-# configure.in --- xscreensaver, Copyright (c) 1997-2000 Jamie Zawinski.
+# configure.in --- xscreensaver, Copyright (c) 1997-2003 Jamie Zawinski.
#
+AC_PREREQ(2.52)
AC_INIT(driver/subprocs.c)
AC_CONFIG_HEADER(config.h)
fi
done
-
###############################################################################
#
# Function to figure out how to run the compiler.
;;
*-dec-* )
- AC_MSG_RESULT(DEC: adding -std1)
+ AC_MSG_RESULT(DEC: adding -std1 -ieee)
CC="$CC -std1"
;;
if test -n "$GCC"; then
AC_MSG_RESULT(Turning on gcc compiler warnings.)
- CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"
- AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
- CC="$CC -Wp,-lang-c89"
+ CC="$CC -Wall -Wstrict-prototypes -Wnested-externs"
else
case "$host" in
*-irix5* |*-irix6.[0-3]* )
])
+###############################################################################
+#
+# Functions to figure out how to disable // comments in ANSI C code.
+#
+# (With recent gcc, this is done with "-std=c89". With older gcc, this
+# is done by passing "-lang-c89" to cpp, by passing "-Wp,-lang-c89" to
+# gcc. Old gcc doesn't support -std, and new gcc doesn't support -lang.
+# so much for compatibility!)
+#
+###############################################################################
+
+AC_DEFUN(AC_GCC_ACCEPTS_STD,
+ [if test -n "$GCC"; then
+ AC_CACHE_CHECK([whether gcc accepts -std],
+ ac_cv_gcc_accepts_std,
+ [if ( ( gcc -E -std=c89 - </dev/null >/dev/null ) 2>&1 | \
+ grep unrecognized >/dev/null ); then
+ ac_cv_gcc_accepts_std=no
+ else
+ ac_cv_gcc_accepts_std=yes
+ fi])
+ ac_gcc_accepts_std="$ac_cv_gcc_accepts_std"
+ fi
+])
+
+AC_DEFUN(AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE,
+ [if test -n "$GCC"; then
+ AC_GCC_ACCEPTS_STD
+ AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
+ #
+ # The reason that // comments are banned from xscreensaver is that gcc is
+ # basically the only compiler in the world that supports them in C code.
+ # All other vendors support them only in their C++ compilers, not in their
+ # ANSI C compilers. This means that it's a portability problem: every time
+ # these comments have snuck into the xscreensaver source code, I've gotten
+ # complaints about it the next day. So we turn off support for them in gcc
+ # as well to prevent them from accidentially slipping in.
+ #
+ if test "$ac_gcc_accepts_std" = yes ; then
+ #
+ # -std=c89 defines __STRICT_ANSI__, which we don't want.
+ # (That appears to be the only additional preprocessor symbol
+ # it defines, in addition to the syntax changes it makes.)
+ #
+ # -std=gnu89 is no good, because // comments were a GNU extension
+ # before they were in the ANSI C 99 spec... (gcc 2.96 permits //
+ # with -std=gnu89 but not with -std=c89.)
+ #
+ CC="$CC -std=c89 -U__STRICT_ANSI__"
+ else
+ # The old way:
+ CC="$CC -Wp,-lang-c89"
+ fi
+ fi
+])
+
+
+###############################################################################
+#
+# Function to figure out how to turn off Objective C on MacOS X.
+# (We have to do this to work around an Apple-specific gcc bug.)
+#
+###############################################################################
+
+AC_DEFUN(AC_GCC_ACCEPTS_NO_CPP_PRECOMP,
+ [if test -n "$GCC"; then
+ AC_CACHE_CHECK([whether gcc accepts -no-cpp-precomp],
+ ac_cv_gcc_accepts_no_cpp_precomp,
+ [if ( ( gcc -E -no-cpp-precomp - </dev/null >/dev/null ) 2>&1 | \
+ grep unrecognized >/dev/null ); then
+ ac_cv_gcc_accepts_no_cpp_precomp=no
+ else
+ ac_cv_gcc_accepts_no_cpp_precomp=yes
+ fi])
+ ac_gcc_accepts_no_cpp_precomp="$ac_cv_gcc_accepts_no_cpp_precomp"
+ fi
+])
+
+AC_DEFUN(AC_NO_OBJECTIVE_C,
+ [if test -n "$GCC"; then
+ AC_GCC_ACCEPTS_NO_CPP_PRECOMP
+ if test "$ac_gcc_accepts_no_cpp_precomp" = yes ; then
+ AC_MSG_RESULT(Disabling Objective C extensions in ANSI C code.)
+ CC="$CC -no-cpp-precomp"
+ fi
+ fi
+])
+
+
###############################################################################
#
# Function to figure out how to create directory trees.
[ac_cv_install_d_creates_dirs=no
rm -rf conftestdir
if mkdir conftestdir; then
- cd conftestdir >&-
- ${INSTALL} -d `pwd`/dir1/dir2 >&- 2>&-
+ cd conftestdir 2>/dev/null
+ ${INSTALL} -d `pwd`/dir1/dir2 >/dev/null 2>&1
if test -d dir1/dir2/. ; then
ac_cv_install_d_creates_dirs=yes
fi
- cd .. >&-
+ cd .. 2>/dev/null
rm -rf conftestdir
fi
])
[ac_cv_mkdir_p_creates_dirs=no
rm -rf conftestdir
if mkdir conftestdir; then
- cd conftestdir >&-
- mkdir -p dir1/dir2 >&- 2>&-
+ cd conftestdir 2>/dev/null
+ mkdir -p dir1/dir2 >/dev/null 2>&1
if test -d dir1/dir2/. ; then
ac_cv_mkdir_p_creates_dirs=yes
fi
- cd .. >&-
+ cd .. 2>/dev/null
rm -rf conftestdir
fi
])
i.icmp_id = 0;
i.icmp_seq = 0;
si.sin_family = AF_INET;
- ip.ip_hl = 0;],
+ #if defined(__DECC) || defined(_IP_VHL)
+ ip.ip_vhl = 0;
+ #else
+ ip.ip_hl = 0;
+ #endif
+ ],
[ac_cv_have_icmp=yes],
[ac_cv_have_icmp=no])])
if test "$ac_cv_have_icmp" = yes ; then
struct ip ip;
i.type = ICMP_ECHO;
i.code = 0;
- i.cksum = 0;
+ i.checksum = 0;
i.un.echo.id = 0;
i.un.echo.sequence = 0;
si.sin_family = AF_INET;
AC_DEFUN(AC_PATH_X_APP_DEFAULTS_XMKMF,[
rm -fr conftestdir
if mkdir conftestdir; then
- cd conftestdir >&-
+ cd conftestdir 2>/dev/null
# Make sure to not put "make" in the Imakefile rules, since we grep it out.
cat > Imakefile <<'EOF'
acfindx:
@echo 'ac_x_app_defaults="${XAPPLOADDIR}"'
EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ if (xmkmf) >/dev/null 2>&1 && test -f Makefile; then
# GNU make sometimes prints "make[1]: Entering...", which'd confuse us.
eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
fi
- cd .. >&-
+ cd .. 2>/dev/null
rm -fr conftestdir
fi])
#
for version in X11R6 X11R5 X11R4 ; do
# if either pair of directories exists...
- if test -d /usr/lib/$version || test -d /usr/contrib/$version/lib
+ if test -d /usr/include/$version || test -d /usr/contrib/$version/include
then
# if contrib exists, use it...
- if test -d /usr/contrib/$version/lib ; then
+ if test -d /usr/contrib/$version/include ; then
X_CFLAGS="$X_CFLAGS -I/usr/contrib/$version/include"
X_LIBS="$X_LIBS -L/usr/contrib/$version/lib"
fi
# if the "standard" one exists, use it.
- if test -d /usr/lib/$version ; then
+ if test -d /usr/include/$version ; then
X_CFLAGS="$X_CFLAGS -I/usr/include/$version"
X_LIBS="$X_LIBS -L/usr/lib/$version"
fi
# Now find Motif. Thanks for not making xmkmf find this by
# default, you losers.
#
- if test -d /usr/lib/Motif1.2 ; then
+ if test -d /usr/include/Motif2.1 ; then
+ X_CFLAGS="$X_CFLAGS -I/usr/include/Motif2.1"
+ X_LIBS="$X_LIBS -L/usr/lib/Motif2.1"
+ elif test -d /usr/include/Motif1.2 ; then
X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.2"
X_LIBS="$X_LIBS -L/usr/lib/Motif1.2"
- elif test -d /usr/lib/Motif1.1 ; then
+ elif test -d /usr/include/Motif1.1 ; then
X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.1"
X_LIBS="$X_LIBS -L/usr/lib/Motif1.1"
fi
# Now let's check for the pseudo-standard locations for OpenGL and XPM.
#
- if test -d /opt/Mesa/lib ; then
+ if test -d /opt/graphics/OpenGL/include ; then
+ # HP-UX 10.20 puts it here
+ X_CFLAGS="-I/opt/graphics/OpenGL/include $X_CFLAGS"
+ X_LIBS="-L/opt/graphics/OpenGL/lib $X_LIBS"
+ elif test -d /opt/Mesa/lib ; then
X_CFLAGS="-I/opt/Mesa/include $X_CFLAGS"
X_LIBS="-L/opt/Mesa/lib $X_LIBS"
fi
+
if test -d /opt/xpm/lib/X11 ; then
X_CFLAGS="-I/opt/xpm/include $X_CFLAGS"
X_LIBS="-L/opt/xpm/lib/X11 $X_LIBS"
# Some versions of Slowlaris Motif require -lgen. But not all. Why?
AC_CHECK_LIB(gen, regcmp, [X_LIBS="$X_LIBS -lgen"])
fi
+
+ ;;
+ *-darwin*)
+
+ # On MacOS X (10.x with "fink"), many things are under /sw/.
+ #
+ if test -d /sw/include ; then
+ X_CFLAGS="-I/sw/include $X_CFLAGS"
+ X_LIBS="-L/sw/lib $X_LIBS"
+ fi
;;
esac])
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- AC_CHECK_HEADER([$1], [$2])
+ AC_CHECK_HEADER([$1],[$2],[$3],[$4])
CPPFLAGS="$ac_save_CPPFLAGS"])
# Like AC_EGREP_HEADER, but it uses the already-computed -I directories.
# random compiler setup
AC_CANONICAL_HOST
AC_PROG_CC_ANSI
+AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE
+AC_NO_OBJECTIVE_C
AC_PROG_CPP
AC_C_CONST
AC_C_INLINE
+AC_EXEEXT
AC_DEMAND_BC
# stuff for Makefiles
AC_PROG_INSTALL_DIRS
AC_PROG_MAKE_SET
+# By default, autoconf sets INSTALL_SCRIPT to '${INSTALL_PROGRAM}'.
+# That's wrong: it should be set to '${INSTALL}', so that one can
+# implement the "install-strip" target properly (strip executables,
+# but do not try to strip scripts.)
+#
+INSTALL_SCRIPT='${INSTALL}'
+
# random libc stuff
AC_HEADER_STDC
AC_CHECK_HEADERS(unistd.h)
AC_HEADER_SYS_WAIT
AC_HEADER_DIRENT
AC_GETTIMEOFDAY_ARGS
-AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv)
+AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv sbrk)
-AC_CHECK_FUNCS(sigaction syslog realpath)
+AC_CHECK_FUNCS(sigaction syslog realpath setrlimit)
AC_CHECK_ICMP
AC_CHECK_ICMPHDR
AC_CHECK_HEADERS(crypt.h sys/select.h)
if test -z "$PERL" ; then
# don't let it be blank...
- PERL=/usr/local/bin/perl5
+ PERL=/usr/bin/perl
fi
AC_PATH_XTRA
AC_XPOINTER
+###############################################################################
+#
+# Gettext support
+#
+###############################################################################
+
+AC_PROG_INTLTOOL
+GETTEXT_PACKAGE=xscreensaver
+AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE")
+AC_DEFINE_UNQUOTED(PACKAGE, "$GETTEXT_PACKAGE")
+AC_SUBST(GETTEXT_PACKAGE)
+
+ALL_LINGUAS="ca da de es et fi fr hu it ja ko nl no pl pt pt_BR ru sk sv vi wa zh_CN zh_TW"
+AM_GLIB_GNU_GETTEXT
+
###############################################################################
#
###############################################################################
have_xmu=no
-AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes])
+AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes],,
+ [#include <stdlib.h>
+ #include <stdio.h>
+ #include <X11/Intrinsic.h>])
if test "$have_xmu" = no ; then
XMU_SRCS='$(UTILS_SRC)/xmu.c'
XMU_OBJS='$(UTILS_BIN)/xmu.o'
+ XMU_LIBS=''
else
XMU_SRCS=''
XMU_OBJS=''
- SAVER_LIBS="-lXmu $SAVER_LIBS"
- HACK_LIBS="-lXmu $HACK_LIBS"
- MOTIF_LIBS="-lXmu $MOTIF_LIBS"
- GTK_LIBS="-lXmu $GTK_LIBS"
+ XMU_LIBS='-lXmu'
AC_DEFINE(HAVE_XMU)
fi
###############################################################################
#
-# Handle the --enable-subdir option
+# Handle the --with-hackdir option
#
###############################################################################
-AC_ARG_ENABLE(subdir,[
+have_hackdir=yes
+with_hackdir_req=unspecified
+AC_ARG_WITH(hackdir,[
Installation options:
- --enable-subdir=DIR Put the demo programs in a subdirectory of \`bindir',
- instead of putting them in bindir itself. You can
- specify the name of the subdirectory. For example,
- \`--exec-prefix=/usr/local --enable-subdir=demos'
- would put xscreensaver in /usr/local/bin/, and would
- put the demos in /usr/local/bin/demos/. (If DIR
- begins with /, then bindir will not be prepended.)
+ --with-hackdir=DIR Where to install the hundreds of demo executables.
+ Default: \`PREFIX/lib/xscreensaver/'],
+ [with_hackdir="$withval"; with_hackdir_req="$withval"],[with_hackdir=yes])
- --disable-subdir Just put the demos in \`bindir' (this is the default.)
-],
- [enable_subdir="$enableval"],[enable_subdir=no])
-if test x"$enable_subdir" = xno; then
+if test x"$with_hackdir" = xyes; then
+ HACKDIR='${exec_prefix}/lib/xscreensaver'
+elif test x"$with_hackdir" = xno; then
HACKDIR='${bindir}'
-elif test x"$enable_subdir" = xyes -o x"$enable_subdir" = x ; then
- echo "error: must be a subdirectory name: --enable-subdir=$enable_subdir"
- exit 1
else
# there must be a better way than this...
- if test -z "`echo $enable_subdir | sed 's@^/.*@@'`" ; then
+ if test -z "`echo $with_hackdir | sed 's@^/.*@@'`" ; then
# absolute path
- HACKDIR=$enable_subdir
+ HACKDIR=$with_hackdir
else
# relative path
- HACKDIR='${bindir}/'$enable_subdir
+ HACKDIR="\${exec_prefix}$with_hackdir"
fi
fi
# canonicalize slashes.
HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+# This option used to be called --enable-subdir; make sure that is no longer
+# used, since configure brain-damagedly ignores unknown --enable options.
+
+obsolete_enable=
+AC_ARG_ENABLE(subdir,,[obsolete_enable=yes])
+if test -n "$obsolete_enable"; then
+ echo "error: the --enable-subdir option has been replaced with"
+ echo " the new --with-hackdir option; see \`configure --help'"
+ echo " for more information."
+ exit 1
+fi
+
+
+###############################################################################
+#
+# Handle the --with-configdir option
+#
+###############################################################################
+
+have_configdir=yes
+with_configdir_req=unspecified
+AC_ARG_WITH(configdir,
+[ --with-configdir=DIR Where to install the data files that describe each
+ of the display modes to the GUI.
+ Default: \`GNOMEPREFIX/control-center/screensavers/'
+ or \`PREFIX/lib/xscreensaver/config/', depending on
+ whether GNOME is available.
+],
+ [with_configdir="$withval"; with_configdir_req="$withval"],
+ [with_configdir=yes])
+
+if test x"$with_configdir" = xyes; then
+ # filled in later...
+ HACK_CONF_DIR=''
+elif test x"$with_configdir" = xno; then
+ echo "error: must be yes, or a pathname: --with-configdir=$with_configdir"
+ exit 1
+else
+ # there must be a better way than this...
+ if test -z "`echo $with_configdir | sed 's@^/.*@@'`" ; then
+ # absolute path
+ HACK_CONF_DIR=$with_configdir
+ else
+ # relative path
+ HACK_CONF_DIR="\${exec_prefix}$with_configdir"
+ fi
+fi
+
+
+
###############################################################################
#
if test "$with_sgi" = yes; then
AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
[have_sgi=yes
- AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)])
+ AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)],,
+ [#include <X11/Xlib.h>])
elif test "$with_sgi" != no; then
echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
HANDLE_X_PATH_ARG(with_mit, --with-mit-ext, MIT-SCREEN-SAVER)
if test "$with_mit" = yes; then
- AC_CHECK_X_HEADER(X11/extensions/scrnsaver.h, [have_mit=yes])
+ AC_CHECK_X_HEADER(X11/extensions/scrnsaver.h, [have_mit=yes],,
+ [#include <X11/Xlib.h>])
# Now check to see if it's really in the library; XF86Free-3.3 ships
# scrnsaver.h, but doesn't include the code in libXext.a, the idiots!
if test "$with_xidle" = yes; then
AC_CHECK_X_HEADER(X11/extensions/xidle.h,
[have_xidle=yes
- AC_DEFINE(HAVE_XIDLE_EXTENSION)])
+ AC_DEFINE(HAVE_XIDLE_EXTENSION)],,
+ [#include <X11/Xlib.h>])
elif test "$with_xidle" != no; then
echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
exit 1
if test "$with_sgivc" = yes; then
# first check for XSGIvc.h
- AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes])
+ AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes],,
+ [#include <X11/Xlib.h>])
# if that succeeded, then check for the -lXsgivc
if test "$have_sgivc" = yes; then
if test "$with_dpms" = yes; then
# first check for dpms.h
- AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes])
+ AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes],,
+ [#include <X11/Xlib.h>])
# if that succeeded, then check for the DPMS code in the libraries
if test "$have_dpms" = yes; then
# if that failed, look in -lXdpms (this is where it was in XFree86 3.x)
if test "$have_dpms" = no; then
AC_CHECK_X_LIB(Xdpms, DPMSInfo,
- [have_dpms=yes; SAVER_LIBS="$SAVER_LIBS -lXdpms"], [true],
+ [have_dpms=yes; XDPMS_LIBS="-lXdpms"], [true],
-lXext -lX11)
fi
fi
###############################################################################
#
-# Check for the XF86VMODE server extension.
+# Check for the XINERAMA server extension.
+#
+###############################################################################
+
+have_xinerama=no
+with_xinerama_req=unspecified
+AC_ARG_WITH(xinerama-ext,
+[ --with-xinerama-ext Include support for the XINERAMA extension.],
+ [with_xinerama="$withval"; with_xinerama_req="$withval"],[with_xinerama=yes])
+
+HANDLE_X_PATH_ARG(with_xinerama, --with-xinerama-ext, XINERAMA)
+
+if test "$with_xinerama" = yes; then
+
+ # first check for Xinerama.h
+ AC_CHECK_X_HEADER(X11/extensions/Xinerama.h, [have_xinerama=yes],,
+ [#include <X11/Xlib.h>])
+
+ # if that succeeded, then check for the XINERAMA code in the libraries
+ if test "$have_xinerama" = yes; then
+
+ # first look in -lXext
+ have_xinerama=no
+ AC_CHECK_X_LIB(Xext, XineramaQueryExtension, [have_xinerama=yes], [true],
+ -lXext -lX11)
+
+ # if that failed, look in -lXinerama (this is where it is in XFree86 4.1.)
+ if test "$have_xinerama" = no; then
+ AC_CHECK_X_LIB(Xinerama, XineramaQueryExtension,
+ [have_xinerama=yes; SAVER_LIBS="$SAVER_LIBS -lXinerama"],
+ [true], -lXext -lX11)
+ fi
+ fi
+
+ # if that succeeded, then we've really got it.
+ if test "$have_xinerama" = yes; then
+ AC_DEFINE(HAVE_XINERAMA)
+ fi
+
+elif test "$with_xinerama" != no; then
+ echo "error: must be yes or no: --with-xinerama-ext=$with_xinerama"
+ exit 1
+fi
+
+
+###############################################################################
+#
+# Check for the XF86VMODE server extension (for virtual screens.)
#
###############################################################################
if test "$with_xf86vmode" = yes; then
# first check for xf86vmode.h
- AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86vmode=yes])
+ AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86vmode=yes],,
+ [#include <X11/Xlib.h>])
# if that succeeded, then check for the -lXxf86vm
if test "$have_xf86vmode" = yes; then
fi
+###############################################################################
+#
+# Check for the XF86VMODE server extension (for gamma fading.)
+#
+###############################################################################
+
+have_xf86gamma=no
+have_xf86gamma_ramp=no
+with_xf86gamma_req=unspecified
+AC_ARG_WITH(xf86gamma-ext,
+[ --with-xf86gamma-ext Include support for XFree86 gamma fading.],
+ [with_xf86gamma="$withval"; with_xf86gamma_req="$withval"],
+ [with_xf86gamma=yes])
+
+HANDLE_X_PATH_ARG(with_xf86gamma, --with-xf86gamma-ext, xf86gamma)
+
+if test "$with_xf86gamma" = yes; then
+
+ # first check for xf86vmode.h, if we haven't already
+ if test "$have_xf86vmode" = yes; then
+ have_xf86gamma=yes
+ else
+ AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86gamma=yes],,
+ [#include <X11/Xlib.h>])
+ fi
+
+ # if that succeeded, then check for the -lXxf86vm
+ if test "$have_xf86gamma" = yes; then
+ have_xf86gamma=no
+ AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGamma,
+ [have_xf86gamma=yes],
+ [true], -lXext -lX11)
+ fi
+
+ # check for the Ramp versions of the functions too.
+ if test "$have_xf86gamma" = yes; then
+ have_xf86gamma_ramp=no
+ AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGammaRamp,
+ [have_xf86gamma_ramp=yes],
+ [true], -lXext -lX11)
+ fi
+
+ # if those tests succeeded, then we've really got the functions.
+ if test "$have_xf86gamma" = yes; then
+ AC_DEFINE(HAVE_XF86VMODE_GAMMA)
+ fi
+
+ if test "$have_xf86gamma_ramp" = yes; then
+ AC_DEFINE(HAVE_XF86VMODE_GAMMA_RAMP)
+ fi
+
+ # pull in the lib, if we haven't already
+ if test "$have_xf86gamma" = yes -a "$have_xf86vmode" = no; then
+ SAVER_LIBS="$SAVER_LIBS -lXxf86vm"
+ fi
+
+elif test "$with_xf86gamma" != no; then
+ echo "error: must be yes or no: --with-xf86gamma-ext=$with_xf86vmode"
+ exit 1
+fi
+
+
+###############################################################################
+#
+# Check for XF86MiscSetGrabKeysState (but only bother if we are already
+# using other XF86 stuff.)
+#
+###############################################################################
+
+have_xf86miscsetgrabkeysstate=no
+if test "$have_xf86gamma" = yes -o "$have_xf86vmode" = yes; then
+ AC_CHECK_X_LIB(Xxf86misc, XF86MiscSetGrabKeysState,
+ [have_xf86miscsetgrabkeysstate=yes],
+ [true], -lXext -lX11)
+ if test "$have_xf86miscsetgrabkeysstate" = yes ; then
+ SAVER_LIBS="$SAVER_LIBS -lXxf86misc"
+ AC_DEFINE(HAVE_XF86MISCSETGRABKEYSSTATE)
+ fi
+fi
+
+
###############################################################################
#
# Check for HP XHPDisableReset and XHPEnableReset.
#
###############################################################################
+AC_MSG_CHECKING([for XHPDisableReset in X11/XHPlib.h])
AC_EGREP_X_HEADER(XHPDisableReset, X11/XHPlib.h,
[AC_DEFINE(HAVE_XHPDISABLERESET)
- SAVER_LIBS="-lXhp11 $SAVER_LIBS"])
+ SAVER_LIBS="-lXhp11 $SAVER_LIBS"
+ AC_MSG_RESULT(yes)],
+ [AC_MSG_RESULT(no)])
###############################################################################
Screen locking options:
--enable-locking Compile in support for locking the display.
- --disable-locking Do not allow locking at all.
-],
+ --disable-locking Do not allow locking at all.],
[enable_locking="$enableval"],[enable_locking=yes])
if test "$enable_locking" = yes; then
true
#fi
-
###############################################################################
#
# Check for PAM.
if test "$have_kerberos5" = yes ; then
# from Matt Knopp <mhat@infocalypse.netlag.com>
# (who got it from amu@mit.edu)
- PASSWD_LIBS="$PASSWD_LIBS -lkrb4 -ldes425 -lkrb5 -lk5crypto -lcrypt -lcom_err"
+
+ PASSWD_LIBS="$PASSWD_LIBS -lkrb4 -ldes425 -lkrb5 -lk5crypto -lcom_err"
+
+ # jwz: MacOS X uses -lkrb5, but not -lcrypt
+ AC_CHECK_X_LIB(crypt, crypt, [PASSWD_LIBS="$PASSWD_LIBS -lcrypt"])
+
elif test "$have_kerberos" = yes ; then
- # from Tim Showalter <tjs+@andrew.cmu.edu>
- PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes"
+ # from Tim Showalter <tjs@psaux.com> for FreeBSD 4.2
+ PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes -lcom_err"
fi
if test "$have_kerberos" = yes ; then
AC_ARG_WITH(motif,[
User interface options:
- --with-motif Use the Motif toolkit for the user interface.],
+ --with-motif Use the Motif toolkit for the user interface
+ (not recommended.)],
[with_motif="$withval"; with_motif_req="$withval"],[with_motif=yes])
HANDLE_X_PATH_ARG(with_motif, --with-motif, Motif)
AC_CHECK_X_HEADER(Xm/Xm.h,
[have_motif=yes
AC_DEFINE(HAVE_MOTIF)
- MOTIF_LIBS="$MOTIF_LIBS -lXm"])
+ MOTIF_LIBS="$MOTIF_LIBS -lXm"],,
+ [#include <stdlib.h>
+ #include <stdio.h>
+ #include <X11/Intrinsic.h>])
fi
if test "$have_motif" = yes; then
- AC_CHECK_X_HEADER(Xm/ComboBox.h, [AC_DEFINE(HAVE_XMCOMBOBOX)])
+ AC_CHECK_X_HEADER(Xm/ComboBox.h, [AC_DEFINE(HAVE_XMCOMBOBOX)],,
+ [#include <stdlib.h>
+ #include <stdio.h>
+ #include <X11/Intrinsic.h>])
fi
###############################################################################
have_gtk=no
+have_gtk2=no
with_gtk_req=unspecified
AC_ARG_WITH(gtk,
[ --with-gtk Use the Gtk toolkit for the user interface.],
have_gnome=no
with_gnome_req=unspecified
AC_ARG_WITH(gnome,
-[ --with-gnome Include support for the Gnome Control Center.],
+[ --with-gnome Include support for the Gnome 1.x Control Center.
+ (This option is not needed with GTK 2.x / Gnome 2.x.)
+],
[with_gnome="$withval"; with_gnome_req="$withval"],[with_gnome=yes])
# if --with-gnome=/directory/ was specified, remember that directory so that
exit 1
fi
+parse_gtk_version_string() {
+ # M4 sucks!!
+ changequote(X,Y)
+ maj=`echo $ac_gtk_version_string | sed -n 's/\..*//p'`
+ min=`echo $ac_gtk_version_string | sed -n 's/[^.]*\.\([^.]*\).*/\1/p'`
+ changequote([,])
+ ac_gtk_version=`echo "$maj * 1000 + $min" | bc`
+ if test -z "$ac_gtk_version"; then
+ ac_gtk_version=unknown
+ ac_gtk_version_string=unknown
+ fi
+}
+
jurassic_gtk=no
+gtk2_halfassed=no
+
if test "$with_gtk" = yes; then
have_gtk=no
- # if the user specified --with-gtk=/foo/ then look in /foo/bin/
- # for glib-config and gtk-config.
+ # if the user specified --with-gtk=/foo/ or --with-gnome=/foo/ then
+ # look in /foo/bin/ for glib-config, gtk-config, and gnome-config.
#
gtk_path="$PATH"
if test ! -z "$gtk_dir"; then
# canonicalize slashes.
- gtk_dir=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
- gtk_path="$gtk_dir:$gtk_path"
+ foo=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
+ gtk_path="$foo:$gtk_path"
fi
- if test ! -z "gnome_dir"; then
+ if test ! -z "$gnome_dir"; then
# canonicalize slashes.
- gnome_dir=`echo "${gnome_dir}/bin" | sed 's@//*@/@g'`
- gtk_path="$gnome_dir:$gtk_path"
+ foo=`echo "${gnome_dir}/bin" | sed 's@//*@/@g'`
+ gtk_path="$foo:$gtk_path"
fi
- AC_PATH_PROGS(glib_config, glib12-config glib-config,, $gtk_path)
- AC_PATH_PROGS(gtk_config, gtk12-config gtk-config,, $gtk_path)
+ AC_PATH_PROGS(pkg_config, pkg-config,, $gtk_path)
- if test "$with_gnome" = yes; then
- AC_PATH_PROGS(gnome_config, gnome-config,, $gtk_path)
- fi
+ if test -n "$pkg_config" ; then
+ #
+ # the new way...
+ # run pkg-config based tests.
+ #
- if test -n "$glib_config" -a -n "gtk_config" ; then
- have_gtk=yes
- if test "$with_gnome" = yes -a -n "$gnome_config" ; then
- have_gnome=yes
+ pkgs=''
+ pkg_check_version() {
+ if test "$ok" = yes ; then
+ req="$1"
+ min="$2"
+ AC_MSG_CHECKING(for $req)
+ if $pkg_config --exists "$req" ; then
+ vers=`$pkg_config --modversion "$req"`
+ if $pkg_config --exists "$req >= $min" ; then
+ AC_MSG_RESULT($vers)
+ pkgs="$pkgs $req"
+ return 1
+ else
+ AC_MSG_RESULT($vers (wanted >= $min))
+ ok=no
+ return 0
+ fi
+ else
+ AC_MSG_RESULT(no)
+ ok=no
+ return 0
+ fi
+ fi
+ }
+
+ ok="yes"
+ pkg_check_version gtk+-2.0 2.0.1 ; ac_gtk_version_string="$vers"
+ pkg_check_version gmodule-2.0 2.0.0
+ pkg_check_version libxml-2.0 2.4.6
+ pkg_check_version libglade-2.0 1.99.0
+ have_gtk="$ok"
+
+ if test "$have_gtk" = yes; then
+ have_gtk2=yes
+ AC_DEFINE(HAVE_GTK2)
+ else
+ if test -n "$ac_gtk_version_string" ; then
+ gtk2_halfassed="$ac_gtk_version_string"
+ gtk2_halfassed_lib="$req"
+ fi
fi
- fi
- if test "$have_gtk" = yes; then
- AC_CACHE_CHECK([Gtk version number], ac_cv_gtk_version_string,
- [ac_cv_gtk_version_string=`$gtk_config --version`])
- ac_gtk_version_string=$ac_cv_gtk_version_string
- # M4 sucks!!
- changequote(X,Y)
- maj=`echo $ac_gtk_version_string | sed -n 's/\..*//p'`
- min=`echo $ac_gtk_version_string | sed -n 's/[^.]*\.\([^.]*\).*/\1/p'`
- changequote([,])
- ac_gtk_version=`echo "$maj * 1000 + $min" | bc`
- if test -z "$ac_gtk_version"; then
- ac_gtk_version=unknown
- ac_gtk_version_string=unknown
+ if test "$have_gtk" = no; then
+ #
+ # we don't have GTK 2. Let's look for GTK 1.
+ #
+ pkgs=''
+ ok="yes"
+ pkg_check_version gtk+ 1.2 ; ac_gtk_version_string="$vers"
+ pkg_check_version glib 1.0
+ have_gtk="$ok"
+
+ # Now check for Gnome...
+ #
+ if test "$have_gtk" = yes -a "$with_gnome" = yes; then
+ old_pkgs="$pkgs"
+ ok=yes
+ pkg_check_version capplet 1.0
+ pkg_check_version gnomeui 1.0
+ pkg_check_version gdk_pixbuf 0.1
+ have_gnome="$ok"
+
+ if test "$have_gnome" = no; then
+ pkgs="$old_pkgs"
+ else
+ AC_DEFINE(HAVE_CRAPPLET)
+ fi
+ fi
fi
- if test "$ac_gtk_version" = "unknown" || test "$ac_gtk_version" -lt 1002
- then
- have_gtk=no
+
+ if test "$have_gtk" = yes; then
+ parse_gtk_version_string
+ jurassic_gtk=no
+ else
have_gnome=no
- jurassic_gtk=yes
fi
- fi
- if test "$have_gtk" = yes; then
- AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
- [ac_cv_gtk_config_cflags=`$gtk_config --cflags`])
- AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
- [ac_cv_gtk_config_libs=`$gtk_config --libs`])
- fi
- ac_gtk_config_cflags=$ac_cv_gtk_config_cflags
- ac_gtk_config_libs=$ac_cv_gtk_config_libs
+ if test "$have_gtk" = yes; then
+ AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
+ [ac_cv_gtk_config_cflags=`$pkg_config --cflags $pkgs`])
+ AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
+ [ac_cv_gtk_config_libs=`$pkg_config --libs $pkgs`])
+ fi
+ ac_gtk_config_cflags=$ac_cv_gtk_config_cflags
+ ac_gtk_config_libs=$ac_cv_gtk_config_libs
- # Check for Gnome Capplet support.
- #
- if test "$have_gnome" = yes -a "$have_gtk" = yes; then
- gnome_config_libs="capplet gnomeui"
- AC_MSG_CHECKING(for Gnome capplet includes)
- AC_CACHE_VAL(ac_cv_gnome_config_cflags,
- [if ( $gnome_config --cflags $gnome_config_libs 2>&1 >/dev/null | \
- grep Unknown >/dev/null ) ; then
- ac_cv_gnome_config_cflags=''
- else
- ac_cv_gnome_config_cflags=`$gnome_config --cflags $gnome_config_libs`
- fi])
- ac_gnome_config_cflags=$ac_cv_gnome_config_cflags
- if test "$ac_gnome_config_cflags" = "" ; then
- have_gnome=no
- AC_MSG_RESULT(no)
- else
- AC_MSG_RESULT($ac_gnome_config_cflags)
+ ac_gnome_config_cflags=$ac_gtk_config_cflags
+ ac_gnome_config_libs=$ac_gtk_config_libs
+
+ else
+ #
+ # the old way...
+ # run {gnome,gtk}-config based tests.
+ #
+
+ AC_PATH_PROGS(glib_config, glib12-config glib-config,, $gtk_path)
+ AC_PATH_PROGS(gtk_config, gtk12-config gtk-config,, $gtk_path)
+
+ if test "$with_gnome" = yes; then
+ AC_PATH_PROGS(gnome_config, gnome-config,, $gtk_path)
fi
- fi
- if test "$have_gnome" = yes -a "$have_gtk" = yes; then
- AC_MSG_CHECKING(for Gnome capplet libs)
- AC_CACHE_VAL(ac_cv_gnome_config_libs,
- [if ( $gnome_config --libs $gnome_config_libs 2>&1 >/dev/null |
- grep Unknown >/dev/null ) ; then
- ac_cv_gnome_config_libs=''
- else
- ac_cv_gnome_config_libs=`$gnome_config --libs $gnome_config_libs`
- fi])
- ac_gnome_config_libs=$ac_cv_gnome_config_libs
- if test "$ac_gnome_config_libs" = "" ; then
- have_gnome=no
- AC_MSG_RESULT(no)
- else
- AC_MSG_RESULT($ac_gnome_config_libs)
+ if test -n "$glib_config" -a -n "$gtk_config" ; then
+ have_gtk=yes
+ if test "$with_gnome" = yes -a -n "$gnome_config" ; then
+ have_gnome=yes
+ fi
+ fi
+
+ if test "$have_gtk" = yes; then
+ AC_CACHE_CHECK([Gtk version number], ac_cv_gtk_version_string,
+ [ac_cv_gtk_version_string=`$gtk_config --version`])
+ ac_gtk_version_string=$ac_cv_gtk_version_string
+ parse_gtk_version_string
+ fi
+
+ if test "$have_gtk" = yes; then
+ if test "$ac_gtk_version" = "unknown" || test "$ac_gtk_version" -lt 1002
+ then
+ have_gtk=no
+ have_gnome=no
+ jurassic_gtk=yes
+ fi
+ fi
+
+ if test "$have_gtk" = yes; then
+ AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
+ [ac_cv_gtk_config_cflags=`$gtk_config --cflags`])
+ AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
+ [ac_cv_gtk_config_libs=`$gtk_config --libs`])
+ fi
+ ac_gtk_config_cflags=$ac_cv_gtk_config_cflags
+ ac_gtk_config_libs=$ac_cv_gtk_config_libs
+
+ # Check for Gnome Capplet support.
+ # Note that this is only needed with Gnome 1.x, not Gnome 2.x.
+ # In a Gnome 2.x world, libcapplet will not exist.
+ # (In fact, this likely won't even be checked, since in a Gnome 2.x
+ # world, we will probably be up in the "$pkg_config" branch instead
+ # of here in the "$gnome_config" branch.)
+ #
+ if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+ gnome_config_libs="gtk capplet gnomeui gdk_pixbuf"
+ AC_MSG_CHECKING(for Gnome capplet includes)
+ AC_CACHE_VAL(ac_cv_gnome_config_cflags,
+ [if ( $gnome_config --cflags $gnome_config_libs 2>&1 | \
+ grep Unknown >/dev/null ) ; then
+ ac_cv_gnome_config_cflags=''
+ else
+ ac_cv_gnome_config_cflags=`$gnome_config --cflags $gnome_config_libs`
+ fi])
+ ac_gnome_config_cflags=$ac_cv_gnome_config_cflags
+ if test "$ac_gnome_config_cflags" = "" ; then
+ have_gnome=no
+ AC_MSG_RESULT(no)
+ else
+ AC_MSG_RESULT($ac_gnome_config_cflags)
+ fi
+ fi
+
+ if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+ AC_MSG_CHECKING(for Gnome capplet libs)
+ AC_CACHE_VAL(ac_cv_gnome_config_libs,
+ [if ( $gnome_config --libs $gnome_config_libs 2>&1 |
+ grep Unknown >/dev/null ) ; then
+ ac_cv_gnome_config_libs=''
+ else
+ ac_cv_gnome_config_libs=`$gnome_config --libs $gnome_config_libs`
+ fi])
+ ac_gnome_config_libs=$ac_cv_gnome_config_libs
+ if test "$ac_gnome_config_libs" = "" ; then
+ have_gnome=no
+ AC_MSG_RESULT(no)
+ else
+ AC_MSG_RESULT($ac_gnome_config_libs)
+ fi
+ fi
+
+ # If we have Gnome, then override the gtk-config values with
+ # the gnome-config values.
+ #
+ if test "$have_gnome" = yes -a "$have_gtk" = yes; then
+ ac_gtk_config_cflags=$ac_gnome_config_cflags
+ ac_gtk_config_libs=$ac_gnome_config_libs
+ AC_DEFINE(HAVE_CRAPPLET)
fi
+
+ fi # end of {gnome,gtk}-config based tests
+
+ if test "$have_gtk" = yes -a "$have_gtk2" = no; then
+ # check for this function that was not in libcapplet 1.2.
+ # (only needed in Gnome/Gtk 1.x, not Gnome/Gtk 2.x)
+ AC_CHECK_X_LIB(capplet, capplet_widget_changes_are_immediate,
+ [AC_DEFINE(HAVE_CRAPPLET_IMMEDIATE)], [true],
+ $ac_gnome_config_libs)
fi
+
GNOME_DATADIR=""
- if test "$have_gnome" = yes -a "$have_gtk" = yes; then
- GNOME_DATADIR=`$gnome_config --datadir`
+ if test "$have_gtk" = yes; then
+ if test -n "$pkg_config"; then
+ if test "$have_gtk2" = yes; then
+ GNOME_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
+ else
+ GNOME_DATADIR=`$pkg_config --variable=prefix gtk+`
+ fi
+ else
+ GNOME_DATADIR=`$gtk_config --prefix`
+ fi
+ GNOME_DATADIR="$GNOME_DATADIR/share"
fi
-
- # If we have Gnome, then override the gtk-config values with
- # the gnome-config values.
- #
- if test "$have_gnome" = yes -a "$have_gtk" = yes; then
- ac_gtk_config_cflags=$ac_gnome_config_cflags
- ac_gtk_config_libs=$ac_gnome_config_libs
- AC_DEFINE(HAVE_CRAPPLET)
+ # .desktop files go in different places in Gnome 1.x and Gnome 2.x...
+ if test "$have_gtk2" = yes; then
+ GNOME_PANELDIR='$(GNOME_PANELDIR2)'
+ else
+ GNOME_PANELDIR='$(GNOME_PANELDIR1)'
fi
INCLUDES="$INCLUDES $ac_gtk_config_cflags"
GTK_LIBS="$GTK_LIBS $ac_gtk_config_libs"
AC_DEFINE(HAVE_GTK)
+
+ if test "$have_gtk2" = yes; then
+ GTK_EXTRA_OBJS=""
+ else
+ GTK_EXTRA_OBJS="\$(GTK_EXTRA_OBJS)"
+ fi
fi
fi
+# Check for the Gnome Help Browser.
+#
+if test "$have_gtk" = yes; then
+ AC_CHECK_PROGS(have_gnome_help, yelp gnome-help-browser, no)
+ if test "$have_gnome_help" != no; then
+ have_gnome_help=yes
+ fi
+fi
+
+
###############################################################################
#
-# Checking whether Motif is really Lesstif.
+# Check for -lxml
#
###############################################################################
-have_lesstif=no
-if test "$have_motif" = yes ; then
- AC_CACHE_CHECK([whether Motif is really LessTif],
- ac_cv_have_lesstif,
- [AC_TRY_X_COMPILE([#include <Xm/Xm.h>],
- [long vers = LesstifVersion;],
- [ac_cv_have_lesstif=yes],
- [ac_cv_have_lesstif=no])])
- have_lesstif=$ac_cv_have_lesstif
+have_xml=no
+with_xml_req=unspecified
+xml_halfassed=no
+AC_ARG_WITH(xml,
+[ --with-xml The XML toolkit is needed for some parts of
+ the Gtk interface. Without it, the configuration
+ interface will be much less featureful.],
+[with_xml="$withval"; with_xml_req="$withval"],[with_xml=yes])
+
+# if --with-xml=/directory/ was specified, remember that directory so that
+# we can also look for the `xml-config' program in that directory.
+case "$with_xml" in
+ /*)
+ xml_dir="$with_xml"
+ ;;
+ *)
+ xml_dir=""
+ ;;
+esac
+
+HANDLE_X_PATH_ARG(with_xml, --with-xml, XML)
+
+if test "$with_xml" != yes -a "$with_xml" != no ; then
+ echo "error: must be yes or no: --with-xml=$with_xml"
+ exit 1
fi
+if test "$with_xml" = yes; then
+ have_xml=no
+ have_old_xml=no
-lesstif_version=unknown
-lesstif_version_string=unknown
+ # if the user specified --with-gtk=/foo/ or --with-gnome=/foo/ then
+ # look in /foo/bin/ for for xml-config.
+ #
+ xml_path="$PATH"
-if test "$have_lesstif" = yes ; then
- ltv=unknown
- echo unknown > conftest-lt
- AC_CACHE_CHECK([LessTif version number],
- ac_cv_lesstif_version_string,
- [AC_TRY_X_RUN([#include <stdio.h>
- #include <Xm/Xm.h>
- int main() {
- FILE *f = fopen("conftest-lt", "w");
- if (!f) exit(1);
- fprintf(f, "%d %d.%d\n", LesstifVersion,
- LESSTIF_VERSION, LESSTIF_REVISION);
+ if test ! -z "$gtk_dir"; then
+ # canonicalize slashes.
+ foo=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
+ xml_path="$foo:$xml_path"
+ fi
+
+ if test ! -z "$gnome_dir"; then
+ # canonicalize slashes.
+ foo=`echo "${gnome_dir}/bin" | sed 's@//*@/@g'`
+ xml_path="$foo:$xml_path"
+ fi
+
+ if test -n "$pkg_config" ; then
+ #
+ # the new way...
+ # run pkg-config based tests.
+ #
+ pkgs=""
+ ok="yes"
+
+ # If we have Gtk 2.x, then *only* XML 2.x will work.
+ # If we have Gtk 1.x, or don't have Gtk at all, then
+ # either XML 1.x or 2.x will work.
+
+ # First check for XML 2.x.
+ #
+ pkg_check_version libxml-2.0 2.4.6
+
+ # If that didn't work (we don't have XML 2.x) and we *don't* have
+ # Gtk 2.x, then check to see if we have XML 1.x
+ #
+ if test "$ok" = no -a "$have_gtk2" = no; then
+ ok=yes
+ pkg_check_version libxml 1.0
+ fi
+
+ have_xml="$ok"
+
+ if test "$have_xml" = yes; then
+ AC_CACHE_CHECK([for XML includes], ac_cv_xml_config_cflags,
+ [ac_cv_xml_config_cflags=`$pkg_config --cflags $pkgs`])
+ AC_CACHE_CHECK([for XML libs], ac_cv_xml_config_libs,
+ [ac_cv_xml_config_libs=`$pkg_config --libs $pkgs`])
+ ac_xml_config_cflags=$ac_cv_xml_config_cflags
+ ac_xml_config_libs=$ac_cv_xml_config_libs
+ fi
+
+ else
+ #
+ # the old way...
+ # run {xml2,xml}-config based tests.
+ #
+
+ AC_PATH_PROGS(xml_config, xml2-config xml-config,, $xml_path)
+
+ # If we found the xml-config program, run it to get flags.
+ #
+ if test -n "$xml_config" ; then
+ AC_CACHE_CHECK([for XML includes], ac_cv_xml_config_cflags,
+ [ac_cv_xml_config_cflags=`$xml_config --cflags`])
+ AC_CACHE_CHECK([for XML libs], ac_cv_xml_config_libs,
+ [ac_cv_xml_config_libs=`$xml_config --libs`])
+ ac_xml_config_cflags=$ac_cv_xml_config_cflags
+ ac_xml_config_libs=$ac_cv_xml_config_libs
+ fi
+
+ ac_save_xml_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $ac_xml_config_cflags"
+
+ # first try <libxml/parser.h> which is the new way...
+ #
+ AC_CHECK_X_HEADER(libxml/xmlIO.h, [have_xml=yes],,
+ [#include <libxml/parser.h>])
+
+ # if that didn't work, then try just <parser.h> which is the old way...
+ #
+ if test "$have_xml" = no; then
+ AC_CHECK_X_HEADER(xmlIO.h, [have_xml=yes; have_old_xml=yes],,
+ [#include <parser.h>])
+ fi
+
+ CPPFLAGS="$ac_save_xml_CPPFLAGS"
+ fi
+
+
+ have_zlib=no
+ if test "$have_xml" = yes; then
+ # we have the XML headers; now make sure zlib is around.
+ # yes, it's stupid we have to do this too, but there is
+ # dependency screwage in Gnome.
+ AC_CHECK_X_LIB(z, zlibVersion, [have_zlib=yes])
+ if test "$have_zlib" = no; then
+ xml_halfassed=yes
+ have_xml=no
+ fi
+ fi
+
+ if test "$have_xml" = yes; then
+ # we have the header, now check for the library
+ have_xml=no
+ xml_halfassed=yes
+ AC_CHECK_X_LIB(c, xmlParseChunk,
+ [have_xml=yes
+ xml_halfassed=no
+ XML_LIBS="$ac_xml_config_libs"
+ AC_DEFINE(HAVE_XML)],
+ [true],
+ $ac_xml_config_libs)
+ fi
+
+ if test "$have_xml" = yes; then
+ INCLUDES="$INCLUDES $ac_xml_config_cflags"
+ GTK_LIBS="$GTK_LIBS $ac_xml_config_libs"
+ AC_DEFINE(HAVE_XML)
+ if test "$have_old_xml" = yes; then
+ AC_DEFINE(HAVE_OLD_XML_HEADERS)
+ fi
+ fi
+
+fi
+
+
+###############################################################################
+#
+# Checking whether Motif is really Lesstif.
+#
+###############################################################################
+
+have_lesstif=no
+if test "$have_motif" = yes ; then
+ AC_CACHE_CHECK([whether Motif is really LessTif],
+ ac_cv_have_lesstif,
+ [AC_TRY_X_COMPILE([#include <Xm/Xm.h>],
+ [long vers = LesstifVersion;],
+ [ac_cv_have_lesstif=yes],
+ [ac_cv_have_lesstif=no])])
+ have_lesstif=$ac_cv_have_lesstif
+fi
+
+
+lesstif_version=unknown
+lesstif_version_string=unknown
+
+if test "$have_lesstif" = yes ; then
+ ltv=unknown
+ echo unknown > conftest-lt
+ AC_CACHE_CHECK([LessTif version number],
+ ac_cv_lesstif_version_string,
+ [AC_TRY_X_RUN([#include <stdio.h>
+ #include <Xm/Xm.h>
+ int main() {
+ FILE *f = fopen("conftest-lt", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d %d.%d\n", LesstifVersion,
+ LESSTIF_VERSION, LESSTIF_REVISION);
fclose(f);
exit(0);
}],
if test "$with_gl" = yes; then
AC_CHECK_X_HEADER(GL/gl.h, have_gl=yes, have_gl=no)
if test "$have_gl" = yes ; then
- AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no)
+ AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no,
+ [#include <GL/gl.h>])
fi
# If we have the headers, try and figure out which vendor it's from.
#
AC_CACHE_CHECK([whether GL is really MesaGL], ac_cv_have_mesa_gl,
[ac_cv_have_mesa_gl=no
- AC_EGREP_X_HEADER(Mesa, GL/glx.h, [ac_cv_have_mesa_gl=yes])
+ AC_EGREP_X_HEADER(Mesa|MESA, GL/glx.h, [ac_cv_have_mesa_gl=yes])
])
ac_have_mesa_gl=$ac_cv_have_mesa_gl
#line __oline__ "configure"
#include "confdefs.h"
#include <GL/gl.h>
+#ifndef MESA_MAJOR_VERSION
+# include <GL/xmesa.h>
+# ifdef XMESA_MAJOR_VERSION
+ /* Around Mesa 3.2, they took out the Mesa version number, so instead,
+ we have to check the XMesa version number (the number of the X protocol
+ support, which seems to be the same as the Mesa version number.)
+ */
+# define MESA_MAJOR_VERSION XMESA_MAJOR_VERSION
+# define MESA_MINOR_VERSION XMESA_MINOR_VERSION
+# else
+ /* Oh great. Some time after 3.4, they took out the xmesa.h header file,
+ so we have no way of telling what version of Mesa this is at all.
+ So, we'll guess that the osmesa version (the "offscreen protocol")
+ is less than or equal to the real mesa version number. Except that
+ if OSmesa is 3.3, assume at least Mesa 3.4, since OSmesa was 3.3 in
+ Mesa 3.4. And Mesa 3.3 had xmesa.h. What a complete load of shit!
+ */
+# include <GL/osmesa.h>
+# define MESA_MAJOR_VERSION OSMESA_MAJOR_VERSION
+# define MESA_MINOR_VERSION OSMESA_MINOR_VERSION or newer, probably?
+# if OSMESA_MAJOR_VERSION == 3 && OSMESA_MINOR_VERSION == 3
+# undef MESA_MINOR_VERSION
+# define MESA_MINOR_VERSION 4 or newer, probably?
+# endif
+# endif
+#endif
configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
EOF
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- # M4 sucks!!
+ mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC | grep configure:`
+
+ # M4 sucks!!
changequote(X,Y)
- mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC | sed -n \
- 's/^configure:.*\([0-9][0-9]*\).*\([0-9][0-9]*\).*$/\1.\2/p'`
+ mglv=`echo "$mglv" | sed -n \
+ 's/^configure: *\([0-9][0-9]*\) *\([0-9].*\)$/\1.\2/p'`
changequote([,])
rm -f conftest.$ac_ext
ac_mesagl_version=unknown
ac_mesagl_version_string=unknown
else
- ac_mesagl_version_string=$mglv
- maj=`echo $mglv | sed -n 's/\..*//p'`
- min=`echo $mglv | sed -n 's/.*\.//p'`
+ ac_mesagl_version_string="$mglv"
+ # M4 sucks!!
+ changequote(X,Y)
+ maj=`echo "$mglv" | sed -n 's/^\([0-9][0-9]*\)\..*$/\1/p'`
+ min=`echo "$mglv" | sed -n 's/^.*\.\([0-9][0-9]*\).*$/\1/p'`
+ changequote([,])
ac_mesagl_version=`echo "$maj * 1000 + $min" | bc`
if test -z "$ac_mesagl_version"; then
ac_mesagl_version=unknown
GLE_LIBS=""
-if test "$with_gle" = yes; then
+if test "$have_gl" = no ; then
+ true
+elif test "$with_gle" = yes; then
- AC_CHECK_X_HEADER(GL/gle.h, have_gle3=yes, have_gle3=no)
+ AC_CHECK_X_HEADER(GL/gle.h, have_gle3=yes, have_gle3=no,
+ [#include <GL/gl.h>])
if test "$have_gle3" = yes ; then
have_gle=yes;
else
- AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no)
+ AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no,
+ [#include <GL/gl.h>])
if test "$have_gle" = yes ; then
- AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no)
+ AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no,
+ [#include <GL/gl.h>])
fi
fi
have_xpm=no
with_xpm_req=unspecified
AC_ARG_WITH(xpm,
-[ --with-xpm Include support for XPM files in some demos.],
+[ --with-xpm Include support for XPM files in some demos.
+ (Not needed if Pixbuf is used.)],
[with_xpm="$withval"; with_xpm_req="$withval"],[with_xpm=yes])
HANDLE_X_PATH_ARG(with_xpm, --with-xpm, XPM)
AC_CHECK_X_HEADER(X11/xpm.h,
[have_xpm=yes
AC_DEFINE(HAVE_XPM)
- XPM_LIBS="-lXpm"])
+ XPM_LIBS="-lXpm"],,
+ [#include <X11/Xlib.h>])
elif test "$with_xpm" != no; then
echo "error: must be yes or no: --with-xpm=$with_xpm"
exit 1
fi
fi
+###############################################################################
+#
+# Check for -lgdk_pixbuf.
+#
+###############################################################################
+
+have_gdk_pixbuf=no
+with_gdk_pixbuf_req=unspecified
+AC_ARG_WITH(pixbuf,
+[ --with-pixbuf Include support for the GDK-Pixbuf library in some
+ demos, which will make it possible for them to read
+ GIF, JPEG, and PNG files as well. (The path here is
+ ignored if GTK 2.x is being used.)],
+ [with_gdk_pixbuf="$withval"; with_gdk_pixbuf_req="$withval"],
+ [with_gdk_pixbuf=yes])
+
+# if --with-pixbuf=/directory/ was specified, remember that directory so that
+# we can also look for the `gdk-pixbuf-config' program in that directory.
+case "$with_gdk_pixbuf" in
+ /*)
+ gdk_pixbuf_dir="$with_gdk_pixbuf"
+ ;;
+ *)
+ gdk_pixbuf_dir=""
+ ;;
+esac
+
+HANDLE_X_PATH_ARG(with_gdk_pixbuf, --with-pixbuf, GDK_PIXBUF)
+
+if test "$with_gdk_pixbuf" != yes -a "$with_gdk_pixbuf" != no ; then
+ echo "error: must be yes or no: --with-pixbuf=$with_gdk_pixbuf"
+ exit 1
+fi
+
+if test "$with_gdk_pixbuf" = yes; then
+ have_gdk_pixbuf=no
+ have_gdk_pixbuf2=no
+
+ if test -n "$pkg_config" ; then
+ #
+ # the new way...
+ # run pkg-config based tests.
+ #
+ pkgs=''
+ ok="yes"
+
+ # If we have Gtk 2.x, then *only* gdk-pixbuf 2.x will work.
+ # If we have Gtk 1.x, then *only* gdk-pixbuf 1.x will work.
+ # If we don't have Gtk at all, then either will work.
+
+ if test "$have_gtk" = no -o "$have_gtk2" = yes; then
+ #
+ # we don't have Gtk; or we have Gtk 2.x. Check for pixbuf 2.x.
+ #
+ pkg_check_version gdk-pixbuf-2.0 2.0.0
+ pkg_check_version gdk-pixbuf-xlib-2.0 2.0.0
+ have_gdk_pixbuf="$ok"
+ have_gdk_pixbuf2="$ok"
+ fi
+
+ if test "$have_gtk" = no -o "$have_gtk2" = no; then
+ #
+ # we don't have Gtk; or we have Gtk 1.x.
+ # If we don't have pixbuf 2.x, then check for pixbuf 1.x.
+ #
+ if test "$have_gdk_pixbuf2" = no; then
+ pkgs=''
+ ok="yes"
+ pkg_check_version gdk-pixbuf 0.0
+ pkg_check_version gdk-pixbuf-xlib 0.0
+ have_gdk_pixbuf="$ok"
+ fi
+ fi
+
+ if test "$have_gdk_pixbuf" = yes; then
+ AC_CACHE_CHECK([for gdk-pixbuf includes], ac_cv_gdk_pixbuf_config_cflags,
+ [ac_cv_gdk_pixbuf_config_cflags=`$pkg_config --cflags $pkgs`])
+ AC_CACHE_CHECK([for gdk-pixbuf libs], ac_cv_gdk_pixbuf_config_libs,
+ [ac_cv_gdk_pixbuf_config_libs=`$pkg_config --libs $pkgs`])
+ fi
+ ac_gdk_pixbuf_config_cflags=$ac_cv_gdk_pixbuf_config_cflags
+ ac_gdk_pixbuf_config_libs=$ac_cv_gdk_pixbuf_config_libs
+ fi
+
+
+ if test "$have_gdk_pixbuf" = no; then
+ #
+ # the old way...
+ # run gdk-pixbuf-config based tests.
+ # note that we can't assume that the existence of "pkg-config" means
+ # that we don't have to look for gdk-pixbuf-config -- in Gnome 1.4,
+ # pkg-config exists, but doesn't know about pixbuf.
+ #
+
+ # if the user specified --with-gtk=/foo/ or --with-gnome=/foo/ then
+ # look in /foo/bin/ for for gdk-pixbuf-config.
+ #
+ gdk_pixbuf_path="$PATH"
+
+ if test ! -z "$gtk_dir"; then
+ # canonicalize slashes.
+ foo=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
+ gdk_pixbuf_path="$foo:$gdk_pixbuf_path"
+ fi
+
+ if test ! -z "$gnome_dir"; then
+ # canonicalize slashes.
+ foo=`echo "${gnome_dir}/bin" | sed 's@//*@/@g'`
+ gdk_pixbuf_path="$foo:$gdk_pixbuf_path"
+ fi
+
+ AC_PATH_PROGS(gdk_pixbuf_config, gdk-pixbuf-config,, $gdk_pixbuf_path)
+
+ # If we found the gdk-pixbuf-config program, run it to get flags.
+ #
+ if test -n "$gdk_pixbuf_config" ; then
+ AC_CACHE_CHECK([for gdk-pixbuf includes], ac_cv_gdk_pixbuf_config_cflags,
+ [ac_cv_gdk_pixbuf_config_cflags=`$gdk_pixbuf_config --cflags`])
+ AC_CACHE_CHECK([for gdk-pixbuf libs], ac_cv_gdk_pixbuf_config_libs,
+ [ac_cv_gdk_pixbuf_config_libs=`$gdk_pixbuf_config --libs`])
+
+ # note that "gdk-pixbuf-config --libs" produces a link line including
+ # -lgdk_pixbuf, but there's no way to get it to produce one that also
+ # includes -lgdk_pixbuf_xlib. Since we don't know *exactly* what the
+ # name of the library will be, construct it with sed...
+ # M4 sucks!!
+ changequote(X,Y)
+ ac_cv_gdk_pixbuf_config_libs=`echo $ac_cv_gdk_pixbuf_config_libs | \
+ sed 's@ \(-lgdk_pixbuf\([-_a-zA-Z0-9.]*\)\) @ \1 -lgdk_pixbuf_xlib\2 @'`
+ changequote([,])
+
+ ac_gdk_pixbuf_config_cflags=$ac_cv_gdk_pixbuf_config_cflags
+ ac_gdk_pixbuf_config_libs=$ac_cv_gdk_pixbuf_config_libs
+ fi
+ fi
+
+ ac_save_gdk_pixbuf_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $ac_gdk_pixbuf_config_cflags"
+
+ if test "$have_gdk_pixbuf" = no; then
+ #
+ # we appear to have pixbuf; check for headers/libs to be sure.
+ #
+
+ have_gdk_pixbuf=no
+
+ # check for header A...
+ AC_CHECK_X_HEADER(gdk-pixbuf/gdk-pixbuf.h, [have_gdk_pixbuf=yes])
+
+ # if that worked, check for header B...
+ if test "$have_gdk_pixbuf" = yes; then
+ have_gdk_pixbuf=no
+ gdk_pixbuf_halfassed=yes
+ AC_CHECK_X_HEADER(gdk-pixbuf/gdk-pixbuf-xlib.h,
+ [have_gdk_pixbuf=yes
+ gdk_pixbuf_halfassed=no])
+
+ # yay, it has a new name in Gtk 2.x...
+ if test "$have_gdk_pixbuf" = no; then
+ have_gdk_pixbuf=no
+ gdk_pixbuf_halfassed=yes
+ AC_CHECK_X_HEADER(gdk-pixbuf-xlib/gdk-pixbuf-xlib.h,
+ [have_gdk_pixbuf=yes
+ gdk_pixbuf_halfassed=no])
+ fi
+ fi
+ fi
+
+ CPPFLAGS="$ac_save_gdk_pixbuf_CPPFLAGS"
+
+ if test "$have_gdk_pixbuf" = yes; then
+ # we have the headers, now check for the libraries
+ have_gdk_pixbuf=no
+ gdk_pixbuf_halfassed=yes
+
+ # library A...
+ AC_CHECK_X_LIB(c, gdk_pixbuf_new_from_file, [have_gdk_pixbuf=yes],,
+ $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
+ # library B...
+ if test "$have_gdk_pixbuf" = yes; then
+ have_gdk_pixbuf=no
+ AC_CHECK_X_LIB(c, gdk_pixbuf_xlib_init,
+ [have_gdk_pixbuf=yes
+ gdk_pixbuf_halfassed=no],,
+ $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
+ fi
+ fi
+
+ if test "$have_gdk_pixbuf" = yes; then
+ INCLUDES="$INCLUDES $ac_gdk_pixbuf_config_cflags"
+ XPM_LIBS="$ac_gdk_pixbuf_config_libs"
+ AC_DEFINE(HAVE_GDK_PIXBUF)
+ else
+ have_gdk_pixbuf2=no
+ fi
+fi
+
+
+###############################################################################
+#
+# Check for -ljpeg
+#
+###############################################################################
+
+have_jpeg=no
+with_jpeg_req=unspecified
+jpeg_halfassed=no
+AC_ARG_WITH(jpeg,
+[ --with-jpeg Include support for the JPEG library.],
+ [with_jpeg="$withval"; with_jpeg_req="$withval"],
+ [with_jpeg=yes])
+
+HANDLE_X_PATH_ARG(with_jpeg, --with-jpeg, JPEG)
+
+if test "$with_jpeg" != yes -a "$with_jpeg" != no ; then
+ echo "error: must be yes or no: --with-jpeg=$with_jpeg"
+ exit 1
+fi
+
+if test "$with_jpeg" = yes; then
+
+ have_jpeg=no
+ AC_CHECK_X_HEADER(jpeglib.h, [have_jpeg=yes])
+
+ if test "$have_jpeg" = yes; then
+ # we have the header, now check for the library
+ have_jpeg=no
+ jpeg_halfassed=yes
+ AC_CHECK_X_LIB(jpeg, jpeg_start_compress,
+ [have_jpeg=yes
+ jpeg_halfassed=no
+ JPEG_LIBS="-ljpeg"
+ AC_DEFINE(HAVE_JPEGLIB)])
+ fi
+fi
+
###############################################################################
#
have_xshm=no
with_xshm_req=unspecified
AC_ARG_WITH(xshm-ext,
-[ --with-xshm-ext Include support for the XSHM extension.],
+[ --with-xshm-ext Include support for the Shared Memory extension.],
[with_xshm="$withval"; with_xshm_req="$withval"],[with_xshm=yes])
HANDLE_X_PATH_ARG(with_xshm, --with-xshm-ext, XSHM)
if test "$with_xshm" = yes; then
# first check for Xshm.h.
- AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes])
+ AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes],,
+ [#include <X11/Xlib.h>])
# if that succeeded, then check for sys/ipc.h.
if test "$have_xshm" = yes; then
if test "$with_xdbe" = yes; then
- AC_CHECK_X_HEADER(X11/extensions/Xdbe.h, [have_xdbe=yes])
+ AC_CHECK_X_HEADER(X11/extensions/Xdbe.h, [have_xdbe=yes],,
+ [#include <X11/Xlib.h>])
if test "$have_xdbe" = yes; then
AC_DEFINE(HAVE_DOUBLE_BUFFER_EXTENSION)
fi
if test "$with_readdisplay" = yes; then
AC_CHECK_X_HEADER(X11/extensions/readdisplay.h,
- AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION))
+ AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION),,
+ [#include <X11/Xlib.h>])
elif test "$with_readdisplay" != no; then
echo "error: must be yes or no: --with-readdisplay=$with_readdisplay"
exit 1
fi
-###############################################################################
-#
-# Check for the SGI Iris Video Library.
-#
-###############################################################################
-
-have_sgivideo=no
-with_sgivideo_req=unspecified
-AC_ARG_WITH(sgivideo,
-[ --with-sgivideo Include support for SGI's Iris Video Library.],
- [with_sgivideo="$withval"; with_sgivideo_req="$withval"],
- [with_sgivideo=yes])
-
-HANDLE_X_PATH_ARG(with_sgivideo, --with-sgivideo, Iris Video)
-
-if test "$with_sgivideo" = yes; then
- AC_CHECK_X_HEADER(dmedia/vl.h, have_sgivideo=yes)
- if test "$have_sgivideo" = yes; then
- have_sgivideo=no
- AC_CHECK_LIB(vl, vlOpenVideo, [have_sgivideo=yes])
- if test "$have_sgivideo" = yes; then
- SGI_VIDEO_OBJS="$(UTILS_BIN)/sgivideo.o"
- SGI_VIDEO_LIBS="-lvl"
- AC_DEFINE(HAVE_SGI_VIDEO)
- fi
- fi
-elif test "$with_sgivideo" != no; then
- echo "error: must be yes or no: --with-sgivideo=$with_sgivideo"
- exit 1
-fi
-
-
###############################################################################
#
# Check for a program to generate random text.
#
# Zippy is funnier than the idiocy generally spat out by `fortune',
-# so try to find that, by invoking Emacs and asking it where its
-# libexec directory is ("yow" lives in there.)
+# so first see if "fortune zippy" works. Else, use plain "fortune".
#
-# If that doesn't work, see if fortune, zippy, or yow are on $PATH,
-# and if so, use them.
-#
-# If that doesn't work, look in /usr/games, and if it's there, use
-# the full pathname.
+# We used to dig around in Emacs to look for the "yow" program, but
+# most people who have Emacs also have "fortune zippy", so nevermind.
#
###############################################################################
-with_zippy_req=""
-AC_ARG_WITH(zippy,[
- --with-zippy=PROGRAM Some demos are able to run an external program and
+with_fortune_req=""
+AC_ARG_WITH(fortune,[
+ --with-fortune=PROGRAM Some demos are able to run an external program and
display its text; this names the program to use by
default (though it can be overridden with X
- resources.) If you don't specify this, the default
- is to use \"yow\" from the Emacs distribution (if you
- have it) or else to use \"fortune\".
-],
- [with_zippy_req="$withval"; with_zippy="$withval"],[with_zippy=yes])
+ resources.) Default is \"/usr/games/fortune\".],
+ [with_fortune_req="$withval"; with_fortune="$withval"],[with_fortune=yes])
-if test "$with_zippy" = no || test "$with_zippy" = yes ; then
- with_zippy=""
- with_zippy_req=""
+if test "$with_fortune" = no || test "$with_fortune" = yes ; then
+ with_fortune=""
+ with_fortune_req=""
fi
-if test -n "$with_zippy_req" ; then
- ac_cv_zippy_program=""
- case "$with_zippy_req" in
+if test -n "$with_fortune_req" ; then
+ ac_cv_fortune_program=""
+ case "$with_fortune_req" in
/*)
- AC_MSG_CHECKING([for $with_zippy_req])
- if test -x "$with_zippy_req" ; then
+
+ set dummy $with_fortune_req ; fortune_tmp=$2
+ AC_MSG_CHECKING([for $fortune_tmp])
+ if test -x "$fortune_tmp" ; then
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
- with_zippy=""
+ with_fortune=""
fi
;;
*)
+ set dummy $with_fortune_req ; fortune_tmp=$2
# don't cache
- unset ac_cv_path_zip2
- AC_PATH_PROG(zip2, $with_zippy_req, [])
- if test "$zip2" = ""; then
- with_zippy=""
+ unset ac_cv_path_fortune_tmp
+ AC_PATH_PROG(fortune_tmp, $fortune_tmp, [])
+ if test -z "$fortune_tmp" ; then
+ with_fortune=""
fi
;;
esac
- ac_cv_zippy_program="$with_zippy"
+ ac_cv_fortune_program="$with_fortune"
-elif test -n "$ac_cv_zippy_program"; then
- AC_MSG_RESULT([checking for zippy... (cached) $ac_cv_zippy_program])
+elif test -n "$ac_cv_fortune_program"; then
+ AC_MSG_RESULT([checking for fortune... (cached) $ac_cv_fortune_program])
fi
-if test ! -n "$ac_cv_zippy_program"; then
+unset ac_cv_path_fortune_tmp
+unset fortune_tmp
- AC_CHECK_PROGS(emacs_exe, emacs)
- AC_CHECK_PROGS(xemacs_exe, xemacs)
+if test -z "$ac_cv_fortune_program" ; then
- ac_cv_zippy_program=""
- eargs='-batch -q -nw --eval'
+ # first look for fortune in /usr/games/ (and use absolute path)
+ AC_PATH_PROGS(fortune_tmp, fortune,, "/usr/games")
- if test -n "$emacs_exe" ; then
- AC_MSG_CHECKING([for emacs yow])
- #
- # get emacs to tell us where the libexec directory is.
- #
- dir=`$emacs_exe $eargs '(princ (concat exec-directory "\n"))' \
- 2>/dev/null | tail -1`
- dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
- #
- # try running libexec/yow and see if it exits without error.
- #
- if test x"$dir" != x -a -x "$dir/yow" ; then
- if $dir/yow >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- AC_MSG_RESULT(no)
- fi
- fi
+ # if it's not there, look on $PATH (and don't use absolute path)
+ if test -z "$fortune_tmp" ; then
+ AC_CHECK_PROGS(fortune_tmp, fortune)
fi
- if test -z "$ac_cv_zippy_program" ; then
- AC_MSG_CHECKING([for xemacs yow])
- if test -n "$xemacs_exe" ; then
- #
- # get xemacs to tell us where the libexec directory is.
- #
- dir=`$xemacs_exe $eargs '(princ (concat exec-directory "\n"))' \
- 2>/dev/null | tail -1`
- dir=`echo "$dir" | sed 's@///*@/@g;s@/$@@'`
- #
- # try running libexec/yow and see if it exits without error.
- #
- if test x"$dir" != x -a -x "$dir/yow" ; then
- if $dir/yow >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- #
- # in some xemacs installations, the pathname of the yow.lines file
- # isn't hardcoded into the yow executable, and must be passed on
- # the command line. See if it's in libexec/../etc/.
-
- # M4 sucks!!
- changequote(X,Y)
- dir_up=`echo "$dir" | sed 's@/[^/]*$@@'`
- changequote([,])
-
- yowlines="$dir_up/etc/yow.lines"
- if $dir/yow -f $yowlines >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow -f $yowlines"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- #
- # In newer XEmacs releases, yow.lines is in a different place,
- # and the easiest way to get it is by calling the new function
- # `locate-data-file'.
- #
- yowlines=`$xemacs_exe $eargs \
- '(princ (concat (locate-data-file "yow.lines") "\n"))' \
- 2>/dev/null | tail -1`
- if $dir/yow -f $yowlines >&- 2>&- ; then
- ac_cv_zippy_program="$dir/yow -f $yowlines"
- AC_MSG_RESULT($ac_cv_zippy_program)
- else
- AC_MSG_RESULT(no)
- fi
- fi
- fi
- fi
- fi
+ # if we didn't find anything, then just assume /usr/games/
+ if test -z "$fortune_tmp" ; then
+ fortune_tmp="/usr/games/fortune"
fi
- # if that didn't work, try for some other programs...
- if test -z "$ac_cv_zippy_program" ; then
- fortune=''
- AC_CHECK_PROGS(fortune, [fortune zippy yow])
- # if that didn't work, try for those programs in /usr/games...
- if test -z "$fortune" ; then
- AC_PATH_PROGS(fortune, [fortune zippy yow], fortune,
- /usr/games:/usr/local/games:$PATH)
- fi
+ ac_cv_fortune_program="$fortune_tmp"
+
+ # now check to see whether "fortune zippy" works.
+ #
+ fortune_tmp="$fortune_tmp zippy"
+ AC_MSG_CHECKING([for zippy quotes])
+ if ( $fortune_tmp >/dev/null 2>&1 ); then
+ ac_cv_fortune_program="$fortune_tmp"
+ AC_MSG_RESULT($fortune_tmp)
+ else
+ AC_MSG_RESULT(no)
fi
-fi
-if test -z "$ac_cv_zippy_program" ; then
- ac_cv_zippy_program=fortune
fi
-AC_DEFINE_UNQUOTED(ZIPPY_PROGRAM, "$ac_cv_zippy_program")
+unset ac_cv_path_fortune_tmp
+unset fortune_tmp
+
+AC_DEFINE_UNQUOTED(FORTUNE_PROGRAM, "$ac_cv_fortune_program")
+
+
+###############################################################################
+#
+# Check whether it's ok to install some hacks as setuid (e.g., "sonar")
+# This should be safe, but let's give people the option.
+#
+###############################################################################
+
+setuid_hacks_default=no
+setuid_hacks="$setuid_hacks_default"
+AC_ARG_WITH(setuid-hacks,
+[ --with-setuid-hacks Allow some demos to be installed \`setuid root'
+ (which is needed in order to ping other hosts.)
+],
+ [setuid_hacks="$withval"], [setuid_hacks="$setuid_hacks_default"])
+
+HANDLE_X_PATH_ARG(setuid_hacks, --with-setuid-hacks, setuid hacks)
+
+if test "$setuid_hacks" = yes; then
+ true
+elif test "$setuid_hacks" != no; then
+ echo "error: must be yes or no: --with-setuid-hacks=$setuid_hacks"
+ exit 1
+fi
###############################################################################
LOCK_OBJS='$(NOLOCK_OBJS_1)'
fi
+INSTALL_SETUID='$(INSTALL_PROGRAM) $(SUID_FLAGS)'
+
if test "$need_setuid" = yes; then
NEED_SETUID=yes
- INSTALL_SETUID='$(INSTALL) $(SUID_FLAGS)'
else
NEED_SETUID=no
- INSTALL_SETUID='$(INSTALL_PROGRAM)'
+fi
+
+if test "$setuid_hacks" = yes; then
+ SETUID_HACKS=yes
+else
+ SETUID_HACKS=no
fi
tab=' '
if test "$have_gl" = yes; then
GL_EXES='$(GL_EXES)'
+ GL_UTIL_EXES='$(GL_UTIL_EXES)'
GL_MEN='$(GL_MEN)'
GL_KLUDGE="${tab} "
else
if test "$have_gle" = yes; then
GLE_EXES='$(GLE_EXES)'
- GLE_MEN='$(GLE_MEN)'
GLE_KLUDGE="${tab} "
else
GLE_KLUDGE="-${tab} "
fi
+if test "$have_jpeg" = yes -a "$have_gdk_pixbuf" = yes; then
+ JPEG_EXES='$(JPEG_EXES)'
+fi
+
+
+# Another substitution in the XScreenSaver.ad.in file:
+#
+if test "$have_gnome_help" = yes; then
+ GNOMEHELP_Y=''
+ GNOMEHELP_N='! '
+else
+ GNOMEHELP_Y='! '
+ GNOMEHELP_N=''
+fi
+
+
+# Now that we know whether we have Gnome, we can decide where the XML
+# config files get installed.
+#
+if test -z "$HACK_CONF_DIR" ; then
+ if test -n "$GNOME_DATADIR" ; then
+ HACK_CONF_DIR='${GNOME_DATADIR}/control-center/screensavers'
+ else
+ HACK_CONF_DIR='${prefix}/lib/xscreensaver/config'
+ fi
+fi
+
+
+
+# After computing $HACK_CONF_DIR, make sure $GLADE_DATADIR has a value
+# so that we know where to install the Gtk pixmaps.
+#
+# It should usually be "/usr/share/pixmaps/", but we can't just use
+# "$(prefix)/share/pixmaps" because that would usually result in
+# "/usr/X11R6/share/pixmaps/", which is wrong. It needs to be the
+# Gnome/Gtk prefix, not the overall prefix.
+#
+if test -n "$GNOME_DATADIR" ; then
+ GLADE_DATADIR='$(GNOME_DATADIR)/xscreensaver'
+elif test "$have_gtk" = yes; then
+ if test -n "$pkg_config"; then
+ if test "$have_gtk2" = yes; then
+ GLADE_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
+ else
+ GLADE_DATADIR=`$pkg_config --variable=prefix gtk+`
+ fi
+ else
+ GLADE_DATADIR=`$gtk_config --prefix`
+ fi
+ GLADE_DATADIR="$GLADE_DATADIR/share/xscreensaver"
+else
+ GLADE_DATADIR=''
+fi
+
+
+# Set PO_DATADIR to something sensible.
+#
+AC_MSG_CHECKING([for locale directory])
+if test -n "$GNOME_DATADIR" ; then
+ PO_DATADIR="$GNOME_DATADIR"
+elif test "$have_gtk" = yes; then
+ if test -n "$pkg_config"; then
+ if test "$have_gtk2" = yes; then
+ PO_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
+ else
+ PO_DATADIR=`$pkg_config --variable=prefix gtk+`
+ fi
+ else
+ PO_DATADIR=`$gtk_config --prefix`
+ fi
+ PO_DATADIR="$PO_DATADIR/share"
+fi
+
+if test -z "$PO_DATADIR" ; then
+ #
+ # #### Total fucking kludge --
+ # Map /build/prefix/usr/X11R6/share/ to /build/prefix/usr/share/
+ # but of course we need to expand all the nested variables to do that...
+ #
+ dd=$datadir
+ eval dd=${dd}
+ eval dd=${dd}
+ eval dd=${dd}
+ eval dd=${dd}
+ eval dd=${dd}
+ PO_DATADIR=`echo $dd | sed 's@/X11R6/@/@'`
+fi
+
+AC_MSG_RESULT($PO_DATADIR/locale)
+
+
+# canonicalize slashes.
+HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`
+
+# gcc 3.0 likes to issue this warning for every file:
+#
+# cc1: warning: changing search order for system directory "/usr/local/include"
+# cc1: warning: as it has already been specified as a non-system directory
+#
+# Yay. We can only avoid that by deleting "-I${prefix}/include" from the list.
+# Which *should* be totally redundant, and thus an ok thing to delete?
+#
+INCLUDES=`echo "$INCLUDES" | sed 's@ -I${prefix}/include@@g;'`
+
###############################################################################
#
AC_SUBST(SAVER_LIBS)
AC_SUBST(MOTIF_LIBS)
AC_SUBST(GTK_LIBS)
+AC_SUBST(XML_LIBS)
+AC_SUBST(JPEG_LIBS)
AC_SUBST(HACK_LIBS)
AC_SUBST(XPM_LIBS)
AC_SUBST(GL_LIBS)
AC_SUBST(GLE_LIBS)
+AC_SUBST(XDPMS_LIBS)
AC_SUBST(PASSWD_LIBS)
AC_SUBST(INSTALL_SETUID)
+AC_SUBST(SETUID_HACKS)
AC_SUBST(INSTALL_DIRS)
AC_SUBST(NEED_SETUID)
AC_SUBST(INSTALL_PAM)
-AC_SUBST(SGI_VIDEO_OBJS)
-AC_SUBST(SGI_VIDEO_LIBS)
AC_SUBST(PASSWD_SRCS)
AC_SUBST(PASSWD_OBJS)
AC_SUBST(XMU_SRCS)
AC_SUBST(XMU_OBJS)
+AC_SUBST(XMU_LIBS)
AC_SUBST(SAVER_GL_SRCS)
AC_SUBST(SAVER_GL_OBJS)
AC_SUBST(SAVER_GL_LIBS)
AC_SUBST(LOCK_SRCS)
AC_SUBST(LOCK_OBJS)
+AC_SUBST(JPEG_EXES)
AC_SUBST(GL_EXES)
+AC_SUBST(GL_UTIL_EXES)
AC_SUBST(GL_MEN)
AC_SUBST(GL_KLUDGE)
AC_SUBST(GLE_EXES)
-AC_SUBST(GLE_MEN)
AC_SUBST(GLE_KLUDGE)
+AC_SUBST(GNOMEHELP_Y)
+AC_SUBST(GNOMEHELP_N)
AC_SUBST(HACKDIR)
AC_SUBST(GNOME_DATADIR)
+AC_SUBST(GLADE_DATADIR)
+AC_SUBST(PO_DATADIR)
+AC_SUBST(GNOME_PANELDIR)
+AC_SUBST(HACK_CONF_DIR)
+AC_SUBST(GTK_EXTRA_OBJS)
APPDEFAULTS=$ac_x_app_defaults
AC_SUBST(APPDEFAULTS)
driver/Makefile
hacks/Makefile
hacks/glx/Makefile
- driver/XScreenSaver.ad)
+ po/Makefile.in
+ driver/XScreenSaver.ad
+ driver/xscreensaver.kss)
###############################################################################
#
warnpre
if test "$warning" = long ; then echo '' ; fi
warning=yes
- echo "$warn_prefix $@"
+ rest="$@"
+ echo "$warn_prefix $rest"
}
warnL() {
warnpre
warning=yes
if test "$was" != no ; then echo '' ; fi
- echo "$warn_prefix $@"
+ rest="$@"
+ echo "$warn_prefix $rest"
}
warn2() {
- echo " $@"
+ rest="$@"
+ echo " $rest"
warning=long
}
warn 'The DPMS extension was requested, but was not found.'
fi
+if test "$with_xinerama_req" = yes -a "$have_xinerama" = no ; then
+ warn 'The Xinerama extension was requested, but was not found.'
+fi
+
if test "$with_xf86vmode_req" = yes -a "$have_xf86vmode" = no ; then
warn 'The XF86VMODE extension was requested, but was not found.'
fi
warn2 "Gtk $pref_gtk or newer is required. Motif will be used instead."
elif test "$with_gtk_req" = yes -a "$have_gtk" = no ; then
- warnL "Use of Gtk was requested, but it wasn't found;"
- warn2 "Motif will be used instead."
+ warnL "Use of Gtk was requested, but it wasn't found."
+ if test "$have_motif" = yes; then
+ warn2 "Motif will be used instead."
+ fi
+fi
+if test "$gtk2_halfassed" != no ; then
+ warnL "GTK version $gtk2_halfassed was found, but at least one supporting"
+ warn2 "library ($gtk2_halfassed_lib) was not, so GTK 2.x can't be used."
+ v="$ac_gtk_version_string"
+ warn2 "GTK $v is also installed, so it will be used instead."
+ warn2 "Please read the above output and the \`config.log' file"
+ warn2 "for more details."
fi
warn2 'headers and/or libraries were not found.'
fi
+if test "$have_gtk" = yes ; then
+ if test "$have_xml" = no ; then
+ if test "$with_xml_req" = yes ; then
+ warn 'Use of the XML library was requested, but the necessary'
+ warn2 'headers and/or libraries were not found.'
+ else
+ warn 'GTK is being used, but the XML library was not found.'
+ fi
+
+ if test "$xml_halfassed" = yes ; then
+
+ if test "$have_zlib" = yes ; then
+ which="XML libraries"
+ else
+ which="\`zlib' library"
+ fi
+
+ echo ''
+ warn2 'More specifically, we found the headers, but not the'
+ warn2 "$which; so either XML is half-installed on this"
+ warn2 "system, or something else went wrong. The \`config.log'"
+ warn2 'file might contain some clues.'
+ fi
+
+ echo ''
+ warn2 "Without XML, the per-display-mode \`Settings' dialogs"
+ warn2 'will not be available. Specify the location of the XML'
+ warn2 'library through the --with-xml option to configure.'
+ fi
+fi
+
+if test "$have_gtk" = yes -a "$have_gdk_pixbuf" = no ; then
+ warn "GTK is being used, but the GDK-Pixbuf library and/or"
+ warn2 "headers were not found. That can't be good. Please"
+ warn2 "install the GDK-Pixbuf development kit and re-configure."
+fi
if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
- preferred_lesstif=0.86
+ preferred_lesstif=0.92
if test "$lesstif_version" = unknown; then
warnL "Unable to determine the LessTif version number!"
fi
+if test "$have_motif" = yes -a "$have_gtk" = no ; then
+ warn 'Motif is being used, and GTK is not.'
+ echo ''
+ warn2 'Though the Motif front-end to xscreensaver is still'
+ warn2 'maintained, it is no longer being updated with new'
+ warn2 'features: all new development on the xscreensaver-demo'
+ warn2 'program is happening in the GTK version, and not in the'
+ warn2 'Motif version. It is recommended that you build against'
+ warn2 'GTK instead of Motif. See <http://www.gtk.org/>.'
+fi
-if test "$have_xpm" = no ; then
- if test "$with_xpm_req" = yes ; then
- warnL 'Use of XPM was requested, but it was not found.'
+
+if test "$with_xpm_req" = yes -a "$have_xpm" = no; then
+ warnL 'Use of XPM was requested, but it was not found.'
+fi
+
+if test "$with_gdk_pixbuf_req" = yes -a "$have_gdk_pixbuf" = no; then
+ warnL 'Use of GDK-Pixbuf was requested, but it was not found.'
+fi
+
+if test "$have_xpm" = no -a "$have_gdk_pixbuf" = no || \
+ test "$gdk_pixbuf_halfassed" = yes; then
+
+ if test "$with_xpm_req" = yes -o "$have_xpm" = yes ; then
+ true
elif test "$with_xpm_req" = no ; then
- noteL 'The XPM library is not being used.'
+ warnL 'The XPM library is not being used.'
+ else
+ warnL 'The XPM library was not found.'
+ fi
+
+ if test "$with_gdk_pixbuf_req" = yes ; then
+ true
+ elif test "$with_gdk_pixbuf_req" = no ; then
+ warnL 'The GDK-Pixbuf library is not being used.'
else
- noteL 'The XPM library was not found.'
+ warnL 'The GDK-Pixbuf library was not found.'
+ fi
+
+ if test "$gdk_pixbuf_halfassed" = yes ; then
+ echo ''
+ warn2 'More specifically, we found the headers, but not the'
+ warn2 'libraries; so either GDK-Pixbuf is half-installed on this'
+ warn2 "system, or something else went wrong. The \`config.log'"
+ warn2 'file might contain some clues.'
fi
echo ''
warn2 'Some of the demos will not be as colorful as they'
- warn2 'could be. You might want to consider installing XPM'
- warn2 'and re-running configure. (Remember to delete the'
- warn2 'config.cache file first.) You can find XPM at most'
- warn2 'X11 archive sites, such as <http://sunsite.unc.edu/>.'
+ warn2 'could be. You should consider installing Pixbuf or'
+ warn2 'XPM and re-running configure. The Pixbuf library is'
+ warn2 'a part of GNOME. The XPM library comes with most'
+ warn2 'X11 installations; you can also find it at the X11'
+ warn2 'archive sites, such as <http://sunsite.unc.edu/>.'
+ echo ''
+ warn2 'GDK-Pixbuf is recommended over XPM, as it provides'
+ warn2 'support for more image formats.'
+fi
+
+
+if test "$have_jpeg" = no ; then
+ if test "$with_jpeg_req" = yes ; then
+ warnL 'Use of libjpeg was requested, but it was not found.'
+ elif test "$with_jpeg_req" = no ; then
+ noteL 'The JPEG library is not being used.'
+ else
+ noteL 'The JPEG library was not found.'
+ fi
+
+ if test "$jpeg_halfassed" = yes ; then
+ echo ''
+ warn2 'More specifically, we found the headers, but not the'
+ warn2 'library; so either JPEG is half-installed on this'
+ warn2 "system, or something else went wrong. The \`config.log'"
+ warn2 'file might contain some clues.'
+ echo ''
+ fi
+
+ if test "$have_gdk_pixbuf" = no ; then
+ warn2 "This means that it won't be possible for the image-manipulating"
+ warn2 "display modes to load files from disk; and it also means that"
+ warn2 "the \`webcollage' program will be much slower."
+ else
+ warn2 "This means the \`webcollage' program will be much slower."
+ fi
fi
if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then
- preferred_mesagl=3.0
+ preferred_mesagl=3.4
+ mgv="$ac_mesagl_version_string"
+ pgl="$preferred_mesagl"
if test "$ac_mesagl_version" = unknown; then
warnL "Unable to determine the MesaGL version number!"
warn2 "Make sure you are using version $preferred_mesagl or newer."
elif test \! "$ac_mesagl_version" -gt 2006; then
- warnL "MesaGL version $ac_mesagl_version_string is being used."
- warn2 "MesaGL versions 2.6 and earlier have a security bug."
- warn2 "It is strongly recommended that you upgrade to at"
- warn2 "least version $preferred_mesagl."
+ warnL "MesaGL version number is $mgv --"
+ warn2 "MesaGL 2.6 and earlier have a security bug. It is strongly"
+ warn2 "recommended that you upgrade to at least version $preferred_mesagl."
+
+ elif test \! "$ac_mesagl_version" -gt 3003; then
+ warnL "MesaGL version number is $mgv --"
+ warn2 "MesaGL 3.3 and earlier have some bugs; it is recommended"
+ warn2 "that you upgrade to $pgl or newer."
fi
fi
echo ''
warn2 'Those demos which use 3D will not be built or installed.'
warn2 'You might want to consider installing OpenGL and'
- warn2 're-running configure. (Remember to delete the'
- warn2 "config.cache file first.) If your vendor doesn't ship"
+ warn2 "re-running configure. If your vendor doesn't ship"
warn2 'their own implementation of OpenGL, you can get a free'
warn2 'version at <http://www.mesa3d.org/>. For general OpenGL'
warn2 'info, see <http://www.opengl.org/>.'
if test "$have_gl" = yes -a "$have_gle" = no ; then
+
+ # nobody cares about this; don't print the warning unless it was
+ # requested and not found, or halfway-found.
+ if test "$with_gle_req" = yes -o "$gle_halfassed" = yes ; then
+
if test "$with_gle_req" = yes ; then
noteL 'Use of the GLE (GL Extrusion) library was requested, but'
warn2 'it was not found (though the OpenGL library was found, and'
echo ''
warn2 'Some of the OpenGL (3D) demos (those that depend on GLE)'
warn2 'will not be built or installed. You might want to consider'
- warn2 'installing GLE and re-running configure. (Remember to delete'
- warn2 'the config.cache file first.) You can find the GLE library'
- warn2 'at <http://www.linas.org/gle/>. For general OpenGL info,'
- warn2 'see <http://www.opengl.org/>.'
+ warn2 'installing GLE and re-running configure. You can find the'
+ warn2 'GLE library at <http://www.linas.org/gle/>. For general'
+ warn2 'OpenGL info, see <http://www.opengl.org/>.'
+ fi
fi
warn 'Use of XReadDisplay was requested, but it was not found.'
fi
-if test "$with_sgivideo_req" = yes -a "$have_sgivideo" = no ; then
- warn 'Use of the Iris Video Library was requested, but it was not found.'
-fi
-
-if test -n "$with_zippy_req"; then
- if test "$with_zippy_req" != "$ac_cv_zippy_program" ; then
- warnL "$with_zippy_req was requested as the Zippy program,"
+if test -n "$with_fortune_req"; then
+ if test "$with_fortune_req" != "$ac_cv_fortune_program" ; then
+ warnL "$with_fortune_req was requested as the Fortune program,"
warn2 "but was not found. The default will be used instead."
fi
fi
eval HACKDIR=${HACKDIR}
eval HACKDIR=${HACKDIR}
eval HACKDIR=${HACKDIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
+eval HACK_CONF_DIR=${HACK_CONF_DIR}
# canonicalize slashes.
-bindir=`echo "${bindir}" | sed 's@/$@@;s@//*@/@g'`
-HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+bindir=`echo "${bindir}" | sed 's@/$@@;s@//*@/@g'`
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`
-# Sanity check the subdir
+# Sanity check the hackdir
for bad_choice in xscreensaver xscreensaver-demo xscreensaver-command ; do
if test "${HACKDIR}" = "${bindir}/${bad_choice}" ; then
echo ""
- AC_MSG_ERROR([\"--enable-subdir=${bindir}/${bad_choice}\" won't work.
+ AC_MSG_ERROR([\"--with-hackdir=${bindir}/${bad_choice}\" won't work.
There will be an executable installed with that name, so
that can't be the name of a directory as well. Please
re-configure with a different directory name.])
# M4 sucks!!
changequote(X,Y)
-rpmv=`(rpm -qv xscreensaver) 2>&- | \
- sed 's/^xscreensaver-\([0-9][0-9]*[.][0-9][0-9]*\)-.*$/\1/'`
+rpmv=`(rpm -qv xscreensaver) 2>/dev/null | \
+ sed -n 's/^xscreensaver-\([0-9][0-9]*[.][0-9][0-9]*\)-.*$/\1/p'`
changequote([,])
if test \! -z "$rpmv" ; then
echo ""
if test "$rpmbdir" = "$rpmhdir" ; then
- warn2 "The RPM version was installed in $rpmbdir."
+ warn2 "The RPM version was installed in $rpmbdir/."
else
- warn2 "The RPM version was installed in $rpmbdir,"
- warn2 "with demos in $rpmhdir."
+ warn2 "The RPM version was installed in $rpmbdir/,"
+ warn2 "with demos in $rpmhdir/."
fi
do_dir_warning=yes
fi
-# Warn about egregious GNOME bogosity.
-#
-#if (rpm -qv control-center) >&- 2>&- ; then
-# warning=no
-# warnL "The Gnome Control Center seems to be installed."
-# echo ""
-# warn2 "Note that simply installing this version of xscreensaver"
-# warn2 "will not cause GNOME to know about the newly-added display"
-# warn2 "modes -- GNOME is just lame that way. Instead of using the"
-# warn2 "Control Center, try using the \`xscreensaver-demo' command."
-#fi
-
-
if test "${bindir}" = "${HACKDIR}" ; then
do_dir_warning=yes
fi
echo ""
echo ' When you run "make install", the "xscreensaver",'
echo ' "xscreensaver-demo", and "xscreensaver-command" executables'
- echo " will be installed in ${bindir}."
+ echo " will be installed in ${bindir}/."
echo ""
- echo " The various graphics demos (100+ different executables) will"
- echo " also be installed in ${HACKDIR}."
+ echo " The various graphics demos (150+ different executables) will"
+ echo " be installed in ${HACKDIR}/."
echo ""
- echo " If you would prefer the demos to be installed elsewhere"
- echo " (for example, in a dedicated directory) you should re-run"
- echo " configure with the --enable-subdir=DIR option. For more"
- echo " information, run $0 --help."
+ echo " If you would prefer the demos to be installed elsewhere,"
+ echo " you should re-run configure with the --with-hackdir=DIR"
+ echo " option. For more information, run \`./configure --help'."
warning=yes
fi
if test "$warning" != no; then
echo '' ; echo "$warnsep" ; echo ''
fi
+
+if test "$do_dir_warning" = no; then
+ if test "$warning" = no; then
+ echo ''
+ fi
+ echo "User programs will be installed in ${bindir}/"
+ echo "Screen savers will be installed in ${HACKDIR}/"
+ echo "Configuration will be installed in ${HACK_CONF_DIR}/"
+ echo ''
+fi