--disable-locking Do not allow locking at all."
ac_help="$ac_help
+ --enable-vt-locking Compile in support for locking Virtual Terminals.
+ This is the default if the system supports it, and
+ if locking support is included (--enable-locking.)
+ --disable-vt-locking Do not allow locking of VTs, even if locking is
+ enabled."
+ac_help="$ac_help
+
--with-kerberos Include support for Kerberos authentication,
if possible (this is the default.)
--without-kerberos Do not compile in support for Kerberos."
+ac_help="$ac_help
+ --with-pam Include support for PAM (Pluggable Authentication
+ Modules) if possible (this is the default.)
+ --without-pam Do not compile in support for PAM."
ac_help="$ac_help
--with-shadow Include support for shadow password authentication,
- if possible (this is the default, if no Kerberos.)
+ if possible (this is the default, if no Kerberos or
+ PAM.)
--without-shadow Do not compile in support for shadow passwords.
"
+echo "current directory: `pwd`"
+echo "command line was: $0 $@"
+
+
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:650: checking host system type" >&5
+echo "configure:666: checking host system type" >&5
host_alias=$host
case "$host_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:674: checking for $ac_word" >&5
+echo "configure:690: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:703: checking for $ac_word" >&5
+echo "configure:719: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:751: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:767: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 761 "configure"
+#line 777 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:785: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:801: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:790: checking whether we are using GNU C" >&5
+echo "configure:806: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:799: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:814: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:830: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$GCC"; then
echo $ac_n "checking how to request ANSI compilation""... $ac_c" 1>&6
-echo "configure:844: checking how to request ANSI compilation" >&5
+echo "configure:860: checking how to request ANSI compilation" >&5
case "$host" in
*-hpux*)
echo "$ac_t""HPUX: adding -Ae" 1>&6
echo $ac_n "checking whether the compiler works on ANSI C""... $ac_c" 1>&6
-echo "configure:868: checking whether the compiler works on ANSI C" >&5
+echo "configure:884: checking whether the compiler works on ANSI C" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: Couldn't build even a trivial ANSI C program: check CC." 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 873 "configure"
+#line 889 "configure"
#include "confdefs.h"
main(int ac, char **av) { return 0; }
EOF
-if { (eval echo configure:877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
else
case "$host" in
- *-irix*)
+ *-irix5* |*-irix6.0-3* )
if test -n "$GCC"; then
echo "$ac_t""Turning on gcc compiler warnings." 1>&6
CC="$CC -Wall -Wstrict-prototypes -Wnested-externs -Wno-format"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:926: checking how to run the C preprocessor" >&5
+echo "configure:942: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 941 "configure"
+#line 957 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 958 "configure"
+#line 974 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:997: checking for a BSD compatible install" >&5
+echo "configure:1013: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
INSTALL_DIRS='${INSTALL} -d'
echo $ac_n "checking whether \"\${INSTALL} -d\" creates intermediate directories""... $ac_c" 1>&6
-echo "configure:1048: checking whether \"\${INSTALL} -d\" creates intermediate directories" >&5
+echo "configure:1064: checking whether \"\${INSTALL} -d\" creates intermediate directories" >&5
rm -rf conftestdir
if mkdir conftestdir; then
cd conftestdir >&-
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking whether \"mkdir -p\" creates intermediate directories""... $ac_c" 1>&6
-echo "configure:1059: checking whether \"mkdir -p\" creates intermediate directories" >&5
+echo "configure:1075: checking whether \"mkdir -p\" creates intermediate directories" >&5
rm -rf dir1
mkdir -p dir1/dir2 >&- 2>&-
if test -d dir1/dir2/. ; then
fi
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1074: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1090: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1102: checking for working const" >&5
+echo "configure:1118: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1107 "configure"
+#line 1123 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1156: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1172: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1177: checking for inline" >&5
+echo "configure:1193: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1184 "configure"
+#line 1200 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1191: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1207: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1218: checking for ANSI C header files" >&5
+echo "configure:1234: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1223 "configure"
+#line 1239 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1231: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1248 "configure"
+#line 1264 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1266 "configure"
+#line 1282 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1287 "configure"
+#line 1303 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1322: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1338: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1327 "configure"
+#line 1343 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1336: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1352: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1357: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1373: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1362 "configure"
+#line 1378 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1378: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1394: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1403: checking for $ac_hdr that defines DIR" >&5
+echo "configure:1419: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1408 "configure"
+#line 1424 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:1416: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1441: checking for opendir in -ldir" >&5
+echo "configure:1457: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1449 "configure"
+#line 1465 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1482: checking for opendir in -lx" >&5
+echo "configure:1498: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1490 "configure"
+#line 1506 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:1525: checking for mode_t" >&5
+echo "configure:1541: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1530 "configure"
+#line 1546 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1558: checking for pid_t" >&5
+echo "configure:1574: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1563 "configure"
+#line 1579 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1591: checking for size_t" >&5
+echo "configure:1607: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1596 "configure"
+#line 1612 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1624: checking return type of signal handlers" >&5
+echo "configure:1640: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1629 "configure"
+#line 1645 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:1646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking how to call gettimeofday""... $ac_c" 1>&6
-echo "configure:1666: checking how to call gettimeofday" >&5
+echo "configure:1682: checking how to call gettimeofday" >&5
if eval "test \"`echo '$''{'ac_cv_gettimeofday_args'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1671 "configure"
+#line 1687 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <sys/time.h>
gettimeofday(&tv, &tzp);
; return 0; }
EOF
-if { (eval echo configure:1680: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1696: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_gettimeofday_args=2
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 1688 "configure"
+#line 1704 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <sys/time.h>
struct timeval tv; gettimeofday(&tv);
; return 0; }
EOF
-if { (eval echo configure:1696: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_gettimeofday_args=1
else
fi
ac_gettimeofday_args=$ac_cv_gettimeofday_args
-if test $ac_gettimeofday_args = 1 ; then
+if test "$ac_gettimeofday_args" = 1 ; then
cat >> confdefs.h <<\EOF
#define HAVE_GETTIMEOFDAY 1
EOF
echo "$ac_t""one argument" 1>&6
-elif test $ac_gettimeofday_args = 2 ; then
+elif test "$ac_gettimeofday_args" = 2 ; then
cat >> confdefs.h <<\EOF
#define HAVE_GETTIMEOFDAY 1
EOF
for ac_func in select fcntl uname nice setpriority getcwd getwd putenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1736: checking for $ac_func" >&5
+echo "configure:1752: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1741 "configure"
+#line 1757 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
-for ac_func in sigaction
+for ac_func in sigaction syslog
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1791: checking for $ac_func" >&5
+echo "configure:1807: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1796 "configure"
+#line 1812 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
-for ac_hdr in unistd.h
+for ac_hdr in unistd.h crypt.h sys/select.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1848: checking for $ac_hdr" >&5
+echo "configure:1864: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1853 "configure"
+#line 1869 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1858: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
fi
+# canonicalize slashes.
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+
# If we find X, set shell vars x_includes and x_libraries to the
# paths, otherwise set no_x=yes.
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:1917: checking for X" >&5
+echo "configure:1936: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 1979 "configure"
+#line 1998 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2003: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2053 "configure"
+#line 2072 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:2060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:2166: checking whether -R must be followed by a space" >&5
+echo "configure:2185: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 2169 "configure"
+#line 2188 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 2192 "configure"
+#line 2211 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:2231: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:2250: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2239 "configure"
+#line 2258 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:2250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:2272: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:2291: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2280 "configure"
+#line 2299 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:2320: checking for gethostbyname" >&5
+echo "configure:2339: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2325 "configure"
+#line 2344 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2367: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:2369: checking for gethostbyname in -lnsl" >&5
+echo "configure:2388: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2377 "configure"
+#line 2396 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:2388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:2418: checking for connect" >&5
+echo "configure:2437: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2423 "configure"
+#line 2442 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:2446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:2467: checking for connect in -lsocket" >&5
+echo "configure:2486: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2475 "configure"
+#line 2494 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:2486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:2510: checking for remove" >&5
+echo "configure:2529: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2515 "configure"
+#line 2534 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:2538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:2559: checking for remove in -lposix" >&5
+echo "configure:2578: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2567 "configure"
+#line 2586 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:2578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:2602: checking for shmat" >&5
+echo "configure:2621: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2607 "configure"
+#line 2626 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:2630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:2651: checking for shmat in -lipc" >&5
+echo "configure:2670: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2659 "configure"
+#line 2678 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:2670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:2703: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:2722: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2711 "configure"
+#line 2730 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:2722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for X app-defaults directory""... $ac_c" 1>&6
-echo "configure:2759: checking for X app-defaults directory" >&5
+echo "configure:2778: checking for X app-defaults directory" >&5
if eval "test \"`echo '$''{'ac_cv_x_app_defaults'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 2906 "configure"
+#line 2925 "configure"
#include "confdefs.h"
#include <X11/XHPlib.h>
EOF
# Check for the availability of the XPointer typedef, and define it otherwise.
#
echo $ac_n "checking for XPointer""... $ac_c" 1>&6
-echo "configure:2927: checking for XPointer" >&5
+echo "configure:2946: checking for XPointer" >&5
if eval "test \"`echo '$''{'ac_cv_xpointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 2938 "configure"
+#line 2957 "configure"
#include "confdefs.h"
#include <X11/Xlib.h>
int main() {
XPointer foo = (XPointer) 0;
; return 0; }
EOF
-if { (eval echo configure:2945: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_xpointer=yes
else
fi
echo "$ac_t""$ac_cv_xpointer" 1>&6
-if test $ac_cv_xpointer != yes; then
+if test "$ac_cv_xpointer" != yes; then
cat >> confdefs.h <<\EOF
#define XPointer char*
EOF
# Some versions of Slowlaris Motif require -lgen. But not all. Why?
echo $ac_n "checking for regcmp in -lgen""... $ac_c" 1>&6
-echo "configure:3079: checking for regcmp in -lgen" >&5
+echo "configure:3098: checking for regcmp in -lgen" >&5
ac_lib_var=`echo gen'_'regcmp | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3087 "configure"
+#line 3106 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
regcmp()
; return 0; }
EOF
-if { (eval echo configure:3098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/Xmu/Error.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xmu/Error.h""... $ac_c" 1>&6
-echo "configure:3135: checking for X11/Xmu/Error.h" >&5
+echo "configure:3154: checking for X11/Xmu/Error.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3140 "configure"
+#line 3159 "configure"
#include "confdefs.h"
#include <X11/Xmu/Error.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3164: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
-if test $have_xmu = no ; then
+if test "$have_xmu" = no ; then
XMU_SRCS='$(UTILS_SRC)/xmu.c'
XMU_OBJS='$(UTILS_BIN)/xmu.o'
else
XMU_OBJS=''
SAVER_LIBS="-lXmu $SAVER_LIBS"
HACK_LIBS="-lXmu $HACK_LIBS"
+ TOOLKIT_LIBS="-lXmu $TOOLKIT_LIBS"
cat >> confdefs.h <<\EOF
#define HAVE_XMU 1
EOF
# See comp.windows.x FAQ question 124 about _get_wmShellWidgetClass on 4.1.x.
# The right fix is to get OpenWindows 3.0 patches 100512-02 and 100573-03.
#
-if test $have_xmu = yes ; then
+if test "$have_xmu" = yes ; then
case "$host" in
*-sunos4*)
echo $ac_n "checking for the SunOS 4.1.x _get_wmShellWidgetClass bug""... $ac_c" 1>&6
-echo "configure:3189: checking for the SunOS 4.1.x _get_wmShellWidgetClass bug" >&5
+echo "configure:3209: checking for the SunOS 4.1.x _get_wmShellWidgetClass bug" >&5
if eval "test \"`echo '$''{'ac_cv_sunos_xmu_bug'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# with X libraries because we know it's SunOS.
LDFLAGS="$LDFLAGS -lXmu -lXt -lX11 -lXext -lm"
cat > conftest.$ac_ext <<EOF
-#line 3202 "configure"
+#line 3222 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_sunos_xmu_bug=no
else
fi
echo "$ac_t""$ac_cv_sunos_xmu_bug" 1>&6
- if test $ac_cv_sunos_xmu_bug = yes ; then
+ if test "$ac_cv_sunos_xmu_bug" = yes ; then
echo $ac_n "checking whether the compiler understands -static""... $ac_c" 1>&6
-echo "configure:3225: checking whether the compiler understands -static" >&5
+echo "configure:3245: checking whether the compiler understands -static" >&5
if eval "test \"`echo '$''{'ac_cv_ld_static'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -static"
cat > conftest.$ac_ext <<EOF
-#line 3232 "configure"
+#line 3252 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_ld_static=yes
else
fi
echo "$ac_t""$ac_cv_ld_static" 1>&6
- if test $ac_cv_ld_static = yes ; then
+ if test "$ac_cv_ld_static" = yes ; then
LDFLAGS="$LDFLAGS -static"
else
LDFLAGS="$LDFLAGS -Bstatic"
/*)
echo $ac_n "checking for SGI SCREEN_SAVER headers""... $ac_c" 1>&6
-echo "configure:3284: checking for SGI SCREEN_SAVER headers" >&5
+echo "configure:3304: checking for SGI SCREEN_SAVER headers" >&5
d=$with_sgi/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for SGI SCREEN_SAVER libs""... $ac_c" 1>&6
-echo "configure:3294: checking for SGI SCREEN_SAVER libs" >&5
+echo "configure:3314: checking for SGI SCREEN_SAVER libs" >&5
d=$with_sgi/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_sgi = yes; then
+if test "$with_sgi" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/XScreenSaver.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/XScreenSaver.h""... $ac_c" 1>&6
-echo "configure:3332: checking for X11/extensions/XScreenSaver.h" >&5
+echo "configure:3352: checking for X11/extensions/XScreenSaver.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3337 "configure"
+#line 3357 "configure"
#include "confdefs.h"
#include <X11/extensions/XScreenSaver.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3342: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3362: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
CPPFLAGS="$ac_save_CPPFLAGS"
-elif test $with_sgi != no; then
+elif test "$with_sgi" != no; then
echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
exit 1
fi
/*)
echo $ac_n "checking for MIT-SCREEN-SAVER headers""... $ac_c" 1>&6
-echo "configure:3395: checking for MIT-SCREEN-SAVER headers" >&5
+echo "configure:3415: checking for MIT-SCREEN-SAVER headers" >&5
d=$with_mit/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for MIT-SCREEN-SAVER libs""... $ac_c" 1>&6
-echo "configure:3405: checking for MIT-SCREEN-SAVER libs" >&5
+echo "configure:3425: checking for MIT-SCREEN-SAVER libs" >&5
d=$with_mit/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $have_sgi != yes; then
- if test $with_mit = yes; then
+if test "$have_sgi" != yes; then
+ if test "$with_mit" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/scrnsaver.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/scrnsaver.h""... $ac_c" 1>&6
-echo "configure:3444: checking for X11/extensions/scrnsaver.h" >&5
+echo "configure:3464: checking for X11/extensions/scrnsaver.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3449 "configure"
+#line 3469 "configure"
#include "confdefs.h"
#include <X11/extensions/scrnsaver.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3454: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
# Now check to see if it's really in the library; XF86Free-3.3 ships
# scrnsaver.h, but doesn't include the code in libXext.a, the idiots!
#
- if test $have_mit = yes; then
+ if test "$have_mit" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for XScreenSaverRegister in -lXext""... $ac_c" 1>&6
-echo "configure:3498: checking for XScreenSaverRegister in -lXext" >&5
+echo "configure:3518: checking for XScreenSaverRegister in -lXext" >&5
ac_lib_var=`echo Xext'_'XScreenSaverRegister | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXext -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3506 "configure"
+#line 3526 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XScreenSaverRegister()
; return 0; }
EOF
-if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
CPPFLAGS="$ac_save_CPPFLAGS"
LDFLAGS="$ac_save_LDFLAGS"
- if test $have_mit = no; then
+ if test "$have_mit" = no; then
# Fuck! Looks like XF86Free-3.3 actually puts it in XExExt instead
# of in Xext. Thank you master, may I have another.
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for XScreenSaverRegister in -lXExExt""... $ac_c" 1>&6
-echo "configure:3568: checking for XScreenSaverRegister in -lXExExt" >&5
+echo "configure:3588: checking for XScreenSaverRegister in -lXExExt" >&5
ac_lib_var=`echo XExExt'_'XScreenSaverRegister | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXExExt -lX11 -lXext -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3576 "configure"
+#line 3596 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XScreenSaverRegister()
; return 0; }
EOF
-if { (eval echo configure:3587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
LDFLAGS="$ac_save_LDFLAGS"
fi
- if test $have_mit = no; then
+ if test "$have_mit" = no; then
# Double fuck! Looks like some versions of XFree86 (whichever version
# it is that comes with RedHat Linux 2.0 -- I can't find a version
# number) put this garbage in Xss instead of Xext. Thank you master,
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for XScreenSaverRegister in -lXss""... $ac_c" 1>&6
-echo "configure:3633: checking for XScreenSaverRegister in -lXss" >&5
+echo "configure:3653: checking for XScreenSaverRegister in -lXss" >&5
ac_lib_var=`echo Xss'_'XScreenSaverRegister | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXss -lX11 -lXext -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3641 "configure"
+#line 3661 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XScreenSaverRegister()
; return 0; }
EOF
-if { (eval echo configure:3652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
LDFLAGS="$ac_save_LDFLAGS"
fi
- if test $have_mit = yes; then
+ if test "$have_mit" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_MIT_SAVER_EXTENSION 1
EOF
fi
- elif test $with_mit != no; then
+ elif test "$with_mit" != no; then
echo "error: must be yes or no: --with-mit-ext=$with_mit"
exit 1
fi
/*)
echo $ac_n "checking for XIDLE headers""... $ac_c" 1>&6
-echo "configure:3712: checking for XIDLE headers" >&5
+echo "configure:3732: checking for XIDLE headers" >&5
d=$with_xidle/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for XIDLE libs""... $ac_c" 1>&6
-echo "configure:3722: checking for XIDLE libs" >&5
+echo "configure:3742: checking for XIDLE libs" >&5
d=$with_xidle/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_xidle = yes; then
+if test "$with_xidle" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/xidle.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/xidle.h""... $ac_c" 1>&6
-echo "configure:3760: checking for X11/extensions/xidle.h" >&5
+echo "configure:3780: checking for X11/extensions/xidle.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3765 "configure"
+#line 3785 "configure"
#include "confdefs.h"
#include <X11/extensions/xidle.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3770: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
-elif test $with_xidle != no; then
+elif test "$with_xidle" != no; then
echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
exit 1
fi
/*)
echo $ac_n "checking for XSHM headers""... $ac_c" 1>&6
-echo "configure:3822: checking for XSHM headers" >&5
+echo "configure:3842: checking for XSHM headers" >&5
d=$with_xshm/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for XSHM libs""... $ac_c" 1>&6
-echo "configure:3832: checking for XSHM libs" >&5
+echo "configure:3852: checking for XSHM libs" >&5
d=$with_xshm/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_xshm = yes; then
+if test "$with_xshm" = yes; then
# first check for Xshm.h.
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/XShm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/XShm.h""... $ac_c" 1>&6
-echo "configure:3872: checking for X11/extensions/XShm.h" >&5
+echo "configure:3892: checking for X11/extensions/XShm.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3877 "configure"
+#line 3897 "configure"
#include "confdefs.h"
#include <X11/extensions/XShm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
CPPFLAGS="$ac_save_CPPFLAGS"
# if that succeeded, then check for sys/ipc.h.
- if test $have_xshm = yes; then
+ if test "$have_xshm" = yes; then
have_xshm=no
ac_save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "sys/ipc.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/ipc.h""... $ac_c" 1>&6
-echo "configure:3916: checking for sys/ipc.h" >&5
+echo "configure:3936: checking for sys/ipc.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3921 "configure"
+#line 3941 "configure"
#include "confdefs.h"
#include <sys/ipc.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3946: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
# if that succeeded, then check for sys/shm.h.
- if test $have_xshm = yes; then
+ if test "$have_xshm" = yes; then
have_xshm=no
ac_save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "sys/shm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/shm.h""... $ac_c" 1>&6
-echo "configure:3961: checking for sys/shm.h" >&5
+echo "configure:3981: checking for sys/shm.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3966 "configure"
+#line 3986 "configure"
#include "confdefs.h"
#include <sys/shm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3991: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for XShmQueryExtension in -lXextSam""... $ac_c" 1>&6
-echo "configure:4020: checking for XShmQueryExtension in -lXextSam" >&5
+echo "configure:4040: checking for XShmQueryExtension in -lXextSam" >&5
ac_lib_var=`echo XextSam'_'XShmQueryExtension | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXextSam -lX11 -lXext -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4028 "configure"
+#line 4048 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XShmQueryExtension()
; return 0; }
EOF
-if { (eval echo configure:4039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
# if that succeeded, then we've really got it.
- if test $have_xshm = yes; then
+ if test "$have_xshm" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_XSHM_EXTENSION 1
EOF
fi
-elif test $with_xshm != no; then
+elif test "$with_xshm" != no; then
echo "error: must be yes or no: --with-xshm-ext=$with_xshm"
exit 1
fi
/*)
echo $ac_n "checking for SGI-VIDEO-CONTROL headers""... $ac_c" 1>&6
-echo "configure:4098: checking for SGI-VIDEO-CONTROL headers" >&5
+echo "configure:4118: checking for SGI-VIDEO-CONTROL headers" >&5
d=$with_sgivc/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for SGI-VIDEO-CONTROL libs""... $ac_c" 1>&6
-echo "configure:4108: checking for SGI-VIDEO-CONTROL libs" >&5
+echo "configure:4128: checking for SGI-VIDEO-CONTROL libs" >&5
d=$with_sgivc/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_sgivc = yes; then
+if test "$with_sgivc" = yes; then
# first check for XSGIvc.h
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/XSGIvc.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/XSGIvc.h""... $ac_c" 1>&6
-echo "configure:4148: checking for X11/extensions/XSGIvc.h" >&5
+echo "configure:4168: checking for X11/extensions/XSGIvc.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4153 "configure"
+#line 4173 "configure"
#include "confdefs.h"
#include <X11/extensions/XSGIvc.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4158: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4178: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
CPPFLAGS="$ac_save_CPPFLAGS"
# if that succeeded, then check for the -lXsgivc
- if test $have_sgivc = yes; then
+ if test "$have_sgivc" = yes; then
have_sgivc=no
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for XSGIvcQueryGammaMap in -lXsgivc""... $ac_c" 1>&6
-echo "configure:4201: checking for XSGIvcQueryGammaMap in -lXsgivc" >&5
+echo "configure:4221: checking for XSGIvcQueryGammaMap in -lXsgivc" >&5
ac_lib_var=`echo Xsgivc'_'XSGIvcQueryGammaMap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXsgivc -lXext -lX11 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4209 "configure"
+#line 4229 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XSGIvcQueryGammaMap()
; return 0; }
EOF
-if { (eval echo configure:4220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4240: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
# if that succeeded, then we've really got it.
- if test $have_sgivc = yes; then
+ if test "$have_sgivc" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_SGI_VC_EXTENSION 1
EOF
fi
-elif test $with_sgivc != no; then
+elif test "$with_sgivc" != no; then
echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
exit 1
fi
/*)
echo $ac_n "checking for DPMS headers""... $ac_c" 1>&6
-echo "configure:4278: checking for DPMS headers" >&5
+echo "configure:4298: checking for DPMS headers" >&5
d=$with_dpms/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for DPMS libs""... $ac_c" 1>&6
-echo "configure:4288: checking for DPMS libs" >&5
+echo "configure:4308: checking for DPMS libs" >&5
d=$with_dpms/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_dpms = yes; then
+if test "$with_dpms" = yes; then
# first check for dpms.h
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/dpms.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/dpms.h""... $ac_c" 1>&6
-echo "configure:4328: checking for X11/extensions/dpms.h" >&5
+echo "configure:4348: checking for X11/extensions/dpms.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4333 "configure"
+#line 4353 "configure"
#include "confdefs.h"
#include <X11/extensions/dpms.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
CPPFLAGS="$ac_save_CPPFLAGS"
# if that succeeded, then check for the -lXdpms
- if test $have_dpms = yes; then
+ if test "$have_dpms" = yes; then
have_dpms=no
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for DPMSInfo in -lXdpms""... $ac_c" 1>&6
-echo "configure:4381: checking for DPMSInfo in -lXdpms" >&5
+echo "configure:4401: checking for DPMSInfo in -lXdpms" >&5
ac_lib_var=`echo Xdpms'_'DPMSInfo | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXdpms -lXext -lX11 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4389 "configure"
+#line 4409 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
DPMSInfo()
; return 0; }
EOF
-if { (eval echo configure:4400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
# if that succeeded, then we've really got it.
- if test $have_dpms = yes; then
+ if test "$have_dpms" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_DPMS_EXTENSION 1
EOF
fi
-elif test $with_dpms != no; then
+elif test "$with_dpms" != no; then
echo "error: must be yes or no: --with-dpms-ext=$with_dpms"
exit 1
fi
/*)
echo $ac_n "checking for Motif headers""... $ac_c" 1>&6
-echo "configure:4463: checking for Motif headers" >&5
+echo "configure:4483: checking for Motif headers" >&5
d=$with_motif/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for Motif libs""... $ac_c" 1>&6
-echo "configure:4473: checking for Motif libs" >&5
+echo "configure:4493: checking for Motif libs" >&5
d=$with_motif/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
/*)
echo $ac_n "checking for Athena headers""... $ac_c" 1>&6
-echo "configure:4518: checking for Athena headers" >&5
+echo "configure:4538: checking for Athena headers" >&5
d=$with_athena/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for Athena libs""... $ac_c" 1>&6
-echo "configure:4528: checking for Athena libs" >&5
+echo "configure:4548: checking for Athena libs" >&5
d=$with_athena/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_motif != yes -a $with_motif != no ; then
+if test "$with_motif" != yes -a "$with_motif" != no ; then
echo "error: must be yes or no: --with-motif=$with_motif"
exit 1
fi
-if test $with_athena != yes -a $with_athena != no ; then
+if test "$with_athena" != yes -a "$with_athena" != no ; then
echo "error: must be yes or no: --with-athena=$with_athena"
exit 1
fi
# Saying --without-motif is the same as saying --with-athena.
-if test $with_motif_req = no ; then
+if test "$with_motif_req" = no ; then
with_athena_req=yes
with_athena=yes
fi
# Saying --without-athena is the same as saying --with-motif.
-if test $with_athena_req = no ; then
+if test "$with_athena_req" = no ; then
with_motif_req=yes
with_motif=yes
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "Xm/Xm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for Xm/Xm.h""... $ac_c" 1>&6
-echo "configure:4591: checking for Xm/Xm.h" >&5
+echo "configure:4611: checking for Xm/Xm.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4596 "configure"
+#line 4616 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4601: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4621: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
#define HAVE_MOTIF 1
EOF
- SAVER_LIBS="-lXm $SAVER_LIBS"
+ TOOLKIT_LIBS="-lXm $TOOLKIT_LIBS"
else
echo "$ac_t""no" 1>&6
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/Xaw/Dialog.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xaw/Dialog.h""... $ac_c" 1>&6
-echo "configure:4641: checking for X11/Xaw/Dialog.h" >&5
+echo "configure:4661: checking for X11/Xaw/Dialog.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4646 "configure"
+#line 4666 "configure"
#include "confdefs.h"
#include <X11/Xaw/Dialog.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4651: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
-
+ if test "$have_athena" = yes; then
+
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for Xaw3dComputeTopShadowRGB in -lXaw3d""... $ac_c" 1>&6
-echo "configure:4690: checking for Xaw3dComputeTopShadowRGB in -lXaw3d" >&5
+echo "configure:4711: checking for Xaw3dComputeTopShadowRGB in -lXaw3d" >&5
ac_lib_var=`echo Xaw3d'_'Xaw3dComputeTopShadowRGB | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXaw3d -lXt -lXmu -lXext -lX11 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4698 "configure"
+#line 4719 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
Xaw3dComputeTopShadowRGB()
; return 0; }
EOF
-if { (eval echo configure:4709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4730: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
CPPFLAGS="$ac_save_CPPFLAGS"
LDFLAGS="$ac_save_LDFLAGS"
+ fi
- if test $have_athena3d = yes; then
- SAVER_LIBS="-lXaw3d $SAVER_LIBS"
- elif test $have_athena = yes; then
- SAVER_LIBS="-lXaw $SAVER_LIBS"
+ if test "$have_athena3d" = yes; then
+ TOOLKIT_LIBS="-lXaw3d $TOOLKIT_LIBS"
+ elif test "$have_athena" = yes; then
+ TOOLKIT_LIBS="-lXaw $TOOLKIT_LIBS"
fi
}
# If they asked for neither, check motif then athena.
proselytize_motif=yes
-if test $with_motif = yes; then
+if test "$with_motif" = yes; then
# asked for both, or for motif only
check_motif
- if test $have_motif = yes; then
+ if test "$have_motif" = yes; then
with_athena=no
with_athena_req=no
else
check_athena
fi
-elif test $with_athena = yes; then
+elif test "$with_athena" = yes; then
# asked for athena only
check_athena
- if test $have_athena = yes; then
+ if test "$have_athena" = yes; then
with_motif=no
proselytize_motif=no
else
else
# asked for neither
check_motif
- if test $have_motif = yes; then
+ if test "$have_motif" = yes; then
with_athena=no
else
check_athena
fi
-if test $have_motif = yes; then
+if test "$have_motif" = yes; then
proselytize_motif=no
fi
# If we have Athena, check whether it's a version that includes
# XawViewportSetCoordinates in Viewport.h (R3 (or R4?) don't.)
-if test $have_athena = yes ; then
+if test "$have_athena" = yes ; then
echo $ac_n "checking for XawViewportSetCoordinates in Viewport.h""... $ac_c" 1>&6
-echo "configure:4785: checking for XawViewportSetCoordinates in Viewport.h" >&5
+echo "configure:4807: checking for XawViewportSetCoordinates in Viewport.h" >&5
if eval "test \"`echo '$''{'ac_cv_have_XawViewportSetCoordinates'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 4797 "configure"
+#line 4819 "configure"
#include "confdefs.h"
#include <X11/Xaw/Viewport.h>
EOF
fi
echo "$ac_t""$ac_cv_have_XawViewportSetCoordinates" 1>&6
- if test $ac_cv_have_XawViewportSetCoordinates = yes ; then
+ if test "$ac_cv_have_XawViewportSetCoordinates" = yes ; then
cat >> confdefs.h <<\EOF
#define HAVE_XawViewportSetCoordinates 1
EOF
# If we have Motif, check whether it's really LessTif.
#
have_lesstif=no
-if test $have_motif = yes ; then
+if test "$have_motif" = yes ; then
echo $ac_n "checking whether Motif is really LessTif""... $ac_c" 1>&6
-echo "configure:4826: checking whether Motif is really LessTif" >&5
+echo "configure:4848: checking whether Motif is really LessTif" >&5
if eval "test \"`echo '$''{'ac_cv_have_lesstif'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 4837 "configure"
+#line 4859 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
int main() {
long vers = LesstifVersion;
; return 0; }
EOF
-if { (eval echo configure:4844: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4866: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_lesstif=yes
else
lesstif_version=unknown
lesstif_version_string=unknown
-if test $have_lesstif = yes ; then
+if test "$have_lesstif" = yes ; then
ltv=unknown
echo unknown > conftest-lt
echo $ac_n "checking LessTif version number""... $ac_c" 1>&6
-echo "configure:4872: checking LessTif version number" >&5
+echo "configure:4894: checking LessTif version number" >&5
if eval "test \"`echo '$''{'ac_cv_lesstif_version_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_lesstif_version_string=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 4887 "configure"
+#line 4909 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <Xm/Xm.h>
exit(0);
}
EOF
-if { (eval echo configure:4900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ltv=`cat conftest-lt`
ac_cv_lesstif_version=`echo $ltv | sed 's/ .*//'`
# I have no idea.
#
have_xp_ext=no
-if test $have_motif = yes ; then
+if test "$have_motif" = yes ; then
have_xp_ext=no
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
- if test \! -z "$includedir" ; then
- CPPFLAGS="$CPPFLAGS -I$includedir"
- fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for XpQueryExtension in -lXp""... $ac_c" 1>&6
-echo "configure:4950: checking for XpQueryExtension in -lXp" >&5
+echo "configure:4972: checking for XpQueryExtension in -lXp" >&5
ac_lib_var=`echo Xp'_'XpQueryExtension | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXp -lX11 -lXext -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4958 "configure"
+#line 4980 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XpQueryExtension()
; return 0; }
EOF
-if { (eval echo configure:4969: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ have_xp_ext=yes; TOOLKIT_LIBS="$TOOLKIT_LIBS -lXp"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LDFLAGS="$ac_save_LDFLAGS"
+fi
+
+
+# Check for _Xsetlocale in -lXintl, since at least some recent versions
+# of Motif (on Linux) need it.
+#
+have_xintl=no
+if test "$have_motif" = yes ; then
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ ac_save_LDFLAGS="$LDFLAGS"
+
+ if test \! -z "$includedir" ; then
+ CPPFLAGS="$CPPFLAGS -I$includedir"
+ fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
+ if test \! -z "$libdir" ; then
+ LDFLAGS="$LDFLAGS -L$libdir"
+ fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
+ echo $ac_n "checking for _Xsetlocale in -lXintl""... $ac_c" 1>&6
+echo "configure:5038: checking for _Xsetlocale in -lXintl" >&5
+ac_lib_var=`echo Xintl'_'_Xsetlocale | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lXintl -lX11 -lXext -lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5046 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _Xsetlocale();
+
+int main() {
+_Xsetlocale()
+; return 0; }
+EOF
+if { (eval echo configure:5057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- have_xp_ext=yes; SAVER_LIBS="$SAVER_LIBS -lXp"
+ have_xintl=yes
else
echo "$ac_t""no" 1>&6
+have_xintl=no
fi
CPPFLAGS="$ac_save_CPPFLAGS"
LDFLAGS="$ac_save_LDFLAGS"
+ if test "$have_xintl" = yes; then
+ TOOLKIT_LIBS="$TOOLKIT_LIBS -lXintl"
+ fi
fi
/*)
echo $ac_n "checking for XPM headers""... $ac_c" 1>&6
-echo "configure:5014: checking for XPM headers" >&5
+echo "configure:5106: checking for XPM headers" >&5
d=$with_xpm/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for XPM libs""... $ac_c" 1>&6
-echo "configure:5024: checking for XPM libs" >&5
+echo "configure:5116: checking for XPM libs" >&5
d=$with_xpm/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_xpm = yes; then
+if test "$with_xpm" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/xpm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/xpm.h""... $ac_c" 1>&6
-echo "configure:5062: checking for X11/xpm.h" >&5
+echo "configure:5154: checking for X11/xpm.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5067 "configure"
+#line 5159 "configure"
#include "confdefs.h"
#include <X11/xpm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5164: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
-elif test $with_xpm != no; then
+elif test "$with_xpm" != no; then
echo "error: must be yes or no: --with-xpm=$with_xpm"
exit 1
fi
# check for the GL header
#
have_gl=no
+ac_have_mesa_gl=no
with_gl_req=unspecified
# Check whether --with-gl or --without-gl was given.
if test "${with_gl+set}" = set; then
/*)
echo $ac_n "checking for GL headers""... $ac_c" 1>&6
-echo "configure:5125: checking for GL headers" >&5
+echo "configure:5218: checking for GL headers" >&5
d=$with_gl/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for GL libs""... $ac_c" 1>&6
-echo "configure:5135: checking for GL libs" >&5
+echo "configure:5228: checking for GL libs" >&5
d=$with_gl/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
ac_mesagl_version=unknown
ac_mesagl_version_string=unknown
-if test $with_gl = yes; then
+if test "$with_gl" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
-echo "configure:5176: checking for GL/gl.h" >&5
+echo "configure:5269: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5181 "configure"
+#line 5274 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5186: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5279: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
- if test $have_gl = yes ; then
+ if test "$have_gl" = yes ; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "GL/glx.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/glx.h""... $ac_c" 1>&6
-echo "configure:5217: checking for GL/glx.h" >&5
+echo "configure:5310: checking for GL/glx.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5222 "configure"
+#line 5315 "configure"
#include "confdefs.h"
#include <GL/glx.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5227: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
# If we have the headers, try and figure out which vendor it's from.
#
- if test $have_gl = yes ; then
+ if test "$have_gl" = yes ; then
cat >> confdefs.h <<\EOF
#define HAVE_GL 1
# to link against.
#
echo $ac_n "checking whether GL is really MesaGL""... $ac_c" 1>&6
-echo "configure:5264: checking whether GL is really MesaGL" >&5
+echo "configure:5357: checking whether GL is really MesaGL" >&5
if eval "test \"`echo '$''{'ac_cv_have_mesa_gl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 5276 "configure"
+#line 5369 "configure"
#include "confdefs.h"
#include <GL/glx.h>
EOF
ac_have_mesa_gl=$ac_cv_have_mesa_gl
echo "$ac_t""$ac_have_mesa_gl" 1>&6
- if test $ac_have_mesa_gl = no ; then
+ if test "$ac_have_mesa_gl" = no ; then
gl_lib_1="GL"
GL_LIBS="-lGL -lGLU"
else
# If it's MesaGL, we'd like to issue a warning if the version number
# is less than or equal to 2.6, because that version had a security bug.
#
- if test $ac_have_mesa_gl = yes; then
+ if test "$ac_have_mesa_gl" = yes; then
# don't cache these.
unset ac_cv_mesagl_version
unset ac_cv_mesagl_version_string
echo $ac_n "checking MesaGL version number""... $ac_c" 1>&6
-echo "configure:5317: checking MesaGL version number" >&5
+echo "configure:5410: checking MesaGL version number" >&5
if eval "test \"`echo '$''{'ac_cv_mesagl_version_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5322 "configure"
+#line 5415 "configure"
#include "confdefs.h"
#include <GL/gl.h>
-#configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
+configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
EOF
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ if test \! -z "$includedir" ; then
+ CPPFLAGS="$CPPFLAGS -I$includedir"
+ fi
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
+ # M4 sucks!!
+
mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | sed -n \
- 's/^#configure:.*\([0-9][0-9]*\).*\([0-9][0-9]*\).*$/\1.\2/p'`
+ 's/^configure:.*\([0-9][0-9]*\).*\([0-9][0-9]*\).*$/\1.\2/p'`
+
+
+ rm -f conftest.$ac_ext
+
+ CPPFLAGS="$ac_save_CPPFLAGS"
+
if test "$mglv" = ""; then
ac_mesagl_version=unknown
ac_mesagl_version_string=unknown
maj=`echo $mglv | sed -n 's/\..*//p'`
min=`echo $mglv | sed -n 's/.*\.//p'`
ac_mesagl_version=`echo "$maj * 1000 + $min" | bc`
+ if test -z "$ac_mesagl_version"; then
+ ac_mesagl_version=unknown
+ ac_mesagl_version_string=unknown
+ fi
fi
ac_cv_mesagl_version=$ac_mesagl_version
ac_cv_mesagl_version_string=$ac_mesagl_version_string
fi
- # Check for OpenGL 1.1 features.
+ # If it's MesaGL, check to see if it requires -lpthread.
#
-
+ have_pthread=no
+ mesa_requires_pthread=false
+ if test "$ac_have_mesa_gl" = yes; then
+
+ echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
+echo "configure:5468: checking for pthread_create in -lpthread" >&5
+ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lpthread $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5476 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_create();
+
+int main() {
+pthread_create()
+; return 0; }
+EOF
+if { (eval echo configure:5487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ have_pthread=yes
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "$have_pthread" = yes; then
+
ac_save_CPPFLAGS="$CPPFLAGS"
ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
+ if test \! -z "$libdir" ; then
+ LDFLAGS="$LDFLAGS -L$libdir"
+ fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
+ echo $ac_n "checking for gl_get_thread_context in -l$gl_lib_1""... $ac_c" 1>&6
+echo "configure:5525: checking for gl_get_thread_context in -l$gl_lib_1" >&5
+ac_lib_var=`echo $gl_lib_1'_'gl_get_thread_context | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$gl_lib_1 $GL_LIBS -lpthread -lX11 -lXext -lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5533 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gl_get_thread_context();
+
+int main() {
+gl_get_thread_context()
+; return 0; }
+EOF
+if { (eval echo configure:5544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ mesa_requires_pthread=yes
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LDFLAGS="$ac_save_LDFLAGS"
+ fi
+
+ if test "$mesa_requires_pthread" = yes; then
+ GL_LIBS="$GL_LIBS -lpthread"
+ fi
+ fi
+
+ # Check for OpenGL 1.1 features.
+ #
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ ac_save_LDFLAGS="$LDFLAGS"
+
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS -I$includedir"
fi
+ # note: $X_CFLAGS includes $x_includes
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+
if test \! -z "$libdir" ; then
LDFLAGS="$LDFLAGS -L$libdir"
fi
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- if test \! -z "$x_libraries" ; then
- LDFLAGS="$LDFLAGS -L$x_libraries"
- fi
+ # note: $X_LIBS includes $x_libraries
+ LDFLAGS="$LDFLAGS $X_LIBS"
+
echo $ac_n "checking for glBindTexture in -l$gl_lib_1""... $ac_c" 1>&6
-echo "configure:5369: checking for glBindTexture in -l$gl_lib_1" >&5
+echo "configure:5592: checking for glBindTexture in -l$gl_lib_1" >&5
ac_lib_var=`echo $gl_lib_1'_'glBindTexture | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$gl_lib_1 $GL_LIBS -lX11 -lXext -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5377 "configure"
+#line 5600 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
glBindTexture()
; return 0; }
EOF
-if { (eval echo configure:5388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-elif test $with_gl != no; then
+elif test "$with_gl" != no; then
echo "error: must be yes or no: --with-gl=$with_gl"
exit 1
fi
/*)
echo $ac_n "checking for XReadDisplay headers""... $ac_c" 1>&6
-echo "configure:5442: checking for XReadDisplay headers" >&5
+echo "configure:5665: checking for XReadDisplay headers" >&5
d=$with_readdisplay/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for XReadDisplay libs""... $ac_c" 1>&6
-echo "configure:5452: checking for XReadDisplay libs" >&5
+echo "configure:5675: checking for XReadDisplay libs" >&5
d=$with_readdisplay/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_readdisplay = yes; then
+if test "$with_readdisplay" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "X11/extensions/readdisplay.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/readdisplay.h""... $ac_c" 1>&6
-echo "configure:5490: checking for X11/extensions/readdisplay.h" >&5
+echo "configure:5713: checking for X11/extensions/readdisplay.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5495 "configure"
+#line 5718 "configure"
#include "confdefs.h"
#include <X11/extensions/readdisplay.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5500: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5723: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
-elif test $with_readdisplay != no; then
+elif test "$with_readdisplay" != no; then
echo "error: must be yes or no: --with-readdisplay=$with_readdisplay"
exit 1
fi
/*)
echo $ac_n "checking for Iris Video headers""... $ac_c" 1>&6
-echo "configure:5551: checking for Iris Video headers" >&5
+echo "configure:5774: checking for Iris Video headers" >&5
d=$with_sgivideo/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for Iris Video libs""... $ac_c" 1>&6
-echo "configure:5561: checking for Iris Video libs" >&5
+echo "configure:5784: checking for Iris Video libs" >&5
d=$with_sgivideo/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
-if test $with_sgivideo = yes; then
+if test "$with_sgivideo" = yes; then
ac_save_CPPFLAGS="$CPPFLAGS"
if test \! -z "$includedir" ; then
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
ac_safe=`echo "dmedia/vl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for dmedia/vl.h""... $ac_c" 1>&6
-echo "configure:5599: checking for dmedia/vl.h" >&5
+echo "configure:5822: checking for dmedia/vl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5604 "configure"
+#line 5827 "configure"
#include "confdefs.h"
#include <dmedia/vl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
CPPFLAGS="$ac_save_CPPFLAGS"
- if test $have_sgivideo = yes; then
+ if test "$have_sgivideo" = yes; then
have_sgivideo=no
echo $ac_n "checking for vlOpenVideo in -lvl""... $ac_c" 1>&6
-echo "configure:5634: checking for vlOpenVideo in -lvl" >&5
+echo "configure:5857: checking for vlOpenVideo in -lvl" >&5
ac_lib_var=`echo vl'_'vlOpenVideo | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lvl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5642 "configure"
+#line 5865 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
vlOpenVideo()
; return 0; }
EOF
-if { (eval echo configure:5653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
- if test $have_sgivideo = yes; then
+ if test "$have_sgivideo" = yes; then
SGI_VIDEO_OBJS="$(UTILS_BIN)/sgivideo.o"
SGI_VIDEO_LIBS="-lvl"
cat >> confdefs.h <<\EOF
fi
fi
-elif test $with_sgivideo != no; then
+elif test "$with_sgivideo" != no; then
echo "error: must be yes or no: --with-sgivideo=$with_sgivideo"
exit 1
fi
case "$with_zippy_req" in
/*)
echo $ac_n "checking for $with_zippy_req""... $ac_c" 1>&6
-echo "configure:5721: checking for $with_zippy_req" >&5
+echo "configure:5944: checking for $with_zippy_req" >&5
if test -x "$with_zippy_req" ; then
echo "$ac_t""yes" 1>&6
else
# Extract the first word of "$with_zippy_req", so it can be a program name with args.
set dummy $with_zippy_req; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5735: checking for $ac_word" >&5
+echo "configure:5958: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_zip2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5781: checking for $ac_word" >&5
+echo "configure:6004: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_emacs_exe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5814: checking for $ac_word" >&5
+echo "configure:6037: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_xemacs_exe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$emacs_exe" ; then
echo $ac_n "checking for emacs yow""... $ac_c" 1>&6
-echo "configure:5848: checking for emacs yow" >&5
+echo "configure:6071: checking for emacs yow" >&5
#
# get emacs to tell us where the libexec directory is.
#
#
# try running libexec/yow and see if it exits without error.
#
- if test x"$dir" != x -a -x $dir/yow ; then
+ if test x"$dir" != x -a -x "$dir/yow" ; then
if $dir/yow >&- 2>&- ; then
ac_cv_zippy_program="$dir/yow"
echo "$ac_t""$ac_cv_zippy_program" 1>&6
if test -z "$ac_cv_zippy_program" ; then
echo $ac_n "checking for xemacs yow""... $ac_c" 1>&6
-echo "configure:5870: checking for xemacs yow" >&5
+echo "configure:6093: checking for xemacs yow" >&5
if test -n "$xemacs_exe" ; then
#
# get xemacs to tell us where the libexec directory is.
#
# try running libexec/yow and see if it exits without error.
#
- if test x"$dir" != x -a -x $dir/yow ; then
+ if test x"$dir" != x -a -x "$dir/yow" ; then
if $dir/yow >&- 2>&- ; then
ac_cv_zippy_program="$dir/yow"
echo "$ac_t""$ac_cv_zippy_program" 1>&6
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5916: checking for $ac_word" >&5
+echo "configure:6139: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_fortune'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5951: checking for $ac_word" >&5
+echo "configure:6174: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_fortune'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Allow locking to be disabled at compile-time.
#
-have_locking=yes
have_kerberos=no
with_kerberos_req=unspecified
have_shadow=no
with_shadow_req=unspecified
+have_pam=no
+with_pam_req=unspecified
need_setuid=no
# Check whether --enable-locking or --disable-locking was given.
enable_locking=yes
fi
-if test $enable_locking = yes; then
+if test "$enable_locking" = yes; then
+ true
+elif test "$enable_locking" = no; then
+ cat >> confdefs.h <<\EOF
+#define NO_LOCKING 1
+EOF
+
+else
+ echo "error: must be yes or no: --enable-locking=$enable_locking"
+ exit 1
+fi
+
+
+
+# Check to see if we can lock Virtual-Terminal switching, but allow that
+# to be disabled at compile-time.
+#
+ac_vt_lockswitch=no
+# Check whether --enable-vt-locking or --disable-vt-locking was given.
+if test "${enable_vt_locking+set}" = set; then
+ enableval="$enable_vt_locking"
+ enable_vt_locking="$enableval"
+else
+ enable_vt_locking=yes
+fi
+
+if test "$enable_vt_locking" = yes; then
+
+ echo $ac_n "checking for the VT_LOCKSWITCH ioctl""... $ac_c" 1>&6
+echo "configure:6269: checking for the VT_LOCKSWITCH ioctl" >&5
+ if eval "test \"`echo '$''{'ac_cv_vt_lockswitch'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6274 "configure"
+#include "confdefs.h"
+#include <fcntl.h>
+ #include <sys/ioctl.h>
+ #include <sys/vt.h>
+int main() {
+int x = VT_LOCKSWITCH; int y = VT_UNLOCKSWITCH;
+; return 0; }
+EOF
+if { (eval echo configure:6283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_vt_lockswitch=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_vt_lockswitch=no
+fi
+rm -f conftest*
+fi
+
+ ac_vt_lockswitch=$ac_cv_vt_lockswitch
+ echo "$ac_t""$ac_vt_lockswitch" 1>&6
+
+elif test "$enable_locking" = no; then
+ true
+else
+ echo "error: must be yes or no: --enable-vt-locking=$enable_vt_locking"
+ exit 1
+fi
+
+if test "$ac_vt_lockswitch" = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_VT_LOCKSWITCH 1
+EOF
+
+ # the VT_LOCKSWITCH ioctl can only be used when running as root.
+ # #### but it doesn't work yet, so don't worry about that for now.
+# need_setuid=yes
+fi
+
+
+
+if test "$enable_locking" = yes; then
# Check for Kerberos.
#
/*)
echo $ac_n "checking for Kerberos headers""... $ac_c" 1>&6
-echo "configure:6036: checking for Kerberos headers" >&5
+echo "configure:6337: checking for Kerberos headers" >&5
d=$with_kerberos/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for Kerberos libs""... $ac_c" 1>&6
-echo "configure:6046: checking for Kerberos libs" >&5
+echo "configure:6347: checking for Kerberos libs" >&5
d=$with_kerberos/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
- if test $with_kerberos = yes; then
+ if test "$with_kerberos" = yes; then
echo $ac_n "checking for Kerberos""... $ac_c" 1>&6
-echo "configure:6077: checking for Kerberos" >&5
+echo "configure:6378: checking for Kerberos" >&5
if eval "test \"`echo '$''{'ac_cv_kerberos'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 6088 "configure"
+#line 6389 "configure"
#include "confdefs.h"
#include <krb.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:6095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_kerberos=yes
else
fi
echo "$ac_t""$ac_cv_kerberos" 1>&6
- if test $ac_cv_kerberos = yes ; then
+ if test "$ac_cv_kerberos" = yes ; then
have_kerberos=yes
cat >> confdefs.h <<\EOF
#define HAVE_KERBEROS 1
# from Tim Showalter <tjs+@andrew.cmu.edu>
PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes"
echo $ac_n "checking for res_search""... $ac_c" 1>&6
-echo "configure:6119: checking for res_search" >&5
+echo "configure:6420: checking for res_search" >&5
if eval "test \"`echo '$''{'ac_cv_func_res_search'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6124 "configure"
+#line 6425 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char res_search(); below. */
; return 0; }
EOF
-if { (eval echo configure:6147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_res_search=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for res_search in -lresolv""... $ac_c" 1>&6
-echo "configure:6165: checking for res_search in -lresolv" >&5
+echo "configure:6466: checking for res_search in -lresolv" >&5
ac_lib_var=`echo resolv'_'res_search | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6173 "configure"
+#line 6474 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
res_search()
; return 0; }
EOF
-if { (eval echo configure:6184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6485: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
- elif test $with_kerberos != no; then
+ elif test "$with_kerberos" != no; then
echo "error: must be yes or no: --with-kerberos=$with_kerberos"
exit 1
fi
+
+ # Check for PAM.
+ # Check whether --with-pam or --without-pam was given.
+if test "${with_pam+set}" = set; then
+ withval="$with_pam"
+ with_pam="$withval"; with_pam_req="$withval"
+else
+ with_pam=no
+fi
+
+#### Leave PAM off by default for now, since it's buggy on Solaris
+#### (and probably Linux, but it's so hard to tell...)
+
+
+ case "$with_pam" in
+ yes) ;;
+ no) ;;
+
+ /*)
+ echo $ac_n "checking for PAM headers""... $ac_c" 1>&6
+echo "configure:6535: checking for PAM headers" >&5
+ d=$with_pam/include
+ if test -d $d; then
+ X_CFLAGS="-I$d $X_CFLAGS"
+ echo "$ac_t""$d" 1>&6
+ else
+ echo "$ac_t""not found ($d: no such directory)" 1>&6
+ fi
+
+ echo $ac_n "checking for PAM libs""... $ac_c" 1>&6
+echo "configure:6545: checking for PAM libs" >&5
+ d=$with_pam/lib
+ if test -d $d; then
+ X_LIBS="-L$d $X_LIBS"
+ echo "$ac_t""$d" 1>&6
+ else
+ echo "$ac_t""not found ($d: no such directory)" 1>&6
+ fi
+
+ # replace the directory string with "yes".
+ with_pam_req="yes"
+ with_pam=$with_pam_req
+ ;;
+
+ *)
+ echo ""
+ echo "error: argument to --with-pam must be \"yes\", \"no\", or a directory."
+ echo " If it is a directory, then \`DIR/include' will be added to"
+ echo " the -I list, and \`DIR/lib' will be added to the -L list."
+ exit 1
+ ;;
+ esac
+
+ # why is this necessary?
+ # if we don't do this, then "./configure --with-motif=/usr/local/lesstif"
+ # behaves as if "--with-zippy=/usr/local/lesstif" was also present!
+ withval=
+
+
+ if test "$with_pam" = yes; then
+ echo $ac_n "checking for PAM""... $ac_c" 1>&6
+echo "configure:6576: checking for PAM" >&5
+if eval "test \"`echo '$''{'ac_cv_pam'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ if test \! -z "$includedir" ; then
+ CPPFLAGS="$CPPFLAGS -I$includedir"
+ fi
+ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
+ cat > conftest.$ac_ext <<EOF
+#line 6587 "configure"
+#include "confdefs.h"
+#include <security/pam_appl.h>
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:6594: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_pam=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_pam=no
+fi
+rm -f conftest*
+ CPPFLAGS="$ac_save_CPPFLAGS"
+fi
+
+echo "$ac_t""$ac_cv_pam" 1>&6
+ if test "$ac_cv_pam" = yes ; then
+ have_pam=yes
+ cat >> confdefs.h <<\EOF
+#define HAVE_PAM 1
+EOF
+
+ PASSWD_LIBS="${PASSWD_LIBS} -lpam -ldl"
+ fi
+ elif test "$with_pam" != no; then
+ echo "error: must be yes or no: --with-pam=$with_pam"
+ exit 1
+ fi
# Next, check for the nine billion variants of shadow passwords...
- passwd_cruft_done=no
+ pwent_cruft_done=no
# Check whether --with-shadow or --without-shadow was given.
if test "${with_shadow+set}" = set; then
withval="$with_shadow"
/*)
echo $ac_n "checking for shadow password headers""... $ac_c" 1>&6
-echo "configure:6234: checking for shadow password headers" >&5
+echo "configure:6640: checking for shadow password headers" >&5
d=$with_shadow/include
if test -d $d; then
X_CFLAGS="-I$d $X_CFLAGS"
fi
echo $ac_n "checking for shadow password libs""... $ac_c" 1>&6
-echo "configure:6244: checking for shadow password libs" >&5
+echo "configure:6650: checking for shadow password libs" >&5
d=$with_shadow/lib
if test -d $d; then
X_LIBS="-L$d $X_LIBS"
withval=
- if test $with_shadow = no; then
- passwd_cruft_done=yes
- elif test $with_shadow != yes; then
+ if test "$with_shadow" = no; then
+ pwent_cruft_done=yes
+ elif test "$with_shadow" != yes; then
echo "error: must be yes or no: --with-shadow=$with_shadow"
exit 1
fi
# Sun's "adjunct" passwords.
#
- if test $passwd_cruft_done = no ; then
+ if test "$pwent_cruft_done" = no ; then
echo $ac_n "checking for Sun-style shadow passwords""... $ac_c" 1>&6
-echo "configure:6285: checking for Sun-style shadow passwords" >&5
+echo "configure:6691: checking for Sun-style shadow passwords" >&5
if eval "test \"`echo '$''{'ac_cv_sun_adjunct'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 6296 "configure"
+#line 6702 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <unistd.h>
const char *pw = p->pwa_passwd;
; return 0; }
EOF
-if { (eval echo configure:6309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sun_adjunct=yes
else
fi
echo "$ac_t""$ac_cv_sun_adjunct" 1>&6
- if test $ac_cv_sun_adjunct = yes; then
+ if test "$ac_cv_sun_adjunct" = yes; then
have_shadow=yes
need_setuid=yes
- passwd_cruft_done=yes
+ pwent_cruft_done=yes
cat >> confdefs.h <<\EOF
#define HAVE_ADJUNCT_PASSWD 1
EOF
# DEC and SCO so-called "enhanced" security.
#
- if test $passwd_cruft_done = no ; then
+ if test "$pwent_cruft_done" = no ; then
echo $ac_n "checking for DEC-style shadow passwords""... $ac_c" 1>&6
-echo "configure:6338: checking for DEC-style shadow passwords" >&5
+echo "configure:6744: checking for DEC-style shadow passwords" >&5
if eval "test \"`echo '$''{'ac_cv_enhanced_passwd'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 6349 "configure"
+#line 6755 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <unistd.h>
pw = p->ufld.fd_encrypt;
; return 0; }
EOF
-if { (eval echo configure:6366: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_enhanced_passwd=yes
else
if test $ac_cv_enhanced_passwd = yes; then
have_shadow=yes
need_setuid=yes
- passwd_cruft_done=yes
+ pwent_cruft_done=yes
cat >> confdefs.h <<\EOF
#define HAVE_ENHANCED_PASSWD 1
EOF
# On SCO, getprpwnam() is in -lprot (which uses nap() from -lx)
# (I'm told it needs -lcurses too, but I don't understand why.)
echo $ac_n "checking for getprpwnam in -lprot""... $ac_c" 1>&6
-echo "configure:6392: checking for getprpwnam in -lprot" >&5
+echo "configure:6798: checking for getprpwnam in -lprot" >&5
ac_lib_var=`echo prot'_'getprpwnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lprot -lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6400 "configure"
+#line 6806 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getprpwnam()
; return 0; }
EOF
-if { (eval echo configure:6411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
# On DEC, getprpwnam() is in -lsecurity
echo $ac_n "checking for getprpwnam in -lsecurity""... $ac_c" 1>&6
-echo "configure:6431: checking for getprpwnam in -lsecurity" >&5
+echo "configure:6837: checking for getprpwnam in -lsecurity" >&5
ac_lib_var=`echo security'_'getprpwnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsecurity $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6439 "configure"
+#line 6845 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getprpwnam()
; return 0; }
EOF
-if { (eval echo configure:6450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# HP's entry in the "Not Invented Here" Sweepstakes.
#
- if test $passwd_cruft_done = no ; then
+ if test "$pwent_cruft_done" = no ; then
echo $ac_n "checking for HP-style shadow passwords""... $ac_c" 1>&6
-echo "configure:6479: checking for HP-style shadow passwords" >&5
+echo "configure:6885: checking for HP-style shadow passwords" >&5
if eval "test \"`echo '$''{'ac_cv_hpux_passwd'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 6490 "configure"
+#line 6896 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <unistd.h>
const char *pw = p->pw_passwd;
; return 0; }
EOF
-if { (eval echo configure:6503: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_hpux_passwd=yes
else
fi
echo "$ac_t""$ac_cv_hpux_passwd" 1>&6
- if test $ac_cv_hpux_passwd = yes; then
+ if test "$ac_cv_hpux_passwd" = yes; then
have_shadow=yes
need_setuid=yes
- passwd_cruft_done=yes
+ pwent_cruft_done=yes
cat >> confdefs.h <<\EOF
#define HAVE_HPUX_PASSWD 1
EOF
# on HPUX, bigcrypt is in -lsec
echo $ac_n "checking for bigcrypt in -lsec""... $ac_c" 1>&6
-echo "configure:6528: checking for bigcrypt in -lsec" >&5
+echo "configure:6934: checking for bigcrypt in -lsec" >&5
ac_lib_var=`echo sec'_'bigcrypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsec $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6536 "configure"
+#line 6942 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bigcrypt()
; return 0; }
EOF
-if { (eval echo configure:6547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Traditional (ha!) shadow passwords.
#
- if test $passwd_cruft_done = no ; then
+ if test "$pwent_cruft_done" = no ; then
echo $ac_n "checking for generic shadow passwords""... $ac_c" 1>&6
-echo "configure:6574: checking for generic shadow passwords" >&5
+echo "configure:6980: checking for generic shadow passwords" >&5
if eval "test \"`echo '$''{'ac_cv_shadow'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 6585 "configure"
+#line 6991 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <unistd.h>
const char *pw = p->sp_pwdp;
; return 0; }
EOF
-if { (eval echo configure:6597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_shadow=yes
else
fi
echo "$ac_t""$ac_cv_shadow" 1>&6
- if test $ac_cv_shadow = yes; then
+ if test "$ac_cv_shadow" = yes; then
have_shadow=yes
need_setuid=yes
- passwd_cruft_done=yes
+ pwent_cruft_done=yes
cat >> confdefs.h <<\EOF
#define HAVE_SHADOW_PASSWD 1
EOF
# On some systems (UnixWare 2.1), getspnam() is in -lgen instead of -lc.
have_getspnam=no
echo $ac_n "checking for getspnam in -lc""... $ac_c" 1>&6
-echo "configure:6623: checking for getspnam in -lc" >&5
+echo "configure:7029: checking for getspnam in -lc" >&5
ac_lib_var=`echo c'_'getspnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6631 "configure"
+#line 7037 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getspnam()
; return 0; }
EOF
-if { (eval echo configure:6642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:7048: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
- if test $have_getspnam = no ; then
+ if test "$have_getspnam" = no ; then
echo $ac_n "checking for getspnam in -lgen""... $ac_c" 1>&6
-echo "configure:6664: checking for getspnam in -lgen" >&5
+echo "configure:7070: checking for getspnam in -lgen" >&5
ac_lib_var=`echo gen'_'getspnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6672 "configure"
+#line 7078 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getspnam()
; return 0; }
EOF
-if { (eval echo configure:6683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:7089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# program is setuid. So, guess that we've got this lossage to contend with
# if /etc/master.passwd exists, and default to a setuid installation.
#
- if test $passwd_cruft_done = no ; then
+ if test "$pwent_cruft_done" = no ; then
echo $ac_n "checking for FreeBSD-style shadow passwords""... $ac_c" 1>&6
-echo "configure:6714: checking for FreeBSD-style shadow passwords" >&5
+echo "configure:7120: checking for FreeBSD-style shadow passwords" >&5
if eval "test \"`echo '$''{'ac_cv_master_passwd'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_master_passwd" 1>&6
- if test $ac_cv_master_passwd = yes; then
+ if test "$ac_cv_master_passwd" = yes; then
need_setuid=yes
- passwd_cruft_done=yes
+ pwent_cruft_done=yes
fi
fi
# On some systems (UnixWare 2.1), crypt() is in -lcrypt instead of -lc.
have_crypt=no
echo $ac_n "checking for crypt in -lc""... $ac_c" 1>&6
-echo "configure:6735: checking for crypt in -lc" >&5
+echo "configure:7141: checking for crypt in -lc" >&5
ac_lib_var=`echo c'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6743 "configure"
+#line 7149 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:6754: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:7160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
- if test $have_crypt = no ; then
+ if test "$have_crypt" = no ; then
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:6776: checking for crypt in -lcrypt" >&5
+echo "configure:7182: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6784 "configure"
+#line 7190 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:6795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:7201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# if they were found. But, on some systems, we need setuid even when
# using plain old vanilla passwords.
#
- if test $need_setuid = no ; then
+ if test "$need_setuid" = no ; then
case "$host" in
*-hpux* | *-aix* | *-netbsd* | *-freebsd* | *-openbsd* )
need_setuid=yes
esac
fi
-elif test $enable_locking = no; then
- cat >> confdefs.h <<\EOF
-#define NO_LOCKING 1
-EOF
-
-else
- echo "error: must be yes or no: --enable-locking=$enable_locking"
- exit 1
fi
-
if test \! -z "$includedir" ; then
INCLUDES="-I$includedir"
fi
# Done testing things -- now substitute in some stuff for the Makefiles.
#
-if test $have_motif = yes; then
+if test "$have_motif" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_MOTIF 1
EOF
- DIALOG_SRCS='$(MOTIF_SRCS)'
- DIALOG_OBJS='$(MOTIF_OBJS)'
-elif test $have_athena = yes; then
+ TOOLKIT_SRCS='$(MOTIF_SRCS)'
+ TOOLKIT_OBJS='$(MOTIF_OBJS)'
+elif test "$have_athena" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ATHENA 1
EOF
- DIALOG_SRCS='$(ATHENA_SRCS)'
- DIALOG_OBJS='$(ATHENA_OBJS)'
+ TOOLKIT_SRCS='$(ATHENA_SRCS)'
+ TOOLKIT_OBJS='$(ATHENA_OBJS)'
else
- DIALOG_SRCS=''
- DIALOG_OBJS=''
+ TOOLKIT_SRCS=''
+ TOOLKIT_OBJS=''
fi
-if test $have_kerberos = yes; then
- PASSWD_SRCS='$(KERBEROS_SRCS)'
- PASSWD_OBJS='$(KERBEROS_OBJS)'
-else
- PASSWD_SRCS='$(PWENT_SRCS)'
- PASSWD_OBJS='$(PWENT_OBJS)'
+if test "$have_kerberos" = yes; then
+ PASSWD_SRCS="$PASSWD_SRCS \$(KERBEROS_SRCS)"
+ PASSWD_OBJS="$PASSWD_OBJS \$(KERBEROS_OBJS)"
fi
+if test "$have_pam" = yes; then
+ PASSWD_SRCS="$PASSWD_SRCS \$(PAM_SRCS)"
+ PASSWD_OBJS="$PASSWD_OBJS \$(PAM_OBJS)"
+ INSTALL_PAM="install-pam"
+fi
+ PASSWD_SRCS="$PASSWD_SRCS \$(PWENT_SRCS)"
+ PASSWD_OBJS="$PASSWD_OBJS \$(PWENT_OBJS)"
+
-if test $enable_locking = yes; then
+if test "$enable_locking" = yes; then
LOCK_SRCS='$(LOCK_SRCS_1) $(PASSWD_SRCS)'
LOCK_OBJS='$(LOCK_OBJS_1) $(PASSWD_OBJS)'
else
LOCK_OBJS=''
fi
-if test $need_setuid = yes; then
+if test "$need_setuid" = yes; then
NEED_SETUID=yes
INSTALL_SETUID='$(INSTALL) $(SUID_FLAGS)'
else
fi
tab=' '
-if test $have_gl = yes; then
+if test "$have_gl" = yes; then
GL_EXES='$(GL_EXES)'
- GL_KLUDGE_1=${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}' \'
- GL_KLUDGE_2=${tab}
+ GL_KLUDGE=${tab}
else
- GL_KLUDGE_1=${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}${tab}'\n'
- GL_KLUDGE_2='!'${tab}
+ GL_KLUDGE=' -'${tab}
fi
+
# Print some warnings before emitting the Makefiles.
warnsep=' #################################################################'
warnpre() {
- if test $warning = no ; then
+ if test "$warning" = no ; then
echo '' ; echo "$warnsep" ; echo ''
warning=yes
fi
warn() {
warnpre
- if test $warning = long ; then echo '' ; fi
+ if test "$warning" = long ; then echo '' ; fi
warning=yes
echo "$warn_prefix $@"
}
was=$warning
warnpre
warning=yes
- if test $was != no ; then echo '' ; fi
+ if test "$was" != no ; then echo '' ; fi
echo "$warn_prefix $@"
}
}
-if test $with_sgi_req = yes -a $have_sgi = no ; then
+if test "$with_sgi_req" = yes -a "$have_sgi" = no ; then
warn 'The SGI saver extension was requested, but was not found.'
fi
-if test $with_mit_req = yes -a $have_mit = no ; then
+if test "$with_mit_req" = yes -a "$have_mit" = no ; then
warn 'The MIT saver extension was requested, but was not found.'
fi
-if test $with_xidle_req = yes -a $have_xidle = no ; then
+if test "$with_xidle_req" = yes -a "$have_xidle" = no ; then
warn 'The XIdle extension was requested, but was not found.'
fi
-if test $with_xshm_req = yes -a $have_xshm = no ; then
+if test "$with_xshm_req" = yes -a "$have_xshm" = no ; then
warn 'The XSHM extension was requested, but was not found.'
fi
-if test $with_sgivc_req = yes -a $have_sgivc = no ; then
+if test "$with_sgivc_req" = yes -a "$have_sgivc" = no ; then
warn 'The SGI-VIDEO-CONTROL extension was requested, but was not found.'
fi
-if test $with_dpms_req = yes -a $have_dpms = no ; then
+if test "$with_dpms_req" = yes -a "$have_dpms" = no ; then
warn 'The DPMS extension was requested, but was not found.'
fi
-if test $have_motif = no -a $have_athena = no ; then
+if test "$have_motif" = no -a "$have_athena" = no ; then
warnL "Neither Motif nor Athena widgets seem to be available;"
- warn2 "one or the other is required."
+ warn2 "the \`xscreensaver-demo' program requires one or the"
+ warn2 "other."
proselytize_motif=no
-elif test $with_motif_req = yes -a $have_motif = no ; then
+elif test "$with_motif_req" = yes -a "$have_motif" = no ; then
warnL "Use of Motif was requested, but it wasn't found;"
warn2 "Athena will be used instead."
-elif test $with_athena_req = yes -a $have_athena = no ; then
+elif test "$with_athena_req" = yes -a "$have_athena" = no ; then
warnL "Use of Athena was requested, but it wasn't found;"
warn2 "Motif will be used instead."
fi
-if test $have_motif = yes -a $have_lesstif = yes ; then
+if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
- preferred_lesstif=0.87
+ preferred_lesstif=0.86
- if test $lesstif_version = unknown; then
+ if test "$lesstif_version" = unknown; then
warnL "Unable to determine the LessTif version number!"
warn2 "Make sure you are using version $preferred_lesstif or newer."
warn2 "See <http://www.lesstif.org/>."
warn2 "use with XScreenSaver; it is strongly recommended"
warn2 "that you upgrade to at least version $preferred_lesstif!"
warn2 "See <http://www.lesstif.org/>."
-
- elif test \! $lesstif_version -gt 86; then
- warnL "LessTif version $lesstif_version_string is being used."
- warn2 "LessTif versions 0.86 and earlier have a bug that"
- warn2 "can cause a security problem with xscreensaver."
- warn2 "If you want to use xscreensaver as a screen locker,"
- warn2 "it is strongly recommended that you upgrade to at"
- warn2 "least version $preferred_lesstif. See <http://www.lesstif.org/>."
fi
fi
-if test $proselytize_motif = yes ; then
+if test "$proselytize_motif" = yes ; then
warnL "Athena widgets are being used instead of Motif."
- warn2 "XScreenSaver looks much better with Motif, and has"
- warn2 "a few extra features as well. Wouldn't you rather"
- warn2 "be using Motif? It is shipped by every commercial"
- warn2 "Unix vendor; and there is a free implementation"
- warn2 "available as well: see <http://www.lesstif.org/>."
+ warn2 "The \`xscreensaver-demo' program looks much better"
+ warn2 "with Motif. Wouldn't you rather be using Motif?"
+ warn2 "It is shipped by every commercial Unix vendor;"
+ warn2 "and there is a free implementation available as"
+ warn2 "well: see <http://www.lesstif.org/>."
fi
-if test $have_gl = yes -a $ac_have_mesa_gl = yes ; then
+if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then
preferred_mesagl=2.7
- if test $ac_mesagl_version = unknown; then
+ if test "$ac_mesagl_version" = unknown; then
warnL "Unable to determine the MesaGL version number!"
warn2 "Make sure you are using version $preferred_mesagl or newer."
- elif test \! $ac_mesagl_version -gt 2006; then
+ elif test \! "$ac_mesagl_version" -gt 2006; then
warnL "MesaGL version $ac_mesagl_version_string is being used."
warn2 "MesaGL versions 2.6 and earlier have a security bug."
warn2 "It is strongly recommended that you upgrade to at"
fi
-if test $have_xpm = no ; then
- if test $with_xpm_req = yes ; then
+if test "$have_xpm" = no ; then
+ if test "$with_xpm_req" = yes ; then
warnL 'Use of XPM was requested, but it was not found.'
- elif test $with_xpm_req = no ; then
+ elif test "$with_xpm_req" = no ; then
noteL 'The XPM library is not being used.'
else
noteL 'The XPM library was not found.'
warn2 'X11 archive sites, such as <http://sunsite.unc.edu/>.'
fi
-if test $have_gl = no ; then
- if test $with_gl_req = yes ; then
+if test "$have_gl" = no ; then
+ if test "$with_gl_req" = yes ; then
warnL 'Use of GL was requested, but it was not found.'
- elif test $with_gl_req = no ; then
+ elif test "$with_gl_req" = no ; then
noteL 'The OpenGL 3D library is not being used.'
else
noteL 'The OpenGL 3D library was not found.'
fi
-if test $with_readdisplay_req = yes -a $have_readdisplay = no ; then
+if test "$with_readdisplay_req" = yes -a "$have_readdisplay" = no ; then
warn 'Use of XReadDisplay was requested, but it was not found.'
fi
-if test $with_sgivideo_req = yes -a $have_sgivideo = no ; then
+if test "$with_sgivideo_req" = yes -a "$have_sgivideo" = no ; then
warn 'Use of the Iris Video Library was requested, but it was not found.'
fi
-if test $with_kerberos_req = yes -a $have_kerberos = no ; then
+if test "$with_kerberos_req" = yes -a "$have_kerberos" = no ; then
warn 'Use of Kerberos was requested, but it was not found.'
fi
-if test $with_shadow_req = yes -a $have_shadow = no ; then
+if test "$with_pam_req" = yes -a "$have_pam" = no ; then
+ warn 'Use of PAM was requested, but it was not found.'
+fi
+
+if test "$with_shadow_req" = yes -a "$have_shadow" = no ; then
warn 'Use of shadow passwords was requested, but they were not found.'
fi
fi
fi
-if test $warning != no; then
+if test "$warning" != no; then
echo '' ; echo "$warnsep" ; echo ''
fi
s%@fortune@%$fortune%g
s%@INCLUDES@%$INCLUDES%g
s%@SAVER_LIBS@%$SAVER_LIBS%g
+s%@TOOLKIT_LIBS@%$TOOLKIT_LIBS%g
s%@HACK_LIBS@%$HACK_LIBS%g
s%@XPM_LIBS@%$XPM_LIBS%g
s%@GL_LIBS@%$GL_LIBS%g
s%@INSTALL_SETUID@%$INSTALL_SETUID%g
s%@INSTALL_DIRS@%$INSTALL_DIRS%g
s%@NEED_SETUID@%$NEED_SETUID%g
+s%@INSTALL_PAM@%$INSTALL_PAM%g
s%@SGI_VIDEO_OBJS@%$SGI_VIDEO_OBJS%g
s%@SGI_VIDEO_LIBS@%$SGI_VIDEO_LIBS%g
-s%@DIALOG_SRCS@%$DIALOG_SRCS%g
-s%@DIALOG_OBJS@%$DIALOG_OBJS%g
+s%@TOOLKIT_SRCS@%$TOOLKIT_SRCS%g
+s%@TOOLKIT_OBJS@%$TOOLKIT_OBJS%g
s%@PASSWD_SRCS@%$PASSWD_SRCS%g
s%@PASSWD_OBJS@%$PASSWD_OBJS%g
s%@XMU_SRCS@%$XMU_SRCS%g
s%@LOCK_SRCS@%$LOCK_SRCS%g
s%@LOCK_OBJS@%$LOCK_OBJS%g
s%@GL_EXES@%$GL_EXES%g
-s%@GL_KLUDGE_1@%$GL_KLUDGE_1%g
-s%@GL_KLUDGE_2@%$GL_KLUDGE_2%g
+s%@GL_KLUDGE@%$GL_KLUDGE%g
s%@HACKDIR@%$HACKDIR%g
s%@APPDEFAULTS@%$APPDEFAULTS%g
s%@DEPEND@%$DEPEND%g
eval HACKDIR=${HACKDIR}
eval HACKDIR=${HACKDIR}
-echo ""
-echo "$warnsep"
-echo ""
-echo ' When you run "make install", the "xscreensaver" and'
-echo ' "xscreensaver-command" executables will be installed in'
-echo " ${bindir}."
-echo ""
-echo " The various graphics demos (80+ different executables) will"
-echo " be installed in ${HACKDIR}."
-echo ""
-echo " If you would prefer the demos to be installed elsewhere"
-echo " (for example, in a dedicated directory) you should re-run"
-echo " configure with the --enable-subdir=DIR option. For more"
-echo " information, run $0 --help."
-echo ""
-echo "$warnsep"
-echo ""
+# canonicalize slashes.
+bindir=`echo "${bindir}" | sed 's@/$@@;s@//*@/@g'`
+HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
+
+if test "${bindir}" = "${HACKDIR}" ; then
+ echo ""
+ echo "$warnsep"
+ echo ""
+ echo ' When you run "make install", the "xscreensaver",'
+ echo ' "xscreensaver-demo", and "xscreensaver-command" executables'
+ echo " will be installed in ${bindir}."
+ echo ""
+ echo " The various graphics demos (80+ different executables) will"
+ echo " also be installed in ${HACKDIR}."
+ echo ""
+ echo " If you would prefer the demos to be installed elsewhere"
+ echo " (for example, in a dedicated directory) you should re-run"
+ echo " configure with the --enable-subdir=DIR option. For more"
+ echo " information, run $0 --help."
+ echo ""
+ echo "$warnsep"
+ echo ""
+fi