NOGNOME
GNOME22
GNOME24
+GLFONT_OBJS
+GLFPS_OBJS
+JWZGLES_OBJS
GLE_KLUDGE
GLE_EXES
GL_KLUDGE
DEFAULT_IMAGES_P
NEW_LOGIN_COMMAND_P
NEW_LOGIN_COMMAND
+COMMENT_PAM_CHECK_ACCOUNT
HAVE_PAM_FAIL_DELAY
INSTALL_PAM
NEED_SETUID
with_hackdir
enable_subdir
with_configdir
-with_sgi_ext
-with_xidle_ext
-with_sgivc_ext
with_dpms_ext
with_xinerama_ext
with_xinput_ext
enable_root_passwd
with_pam
with_pam_service_name
+enable_pam_check_account_type
with_kerberos
with_shadow
with_passwd_helper
with_motif
with_gl
with_gle
+with_gles
with_pixbuf
with_xpm
with_jpeg
--enable-root-passwd Allow root passwd to unlock screen.
--disable-root-passwd Do not allow that.
+ --enable-pam-check-account-type
+ Whether PAM should check the result of account
+ modules when authenticating. Only do this if you
+ have account configured properly on your system.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--with-x-app-defaults=DIR
Where to install xscreensaver configuration file.
-Except where noted, all of the --with options below can also take a
-directory argument: for example, `--with-motif=/opt/Motif'. That would
-cause /opt/Motif/include/ to be added to the -I list, and /opt/Motif/lib/
-to be added to the -L list, assuming those directories exist.
-
-By default, support for each of these options will be built in, if the
-relevant library routines exist. At run time, they will then be used
-only if the X server being used supports them. Each --with option has
-a corresponding --without option, to override building support for them
-at all.
-
-Screen blanking and idle-detection options:
-
- --with-sgi-ext Include support for the SGI SCREEN_SAVER extension.
- --with-xidle-ext Include support for the XIDLE extension.
- --with-sgivc-ext Include support for the SGI-VIDEO-CONTROL extension.
--with-dpms-ext Include support for the DPMS extension.
--with-xinerama-ext Include support for the XINERAMA extension.
- --with-xinput-ext Include support for the XInput extension.
+ --with-xinput-ext Include support for the XInput extension.
--with-xf86vmode-ext Include support for XFree86 virtual screens.
--with-xf86gamma-ext Include support for XFree86 gamma fading.
--with-randr-ext Include support for the X Resize+Rotate extension.
--with-proc-interrupts Include support for consulting the /proc/interrupts
file to notice keyboard activity.
--with-pam Include support for PAM (Pluggable Auth Modules.)
- --with-pam-service-name=NAME
- NAME is the name of the PAM service that
+ --with-pam-service-name NAME arg is the name of the PAM service that
xscreensaver will authenticate as.
--with-kerberos Include support for Kerberos authentication.
--with-shadow Include support for shadow password authentication.
--with-gtk Use the Gtk toolkit for the user interface.
--with-motif Use the Motif toolkit for the user interface
- (not recommended.)
+ (no longer supported.)
Graphics options:
--with-gl Build those demos which depend on OpenGL.
--with-gle Build those demos which depend on GLE
(the OpenGL "extrusion" library.)
+ --with-gles Target OpenGL ES 1.x API instead of OpenGL 1.3.
--with-pixbuf Include support for the GDK-Pixbuf library in some
demos, which will make it possible for them to read
GIF, JPEG, and PNG files as well.
--with-xshm-ext Include support for the Shared Memory extension.
--with-xdbe-ext Include support for the DOUBLE-BUFFER extension.
--with-readdisplay Include support for the XReadDisplay extension.
- --with-image-directory=DIR By default, some demos may display random images
- from this directory.
+ --with-image-directory Arg is the default directory from which some demos
+ will choose random images to display.
--with-text-file=FILE By default, some demos may display this file.
- --with-browser=BROWSER Specify the browser to show help URL.
+ --with-browser=BROWSER Specify the web browser used to show the help URL.
--with-setuid-hacks Allow some demos to be installed `setuid root'
(which is needed in order to ping other hosts.)
+# This only ever existed in X11R4 and X11R5.
+#AH_TEMPLATE([HAVE_XIDLE_EXTENSION],
+# [Define this if you have the XIDLE extension installed. If you
+# have the XIDLE extension, this is recommended. (You have this
+# extension if the file /usr/include/X11/extensions/xidle.h
+# exists.) Turning on this flag lets XScreenSaver work better with
+# servers which support this extension; but it will still work
+# with servers which do not suport it, so it's a good idea to
+# compile in support for it if you can.])
+
+# Using this extension will crash your X server and make fading not work.
+#AH_TEMPLATE([HAVE_MIT_SAVER_EXTENSION],
+# [Define this if you have the MIT-SCREEN-SAVER extension
+# installed. See the caveats about this extension, above.
+# (It's available if /usr/include/X11/extensions/scrnsaver.h
+# exists.)])
+
+# This only ever existed on SGI hardware.
+#AH_TEMPLATE([HAVE_SGI_SAVER_EXTENSION],
+# [Define this if you have the SGI SCREEN_SAVER extension. This is
+# standard on Irix systems, and not available elsewhere.])
+
+# This only ever existed on SGI hardware.
+#AH_TEMPLATE([HAVE_SGI_VC_EXTENSION],
+# [Define this if you have the SGI-VIDEO-CONTROL extension. This
+# is standard on Irix systems, and not available elsewhere.])
+
+
###############################################################################
#
# Some utility functions to make checking for X things easier.
_ACEOF
fi
+{ $as_echo "$as_me:$LINENO: checking for getifaddrs" >&5
+$as_echo_n "checking for getifaddrs... " >&6; }
+if test "${ac_cv_have_getifaddrs+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+ #include <unistd.h>
+ #include <arpa/inet.h>
+ #include <ifaddrs.h>
+int
+main ()
+{
+struct ifaddrs *ifa;
+ getifaddrs (&ifa);
+ ifa->ifa_next = 0;
+ ifa->ifa_addr->sa_family = 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -rf conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -rf conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_getifaddrs=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_getifaddrs=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_getifaddrs" >&5
+$as_echo "$ac_cv_have_getifaddrs" >&6; }
+ if test "$ac_cv_have_getifaddrs" = yes ; then
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETIFADDRS 1
+_ACEOF
+
+ fi
for ac_header in crypt.h sys/select.h
$as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_sunos_xmu_bug=no
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_sunos_xmu_bug=yes
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$ac_save_LDFLAGS"
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sunos_xmu_bug" >&5
-$as_echo "$ac_cv_sunos_xmu_bug" >&6; }
- if test "$ac_cv_sunos_xmu_bug" = yes ; then
- { $as_echo "$as_me:$LINENO: checking whether the compiler understands -static" >&5
-$as_echo_n "checking whether the compiler understands -static... " >&6; }
-if test "${ac_cv_ld_static+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -static"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -rf conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -rf conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_ld_static=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_ld_static=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$ac_save_LDFLAGS"
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_ld_static" >&5
-$as_echo "$ac_cv_ld_static" >&6; }
- if test "$ac_cv_ld_static" = yes ; then
- LDFLAGS="$LDFLAGS -static"
- else
- LDFLAGS="$LDFLAGS -Bstatic"
- fi
- fi
- ;;
- esac
-fi
-
-
-###############################################################################
-#
-# Handle the --with-hackdir option
-#
-###############################################################################
-
-have_hackdir=yes
-with_hackdir_req=unspecified
-
-# Check whether --with-hackdir was given.
-if test "${with_hackdir+set}" = set; then
- withval=$with_hackdir; with_hackdir="$withval"; with_hackdir_req="$withval"
-else
- with_hackdir=yes
-fi
-
-
-if test x"$with_hackdir" = xyes; then
- HACKDIR='${libexecdir}/xscreensaver'
-elif test x"$with_hackdir" = xno; then
- HACKDIR='${bindir}'
-else
- HACKDIR=$with_hackdir
-fi
-
-# canonicalize slashes.
-HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
-
-# Expand HACKDIR as HACKDIR_FULL
-HACKDIR_FULL=`eval eval eval eval eval eval eval eval eval echo $HACKDIR`
-
-# This option used to be called --enable-subdir; make sure that is no longer
-# used, since configure brain-damagedly ignores unknown --enable options.
-
-obsolete_enable=
-# Check whether --enable-subdir was given.
-if test "${enable_subdir+set}" = set; then
- enableval=$enable_subdir; obsolete_enable=yes
-fi
-
-if test -n "$obsolete_enable"; then
- echo "error: the --enable-subdir option has been replaced with"
- echo " the new --with-hackdir option; see \`configure --help'"
- echo " for more information."
- exit 1
-fi
-
-
-###############################################################################
-#
-# Handle the --with-configdir option
-# Help for --with-x-app-defaults option added..
-#
-###############################################################################
-
-have_configdir=yes
-with_configdir_req=unspecified
-
-# Check whether --with-configdir was given.
-if test "${with_configdir+set}" = set; then
- withval=$with_configdir; with_configdir="$withval"; with_configdir_req="$withval"
-else
- with_configdir=yes
-fi
-
-
-if test x"$with_configdir" = xyes; then
- HACK_CONF_DIR='${datadir}/xscreensaver/config'
-elif test x"$with_configdir" = xno; then
- echo "error: must be yes, or a pathname: --with-configdir=$with_configdir"
- exit 1
-else
- # there must be a better way than this...
- if test -z "`echo $with_configdir | sed 's@^/.*@@'`" ; then
- # absolute path
- HACK_CONF_DIR=$with_configdir
- else
- # relative path
- HACK_CONF_DIR="\${exec_prefix}$with_configdir"
- fi
-fi
-
-
-
-
-###############################################################################
-#
-# Check for the SGI SCREEN_SAVER server extension.
-#
-###############################################################################
-
-have_sgi=no
-with_sgi_req=unspecified
-
-# Check whether --with-sgi-ext was given.
-if test "${with_sgi_ext+set}" = set; then
- withval=$with_sgi_ext; with_sgi="$withval"; with_sgi_req="$withval"
-else
- with_sgi=yes
-fi
-
-
-
- case "$with_sgi" in
- yes) ;;
- no) ;;
-
- /*)
- { $as_echo "$as_me:$LINENO: checking for SGI SCREEN_SAVER headers" >&5
-$as_echo_n "checking for SGI SCREEN_SAVER headers... " >&6; }
- d=$with_sgi/include
- if test -d $d; then
- X_CFLAGS="-I$d $X_CFLAGS"
- { $as_echo "$as_me:$LINENO: result: $d" >&5
-$as_echo "$d" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
-$as_echo "not found ($d: no such directory)" >&6; }
- fi
-
- { $as_echo "$as_me:$LINENO: checking for SGI SCREEN_SAVER libs" >&5
-$as_echo_n "checking for SGI SCREEN_SAVER libs... " >&6; }
- d=$with_sgi/lib
- if test -d $d; then
- X_LIBS="-L$d $X_LIBS"
- { $as_echo "$as_me:$LINENO: result: $d" >&5
-$as_echo "$d" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
-$as_echo "not found ($d: no such directory)" >&6; }
- fi
-
- # replace the directory string with "yes".
- with_sgi_req="yes"
- with_sgi=$with_sgi_req
- ;;
-
- *)
- echo ""
- echo "error: argument to --with-sgi-ext must be \"yes\", \"no\", or a directory."
- echo " If it is a directory, then \`DIR/include' will be added to"
- echo " the -I list, and \`DIR/lib' will be added to the -L list."
- exit 1
- ;;
- esac
-
-
-if test "$with_sgi" = yes; then
-
- ac_save_CPPFLAGS="$CPPFLAGS"
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
- { $as_echo "$as_me:$LINENO: checking for X11/extensions/XScreenSaver.h" >&5
-$as_echo_n "checking for X11/extensions/XScreenSaver.h... " >&6; }
-if test "${ac_cv_header_X11_extensions_XScreenSaver_h+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <X11/Xlib.h>
-
-#include <X11/extensions/XScreenSaver.h>
-_ACEOF
-rm -rf conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -rf conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_X11_extensions_XScreenSaver_h=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_X11_extensions_XScreenSaver_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_XScreenSaver_h" >&5
-$as_echo "$ac_cv_header_X11_extensions_XScreenSaver_h" >&6; }
-if test "x$ac_cv_header_X11_extensions_XScreenSaver_h" = x""yes; then
- have_sgi=yes
- cat >>confdefs.h <<\_ACEOF
-#define HAVE_SGI_SAVER_EXTENSION 1
-_ACEOF
-
-fi
-
-
- CPPFLAGS="$ac_save_CPPFLAGS"
-
-elif test "$with_sgi" != no; then
- echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
- exit 1
-fi
-
-
-###############################################################################
-#
-# Check for the XIDLE server extension.
-#
-###############################################################################
-
-have_xidle=no
-with_xidle_req=unspecified
-
-# Check whether --with-xidle-ext was given.
-if test "${with_xidle_ext+set}" = set; then
- withval=$with_xidle_ext; with_xidle="$withval"; with_xidle_req="$withval"
-else
- with_xidle=yes
-fi
-
-
-
- case "$with_xidle" in
- yes) ;;
- no) ;;
-
- /*)
- { $as_echo "$as_me:$LINENO: checking for XIDLE headers" >&5
-$as_echo_n "checking for XIDLE headers... " >&6; }
- d=$with_xidle/include
- if test -d $d; then
- X_CFLAGS="-I$d $X_CFLAGS"
- { $as_echo "$as_me:$LINENO: result: $d" >&5
-$as_echo "$d" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
-$as_echo "not found ($d: no such directory)" >&6; }
- fi
-
- { $as_echo "$as_me:$LINENO: checking for XIDLE libs" >&5
-$as_echo_n "checking for XIDLE libs... " >&6; }
- d=$with_xidle/lib
- if test -d $d; then
- X_LIBS="-L$d $X_LIBS"
- { $as_echo "$as_me:$LINENO: result: $d" >&5
-$as_echo "$d" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
-$as_echo "not found ($d: no such directory)" >&6; }
- fi
-
- # replace the directory string with "yes".
- with_xidle_req="yes"
- with_xidle=$with_xidle_req
- ;;
-
- *)
- echo ""
- echo "error: argument to --with-xidle-ext must be \"yes\", \"no\", or a directory."
- echo " If it is a directory, then \`DIR/include' will be added to"
- echo " the -I list, and \`DIR/lib' will be added to the -L list."
- exit 1
- ;;
- esac
-
-
-if test "$with_xidle" = yes; then
-
- ac_save_CPPFLAGS="$CPPFLAGS"
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
- { $as_echo "$as_me:$LINENO: checking for X11/extensions/xidle.h" >&5
-$as_echo_n "checking for X11/extensions/xidle.h... " >&6; }
-if test "${ac_cv_header_X11_extensions_xidle_h+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <X11/Xlib.h>
-
-#include <X11/extensions/xidle.h>
-_ACEOF
-rm -rf conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -rf conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_X11_extensions_xidle_h=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_X11_extensions_xidle_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_xidle_h" >&5
-$as_echo "$ac_cv_header_X11_extensions_xidle_h" >&6; }
-if test "x$ac_cv_header_X11_extensions_xidle_h" = x""yes; then
- have_xidle=yes
- cat >>confdefs.h <<\_ACEOF
-#define HAVE_XIDLE_EXTENSION 1
-_ACEOF
-
-fi
-
-
- CPPFLAGS="$ac_save_CPPFLAGS"
-elif test "$with_xidle" != no; then
- echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
- exit 1
-fi
-
-
-###############################################################################
-#
-# Check for the SGI-VIDEO-CONTROL server extension.
-#
-###############################################################################
-
-have_sgivc=no
-with_sgivc_req=unspecified
-
-# Check whether --with-sgivc-ext was given.
-if test "${with_sgivc_ext+set}" = set; then
- withval=$with_sgivc_ext; with_sgivc="$withval"; with_sgivc_req="$withval"
-else
- with_sgivc=yes
-fi
-
-
-
- case "$with_sgivc" in
- yes) ;;
- no) ;;
-
- /*)
- { $as_echo "$as_me:$LINENO: checking for SGI-VIDEO-CONTROL headers" >&5
-$as_echo_n "checking for SGI-VIDEO-CONTROL headers... " >&6; }
- d=$with_sgivc/include
- if test -d $d; then
- X_CFLAGS="-I$d $X_CFLAGS"
- { $as_echo "$as_me:$LINENO: result: $d" >&5
-$as_echo "$d" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
-$as_echo "not found ($d: no such directory)" >&6; }
- fi
-
- { $as_echo "$as_me:$LINENO: checking for SGI-VIDEO-CONTROL libs" >&5
-$as_echo_n "checking for SGI-VIDEO-CONTROL libs... " >&6; }
- d=$with_sgivc/lib
- if test -d $d; then
- X_LIBS="-L$d $X_LIBS"
- { $as_echo "$as_me:$LINENO: result: $d" >&5
-$as_echo "$d" >&6; }
- else
- { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
-$as_echo "not found ($d: no such directory)" >&6; }
- fi
-
- # replace the directory string with "yes".
- with_sgivc_req="yes"
- with_sgivc=$with_sgivc_req
- ;;
-
- *)
- echo ""
- echo "error: argument to --with-sgivc-ext must be \"yes\", \"no\", or a directory."
- echo " If it is a directory, then \`DIR/include' will be added to"
- echo " the -I list, and \`DIR/lib' will be added to the -L list."
- exit 1
- ;;
- esac
-
-
-if test "$with_sgivc" = yes; then
-
- # first check for XSGIvc.h
-
- ac_save_CPPFLAGS="$CPPFLAGS"
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
- { $as_echo "$as_me:$LINENO: checking for X11/extensions/XSGIvc.h" >&5
-$as_echo_n "checking for X11/extensions/XSGIvc.h... " >&6; }
-if test "${ac_cv_header_X11_extensions_XSGIvc_h+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <X11/Xlib.h>
-
-#include <X11/extensions/XSGIvc.h>
-_ACEOF
-rm -rf conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -rf conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_X11_extensions_XSGIvc_h=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_X11_extensions_XSGIvc_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_XSGIvc_h" >&5
-$as_echo "$ac_cv_header_X11_extensions_XSGIvc_h" >&6; }
-if test "x$ac_cv_header_X11_extensions_XSGIvc_h" = x""yes; then
- have_sgivc=yes
-fi
-
-
- CPPFLAGS="$ac_save_CPPFLAGS"
-
- # if that succeeded, then check for the -lXsgivc
- if test "$have_sgivc" = yes; then
- have_sgivc=no
-
- ac_save_CPPFLAGS="$CPPFLAGS"
- ac_save_LDFLAGS="$LDFLAGS"
-# ac_save_LIBS="$LIBS"
-
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
- # note: $X_CFLAGS includes $x_includes
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
+ ac_cv_sunos_xmu_bug=no
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
- if test \! -z "$libdir" ; then
- LDFLAGS="$LDFLAGS -L$libdir"
- fi
- # note: $X_LIBS includes $x_libraries
- LDFLAGS="$LDFLAGS $X_LIBS $X_EXTRA_LIBS"
+ ac_cv_sunos_xmu_bug=yes
+fi
- CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
- LDFLAGS=`eval eval eval eval eval eval eval eval eval echo $LDFLAGS`
- { $as_echo "$as_me:$LINENO: checking for XSGIvcQueryGammaMap in -lXsgivc" >&5
-$as_echo_n "checking for XSGIvcQueryGammaMap in -lXsgivc... " >&6; }
-if test "${ac_cv_lib_Xsgivc_XSGIvcQueryGammaMap+set}" = set; then
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$ac_save_LDFLAGS"
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_sunos_xmu_bug" >&5
+$as_echo "$ac_cv_sunos_xmu_bug" >&6; }
+ if test "$ac_cv_sunos_xmu_bug" = yes ; then
+ { $as_echo "$as_me:$LINENO: checking whether the compiler understands -static" >&5
+$as_echo_n "checking whether the compiler understands -static... " >&6; }
+if test "${ac_cv_ld_static+set}" = set; then
$as_echo_n "(cached) " >&6
else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lXsgivc -lXext -lX11 $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
+ ac_save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -static"
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char XSGIvcQueryGammaMap ();
int
main ()
{
-return XSGIvcQueryGammaMap ();
+
;
return 0;
}
test "$cross_compiling" = yes ||
$as_test_x conftest$ac_exeext
}; then
- ac_cv_lib_Xsgivc_XSGIvcQueryGammaMap=yes
+ ac_cv_ld_static=yes
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_Xsgivc_XSGIvcQueryGammaMap=no
+ ac_cv_ld_static=no
fi
rm -rf conftest.dSYM
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
+ LDFLAGS="$ac_save_LDFLAGS"
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_ld_static" >&5
+$as_echo "$ac_cv_ld_static" >&6; }
+ if test "$ac_cv_ld_static" = yes ; then
+ LDFLAGS="$LDFLAGS -static"
+ else
+ LDFLAGS="$LDFLAGS -Bstatic"
+ fi
+ fi
+ ;;
+ esac
+fi
+
+
+###############################################################################
+#
+# Handle the --with-hackdir option
+#
+###############################################################################
+
+have_hackdir=yes
+with_hackdir_req=unspecified
+
+# Check whether --with-hackdir was given.
+if test "${with_hackdir+set}" = set; then
+ withval=$with_hackdir; with_hackdir="$withval"; with_hackdir_req="$withval"
+else
+ with_hackdir=yes
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xsgivc_XSGIvcQueryGammaMap" >&5
-$as_echo "$ac_cv_lib_Xsgivc_XSGIvcQueryGammaMap" >&6; }
-if test "x$ac_cv_lib_Xsgivc_XSGIvcQueryGammaMap" = x""yes; then
- have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"
+
+
+if test x"$with_hackdir" = xyes; then
+ HACKDIR='${libexecdir}/xscreensaver'
+elif test x"$with_hackdir" = xno; then
+ HACKDIR='${bindir}'
else
- true
+ HACKDIR=$with_hackdir
fi
- CPPFLAGS="$ac_save_CPPFLAGS"
- LDFLAGS="$ac_save_LDFLAGS"
-# LIBS="$ac_save_LIBS"
+# canonicalize slashes.
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
- fi
+# Expand HACKDIR as HACKDIR_FULL
+HACKDIR_FULL=`eval eval eval eval eval eval eval eval eval echo $HACKDIR`
- # if that succeeded, then we've really got it.
- if test "$have_sgivc" = yes; then
- cat >>confdefs.h <<\_ACEOF
-#define HAVE_SGI_VC_EXTENSION 1
-_ACEOF
+# This option used to be called --enable-subdir; make sure that is no longer
+# used, since configure brain-damagedly ignores unknown --enable options.
- fi
+obsolete_enable=
+# Check whether --enable-subdir was given.
+if test "${enable_subdir+set}" = set; then
+ enableval=$enable_subdir; obsolete_enable=yes
+fi
+
+if test -n "$obsolete_enable"; then
+ echo "error: the --enable-subdir option has been replaced with"
+ echo " the new --with-hackdir option; see \`configure --help'"
+ echo " for more information."
+ exit 1
+fi
+
+
+###############################################################################
+#
+# Handle the --with-configdir option
+# Help for --with-x-app-defaults option added.
+#
+###############################################################################
+
+have_configdir=yes
+with_configdir_req=unspecified
+
+# Check whether --with-configdir was given.
+if test "${with_configdir+set}" = set; then
+ withval=$with_configdir; with_configdir="$withval"; with_configdir_req="$withval"
+else
+ with_configdir=yes
+fi
-elif test "$with_sgivc" != no; then
- echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
+
+if test x"$with_configdir" = xyes; then
+ HACK_CONF_DIR='${datadir}/xscreensaver/config'
+elif test x"$with_configdir" = xno; then
+ echo "error: must be yes, or a pathname: --with-configdir=$with_configdir"
exit 1
+else
+ # there must be a better way than this...
+ if test -z "`echo $with_configdir | sed 's@^/.*@@'`" ; then
+ # absolute path
+ HACK_CONF_DIR=$with_configdir
+ else
+ # relative path
+ HACK_CONF_DIR="\${exec_prefix}$with_configdir"
+ fi
fi
+
+
+###############################################################################
+#
+# Check for the SGI SCREEN_SAVER server extension.
+#
+###############################################################################
+
+#have_sgi=no
+#with_sgi_req=unspecified
+#AC_ARG_WITH(sgi-ext,
+#[Except where noted, all of the --with options below can also take a
+#directory argument: for example, `--with-motif=/opt/Motif'. That would
+#cause /opt/Motif/include/ to be added to the -I list, and /opt/Motif/lib/
+#to be added to the -L list, assuming those directories exist.
+#
+#By default, support for each of these options will be built in, if the
+#relevant library routines exist. At run time, they will then be used
+#only if the X server being used supports them. Each --with option has
+#a corresponding --without option, to override building support for them
+#at all.
+#
+#Screen blanking and idle-detection options:
+#
+# --with-sgi-ext Include support for the SGI SCREEN_SAVER extension.],
+# [with_sgi="$withval"; with_sgi_req="$withval"],[with_sgi=yes])
+#
+#HANDLE_X_PATH_ARG(with_sgi, --with-sgi-ext, SGI SCREEN_SAVER)
+#
+#if test "$with_sgi" = yes; then
+# AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
+# [have_sgi=yes
+# AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)],,
+# [#include <X11/Xlib.h>])
+#
+#elif test "$with_sgi" != no; then
+# echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
+# exit 1
+#fi
+
+
+###############################################################################
+#
+# Check for the XIDLE server extension.
+#
+###############################################################################
+
+#have_xidle=no
+#with_xidle_req=unspecified
+#AC_ARG_WITH(xidle-ext,
+#[ --with-xidle-ext Include support for the XIDLE extension.],
+# [with_xidle="$withval"; with_xidle_req="$withval"],[with_xidle=yes])
+#
+#HANDLE_X_PATH_ARG(with_xidle, --with-xidle-ext, XIDLE)
+#
+#if test "$with_xidle" = yes; then
+# AC_CHECK_X_HEADER(X11/extensions/xidle.h,
+# [have_xidle=yes
+# AC_DEFINE(HAVE_XIDLE_EXTENSION)],,
+# [#include <X11/Xlib.h>])
+#elif test "$with_xidle" != no; then
+# echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
+# exit 1
+#fi
+
+
+###############################################################################
+#
+# Check for the SGI-VIDEO-CONTROL server extension.
+#
+###############################################################################
+
+#have_sgivc=no
+#with_sgivc_req=unspecified
+#AC_ARG_WITH(sgivc-ext,
+#[ --with-sgivc-ext Include support for the SGI-VIDEO-CONTROL extension.],
+# [with_sgivc="$withval"; with_sgivc_req="$withval"],[with_sgivc=yes])
+#
+#HANDLE_X_PATH_ARG(with_sgivc, --with-sgivc-ext, SGI-VIDEO-CONTROL)
+#
+#if test "$with_sgivc" = yes; then
+#
+# # first check for XSGIvc.h
+# AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes],,
+# [#include <X11/Xlib.h>])
+#
+# # if that succeeded, then check for the -lXsgivc
+# if test "$have_sgivc" = yes; then
+# have_sgivc=no
+# AC_CHECK_X_LIB(Xsgivc, XSGIvcQueryGammaMap,
+# [have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"], [true],
+# -lXext -lX11)
+# fi
+#
+# # if that succeeded, then we've really got it.
+# if test "$have_sgivc" = yes; then
+# AC_DEFINE(HAVE_SGI_VC_EXTENSION)
+# fi
+#
+#elif test "$with_sgivc" != no; then
+# echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
+# exit 1
+#fi
+
+
###############################################################################
#
# Check for the DPMS server extension.
fi
+# Check whether --enable-pam-check-account-type was given.
+if test "${enable_pam_check_account_type+set}" = set; then
+ enableval=$enable_pam_check_account_type; enable_pam_check_account_type="$enableval"
+else
+ enable_pam_check_account_type=no
+fi
+
+if test "$enable_pam_check_account_type" = yes ; then
+ cat >>confdefs.h <<\_ACEOF
+#define PAM_CHECK_ACCOUNT_TYPE 1
+_ACEOF
+
+ true
+elif test "$enable_pam_check_account_type" != no ; then
+ echo "error: must be yes or no: --enable-pam-check-account-type=$enable_pam_check_account_type"
+ exit 1
+fi
+
case "$with_pam" in
yes) ;;
$as_echo "adding \"$osx_crud\" to GL_LIBS" >&6; }
GL_LIBS="$GL_LIBS $osx_crud"
unset osx_crud
+
+ # New lossage in 10.6.8: we can't allow -L/opt/local/lib to be in the
+ # link line, or at runtime XQueryExtension gets a segv due to some kind
+ # of library version skew. Libs must come from /usr/X11/lib even if
+ # $prefix and/or $exec_prefix are set to /opt/local/.
+ #
+ { $as_echo "$as_me:$LINENO: result: omitting \"$libdir\" from LDFLAGS" >&5
+$as_echo "omitting \"$libdir\" from LDFLAGS" >&6; }
+ libdir=''
+
fi
$as_echo_n "(cached) " >&6
else
cat > conftest.$ac_ext <<EOF
-#line 17770 "configure"
+#line 17482 "configure"
#include "confdefs.h"
#include <GL/gl.h>
#ifndef MESA_MAJOR_VERSION
fi
+###############################################################################
+#
+# Handle --with-gles
+#
+###############################################################################
+
+with_gles_req=unspecified
+
+# Check whether --with-gles was given.
+if test "${with_gles+set}" = set; then
+ withval=$with_gles; with_gles="$withval"; with_gles_req="$withval"
+else
+ with_gles=no
+fi
+
+
+
+ case "$with_gles" in
+ yes) ;;
+ no) ;;
+
+ /*)
+ { $as_echo "$as_me:$LINENO: checking for JWZGLES headers" >&5
+$as_echo_n "checking for JWZGLES headers... " >&6; }
+ d=$with_gles/include
+ if test -d $d; then
+ X_CFLAGS="-I$d $X_CFLAGS"
+ { $as_echo "$as_me:$LINENO: result: $d" >&5
+$as_echo "$d" >&6; }
+ else
+ { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
+$as_echo "not found ($d: no such directory)" >&6; }
+ fi
+
+ { $as_echo "$as_me:$LINENO: checking for JWZGLES libs" >&5
+$as_echo_n "checking for JWZGLES libs... " >&6; }
+ d=$with_gles/lib
+ if test -d $d; then
+ X_LIBS="-L$d $X_LIBS"
+ { $as_echo "$as_me:$LINENO: result: $d" >&5
+$as_echo "$d" >&6; }
+ else
+ { $as_echo "$as_me:$LINENO: result: not found ($d: no such directory)" >&5
+$as_echo "not found ($d: no such directory)" >&6; }
+ fi
+
+ # replace the directory string with "yes".
+ with_gles_req="yes"
+ with_gles=$with_gles_req
+ ;;
+
+ *)
+ echo ""
+ echo "error: argument to --with-gles must be \"yes\", \"no\", or a directory."
+ echo " If it is a directory, then \`DIR/include' will be added to"
+ echo " the -I list, and \`DIR/lib' will be added to the -L list."
+ exit 1
+ ;;
+ esac
+
+
+if test "$with_gles" = yes; then
+ have_gles=yes
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_JWZGLES 1
+_ACEOF
+
+ JWZGLES_OBJS="jwzgles.o"
+ { $as_echo "$as_me:$LINENO: result: using OpenGL ES compatiblity shim" >&5
+$as_echo "using OpenGL ES compatiblity shim" >&6; }
+elif test "$with_gles" != no; then
+ echo "error: must be yes or no: --with-gles=$with_xpm"
+ exit 1
+fi
+
+# May want to phase out glBitmap even in a non-GLES world.
+#
+if test "$have_gles" = yes; then
+ GLFPS_OBJS="fps-gl.o glxfonts.o texfont.o"
+ GLFONT_OBJS=""
+else
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_GLBITMAP 1
+_ACEOF
+
+ GLFPS_OBJS="fps-gl.o glxfonts.o"
+ GLFONT_OBJS="texfont.o"
+fi
+
+
###############################################################################
#
# Check for -lgdk_pixbuf.
"/usr/share/doc/xserver-common/copyright" \
"/usr/share/doc/xserver-xorg-core/copyright" \
"/usr/X11R6/README" \
+ "/usr/share/doc/libX11*/COPYING" \
+ "/usr/X11/share/X11/doc/README*" \
"/usr/share/doc/debian/debian-manifesto" \
; do
if test -z "$with_textfile"; then
{ $as_echo "$as_me:$LINENO: checking for text file $f" >&5
$as_echo_n "checking for text file $f... " >&6; }
+ f=`/bin/ls $f 2>&- | head -1`
if test -f "$f" ; then
{ $as_echo "$as_me:$LINENO: result: yes" >&5
$as_echo "yes" >&6; }
PASSWD_OBJS="$PASSWD_OBJS \$(PAM_OBJS)"
INSTALL_PAM="install-pam"
fi
+if test "$enable_pam_check_account_type" = yes; then
+ COMMENT_PAM_CHECK_ACCOUNT=""
+else
+ COMMENT_PAM_CHECK_ACCOUNT="#"
+fi
if test "$have_passwd_helper" = yes; then
PASSWD_SRCS="$PASSWD_SRCS \$(PWHELPER_SRCS)"
PASSWD_OBJS="$PASSWD_OBJS \$(PWHELPER_OBJS)"
+
+
+
+
-ac_config_files="$ac_config_files Makefile utils/Makefile driver/Makefile hacks/Makefile hacks/glx/Makefile po/Makefile.in driver/XScreenSaver.ad"
+ac_config_files="$ac_config_files Makefile utils/Makefile driver/Makefile driver/xscreensaver.pam hacks/Makefile hacks/glx/Makefile po/Makefile.in driver/XScreenSaver.ad"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;;
"driver/Makefile") CONFIG_FILES="$CONFIG_FILES driver/Makefile" ;;
+ "driver/xscreensaver.pam") CONFIG_FILES="$CONFIG_FILES driver/xscreensaver.pam" ;;
"hacks/Makefile") CONFIG_FILES="$CONFIG_FILES hacks/Makefile" ;;
"hacks/glx/Makefile") CONFIG_FILES="$CONFIG_FILES hacks/glx/Makefile" ;;
"po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
projects / xscreensaver / blobdiff