+/* The interpretation of the ModN modifiers is dependent on what keys
+ are bound to them: Mod1 does not necessarily mean "meta". It only
+ means "meta" if Meta_L or Meta_R are bound to it. If Meta_L is on
+ Mod5, then Mod5 is the one that means Meta. Oh, and Meta and Alt
+ aren't necessarily the same thing. Icepicks in my forehead!
+ */
+static unsigned int
+do_icccm_meta_key_stupidity (Display *dpy)
+{
+ unsigned int modbits = 0;
+ int i, j, k;
+ XModifierKeymap *modmap = XGetModifierMapping (dpy);
+ for (i = 3; i < 8; i++)
+ for (j = 0; j < modmap->max_keypermod; j++)
+ {
+ int code = modmap->modifiermap[i * modmap->max_keypermod + j];
+ KeySym *syms;
+ int nsyms = 0;
+ if (code == 0) continue;
+ syms = XGetKeyboardMapping (dpy, code, 1, &nsyms);
+ for (k = 0; k < nsyms; k++)
+ if (syms[k] == XK_Meta_L || syms[k] == XK_Meta_R ||
+ syms[k] == XK_Alt_L || syms[k] == XK_Alt_R)
+ modbits |= (1 << i);
+ XFree (syms);
+ }
+ XFreeModifiermap (modmap);
+ return modbits;
+}
+
+/* Returns a mask of the bit or bits of a KeyPress event that mean "meta".
+ */
+static unsigned int
+meta_modifier (Display *dpy)
+{
+ static Bool done_once = False;
+ static unsigned int mask = 0;
+ if (!done_once)
+ {
+ /* Really, we are supposed to recompute this if a KeymapNotify
+ event comes in, but fuck it. */
+ done_once = True;
+ mask = do_icccm_meta_key_stupidity (dpy);
+ }
+ return mask;
+}
+
+
+static int
+terminal_keypress_handler (Display *dpy, XEvent *event, void *data)
+{
+ struct terminal_controller_data *mine =
+ (struct terminal_controller_data *) data;
+ KeySym keysym;
+ unsigned char c = 0;
+ XLookupString (&event->xkey, (char *) &c, 1, &keysym, &mine->compose);
+ if (c == 0 || !mine->pipe)
+ return 0;
+
+ if (!mine->swap_bs_del_p) ;
+ else if (c == 127) c = 8;
+ else if (c == 8) c = 127;
+
+ /* If meta was held down, send ESC, or turn on the high bit. */
+ if (event->xkey.state & meta_modifier (dpy))
+ {
+ if (mine->meta_sends_esc_p)
+ fputc ('\033', mine->pipe);
+ else
+ c |= 0x80;
+ }
+
+ fputc (c, mine->pipe);
+ fflush (mine->pipe);
+
+ event->xany.type = 0; /* do not process this event further */
+
+ return 0;
+}
+
+
+static void
+a2_ascii_printc (apple2_state_t *st, unsigned char c,
+ Bool bold_p, Bool blink_p, Bool rev_p,
+ Bool scroll_p)
+{
+ if (c >= 'a' && c <= 'z') /* upcase lower-case chars */
+ {
+ c &= 0xDF;
+ }
+ else if ((c >= 'A'+128) || /* upcase and blink */
+ (c < ' ' && c != 014 && /* high-bit & ctl chrs */
+ c != '\r' && c != '\n' && c!='\t'))
+ {
+ c = (c & 0x1F) | 0x80;
+ }
+ else if (c >= 'A' && c <= 'Z') /* invert upper-case chars */
+ {
+ c |= 0x80;
+ }
+
+ if (bold_p) c |= 0xc0;
+ if (blink_p) c = (c & ~0x40) | 0x80;
+ if (rev_p) c |= 0xc0;
+
+ if (scroll_p)
+ a2_printc(st, c);
+ else
+ a2_printc_noscroll(st, c);
+}
+
+
+static void
+a2_vt100_printc (apple2_sim_t *sim, struct terminal_controller_data *state,
+ unsigned char c)
+{
+ apple2_state_t *st=sim->st;
+ int cols = SCREEN_COLS;
+ int rows = SCREEN_ROWS;
+
+ int i;
+ int start, end;
+
+ switch (state->escstate)
+ {
+ case 0:
+ switch (c)
+ {
+ case 7: /* BEL */
+ /* Dummy case - we don't want the screensaver to beep */
+ /* #### But maybe this should flash the screen? */
+ break;
+ case 8: /* BS */
+ if (state->cursor_x > 0)
+ state->cursor_x--;
+ break;
+ case 9: /* HT */
+ if (state->cursor_x < cols - 8)
+ {
+ state->cursor_x = (state->cursor_x & ~7) + 8;
+ }
+ else
+ {
+ state->cursor_x = 0;
+ if (state->cursor_y < rows - 1)
+ state->cursor_y++;
+ else
+ a2_scroll (st);
+ }
+ break;
+ case 10: /* LF */
+ case 11: /* VT */
+ case 12: /* FF */
+ if (state->cursor_y < rows - 1)
+ state->cursor_y++;
+ else
+ a2_scroll (st);
+ break;
+ case 13: /* CR */
+ state->cursor_x = 0;
+ break;
+ case 14: /* SO */
+ case 15: /* SI */
+ /* Dummy case - there is one and only one font. */
+ break;
+ case 24: /* CAN */
+ case 26: /* SUB */
+ /* Dummy case - these interrupt escape sequences, so
+ they don't do anything in this state */
+ break;
+ case 27: /* ESC */
+ state->escstate = 1;
+ break;
+ case 127: /* DEL */
+ /* Dummy case - this is supposed to be ignored */
+ break;
+ case 155: /* CSI */
+ state->escstate = 2;
+ for(i = 0; i < NPAR; i++)
+ state->csiparam[i] = 0;
+ state->curparam = 0;
+ break;
+ default:
+ /* If the cursor is in column 39 and we print a character, then
+ that character shows up in column 39, and the cursor is no longer
+ visible on the screen (it's in "column 40".) If another character
+ is printed, then that character shows up in column 0, and the
+ cursor moves to column 1.
+
+ This is empirically what xterm and gnome-terminal do, so that must
+ be the right thing. (In xterm, the cursor vanishes, whereas; in
+ gnome-terminal, the cursor overprints the character in col 39.)
+ */
+ if (state->cursor_x >= cols)
+ {
+ state->cursor_x = 0;
+ if (state->cursor_y >= rows - 1)
+ a2_scroll (st);
+ else
+ state->cursor_y++;
+ }
+
+ a2_goto(st, state->cursor_y, state->cursor_x); /* clips range */
+ a2_ascii_printc (st, c,
+ state->termattrib.bf.bold,
+ state->termattrib.bf.blink,
+ state->termattrib.bf.rev,
+ False);
+ state->cursor_x++;
+
+ break;
+ }
+ break;
+ case 1:
+ switch (c)
+ {
+ case 24: /* CAN */
+ case 26: /* SUB */
+ state->escstate = 0;
+ break;
+ case 'c': /* Reset */
+ a2_cls(st);
+ state->escstate = 0;
+ break;
+ case 'D': /* Linefeed */
+ if (state->cursor_y < rows - 1)
+ state->cursor_y++;
+ else
+ a2_scroll (st);
+ state->escstate = 0;
+ break;
+ case 'E': /* Newline */
+ state->cursor_x = 0;
+ state->escstate = 0;
+ break;
+ case 'M': /* Reverse newline */
+ if (state->cursor_y > 0)
+ state->cursor_y--;
+ state->escstate = 0;
+ break;
+ case '7': /* Save state */
+ state->saved_x = state->cursor_x;
+ state->saved_y = state->cursor_y;
+ state->escstate = 0;
+ break;
+ case '8': /* Restore state */
+ state->cursor_x = state->saved_x;
+ state->cursor_y = state->saved_y;
+ state->escstate = 0;
+ break;
+ case '[': /* CSI */
+ state->escstate = 2;
+ for(i = 0; i < NPAR; i++)
+ state->csiparam[i] = 0;
+ state->curparam = 0;
+ break;
+ case '%': /* Select charset */
+ /* No, I don't support UTF-8, since the apple2 font
+ isn't even Unicode anyway. We must still catch the
+ last byte, though. */
+ case '(':
+ case ')':
+ /* I don't support different fonts either - see above
+ for SO and SI */
+ state->escstate = 3;
+ break;
+ default:
+ /* Escape sequences not supported:
+ *
+ * H - Set tab stop
+ * Z - Terminal identification
+ * > - Keypad change
+ * = - Other keypad change
+ * ] - OS command
+ */
+ state->escstate = 0;
+ break;
+ }
+ break;
+ case 2:
+ switch (c)
+ {
+ case 24: /* CAN */
+ case 26: /* SUB */
+ state->escstate = 0;
+ break;
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ if (state->curparam < NPAR)
+ state->csiparam[state->curparam] =
+ (state->csiparam[state->curparam] * 10) + (c - '0');
+ break;
+ case ';':
+ state->csiparam[++state->curparam] = 0;
+ break;
+ case '[':
+ state->escstate = 3;
+ break;
+ case '@':
+ for (i = 0; i < state->csiparam[0]; i++)
+ {
+ if(++state->cursor_x > cols)
+ {
+ state->cursor_x = 0;
+ if (state->cursor_y < rows - 1)
+ state->cursor_y++;
+ else
+ a2_scroll (st);
+ }
+ }
+ state->escstate = 0;
+ break;
+ case 'F':
+ state->cursor_x = 0;
+ case 'A':
+ if (state->csiparam[0] == 0)
+ state->csiparam[0] = 1;
+ if ((state->cursor_y -= state->csiparam[0]) < 0)
+ state->cursor_y = 0;
+ state->escstate = 0;
+ break;
+ case 'E':
+ state->cursor_x = 0;
+ case 'e':
+ case 'B':
+ if (state->csiparam[0] == 0)
+ state->csiparam[0] = 1;
+ if ((state->cursor_y += state->csiparam[0]) >= rows)
+ state->cursor_y = rows - 1;
+ state->escstate = 0;
+ break;
+ case 'a':
+ case 'C':
+ if (state->csiparam[0] == 0)
+ state->csiparam[0] = 1;
+ if ((state->cursor_x += state->csiparam[0]) >= cols)
+ state->cursor_x = cols - 1;
+ state->escstate = 0;
+ break;
+ case 'D':
+ if (state->csiparam[0] == 0)
+ state->csiparam[0] = 1;
+ if ((state->cursor_x -= state->csiparam[0]) < 0)
+ state->cursor_x = 0;
+ state->escstate = 0;
+ break;
+ case 'd':
+ if ((state->cursor_y = (state->csiparam[0] - 1)) >= rows)
+ state->cursor_y = rows - 1;
+ state->escstate = 0;
+ break;
+ case '`':
+ case 'G':
+ if ((state->cursor_x = (state->csiparam[0] - 1)) >= cols)
+ state->cursor_x = cols - 1;
+ state->escstate = 0;
+ break;
+ case 'f':
+ case 'H':
+ if ((state->cursor_y = (state->csiparam[0] - 1)) >= rows)
+ state->cursor_y = rows - 1;
+ if ((state->cursor_x = (state->csiparam[1] - 1)) >= cols)
+ state->cursor_x = cols - 1;
+ if(state->cursor_y < 0)
+ state->cursor_y = 0;
+ if(state->cursor_x < 0)
+ state->cursor_x = 0;
+ state->escstate = 0;
+ break;
+ case 'J':
+ start = 0;
+ end = rows * cols;
+ if (state->csiparam[0] == 0)
+ start = cols * state->cursor_y + state->cursor_x;
+ if (state->csiparam[0] == 1)
+ end = cols * state->cursor_y + state->cursor_x;
+
+ a2_goto(st, state->cursor_y, state->cursor_x);
+ for (i = start; i < end; i++)
+ {
+ a2_ascii_printc(st, ' ', False, False, False, False);
+ }
+ state->escstate = 0;
+ break;
+ case 'K':
+ start = 0;
+ end = cols;
+ if (state->csiparam[0] == 0)
+ start = state->cursor_x;
+ if (state->csiparam[1] == 1)
+ end = state->cursor_x;
+
+ a2_goto(st, state->cursor_y, state->cursor_x);
+ for (i = start; i < end; i++)
+ {
+ a2_ascii_printc(st, ' ', False, False, False, False);
+ }
+ state->escstate = 0;
+ break;
+ case 'm': /* Set attributes */
+ for (i = 0; i <= state->curparam; i++)
+ {
+ switch(state->csiparam[i])
+ {
+ case 0:
+ state->termattrib.w = 0;
+ break;
+ case 1:
+ state->termattrib.bf.bold = 1;
+ break;
+ case 5:
+ state->termattrib.bf.blink = 1;
+ break;
+ case 7:
+ state->termattrib.bf.rev = 1;
+ break;
+ case 21:
+ case 22:
+ state->termattrib.bf.bold = 0;
+ break;
+ case 25:
+ state->termattrib.bf.blink = 0;
+ break;
+ case 27:
+ state->termattrib.bf.rev = 0;
+ break;
+ }
+ }
+ state->escstate = 0;
+ break;
+ case 's': /* Save position */
+ state->saved_x = state->cursor_x;
+ state->saved_y = state->cursor_y;
+ state->escstate = 0;
+ break;
+ case 'u': /* Restore position */
+ state->cursor_x = state->saved_x;
+ state->cursor_y = state->saved_y;
+ state->escstate = 0;
+ break;
+ case '?': /* DEC Private modes */
+ if ((state->curparam != 0) || (state->csiparam[0] != 0))
+ state->escstate = 0;
+ break;
+ default:
+ /* Known unsupported CSIs:
+ *
+ * L - Insert blank lines
+ * M - Delete lines (I don't know what this means...)
+ * P - Delete characters
+ * X - Erase characters (difference with P being...?)
+ * c - Terminal identification
+ * g - Clear tab stop(s)
+ * h - Set mode (Mainly due to its complexity and lack of good
+ docs)
+ * l - Clear mode
+ * m - Set mode (Phosphor is, per defenition, green on black)
+ * n - Status report
+ * q - Set keyboard LEDs
+ * r - Set scrolling region (too exhausting - noone uses this,
+ right?)
+ */
+ state->escstate = 0;
+ break;
+ }
+ break;
+ case 3:
+ state->escstate = 0;
+ break;
+ }
+ a2_goto(st, state->cursor_y, state->cursor_x);
+}
+
+