locking" = yes; then
+#
+#  AC_CACHE_CHECK([for the VT_LOCKSWITCH ioctl], ac_cv_vt_lockswitch,
+#   [AC_TRY_COMPILE([#include <fcntl.h>
+#                   #include <sys/ioctl.h>
+#                   #include <sys/vt.h>],
+#                  [int x = VT_LOCKSWITCH; int y = VT_UNLOCKSWITCH;],
+#                  [ac_cv_vt_lockswitch=yes],
+#                  [ac_cv_vt_lockswitch=no])])
+#  ac_vt_lockswitch=$ac_cv_vt_lockswitch
+#
+#elif test "$enable_vt_locking" = no; then
+#  true
+#else
+#  echo "error: must be yes or no: --enable-vt-locking=$enable_vt_locking"
+#  exit 1
+#fi
+#
+#if test "$ac_vt_lockswitch" = yes; then
+#  AC_DEFINE(HAVE_VT_LOCKSWITCH)
+#  # the VT_LOCKSWITCH ioctl can only be used when running as root.
+#  # #### but it doesn't work yet, so don't worry about that for now.
+##  need_setuid=yes
+#fi
 
 
 
 
 
 
-# Check for Motif and Athena --with and --without arguments.
+###############################################################################
+#
+#       Check for PAM.
 #
 #
+###############################################################################
+
+case "$host" in
+  *-solaris*)
+   # Solaris systems tend to come with PAM misconfigured.
+   #  Don't build it by default, even if the headers exist.
+   with_pam_default=no
+   ;;
+  *)
+   # Default to building PAM support on all other systems, if it exists.
+   with_pam_default=yes
+  ;;
+esac
+
+have_pam=no
+with_pam_req=unspecified
+
+AC_ARG_WITH(pam,
+[  --with-pam              Include support for PAM (Pluggable Auth Modules.)],
+  [with_pam="$withval"; with_pam_req="$withval"],[with_pam=$with_pam_default])
+
+HANDLE_X_PATH_ARG(with_pam, --with-pam, PAM)
+
+if test "$enable_locking" = yes -a "$with_pam" = yes; then
+  AC_CACHE_CHECK([for PAM], ac_cv_pam,
+                 [AC_TRY_X_COMPILE([#include <security/pam_appl.h>],,
+                                   [ac_cv_pam=yes],
+                                   [ac_cv_pam=no])])
+  if test "$ac_cv_pam" = yes ; then
+    have_pam=yes
+    AC_DEFINE(HAVE_PAM)
+    PASSWD_LIBS="${PASSWD_LIBS} -lpam"
+
+    # libpam typically requires dlopen and dlsym.  On FreeBSD,
+    # those are in libc.  On Linux and Solaris, they're in libdl.
+    AC_CHECK_LIB(dl, dlopen, [PASSWD_LIBS="${PASSWD_LIBS} -ldl"])
+
+    AC_MSG_CHECKING(how to call pam_strerror)
+    AC_CACHE_VAL(ac_cv_pam_strerror_args,
+     [AC_TRY_COMPILE([#include <stdio.h>
+                      #include <stdlib.h>
+                      #include <security/pam_appl.h>],
+                     [pam_handle_t *pamh = 0;
+                      char *s = pam_strerror(pamh, PAM_SUCCESS);],
+                     [ac_pam_strerror_args=2],
+                     [AC_TRY_COMPILE([#include <stdio.h>
+                                      #include <stdlib.h>
+                                      #include <security/pam_appl.h>],
+                                     [char *s =
+                                       pam_strerror(PAM_SUCCESS);],
+                                     [ac_pam_strerror_args=1],
+                                     [ac_pam_strerror_args=0])])
+      ac_cv_pam_strerror_args=$ac_pam_strerror_args])
+    ac_pam_strerror_args=$ac_cv_pam_strerror_args
+    if test "$ac_pam_strerror_args" = 1 ; then
+      AC_MSG_RESULT(one argument)
+    elif test "$ac_pam_strerror_args" = 2 ; then
+      AC_DEFINE(PAM_STRERROR_TWO_ARGS)
+      AC_MSG_RESULT(two arguments)
+    else
+      AC_MSG_RESULT(unknown)
+    fi
+  fi
+fi
+
+
+###############################################################################
+#
+#       Check for Kerberos.
+#
+###############################################################################
+
+have_kerberos=no
+with_kerberos_req=unspecified
+
+AC_ARG_WITH(kerberos, 
+[  --with-kerberos         Include support for Kerberos authentication.],
+  [with_kerberos="$withval"; with_kerberos_req="$withval"],[with_kerberos=yes])
+
+HANDLE_X_PATH_ARG(with_kerberos, --with-kerberos, Kerberos)
+
+if test "$enable_locking" = yes -a "$with_kerberos" = yes; then
+  AC_CACHE_CHECK([for Kerberos], ac_cv_kerberos,
+                 [AC_TRY_X_COMPILE([#include <krb.h>],,
+                                   [ac_cv_kerberos=yes],
+                                   [ac_cv_kerberos=no])])
+  if test "$ac_cv_kerberos" = yes ; then
+    have_kerberos=yes
+    AC_DEFINE(HAVE_KERBEROS)
+
+    # from Tim Showalter <tjs+@andrew.cmu.edu>
+    PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes"
+    AC_CHECK_FUNC(res_search,,
+      AC_CHECK_LIB(resolv,res_search,PASSWD_LIBS="${PASSWD_LIBS} -lresolv",
+        AC_MSG_WARN([Can't find DNS resolver libraries needed for Kerberos])
+      ))
+
+  fi
+fi
+
+
+###############################################################################
+#
+#       Check for the nine billion variants of shadow passwords...
+#
+###############################################################################
+
+need_setuid=no
+
+have_shadow=no
+with_shadow_req=unspecified
+
+AC_ARG_WITH(shadow,
+[  --with-shadow           Include support for shadow password authentication.],
+  [with_shadow="$withval"; with_shadow_req="$withval"],[with_shadow=yes])
+
+HANDLE_X_PATH_ARG(with_shadow, --with-shadow, shadow password)
+
+if test "$enable_locking" = no ; then
+  with_shadow_req=no
+  with_shadow=no
+fi
+
+
+###############################################################################
+#
+#       Check for Sun "adjunct" passwords.
+#
+###############################################################################
+
+if test "$with_shadow" = yes ; then
+  AC_CACHE_CHECK([for Sun-style shadow passwords], ac_cv_sun_adjunct,
+                 [AC_TRY_X_COMPILE([#include <stdlib.h>
+                                    #include <unistd.h>
+                                    #include <sys/types.h>
+                                    #include <sys/label.h>
+                                    #include <sys/audit.h>
+                                    #include <pwdadj.h>],
+                      [struct passwd_adjunct *p = getpwanam("nobody");
+                       const char *pw = p->pwa_passwd;],
+                      [ac_cv_sun_adjunct=yes],
+                      [ac_cv_sun_adjunct=no])])
+  if test "$ac_cv_sun_adjunct" = yes; then
+    have_shadow_adjunct=yes
+    have_shadow=yes
+    need_setuid=yes
+  fi
+fi
+
+
+###############################################################################
+#
+#       Check for DEC and SCO so-called "enhanced" security.
+#
+###############################################################################
+
+if test "$with_shadow" = yes ; then
+  AC_CACHE_CHECK([for DEC-style shadow passwords], ac_cv_enhanced_passwd,
+                 [AC_TRY_X_COMPILE([#include <stdlib.h>
+                                    #include <unistd.h>
+                                    #include <sys/types.h>
+                                    #include <pwd.h>
+                                    #include <sys/security.h>
+                                    #include <prot.h>],
+                      [struct pr_passwd *p;
+                       const char *pw;
+                       set_auth_parameters(0, 0);
+                       check_auth_parameters();
+                       p = getprpwnam("nobody");
+                       pw = p->ufld.fd_encrypt;],
+                      [ac_cv_enhanced_passwd=yes],
+                      [ac_cv_enhanced_passwd=no])])
+  if test $ac_cv_enhanced_passwd = yes; then
+    have_shadow_enhanced=yes
+    have_shadow=yes
+    need_setuid=yes
+
+    # On SCO, getprpwnam() is in -lprot (which uses nap() from -lx)
+    # (I'm told it needs -lcurses too, but I don't understand why.)
+    # But on DEC, it's in -lsecurity.
+    #
+    AC_CHECK_LIB(prot, getprpwnam, 
+                 [PASSWD_LIBS="$PASSWD_LIBS -lprot -lcurses -lx"],
+                 [AC_CHECK_LIB(security, getprpwnam, 
+                               [PASSWD_LIBS="$PASSWD_LIBS -lsecurity"])],
+                 [-lx])
+  fi
+fi
+
+###############################################################################
+#
+#       Check for HP's entry in the "Not Invented Here" Sweepstakes.
+#
+###############################################################################
+
+if test "$with_shadow" = yes ; then
+  AC_CACHE_CHECK([for HP-style shadow passwords], ac_cv_hpux_passwd,
+                 [AC_TRY_X_COMPILE([#include <stdlib.h>
+                                    #include <unistd.h>
+                                    #include <sys/types.h>
+                                    #include <pwd.h>
+                                    #include <hpsecurity.h>
+                                    #include <prot.h>],
+                      [struct s_passwd *p = getspwnam("nobody");
+                       const char *pw = p->pw_passwd;],
+                      [ac_cv_hpux_passwd=yes],
+                      [ac_cv_hpux_passwd=no])])
+  if test "$ac_cv_hpux_passwd" = yes; then
+    have_shadow_hpux=yes
+    have_shadow=yes
+    need_setuid=yes
+
+    # on HPUX, bigcrypt is in -lsec
+    AC_CHECK_LIB(sec, bigcrypt, [PASSWD_LIBS="$PASSWD_LIBS -lsec"])
+  fi
+fi
+
+
+###############################################################################
+#
+#       Check for FreeBSD-style shadow passwords.
+#
+#       On FreeBSD, getpwnam() and friends work just like on non-shadow-
+#       password systems -- except you only get stuff in the pw_passwd field
+#       if the running program is setuid.  So, guess that we've got this
+#       lossage to contend with if /etc/master.passwd exists, and default to
+#       a setuid installation.
+#
+###############################################################################
+
+if test "$with_shadow" = yes ; then
+  AC_CACHE_CHECK([for FreeBSD-style shadow passwords], ac_cv_master_passwd,
+                 [if test -f /etc/master.passwd ; then
+                    ac_cv_master_passwd=yes
+                  else
+                    ac_cv_master_passwd=no
+                  fi])
+  if test "$ac_cv_master_passwd" = yes; then
+    need_setuid=yes
+  fi
+fi
+
+
+###############################################################################
+#
+#       Check for traditional (ha!) shadow passwords.
+#
+###############################################################################
+
+if test "$with_shadow" = yes ; then
+  AC_CACHE_CHECK([for generic shadow passwords], ac_cv_shadow,
+                 [AC_TRY_X_COMPILE([#include <stdlib.h>
+                                    #include <unistd.h>
+                                    #include <sys/types.h>
+                                    #include <pwd.h>
+                                    #include <shadow.h>],
+                      [struct spwd *p = getspnam("nobody");
+                       const char *pw = p->sp_pwdp;],
+                      [ac_cv_shadow=yes],
+                      [ac_cv_shadow=no])])
+  if test "$ac_cv_shadow" = yes; then
+    have_shadow=yes
+    need_setuid=yes
+
+    # On some systems (UnixWare 2.1), getspnam() is in -lgen instead of -lc.
+    have_getspnam=no
+    AC_CHECK_LIB(c, getspnam, [have_getspnam=yes])
+    if test "$have_getspnam" = no ; then
+      AC_CHECK_LIB(gen, getspnam,
+                   [have_getspnam=yes; PASSWD_LIBS="$PASSWD_LIBS -lgen"])
+    fi
+  fi
+fi
+
+
+###############################################################################
+#
+#       Check for other libraries needed for non-shadow passwords.
+#
+###############################################################################
+
+if test "$enable_locking" = yes ; then
+
+  # On some systems (UnixWare 2.1), crypt() is in -lcrypt instead of -lc.
+  have_crypt=no
+  AC_CHECK_LIB(c, crypt, [have_crypt=yes])
+  if test "$have_crypt" = no ; then
+    AC_CHECK_LIB(crypt, crypt,
+                 [have_crypt=yes; PASSWD_LIBS="$PASSWD_LIBS -lcrypt"])
+  fi
+fi
+
+
+# Most of the above shadow mechanisms will have set need_setuid to yes,
+# if they were found.  But, on some systems, we need setuid even when
+# using plain old vanilla passwords.
+#
+if test "$enable_locking" = yes ; then
+  case "$host" in
+    *-hpux* | *-aix* | *-netbsd* | *-freebsd* | *-openbsd* )
+      need_setuid=yes
+    ;;
+  esac
+fi
+
+
+if test "$have_shadow_adjunct" = yes ; then
+  AC_DEFINE(HAVE_ADJUNCT_PASSWD)
+elif test "$have_shadow_enhanced" = yes ; then
+  AC_DEFINE(HAVE_ENHANCED_PASSWD)
+elif test "$have_shadow_hpux" = yes ; then
+  AC_DEFINE(HAVE_HPUX_PASSWD)
+elif test "$have_shadow" = yes ; then
+  AC_DEFINE(HAVE_SHADOW_PASSWD)
+fi
+
+
+###############################################################################
+#
+#       Check for -lXm.
+#
+###############################################################################
+
 have_motif=no
 have_motif=no
-have_athena=no
 with_motif_req=unspecified
 with_motif_req=unspecified
-with_athena_req=unspecified
-
 AC_ARG_WITH(motif,[
 AC_ARG_WITH(motif,[
-Toolkit options:
+User interface options:
 
 
-  --with-motif            Use the Motif toolkit for the user interface,
-                          if possible (this is the default).
-  --without-motif         Do not use Motif.],
-  [with_motif="$withval"; with_motif_req="$withval"],[with_motif=no])
+  --with-motif            Use the Motif toolkit for the user interface.],
+  [with_motif="$withval"; with_motif_req="$withval"],[with_motif=yes])
 
 
-AC_ARG_WITH(athena,
-[  --with-athena           Use the Athena toolkit for the user interface, if
-                          possible (this is the default if Motif isn't used.)
-  --without-athena        Do not use Athena.],
-  [with_athena="$withval"; with_athena_req="$withval"],[with_athena=no])
+HANDLE_X_PATH_ARG(with_motif, --with-motif, Motif)
 
 
-if test $with_motif != yes -a $with_motif != no ; then
+if test "$with_motif" != yes -a "$with_motif" != no ; then
   echo "error: must be yes or no: --with-motif=$with_motif"
   exit 1
 fi
 
   echo "error: must be yes or no: --with-motif=$with_motif"
   exit 1
 fi
 
-if test $with_athena != yes -a $with_athena != no ; then
-  echo "error: must be yes or no: --with-athena=$with_athena"
+if test "$with_motif" = yes; then
+  have_motif=no
+  AC_CHECK_X_HEADER(Xm/Xm.h,
+                    [have_motif=yes
+                     AC_DEFINE(HAVE_MOTIF)
+                     MOTIF_LIBS="$MOTIF_LIBS -lXm"])
+fi
+
+
+if test "$have_motif" = yes; then
+  AC_CHECK_X_HEADER(Xm/ComboBox.h, [AC_DEFINE(HAVE_XMCOMBOBOX)])
+fi
+
+
+###############################################################################
+#
+#       Check for -lgtk.
+#
+###############################################################################
+
+have_gtk=no
+with_gtk_req=unspecified
+AC_ARG_WITH(gtk,
+[  --with-gtk              Use the Gtk toolkit for the user interface.],
+  [with_gtk="$withval"; with_gtk_req="$withval"],[with_gtk=yes])
+
+# if --with-gtk=/directory/ was specified, remember that directory so that
+# we can also look for the `gtk-config' program in that directory.
+case "$with_gtk" in
+  /*)
+    gtk_dir="$with_gtk"
+    ;;
+  *)
+    gtk_dir=""
+    ;;
+esac
+
+HANDLE_X_PATH_ARG(with_gtk, --with-gtk, Gtk)
+
+if test "$with_gtk" != yes -a "$with_gtk" != no ; then
+  echo "error: must be yes or no: --with-gtk=$with_gtk"
   exit 1
 fi
 
   exit 1
 fi
 
+jurassic_gtk=no
+if test "$with_gtk" = yes; then
+  have_gtk=no
+  
+  # if the user specified --with-gtk=/foo/ then look in /foo/bin/
+  # for glib-config and gtk-config.
+  #
+  gtk_path="$PATH"
+
+  if test ! -z "$gtk_dir"; then
+    # canonicalize slashes.
+    gtk_dir=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
+    gtk_path="$gtk_dir:$gtk_dir:$gtk_path"
+  fi
 
 
-# Saying --without-motif is the same as saying --with-athena.
-if test $with_motif_req = no ; then
-  with_athena_req=yes
-  with_athena=yes
+  AC_PATH_PROGS(glib_config, glib-config,, $gtk_path)
+  AC_PATH_PROGS(gtk_config,  gtk-config,,  $gtk_path)
+
+  if test -n "$glib_config" -a  -n "gtk_config" ; then
+    have_gtk=yes
+  fi
+  if test "$have_gtk" = yes; then
+    AC_CACHE_CHECK([Gtk version number], ac_cv_gtk_version_string,
+                   [ac_cv_gtk_version_string=`$glib_config --version`])
+    ac_gtk_version_string=$ac_cv_gtk_version_string
+    # M4 sucks!!
+    changequote(X,Y)
+    maj=`echo $ac_gtk_version_string | sed -n 's/\..*//p'`
+    min=`echo $ac_gtk_version_string | sed -n 's/[^.]*\.\([^.]*\).*/\1/p'`
+    changequote([,])
+    ac_gtk_version=`echo "$maj * 1000 + $min" | bc`
+    if test -z "$ac_gtk_version"; then
+      ac_gtk_version=unknown
+      ac_gtk_version_string=unknown
+    fi
+    if test "$ac_gtk_version" = "unknown" || test "$ac_gtk_version" -lt 1002
+    then
+      have_gtk=no
+      jurassic_gtk=yes
+    fi
+  fi
+  if test "$have_gtk" = yes; then
+    AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
+                   [ac_cv_gtk_config_cflags=`$gtk_config --cflags`])
+    AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
+                   [ac_cv_gtk_config_libs=`$gtk_config --libs`])
+    INCLUDES="$INCLUDES $ac_cv_gtk_config_cflags"
+    GTK_LIBS="$GTK_LIBS $ac_cv_gtk_config_libs"
+    AC_DEFINE(HAVE_GTK)
+  fi
 fi
 
 fi
 
-# Saying --without-athena is the same as saying --with-motif.
-if test $with_athena_req = no ; then
-  with_motif_req=yes
-  with_motif=yes
+
+###############################################################################
+#
+#       Checking whether Motif is really Lesstif.
+#
+###############################################################################
+
+have_lesstif=no
+if test "$have_motif" = yes ; then
+  AC_CACHE_CHECK([whether Motif is really LessTif], 
+                 ac_cv_have_lesstif,
+                 [AC_TRY_X_COMPILE([#include <Xm/Xm.h>],
+                                   [long vers = LesstifVersion;],
+                                   [ac_cv_have_lesstif=yes],
+                                   [ac_cv_have_lesstif=no])])
+  have_lesstif=$ac_cv_have_lesstif
 fi
 
 fi
 
-# Check for Motif and Athena headers.
 
 
-check_motif() {
-  AC_CHECK_X_HEADER(Xm/Xm.h,
-                   [have_motif=yes
-                    AC_DEFINE(HAVE_MOTIF)
-                    SAVER_LIBS="-lXm $SAVER_LIBS"])
-}
+lesstif_version=unknown
+lesstif_version_string=unknown
+
+if test "$have_lesstif" = yes ; then
+  ltv=unknown
+  echo unknown > conftest-lt
+  AC_CACHE_CHECK([LessTif version number],
+                 ac_cv_lesstif_version_string,
+      [AC_TRY_X_RUN([#include <stdio.h>
+                     #include <Xm/Xm.h>
+                     int main() {
+                       FILE *f = fopen("conftest-lt", "w");
+                       if (!f) exit(1);
+                       fprintf(f, "%d %d.%d\n", LesstifVersion,
+                          LESSTIF_VERSION, LESSTIF_REVISION);
+                       fclose(f);
+                       exit(0);
+                     }],
+                    [ltv=`cat conftest-lt`
+                     ac_cv_lesstif_version=`echo $ltv | sed 's/ .*//'`
+                     ac_cv_lesstif_version_string=`echo $ltv | sed 's/.* //'`],
+                    [ac_cv_lesstif_version=unknown
+                     ac_cv_lesstif_version_string=unknown],
+                    [ac_cv_lesstif_version=unknown
+                     ac_cv_lesstif_version_string=unknown])])
+  rm -f conftest-lt
+  lesstif_version=$ac_cv_lesstif_version
+  lesstif_version_string=$ac_cv_lesstif_version_string
 
 
-check_athena() {
-  AC_CHECK_X_HEADER(X11/Xaw/Dialog.h,
-                  [have_athena=yes
-                   AC_DEFINE(HAVE_ATHENA)
-                   SAVER_LIBS="-lXaw $SAVER_LIBS"])
-}
+fi
 
 
 
 
-# If they asked for both motif and athena, check motif then athena.
-# If they asked for only motif, check motif then athena.
-# If they asked for only athena, check athena then motif.
-# If they asked for neither, check motif then athena.
+if test "$have_motif" = yes ; then
+  mtv=unknown
+  echo unknown > conftest-mt
+  AC_CACHE_CHECK([Motif version number],
+                 ac_cv_motif_version_string,
+      [AC_TRY_X_RUN([#include <stdio.h>
+                     #include <Xm/Xm.h>
+                     int main() {
+                       FILE *f = fopen("conftest-mt", "w");
+                       if (!f) exit(1);
+                       fprintf(f, "%d %d.%d\n", XmVersion,
+                          XmVERSION, XmREVISION);
+                       fclose(f);
+                       exit(0);
+                     }],
+                    [mtv=`cat conftest-mt`
+                     ac_cv_motif_version=`echo $mtv | sed 's/ .*//'`
+                     ac_cv_motif_version_string=`echo $mtv | sed 's/.* //'`],
+                    [ac_cv_motif_version=unknown
+                     ac_cv_motif_version_string=unknown],
+                    [ac_cv_motif_version=unknown
+                     ac_cv_motif_version_string=unknown])])
+  rm -f conftest-mt
+  motif_version=$ac_cv_motif_version
+  motif_version_string=$ac_cv_motif_version_string
 
 
-proselytize_motif=yes
-if test $with_motif = yes; then
-  # asked for both, or for motif only
-  check_motif
-  if test $have_motif = yes; then
-    with_athena=no
-    with_athena_req=no
-  else
-    check_athena
+fi
+
+
+###############################################################################
+#
+#       Checking whether Motif requires -lXpm.
+#
+#       If this is Motif 2.x, and we have XPM, then link against XPM as well.
+#       The deal is, Motif 2.x requires XPM -- but it's a compilation option
+#       of the library whether to build the XPM code into libXm, or whether
+#       to rely on an external libXm.  So the only way to tell whether XPM is
+#       a link-time requirement is to examine libXm.a, which is very
+#       difficult to do in an autoconf script.  So... if it's Motif 2.x, we
+#       always link against XPM if the XPM lib exists (and this will be a
+#       no-op if libXm happens to already have the XPM code in it.)
+#
+###############################################################################
+
+motif_requires_xpm=no
+if test "$have_motif" = yes ; then
+   AC_MSG_CHECKING(whether Motif requires XPM)
+   if test "$motif_version" = "unknown" || test "$motif_version" -ge 2000
+   then
+     motif_requires_xpm=yes
+     AC_MSG_RESULT(maybe)
+   else
+     AC_MSG_RESULT(no)
+   fi
+fi
+
+
+###############################################################################
+#
+#       Checking whether Motif requires -lXp.
+#
+#       Some versions of Motif (2.1.0, at least) require -lXp, the "X Printing
+#       Extension".   Why this extension isn't in -lXext with all the others,
+#       I have no idea.
+#
+###############################################################################
+
+have_xp_ext=no
+if test "$have_motif" = yes ; then
+   have_xp_ext=no
+   AC_CHECK_X_LIB(Xp, XpQueryExtension,
+                  [have_xp_ext=yes; MOTIF_LIBS="$MOTIF_LIBS -lXp"],
+                  [true], -lX11 -lXext -lm)
+fi
+
+
+###############################################################################
+#
+#       Checking whether Motif requires -lXintl (for _Xsetlocale.)
+#
+###############################################################################
+
+have_xintl=no
+if test "$have_motif" = yes ; then
+  AC_CHECK_X_LIB(Xintl, _Xsetlocale, [have_xintl=yes], [have_xintl=no],
+                 -lX11 -lXext -lm)
+  if test "$have_xintl" = yes; then
+    MOTIF_LIBS="$MOTIF_LIBS -lXintl"
   fi
   fi
+fi
 
 
-elif test $with_athena = yes; then
-  # asked for athena only
-  check_athena
-  if test $have_athena = yes; then
-    with_motif=no
-    proselytize_motif=no
-  else
-    check_motif
+
+###############################################################################
+#
+#       Check for -lGL or -lMesaGL.
+#
+###############################################################################
+
+have_gl=no
+ac_have_mesa_gl=no
+with_gl_req=unspecified
+gl_halfassed=no
+AC_ARG_WITH(gl,[
+Graphics options:
+
+  --with-gl               Build those demos which depend on OpenGL.],
+  [with_gl="$withval"; with_gl_req="$withval"],[with_gl=yes])
+
+HANDLE_X_PATH_ARG(with_gl, --with-gl, GL)
+
+ac_mesagl_version=unknown
+ac_mesagl_version_string=unknown
+
+if test "$with_gl" = yes; then
+  AC_CHECK_X_HEADER(GL/gl.h, have_gl=yes, have_gl=no)
+  if test "$have_gl" = yes ; then
+    AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no)
   fi
 
   fi
 
-else
-  # asked for neither
-  check_motif
-  if test $have_motif = yes; then
-    with_athena=no
-  else
-    check_athena
+  # If we have the headers, try and figure out which vendor it's from.
+  #
+  if test "$have_gl" = yes ; then
+
+    # We need to know whether it's MesaGL so that we know which libraries
+    # to link against.
+    #
+    AC_CACHE_CHECK([whether GL is really MesaGL], ac_cv_have_mesa_gl,
+      [ac_cv_have_mesa_gl=no
+       AC_EGREP_X_HEADER(Mesa, GL/glx.h, [ac_cv_have_mesa_gl=yes])
+      ])
+    ac_have_mesa_gl=$ac_cv_have_mesa_gl
+
+    gl_lib_1=""
+    GL_LIBS=""
+
+
+    # Some versions of MesaGL are compiled to require -lpthread.
+    # So if the Mesa headers exist, and -lpthread exists, then always
+    # link -lpthread after the Mesa libs (be they named -lGL or -lMesaGL.)
+    #
+    if test "$ac_have_mesa_gl" = yes; then
+      AC_CHECK_LIB(pthread, pthread_create, [GL_LIBS="-lpthread"], [],)
+    fi
+
+
+    # If we have Mesa headers, check to see if we can link against -lMesaGL.
+    # If we don't have Mesa headers, or we don't have -lMesaGL, try -lGL.
+    # Else, warn that GL is busted.  (We have the headers, but no libs.)
+    #
+
+    if test "$ac_have_mesa_gl" = yes ; then
+      AC_CHECK_X_LIB(MesaGL, glXCreateContext, 
+                     [gl_lib_1="MesaGL"
+                      GL_LIBS="-lMesaGL -lMesaGLU $GL_LIBS"],
+                     [], -lMesaGLU $GL_LIBS -lX11 -lXext -lm)
+    fi
+
+    if test "$gl_lib_1" = "" ; then
+      AC_CHECK_X_LIB(GL, glXCreateContext, 
+                     [gl_lib_1="GL"
+                      GL_LIBS="-lGL -lGLU $GL_LIBS"],
+                     [], -lGLU $GL_LIBS -lX11 -lXext -lm)
+    fi
+
+    if test "$gl_lib_1" = "" ; then
+      # we have headers, but no libs -- bail.
+      have_gl=no
+      ac_have_mesa_gl=no
+      gl_halfassed=yes
+    else
+      # linking works -- we can build the GL hacks.
+      AC_DEFINE(HAVE_GL)
+      if test "$ac_have_mesa_gl" = yes ; then
+        AC_DEFINE(HAVE_MESA_GL)
+      fi
+    fi
   fi
 
   fi
 
-fi
 
 
-if test $have_motif = yes; then
-  proselytize_motif=no
+  # Now that we know we have GL headers and libs, do some more GL testing.
+  #
+
+  if test "$have_gl" = yes ; then
+    # If it's MesaGL, we'd like to issue a warning if the version number
+    # is less than or equal to 2.6, because that version had a security bug.
+    #
+    if test "$ac_have_mesa_gl" = yes; then
+
+      AC_CACHE_CHECK([MesaGL version number], ac_cv_mesagl_version_string,
+        [cat > conftest.$ac_ext <<EOF
+#line __oline__ "configure"
+#include "confdefs.h"
+#include <GL/gl.h>
+configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
+EOF
+
+         ac_save_CPPFLAGS="$CPPFLAGS"
+         if test \! -z "$includedir" ; then 
+           CPPFLAGS="$CPPFLAGS -I$includedir"
+         fi
+         CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
+          # M4 sucks!!
+         changequote(X,Y)
+         mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC | sed -n \
+              's/^configure:.*\([0-9][0-9]*\).*\([0-9][0-9]*\).*$/\1.\2/p'`
+         changequote([,])
+
+         rm -f conftest.$ac_ext
+
+         CPPFLAGS="$ac_save_CPPFLAGS"
+
+         if test "$mglv" = ""; then
+           ac_mesagl_version=unknown
+           ac_mesagl_version_string=unknown
+         else
+           ac_mesagl_version_string=$mglv
+           maj=`echo $mglv | sed -n 's/\..*//p'`
+           min=`echo $mglv | sed -n 's/.*\.//p'`
+           ac_mesagl_version=`echo "$maj * 1000 + $min" | bc`
+           if test -z "$ac_mesagl_version"; then
+             ac_mesagl_version=unknown
+             ac_mesagl_version_string=unknown
+           fi
+         fi
+         ac_cv_mesagl_version=$ac_mesagl_version
+         ac_cv_mesagl_version_string=$ac_mesagl_version_string
+      ])
+      ac_mesagl_version=$ac_cv_mesagl_version
+      ac_mesagl_version_string=$ac_cv_mesagl_version_string
+    fi
+
+
+    # Check for OpenGL 1.1 features.
+    #
+    AC_CHECK_X_LIB($gl_lib_1, glBindTexture, [AC_DEFINE(HAVE_GLBINDTEXTURE)],
+                   [true], $GL_LIBS -lX11 -lXext -lm)
+
+
+    # Check whether the `xscreensaver' executable should link against GL.
+    # See comments in utils/visual-gl.c for why this is sometimes necessary.
+    #
+    AC_MSG_CHECKING(whether drastic GL measures must be taken)
+    case "$host" in
+      *-sgi*)
+        AC_MSG_RESULT([yes -- hello, SGI.])
+        AC_DEFINE(DAEMON_USE_GL)
+        SAVER_GL_SRCS='$(UTILS_SRC)/visual-gl.c'
+        SAVER_GL_OBJS='$(UTILS_BIN)/visual-gl.o'
+        SAVER_GL_LIBS="$GL_LIBS"
+      ;;
+      *)
+        AC_MSG_RESULT([no -- non-SGI.])
+        SAVER_GL_SRCS=''
+        SAVER_GL_OBJS=''
+        SAVER_GL_LIBS=''
+      ;;
+    esac
+
+  fi
+
+elif test "$with_gl" != no; then
+  echo "error: must be yes or no: --with-gl=$with_gl"
+  exit 1
+fi
+
+
+###############################################################################
+#
+#       Check for -lgle.
+#
+###############################################################################
+
+have_gle=no
+with_gle_req=unspecified
+gle_halfassed=no
+AC_ARG_WITH(gle,
+[  --with-gle              Build those demos which depend on GLE
+                          (the OpenGL "extrusion" library.)],
+  [with_gle="$withval"; with_gle_req="$withval"],[with_gle=yes])
+
+HANDLE_X_PATH_ARG(with_gle, --with-gle, GLE)
+
+GLE_LIBS=""
+
+if test "$with_gle" = yes; then
+
+  AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no)
+  if test "$have_gle" = yes ; then
+    AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no)
+  fi
+
+  if test "$have_gle" = yes ; then
+    have_gle=no
+    gle_halfassed=yes
+    AC_CHECK_X_LIB(gle, gleCreateGC, 
+                   [have_gle=yes; gle_halfassed=no; GLE_LIBS="-lgle"],
+                   [], $GL_LIBS -lX11 -lXext -lm)
+  fi
+  if test "$have_gle" = yes ; then
+    have_gle=no
+    gle_halfassed=yes
+
+    # sometimes the libmatrix stuff is included in libgle.  look there first.
+#
+# I don't get it.  For some reason, this test passes on SGI, as if
+# uview_direction_d() was in libgle -- but it's not, it's in libmatrix.
+# Yet the link is succeeding.  Why???
+#
+#    AC_CHECK_X_LIB(gle, uview_direction_d, 
+#                   [have_gle=yes; gle_halfassed=no],
+#                   [], $GL_LIBS -lX11 -lXext -lm)
+
+    # if it wasn't in libgle, then look in libmatrix.
+    if test "$have_gle" = no ; then
+      AC_CHECK_X_LIB(matrix, uview_direction_d, 
+                     [have_gle=yes; gle_halfassed=no;
+                      GLE_LIBS="$GLE_LIBS -lmatrix"],
+                    [], $GL_LIBS -lX11 -lXext -lm)
+    fi
+  fi
+
+  if test "$have_gle" = yes ; then
+    AC_DEFINE(HAVE_GLE)
+  fi
+
+elif test "$with_gle" != no; then
+  echo "error: must be yes or no: --with-gle=$with_gle"
+  exit 1
+
+fi
+
+
+
+###############################################################################
+#
+#       Check for -lXpm.
+#
+###############################################################################
+
+have_xpm=no
+with_xpm_req=unspecified
+AC_ARG_WITH(xpm,
+[  --with-xpm              Include support for XPM files in some demos.],
+  [with_xpm="$withval"; with_xpm_req="$withval"],[with_xpm=yes])
+
+HANDLE_X_PATH_ARG(with_xpm, --with-xpm, XPM)
+
+if test "$with_xpm" = yes; then
+  AC_CHECK_X_HEADER(X11/xpm.h,
+                   [have_xpm=yes
+                    AC_DEFINE(HAVE_XPM)
+                    XPM_LIBS="-lXpm"])
+elif test "$with_xpm" != no; then
+  echo "error: must be yes or no: --with-xpm=$with_xpm"
+  exit 1
 fi
 
 fi
 
-# If we have Athena, check whether it's a version that includes
-# XawViewportSetCoordinates in Viewport.h (R3 (or R4?) don't.)
-if test $have_athena = yes ; then
-  AC_CACHE_CHECK([for XawViewportSetCoordinates in Viewport.h], 
-                ac_cv_have_XawViewportSetCoordinates,
-                [ac_cv_have_XawViewportSetCoordinates=no
-                 AC_EGREP_X_HEADER(XawViewportSetCoordinates, 
-                                   X11/Xaw/Viewport.h,
-                                   ac_cv_have_XawViewportSetCoordinates=yes)])
-  if test $ac_cv_have_XawViewportSetCoordinates = yes ; then
-    AC_DEFINE(HAVE_XawViewportSetCoordinates)
+# See comment near $motif_requires_xpm, above.
+# Need to do this here, after both Motif and XPM have been checked for.
+#
+if test "$have_motif" = yes -a "$have_xpm" = yes ; then
+  if test "$motif_requires_xpm" = yes ; then
+    MOTIF_LIBS="$MOTIF_LIBS $XPM_LIBS"
   fi
 fi
 
 
   fi
 fi
 
 
-# If we have Motif, check whether it's really LessTif.
+###############################################################################
 #
 #
-have_lesstif=no
-if test $have_motif = yes ; then
-  AC_CACHE_CHECK([whether Motif is really LessTif], 
-                ac_cv_have_lesstif,
-                [AC_TRY_X_COMPILE([#include <Xm/Xm.h>],
-                                  [long vers = LesstifVersion;],
-                                  [ac_cv_have_lesstif=yes],
-                                  [ac_cv_have_lesstif=no])])
-  have_lesstif=$ac_cv_have_lesstif
-fi
+#       Check for the XSHM server extension.
+#
+###############################################################################
+
+have_xshm=no
+with_xshm_req=unspecified
+AC_ARG_WITH(xshm-ext,
+[  --with-xshm-ext         Include support for the XSHM extension.],
+  [with_xshm="$withval"; with_xshm_req="$withval"],[with_xshm=yes])
 
 
-# don't cache this
-unset ac_cv_good_lesstif
+HANDLE_X_PATH_ARG(with_xshm, --with-xshm-ext, XSHM)
 
 
-good_lesstif=no
-if test $have_lesstif = yes ; then
-  # It must be at least "GNU Lesstif 0.82".
-  # #### If you change this, also sync the warning message lower down.
-  AC_CACHE_CHECK([whether LessTif is of a recent enough vintage],
-                ac_cv_good_lesstif,
-                [AC_TRY_X_RUN([#include <Xm/Xm.h>
-                               int main() { exit(LesstifVersion < 82); }],
-                              [ac_cv_good_lesstif=yes],
-                              [ac_cv_good_lesstif=no],
-                              # cross compiling?  Make an ass out of umption.
-                              [ac_cv_good_lesstif=yes])])
-  good_lesstif=$ac_cv_good_lesstif
-fi
+if test "$with_xshm" = yes; then
 
 
+  # first check for Xshm.h.
+  AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes])
 
 
-# check for XPM header.
-#
-have_xpm=no
-with_xpm_req=unspecified
-AC_ARG_WITH(xpm,[
-Demo options:
+  # if that succeeded, then check for sys/ipc.h.
+  if test "$have_xshm" = yes; then
+    have_xshm=no
+    AC_CHECK_X_HEADER(sys/ipc.h, [have_xshm=yes])
+  fi
 
 
-  --with-xpm              Include support for XPM files in some demos,
-                          if possible (this is the default).
-  --without-xpm           Do not compile in support for XPM files.],
-  [with_xpm="$withval"; with_xpm_req="$withval"],[with_xpm=yes])
-if test $with_xpm = yes; then
-  AC_CHECK_X_HEADER(X11/xpm.h,
-                  [have_xpm=yes
-                   AC_DEFINE(HAVE_XPM)
-                   XPM_LIBS="-lXpm"])
-elif test $with_xpm != no; then
-  echo "error: must be yes or no: --with-xpm=$with_xpm"
+  # if that succeeded, then check for sys/shm.h.
+  if test "$have_xshm" = yes; then
+    have_xshm=no
+    AC_CHECK_X_HEADER(sys/shm.h, [have_xshm=yes])
+  fi
+
+  # AIX is pathological, as usual: apparently it's normal for the Xshm headers
+  # to exist, but the library code to not exist.  And even better, the library
+  # code is in its own library: libXextSam.a.  So, if we're on AIX, and that
+  # lib doesn't exist, give up.  (This lib gets added to X_EXTRA_LIBS, and
+  # that's not quite right, but close enough.)
+  #
+  case "$host" in
+    *-aix*)
+      if [ `uname -v` -eq 3 ]; then
+        have_xshm=no
+        AC_CHECK_X_LIB(XextSam, XShmQueryExtension,
+                       [have_xshm=yes; X_EXTRA_LIBS="$X_EXTRA_LIBS -lXextSam"],
+                       [true], -lX11 -lXext -lm)
+      fi
+    ;;
+  esac
+
+  # if that succeeded, then we've really got it.
+  if test "$have_xshm" = yes; then
+    AC_DEFINE(HAVE_XSHM_EXTENSION)
+  fi
+
+elif test "$with_xshm" != no; then
+  echo "error: must be yes or no: --with-xshm-ext=$with_xshm"
   exit 1
 fi
 
 
   exit 1
 fi
 
 
-# check for the GL header
+###############################################################################
 #
 #
-have_gl=no
-with_gl_req=unspecified
-AC_ARG_WITH(gl,
-[  --with-gl               Build those demos which depend on OpenGL,
-                          if possible (this is the default).
-  --without-gl            Do not build the OpenGL demos.],
-  [with_gl="$withval"; with_gl_req="$withval"],[with_gl=yes])
+#       Check for the DOUBLE-BUFFER server extension.
+#
+###############################################################################
 
 
-if test $with_gl = yes; then
-  AC_CHECK_X_HEADER(GL/gl.h, have_gl=yes, have_gl=no)
-  if test $have_gl = yes ; then
-    AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no)
-  fi
+have_xdbe=no
+with_xdbe_req=unspecified
+AC_ARG_WITH(xdbe-ext,
+[  --with-xdbe-ext         Include support for the DOUBLE-BUFFER extension.],
+  [with_xdbe="$withval"; with_xdbe_req="$withval"],[with_xdbe=yes])
 
 
-  # If we have the headers, try and figure out which vendor it's from.
-  #
-  if test $have_gl = yes ; then
+HANDLE_X_PATH_ARG(with_xdbe, --with-xdbe-ext, DOUBLE-BUFFER)
 
 
-    AC_DEFINE(HAVE_GL)
-    have_mesa_gl=no
-    AC_EGREP_X_HEADER(Mesa, GL/glx.h, [have_mesa_gl=yes])
-    if test $have_mesa_gl = no ; then
-      GL_LIBS="-lGL -lGLU"
-    else
-      AC_DEFINE(HAVE_MESA_GL)
-      GL_LIBS="-lMesaGL -lMesaGLU"
-    fi
+if test "$with_xdbe" = yes; then
+
+  AC_CHECK_X_HEADER(X11/extensions/Xdbe.h, [have_xdbe=yes])
+  if test "$have_xdbe" = yes; then
+    AC_DEFINE(HAVE_DOUBLE_BUFFER_EXTENSION)    
   fi
 
   fi
 
-elif test $with_gl != no; then
-  echo "error: must be yes or no: --with-gl=$with_gl"
+elif test "$with_xdbe" != no; then
+  echo "error: must be yes or no: --with-xdbe-ext=$with_xshm"
   exit 1
 fi
 
 
   exit 1
 fi
 
 
-# check for SGI XReadDisplay server extension header.
+###############################################################################
+#
+#       Check for the SGI XReadDisplay server extension.
 #
 #
+#       Note: this has to be down here, rather than up with the other server
+#       extension tests, so that the output of `configure --help' is in the
+#       right order.  Arrgh!
+#
+###############################################################################
+
 have_readdisplay=no
 with_readdisplay_req=unspecified
 AC_ARG_WITH(readdisplay,
 have_readdisplay=no
 with_readdisplay_req=unspecified
 AC_ARG_WITH(readdisplay,
-[  --with-readdisplay      Include support for the XReadDisplay server
-                          extension if possible (this is the default).
-  --without-readdisplay   Do not compile in support for this extension.],
+[  --with-readdisplay      Include support for the XReadDisplay extension.],
   [with_readdisplay="$withval"; with_readdisplay_req="$withval"],
   [with_readdisplay=yes])
   [with_readdisplay="$withval"; with_readdisplay_req="$withval"],
   [with_readdisplay=yes])
-if test $with_readdisplay = yes; then
+
+HANDLE_X_PATH_ARG(with_readdisplay, --with-readdisplay, XReadDisplay)
+
+if test "$with_readdisplay" = yes; then
   AC_CHECK_X_HEADER(X11/extensions/readdisplay.h,
   AC_CHECK_X_HEADER(X11/extensions/readdisplay.h,
-                   AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION))
-elif test $with_readdisplay != no; then
+                    AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION))
+elif test "$with_readdisplay" != no; then
   echo "error: must be yes or no: --with-readdisplay=$with_readdisplay"
   exit 1
 fi
 
 
   echo "error: must be yes or no: --with-readdisplay=$with_readdisplay"
   exit 1
 fi
 
 
-# check for SGI's Iris Video Library header.
+###############################################################################
 #
 #
+#       Check for the SGI Iris Video Library.
+#
+###############################################################################
+
 have_sgivideo=no
 with_sgivideo_req=unspecified
 AC_ARG_WITH(sgivideo,
 have_sgivideo=no
 with_sgivideo_req=unspecified
 AC_ARG_WITH(sgivideo,
-[  --with-sgivideo         Include support for SGI's Iris Video Library
-                          if possible (this is the default).
-  --without-sgivideo       Do not compile in support for this library.],
+[  --with-sgivideo         Include support for SGI's Iris Video Library.],
   [with_sgivideo="$withval"; with_sgivideo_req="$withval"],
   [with_sgivideo=yes])
   [with_sgivideo="$withval"; with_sgivideo_req="$withval"],
   [with_sgivideo=yes])
-if test $with_sgivideo = yes; then
+
+HANDLE_X_PATH_ARG(with_sgivideo, --with-sgivideo, Iris Video)
+
+if test "$with_sgivideo" = yes; then
   AC_CHECK_X_HEADER(dmedia/vl.h, have_sgivideo=yes)
   AC_CHECK_X_HEADER(dmedia/vl.h, have_sgivideo=yes)
-  if test $have_sgivideo = yes; then
+  if test "$have_sgivideo" = yes; then
     have_sgivideo=no
     have_sgivideo=no
-    AC_CHECK_LIB(vl, vlOpenVideo, have_sgivideo=yes)
-    if test $have_sgivideo = yes; then
+    AC_CHECK_LIB(vl, vlOpenVideo, [have_sgivideo=yes])
+    if test "$have_sgivideo" = yes; then
       SGI_VIDEO_OBJS="$(UTILS_BIN)/sgivideo.o"
       SGI_VIDEO_LIBS="-lvl"
       AC_DEFINE(HAVE_SGI_VIDEO)
     fi
   fi
       SGI_VIDEO_OBJS="$(UTILS_BIN)/sgivideo.o"
       SGI_VIDEO_LIBS="-lvl"
       AC_DEFINE(HAVE_SGI_VIDEO)
     fi
   fi
-elif test $with_sgivideo != no; then
+elif test "$with_sgivideo" != no; then
   echo "error: must be yes or no: --with-sgivideo=$with_sgivideo"
   exit 1
 fi
 
 
   echo "error: must be yes or no: --with-sgivideo=$with_sgivideo"
   exit 1
 fi
 
 
-
-# Try to find a program to generate random text.
+###############################################################################
+#
+#       Check for a program to generate random text.
 #
 #
-# Zippy is funnier than the idiocy generally spat out by `fortune',
-# so try to find that, by invoking Emacs and asking it where its 
-# libexec directory is ("yow" lives in there.)
+#       Zippy is funnier than the idiocy generally spat out by `fortune',
+#       so try to find that, by invoking Emacs and asking it where its 
+#       libexec directory is ("yow" lives in there.)
 #
 #
-# If that doesn't work, see if fortune, zippy, or yow are on $PATH,
-# and if so, use them.
+#       If that doesn't work, see if fortune, zippy, or yow are on $PATH,
+#       and if so, use them.
 #
 #
-# If that doesn't work, look in /usr/games, and if it's there, use
-# the full pathname.
+#       If that doesn't work, look in /usr/games, and if it's there, use
+#       the full pathname.
 #
 #
+###############################################################################
+
 with_zippy_req=""
 with_zippy_req=""
-AC_ARG_WITH(zippy,
-[  --with-zippy=PROGRAM    Some demos are able to run an external program and
+AC_ARG_WITH(zippy,[
+  --with-zippy=PROGRAM    Some demos are able to run an external program and
                           display its text; this names the program to use by
                           default (though it can be overridden with X
                           resources.)  If you don't specify this, the default
                           is to use \"yow\" from the Emacs distribution (if you
                           display its text; this names the program to use by
                           default (though it can be overridden with X
                           resources.)  If you don't specify this, the default
                           is to use \"yow\" from the Emacs distribution (if you
-                          have it) or else to use \"fortune\".],
-  [ with_zippy_req="$withval"; with_zippy="$withval" ],
-  [ with_zippy_req="$withval"; with_zippy="$withval" ])
+                          have it) or else to use \"fortune\".
+],
+  [with_zippy_req="$withval"; with_zippy="$withval"],[with_zippy=yes])
 
 if test "$with_zippy" = no || test "$with_zippy" = yes ; then
   with_zippy=""
 
 if test "$with_zippy" = no || test "$with_zippy" = yes ; then
   with_zippy=""
@@ -905,17 +2222,17 @@ if test ! -n "$ac_cv_zippy_program"; then
     # get emacs to tell us where the libexec directory is.
     #
     dir=`$emacs_exe $eargs '(princ (concat exec-directory "\n"))' \
     # get emacs to tell us where the libexec directory is.
     #
     dir=`$emacs_exe $eargs '(princ (concat exec-directory "\n"))' \
-        2>/dev/null | tail -1`
+         2>/dev/null | tail -1`
     dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
     #
     # try running libexec/yow and see if it exits without error.
     #
     dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
     #
     # try running libexec/yow and see if it exits without error.
     #
-    if test x"$dir" != x -a -x $dir/yow ; then
+    if test x"$dir" != x -a -x "$dir/yow" ; then
       if $dir/yow >&- 2>&- ; then
       if $dir/yow >&- 2>&- ; then
-       ac_cv_zippy_program="$dir/yow"
-       AC_MSG_RESULT($ac_cv_zippy_program)
+        ac_cv_zippy_program="$dir/yow"
+        AC_MSG_RESULT($ac_cv_zippy_program)
       else
       else
-       AC_MSG_RESULT(no)
+        AC_MSG_RESULT(no)
       fi
     fi
   fi
       fi
     fi
   fi
@@ -927,33 +2244,46 @@ if test ! -n "$ac_cv_zippy_program"; then
       # get xemacs to tell us where the libexec directory is.
       #
       dir=`$xemacs_exe $eargs '(princ (concat exec-directory "\n"))' \
       # get xemacs to tell us where the libexec directory is.
       #
       dir=`$xemacs_exe $eargs '(princ (concat exec-directory "\n"))' \
-          2>/dev/null | tail -1`
+           2>/dev/null | tail -1`
       dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
       #
       # try running libexec/yow and see if it exits without error.
       #
       dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
       #
       # try running libexec/yow and see if it exits without error.
       #
-      if test x"$dir" != x -a -x $dir/yow ; then
+      if test x"$dir" != x -a -x "$dir/yow" ; then
         if $dir/yow >&- 2>&- ; then
         if $dir/yow >&- 2>&- ; then
-         ac_cv_zippy_program="$dir/yow"
-         AC_MSG_RESULT($ac_cv_zippy_program)
-       else
-         #
-         # in some xemacs installations, the pathname of the yow.lines file
-         # isn't hardcoded into the yow executable, and must be passed on 
-         # the command line.  See if it's in libexec/../etc/.
-
-         # M4 sucks!!
-         changequote(X,Y)
-         dir_up=`echo "$dir" | sed 's@/[^/]*$@@'`
-         changequote([,])
-
-          yow="yow -f $dir_up/etc/yow.lines"
-         if $dir/$yow >&- 2>&- ; then
-           ac_cv_zippy_program="$dir/$yow"
-           AC_MSG_RESULT($ac_cv_zippy_program)
-         else
-           AC_MSG_RESULT(no)
-         fi
+          ac_cv_zippy_program="$dir/yow"
+          AC_MSG_RESULT($ac_cv_zippy_program)
+        else
+          #
+          # in some xemacs installations, the pathname of the yow.lines file
+          # isn't hardcoded into the yow executable, and must be passed on 
+          # the command line.  See if it's in libexec/../etc/.
+
+          # M4 sucks!!
+          changequote(X,Y)
+          dir_up=`echo "$dir" | sed 's@/[^/]*$@@'`
+          changequote([,])
+
+          yowlines="$dir_up/etc/yow.lines"
+          if $dir/yow -f $yowlines >&- 2>&- ; then
+            ac_cv_zippy_program="$dir/yow -f $yowlines"
+            AC_MSG_RESULT($ac_cv_zippy_program)
+          else
+            #
+            # In newer XEmacs releases, yow.lines is in a different place,
+            # and the easiest way to get it is by calling the new function
+            # `locate-data-file'.
+            #
+            yowlines=`$xemacs_exe $eargs \
+              '(princ (concat (locate-data-file "yow.lines") "\n"))' \
+              2>/dev/null | tail -1`
+            if $dir/yow -f $yowlines >&- 2>&- ; then
+              ac_cv_zippy_program="$dir/yow -f $yowlines"
+              AC_MSG_RESULT($ac_cv_zippy_program)
+            else
+              AC_MSG_RESULT(no)
+            fi
+          fi
         fi
       fi
     fi
         fi
       fi
     fi
@@ -966,7 +2296,7 @@ if test ! -n "$ac_cv_zippy_program"; then
     # if that didn't work, try for those programs in /usr/games...
     if test -z "$fortune" ; then
       AC_PATH_PROGS(fortune, [fortune zippy yow], fortune,
     # if that didn't work, try for those programs in /usr/games...
     if test -z "$fortune" ; then
       AC_PATH_PROGS(fortune, [fortune zippy yow], fortune,
-                   /usr/games:/usr/local/games)
+                    /usr/games:/usr/local/games:$PATH)
     fi
   fi
 fi
     fi
   fi
 fi
@@ -978,208 +2308,20 @@ fi
 AC_DEFINE_UNQUOTED(ZIPPY_PROGRAM, "$ac_cv_zippy_program")
 
 
 AC_DEFINE_UNQUOTED(ZIPPY_PROGRAM, "$ac_cv_zippy_program")
 
 
-
-
-# Allow locking to be disabled at compile-time.
+###############################################################################
 #
 #
-have_locking=yes
-have_kerberos=no
-with_kerberos_req=unspecified
-have_shadow=no
-with_shadow_req=unspecified
-need_setuid=no
-
-AC_ARG_ENABLE(locking,[
-Locking options:
-
-  --enable-locking        Compile in support for locking the display
-                          (this is the default.)
-  --disable-locking       Do not allow locking at all.],
-  [enable_locking="$enableval"],[enable_locking=yes])
-if test $enable_locking = yes; then
-
-  # Check for Kerberos.
-  #
-  AC_ARG_WITH(kerberos, [
-  --with-kerberos         Include support for Kerberos authentication,
-                          if possible (this is the default.)
-  --without-kerberos      Do not compile in support for Kerberos.],
-  [with_kerberos="$withval"; with_kerberos_req="$withval"],[with_kerberos=yes])
-  if test $with_kerberos = yes; then
-    AC_CACHE_CHECK([for Kerberos], ac_cv_kerberos,
-                  [AC_TRY_X_COMPILE([#include <krb.h>],,
-                                    [ac_cv_kerberos=yes],
-                                    [ac_cv_kerberos=no])])
-    if test $ac_cv_kerberos = yes ; then
-      have_kerberos=yes
-      AC_DEFINE(HAVE_KERBEROS)
-      PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes -lnsl -lsocket"
-    fi
-  elif test $with_kerberos != no; then
-    echo "error: must be yes or no: --with-kerberos=$with_kerberos"
-    exit 1
-  fi
-
-  # Next, check for the nine billion variants of shadow passwords...
-
-  passwd_cruft_done=no
-  AC_ARG_WITH(shadow,
-[  --with-shadow           Include support for shadow password authentication,
-                          if possible (this is the default, if no Kerberos.)
-  --without-shadow        Do not compile in support for shadow passwords.
-],
-  [with_shadow="$withval"; with_shadow_req="$withval"],[with_shadow=yes])
-  if test $with_shadow = no; then
-    passwd_cruft_done=yes
-  elif test $with_shadow != yes; then
-    echo "error: must be yes or no: --with-shadow=$with_shadow"
-    exit 1
-  fi
-
-
-  # Sun's "adjunct" passwords.
-  #
-  if test $passwd_cruft_done = no ; then
-    AC_CACHE_CHECK([for Sun-style shadow passwords], ac_cv_sun_adjunct,
-                  [AC_TRY_X_COMPILE([#include <stdlib.h>
-                                     #include <unistd.h>
-                                     #include <sys/types.h>
-                                     #include <sys/label.h>
-                                     #include <sys/audit.h>
-                                     #include <pwdadj.h>],
-                       [struct passwd_adjunct *p = getpwanam("nobody");
-                        const char *pw = p->pwa_passwd;],
-                       [ac_cv_sun_adjunct=yes],
-                       [ac_cv_sun_adjunct=no])])
-    if test $ac_cv_sun_adjunct = yes; then
-      have_shadow=yes
-      need_setuid=yes
-      passwd_cruft_done=yes
-      AC_DEFINE(HAVE_ADJUNCT_PASSWD)
-    fi
-  fi
-
-  # DEC and SCO so-called "enhanced" security.
-  #
-  if test $passwd_cruft_done = no ; then
-    AC_CACHE_CHECK([for DEC-style shadow passwords], ac_cv_enhanced_passwd,
-                  [AC_TRY_X_COMPILE([#include <stdlib.h>
-                                     #include <unistd.h>
-                                     #include <sys/types.h>
-                                     #include <pwd.h>
-                                     #include <sys/security.h>
-                                     #include <prot.h>],
-                       [struct pr_passwd *p;
-                        const char *pw;
-                        set_auth_parameters(0, 0);
-                        check_auth_parameters();
-                        p = getprpwnam("nobody");
-                        pw = p->ufld.fd_encrypt;],
-                       [ac_cv_enhanced_passwd=yes],
-                       [ac_cv_enhanced_passwd=no])])
-    if test $ac_cv_enhanced_passwd = yes; then
-      have_shadow=yes
-      need_setuid=yes
-      passwd_cruft_done=yes
-      AC_DEFINE(HAVE_ENHANCED_PASSWD)
-
-      # On SCO, getprpwnam() is in -lprot (which uses nap() from -lx)
-      # (I'm told it needs -lcurses too, but I don't understand why.)
-      AC_CHECK_LIB(prot, getprpwnam, 
-                  [PASSWD_LIBS="$PASSWD_LIBS -lprot -lcurses -lx"],
-                  [# On DEC, getprpwnam() is in -lsecurity
-                   AC_CHECK_LIB(security, getprpwnam, 
-                                [PASSWD_LIBS="$PASSWD_LIBS -lsecurity"])],
-                  [-lx])
-    fi
-  fi
-
-  # HP's entry in the "Not Invented Here" Sweepstakes.
-  #
-  if test $passwd_cruft_done = no ; then
-    AC_CACHE_CHECK([for HP-style shadow passwords], ac_cv_hpux_passwd,
-                  [AC_TRY_X_COMPILE([#include <stdlib.h>
-                                     #include <unistd.h>
-                                     #include <sys/types.h>
-                                     #include <pwd.h>
-                                     #include <hpsecurity.h>
-                                     #include <prot.h>],
-                       [struct s_passwd *p = getspwnam("nobody");
-                        const char *pw = p->pw_passwd;],
-                       [ac_cv_hpux_passwd=yes],
-                       [ac_cv_hpux_passwd=no])])
-    if test $ac_cv_hpux_passwd = yes; then
-      have_shadow=yes
-      need_setuid=yes
-      passwd_cruft_done=yes
-      AC_DEFINE(HAVE_HPUX_PASSWD)
-
-      # on HPUX, bigcrypt is in -lsec
-      AC_CHECK_LIB(sec, bigcrypt, [PASSWD_LIBS="$PASSWD_LIBS -lsec"])
-    fi
-  fi
-
-  # Traditional (ha!) shadow passwords.
-  #
-  if test $passwd_cruft_done = no ; then
-    AC_CACHE_CHECK([for generic shadow passwords], ac_cv_shadow,
-                  [AC_TRY_X_COMPILE([#include <stdlib.h>
-                                     #include <unistd.h>
-                                     #include <sys/types.h>
-                                     #include <pwd.h>
-                                     #include <shadow.h>],
-                       [struct spwd *p = getspnam("nobody");
-                        const char *pw = p->sp_pwdp;],
-                       [ac_cv_shadow=yes],
-                       [ac_cv_shadow=no])])
-    if test $ac_cv_shadow = yes; then
-      have_shadow=yes
-      need_setuid=yes
-      passwd_cruft_done=yes
-      AC_DEFINE(HAVE_SHADOW_PASSWD)
-
-      # On some systems (UnixWare 2.1), getspnam() is in -lgen instead of -lc.
-      have_getspnam=no
-      AC_CHECK_LIB(c, getspnam, [have_getspnam=yes])
-      if test $have_getspnam = no ; then
-        AC_CHECK_LIB(gen, getspnam,
-                    [have_getspnam=yes; PASSWD_LIBS="$PASSWD_LIBS -lgen"])
-      fi
-    fi
-  fi
-
-  # On some systems (UnixWare 2.1), crypt() is in -lcrypt instead of -lc.
-  have_crypt=no
-  AC_CHECK_LIB(c, crypt, [have_crypt=yes])
-  if test $have_crypt = no ; then
-    AC_CHECK_LIB(crypt, crypt,
-                [have_crypt=yes; PASSWD_LIBS="$PASSWD_LIBS -lcrypt"])
-  fi
-
-
-  # Most of the above shadow mechanisms will have set need_setuid to yes,
-  # if they were found.  But, on some systems, we need setuid even when
-  # using plain old vanilla passwords.
-  #
-  if test $need_setuid = no ; then
-    case "$host" in
-      *-hpux* | *-aix* | *-netbsd* | *-freebsd* | *-openbsd* )
-        need_setuid=yes
-      ;;
-    esac
-  fi
-
-elif test $enable_locking = no; then
-  AC_DEFINE(NO_LOCKING)
-else
-  echo "error: must be yes or no: --enable-locking=$enable_locking"
-  exit 1
-fi
+#       Done testing.  Now, set up the various -I and -L variables,
+#       and decide which GUI program to build by default.
+#
+###############################################################################
 
 
+DEPEND=makedepend
+DEPEND_FLAGS=
+DEPEND_DEFINES=
 
 
 if test \! -z "$includedir" ; then 
 
 
 if test \! -z "$includedir" ; then 
-  INCLUDES="-I$includedir"
+  INCLUDES="$INCLUDES -I$includedir"
 fi
 
 if test \! -z "$libdir" ; then
 fi
 
 if test \! -z "$libdir" ; then
@@ -1187,45 +2329,39 @@ if test \! -z "$libdir" ; then
 fi
 
 
 fi
 
 
-##### should have options to override the DEPEND crap, I guess...
-DEPEND=makedepend
-DEPEND_FLAGS=
-DEPEND_DEFINES=
-
+ALL_DEMO_PROGRAMS=
+if test "$have_motif" = yes; then
+  PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xm
+  ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
+fi
+if test "$have_gtk" = yes; then
+  PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Gtk
+  ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
+fi
 
 
 
 
-# Done testing things -- now substitute in some stuff for the Makefiles.
-#
-if test $have_motif = yes; then
-  AC_DEFINE(HAVE_MOTIF)
-  DIALOG_SRCS='$(MOTIF_SRCS)'
-  DIALOG_OBJS='$(MOTIF_OBJS)'
-elif test $have_athena = yes; then
-  AC_DEFINE(HAVE_ATHENA)
-  DIALOG_SRCS='$(ATHENA_SRCS)'
-  DIALOG_OBJS='$(ATHENA_OBJS)'
-else
-  DIALOG_SRCS=''
-  DIALOG_OBJS=''
+if test "$have_kerberos" = yes; then
+  PASSWD_SRCS="$PASSWD_SRCS \$(KERBEROS_SRCS)"
+  PASSWD_OBJS="$PASSWD_OBJS \$(KERBEROS_OBJS)"
 fi
 fi
-
-if test $have_kerberos = yes; then
-  PASSWD_SRCS='$(KERBEROS_SRCS)'
-  PASSWD_OBJS='$(KERBEROS_OBJS)'
-else
-  PASSWD_SRCS='$(PWENT_SRCS)'
-  PASSWD_OBJS='$(PWENT_OBJS)'
+if test "$have_pam" = yes; then
+  PASSWD_SRCS="$PASSWD_SRCS \$(PAM_SRCS)"
+  PASSWD_OBJS="$PASSWD_OBJS \$(PAM_OBJS)"
+  INSTALL_PAM="install-pam"
 fi
 fi
+  PASSWD_SRCS="$PASSWD_SRCS \$(PWENT_SRCS)"
+  PASSWD_OBJS="$PASSWD_OBJS \$(PWENT_OBJS)"
 
 
-if test $enable_locking = yes; then
+
+if test "$enable_locking" = yes; then
   LOCK_SRCS='$(LOCK_SRCS_1) $(PASSWD_SRCS)'
   LOCK_OBJS='$(LOCK_OBJS_1) $(PASSWD_OBJS)'
 else
   LOCK_SRCS='$(LOCK_SRCS_1) $(PASSWD_SRCS)'
   LOCK_OBJS='$(LOCK_OBJS_1) $(PASSWD_OBJS)'
 else
-  LOCK_SRCS=''
-  LOCK_OBJS=''
+  LOCK_SRCS='$(NOLOCK_SRCS_1)'
+  LOCK_OBJS='$(NOLOCK_OBJS_1)'
 fi
 
 fi
 
-if test $need_setuid = yes; then
+if test "$need_setuid" = yes; then
   NEED_SETUID=yes
   INSTALL_SETUID='$(INSTALL) $(SUID_FLAGS)'
 else
   NEED_SETUID=yes
   INSTALL_SETUID='$(INSTALL) $(SUID_FLAGS)'
 else
@@ -1234,51 +2370,95 @@ else
 fi
 
 tab='  '
 fi
 
 tab='  '
-if test $have_gl = yes; then
+if test "$have_gl" = yes; then
   GL_EXES='$(GL_EXES)'
   GL_EXES='$(GL_EXES)'
-  GL_KLUDGE_1=${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}'  \'
-  GL_KLUDGE_2=${tab}
+  GL_MEN='$(GL_MEN)'
+  GL_KLUDGE="${tab}  "
+else
+  GL_KLUDGE="-${tab}  "
+fi
+
+if test "$have_gle" = yes; then
+  GLE_EXES='$(GLE_EXES)'
+  GLE_MEN='$(GLE_MEN)'
+  GLE_KLUDGE="${tab}   "
 else
 else
-  GL_KLUDGE_1=${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}'\n'
-  GL_KLUDGE_2='!'${tab}
+  GLE_KLUDGE="-${tab}   "
 fi
 
 fi
 
+
+###############################################################################
+#
+#       Perform substitutions and write Makefiles.
+#
+###############################################################################
+
 AC_SUBST(INCLUDES)
 
 AC_SUBST(INCLUDES)
 
+AC_SUBST(PREFERRED_DEMO_PROGRAM)
+AC_SUBST(ALL_DEMO_PROGRAMS)
 AC_SUBST(SAVER_LIBS)
 AC_SUBST(SAVER_LIBS)
+AC_SUBST(MOTIF_LIBS)
+AC_SUBST(GTK_LIBS)
 AC_SUBST(HACK_LIBS)
 AC_SUBST(XPM_LIBS)
 AC_SUBST(GL_LIBS)
 AC_SUBST(HACK_LIBS)
 AC_SUBST(XPM_LIBS)
 AC_SUBST(GL_LIBS)
+AC_SUBST(GLE_LIBS)
 AC_SUBST(PASSWD_LIBS)
 AC_SUBST(INSTALL_SETUID)
 AC_SUBST(PASSWD_LIBS)
 AC_SUBST(INSTALL_SETUID)
+AC_SUBST(INSTALL_DIRS)
 AC_SUBST(NEED_SETUID)
 AC_SUBST(NEED_SETUID)
+AC_SUBST(INSTALL_PAM)
 AC_SUBST(SGI_VIDEO_OBJS)
 AC_SUBST(SGI_VIDEO_LIBS)
 
 AC_SUBST(SGI_VIDEO_OBJS)
 AC_SUBST(SGI_VIDEO_LIBS)
 
-AC_SUBST(DIALOG_SRCS)
-AC_SUBST(DIALOG_OBJS)
 AC_SUBST(PASSWD_SRCS)
 AC_SUBST(PASSWD_OBJS)
 AC_SUBST(XMU_SRCS)
 AC_SUBST(XMU_OBJS)
 AC_SUBST(PASSWD_SRCS)
 AC_SUBST(PASSWD_OBJS)
 AC_SUBST(XMU_SRCS)
 AC_SUBST(XMU_OBJS)
+AC_SUBST(SAVER_GL_SRCS)
+AC_SUBST(SAVER_GL_OBJS)
+AC_SUBST(SAVER_GL_LIBS)
 AC_SUBST(LOCK_SRCS)
 AC_SUBST(LOCK_OBJS)
 AC_SUBST(GL_EXES)
 AC_SUBST(LOCK_SRCS)
 AC_SUBST(LOCK_OBJS)
 AC_SUBST(GL_EXES)
-AC_SUBST(GL_KLUDGE_1)
-AC_SUBST(GL_KLUDGE_2)
+AC_SUBST(GL_MEN)
+AC_SUBST(GL_KLUDGE)
+AC_SUBST(GLE_EXES)
+AC_SUBST(GLE_MEN)
+AC_SUBST(GLE_KLUDGE)
 AC_SUBST(HACKDIR)
 AC_SUBST(HACKDIR)
+
+APPDEFAULTS=$ac_x_app_defaults
 AC_SUBST(APPDEFAULTS)
 
 AC_SUBST(DEPEND)
 AC_SUBST(DEPEND_FLAGS)
 AC_SUBST(DEPEND_DEFINES)
 AC_SUBST(APPDEFAULTS)
 
 AC_SUBST(DEPEND)
 AC_SUBST(DEPEND_FLAGS)
 AC_SUBST(DEPEND_DEFINES)
+AC_SUBST(PERL)
 
 
-# Print some warnings before emitting the Makefiles.
+AC_OUTPUT(Makefile
+          utils/Makefile
+          driver/Makefile
+          hacks/Makefile
+          hacks/glx/Makefile
+          driver/XScreenSaver.ad)
+
+###############################################################################
 #
 #
+#       Print some warnings at the end.
+#
+###############################################################################
+
+warn_prefix_1="    Warning:"
+warn_prefix_2="       Note:"
+warn_prefix="$warn_prefix_1"
+
 warning=no
 warnsep='    #################################################################'
 warning=no
 warnsep='    #################################################################'
+
 warnpre() {
 warnpre() {
-  if test $warning = no ; then
+  if test "$warning" = no ; then
     echo '' ; echo "$warnsep" ; echo ''
     warning=yes
   fi
     echo '' ; echo "$warnsep" ; echo ''
     warning=yes
   fi
@@ -1286,17 +2466,17 @@ warnpre() {
 
 warn() {
   warnpre
 
 warn() {
   warnpre
-  if test $warning = long ; then echo '' ; fi
+  if test "$warning" = long ; then echo '' ; fi
   warning=yes
   warning=yes
-  echo "    Warning: $@"
+  echo "$warn_prefix $@"
 }
 
 warnL() {
   was=$warning
   warnpre
   warning=yes
 }
 
 warnL() {
   was=$warning
   warnpre
   warning=yes
-  if test $was != no ; then echo '' ; fi
-  echo "    Warning: $@"
+  if test "$was" != no ; then echo '' ; fi
+  echo "$warn_prefix $@"
 }
 
 warn2() {
 }
 
 warn2() {
@@ -1304,98 +2484,332 @@ warn2() {
   warning=long
 }
 
   warning=long
 }
 
-if test $with_sgi_req = yes -a $have_sgi = no ; then
+note() {
+  warn_prefix="$warn_prefix_2"
+  warn $@
+  warn_prefix="$warn_prefix_1"
+}
+
+noteL() {
+  warn_prefix="$warn_prefix_2"
+  warnL $@
+  warn_prefix="$warn_prefix_1"
+}
+
+
+if test "$with_sgi_req" = yes -a "$have_sgi" = no ; then
   warn 'The SGI saver extension was requested, but was not found.'
 fi
 
   warn 'The SGI saver extension was requested, but was not found.'
 fi
 
-if test $with_mit_req = yes -a $have_mit = no ; then
+if test "$with_mit_req" = yes -a "$have_mit" = no ; then
   warn 'The MIT saver extension was requested, but was not found.'
 fi
 
   warn 'The MIT saver extension was requested, but was not found.'
 fi
 
-if test $with_xidle_req = yes -a $have_xidle = no ; then
+if test "$with_xidle_req" = yes -a "$have_xidle" = no ; then
   warn 'The XIdle extension was requested, but was not found.'
 fi
 
   warn 'The XIdle extension was requested, but was not found.'
 fi
 
-if test $with_xshm_req = yes -a $have_xshm = no ; then
+if test "$with_xshm_req" = yes -a "$have_xshm" = no ; then
   warn 'The XSHM extension was requested, but was not found.'
 fi
 
   warn 'The XSHM extension was requested, but was not found.'
 fi
 
-if test $with_sgivc_req = yes -a $have_sgivc = no ; then
+if test "$with_xdbe_req" = yes -a "$have_xdbe" = no ; then
+  warn 'The DOUBLE-BUFFER extension was requested, but was not found.'
+fi
+
+if test "$with_sgivc_req" = yes -a "$have_sgivc" = no ; then
   warn 'The SGI-VIDEO-CONTROL extension was requested, but was not found.'
 fi
 
   warn 'The SGI-VIDEO-CONTROL extension was requested, but was not found.'
 fi
 
-if test $have_motif = no -a $have_athena = no ; then
-  warnL "Neither Motif nor Athena widgets seem to be available;"
-  warn2 "one or the other is required."
-  proselytize_motif=no
+if test "$with_dpms_req" = yes -a "$have_dpms" = no ; then
+  warn 'The DPMS extension was requested, but was not found.'
+fi
+
+if test "$with_xf86vmode_req" = yes -a "$have_xf86vmode" = no ; then
+  warn 'The XF86VMODE extension was requested, but was not found.'
+fi
+
+if test "$with_proc_interrupts_req" = yes -a "$have_proc_interrupts" = no; then
+  warn "Checking of /proc/interrupts was requested, but it's bogus."
+fi
+
+
+if test "$have_motif" = no -a "$have_gtk" = no; then
+  warnL "Neither Motif nor Gtk seem to be available;"
+  warn2 "the \`xscreensaver-demo' program requires one of these."
 
 
-elif test $with_motif_req = yes -a $have_motif = no ; then
+elif test "$with_motif_req" = yes -a "$have_motif" = no ; then
   warnL "Use of Motif was requested, but it wasn't found;"
   warnL "Use of Motif was requested, but it wasn't found;"
-  warn2 "Athena will be used instead."
+  warn2 "Gtk will be used instead."
 
 
-elif test $with_athena_req = yes -a $have_athena = no ; then
-  warnL "Use of Athena was requested, but it wasn't found;"
+elif test "$jurassic_gtk" = yes ; then
+
+  pref_gtk=1.2
+
+  v="$ac_gtk_version_string"
+  if test "$with_gtk_req" = yes -a "$ac_gtk_version" = "unknown" ; then
+    warnL "Use of Gtk was requested, but its version number is unknown;"
+  elif test "$with_gtk_req" = yes ; then
+    warnL "Use of Gtk was requested, but it is version $v;"
+  else
+    warnL "Gtk was found on this system, but it is version $v;"
+  fi
+
+  warn2 "Gtk $pref_gtk or newer is required.  Motif will be used instead."
+
+elif test "$with_gtk_req" = yes -a "$have_gtk" = no ; then
+  warnL "Use of Gtk was requested, but it wasn't found;"
   warn2 "Motif will be used instead."
   warn2 "Motif will be used instead."
+
+fi
+
+
+if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
+
+  preferred_lesstif=0.86
+
+  if test "$lesstif_version" = unknown; then
+    warnL "Unable to determine the LessTif version number!"
+    warn2 "Make sure you are using version $preferred_lesstif or newer."
+    warn2 "See <http://www.lesstif.org/>."
+
+  elif test \! $lesstif_version -gt 82; then
+    warnL "LessTif version $lesstif_version_string is being used."
+    warn2 "LessTif versions 0.82 and earlier are too buggy to"
+    warn2 "use with XScreenSaver; it is strongly recommended"
+    warn2 "that you upgrade to at least version $preferred_lesstif!"
+    warn2 "See <http://www.lesstif.org/>."
+  fi
 fi
 
 fi
 
-if test $have_motif = yes -a $have_lesstif = yes ; then
-  if test $good_lesstif != yes ; then
-    warnL "Motif is being used, but it appears to actually be"
-    warn2 "LessTif, and the version number is less than 0.82!"
-    warn2 "Such old versions of LessTif are too buggy to use"
-    warn2 "with XScreenSaver; it is strongly recommended that"
-    warn2 "you upgrade!  See <http://www.lesstif.org/>."
+
+
+if test "$have_xpm" = no ; then
+  if test "$with_xpm_req" = yes ; then
+    warnL 'Use of XPM was requested, but it was not found.'
+  elif test "$with_xpm_req" = no ; then
+    noteL 'The XPM library is not being used.'
+  else
+    noteL 'The XPM library was not found.'
   fi
   fi
+
+  echo ''
+  warn2 'Some of the demos will not be as colorful as they'
+  warn2 'could be.  You might want to consider installing XPM'
+  warn2 'and re-running configure.  (Remember to delete the'
+  warn2 'config.cache file first.)  You can find XPM at most'
+  warn2 'X11 archive sites, such as <http://sunsite.unc.edu/>.'
 fi
 
 fi
 
-if test $proselytize_motif = yes ; then
-    warnL "Athena widgets are being used instead of Motif."
-    warn2 "XScreenSaver looks much better with Motif, and has"
-    warn2 "a few extra features as well.  Wouldn't you rather"
-    warn2 "be using Motif?  It is shipped by every commercial"
-    warn2 "Unix vendor; and there is a free implementation"
-    warn2 "available as well: see <http://www.lesstif.org/>."
+
+if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then
+  preferred_mesagl=3.0
+
+  if test "$ac_mesagl_version" = unknown; then
+    warnL "Unable to determine the MesaGL version number!"
+    warn2 "Make sure you are using version $preferred_mesagl or newer."
+
+  elif test \! "$ac_mesagl_version" -gt 2006; then
+    warnL "MesaGL version $ac_mesagl_version_string is being used."
+    warn2 "MesaGL versions 2.6 and earlier have a security bug."
+    warn2 "It is strongly recommended that you upgrade to at"
+    warn2 "least version $preferred_mesagl."
+  fi
 fi
 
 fi
 
-if test $with_xpm_req = yes -a $have_xpm = no ; then
-  warn 'Use of XPM was requested, but it was not found.'
+if test "$have_gl" = no ; then
+  if test "$with_gl_req" = yes ; then
+    warnL 'Use of GL was requested, but it was not found.'
+  elif test "$with_gl_req" = no ; then
+    noteL 'The OpenGL 3D library is not being used.'
+  else
+    noteL 'The OpenGL 3D library was not found.'
+  fi
+
+  if test "$gl_halfassed" = yes ; then
+    echo ''
+    warn2 'More specifically, we found the headers, but not the'
+    warn2 'libraries; so either GL is half-installed on this'
+    warn2 "system, or something else went wrong.  The \`config.log'"
+    warn2 'file might contain some clues.'
+  fi
+
+  echo ''
+  warn2 'Those demos which use 3D will not be built or installed.'
+  warn2 'You might want to consider installing OpenGL and'
+  warn2 're-running configure.  (Remember to delete the'
+  warn2 "config.cache file first.)  If your vendor doesn't ship"
+  warn2 'their own implementation of OpenGL, you can get a free'
+  warn2 'version at <http://www.mesa3d.org/>.  For general OpenGL'
+  warn2 'info, see <http://www.opengl.org/>.'
+
 fi
 
 fi
 
-if test $with_gl_req = yes -a $have_gl = no ; then
-  warn 'Use of GL was requested, but it was not found.'
+
+if test "$have_gl" = yes -a "$have_gle" = no ; then
+  if test "$with_gle_req" = yes ; then
+    noteL 'Use of the GLE (GL Extrusion) library was requested, but'
+    warn2 'it was not found (though the OpenGL library was found, and'
+    warn2 'is being used.)'
+  elif test "$with_gle_req" = no ; then
+    noteL 'The OpenGL Library is being used, but the GLE (GL Extrusion)'
+    warn2 'library is not.'
+  else
+    noteL 'The OpenGL Library was found, but the GLE (GL Extrusion)'
+    warn2 'was not.'
+  fi
+
+  if test "$gle_halfassed" = yes ; then
+    echo ''
+    warn2 'More specifically, we found the headers, but not the'
+    warn2 'libraries; so either GLE is half-installed on this'
+    warn2 "system, or something else went wrong.  The \`config.log'"
+    warn2 'file might contain some clues.'
+  fi
+
+  echo ''
+  warn2 'Some of the OpenGL (3D) demos (those that depend on GLE)'
+  warn2 'will not be built or installed.  You might want to consider'
+  warn2 'installing GLE and re-running configure.  (Remember to delete'
+  warn2 'the config.cache file first.)  You can find the GLE library'
+  warn2 'at <http://www.linas.org/gle/>.  For general OpenGL info,'
+  warn2 'see <http://www.opengl.org/>.'
+
 fi
 
 fi
 
-if test $with_readdisplay_req = yes -a $have_readdisplay = no ; then
+
+if test "$with_readdisplay_req" = yes -a "$have_readdisplay" = no ; then
   warn 'Use of XReadDisplay was requested, but it was not found.'
 fi
 
   warn 'Use of XReadDisplay was requested, but it was not found.'
 fi
 
-if test $with_sgivideo_req = yes -a $have_sgivideo = no ; then
+if test "$with_sgivideo_req" = yes -a "$have_sgivideo" = no ; then
   warn 'Use of the Iris Video Library was requested, but it was not found.'
 fi
 
   warn 'Use of the Iris Video Library was requested, but it was not found.'
 fi
 
-if test $with_kerberos_req = yes -a $have_kerberos = no ; then
+if test -n "$with_zippy_req"; then
+  if test "$with_zippy_req" != "$ac_cv_zippy_program" ; then
+    warnL "$with_zippy_req was requested as the Zippy program,"
+    warn2 "but was not found.  The default will be used instead."
+  fi
+fi
+
+if test "$with_kerberos_req" = yes -a "$have_kerberos" = no ; then
   warn 'Use of Kerberos was requested, but it was not found.'
 fi
 
   warn 'Use of Kerberos was requested, but it was not found.'
 fi
 
-if test $with_shadow_req = yes -a $have_shadow = no ; then
+if test "$with_pam_req" = yes -a "$have_pam" = no ; then
+  warn 'Use of PAM was requested, but it was not found.'
+fi
+
+if test "$with_shadow_req" = yes -a "$have_shadow" = no ; then
   warn 'Use of shadow passwords was requested, but they were not found.'
 fi
 
   warn 'Use of shadow passwords was requested, but they were not found.'
 fi
 
-if test -n "$with_zippy_req"; then
-  if test "$with_zippy_req" != "$ac_cv_zippy_program" ; then
-    warnL "$with_zippy_req was requested as the Zippy program,"
-    warn2 "but was not found.  The default will be used instead."
+
+# You are in a twisty maze of namespaces and syntaxes, all alike.
+# Fuck the skull of Unix.
+#
+eval bindir=${bindir}
+eval bindir=${bindir}
+eval bindir=${bindir}
+eval bindir=${bindir}
+eval bindir=${bindir}
+eval bindir=${bindir}
+eval HACKDIR=${HACKDIR}
+eval HACKDIR=${HACKDIR}
+eval HACKDIR=${HACKDIR}
+eval HACKDIR=${HACKDIR}
+eval HACKDIR=${HACKDIR}
+eval HACKDIR=${HACKDIR}
+
+# canonicalize slashes.
+bindir=`echo  "${bindir}"  | sed 's@/$@@;s@//*@/@g'`
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+
+
+# Sanity check the subdir
+for bad_choice in xscreensaver xscreensaver-demo xscreensaver-command ; do
+  if test "${HACKDIR}" = "${bindir}/${bad_choice}" ; then
+    echo ""
+    AC_MSG_ERROR([\"--enable-subdir=${bindir}/${bad_choice}\" won't work.
+                   There will be an executable installed with that name, so
+                   that can't be the name of a directory as well.  Please
+                   re-configure with a different directory name.])
+  fi
+done
+
+
+do_dir_warning=no
+
+# Now let's see if there's a previous RPM version already installed.  Blargh!
+
+# M4 sucks!!
+changequote(X,Y)
+rpmv=`(rpm -qv xscreensaver) 2>&- | \
+      sed 's/^xscreensaver-\([0-9][0-9]*[.][0-9][0-9]*\)-[0-9][0-9]*$/\1/'`
+changequote([,])
+
+if test \! -z "$rpmv" ; then
+  rpmbdir=`rpm -ql xscreensaver | sed -n 's@^\(.*\)/xscreensaver-demo$@\1@p'`
+  rpmhdir=`rpm -ql xscreensaver | sed -n 's@^\(.*\)/attraction$@\1@p'`
+
+  warning=no
+  warnL "There is already an installed RPM of xscreensaver $rpmv"
+  warn2 "on this system.  You might want to remove it (with"
+  warn2 '"rpm -ve xscreensaver") before running "make install"'
+  warn2 "from this directory."
+  echo ""
+  warn2 "Alternately, you could build this version of xscreensaver"
+  warn2 'as an RPM, and then install that.  An "xscreensaver.spec"'
+  warn2 "file is included.  See the RPM documentation for more info."
+  echo ""
+
+  if test "$rpmbdir" = "$rpmhdir" ; then
+    warn2 "The RPM version was installed in $rpmbdir."
+  else
+    warn2 "The RPM version was installed in $rpmbdir,"
+    warn2 "with demos in $rpmhdir."
   fi
   fi
+
+  do_dir_warning=yes
 fi
 
 fi
 
-if test $warning != no; then
-  echo '' ; echo "$warnsep" ; echo ''
+
+# Warn about egregious GNOME bogosity.
+#
+if (rpm -qv control-center) >&- 2>&- ; then
+  warning=no
+  warnL "The Gnome Control Center seems to be installed."
+  echo  ""
+  warn2 "Note that simply installing this version of xscreensaver"
+  warn2 "will not cause GNOME to know about the newly-added display"
+  warn2 "modes -- GNOME is just lame that way.  Instead of using the"
+  warn2 "Control Center, try using the \`xscreensaver-demo' command."
 fi
 
 
 fi
 
 
-AC_OUTPUT(Makefile
-         utils/Makefile
-         driver/Makefile
-         hacks/Makefile
-         hacks/glx/Makefile
-         driver/XScreenSaver.ad)
+if test "${bindir}" = "${HACKDIR}" ; then
+  do_dir_warning=yes
+fi
+
+if test "$do_dir_warning" = yes; then
+  echo ""
+  echo "$warnsep"
+  echo ""
+  echo '      When you run "make install", the "xscreensaver",'
+  echo '      "xscreensaver-demo", and "xscreensaver-command" executables'
+  echo "      will be installed in ${bindir}."
+  echo ""
+  echo "      The various graphics demos (100+ different executables) will"
+  echo "      also be installed in ${HACKDIR}."
+  echo ""
+  echo "      If you would prefer the demos to be installed elsewhere"
+  echo "      (for example, in a dedicated directory) you should re-run"
+  echo "      configure with the --enable-subdir=DIR option.  For more"
+  echo "      information, run $0 --help."
+  warning=yes
+fi
+
+if test "$warning" != no; then
+  echo '' ; echo "$warnsep" ; echo ''
+fi