-..de EX \"Begin example
+.de EX \"Begin example
.ne 5
.if n .sp 1
.if t .sp .5
.if n .sp 1
.if t .sp .5
..
-.TH XScreenSaver 1 "31-May-97" "X Version 11"
+.TH XScreenSaver 1 "30-Jun-98 (2.24)" "X Version 11"
.SH NAME
xscreensaver - graphics hack and screen locker, launched when the user is idle
.SH SYNOPSIS
.B xscreensaver
-[\-display \fIhost:display.screen\fP] [\-timeout \fIint\fP] [\-cycle \fIint\fP] [\-nice \fIint\fP] [\-lock] [\-no\-lock] [\-lock\-timeout \fIint\fP] [\-demo] [\-visual \fIvisual\fP] [\-install] [\-no\-install] [\-verbose] [\-silent] [\-xidle\-extension] [\-no\-xidle\-extension] [\-sgi\-extension] [\-no\-sgi\-extension] [\-mit\-extension] [\-no\-mit\-extension] [\-xrm \fIresources\fP]
+[\-display \fIhost:display.screen\fP] \
+[\-timeout \fIint\fP] \
+[\-cycle \fIint\fP] \
+[\-lock\-mode] \
+[\-no\-lock\-mode] \
+[\-lock\-timeout \fIint\fP] \
+[\-visual \fIvisual\fP] \
+[\-install] \
+[\-no\-install] \
+[\-verbose] \
+[\-silent] \
+[\-nice \fIint\fP] \
+[\-mit\-extension] \
+[\-no\-mit\-extension] \
+[\-sgi\-extension] \
+[\-no\-sgi\-extension] \
+[\-xidle\-extension] \
+[\-no\-xidle\-extension] \
+[\-xrm \fIresources\fP]
.SH DESCRIPTION
The \fIxscreensaver\fP program waits until the keyboard and mouse have been
idle for a period, and then runs a graphics demo chosen at random. It
programs is the ease with which new graphics hacks can be installed. You
don't need to recompile (or even re-run) this program to add a new display
mode.
-.SH OPTIONS
-.I xscreensaver
-accepts the following command line options:
+.SH GETTING STARTED
+For the impatient, try this:
+.EX
+xscreensaver &
+xscreensaver-command -demo
+.EE
+After a few seconds, the screen should go black, and a dialog box should
+appear in the upper right corner. This is \fIDemo Mode\fP.
+
+.B Note:
+unlike
+.BR xlock (1),
+xscreensaver has a client-server model: the xscreensaver process is a
+daemon that runs in the background; it is controlled by the foreground
+.BR xscreensaver-command (1)
+program.
+.SH DEMO MODE
+If \fIxscreensaver\fP receives the \fBDEMO\fP ClientMessage, which is done
+by running the
+.BR xscreensaver\-command (1)
+program with the \fB\-demo\fP option, the screensaver will black the screen
+and pop up a dialog box from which you can examine and experiment with the
+client programs.
+
+The dialog box contains a scrolling list, a text field, and a number of
+buttons.
+
+Double-clicking on one of the programs in the list will run it. The dialog
+box will disappear, allowing the program access to the full screen. Clicking
+the mouse again will bring the dialog box back.
+
+Single-clicking in the list will place the indicated program and its args
+in the text field to be edited. Edit the arguments and hit return to run
+the program with the parameters you have specified. (Note that these are
+one-time changes and won't be remembered; to make the changes permanent,
+you need to edit your X resource file.)
+
+The buttons are:
.TP 8
-.B \-timeout \fIminutes\fP
-The screensaver will activate after the keyboard and mouse have been idle
-for this many minutes. Default 10.
+.B Run Next
+Clicking this button will run the next program in the list after the
+currently-selected one, and will scroll around to the top when it reaches
+the bottom.
.TP 8
-.B \-cycle \fIminutes\fP
+.B Run Previous
+Opposite of Run Next; at the top, it scrolls around to the bottom.
+.TP 8
+.B Preferences
+This pops up a second dialog box, in which you have the option to
+interactively change most of the screensaver's operational parameters,
+such as its timeouts, and whether it should lock the screen. Changing
+these parameters here will affect only the running \fIxscreensaver\fP
+process; to make the changes permanent, you need to edit your X resource
+file. (See the \fIConfiguration\fP section, below.)
+.TP 8
+.B Exit Demo Mode
+Returns to normal screensaver operation.
+.TP 8
+.B Reinitialize
+This causes the X resource database to be re-read, to pick up any changes
+you might have made. This works by causing the screensaver process to exit
+and then restart itself with the same command-line arguments. This is just
+like the \fI\-restart\fP argument to
+.BR xscreensaver\-command (1)
+except that when executed from this button, the screensaver will
+automatically return to Demo Mode after restarting.
+.SH CONFIGURATION
+\fIxscreensaver\fP understands the following X resources. The best way
+to specify these parameters is to set them in your X resource file,
+which is usually called \fI~/.Xdefaults\fP. For example, to set the
+default value of the \fItimeout\fP resource, you would add the following
+line to your .Xdefaults file:
+.EX
+xscreensaver.timeout: 5
+.EE
+To make the system notice this change, you might also need to run
+.BR xrdb (1):
+.EX
+xrdb < ~/.Xdefaults
+.EE
+And if xscreensaver was already running, and you would like it to notice
+your changes, you'll also have to tell the running xscreensaver process
+to re-initialize itself, like so:
+.EX
+xscreensaver-command -restart
+.EE
+If you want to set the system-wide defaults, then make your edits to
+the xscreensaver app-defaults file, which should have been installed
+when xscreensaver itself was installed. The app-defaults file will
+usually be named /usr/lib/X11/app-defaults/XScreenSaver, but different
+systems might keep it in a different place (for example,
+/usr/openwin/lib/app-defaults/XScreenSaver on Solaris.)
+.PP
+.TP 8
+.B timeout\fP (class \fBTime\fP)
+The screensaver will activate (blank the screen) after the keyboard and
+mouse have been idle for this many minutes. Default 10 minutes.
+.TP 8
+.B cycle\fP (class \fBTime\fP)
After the screensaver has been running for this many minutes, the currently
-running graphics hack sub-process will be killed (with \fBSIGTERM\fP), and a
-new one started. If this is 0, then the graphics hack will not be changed:
+running graphics-hack sub-process will be killed (with \fBSIGTERM\fP), and a
+new one started. If this is 0, then the graphics hack will never be changed:
only one demo will run until the screensaver is deactivated by user activity.
-Default 10.
+Default 10 minutes.
.TP 8
-.B \-nice \fIinteger\fP
-The sub-processes created by \fIxscreensaver\fP will be ``niced'' to this
-level, so that they are given lower priority than other processes on the
-system, and don't increase the load unnecessarily. The default is 20.
-
-(Higher numbers mean lower priority; see
-.BR nice (1)
-for details.)
-.TP 8
-.B \-lock
-Enable locking: before the screensaver will turn off, it requires you to
-type the password of the person who launched the screensaver, or the root
-password. (Note: this doesn't work if the screensaver is launched
-by
+.B lock\fP (class \fBBoolean\fP)
+Enable locking: before the screensaver will turn off, it will require you
+to type the password of the logged-in user (really, the person who ran
+xscreensaver), or the root password. (\fBNote:\fP this doesn't work if the
+screensaver is launched by
.BR xdm (1)
-because it can't know the user-id of the logged-in user.)
-.TP 8
-.B \-no\-lock
-Disable locking. This is the default.
+because it can't know the user-id of the logged-in user. See
+the ``\fIUsing XDM(1)\fP'' section, below.
.TP 8
-.B \-lock\-timeout \fIminutes\fP
-This is how long after the screensaver activates that locking is enabled.
+.B lockTimeout\fP (class \fBTime\fP)
+If locking is enabled, this controls the length of the ``grace period''
+between when the screensaver activates, and when the screen becomes locked.
For example, if this is 5, and \fI\-timeout\fP is 10, then after 10 minutes,
the screen would blank. If there was user activity at 12 minutes, no password
-would be required. But, if there was user activity at 15 minutes or later
-(\fI\-lock\-timeout\fP minutes after activation) then a password would be
-required. The default is 0, meaning that if locking is enabled, then
-a password will be required as soon as the screensaver activates.
-.TP 8
-.B \-demo
-Enter the interactive demo mode immediately after startup. Normally
-demo mode is invoked via the
-.BR xscreensaver\-command (1)
-program, but this is a shortcut for new users. See below for a description
-of how demo-mode works.
+would be required to un-blank the screen. But, if there was user activity
+at 15 minutes or later (that is, \fI\-lock\-timeout\fP minutes after
+activation) then a password would be required. The default is 0, meaning
+that if locking is enabled, then a password will be required as soon as the
+screen blanks.
.TP 8
-.B \-visual \fIvisual\fP
-Specify which X visual to use by default. Legal values are:
+.B passwdTimeout\fP (class \fBTime\fP)
+If the screen is locked, then this is how many seconds the password dialog box
+should be left on the screen before giving up (default 30 seconds.) This
+should not be too large: the X server is grabbed for the duration that the
+password dialog box is up (for security purposes) and leaving the server
+grabbed for too long can cause problems.
+.TP 8
+.B visualID\fP (class \fBVisualID\fP)
+Specify which X visual to use by default. (Note carefully that this resource
+is called \fBvisualID\fP, not merely \fBvisual\fP; if you set the \fBvisual\fP
+resource instead, things will malfunction in obscure ways for obscure reasons.)
+
+Legal values for the \fBVisualID\fP resource are:
.RS 8
.TP 8
.B default
.B best
Use the visual which supports the most colors. Note, however, that the
visual with the most colors might be a TrueColor visual, which does not
-support colormap animation.
+support colormap animation. Some programs have more interesting behavior
+when run on PseudoColor visuals than on TrueColor.
.TP 8
.B mono
Use a monochrome visual, if there is one.
Use the best of the color visuals, if there are any.
.TP 8
.I class
-where \fIclass\fP is one
-
-of \fBStaticGray\fP, \fBStaticColor\fP, \fBTrueColor\fP, \fBGrayScale\fP, \fBPseudoColor\fP,
-or \fBDirectColor\fP. Selects the deepest visual of
-the given class.
+where \fIclass\fP is one of \fBStaticGray\fP, \fBStaticColor\fP,
+\fBTrueColor\fP, \fBGrayScale\fP, \fBPseudoColor\fP, or \fBDirectColor\fP.
+Selects the deepest visual of the given class.
.TP 8
.I number
where \fInumber\fP (decimal or hex) is interpreted as a visual id number,
program; in this way you can have finer control over exactly which visual
gets used, for example, to select a shallower one than would otherwise
have been chosen.
+
.RE
.RS 8
-.PP
Note that this option specifies only the \fIdefault\fP visual that will
be used: the visual used may be overridden on a program-by-program basis.
See the description of the \fBprograms\fP resource, below.
.RE
.TP 8
-.B \-install
-When using a non-default visual, install a private colormap while the
-screensaver is active, so that the graphics hacks can get as many colors as
-possible. This is the default. (This only applies when the screen's
-default visual is being used, since non-default visuals get their own
-colormaps automatically.)
+.B installColormap\fP (class \fBBoolean\fP)
+Install a private colormap while the screensaver is active, so that the
+graphics hacks can get as many colors as possible. This is the
+default. (This only applies when the screen's default visual is being
+used, since non-default visuals get their own colormaps automatically.)
+This can also be overridden on a per-hack basis: see the discussion of
+the \fBdefault\-n\fP name in the section about the \fBprograms\fP resource.
.TP 8
-.B \-no\-install
-Use the default colormap.
+.B verbose\fP (class \fBBoolean\fP)
+Whether to print diagnostics. Default false.
.TP 8
-.B \-verbose
-Print diagnostics.
-.TP 8
-.B \-silent
+.B nice\fP (class \fBNice\fP)
+The sub-processes created by \fIxscreensaver\fP will be ``niced'' to this
+level, so that they are given lower priority than other processes on the
+system, and don't increase the load unnecessarily. The default is 20.
+(Higher numbers mean lower priority; see
+.BR nice (1)
+for details.)
.TP 8
-.B \-xidle\-extension
-Use the \fBXIDLE\fP server extension to decide whether the user is idle.
-This is the default if \fIxscreensaver\fP has been compiled with support
-for this extension. On X11R4 or X11R5 systems, the XIdle method is faster
-and more reliable than what will be done otherwise, so use it if you can.
-.TP 8
-.B \-no\-xidle\-extension
-Don't use the \fBXIDLE\fP server extension.
-.TP 8
-.B \-sgi\-extension
-Use the SGI \fBSCREEN_SAVER\fP server extension to decide whether the user
-is idle. This is the default if \fIxscreensaver\fP has been compiled with
-support for this extension (which is the default on SGI systems.). If it
-is available, the \fBSCREEN_SAVER\fP method is faster and more reliable than
-what will be done otherwise, so use it if you can.
-.TP 8
-.B \-no\-sgi\-extension
-Don't use the SGI \fBSCREEN_SAVER\fP server extension.
-.TP 8
-.B \-mit\-extension
-Use the \fBMIT\-SCREEN\-SAVER\fP server extension to decide whether the user
-is idle. This is the default if \fIxscreensaver\fP has been compiled with
-support for this extension. However, this extension is flaky, so it's use
-is not really recommended. (It also makes the \fIfade\fP option not work
-properly.)
-.TP 8
-.B \-no\-mit\-extension
-Don't use the \fBMIT\-SCREEN\-SAVER\fP server extension.
-.SH X RESOURCES
-\fIxscreensaver\fP understands the following resources:
-.PP
-.TP 8
-.B timeout \fR(class \fBTime\fP)
-Same as the \fI\-timeout\fP command-line option. Default 10 minutes.
-.TP 8
-.B cycle \fR(class \fBTime\fP)
-Same as the \fI\-cycle\fP command-line option. Default 10 minutes.
-.TP 8
-.B nice \fR(class \fBNice\fP)
-Same as the \fI\-nice\fP command-line option. Default 10.
-.TP 8
-.B lock \fR(class \fBBoolean\fP)
-Same as the \fI\-lock\fP command-line option.
-.TP 8
-.B lockTimeout \fR(class \fBTime\fP)
-Same as the \fI\-lock\-timeout\fP command-line option.
-.TP 8
-.B passwdTimeout \fR(class \fBTime\fP)
-If the screen is locked, then this is how many seconds the password dialog box
-should be left on the screen before giving up (default 30.) This should not
-be too large: the X server is grabbed for the duration that the password
-dialog box is up (for security purposes) and leaving the server grabbed for
-too long can cause problems.
-.TP 8
-.B verbose \fR(class \fBBoolean\fP)
-Same as the \fI\-verbose\fP command-line option.
-.TP 8
-.B xidle \fR(class \fBBoolean\fP)
-Same as the \fI\-xidle\fP command-line option.
-.TP 8
-.B fade \fR(class \fBBoolean\fP)
+.B sgiSaverExtension\fP (class \fBBoolean\fP)
+There are a number of different X server extensions which can make
+xscreensaver's job easier. The next few resources specify whether these
+extensions should be utilized if they are available.
+
+This resource controls whether the SGI \fBSCREEN_SAVER\fP server extension
+will be used to decide whether the user is idle. This is the default
+if \fIxscreensaver\fP has been compiled with support for this
+extension (which is the default on SGI systems.). If it is available,
+the \fBSCREEN_SAVER\fP method is faster and more reliable than what will
+be done otherwise, so use it if you can. (This extension is only available
+on Silicon Graphics systems, unfortunately.)
+.TP 8
+.B mitSaverExtension\fP (class \fBBoolean\fP)
+This resource controls whether the \fBMIT\-SCREEN\-SAVER\fP server extension
+will be used to decide whether the user is idle. However, the default for
+this resource is \fIfalse\fP, because even if this extension is available,
+it is flaky (and it also makes the \fBfade\fP option not work properly.)
+Use of this extension is not recommended.
+.TP 8
+.B xidleExtension\fP (class \fBBoolean\fP)
+This resource controls whether the \fBXIDLE\fP server extension will be
+used to decide whether the user is idle. This is the default
+if \fIxscreensaver\fP has been compiled with support for this extension.
+(This extension is only available for X11R4 and X11R5 systems, unfortunately.)
+.TP 8
+.B fade\fP (class \fBBoolean\fP)
If this is true, then when the screensaver activates, the current contents
of the screen will fade to black instead of simply winking out. This only
works on displays with writable colormaps, that is, if the screen's default
-visual is a PseudoColor visual. Default true. A fade will also be done when
+visual is a PseudoColor visual. A fade will also be done when
switching graphics hacks (when the \fIcycle\fP timer expires.)
+Default: true.
.TP 8
-.B unfade \fR(class \fBBoolean\fP)
+.B unfade\fP (class \fBBoolean\fP)
If this is true, then when the screensaver deactivates, the original contents
of the screen will fade in from black instead of appearing immediately. This
only works on displays with writable colormaps, and if \fIfade\fP is true
as well. Default false.
.TP 8
-.B fadeSeconds \fR(class \fBTime\fP)
+.B fadeSeconds\fP (class \fBTime\fP)
If \fIfade\fP is true, this is how long the fade will be in
-seconds (default 3.)
+seconds (default 3 seconds.)
.TP 8
-.B fadeTicks \fR(class \fBInteger\fP)
+.B fadeTicks\fP (class \fBInteger\fP)
If \fIfade\fP is true, this is how many times a second the colormap will
be changed to effect a fade. Higher numbers yield smoother fades, but
may make the fades take longer than the specified \fIfadeSeconds\fP if
your server isn't fast enough to keep up. Default 20.
.TP 8
-.B visualID \fR(class \fBVisualID\fP)
-Same as the \fI\-visual\fP command-line option. Default \fBdefault\fP.
-.TP 8
-.B installColormap \fR(class \fBBoolean\fP)
-Same as the \fI\-install\fP command-line option. Default true.
-.TP 8
-.B captureStderr \fR(class \fBBoolean\fP)
+.B captureStderr\fP (class \fBBoolean\fP)
Whether \fIxscreensaver\fP should redirect its standard-error stream to the
window itself. Since its nature is to take over the screen, you would not
-normally see error messages generated by the screensaver or the programs it
+normally see error messages generated by xscreensaver or the sub-programs it
runs; this resource will cause the output of all relevant programs to be
-drawn on the screensaver window itself instead of written to the controlling
-terminal of the screensaver driver process. Default true.
+drawn on the screensaver window itself, as well as being written to the
+controlling terminal of the screensaver driver process. Default true.
.TP 8
-.B captureStdout \fR(class \fBBoolean\fP)
+.B captureStdout\fP (class \fBBoolean\fP)
Like \fBcaptureStderr\fP but for the standard-output stream. Default true.
.TP 8
-.B font \fR(class \fBFont\fP)
+.B font\fP (class \fBFont\fP)
The font used for the stdout/stderr text, if \fBcaptureStdout\fP or
\fBcaptureStderr\fP are true. Default \fB*\-medium\-r\-*\-140\-*\-m\-*\fP
(a 14 point fixed-width font.)
.TP 8
-.B textForeground \fR(class \fBForeground\fP)
+.B overlayTextForeground\fP (class \fBForeground\fP)
The foreground color used for the stdout/stderr text, if \fBcaptureStdout\fP
or \fBcaptureStderr\fP are true. Default: Yellow.
.TP 8
-.B textBackground \fR(class \fBBackground\fP)
+.B overlayTextBackground\fP (class \fBBackground\fP)
The background color used for the stdout/stderr text, if \fBcaptureStdout\fP
or \fBcaptureStderr\fP are true. Default: Black.
.TP 8
-.B programs \fR(class \fBPrograms\fP)
+.B programs\fP (class \fBPrograms\fP)
The graphics hacks which \fIxscreensaver\fP runs when the user is idle.
The value of this resource is a string, one \fIsh\fP-syntax command per line.
-Each line must contain exactly one command -- no semicolons, no ampersands.
+Each line must contain exactly one command: no semicolons, no ampersands.
When the screensaver starts up, one of these is selected at random, and
run. After the \fIcycle\fP period expires, it is killed, and another
If the value of this resource is empty, then no programs will be run; the
screen will simply be made black.
-If the display has multiple screens, then a different program will be run
-for each screen.
+If the display has multiple screens, then a different program will be run
+for each screen. (All screens are blanked and unblanked simultaniously.)
Note that you must escape the newlines; here is an example of how you
-might set this in your \fI.Xdefaults\fP file:
+might set this in your \fI~/.Xdefaults\fP file:
+.RS 8
.EX
xscreensaver.programs: \\
qix -root \\n\\
xdaliclock -builtin2 -root \\n\\
xv -root -rmode 5 image.gif -quit \\n
.EE
+.RE
.RS 8
+Make sure your \fB$PATH\fP environment variable is set up correctly
+\fIbefore\fP xscreensaver is launched, or it won't be able to find the
+programs listed in the \fIprograms\fP resource.
+
To use a program as a screensaver, two things are required: that that
program draw on the root window (or be able to be configured to draw on
the root window); and that that program understand ``virtual root''
display, you can specify that like this:
.EX
- mono: mono-program -root \\n\\
- color: color-program -root \\n\\
+ mono: mono-program -root \\n\\
+ color: color-program -root \\n\\
.EE
.RE
.RS 8
More generally, you can specify the kind of visual that should be used for
the window on which the program will be drawing. For example, if one
program works best if it has a colormap, but another works best if it has
-a 24-bit visual, both can be accomidated:
+a 24-bit visual, both can be accommodated:
.EX
- PseudoColor: cmap-program -root \\n\\
- TrueColor: 24bit-program -root \\n\\
+ PseudoColor: cmap-program -root \\n\\
+ TrueColor: 24bit-program -root \\n\\
.EE
.RE
.RS 8
and \fImonoPrograms\fP resources, but those resources have now been removed;
a warning will be issued if they are used.)
+In addition to the symbolic visual names described above (in the discussion
+of the \fIvisualID\fP resource) one other visual name is supported in
+the \fIprograms\fP list:
+.RS 1
+.TP 4
+.B default-n
+This is like \fBdefault\fP, but also requests the use of the default colormap,
+instead of a private colormap. (That is, it behaves as if
+the \fI\-no\-install\fP command-line option was specified, but only for
+this particular hack.) This is provided because some third-party programs
+that draw on the root window (notably:
+.BR xv (1),
+and
+.BR xearth (1))
+make assumptions about the visual and colormap of the root window:
+assumptions which xscreensaver can violate.
+
+.RE
If you specify a particular visual for a program, and that visual does not
exist on the screen, then that program will not be chosen to run. This
means that on displays with multiple screens of different depths, you can
.PP
.PP
Normally you won't need to change the following resources:
+.PP
.TP 8
-.B bourneShell \fR(class \fBBourneShell\fP)
+.B bourneShell\fP (class \fBBourneShell\fP)
The pathname of the shell that \fIxscreensaver\fP uses to start subprocesses.
-This must be whatever your local variant of \fB/bin/sh\fP is -- in particular,
+This must be whatever your local variant of \fB/bin/sh\fP is: in particular,
it must not be \fBcsh\fP.
.TP 8
-.B windowCreationTimeout \fR(class \fBTime\fP)
+.B windowCreationTimeout\fP (class \fBTime\fP)
When server extensions are not in use, this controls the delay between when
windows are created and when \fIxscreensaver\fP selects events on them.
Default 30 seconds.
.TP 8
-.B pointerPollTime \fR(class \fBTime\fP)
+.B pointerPollTime\fP (class \fBTime\fP)
When server extensions are not in use, this controls how
frequently \fIxscreensaver\fP checks to see if the mouse position or buttons
have changed. Default 5 seconds.
.TP 8
-.B initialDelay \fR(class \fBTime\fP)
+.B initialDelay\fP (class \fBTime\fP)
When server extensions are not in use, \fIxscreensaver\fP will wait this many
seconds before selecting events on existing windows, under the assumption that
\fIxscreensaver\fP is started during your login procedure, and the window
-state may be in flux. Default 30 seconds.
+state may be in flux. Default 0. (This used to default to 30, but that was
+back in the days when slow machines and X terminals were more common...)
.TP 8
-.B overlayStderr \fR(class \fBBoolean\fP)
+.B overlayStderr\fP (class \fBBoolean\fP)
If \fBcaptureStderr\fP or \fBcaptureStdout\fP are True, and your server
supports ``overlay'' visuals, then the text will be written into one of
the higher layers instead of into the same layer as the running screenhack.
Set this to False to disable that (though you shouldn't need to.)
-.SH "HOW IT WORKS"
+.SH COMMAND-LINE OPTIONS
+.I xscreensaver
+also accepts the following command line options. Except for
+the \fI\-display\fP option, these command-line options are all
+simply shorthand for the X resources described in
+the \fIConfiguration\fP section, above.
+.TP 8
+.B \-display \fIhost:display.screen\fP
+The X display to use. For displays with multiple screens, XScreenSaver
+will manage all screens on the display simultaniously; the \fIscreen\fP
+argument (the ``default'' screen) says which screen should be used for
+dialog boxes (the password window, \fIDemo Mode\fP, etc.)
+.TP 8
+.B \-timeout \fIminutes\fP
+Same as the \fItimeout\fP resource.
+.TP 8
+.B \-cycle \fIminutes\fP
+Same as the \fIcycle\fP resource.
+.TP 8
+.B \-lock\-mode
+Same as setting the \fIlock\fP resource to \fItrue\fP.
+.TP 8
+.B \-no\-lock\-mode
+Same as setting the \fIlock\fP resource to \fIfalse\fP.
+.TP 8
+.B \-lock\-timeout \fIminutes\fP
+Same as the \fIlockTimeout\fP resource.
+.TP 8
+.B \-visual \fIvisual\fP
+Same as the \fIvisualID\fP resource.
+.TP 8
+.B \-install
+Same as setting the \fIinstallColormap\fP resource to \fItrue\fP.
+.TP 8
+.B \-no\-install
+Same as setting the \fIinstallColormap\fP resource to \fIfalse\fP.
+.TP 8
+.B \-verbose
+Same as setting the \fIverbose\fP resource to \fItrue\fP.
+.TP 8
+.B \-silent
+Same as setting the \fIverbose\fP resource to \fIfalse\fP.
+.TP 8
+.B \-nice \fIinteger\fP
+Same as the \fInice\fP resource.
+.TP 8
+.B \-sgi\-extension
+Same as setting the \fIsgiSaverExtension\fP resource to \fItrue\fP.
+.TP 8
+.B \-no\-sgi\-extension
+Same as setting the \fIsgiSaverExtension\fP resource to \fIfalse\fP.
+.TP 8
+.B \-mit\-extension
+Same as setting the \fImitSaverExtension\fP resource to \fItrue\fP.
+.TP 8
+.B \-no\-mit\-extension
+Same as setting the \fImitSaverExtension\fP resource to \fIfalse\fP.
+.TP 8
+.B \-xidle\-extension
+Same as setting the \fIxidleExtension\fP resource to \fItrue\fP.
+.TP 8
+.B \-no\-xidle\-extension
+Same as setting the \fIxidleExtension\fP resource to \fIfalse\fP.
+.TP 8
+.B \-xrm \fIresource-specification\fP
+As with all other Xt programs, you can specify X resources on the command-line
+using the \fI\-xrm\fP argument. Most of the interesting resources have
+command-line equivalents, however.
+.SH HOW IT WORKS
When it is time to activate the screensaver, a full-screen black window is
created on each screen of the display. The window or windows is given the
appropriate properties so that, to any subsequently-created programs, it
You can control a running screensaver process by using the
.BR xscreensaver\-command (1)
program (which see.)
+.SH POWER MANAGEMENT
+Modern X servers contain support to power down the monitor after an idle
+period. If the monitor has powered down, then \fIxscreensaver\fP will
+notice this, and will not waste CPU by drawing graphics demos on a black
+screen. An attempt will also be made to explicitly power the monitor
+back up as soon as user activity is detected.
+
+If your X server supports power management, then
+.BR xset (1)
+will accept a \fBdpms\fP option. So, if you wanted \fIxscreensaver\fP
+to activate after 5 minutes, but you wanted your monitor to power down
+after one hour (3600 seconds) you would do this:
+.EX
+xset dpms 3600
+.EE
+See the man page for the
+.BR xset (1)
+program for details. (Note that power management requires both software
+support in the X server, and hardware support in the monitor itself.)
.SH USING XDM(1)
You can run \fIxscreensaver\fP from your xdm session, so that the
screensaver will run even when nobody is logged in on the console.
file. Because \fIxdm\fP grabs the keyboard, keypresses will not make
the screensaver deactivate, but any mouse activity will.
+Make sure you have \fB$PATH\fP set up correctly in the Xsetup script, or
+\fIxdm\fP won't be able to find \fIxscreensaver\fP, and/or \fIxscreensaver\fP
+won't be able to find its graphics hacks.
+
(If your system does not seem to be executing the \fIXsetup\fP file, you
-may need to configure it to do so -- the traditional way to do this is
+may need to configure it to do so: the traditional way to do this is
to make that file the value of the \fIDisplayManager*setup\fP resource
-in the \fIxdm-config\fP file. See the man page for
+in the \fI/usr/lib/X11/xdm/xdm-config\fP file. See the man page for
.BR xdm (1)
for more details.)
Users may want to add \fB"xscreensaver-command -restart"\fP to their
startup scripts, so that the screensaver will be reinitialized with
-their private resource settings when they log in.
+their private resource settings when they log in. Users who don't do
+this will get the system-wide defaults instead.
It is safe to run this program as root (as \fIxdm\fP is likely to do.) If
run as root, \fIxscreensaver\fP changes its effective user and group ids to
Locking doesn't work if the screensaver is launched by \fIxdm\fP. To get
around this, you can run the screensaver from \fIxdm\fP without locking,
and kill and restart it from your personal X startup script to enable
-locking; for example:
+locking; for example, by using this pair of commands:
.EX
- xscreensaver-command -exit ; xscreensaver
+xscreensaver-command -exit
+xscreensaver
.EE
-.SH DEMO MODE
-If \fIxscreensaver\fP receives the \fBDEMO\fP ClientMessage, which is done
-by running the \fBxscreensaver\-command\fP program with the \fB\-demo\fP
-option, the screensaver will black the screen and pop up a dialog box from
-which you can examine and experiment with the client programs.
+If you get "connection refused" errors when running \fIxscreensaver\fP
+from \fIxdm\fP, then this probably means that you have
+.BR xauth (1)
+or some other security mechanism turned on. One way around this is to
+add \fB"xhost\ +localhost"\fP to \fIXsetup\fP, just before \fIxscreensaver\fP
+is launched.
-The dialog box contains a scrolling list, a text field, and a number of
-buttons.
+Note that this will give access to the X server to anyone capable of logging
+in to the local machine, so in some environments, this might not be
+appropriate. If turning off file-system-based access control is not
+acceptable, then running \fIxscreensaver\fP from \fIxdm\fP might not be
+possible, and users will have to launch it themselves instead of having it
+be launched by \fIxdm\fP before anyone logs in.
-Double-clicking on one of the programs in the list will run it. Clicking
-the mouse again will bring the dialog box back.
+For more information on the X server's access control mechanisms, see the
+man pages for
+.BR X (1),
+.BR Xsecurity (1),
+.BR xauth (1),
+and
+.BR xhost (1).
+.SH USING CDE (COMMON DESKTOP ENVIRONMENT)
+The easiest way to use \fIxscreensaver\fP on a system with CDE is to simply
+switch off the built-in CDE screensaver, and use \fIxscreensaver\fP instead;
+and second, to tell the front panel to run
+.BR xscreensaver\-command (1)
+with the \fI\-lock\fP option when the \fILock\fP icon is clicked.
-Single-clicking in the list will place the indicated program and its args
-in the text field to be edited. Edit the arguments and hit return to run
-the program with the parameters you have specified. (Note that these are
-one-time changes and won't be remembered; to make the changes permanent,
-you need to edit your X resource file.)
+To accomplish this involves five steps:
+.RS 4
+.TP 3
+\fB1: Switch off CDE's locker\fP
+Do this by turning off ``\fIScreen Saver and Screen Lock\fP'' in the
+Screen section of the Style Manager.
+.TP 3
+\fB2: Edit sessionetc\fP
+Edit the file \fI~/.dt/sessions/sessionetc\fP and add to it the line
-The buttons are:
-.TP 8
-.B Run Next
-Clicking this button will run the next program in the list after the
-currently-selected one, and will scroll around to the top when it reaches
-the bottom.
-.TP 8
-.B Run Previous
-Opposite of Run Next; at the top, it scrolls around to the bottom.
-.TP 8
-.B Edit Parameters
-This pops up a second dialog box, in which you have the option to
-interactively change most of the screensaver's operational parameters,
-such as its timeouts, and whether it should lock the screen. Changing
-these parameters here will affect only the running \fIxscreensaver\fP
-process; to make the changes permanent, you need to edit your X resource
-file.
-.TP 8
-.B Exit Demo Mode
-Returns to normal screensaver operation.
-.TP 8
-.B Reinitialize
-This causes the X resource database to be re-read, to pick up any changes
-you might have made. This works by causing the screensaver process to exit
-and then restart itself with the same command-line arguments. This is just
-like the \fI\-restart\fP argument to
-.BR xscreensaver\-command (1)
-except that when executed from this button, the screensaver will
-automatically return to demo mode after restarting.
+.EX
+xscreensaver &
+.EE
+This will cause \fIxscreensaver\fP to be launched when you log in.
+(As always, make sure that xscreensaver and the graphics demos are on
+your \fB$PATH\fP; the path needs to be set in \fI.cshrc\fP
+and/or \fI.dtprofile\fP, not \fI.login\fP.)
+.TP 3
+\fB3: Create XScreenSaver.dt\fP
+Create a file called \fI~/.dt/types/XScreenSaver.dt\fP with the following
+contents:
+
+.EX
+ACTION XScreenSaver
+{
+ LABEL XScreenSaver
+ TYPE COMMAND
+ EXEC_STRING xscreensaver-command -lock
+ ICON Dtkey
+ WINDOW_TYPE NO_STDIO
+}
+.EE
+This defines a ``lock'' command for the CDE front panel, that knows how
+to talk to \fIxscreensaver\fP.
+.TP 3
+\fB4: Create Lock.fp\fP
+Create a file called \fI~/.dt/types/Lock.fp\fP with the following
+contents:
+
+.EX
+CONTROL Lock
+{
+ TYPE icon
+ CONTAINER_NAME Switch
+ CONTAINER_TYPE SWITCH
+ POSITION_HINTS 1
+ ICON Fplock
+ LABEL Lock
+ PUSH_ACTION XScreenSaver
+ HELP_TOPIC FPOnItemLock
+ HELP_VOLUME FPanel
+}
+.EE
+This associates the CDE front panel ``Lock'' icon with the lock command
+we just defined in step 3.
+.TP 3
+\fB5: Restart\fP
+Select ``\fIRestart Workspace Manager\fP'' from the popup menu to make
+your changes take effect. If things seem not to be working, check the
+file \fI~/.dt/errorlog\fP for error messages.
+.RE
+.SH USING HP VUE (VISUAL USER ENVIRONMENT)
+Since CDE is a descendant of VUE, the instructions for using xscreensaver
+under VUE are similar to the above:
+
+.RS 4
+.TP 3
+\fB1: Switch off VUE's locker\fP
+Open the ``\fIStyle Manager\fP'' and select ``\fIScreen\fP.''
+Turn off ``\fIScreen Saver and Screen Lock\fP'' option.
+.TP 3
+\fB2: Make sure you have a Session\fP
+Next, go to the Style Manager's, ``\fIStartup\fP'' page.
+Click on ``\fISet Home Session\fP'' to create a session, then
+on ``\fIReturn to Home Session\fP'' to select this session each
+time you log in.
+.TP 3
+\fB3: Edit vue.session\fP
+Edit the file \fI~/.vue/sessions/home/vue.session\fP and add to it
+the line
+.EX
+vuesmcmd -screen 0 -cmd "xscreensaver"
+.EE
+This will cause \fIxscreensaver\fP to be launched when you log in.
+(As always, make sure that xscreensaver and the graphics demos are on
+your \fB$PATH\fP; the path needs to be set in \fI.cshrc\fP
+and/or \fI.profile\fP, not \fI.login\fP.)
+.TP 3
+\fB3: Edit vuewmrc\fP
+Edit the file \fI~/.vue/vuewmrc\fP and add (or change) the Lock control:
+.EX
+CONTROL Lock
+{
+ TYPE button
+ IMAGE lock
+ PUSH_ACTION f.exec "xscreensaver-command -lock"
+ HELP_TOPIC FPLock
+}
+.EE
+This associates the VUE front panel ``Lock'' icon with the xscreensaver
+lock command.
+.RE
+.PP
+.SH ADDING TO MENUS
+The
+.BR xscreensaver-command (1)
+program is a perfect candidate for something to add to your window manager's
+popup menus. If you use
+.BR mwm (1),
+.BR 4Dwm (1),
+.BR twm (1),
+or (probably) any of \fItwm\fP's many descendants, you can do it like this:
+.RS 0
+.TP 3
+\fB1. Create ~/.mwmrc (or ~/.twmrc or ...)\fP
+If you don't have a \fI~/.mwmrc\fP file (or, on SGIs, a \fI~/.4Dwmrc\fP file;
+or, with twm, a \fI~/.twmrc\fP file) then create one by making a copy of
+the \fI/usr/lib/X11/system.mwmrc\fP
+file (or \fI/usr/lib/X11/twm/system.twmrc\fP, and so on.)
+.TP 3
+\fB2. Add a menu definition.\fP
+Something like this:
+.EX
+menu XScreenSaver
+{
+ "Blank Screen Now" !"sleep 3; xscreensaver-command -activate"
+ "Lock Screen Now" !"sleep 3; xscreensaver-command -lock"
+ "Screen Saver Demo" !"xscreensaver-command -demo"
+ "Reinitialize Screen Saver" !"xscreensaver-command -restart"
+ "Kill Screen Saver" !"xscreensaver-command -exit"
+ "Launch Screen Saver" !"xscreensaver &"
+}
+.EE
+.TP 3
+\fB3. Add the menu\fP
+For
+.BR mwm (1)
+and
+.BR 4Dwm (1),
+find the section of the file that says \fIMenu DefaultRootMenu\fP.
+For
+.BR twm (1),
+it will probably be \fImenu "defops"\fP. If you add a line somewhere
+in that menu definition that reads
+.EX
+ "XScreenSaver" f.menu XScreenSaver
+.EE
+then this will add an XScreenSaver sub-menu to your default root-window
+popup menu. Alternately, you could just put the \fIxscreensaver-command\fP
+menu items directly into the root menu.
+.RE
+
+Other window managers might (and probably do) do things differently.
.SH BUGS
(This is not a bug, but) note that as of release 1.32, the \fBcolorPrograms\fP
and \fBmonoPrograms\fP resources are no longer used: they have been
-supplanted by the extended syntax of the \fBprograms\fP resource (see above.)
+supplanted by the extended syntax of the \fBprograms\fP resource (which is
+described in the \fIConfiguration\fP section, above.)
.TP 8
-Extensions
+.B Extensions
If you are not making use of one of the server extensions (\fBXIDLE\fP,
-\fBSCREEN_SAVER\fP, or \fBMIT-SCREEN-SAVER\fP), then it is possible, in rare
-situations, for \fIxscreensaver\fP to interfere with event propagation and make
-another X program malfunction. For this to occur, that other application
-would need to \fInot\fP select \fBKeyPress\fP events on its non-leaf windows
-within the first 30 seconds of their existence, but then select for them later.
-In this case, that client \fImight\fP fail to receive those events.
-This isn't very likely, since programs generally select a constant set
-of events immediately after creating their windows and then don't change
-them, but this is the reason that it's a good idea to install and use one
-of the server extensions instead, to work around this shortcoming in the
-X protocol.
-.TP 8
-Machine Load
+\fBSGI SCREEN_SAVER\fP, or \fBMIT-SCREEN-SAVER\fP), then it is possible, in
+rare situations, for \fIxscreensaver\fP to interfere with event propagation
+and make another X program malfunction. For this to occur, that other
+application would need to \fInot\fP select \fBKeyPress\fP events on its
+non-leaf windows within the first 30 seconds of their existence, but then
+select for them later. In this case, that client \fImight\fP fail to receive
+those events. This isn't very likely, since programs generally select a
+constant set of events immediately after creating their windows and then
+don't change them, but this is the reason that it's a good idea to install
+and use one of the server extensions instead, to work around this shortcoming
+in the X protocol.
+.TP 8
+.B Machine Load
Although this program ``nices'' the subprocesses that it starts,
graphics-intensive subprograms can still overload the machine by causing
the X server process itself (which is not ``niced'') to suck a lot of
or
.BR xload (1).
.TP 8
-Latency and Responsiveness
+.B Latency and Responsiveness
If the subprocess is drawing too quickly and the connection to the X
server is a slow one (such as an X terminal running over a phone line) then
the screensaver might not turn off right away when the user becomes active
in code intended for use as a screensaver. This prevents too much graphics
activity from being buffered up.
.TP 8
-Locking and XDM
-Locking doesn't work if the screensaver is launched by \fIxdm\fP.
-The reason for this is that when it is launched by \fIxdm\fP, the
-screensaver process is owned by some standard user id (such as \fIroot\fP
-or \fIdaemon\fP) instead of the user who is logged in on the console:
-because the screensaver was started \fIbefore\fP anyone was logged in.
-In order for the screensaver to prompt for the password of the person
-who had logged in from \fIxdm\fP, it would need to know who that user was,
-and there is no reliable and safe way to figure that out. (And even if
-there was, there would be some other security issues here as well.)
+.B Locking and XDM
+If xscreensaver has been launched from
+.BR xdm (1),
+you will need to cause the xscreensaver daemon to exit and restart in
+order to lock the screen.
+
+The reason for this is, if xscreensaver has been launched by
+.BR xdm (1),
+that means it was launched \fIbefore\fP you logged in: so it has no way of
+knowing who the logged-in user is, and therefore, whose password it should
+prompt for.
So if you want to use it as a locker, you must start it with your user id.
-If it has already been started by \fIxdm\fP, you can kill it with
-\fBxscreensaver-command -exit\fP, and then start it again as you.
+If it has already been started by \fIxdm\fP, you can kill it by sending
+it the \fBexit\fP command, and then re-launching it as you, by putting
+something like the following in your personal X startup script:
+.EX
+xscreensaver-command -exit
+xscreensaver &
+.EE
+See the ``\fIUsing XDM(1)\fP'' section, above, for more details.
.TP 8
-Passwords
+.B Locking and root logins
+An implication of the above is that if you log in as \fIroot\fP on the
+console, xscreensaver will refuse to lock the screen (because it can't tell
+the difference between \fIroot\fP being logged in on the console, and a
+normal user being logged in on the console but xscreensaver having been run
+by
+.BR xdm (1)).
+
+The solution to this is simple: you shouldn't be logging in on the console
+as \fIroot\fP in the first place! (What, are you crazy or something?) You
+should log in as you, and
+.BR su (1)
+to \fIroot\fP as necessary. People who spend their day logged in
+as \fIroot\fP are just begging for disaster.
+.TP 8
+.B XAUTH and XDM
+For xscreensaver to work when launched by
+.BR xdm (1),
+programs running on the local machine as user \fI"nobody"\fP must be
+able to connect to the X server. This means that \fB"xhost +localhost"\fP
+is required if xscreensaver is to be launched by
+.BR xdm (1).
+This is \fInot\fP required if \fIxscreensaver\fP is launched by the
+individual users: it is only necessary when it is launched by
+.BR xdm (1),
+before any user has logged in. See the ``\fIUsing XDM(1)\fP'' section,
+above, for more details.
+
+If anyone has suggestions on how xscreensaver could be made to work with
+.BR xdm (1)
+without first turning off \fI.Xauthority\fP-based access control, please
+let me know.
+.TP 8
+.B Passwords
If you get an error message like ``couldn't get password of \fIuser\fP''
then this probably means that you're on a system in which the
.BR getpwent (3)
It also may mean that your system uses shadow passwords instead of the
standard \fIgetpwent\fP interface; in that case, you may need to change
-some options in \fIconfig.h\fP and recompile.
+some options with \fIconfigure\fP and recompile.
If you change your password after xscreensaver has been launched, it will
continue using your old password to unlock the screen until xscreensaver
-is restarted. This turns out to be kind of hard to fix. (But remember,
-kids! Unix security doesn't do much more than keep honest people honest...)
+is restarted. So, after you change your password, you'll have to do
+.EX
+xscreensaver-command -restart
+.EE
+to make \fIxscreensaver\fP notice.
.TP 8
-TWM and Colormaps
+.B Colormap lossage: TWM
The \fBinstallColormap\fP option doesn't work very well with the
.BR twm (1)
window manager and its descendants.
and
.BR olwm (1)
window managers don't seem to have this problem. The race condition exists
-because X apparently does not provide a way for an OverrideRedirect window to
-have its own colormap, short of grabbing the server (which is neither a good
-idea, nor really possible with the current design.) What happens is that, as
-soon as the screensaver installs its colormap, \fBtwm\fP responds to
+because X does not provide a way for an OverrideRedirect window to have its
+own colormap, short of grabbing the server (which is neither a good idea, nor
+really possible with the current design.) What happens is that, as soon as
+the screensaver installs its colormap, \fBtwm\fP responds to
the \fBColormapNotify\fP event that is generated by re-instaling the default
colormap. Apparently, \fBtwm\fP doesn't \fIalways\fP do this; it seems to do
it regularly if the screensaver is activated from a menu item, but seems to
not do it if the screensaver comes on of its own volition, or is activated
from another console. Any thoughts on this problem are welcome...
.TP 8
-XView Clients
+.B Colormap lossage: XV, XAnim, XEarth
+Some programs don't operate properly on visuals other than the default one,
+or with colormaps other than the default one. See the discussion of the
+magic "default-n" visual name in the description of the \fBprograms\fP
+resource in the \fIConfiguration\fP section. When programs only work with
+the default colormap, you need to use a syntax like this:
+.EX
+ default-n: xv -root image-1.gif -quit \\n\\
+ default-n: xearth -nostars -wait 0 \\n\\
+.EE
+It would also work to turn off the \fBinstallColormap\fP option altogether,
+but that would deny extra colors to those programs that \fIcan\fP take
+advantage of them.
+.TP 8
+.B XView Clients
Apparently there are some problems with XView programs getting confused
and thinking that the screensaver window is the real root window even when
the screensaver is not active: ClientMessages intended for the window manager
are sent to the screensaver window instead. This could be solved by making
xscreensaver forward all unrecognised ClientMessages to the real root window,
but there may be other problems as well. If anyone has any insight on the
-cause of this problem, please let me know.
+cause of this problem, please let me know. (XView is an X11 toolkit that
+implements the (quite abominable) Sun OpenLook look-and-feel.)
.TP 8
-MIT Extension and Fading
+.B MIT Extension and Fading
When using the \fBMIT-SCREEN-SAVER\fP extension in conjunction with
the \fBfade\fP option, you may notice an unattractive flicker just before
the fade begins. This is because the server maps a black window just before
process immediately unmaps that window, but this results in a flicker. I
haven't figured a way to get around this; it seems to be a fundamental
property of the (mis-) design of this server extension.
+
+It sure would be nice if someone would implement the \fBSGI SCREEN_SAVER\fP
+extension in XFree86; it's dead simple, and works far better than the
+overengineered and broken \fBMIT-SCREEN-SAVER\fP extension.
+.TP 8
+.B Lesstif (Motif clone)
+\fIDemo Mode\fP is buggy if XScreenSaver was compiled against really old
+versions Lesstif; if you use Lesstif, make sure you use version 0.82 or newer.
+.TP 8
+.B Athena Widgets
+If you compiled against the Athena widget toolkit, the dialog boxes are
+pretty ugly, especially the password dialog. Use Motif! If you don't
+have OSF Motif, use GNU Lesstif, it's free: http://www.lesstif.org/
+.TP 8
+.B SGI Power Saver
+If you're running Irix 6.3, you might find that your monitor is powering down
+after an hour or two even if you've told it not to. This is fixed by SGI
+patches 2447 and 2537.
+.TP 8
+.B OpenGL Programs and Visuals
+Some of the graphics demos included with xscreensaver make use of the
+OpenGL (or MesaGL) 3D library, if it is available. It is possible (even
+likely) that \fIxscreensaver\fP's notion of the ``\fIbest\fP'' visual is
+not quite right for these GL programs.
+
+The odd thing about GL programs is that, unlike normal X11 programs, they
+tend to work best on a visual \fIhalf\fP as deep as the depth of the screen,
+since that way, they can do double-buffering. Try it and see, but you will
+probably find that, for these particular programs, you should specify the
+deepest visual that is half as deep as the screen. (See the discussion
+of the \fBprograms\fP resource in the \fIConfiguration\fP section, above.)
+
+For example, on a screen that supports both 24-bit TrueColor and 12-bit
+PseudoColor visuals, the 12-bit visual will probably work best (this is true
+of base-model SGI Indys: the 0x29 visual is the one you want.) Oddly, on
+SGI O2s (machines that have serious hardware support for GL), the 12-bit
+PseudoColor visual looks awful (you get a black and white, flickery image.)
+On these machines, the visual you want turns out to be 0x31. However, 0x31
+is but \fIone\fP of the \fIeight\fP 15-bit TrueColor visuals (yes, 8, and
+yes, 15) that the O2 X server provides. This is the only visual that works
+properly: as far as
+.BR xdpyinfo (1)
+is concerned, all of the 15-bit TrueColor visuals are identical, but some
+flicker like mad, and some have deeply weird artifacts (such as hidden
+surfaces that show through, as if depth worked backwards!)
+
+I suppose these other visuals must be tied to some arcane hardware feature...
+If anyone would care to explain it to me, that would be great.
+
+Your mileage, therefore, may vary dramatically.
.TP 8
-LessTif (Motif Clone)
-Rumor has it that demo mode is buggy if XScreenSaver was compiled with the
-GNU LessTif reimplementation of Motif. Since it works fine with OSF Motif
-on a variety of systems, I assume these problems are due to bugs in LessTif.
-Again, any insight would be appreciated.
-.TP 8
-Red Hot Lava
+.B Red Hot Lava
There need to be a lot more graphics hacks. In particular, there should be
a simulation of a Lavalite (tm).
.SH ENVIRONMENT
to get the default host and display number, and to inform the sub-programs
of the screen on which to draw.
.TP 8
+.B PATH
+to find the sub-programs to run.
+.TP 8
.B XENVIRONMENT
to get the name of a resource file that overrides the global resources
stored in the RESOURCE_MANAGER property.
.SH SEE ALSO
.BR X (1),
.BR xscreensaver\-command (1),
-.BR xlock (1),
-.BR xnlock (1),
-.BR xautolock (1),
.BR xdm (1),
+.BR xset (1),
+.BR Xsecurity (1),
+.BR xauth (1),
+.BR xhost (1).
+.BR ant (1),
+.BR atlantis (1),
.BR attraction (1),
+.BR blitspin (1),
+.BR bouboule (1),
+.BR braid (1),
+.BR bsod (1),
+.BR bubbles (1),
+.BR cage (1),
+.BR coral (1),
+.BR cynosure (1),
+.BR decayscreen (1),
+.BR deco (1),
+.BR drift (1),
+.BR epicycle (1),
+.BR fadeplot (1),
+.BR flag (1),
+.BR flame (1),
+.BR forest (1),
+.BR galaxy (1),
+.BR gears (1),
+.BR goop (1),
+.BR grav (1),
.BR greynetic (1),
+.BR halo (1),
.BR helix (1),
.BR hopalong (1),
+.BR hypercube (1),
+.BR ifs (1),
+.BR imsmap (1),
+.BR interference (1),
+.BR jigsaw (1),
+.BR julia (1),
+.BR kaleidescope (1),
+.BR laser (1),
+.BR lightning (1),
+.BR lisa (1),
+.BR lissie (1),
+.BR lmorph (1),
+.BR maze (1),
+.BR moebius (1),
+.BR moire (1),
+.BR moire2 (1),
+.BR morph3d (1),
+.BR mountain (1),
+.BR munch (1),
.BR noseguy (1),
+.BR pedal (1),
+.BR penrose (1),
+.BR pipes (1),
.BR pyro (1),
-.BR xroger (1),
.BR qix (1),
+.BR rd-bomb (1),
.BR rocks (1),
.BR rorschach (1),
-.BR blitspin (1),
-.BR imsmap (1),
-.BR slidescreen (1),
-.BR decayscreen (1),
-.BR maze (1),
-.BR hypercube (1),
-.BR halo (1),
-.BR flame (1),
-.BR pedal (1),
-.BR lmorph (1),
-.BR deco (1),
-.BR moire (1),
-.BR kaleidescope (1),
-.BR bubbles (1),
-.BR lightning (1),
-.BR strange (1),
-.BR fract (1),
-.BR spiral (1),
-.BR laser (1),
-.BR grav (1),
-.BR drift (1),
-.BR ifs (1),
-.BR julia (1),
-.BR penrose (1),
+.BR rotor (1),
+.BR rubik (1),
.BR sierpinski (1),
-.BR hopalong (1),
-.BR braid (1),
-.BR bouboule (1),
-.BR galaxy (1),
-.BR flag (1),
-.BR forest (1),
+.BR slidescreen (1),
+.BR slip (1),
.BR sphere (1),
-.BR lisa (1),
-.BR xdaliclock (1),
-.BR xbouncebits (1),
+.BR spiral (1),
+.BR sproingies (1),
+.BR stairs (1),
+.BR starfish (1),
+.BR strange (1),
+.BR superquadrics (1),
+.BR swirl (1),
+.BR triangle (1),
+.BR truchet (1),
+.BR vines (1),
+.BR worm (1),
+.BR xjack (1),
+.BR xlyap (1),
+.BR xroger (1),
+.BR bongo (1),
.BR ico (1),
+.BR xaos (1),
+.BR xbouncebits (1),
+.BR xcthugha (1),
+.BR xdaliclock (1),
+.BR xfishtank (1),
+.BR xmountains (1),
+.BR xsplinefun (1),
.BR xswarm (1),
-.BR xwave (1),
-.BR xv (1),
.BR xtacy (1),
-.BR bongo (1),
-.BR xfishtank (1)
+.BR xv (1),
+.BR xwave (1).
.SH COPYRIGHT
-Copyright \(co 1991, 1992, 1993, 1994, 1995, 1996, 1997 by Jamie Zawinski.
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that copyright
-notice and this permission notice appear in supporting documentation. No
-representations are made about the suitability of this software for any
-purpose. It is provided "as is" without express or implied warranty.
+Copyright \(co 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
+by Jamie Zawinski. Permission to use, copy, modify, distribute, and sell
+this software and its documentation for any purpose is hereby granted without
+fee, provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in supporting
+documentation. No representations are made about the suitability of this
+software for any purpose. It is provided "as is" without express or implied
+warranty.
.SH AUTHOR
Jamie Zawinski <jwz@netscape.com>. Written in late 1991; first posted
to comp.sources.x on 13-Aug-1992.
Please let me know if you find any bugs or make any improvements.
-
+.SH ACKNOWLEDGEMENTS
Thanks to David Wojtowicz for implementing \fIlockTimeout\fP.
Thanks to Martin Kraemer for adding support for shadow passwords and
Thanks to Patrick Moreau for the VMS port.
+Thanks to Mark Bowyer for figuring out how to hook it up to CDE.
+
And huge thanks to Jon A. Christopher for implementing the Athena dialog
-support, so that locking and demo-mode work even if you don't have Motif.
+support, back in the days before Lesstif was a viable alternative to Motif.
projects / xscreensaver / blobdiff