1 # configure.in --- xscreensaver, Copyright (c) 1997-2014 Jamie Zawinski.
5 AC_INIT(driver/subprocs.c)
6 AC_CONFIG_HEADERS([config.h])
8 echo "current directory: `pwd`"
9 echo "command line was: $0 $@"
11 ###############################################################################
15 ###############################################################################
18 /* config.h.in --- xscreensaver, Copyright (c) 1991-2014 Jamie Zawinski.
20 * The best way to set these parameters is by running the included `configure'
21 * script. That examines your system, and generates `config.h' from
24 * If something goes very wrong, you can edit `config.h' directly, but beware
25 * that your changes will be lost if you ever run `configure' again.
29 AH_TEMPLATE([HAVE_READ_DISPLAY_EXTENSION],
30 [Define this if you have the XReadDisplay extension (I think
31 this is an SGI-only thing; it's in
32 <X11/extensions/readdisplay.h>.) A few of the screenhacks will
33 take advantage of this if it's available.])
35 AH_TEMPLATE([HAVE_XHPDISABLERESET],
36 [Define this if you have the XHPDisableReset function (an HP only
37 thing which allows the Ctrl-Sh-Reset key sequence to be
38 temporarily disabled.)])
40 # This only ever existed in X11R4 and X11R5.
41 #AH_TEMPLATE([HAVE_XIDLE_EXTENSION],
42 # [Define this if you have the XIDLE extension installed. If you
43 # have the XIDLE extension, this is recommended. (You have this
44 # extension if the file /usr/include/X11/extensions/xidle.h
45 # exists.) Turning on this flag lets XScreenSaver work better with
46 # servers which support this extension; but it will still work
47 # with servers which do not suport it, so it's a good idea to
48 # compile in support for it if you can.])
50 # Using this extension will crash your X server and make fading not work.
51 #AH_TEMPLATE([HAVE_MIT_SAVER_EXTENSION],
52 # [Define this if you have the MIT-SCREEN-SAVER extension
53 # installed. See the caveats about this extension, above.
54 # (It's available if /usr/include/X11/extensions/scrnsaver.h
57 # This only ever existed on SGI hardware.
58 #AH_TEMPLATE([HAVE_SGI_SAVER_EXTENSION],
59 # [Define this if you have the SGI SCREEN_SAVER extension. This is
60 # standard on Irix systems, and not available elsewhere.])
62 # This only ever existed on SGI hardware.
63 #AH_TEMPLATE([HAVE_SGI_VC_EXTENSION],
64 # [Define this if you have the SGI-VIDEO-CONTROL extension. This
65 # is standard on Irix systems, and not available elsewhere.])
67 AH_TEMPLATE([HAVE_DPMS_EXTENSION],
68 [Define this if you have the XDPMS extension. This is standard
69 on sufficiently-recent XFree86 systems, and possibly elsewhere.
70 (It's available if the file /usr/include/X11/extensions/dpms.h
73 AH_TEMPLATE([HAVE_XF86VMODE],
74 [Define this if you have the functions XF86VidModeGetModeLine()
75 and XF86VidModeGetViewPort(), in support of virtual desktops
76 where the X server's root window is bigger than the actual
77 screen. This is an XFree86 thing, and probably doesn't exist
78 elsewhere. (It's available if the file
79 /usr/include/X11/extensions/xf86vmode.h exists.)])
81 AH_TEMPLATE([HAVE_XF86VMODE_GAMMA],
82 [Define this if you have the functions XF86VidModeGetGamma() and
83 XF86VidModeSetGamma(), which allow clients to change the gamma
84 response of the monitor. This is an XFree86 4.0.x thing, and
85 probably doesn't exist elsewhere. (It's available if the file
86 /usr/include/X11/extensions/xf86vmode.h exists and has stuff about
89 AH_TEMPLATE([HAVE_XF86VMODE_GAMMA_RAMP],
90 [Define this if you have the functions XF86VidModeGetGammaRamp()
91 and XF86VidModeSetGammaRamp(), which provide finer-grained
92 control than XF86VidMode[GS]etGamma(). These appeared in
95 AH_TEMPLATE([HAVE_XINERAMA],
96 [Define this if you have the Xinerama extension. This is
97 standard on sufficiently-recent XFree86 systems, and possibly
98 elsewhere. (It's available if the file
99 /usr/include/X11/extensions/Xinerama.h exists.)])
101 AH_TEMPLATE([HAVE_XINPUT],
102 [Define this if you have the Xinput extension. This is
103 standard since X11R5, and is thus almost everywhere.
104 (It's available if the file /usr/include/X11/extensions/XInput.h
107 AH_TEMPLATE([HAVE_XF86MISCSETGRABKEYSSTATE],
108 [Define this if you have the XF86MiscSetGrabKeysState function
109 (which allows the Ctrl-Alt-KP_star and Ctrl-Alt-KP_slash key
110 sequences to be temporarily disabled. Sadly, it doesn't affect
111 Ctrl-Alt-BS or Ctrl-Alt-F1.)])
113 AH_TEMPLATE([HAVE_RANDR],
114 [Define this if you have the Resize and Rotate extension.
115 This is standard on sufficiently-recent XFree86 systems, and
116 possibly elsewhere. (It's available if the file
117 /usr/include/X11/extensions/Xrandr.h exists.)])
119 AH_TEMPLATE([HAVE_RANDR_12],
120 [Define this if the RANDR library is version 1.2 or newer.])
122 AH_TEMPLATE([HAVE_PROC_INTERRUPTS],
123 [Define this if you have a Linux-like /proc/interrupts file which
124 can be examined to determine when keyboard activity has
127 AH_TEMPLATE([HAVE_MOTIF],[Define this if you have Motif.])
129 AH_TEMPLATE([HAVE_XMCOMBOBOX],
130 [Define this if you have the XmComboBox Motif widget (Motif 2.0.)])
132 AH_TEMPLATE([HAVE_GTK],[Define this if you have Gtk (any version.)])
133 AH_TEMPLATE([HAVE_GTK2],[Define this if you have Gtk 2.x.])
135 AH_TEMPLATE([HAVE_CRAPPLET],
136 [Define this if you have Gnome and want to build support for the
137 xscreensaver control panel in the Gnome Control Center
138 (gnomecc). (This is needed only with Gtk 1.x.)])
140 AH_TEMPLATE([HAVE_CRAPPLET_IMMEDIATE],
141 [Define this if HAVE_CRAPPLET is defined, and the function
142 capplet_widget_changes_are_immediate() is available.])
144 AH_TEMPLATE([HAVE_XML],[Define this if you have the XML library.])
146 AH_TEMPLATE([HAVE_OLD_XML_HEADERS],
147 [Define this if you have the XML library headers in their old,
148 non-namespaced location (you lack the gnome-xml/libxml symlink)])
150 AH_TEMPLATE([HAVE_XPM],
151 [Define this if you have the XPM library installed. Some of the
152 demos can make use of this if it is available.])
154 AH_TEMPLATE([HAVE_GDK_PIXBUF],
155 [Define this if you have the GDK_Pixbuf library installed. Some
156 of the demos can make use of this if it is available.])
158 AH_TEMPLATE([HAVE_GDK_PIXBUF_APPLY_EMBEDDED_ORIENTATION],
159 [Define this if you have the gdk_pixbuf_apply_embedded_orientation
160 function (gdk-pixbuf 2.12).])
162 AH_TEMPLATE([HAVE_JPEGLIB],
163 [Define this if you have the Independent JPEG Group's JPEG
164 library installed. Some of the demos can make use of this if it
167 AH_TEMPLATE([HAVE_XMU],
168 [Define this if you have the Xmu library. This is standard part
169 of X, and if your vendor doesn't ship it, you should report that
172 AH_TEMPLATE([HAVE_XUTF8DRAWSTRING],
173 [Define this if you have the function Xutf8DrawString().])
175 AH_TEMPLATE([HAVE_XFT],
176 [Define this if you have libXft2.])
178 AH_TEMPLATE([HAVE_GL],
179 [Define this if you have OpenGL. Some of the demos require it,
180 so if you don't have it, then those particular demos won't be
181 built. (This won't affect the screen saver as a whole.)])
183 AH_TEMPLATE([HAVE_MESA_GL],
184 [Define this if you have OpenGL, but it's the MesaGL variant.
185 (The libraries have different names.) (HAVE_GL should be defined
188 AH_TEMPLATE([HAVE_GLBINDTEXTURE],
189 [Define this if your version of OpenGL has the glBindTexture()
190 routine. This is the case for OpenGL 1.1, but not for OpenGL
193 AH_TEMPLATE([HAVE_GLE],
194 [Define this if you have the -lgle and -lmatrix libraries (GL
197 AH_TEMPLATE([HAVE_GLE3],[Define this if you have the -lgle from GLE version 3])
199 AH_TEMPLATE([HAVE_JWZGLES],[Define this to target the OpenGL ES 1.x API
200 instead of OpenGL 1.3.])
202 AH_TEMPLATE([HAVE_XSHM_EXTENSION],
203 [Define this if you have the X Shared Memory Extension.])
205 AH_TEMPLATE([HAVE_DOUBLE_BUFFER_EXTENSION],
206 [Define this if you have the X Double Buffer Extension.])
208 AH_TEMPLATE([FORTUNE_PROGRAM],
209 [Some screenhacks like to run an external program to generate
210 random pieces of text; set this to the one you like. Note that
211 this is just the default; X resources can be used to override
214 AH_TEMPLATE([PASSWD_HELPER_PROGRAM],
215 [Set the name of the password helper program, if any])
217 AH_TEMPLATE([NO_LOCKING],
218 [Define this to remove the option of locking the screen at all.])
220 AH_TEMPLATE([ALLOW_ROOT_PASSWD],
221 [Define this to allow the root password to unlock the screen.])
223 AH_TEMPLATE([HAVE_KERBEROS],
224 [Define this if you want to use Kerberos authentication to
225 lock/unlock the screen instead of your local password. This
226 currently uses Kerberos V4, but a V5 server with V4
227 compatibility will work. WARNING: DO NOT USE AFS string-to-key
228 passwords with this option. This option currently *only* works
229 with standard Kerberos des_string_to_key. If your password is
230 an AFS password and not a kerberos password, it will not
231 authenticate properly. See the comments in driver/kpasswd.c for
232 more information if you need it.])
234 AH_TEMPLATE([HAVE_KERBEROS5],
235 [Define this if you have Kerberos 5, meaning we need to use the
236 Kerberos 4 compatibility layer.])
238 AH_TEMPLATE([HAVE_PAM],
239 [Define this if you want to use PAM (Pluggable Authentication
240 Modules) to lock/unlock the screen, instead of standard
241 /etc/passwd authentication.])
243 AH_TEMPLATE([PAM_SERVICE_NAME],
244 [If PAM is being used, this is the name of the PAM service that
245 xscreensaver will authenticate as. The default is
246 "xscreensaver", which means that the PAM library will look for
247 an "xscreensaver" line in /etc/pam.conf, or (on recent Linux
248 systems) will look for a file called /etc/pam.d/xscreensaver.
249 Some systems might already have a PAM installation that is
250 configured for xlock, so setting this to "xlock" would also work
253 AH_TEMPLATE([HAVE_PAM_FAIL_DELAY],
254 [Define this if you have pam_fail_delay function.
255 see driver/passwd-pam.c.])
257 AH_TEMPLATE([PAM_CHECK_ACCOUNT_TYPE],
258 [Whether PAM should check the result of account modules
259 when authenticating. Only do this if you have account
260 configured properly on your system.])
262 AH_TEMPLATE([PAM_STRERROR_TWO_ARGS],
263 [Define if you have PAM and pam_strerror() requires two
266 AH_TEMPLATE([HAVE_SIGTIMEDWAIT],
267 [Define to 1 if you have the `sigtimedwait' function.])
269 AH_TEMPLATE([HAVE_SHADOW_PASSWD],
270 [Define this if your system uses 'shadow' passwords, that is, the
271 passwords live in /etc/shadow instead of /etc/passwd, and one
272 reads them with getspnam() instead of getpwnam(). (Note that
273 SCO systems do some random other thing; others might as well.
274 See the ifdefs in driver/passwd-pwent.c if you're having trouble
275 related to reading passwords.)])
277 AH_TEMPLATE([HAVE_ENHANCED_PASSWD],
278 [Define this if your system is Digital or SCO Unix with so-called
279 ``Enhanced Security'', that is, the passwords live in
280 /tcb/files/auth/<x>/<xyz> instead of in /etc/passwd, and one
281 reads them with getprpwnam() instead of getpwnam().])
283 AH_TEMPLATE([HAVE_ADJUNCT_PASSWD],
284 [Define this if your system is Solaris with ``adjunct'' passwords
285 (this is the version where one gets at the passwords with
286 getpwanam() instead of getpwnam().) I haven't tested this one,
287 let me know if it works.])
289 AH_TEMPLATE([HAVE_HPUX_PASSWD],
290 [Define this if you are running HPUX with so-called ``Secure
291 Passwords'' (if you have /usr/include/hpsecurity.h, you probably
292 have this.) I haven't tested this one, let me know if it works.])
294 AH_TEMPLATE([HAVE_SYSLOG],
295 [Define this if you the openlog(), syslog(), and closelog()
296 functions. This is used for logging failed login attempts.])
298 AH_TEMPLATE([HAVE_ICMP],
299 [Define this if you do pings with a `struct icmp' and an
302 AH_TEMPLATE([HAVE_ICMPHDR],
303 [Define this if you do pings with a `struct icmphdr' and an
306 AH_TEMPLATE([HAVE_GETIFADDRS],
307 [Define this if you have the getifaddrs() function.])
309 AH_TEMPLATE([HAVE_FORKPTY],
310 [Define this if you have the 'forkpty' function:
311 This allows 'phosphor' and 'apple2' to run curses-based
312 programs, or be used as terminal windows.])
314 AH_TEMPLATE([HAVE_GETTIMEOFDAY],
315 [Define this if you have the gettimeofday function.])
317 AH_TEMPLATE([GETTIMEOFDAY_TWO_ARGS],
318 [Define this if gettimeofday() takes two arguments.])
320 AH_TEMPLATE([XPointer],
321 [Define this to void* if you're using X11R4 or earlier.])
323 AH_TEMPLATE([HAVE_PTHREAD],
324 [Define this if your system supports POSIX threads.])
326 AH_TEMPLATE([HAVE_RECORD_ANIM],
327 [Define this to enable recording of videos.])
329 # After checking to see that --srcdir is correct (which AC_INIT does)
330 # check for some random other files that come later in the tar file,
331 # to make sure everything is here.
333 for d in utils jwxyz hacks hacks/glx driver ; do
334 f=$srcdir/$d/Makefile.in
335 if test \! -r $f ; then
337 echo "ERROR: The package is incomplete: $f does not exist."
338 echo " This probably means that your download was truncated."
344 ###############################################################################
346 # Query AX_PTHREAD, and figure out which compiler gets used.
348 ###############################################################################
350 AC_DEFUN([AC_PROG_CC_PTHREAD],
352 with_pthread_req=unspecified
354 # AX_PTHREAD is from the GNU Autoconf Archive.
355 # https://savannah.gnu.org/projects/autoconf-archive/
356 m4_include(ax_pthread.m4)
358 # This affects CC, LIBS, and CFLAGS, instead of defining new variables.
360 AC_ARG_WITH([pthread],
361 [ --with-pthread Enables POSIX threads, for SMP support.],
362 [with_pthread="$withval"; with_pthread_req="$withval"],
365 if test "$with_pthread" = yes; then
366 # AX_PTHREAD might want a different compiler.
368 [if test "$CC" = "$PTHREAD_CC" -o -z "$ac_original_cc"; then
371 ac_prog_cc_no_pthread=yes
375 if test "$have_pthread" = yes; then
376 AC_DEFINE([HAVE_PTHREAD])
383 ###############################################################################
385 # Function to figure out how to run the compiler.
387 ###############################################################################
389 AC_DEFUN([AC_PROG_CC_ANSI],
390 [AC_REQUIRE([AC_PROG_CC])
392 if test -z "$GCC"; then
394 AC_MSG_CHECKING(how to request ANSI compilation)
397 AC_MSG_RESULT(HPUX: adding -Ae)
401 AC_MSG_RESULT(AIX: adding -qlanglvl=ansi -qhalt=e)
402 CC="$CC -qlanglvl=ansi -qhalt=e"
405 AC_MSG_RESULT(DEC: adding -std1 -ieee)
409 AC_MSG_RESULT(no idea)
416 AC_MSG_RESULT(Solaris: adding -D__EXTENSIONS__)
417 CC="$CC -D__EXTENSIONS__"
424 AC_MSG_CHECKING([whether the compiler works on ANSI C])
425 AC_TRY_RUN([ main(int ac, char **av) { return 0; } ],
428 AC_MSG_ERROR(Couldn't build even a trivial ANSI C program: check CC.),
429 AC_MSG_ERROR(Couldn't build even a trivial ANSI C program: check CC.))
431 if test -n "$GCC"; then
432 AC_MSG_RESULT(Turning on gcc compiler warnings.)
433 CC="$CC -pedantic -Wall -Wstrict-prototypes -Wnested-externs -Wmissing-prototypes"
435 # As of gcc 3.4, we have "-Wdeclaration-after-statement"
436 # and so perhaps now we can do without -pedantic?
439 *-irix5* |*-irix6.[0-3]* )
440 AC_MSG_RESULT(Turning on SGI compiler warnings.)
441 CC="$CC -fullwarn -use_readonly_const -rdata_shared -g3"
444 # if test -z "$GCC"; then
445 # AC_MSG_RESULT(Turning on DEC C compiler warnings.)
446 # CC="$CC -migrate -w0 -verbose -warnprotos"
454 ###############################################################################
456 # Check for availability of various gcc command-line options.
458 ###############################################################################
460 AC_DEFUN([AC_CHECK_GCC_ARG],
461 [if test -n "$GCC"; then
462 AC_CACHE_CHECK([whether gcc accepts [$2]],
463 ac_cv_gcc_accepts_[$1],
464 [rm -rf conftest.$ac_ext
465 touch conftest.$ac_ext
466 if ( ( gcc -c [$2] conftest.$ac_ext -o/dev/null >/dev/null ) 2>&1 | \
467 grep unrecognized >/dev/null ); then
468 ac_cv_gcc_accepts_[$1]=no
470 ac_cv_gcc_accepts_[$1]=yes
473 ac_gcc_accepts_[$1]="$ac_cv_gcc_accepts_[$1]"
477 AC_DEFUN([AC_NO_LONG_STRING_WARNINGS],
478 [AC_CHECK_GCC_ARG(no_overlength, -Wno-overlength-strings)])
480 AC_DEFUN([AC_NO_MISPLACED_DECLARATIONS],
481 [AC_CHECK_GCC_ARG(no_decl_after, -Wdeclaration-after-statement)])
483 # Need to disable Objective C extensions in ANSI C on MacOS X to work
484 # around an Apple-specific gcc bug.
486 AC_DEFUN([AC_NO_OBJECTIVE_C],
487 [AC_CHECK_GCC_ARG(no_cpp_precomp, -no-cpp-precomp)])
489 ###############################################################################
491 # Function to figure out how to disable // comments in ANSI C code.
493 # (With recent gcc, this is done with "-std=c89". With older gcc, this
494 # is done by passing "-lang-c89" to cpp, by passing "-Wp,-lang-c89" to
495 # gcc. Old gcc doesn't support -std, and new gcc doesn't support -lang.
496 # so much for compatibility!)
498 # UPDATE: apparently there is NO WAY to tell gcc 3.2.2 to require that
499 # declarations preceed statements, without resorting to "-pedantic".
500 # This means that there is no way to get gcc3 to issue warnings that
501 # ensure that your code complies with the ANSI/ISO C89 standard, without
502 # also drowning in totally useless warnings. Thank you master may I
505 # So, I give up, let's just use -pedantic.
507 ###############################################################################
509 AC_DEFUN([AC_GCC_ACCEPTS_STD], [
512 # Fucking Apple let // comments sneak into OpenGL headers, so
513 # we *must* allow // comments when compiling on Mac OS 10.6! FUCK!
516 AC_CHECK_GCC_ARG(std, -std=c89)
521 AC_DEFUN([AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE],
522 [if test -n "$GCC"; then
524 AC_MSG_RESULT(Disabling C++ comments in ANSI C code.)
526 # The reason that // comments are banned from xscreensaver is that gcc is
527 # basically the only compiler in the world that supports them in C code.
528 # All other vendors support them only in their C++ compilers, not in their
529 # ANSI C compilers. This means that it's a portability problem: every time
530 # these comments have snuck into the xscreensaver source code, I've gotten
531 # complaints about it the next day. So we turn off support for them in gcc
532 # as well to prevent them from accidentially slipping in.
534 if test "$ac_gcc_accepts_std" = yes ; then
536 # -std=c89 defines __STRICT_ANSI__, which we don't want.
537 # (That appears to be the only additional preprocessor symbol
538 # it defines, in addition to the syntax changes it makes.)
540 # -std=gnu89 is no good, because // comments were a GNU extension
541 # before they were in the ANSI C 99 spec... (gcc 2.96 permits //
542 # with -std=gnu89 but not with -std=c89.)
544 # $CC already contains "-std=c89" via AC_GCC_ACCEPTS_STD
545 CC="$CC -U__STRICT_ANSI__"
548 # CC="$CC -Wp,-lang-c89"
554 ###############################################################################
556 # Function to figure out how to create directory trees.
558 ###############################################################################
560 AC_DEFUN([AC_PROG_INSTALL_DIRS],
561 [AC_CACHE_CHECK([whether "\${INSTALL} -d" creates intermediate directories],
562 ac_cv_install_d_creates_dirs,
563 [ac_cv_install_d_creates_dirs=no
565 if mkdir conftestdir; then
566 cd conftestdir 2>/dev/null
567 ${INSTALL} -d `pwd`/dir1/dir2 >/dev/null 2>&1
568 if test -d dir1/dir2/. ; then
569 ac_cv_install_d_creates_dirs=yes
576 if test "$ac_cv_install_d_creates_dirs" = no ; then
577 AC_CACHE_CHECK([whether "mkdir -p" creates intermediate directories],
578 ac_cv_mkdir_p_creates_dirs,
579 [ac_cv_mkdir_p_creates_dirs=no
581 if mkdir conftestdir; then
582 cd conftestdir 2>/dev/null
583 mkdir -p dir1/dir2 >/dev/null 2>&1
584 if test -d dir1/dir2/. ; then
585 ac_cv_mkdir_p_creates_dirs=yes
593 if test "$ac_cv_install_d_creates_dirs" = yes ; then
594 INSTALL_DIRS='${INSTALL} -d'
595 elif test "$ac_cv_mkdir_p_creates_dirs" = yes ; then
596 INSTALL_DIRS='mkdir -p'
599 INSTALL_DIRS='${INSTALL} -d'
604 ###############################################################################
606 # Function to check whether gettimeofday() exists, and how to call it.
607 # This may define HAVE_GETTIMEOFDAY and GETTIMEOFDAY_TWO_ARGS.
609 ###############################################################################
611 AC_DEFUN([AC_GETTIMEOFDAY_ARGS],
612 [AC_MSG_CHECKING(how to call gettimeofday)
613 AC_CACHE_VAL(ac_cv_gettimeofday_args,
614 [AC_TRY_COMPILE([#include <stdlib.h>
615 #include <sys/time.h>],
616 [struct timeval tv; struct timezone tzp;
617 gettimeofday(&tv, &tzp);],
618 [ac_gettimeofday_args=2],
619 [AC_TRY_COMPILE([#include <stdlib.h>
620 #include <sys/time.h>],
621 [struct timeval tv; gettimeofday(&tv);],
622 [ac_gettimeofday_args=1],
623 [ac_gettimeofday_args=0])])
624 ac_cv_gettimeofday_args=$ac_gettimeofday_args])
625 ac_gettimeofday_args=$ac_cv_gettimeofday_args
626 if test "$ac_gettimeofday_args" = 1 ; then
627 AC_DEFINE(HAVE_GETTIMEOFDAY)
628 AC_MSG_RESULT(one argument)
629 elif test "$ac_gettimeofday_args" = 2 ; then
630 AC_DEFINE(HAVE_GETTIMEOFDAY)
631 AC_DEFINE(GETTIMEOFDAY_TWO_ARGS)
632 AC_MSG_RESULT(two arguments)
634 AC_MSG_RESULT(unknown)
639 ###############################################################################
641 # Function to find perl5 (defines PERL and PERL_VERSION.)
643 ###############################################################################
645 # M4 sucks!! perl sucks too!!
647 perl_version_cmd='print $]'
650 AC_DEFUN([AC_PROG_PERL],
651 [AC_PATH_PROGS(PERL, [perl5 perl],,)
652 if test -z "$PERL" ; then
655 AC_CACHE_CHECK([perl version], ac_cv_perl_version,
656 [ac_cv_perl_version=`$PERL -e "$perl_version_cmd"`])
657 PERL_VERSION=$ac_cv_perl_version
662 ###############################################################################
664 # Function to demand "bc". Losers.
666 ###############################################################################
668 AC_DEFUN([AC_DEMAND_BC],
669 [ac_bc_result=`echo 6+9 | bc 2>/dev/null`
670 AC_MSG_CHECKING([for bc])
671 if test "$ac_bc_result" = "15" ; then
676 AC_MSG_ERROR([Your system doesn't have \"bc\", which has been a standard
677 part of Unix since the 1970s. Come back when your vendor
682 ###############################################################################
684 # Functions to check how to do ICMP PING requests.
686 ###############################################################################
688 AC_DEFUN([AC_CHECK_ICMP],
689 [AC_CACHE_CHECK([for struct icmp], ac_cv_have_icmp,
690 [AC_TRY_COMPILE([#include <stdlib.h>
697 #include <sys/types.h>
698 #include <sys/time.h>
701 #include <sys/socket.h>
702 #include <netinet/in_systm.h>
703 #include <netinet/in.h>
704 #include <netinet/ip.h>
705 #include <netinet/ip_icmp.h>
706 #include <netinet/udp.h>
707 #include <arpa/inet.h>
711 struct sockaddr_in si;
713 i.icmp_type = ICMP_ECHO;
718 si.sin_family = AF_INET;
719 #if defined(__DECC) || defined(_IP_VHL)
725 [ac_cv_have_icmp=yes],
726 [ac_cv_have_icmp=no])])
727 if test "$ac_cv_have_icmp" = yes ; then
731 AC_DEFUN([AC_CHECK_ICMPHDR],
732 [AC_CACHE_CHECK([for struct icmphdr], ac_cv_have_icmphdr,
733 [AC_TRY_COMPILE([#include <stdlib.h>
740 #include <sys/types.h>
741 #include <sys/time.h>
744 #include <sys/socket.h>
745 #include <netinet/in_systm.h>
746 #include <netinet/in.h>
747 #include <netinet/ip.h>
748 #include <netinet/ip_icmp.h>
749 #include <netinet/udp.h>
750 #include <arpa/inet.h>
754 struct sockaddr_in si;
760 i.un.echo.sequence = 0;
761 si.sin_family = AF_INET;
763 [ac_cv_have_icmphdr=yes],
764 [ac_cv_have_icmphdr=no])])
765 if test "$ac_cv_have_icmphdr" = yes ; then
766 AC_DEFINE(HAVE_ICMPHDR)
770 ###############################################################################
772 # Functions to check for various X11 crap.
774 ###############################################################################
776 # Try and find the app-defaults directory.
777 # It sucks that autoconf doesn't do this already...
779 AC_DEFUN([AC_PATH_X_APP_DEFAULTS_XMKMF],[
781 if mkdir conftestdir; then
782 cd conftestdir 2>/dev/null
783 # Make sure to not put "make" in the Imakefile rules, since we grep it out.
784 cat > Imakefile <<'EOF'
786 @echo 'ac_x_app_defaults="${XAPPLOADDIR}"'
788 if (xmkmf) >/dev/null 2>&1 && test -f Makefile; then
789 # GNU make sometimes prints "make[1]: Entering...", which'd confuse us.
790 eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
796 ###############################################################################
798 # Handle the --with-x-app-defaults option HERE
800 ###############################################################################
802 AC_ARG_WITH(x-app-defaults,[],
803 [ac_cv_x_app_defaults="$withval"],
804 [eval ac_x_app_defaults="$withval"])
807 AC_DEFUN([AC_PATH_X_APP_DEFAULTS_DIRECT],[
808 # Look for the directory under a standard set of common directories.
809 # Check X11 before X11Rn because it's often a symlink to the current release.
812 /usr/share/X11/app-defaults \
814 /usr/X11/lib/app-defaults \
815 /usr/X11R6/lib/app-defaults \
816 /usr/X11R6/lib/X11/app-defaults \
817 /usr/X11R5/lib/app-defaults \
818 /usr/X11R5/lib/X11/app-defaults \
819 /usr/X11R4/lib/app-defaults \
820 /usr/X11R4/lib/X11/app-defaults \
822 /usr/lib/X11/app-defaults \
823 /usr/lib/X11R6/app-defaults \
824 /usr/lib/X11R5/app-defaults \
825 /usr/lib/X11R4/app-defaults \
827 /etc/X11/app-defaults \
829 /usr/local/X11/lib/app-defaults \
830 /usr/local/X11R6/lib/app-defaults \
831 /usr/local/X11R5/lib/app-defaults \
832 /usr/local/X11R4/lib/app-defaults \
834 /usr/local/lib/X11/app-defaults \
835 /usr/local/lib/X11R6/app-defaults \
836 /usr/local/lib/X11R6/X11/app-defaults \
837 /usr/local/lib/X11R5/app-defaults \
838 /usr/local/lib/X11R5/X11/app-defaults \
839 /usr/local/lib/X11R4/app-defaults \
840 /usr/local/lib/X11R4/X11/app-defaults \
842 /usr/X386/lib/X11/app-defaults \
843 /usr/x386/lib/X11/app-defaults \
844 /usr/XFree86/lib/X11/app-defaults \
846 /usr/lib/X11/app-defaults \
847 /usr/local/lib/X11/app-defaults \
848 /usr/unsupported/lib/X11/app-defaults \
849 /usr/athena/lib/X11/app-defaults \
850 /usr/local/x11r5/lib/X11/app-defaults \
851 /usr/lpp/Xamples/lib/X11/app-defaults \
852 /lib/usr/lib/X11/app-defaults \
854 /usr/openwin/lib/app-defaults \
855 /usr/openwin/lib/X11/app-defaults \
856 /usr/openwin/share/lib/app-defaults \
857 /usr/openwin/share/lib/X11/app-defaults \
859 /X11R6/lib/app-defaults \
860 /X11R5/lib/app-defaults \
861 /X11R4/lib/app-defaults \
864 if test -d "$ac_dir"; then
865 ac_x_app_defaults=$ac_dir
871 AC_DEFUN([AC_PATH_X_APP_DEFAULTS],
873 AC_CACHE_CHECK([for X app-defaults directory], ac_cv_x_app_defaults,
874 [# skip this, it's always wrong these days.
875 # AC_PATH_X_APP_DEFAULTS_XMKMF
876 if test x"$ac_x_app_defaults" = x; then
877 true AC_PATH_X_APP_DEFAULTS_DIRECT
879 if test x"$ac_x_app_defaults" = x; then
880 /bin/echo -n 'fallback: '
881 ac_cv_x_app_defaults="/usr/lib/X11/app-defaults"
883 # Record where we found app-defaults for the cache.
884 ac_cv_x_app_defaults="$ac_x_app_defaults"
886 eval ac_x_app_defaults="$ac_cv_x_app_defaults"])
889 AC_DEFUN([AC_XPOINTER],
890 [AC_CACHE_CHECK([for XPointer], ac_cv_xpointer,
891 [AC_TRY_X_COMPILE([#include <X11/Xlib.h>],
892 [XPointer foo = (XPointer) 0;],
893 [ac_cv_xpointer=yes],
894 [ac_cv_xpointer=no])])
895 if test "$ac_cv_xpointer" != yes; then
896 AC_DEFINE(XPointer,[char*])
900 # Random special-cases for X on certain pathological OSes.
901 # You know who you are.
903 AC_DEFUN([AC_X_RANDOM_PATHS],
907 # The following arcana was gleaned from conversations with
908 # Eric Schwartz <erics@col.hp.com>:
910 # On HPUX 10.x, the parts of X that HP considers "standard" live in
911 # /usr/{include,lib}/X11R6/. The parts that HP doesn't consider
912 # "standard", notably, Xaw and Xmu, live in /usr/contrib/X11R6/.
913 # Yet /usr/contrib/X11R6/ comes preinstalled on all HPUX systems.
914 # Also, there are symlinks from /usr/include/ and /usr/lib/ into
915 # /usr/{include,lib}/X11R6/, so that (if you don't use Xmu at all)
916 # you don't need any -I or -L arguments.
918 # On HPUX 9.x, /usr/{include,lib}/X11R5/ and /usr/contrib/X11R5/
919 # are the same division as 10.x. However, there are no symlinks to
920 # the X stuff from /usr/include/ and /usr/lib/, so -I and -L
921 # arguments are always necessary.
923 # However, X11R6 was available on HPUX 9.x as a patch: if that
924 # patch was installed, then all of X11R6 went in to
925 # /usr/contrib/X11R6/ (there was no /usr/{include,lib}/X11R6/.)
927 # HPUX 8.x was the same as 9.x, but was X11R4 instead (I don't know
928 # whether R5 was available as a patch; R6 undoubtedly was not.)
930 # So. We try and use the highest numbered pair of
931 # /usr/{include,lib}/X11R?/ and /usr/contrib/X11R?/{include,lib}/
932 # that are available. We do not mix and match different versions
935 # Question I still don't know the answer to: (do you?)
937 # * On HPUX 9.x, where /usr/include/X11R5/ was standard, and
938 # /usr/contrib/X11R6/ could be installed as a patch, what was in
939 # that contrib directory? Did it contain so-called "standard"
940 # X11R6, or did it include Xaw and Xmu as well? If the former,
941 # where did one find Xaw and Xmu on 9.x R6 systems? Would this
942 # be a situation where one had to reach into the R5 headers and
943 # libs to find Xmu? That is, must both R6 and R5 directories
944 # be on the -I and -L lists in that case?
946 for version in X11R6 X11R5 X11R4 ; do
947 # if either pair of directories exists...
948 if test -d /usr/include/$version || test -d /usr/contrib/$version/include
950 # if contrib exists, use it...
951 if test -d /usr/contrib/$version/include ; then
952 X_CFLAGS="$X_CFLAGS -I/usr/contrib/$version/include"
953 X_LIBS="$X_LIBS -L/usr/contrib/$version/lib"
955 # if the "standard" one exists, use it.
956 if test -d /usr/include/$version ; then
957 X_CFLAGS="$X_CFLAGS -I/usr/include/$version"
958 X_LIBS="$X_LIBS -L/usr/lib/$version"
960 # since at least one of the pair exists, go no farther.
965 # Now find Motif. Thanks for not making xmkmf find this by
966 # default, you losers.
968 if test -d /usr/include/Motif2.1 ; then
969 X_CFLAGS="$X_CFLAGS -I/usr/include/Motif2.1"
970 X_LIBS="$X_LIBS -L/usr/lib/Motif2.1"
971 elif test -d /usr/include/Motif1.2 ; then
972 X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.2"
973 X_LIBS="$X_LIBS -L/usr/lib/Motif1.2"
974 elif test -d /usr/include/Motif1.1 ; then
975 X_CFLAGS="$X_CFLAGS -I/usr/include/Motif1.1"
976 X_LIBS="$X_LIBS -L/usr/lib/Motif1.1"
979 # Now let's check for the pseudo-standard locations for OpenGL and XPM.
981 if test -d /opt/graphics/OpenGL/include ; then
982 # HP-UX 10.20 puts it here
983 X_CFLAGS="-I/opt/graphics/OpenGL/include $X_CFLAGS"
984 X_LIBS="-L/opt/graphics/OpenGL/lib $X_LIBS"
985 elif test -d /opt/Mesa/lib ; then
986 X_CFLAGS="-I/opt/Mesa/include $X_CFLAGS"
987 X_LIBS="-L/opt/Mesa/lib $X_LIBS"
991 if test -d /opt/xpm/lib/X11 ; then
992 X_CFLAGS="-I/opt/xpm/include $X_CFLAGS"
993 X_LIBS="-L/opt/xpm/lib/X11 $X_LIBS"
996 # On HPUX, default to installing in /opt/xscreensaver/ instead of
997 # in /usr/local/, unless there is already an xscreensaver in
998 # /usr/local/bin/. This can be overridden with the --prefix arg
999 # to configure. I'm not sure this is the right thing to do, but
1000 # Richard Lloyd says so...
1002 if test \! -x /usr/local/bin/xscreensaver ; then
1003 ac_default_prefix=/opt/xscreensaver
1009 # Thanks for not making xmkmf find this by default, pinheads.
1010 # And thanks for moving things around again, too. Is this
1011 # really the standard location now? What happened to the
1012 # joke that this kind of thing went in /opt?
1013 # cthomp says "answer: CDE (Common Disorganized Environment)"
1015 if test -f /usr/dt/include/Xm/Xm.h ; then
1016 X_CFLAGS="$X_CFLAGS -I/usr/dt/include"
1017 MOTIF_LIBS="$MOTIF_LIBS -L/usr/dt/lib -R/usr/dt/lib"
1019 # Some versions of Slowlaris Motif require -lgen. But not all. Why?
1020 AC_CHECK_LIB(gen, regcmp, [MOTIF_LIBS="$MOTIF_LIBS -lgen"])
1026 # On MacOS X (10.x with "fink"), many things are under /sw/.
1028 if test -d /sw/include ; then
1029 X_CFLAGS="-I/sw/include $X_CFLAGS"
1030 X_LIBS="-L/sw/lib $X_LIBS"
1035 AC_DEFUN([AC_CHECK_GETIFADDRS],
1036 [AC_CACHE_CHECK([for getifaddrs], ac_cv_have_getifaddrs,
1037 [AC_TRY_COMPILE([#include <stdlib.h>
1039 #include <arpa/inet.h>
1040 #include <ifaddrs.h>],
1041 [struct ifaddrs *ifa;
1044 ifa->ifa_addr->sa_family = 0;],
1045 [ac_cv_have_getifaddrs=yes],
1046 [ac_cv_have_getifaddrs=no])])
1047 if test "$ac_cv_have_getifaddrs" = yes ; then
1048 AC_DEFINE(HAVE_GETIFADDRS)
1051 AC_DEFUN([AC_TYPE_SOCKLEN_T],
1052 [AC_CACHE_CHECK([for socklen_t], ac_cv_type_socklen_t,
1053 [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1054 #include <sys/types.h>
1055 #include <sys/socket.h>]], [[
1057 ]])],[ac_cv_type_socklen_t=yes],[ac_cv_type_socklen_t=no])])
1058 if test "$ac_cv_type_socklen_t" != yes; then
1059 AC_DEFINE(socklen_t, int,
1060 [Define to `int' if <sys/types.h> or <sys/socket.h> does not define.])
1063 ###############################################################################
1065 # Some utility functions to make checking for X things easier.
1067 ###############################################################################
1069 # Like AC_CHECK_HEADER, but it uses the already-computed -I directories.
1071 AC_DEFUN([AC_CHECK_X_HEADER], [
1072 ac_save_CPPFLAGS="$CPPFLAGS"
1073 if test \! -z "$includedir" ; then
1074 CPPFLAGS="$CPPFLAGS -I$includedir"
1076 CPPFLAGS="$CPPFLAGS $X_CFLAGS"
1077 CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
1078 AC_CHECK_HEADER([$1],[$2],[$3],[$4])
1079 CPPFLAGS="$ac_save_CPPFLAGS"])
1081 # Like AC_EGREP_HEADER, but it uses the already-computed -I directories.
1083 AC_DEFUN([AC_EGREP_X_HEADER], [
1084 ac_save_CPPFLAGS="$CPPFLAGS"
1085 if test \! -z "$includedir" ; then
1086 CPPFLAGS="$CPPFLAGS -I$includedir"
1088 CPPFLAGS="$CPPFLAGS $X_CFLAGS"
1089 CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
1090 AC_EGREP_HEADER([$1], [$2], [$3], [$4])
1091 CPPFLAGS="$ac_save_CPPFLAGS"])
1093 # Like AC_TRY_COMPILE, but it uses the already-computed -I directories.
1095 AC_DEFUN([AC_TRY_X_COMPILE], [
1096 ac_save_CPPFLAGS="$CPPFLAGS"
1097 if test \! -z "$includedir" ; then
1098 CPPFLAGS="$CPPFLAGS -I$includedir"
1100 CPPFLAGS="$CPPFLAGS $X_CFLAGS"
1101 CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
1102 AC_TRY_COMPILE([$1], [$2], [$3], [$4])
1103 CPPFLAGS="$ac_save_CPPFLAGS"])
1106 # Like AC_CHECK_LIB, but it uses the already-computed -I and -L directories.
1107 # Use this sparingly; it probably doesn't work very well on X programs.
1109 AC_DEFUN([AC_CHECK_X_LIB], [
1110 ac_save_CPPFLAGS="$CPPFLAGS"
1111 ac_save_LDFLAGS="$LDFLAGS"
1112 # ac_save_LIBS="$LIBS"
1114 if test \! -z "$includedir" ; then
1115 CPPFLAGS="$CPPFLAGS -I$includedir"
1117 # note: $X_CFLAGS includes $x_includes
1118 CPPFLAGS="$CPPFLAGS $X_CFLAGS"
1120 if test \! -z "$libdir" ; then
1121 LDFLAGS="$LDFLAGS -L$libdir"
1123 # note: $X_LIBS includes $x_libraries
1124 LDFLAGS="$LDFLAGS $X_LIBS $X_EXTRA_LIBS"
1126 CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
1127 LDFLAGS=`eval eval eval eval eval eval eval eval eval echo $LDFLAGS`
1128 AC_CHECK_LIB([$1], [$2], [$3], [$4], [$5])
1129 CPPFLAGS="$ac_save_CPPFLAGS"
1130 LDFLAGS="$ac_save_LDFLAGS"
1131 # LIBS="$ac_save_LIBS"
1134 # Like AC_TRY_RUN, but it uses the already-computed -I directories.
1135 # (But not the -L directories!)
1137 AC_DEFUN([AC_TRY_X_RUN], [
1138 ac_save_CPPFLAGS="$CPPFLAGS"
1139 if test \! -z "$includedir" ; then
1140 CPPFLAGS="$CPPFLAGS -I$includedir"
1142 CPPFLAGS="$CPPFLAGS $X_CFLAGS"
1143 CPPFLAGS=`eval eval eval eval eval eval eval eval eval echo $CPPFLAGS`
1144 AC_TRY_RUN([$1], [$2], [$3], [$4])
1145 CPPFLAGS="$ac_save_CPPFLAGS"])
1149 # Usage: HANDLE_X_PATH_ARG([variable_name],
1150 # [--command-line-option],
1151 # [descriptive string])
1153 # All of the --with options take three forms:
1155 # --with-foo (or --with-foo=yes)
1156 # --without-foo (or --with-foo=no)
1159 # This function, HANDLE_X_PATH_ARG, deals with the /DIR case. When it sees
1160 # a directory (string beginning with a slash) it checks to see whether
1161 # /DIR/include and /DIR/lib exist, and adds them to $X_CFLAGS and $X_LIBS
1164 AC_DEFUN([HANDLE_X_PATH_ARG], [
1170 AC_MSG_CHECKING([for [$3] headers])
1173 X_CFLAGS="-I$d $X_CFLAGS"
1176 AC_MSG_RESULT(not found ($d: no such directory))
1179 AC_MSG_CHECKING([for [$3] libs])
1182 X_LIBS="-L$d $X_LIBS"
1185 AC_MSG_RESULT(not found ($d: no such directory))
1188 # replace the directory string with "yes".
1195 echo "error: argument to [$2] must be \"yes\", \"no\", or a directory."
1196 echo " If it is a directory, then \`DIR/include' will be added to"
1197 echo " the -I list, and \`DIR/lib' will be added to the -L list."
1205 ###############################################################################
1206 ###############################################################################
1208 # End of function definitions. Now start actually executing stuff.
1210 ###############################################################################
1211 ###############################################################################
1213 # WTF! autoconf emits this *way* too late. Do it earlier.
1214 test "x$prefix" = xNONE && prefix=$ac_default_prefix
1215 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1218 # random compiler setup
1223 AC_PROG_CC_PTHREAD # Needs ac_original_cc.
1226 AC_NO_LONG_STRING_WARNINGS
1227 AC_NO_MISPLACED_DECLARATIONS
1229 AC_NO_CPLUSPLUS_COMMENTS_IN_C_CODE
1236 # stuff for Makefiles
1238 AC_PROG_INSTALL_DIRS
1241 # By default, autoconf sets INSTALL_SCRIPT to '${INSTALL_PROGRAM}'.
1242 # That's wrong: it should be set to '${INSTALL}', so that one can
1243 # implement the "install-strip" target properly (strip executables,
1244 # but do not try to strip scripts.)
1246 INSTALL_SCRIPT='${INSTALL}'
1250 AC_CHECK_HEADERS(unistd.h inttypes.h)
1258 AC_GETTIMEOFDAY_ARGS
1260 AC_CHECK_FUNCS(select fcntl uname nice setpriority getcwd getwd putenv sbrk)
1261 AC_CHECK_FUNCS(sigaction syslog realpath setrlimit)
1262 AC_CHECK_FUNCS(setlocale)
1263 AC_CHECK_FUNCS(getaddrinfo)
1264 AC_CHECK_MEMBERS([struct sockaddr.sa_len],,, [[#include <sys/socket.h>]])
1269 AC_CHECK_HEADERS(crypt.h sys/select.h)
1272 if test -z "$PERL" ; then
1273 # don't let it be blank...
1279 if test "$have_x" != yes; then
1280 AC_MSG_ERROR(Couldn't find X11 headers/libs. Try `$0 --help'.)
1283 AC_PATH_X_APP_DEFAULTS
1287 AC_MSG_CHECKING(whether this is MacOS X)
1294 AC_MSG_RESULT($ac_macosx)
1297 ###############################################################################
1301 ###############################################################################
1304 GETTEXT_PACKAGE=xscreensaver
1305 AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE",
1306 [This is the name of the gettext package to use.])
1307 AC_DEFINE_UNQUOTED(PACKAGE, "$GETTEXT_PACKAGE",
1308 [This is the same as GETTEXT_PACKAGE, but for the glade
1310 AC_SUBST(GETTEXT_PACKAGE)
1312 ALL_LINGUAS="ca da de es et fi fr hu it ja ko nb nl pl pt pt_BR ru sk sv vi wa zh_CN zh_TW"
1314 MKINSTALLDIRS="$INSTALL_DIRS"
1317 ###############################################################################
1319 # Check for -lXmu (some fucked up vendors don't ship it...)
1321 ###############################################################################
1324 AC_CHECK_X_HEADER(X11/Xmu/Error.h, [have_xmu=yes],,
1325 [#include <stdlib.h>
1327 #include <X11/Intrinsic.h>])
1328 if test "$have_xmu" = no ; then
1329 XMU_SRCS='$(UTILS_SRC)/xmu.c'
1330 XMU_OBJS='$(UTILS_BIN)/xmu.o'
1340 ###############################################################################
1342 # Check for the SunOS 4.1.x _get_wmShellWidgetClass bug.
1343 # See comp.windows.x FAQ question 124. The right fix is to
1344 # get OpenWindows 3.0 patches 100512-02 and 100573-03.
1346 ###############################################################################
1348 if test "$have_xmu" = yes ; then
1351 AC_CACHE_CHECK([for the SunOS 4.1.x _get_wmShellWidgetClass bug],
1352 ac_cv_sunos_xmu_bug,
1353 [ac_save_LDFLAGS="$LDFLAGS"
1354 if test \! -z "$x_libraries" ; then
1355 LDFLAGS="$LDFLAGS -L$x_libraries"
1357 # Note: this trick never works! (Generally.)
1358 # We're only getting away with using AC_TRY_LINK
1359 # with X libraries because we know it's SunOS.
1360 LDFLAGS="$LDFLAGS -lXmu -lXt -lX11 -lXext -lm"
1362 [ac_cv_sunos_xmu_bug=no],
1363 [ac_cv_sunos_xmu_bug=yes])
1364 LDFLAGS="$ac_save_LDFLAGS"])
1365 if test "$ac_cv_sunos_xmu_bug" = yes ; then
1366 AC_CACHE_CHECK([whether the compiler understands -static],
1368 [ac_save_LDFLAGS="$LDFLAGS"
1369 LDFLAGS="$LDFLAGS -static"
1370 AC_TRY_LINK(,,[ac_cv_ld_static=yes],[ac_cv_ld_static=no])
1371 LDFLAGS="$ac_save_LDFLAGS"])
1372 if test "$ac_cv_ld_static" = yes ; then
1373 LDFLAGS="$LDFLAGS -static"
1375 LDFLAGS="$LDFLAGS -Bstatic"
1383 ###############################################################################
1385 # Handle the --with-hackdir option
1387 ###############################################################################
1390 with_hackdir_req=unspecified
1391 AC_ARG_WITH(hackdir,[
1393 Installation options:
1394 --with-hackdir=DIR Where to install the hundreds of demo executables.
1395 Default: `PREFIX/libexec/xscreensaver/'],
1396 [with_hackdir="$withval"; with_hackdir_req="$withval"],[with_hackdir=yes])
1398 if test x"$with_hackdir" = xyes; then
1399 HACKDIR='${libexecdir}/xscreensaver'
1400 elif test x"$with_hackdir" = xno; then
1403 HACKDIR=$with_hackdir
1406 # canonicalize slashes.
1407 HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
1409 # Expand HACKDIR as HACKDIR_FULL
1410 HACKDIR_FULL=`eval eval eval eval eval eval eval eval eval echo $HACKDIR`
1412 # This option used to be called --enable-subdir; make sure that is no longer
1413 # used, since configure brain-damagedly ignores unknown --enable options.
1416 AC_ARG_ENABLE(subdir,,[obsolete_enable=yes])
1417 if test -n "$obsolete_enable"; then
1418 echo "error: the --enable-subdir option has been replaced with"
1419 echo " the new --with-hackdir option; see \`configure --help'"
1420 echo " for more information."
1425 ###############################################################################
1427 # Handle the --with-configdir option
1428 # Help for --with-x-app-defaults option added.
1430 ###############################################################################
1433 with_configdir_req=unspecified
1434 AC_ARG_WITH(configdir,
1435 [ --with-configdir=DIR Where to install the data files that describe each
1436 of the display modes to the GUI.
1437 Default: `PREFIX/share/xscreensaver/config/'
1438 --with-x-app-defaults=DIR
1439 Where to install xscreensaver configuration file.
1441 [with_configdir="$withval"; with_configdir_req="$withval"],
1442 [with_configdir=yes])
1444 if test x"$with_configdir" = xyes; then
1445 HACK_CONF_DIR='${datadir}/xscreensaver/config'
1446 elif test x"$with_configdir" = xno; then
1447 echo "error: must be yes, or a pathname: --with-configdir=$with_configdir"
1450 # there must be a better way than this...
1451 if test -z "`echo $with_configdir | sed 's@^/.*@@'`" ; then
1453 HACK_CONF_DIR=$with_configdir
1456 HACK_CONF_DIR="\${exec_prefix}$with_configdir"
1463 ###############################################################################
1465 # Check for the SGI SCREEN_SAVER server extension.
1467 ###############################################################################
1470 #with_sgi_req=unspecified
1471 #AC_ARG_WITH(sgi-ext,
1472 #[Except where noted, all of the --with options below can also take a
1473 #directory argument: for example, `--with-motif=/opt/Motif'. That would
1474 #cause /opt/Motif/include/ to be added to the -I list, and /opt/Motif/lib/
1475 #to be added to the -L list, assuming those directories exist.
1477 #By default, support for each of these options will be built in, if the
1478 #relevant library routines exist. At run time, they will then be used
1479 #only if the X server being used supports them. Each --with option has
1480 #a corresponding --without option, to override building support for them
1483 #Screen blanking and idle-detection options:
1485 # --with-sgi-ext Include support for the SGI SCREEN_SAVER extension.],
1486 # [with_sgi="$withval"; with_sgi_req="$withval"],[with_sgi=yes])
1488 #HANDLE_X_PATH_ARG(with_sgi, --with-sgi-ext, SGI SCREEN_SAVER)
1490 #if test "$with_sgi" = yes; then
1491 # AC_CHECK_X_HEADER(X11/extensions/XScreenSaver.h,
1493 # AC_DEFINE(HAVE_SGI_SAVER_EXTENSION)],,
1494 # [#include <X11/Xlib.h>])
1496 #elif test "$with_sgi" != no; then
1497 # echo "error: must be yes or no: --with-sgi-ext=$with_sgi"
1502 ###############################################################################
1504 # Check for the XIDLE server extension.
1506 ###############################################################################
1509 #with_xidle_req=unspecified
1510 #AC_ARG_WITH(xidle-ext,
1511 #[ --with-xidle-ext Include support for the XIDLE extension.],
1512 # [with_xidle="$withval"; with_xidle_req="$withval"],[with_xidle=yes])
1514 #HANDLE_X_PATH_ARG(with_xidle, --with-xidle-ext, XIDLE)
1516 #if test "$with_xidle" = yes; then
1517 # AC_CHECK_X_HEADER(X11/extensions/xidle.h,
1519 # AC_DEFINE(HAVE_XIDLE_EXTENSION)],,
1520 # [#include <X11/Xlib.h>])
1521 #elif test "$with_xidle" != no; then
1522 # echo "error: must be yes or no: --with-xidle-ext=$with_xidle"
1527 ###############################################################################
1529 # Check for the SGI-VIDEO-CONTROL server extension.
1531 ###############################################################################
1534 #with_sgivc_req=unspecified
1535 #AC_ARG_WITH(sgivc-ext,
1536 #[ --with-sgivc-ext Include support for the SGI-VIDEO-CONTROL extension.],
1537 # [with_sgivc="$withval"; with_sgivc_req="$withval"],[with_sgivc=yes])
1539 #HANDLE_X_PATH_ARG(with_sgivc, --with-sgivc-ext, SGI-VIDEO-CONTROL)
1541 #if test "$with_sgivc" = yes; then
1543 # # first check for XSGIvc.h
1544 # AC_CHECK_X_HEADER(X11/extensions/XSGIvc.h, [have_sgivc=yes],,
1545 # [#include <X11/Xlib.h>])
1547 # # if that succeeded, then check for the -lXsgivc
1548 # if test "$have_sgivc" = yes; then
1550 # AC_CHECK_X_LIB(Xsgivc, XSGIvcQueryGammaMap,
1551 # [have_sgivc=yes; SAVER_LIBS="$SAVER_LIBS -lXsgivc"], [true],
1555 # # if that succeeded, then we've really got it.
1556 # if test "$have_sgivc" = yes; then
1557 # AC_DEFINE(HAVE_SGI_VC_EXTENSION)
1560 #elif test "$with_sgivc" != no; then
1561 # echo "error: must be yes or no: --with-sgivc-ext=$with_sgivc"
1566 ###############################################################################
1568 # Check for the DPMS server extension.
1570 ###############################################################################
1573 with_dpms_req=unspecified
1574 AC_ARG_WITH(dpms-ext,
1575 [ --with-dpms-ext Include support for the DPMS extension.],
1576 [with_dpms="$withval"; with_dpms_req="$withval"],[with_dpms=yes])
1578 HANDLE_X_PATH_ARG(with_dpms, --with-dpms-ext, DPMS)
1580 if test "$with_dpms" = yes; then
1582 # first check for dpms.h
1583 AC_CHECK_X_HEADER(X11/extensions/dpms.h, [have_dpms=yes],,
1584 [#include <X11/Xlib.h>
1585 #include <X11/Xmd.h>])
1587 # if that succeeded, then check for the DPMS code in the libraries
1588 if test "$have_dpms" = yes; then
1590 # first look in -lXext (this is where it is with XFree86 4.0)
1592 AC_CHECK_X_LIB(Xext, DPMSInfo, [have_dpms=yes], [true], -lXext -lX11)
1594 # if that failed, look in -lXdpms (this is where it was in XFree86 3.x)
1595 if test "$have_dpms" = no; then
1596 AC_CHECK_X_LIB(Xdpms, DPMSInfo,
1597 [have_dpms=yes; XDPMS_LIBS="-lXdpms"], [true],
1603 # if that succeeded, then we've really got it.
1604 if test "$have_dpms" = yes; then
1605 AC_DEFINE(HAVE_DPMS_EXTENSION)
1608 elif test "$with_dpms" != no; then
1609 echo "error: must be yes or no: --with-dpms-ext=$with_dpms"
1614 ###############################################################################
1616 # Check for the XINERAMA server extension.
1618 ###############################################################################
1621 with_xinerama_req=unspecified
1622 AC_ARG_WITH(xinerama-ext,
1623 [ --with-xinerama-ext Include support for the XINERAMA extension.],
1624 [with_xinerama="$withval"; with_xinerama_req="$withval"],[with_xinerama=yes])
1626 HANDLE_X_PATH_ARG(with_xinerama, --with-xinerama-ext, XINERAMA)
1628 if test "$with_xinerama" = yes; then
1630 # first check for Xinerama.h
1631 AC_CHECK_X_HEADER(X11/extensions/Xinerama.h, [have_xinerama=yes],,
1632 [#include <X11/Xlib.h>])
1634 # if that succeeded, then check for the XINERAMA code in the libraries
1635 if test "$have_xinerama" = yes; then
1637 # first look in -lXext
1639 AC_CHECK_X_LIB(Xext, XineramaQueryScreens, [have_xinerama=yes], [true],
1642 # if that failed, look in -lXinerama (this is where it is in XFree86 4.1.)
1643 if test "$have_xinerama" = no; then
1644 AC_CHECK_X_LIB(Xinerama, XineramaQueryScreens,
1645 [have_xinerama=yes; XINERAMA_LIBS="-lXinerama"],
1646 [true], -lXext -lX11)
1650 # if that succeeded, then we've really got it.
1651 if test "$have_xinerama" = yes; then
1652 AC_DEFINE(HAVE_XINERAMA)
1655 elif test "$with_xinerama" != no; then
1656 echo "error: must be yes or no: --with-xinerama-ext=$with_xinerama"
1661 ###############################################################################
1663 # Check for the XINPUT server extension.
1665 ###############################################################################
1668 with_xinput_req=unspecified
1669 AC_ARG_WITH(xinput-ext,
1670 [ --with-xinput-ext Include support for the XInput extension.],
1671 [with_xinput="$withval"; with_xinput_req="$withval"], [with_xinput=yes])
1673 HANDLE_X_PATH_ARG(with_xinput, --with-xinput-ext, XINPUT)
1675 if test "$with_xinput" = yes; then
1677 # first check for Xinput.h
1678 AC_CHECK_X_HEADER(X11/extensions/XInput.h, [have_xinput=yes],,
1679 [#include <X11/Xlib.h>])
1681 # if that succeeded, then check for libXi
1682 if test "$have_xinput" = yes; then
1684 AC_CHECK_X_LIB(Xi, XListInputDevices,
1685 [have_xinput=yes; SAVER_LIBS="$SAVER_LIBS -lXi"],
1686 [true], -lXext -lX11)
1689 # if that succeeded, then we've really got it.
1690 if test "$have_xinput" = yes; then
1691 AC_DEFINE(HAVE_XINPUT)
1694 elif test "$with_xinput" != no; then
1695 echo "error: must be yes or no: --with-xinput-ext=$with_xinput"
1700 ###############################################################################
1702 # Check for the XF86VMODE server extension (for virtual screens.)
1704 ###############################################################################
1707 with_xf86vmode_req=unspecified
1708 AC_ARG_WITH(xf86vmode-ext,
1709 [ --with-xf86vmode-ext Include support for XFree86 virtual screens.],
1710 [with_xf86vmode="$withval"; with_xf86vmode_req="$withval"],
1711 [with_xf86vmode=yes])
1713 HANDLE_X_PATH_ARG(with_xf86vmode, --with-xf86vmode-ext, xf86vmode)
1717 if test "$with_xf86vmode" = yes; then
1719 # first check for xf86vmode.h
1720 AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86vmode=yes],,
1721 [#include <X11/Xlib.h>])
1723 # if that succeeded, then check for the -lXxf86vm
1724 if test "$have_xf86vmode" = yes; then
1726 AC_CHECK_X_LIB(Xxf86vm, XF86VidModeGetViewPort,
1727 [have_xf86vmode=yes;
1728 VIDMODE_LIBS="-lXxf86vm";
1729 SAVER_LIBS="$SAVER_LIBS $VIDMODE_LIBS"],
1730 [true], -lXext -lX11)
1733 # if that succeeded, then we've really got it.
1734 if test "$have_xf86vmode" = yes; then
1735 AC_DEFINE(HAVE_XF86VMODE)
1738 elif test "$with_xf86vmode" != no; then
1739 echo "error: must be yes or no: --with-xf86vmode-ext=$with_xf86vmode"
1744 ###############################################################################
1746 # Check for the XF86VMODE server extension (for gamma fading.)
1748 ###############################################################################
1751 have_xf86gamma_ramp=no
1752 with_xf86gamma_req=unspecified
1753 AC_ARG_WITH(xf86gamma-ext,
1754 [ --with-xf86gamma-ext Include support for XFree86 gamma fading.],
1755 [with_xf86gamma="$withval"; with_xf86gamma_req="$withval"],
1756 [with_xf86gamma=yes])
1758 HANDLE_X_PATH_ARG(with_xf86gamma, --with-xf86gamma-ext, xf86gamma)
1760 if test "$with_xf86gamma" = yes; then
1762 # first check for xf86vmode.h, if we haven't already
1763 if test "$have_xf86vmode" = yes; then
1766 AC_CHECK_X_HEADER(X11/extensions/xf86vmode.h, [have_xf86gamma=yes],,
1767 [#include <X11/Xlib.h>])
1770 # if that succeeded, then check for the -lXxf86vm
1771 if test "$have_xf86gamma" = yes; then
1773 AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGamma,
1774 [have_xf86gamma=yes],
1775 [true], -lXext -lX11)
1778 # check for the Ramp versions of the functions too.
1779 if test "$have_xf86gamma" = yes; then
1780 have_xf86gamma_ramp=no
1781 AC_CHECK_X_LIB(Xxf86vm, XF86VidModeSetGammaRamp,
1782 [have_xf86gamma_ramp=yes],
1783 [true], -lXext -lX11)
1786 # if those tests succeeded, then we've really got the functions.
1787 if test "$have_xf86gamma" = yes; then
1788 AC_DEFINE(HAVE_XF86VMODE_GAMMA)
1791 if test "$have_xf86gamma_ramp" = yes; then
1792 AC_DEFINE(HAVE_XF86VMODE_GAMMA_RAMP)
1795 # pull in the lib, if we haven't already
1796 if test "$have_xf86gamma" = yes -a "$have_xf86vmode" = no; then
1797 SAVER_LIBS="$SAVER_LIBS -lXxf86vm"
1800 elif test "$with_xf86gamma" != no; then
1801 echo "error: must be yes or no: --with-xf86gamma-ext=$with_xf86vmode"
1806 ###############################################################################
1808 # Check for the RANDR (Resize and Rotate) server extension.
1810 # We need this to detect when the resolution of the desktop
1811 # has changed out from under us (this is a newer, different
1812 # mechanism than the XF86VMODE virtual viewports.)
1814 ###############################################################################
1817 with_randr_req=unspecified
1818 AC_ARG_WITH(randr-ext,
1819 [ --with-randr-ext Include support for the X Resize+Rotate extension.],
1820 [with_randr="$withval"; with_randr_req="$withval"],[with_randr=yes])
1822 HANDLE_X_PATH_ARG(with_randr, --with-randr-ext, RANDR)
1824 if test "$with_randr" = yes; then
1826 # first check for Xrandr.h
1827 AC_CHECK_X_HEADER(X11/extensions/Xrandr.h, [have_randr=yes],,
1828 [#include <X11/Xlib.h>])
1830 # if that succeeded, then check for the XRR code in the libraries
1831 if test "$have_randr" = yes; then
1833 # RANDR probably needs -lXrender
1835 AC_CHECK_X_LIB(Xrender, XRenderSetSubpixelOrder,
1836 [xrender_libs="-lXrender"], [true], -lXext -lX11)
1838 # first look for RANDR in -lXext
1840 AC_CHECK_X_LIB(Xext, XRRGetScreenInfo,
1841 [have_randr=yes; SAVER_LIBS="$SAVER_LIBS $xrender_libs"],
1842 [true], $xrender_libs -lXext -lX11)
1844 # if that failed, look in -lXrandr
1845 if test "$have_randr" = no; then
1846 AC_CHECK_X_LIB(Xrandr, XRRGetScreenInfo,
1847 [have_randr=yes; SAVER_LIBS="$SAVER_LIBS -lXrandr $xrender_libs"],
1848 [true], $xrender_libs -lXext -lX11)
1852 # if that succeeded, then we've really got it.
1853 if test "$have_randr" = yes; then
1854 AC_DEFINE(HAVE_RANDR)
1856 # Now check for version 1.2 in the same libs.
1857 # Try to compile, since on MacOS 10.5.7, headers are older than libs!
1858 AC_CACHE_CHECK([for XRRGetScreenResources], ac_cv_randr_12,
1860 AC_TRY_X_COMPILE([#include <stdlib.h>
1861 #include <X11/Xlib.h>
1862 #include <X11/extensions/Xrandr.h>],
1863 [XRRScreenResources *res =
1864 XRRGetScreenResources (0, 0);],
1865 [ac_cv_randr_12=yes],
1866 [ac_cv_randr_12=no])])
1867 if test "$ac_cv_randr_12" = yes ; then
1868 AC_DEFINE(HAVE_RANDR_12)
1870 # AC_CHECK_X_LIB(c, XRRGetOutputInfo, [AC_DEFINE(HAVE_RANDR_12)],
1871 # [true], $SAVER_LIBS)
1875 elif test "$with_randr" != no; then
1876 echo "error: must be yes or no: --with-randr-ext=$with_randr"
1881 ###############################################################################
1883 # Check for XF86MiscSetGrabKeysState (but only bother if we are already
1884 # using other XF86 stuff.)
1886 ###############################################################################
1888 have_xf86miscsetgrabkeysstate=no
1889 if test "$have_xf86gamma" = yes -o "$have_xf86vmode" = yes; then
1890 AC_CHECK_X_LIB(Xxf86misc, XF86MiscSetGrabKeysState,
1891 [have_xf86miscsetgrabkeysstate=yes],
1892 [true], -lXext -lX11)
1893 if test "$have_xf86miscsetgrabkeysstate" = yes ; then
1894 SAVER_LIBS="$SAVER_LIBS -lXxf86misc"
1895 AC_DEFINE(HAVE_XF86MISCSETGRABKEYSSTATE)
1900 ###############################################################################
1902 # Check for HP XHPDisableReset and XHPEnableReset.
1904 ###############################################################################
1906 AC_MSG_CHECKING([for XHPDisableReset in X11/XHPlib.h])
1907 AC_EGREP_X_HEADER(XHPDisableReset, X11/XHPlib.h,
1908 [AC_DEFINE(HAVE_XHPDISABLERESET)
1909 SAVER_LIBS="-lXhp11 $SAVER_LIBS"
1910 AC_MSG_RESULT(yes)],
1911 [AC_MSG_RESULT(no)])
1914 ###############################################################################
1916 # Check for /proc/interrupts.
1918 ###############################################################################
1920 have_proc_interrupts=no
1921 with_proc_interrupts_req=unspecified
1922 AC_ARG_WITH(proc-interrupts,
1923 [ --with-proc-interrupts Include support for consulting the /proc/interrupts
1924 file to notice keyboard activity.],
1925 [with_proc_interrupts="$withval"; with_proc_interrupts_req="$withval"],
1926 [with_proc_interrupts=yes])
1928 if test "$with_proc_interrupts" = yes; then
1930 # Note that we may be building in an environment (e.g. Debian buildd chroot)
1931 # without a proper /proc filesystem. If /proc/interrupts exists, then we'll
1932 # check that it has the bits we need, but otherwise we'll just go on faith.
1934 have_proc_interrupts=yes
1936 if test -f /proc/interrupts; then
1937 AC_CACHE_CHECK([whether /proc/interrupts contains keyboard data],
1938 ac_cv_have_proc_interrupts,
1939 [ac_cv_have_proc_interrupts=no
1940 if grep 'keyboard\|i8042' /proc/interrupts >/dev/null 2>&1 ; then
1941 ac_cv_have_proc_interrupts=yes
1944 have_proc_interrupts=$ac_cv_have_proc_interrupts
1947 if test "$have_proc_interrupts" = yes; then
1948 AC_DEFINE(HAVE_PROC_INTERRUPTS)
1951 elif test "$with_proc_interrupts" != no; then
1952 echo "error: must be yes or no: --with-proc-interrupts=$with_proc_interrupts"
1957 ###############################################################################
1959 # The --enable-locking option
1961 ###############################################################################
1963 AC_ARG_ENABLE(locking,[Screen locking options:
1964 --enable-locking Compile in support for locking the display.
1965 --disable-locking Do not allow locking at all.],
1966 [enable_locking="$enableval"],
1967 [if test "$ac_macosx" = yes; then
1968 # We can't lock on MacOS X, so default to not compiling in support for it.
1969 # But allow --enable-locking to override that, so I can debug Linux locking
1975 if test "$enable_locking" = yes; then
1977 elif test "$enable_locking" = no; then
1978 AC_DEFINE(NO_LOCKING)
1980 echo "error: must be yes or no: --enable-locking=$enable_locking"
1985 ###############################################################################
1987 # Whether to allow root password to unblank.
1989 ###############################################################################
1990 AC_ARG_ENABLE(root-passwd, [
1991 --enable-root-passwd Allow root passwd to unlock screen.
1992 --disable-root-passwd Do not allow that.],
1993 [enable_root_passwd="$enableval"],[enable_root_passwd=yes])
1994 if test "$enable_root_passwd" = yes; then
1995 AC_DEFINE(ALLOW_ROOT_PASSWD)
1997 elif test "$enable_root_passwd" != no; then
1998 echo "error: must be yes or no: --enable-root-passwd=$enable_root_passwd"
2002 ###############################################################################
2006 ###############################################################################
2010 # Solaris systems tend to come with PAM misconfigured.
2011 # Don't build it by default, even if the headers exist.
2015 # Default to building PAM support on all other systems, if it exists.
2016 with_pam_default=yes
2021 with_pam_req=unspecified
2024 [ --with-pam Include support for PAM (Pluggable Auth Modules.)],
2025 [with_pam="$withval"; with_pam_req="$withval"],[with_pam=$with_pam_default])
2027 AC_ARG_WITH([pam_service_name],
2028 AC_HELP_STRING([--with-pam-service-name],
2029 [NAME arg is the name of the PAM service that
2030 xscreensaver will authenticate as.]),
2031 [pam_service_name="$withval"],[pam_service_name="xscreensaver"])
2033 AC_ARG_ENABLE(pam-check-account-type,
2034 [AC_HELP_STRING([--enable-pam-check-account-type],
2035 [Whether PAM should check the result of account
2036 modules when authenticating. Only do this if you
2037 have account configured properly on your system.])],
2038 [enable_pam_check_account_type="$enableval"],[enable_pam_check_account_type=no])
2039 if test "$enable_pam_check_account_type" = yes ; then
2040 AC_DEFINE(PAM_CHECK_ACCOUNT_TYPE)
2042 elif test "$enable_pam_check_account_type" != no ; then
2043 echo "error: must be yes or no: --enable-pam-check-account-type=$enable_pam_check_account_type"
2047 HANDLE_X_PATH_ARG(with_pam, --with-pam, PAM)
2049 if test "$enable_locking" = yes -a "$with_pam" = yes; then
2050 AC_CACHE_CHECK([for PAM], ac_cv_pam,
2051 [AC_TRY_X_COMPILE([#include <security/pam_appl.h>],,
2054 if test "$ac_cv_pam" = yes ; then
2057 AC_DEFINE_UNQUOTED(PAM_SERVICE_NAME,"$pam_service_name")
2059 PASSWD_LIBS="${PASSWD_LIBS} -lpam"
2061 # libpam typically requires dlopen and dlsym. On FreeBSD,
2062 # those are in libc. On Linux and Solaris, they're in libdl.
2063 AC_CHECK_LIB(dl, dlopen, [PASSWD_LIBS="${PASSWD_LIBS} -ldl"])
2065 # On Linux, sigtimedwait() is in libc; on Solaris, it's in librt.
2067 AC_CHECK_LIB(c, sigtimedwait,
2069 AC_DEFINE(HAVE_SIGTIMEDWAIT)])
2070 if test "$have_timedwait" = no ; then
2071 AC_CHECK_LIB(rt, sigtimedwait, [have_timedwait=yes
2072 AC_DEFINE(HAVE_SIGTIMEDWAIT)
2073 PASSWD_LIBS="${PASSWD_LIBS} -lrt"])
2076 AC_MSG_CHECKING(how to call pam_strerror)
2077 AC_CACHE_VAL(ac_cv_pam_strerror_args,
2078 [AC_TRY_X_COMPILE([#include <stdio.h>
2080 #include <security/pam_appl.h>],
2081 [pam_handle_t *pamh = 0;
2082 char *s = pam_strerror(pamh, PAM_SUCCESS);],
2083 [ac_pam_strerror_args=2],
2084 [AC_TRY_X_COMPILE([#include <stdio.h>
2086 #include <security/pam_appl.h>],
2088 pam_strerror(PAM_SUCCESS);],
2089 [ac_pam_strerror_args=1],
2090 [ac_pam_strerror_args=0])])
2091 ac_cv_pam_strerror_args=$ac_pam_strerror_args])
2092 ac_pam_strerror_args=$ac_cv_pam_strerror_args
2093 if test "$ac_pam_strerror_args" = 1 ; then
2094 AC_MSG_RESULT(one argument)
2095 elif test "$ac_pam_strerror_args" = 2 ; then
2096 AC_DEFINE(PAM_STRERROR_TWO_ARGS)
2097 AC_MSG_RESULT(two arguments)
2099 AC_MSG_RESULT(unknown)
2102 # Check pam_fail_delay
2103 AC_MSG_CHECKING(pam_fail_delay in -lpam)
2104 AC_CACHE_VAL(ac_cv_pam_fail_delay,
2105 [ac_save_LDFLAGS="$LDFLAGS"
2107 AC_TRY_LINK([#include <security/pam_appl.h>],
2108 [pam_handle_t *pamh = 0;
2109 unsigned int usec = 1;
2110 int status = pam_fail_delay (pamh, usec);],
2111 [ac_pam_fail_delay=yes],
2112 [ac_pam_fail_delay=no])
2113 ac_cv_pam_fail_delay=$ac_pam_fail_delay,
2114 LDFLAGS=$ac_save_LDFLAGS])
2116 if test "$ac_pam_fail_delay" = yes ; then
2118 AC_DEFINE(HAVE_PAM_FAIL_DELAY)
2127 ###############################################################################
2129 # Check for Kerberos.
2131 ###############################################################################
2135 with_kerberos_req=unspecified
2137 AC_ARG_WITH(kerberos,
2138 [ --with-kerberos Include support for Kerberos authentication.],
2139 [with_kerberos="$withval"; with_kerberos_req="$withval"],[with_kerberos=yes])
2141 HANDLE_X_PATH_ARG(with_kerberos, --with-kerberos, Kerberos)
2143 if test "$enable_locking" = yes -a "$with_kerberos" = yes; then
2144 AC_CACHE_CHECK([for Kerberos 4], ac_cv_kerberos,
2145 [AC_TRY_X_COMPILE([#include <krb.h>],,
2146 [ac_cv_kerberos=yes],
2147 [ac_cv_kerberos=no])])
2148 AC_CACHE_CHECK([for Kerberos 5], ac_cv_kerberos5,
2149 [AC_TRY_X_COMPILE([#include <kerberosIV/krb.h>],,
2150 [ac_cv_kerberos5=yes],
2151 [ac_cv_kerberos5=no])])
2153 if test "$ac_cv_kerberos" = yes ; then
2155 AC_DEFINE(HAVE_KERBEROS)
2158 if test "$ac_cv_kerberos5" = yes ; then
2160 # Andrew Snare <ajs@pigpond.com> wrote:
2162 # You were assuming that if kerberosV (krb5) was found, then kerberosIV
2163 # (krb4) was also available. This turns out not to be the case with
2164 # mit-krb-1.2.7; apparently backwards-compatibility with KerberosIV
2167 # So, disable kerberosV support if libkrb4 can't be found.
2168 # This is not the best solution, but it makes the compile not fail.
2170 AC_CHECK_X_LIB(krb4, krb_get_tf_realm,
2171 [have_kerberos=yes],
2173 if test "$have_kerberos" = yes ; then
2175 AC_DEFINE(HAVE_KERBEROS)
2176 AC_DEFINE(HAVE_KERBEROS5)
2179 AC_MSG_WARN([Cannot find compat lib (libkrb4) needed to use Kerberos 5])
2184 if test "$have_kerberos5" = yes ; then
2185 # from Matt Knopp <mhat@infocalypse.netlag.com>
2186 # (who got it from amu@mit.edu)
2188 PASSWD_LIBS="$PASSWD_LIBS -lkrb4 -ldes425 -lkrb5 -lk5crypto -lcom_err"
2190 # jwz: MacOS X uses -lkrb5, but not -lcrypt
2191 AC_CHECK_X_LIB(crypt, crypt, [PASSWD_LIBS="$PASSWD_LIBS -lcrypt"])
2193 elif test "$have_kerberos" = yes ; then
2194 # from Tim Showalter <tjs@psaux.com> for FreeBSD 4.2
2195 PASSWD_LIBS="$PASSWD_LIBS -lkrb -ldes -lcom_err"
2198 if test "$have_kerberos" = yes ; then
2199 AC_CHECK_FUNC(res_search,,
2200 AC_CHECK_LIB(resolv,res_search,PASSWD_LIBS="${PASSWD_LIBS} -lresolv",
2201 AC_MSG_WARN([Can't find DNS resolver libraries needed for Kerberos])
2207 ###############################################################################
2209 # Check for the nine billion variants of shadow passwords...
2211 ###############################################################################
2216 with_shadow_req=unspecified
2219 [ --with-shadow Include support for shadow password authentication.],
2220 [with_shadow="$withval"; with_shadow_req="$withval"],[with_shadow=yes])
2222 HANDLE_X_PATH_ARG(with_shadow, --with-shadow, shadow password)
2224 if test "$enable_locking" = no ; then
2230 ###############################################################################
2232 # Check for Sun "adjunct" passwords.
2234 ###############################################################################
2236 if test "$with_shadow" = yes ; then
2237 AC_CACHE_CHECK([for Sun-style shadow passwords], ac_cv_sun_adjunct,
2238 [AC_TRY_X_COMPILE([#include <stdlib.h>
2240 #include <sys/types.h>
2241 #include <sys/label.h>
2242 #include <sys/audit.h>
2243 #include <pwdadj.h>],
2244 [struct passwd_adjunct *p = getpwanam("nobody");
2245 const char *pw = p->pwa_passwd;],
2246 [ac_cv_sun_adjunct=yes],
2247 [ac_cv_sun_adjunct=no])])
2248 if test "$ac_cv_sun_adjunct" = yes; then
2249 have_shadow_adjunct=yes
2256 ###############################################################################
2258 # Check for DEC and SCO so-called "enhanced" security.
2260 ###############################################################################
2262 if test "$with_shadow" = yes ; then
2263 AC_CACHE_CHECK([for DEC-style shadow passwords], ac_cv_enhanced_passwd,
2264 [AC_TRY_X_COMPILE([#include <stdlib.h>
2266 #include <sys/types.h>
2268 #include <sys/security.h>
2270 [struct pr_passwd *p;
2272 set_auth_parameters(0, 0);
2273 check_auth_parameters();
2274 p = getprpwnam("nobody");
2275 pw = p->ufld.fd_encrypt;],
2276 [ac_cv_enhanced_passwd=yes],
2277 [ac_cv_enhanced_passwd=no])])
2278 if test $ac_cv_enhanced_passwd = yes; then
2279 have_shadow_enhanced=yes
2283 # On SCO, getprpwnam() is in -lprot (which uses nap() from -lx)
2284 # (I'm told it needs -lcurses too, but I don't understand why.)
2285 # But on DEC, it's in -lsecurity.
2287 AC_CHECK_LIB(prot, getprpwnam,
2288 [PASSWD_LIBS="$PASSWD_LIBS -lprot -lcurses -lx"],
2289 [AC_CHECK_LIB(security, getprpwnam,
2290 [PASSWD_LIBS="$PASSWD_LIBS -lsecurity"])],
2295 ###############################################################################
2297 # Check for HP's entry in the "Not Invented Here" Sweepstakes.
2299 ###############################################################################
2301 if test "$with_shadow" = yes ; then
2302 AC_CACHE_CHECK([for HP-style shadow passwords], ac_cv_hpux_passwd,
2303 [AC_TRY_X_COMPILE([#include <stdlib.h>
2305 #include <sys/types.h>
2307 #include <hpsecurity.h>
2309 [struct s_passwd *p = getspwnam("nobody");
2310 const char *pw = p->pw_passwd;],
2311 [ac_cv_hpux_passwd=yes],
2312 [ac_cv_hpux_passwd=no])])
2313 if test "$ac_cv_hpux_passwd" = yes; then
2314 have_shadow_hpux=yes
2318 # on HPUX, bigcrypt is in -lsec
2319 AC_CHECK_LIB(sec, bigcrypt, [PASSWD_LIBS="$PASSWD_LIBS -lsec"])
2324 ###############################################################################
2326 # Check for FreeBSD-style shadow passwords.
2328 # On FreeBSD, getpwnam() and friends work just like on non-shadow-
2329 # password systems -- except you only get stuff in the pw_passwd field
2330 # if the running program is setuid. So, guess that we've got this
2331 # lossage to contend with if /etc/master.passwd exists, and default to
2332 # a setuid installation.
2334 ###############################################################################
2336 if test "$with_shadow" = yes ; then
2337 AC_CACHE_CHECK([for FreeBSD-style shadow passwords], ac_cv_master_passwd,
2338 [if test -f /etc/master.passwd ; then
2339 ac_cv_master_passwd=yes
2341 ac_cv_master_passwd=no
2343 if test "$ac_cv_master_passwd" = yes; then
2349 ###############################################################################
2351 # Check for traditional (ha!) shadow passwords.
2353 ###############################################################################
2355 if test "$with_shadow" = yes ; then
2356 AC_CACHE_CHECK([for generic shadow passwords], ac_cv_shadow,
2357 [AC_TRY_X_COMPILE([#include <stdlib.h>
2359 #include <sys/types.h>
2361 #include <shadow.h>],
2362 [struct spwd *p = getspnam("nobody");
2363 const char *pw = p->sp_pwdp;],
2365 [ac_cv_shadow=no])])
2366 if test "$ac_cv_shadow" = yes; then
2370 # On some systems (UnixWare 2.1), getspnam() is in -lgen instead of -lc.
2372 AC_CHECK_LIB(c, getspnam, [have_getspnam=yes])
2373 if test "$have_getspnam" = no ; then
2374 AC_CHECK_LIB(gen, getspnam,
2375 [have_getspnam=yes; PASSWD_LIBS="$PASSWD_LIBS -lgen"])
2381 ###############################################################################
2383 # Check for other libraries needed for non-shadow passwords.
2385 ###############################################################################
2387 if test "$enable_locking" = yes ; then
2389 # On some systems (UnixWare 2.1), crypt() is in -lcrypt instead of -lc.
2391 AC_CHECK_LIB(c, crypt, [have_crypt=yes])
2392 if test "$have_crypt" = no ; then
2393 AC_CHECK_LIB(crypt, crypt,
2394 [have_crypt=yes; PASSWD_LIBS="$PASSWD_LIBS -lcrypt"])
2399 # Most of the above shadow mechanisms will have set need_setuid to yes,
2400 # if they were found. But, on some systems, we need setuid even when
2401 # using plain old vanilla passwords.
2403 if test "$enable_locking" = yes ; then
2405 *-hpux* | *-aix* | *-netbsd* | *-freebsd* | *-openbsd* )
2412 if test "$have_shadow_adjunct" = yes ; then
2413 AC_DEFINE(HAVE_ADJUNCT_PASSWD)
2414 elif test "$have_shadow_enhanced" = yes ; then
2415 AC_DEFINE(HAVE_ENHANCED_PASSWD)
2416 elif test "$have_shadow_hpux" = yes ; then
2417 AC_DEFINE(HAVE_HPUX_PASSWD)
2418 elif test "$have_shadow" = yes ; then
2419 AC_DEFINE(HAVE_SHADOW_PASSWD)
2423 ###############################################################################
2425 # Check for external password helper
2426 # On SuSE, instead of having xscreensaver be a setuid program, they
2427 # fork an external program that takes the password on stdin, and
2428 # returns true if that password is a valid one. Then only that
2429 # smaller program needs to be setuid.
2431 # (Note that this external program is not a GUI: the GUI is still
2432 # all in xscreensaver itself; the external program just does auth.)
2434 ###############################################################################
2436 have_passwd_helper=no
2437 with_passwd_helper_req=unspecified
2439 AC_ARG_WITH(passwd-helper,
2440 [ --with-passwd-helper Include support for an external password
2441 verification helper program.],
2442 [with_passwd_helper="$withval"; with_passwd_helper_req="$withval"],[with_passwd_helper=no])
2443 # no HANDLE_X_PATH_ARG for this one
2445 if test "$enable_locking" = no ; then
2446 with_passwd_helper_req=no
2447 with_passwd_helper=no
2450 case "$with_passwd_helper" in
2453 AC_DEFINE_UNQUOTED(PASSWD_HELPER_PROGRAM, "$with_passwd_helper")
2454 have_passwd_helper=yes;;
2456 echo "error: --with-passwd-helper needs full pathname of helper (not '$with_passwd_helper')." >&2
2461 ###############################################################################
2463 # Check for a login manager for a "New Login" button on the lock dialog.
2464 # Usually this will be "/usr/bin/gdmflexiserver".
2466 ###############################################################################
2468 with_login_manager_req=unspecified
2469 default_login_manager_1='gdmflexiserver -ls'
2470 default_login_manager_2='kdmctl reserve'
2471 default_login_manager_3='lxdm -c USER_SWITCH'
2472 default_login_manager_4='dm-tool switch-to-greeter'
2474 AC_ARG_WITH(login-manager,
2475 [ --with-login-manager Put a "New Login" button on the unlock dialog that
2476 runs a login manager like gdmflexiserver or kdmctl.],
2477 [with_login_manager="$withval"; with_login_manager_req="$withval"],
2478 [with_login_manager=yes])
2479 # no HANDLE_X_PATH_ARG for this one
2481 if test "$enable_locking" = no ; then
2482 with_login_manager_req=no
2483 with_login_manager=no
2486 case "$with_login_manager_req" in
2488 with_login_manager=""
2492 # Try various defaults, use the first one that exists.
2494 with_login_manager=""
2496 if test -z "$with_login_manager" ; then
2497 set dummy $default_login_manager_1 ; login_manager_tmp=$2
2498 unset ac_cv_path_login_manager_tmp # don't cache
2499 AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
2500 if test ! -z "$login_manager_tmp" ; then
2501 with_login_manager="$default_login_manager_1"
2505 if test -z "$with_login_manager" ; then
2506 set dummy $default_login_manager_2 ; login_manager_tmp=$2
2507 unset ac_cv_path_login_manager_tmp # don't cache
2508 AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
2509 if test ! -z "$login_manager_tmp" ; then
2510 with_login_manager="$default_login_manager_2"
2514 if test -z "$with_login_manager" ; then
2515 set dummy $default_login_manager_3 ; login_manager_tmp=$2
2516 unset ac_cv_path_login_manager_tmp # don't cache
2517 AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
2518 if test ! -z "$login_manager_tmp" ; then
2519 with_login_manager="$default_login_manager_3"
2523 if test -z "$with_login_manager" ; then
2524 set dummy $default_login_manager_4 ; login_manager_tmp=$2
2525 unset ac_cv_path_login_manager_tmp # don't cache
2526 AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
2527 if test ! -z "$login_manager_tmp" ; then
2528 with_login_manager="$default_login_manager_4"
2535 # absolute path specified on cmd line
2536 set dummy $with_login_manager_req ; login_manager_tmp=$2
2537 AC_MSG_CHECKING([for $login_manager_tmp])
2538 if test -x "$login_manager_tmp" ; then
2542 with_login_manager=""
2547 # relative path specified on cmd line
2548 set dummy $with_login_manager_req ; login_manager_tmp=$2
2549 unset ac_cv_path_login_manager_tmp # don't cache
2550 AC_PATH_PROG(login_manager_tmp, $login_manager_tmp, [])
2551 if test -z "$login_manager_tmp" ; then
2552 with_login_manager=""
2554 with_login_manager="$login_manager_tmp"
2558 ac_cv_login_manager_program="$with_login_manager"
2560 NEW_LOGIN_COMMAND_P=''
2561 NEW_LOGIN_COMMAND="$ac_cv_login_manager_program"
2563 AC_MSG_CHECKING(for login manager)
2564 if test -z "$NEW_LOGIN_COMMAND" ; then
2565 NEW_LOGIN_COMMAND="$default_login_manager_1"
2566 NEW_LOGIN_COMMAND_P='! '
2567 AC_MSG_RESULT($NEW_LOGIN_COMMAND (disabled))
2569 AC_MSG_RESULT($NEW_LOGIN_COMMAND)
2573 ###############################################################################
2575 # Check for -lgtk (and Gnome stuff)
2577 ###############################################################################
2580 with_gtk_req=unspecified
2582 User interface options:
2584 --with-gtk Use the Gtk toolkit for the user interface.],
2585 [with_gtk="$withval"; with_gtk_req="$withval"],[with_gtk=yes])
2587 # if --with-gtk=/directory/ was specified, remember that directory so that
2588 # we can also look for the `gtk-config' program in that directory.
2598 HANDLE_X_PATH_ARG(with_gtk, --with-gtk, Gtk)
2600 if test "$with_gtk" != yes -a "$with_gtk" != no ; then
2601 echo "error: must be yes or no: --with-gtk=$with_gtk"
2606 parse_gtk_version_string() {
2609 maj=`echo $ac_gtk_version_string | sed -n 's/\..*//p'`
2610 min=`echo $ac_gtk_version_string | sed -n 's/[^.]*\.\([^.]*\).*/\1/p'`
2612 ac_gtk_version=`echo "$maj * 1000 + $min" | bc`
2613 if test -z "$ac_gtk_version"; then
2614 ac_gtk_version=unknown
2615 ac_gtk_version_string=unknown
2619 # Find pkg-config... (need this for both gtk and gdk_pixbuf.)
2620 # if the user specified --with-gtk=/foo/ then look there.
2623 if test ! -z "$gtk_dir"; then
2624 # canonicalize slashes.
2625 foo=`echo "${gtk_dir}/bin" | sed 's@//*@/@g'`
2626 gtk_path="$foo:$gtk_path"
2629 AC_PATH_PROGS(pkg_config, pkg-config,, $gtk_path)
2631 if test -z "$pkg_config" ; then
2632 AC_MSG_WARN([pkg-config not found!])
2637 # Utility function for running pkg-config-based tests...
2640 pkg_check_version() {
2641 if test "$ok" = yes ; then
2644 AC_MSG_CHECKING(for $req)
2645 if $pkg_config --exists "$req" ; then
2646 vers=`$pkg_config --modversion "$req"`
2647 if $pkg_config --exists "$req >= $min" ; then
2648 AC_MSG_RESULT($vers)
2652 AC_MSG_RESULT($vers (wanted >= $min))
2667 have_gtk_2_22_or_higher=no
2668 COMMENT_DEMO_GLADE2_GTK_2_22_HEAD=""
2669 COMMENT_DEMO_GLADE2_GTK_2_22_TAIL=""
2671 if test "$with_gtk" = yes; then
2675 pkg_check_version gtk+-2.0 2.0.1 ; ac_gtk_version_string="$vers"
2676 pkg_check_version gmodule-2.0 2.0.0
2677 pkg_check_version libxml-2.0 2.4.6
2678 pkg_check_version libglade-2.0 1.99.0
2679 pkg_check_version gdk-pixbuf-2.0 2.0.0
2680 pkg_check_version gdk-pixbuf-xlib-2.0 2.0.0
2683 if test "$have_gtk" = no; then
2684 if test -n "$ac_gtk_version_string" ; then
2685 gtk_halfassed="$ac_gtk_version_string"
2686 gtk_halfassed_lib="$req"
2690 if test "$have_gtk" = yes; then
2691 parse_gtk_version_string
2695 if test "$have_gtk" = yes; then
2696 AC_CACHE_CHECK([for Gtk includes], ac_cv_gtk_config_cflags,
2697 [ac_cv_gtk_config_cflags=`$pkg_config --cflags $pkgs`])
2698 AC_CACHE_CHECK([for Gtk libs], ac_cv_gtk_config_libs,
2699 [ac_cv_gtk_config_libs=`$pkg_config --libs $pkgs`])
2702 ac_gtk_config_cflags=$ac_cv_gtk_config_cflags
2703 ac_gtk_config_libs=$ac_cv_gtk_config_libs
2707 if test "$have_gtk" = yes; then
2708 GTK_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
2709 GTK_DATADIR="$GTK_DATADIR/share"
2712 if test "$have_gtk" = yes; then
2713 INCLUDES="$INCLUDES $ac_gtk_config_cflags"
2714 GTK_LIBS="$GTK_LIBS $ac_gtk_config_libs"
2716 AC_DEFINE(HAVE_GTK2)
2720 if test "$have_gtk" = yes; then
2722 pkg_check_version gtk+-2.0 2.22
2723 have_gtk_2_22_or_higher="$ok"
2724 if test "$have_gtk_2_22_or_higher" = yes; then
2725 COMMENT_DEMO_GLADE2_GTK_2_22_HEAD="<!-- comment>"
2726 COMMENT_DEMO_GLADE2_GTK_2_22_TAIL="</comment -->"
2732 # Check for the various Gnome help and URL loading programs.
2734 WITH_BROWSER=gnome-open
2735 if test "$have_gtk" = yes; then
2736 AC_CHECK_PROGS(gnome_open_program, gnome-open)
2737 AC_CHECK_PROGS(gnome_url_show_program, gnome-url-show)
2741 ###############################################################################
2745 ###############################################################################
2748 with_motif_req=unspecified
2749 AC_ARG_WITH(motif,[ --with-motif Use the Motif toolkit for the user interface
2750 (no longer supported.)],
2751 [with_motif="$withval"; with_motif_req="$withval"],[with_motif=no])
2753 HANDLE_X_PATH_ARG(with_motif, --with-motif, Motif)
2755 if test "$with_motif" != yes -a "$with_motif" != no ; then
2756 echo "error: must be yes or no: --with-motif=$with_motif"
2760 if test "$with_motif" = yes; then
2762 AC_CHECK_X_HEADER(Xm/Xm.h,
2764 AC_DEFINE(HAVE_MOTIF)
2765 MOTIF_LIBS="$MOTIF_LIBS -lXm"],,
2766 [#include <stdlib.h>
2768 #include <X11/Intrinsic.h>])
2772 if test "$have_motif" = yes; then
2773 AC_CHECK_X_HEADER(Xm/ComboBox.h, [AC_DEFINE(HAVE_XMCOMBOBOX)],,
2774 [#include <stdlib.h>
2776 #include <X11/Intrinsic.h>])
2780 ###############################################################################
2782 # Checking whether Motif is really Lesstif.
2784 ###############################################################################
2787 if test "$have_motif" = yes ; then
2788 AC_CACHE_CHECK([whether Motif is really LessTif],
2790 [AC_TRY_X_COMPILE([#include <Xm/Xm.h>],
2791 [long vers = LesstifVersion;],
2792 [ac_cv_have_lesstif=yes],
2793 [ac_cv_have_lesstif=no])])
2794 have_lesstif=$ac_cv_have_lesstif
2798 lesstif_version=unknown
2799 lesstif_version_string=unknown
2801 if test "$have_lesstif" = yes ; then
2803 echo unknown > conftest-lt
2804 AC_CACHE_CHECK([LessTif version number],
2805 ac_cv_lesstif_version_string,
2806 [AC_TRY_X_RUN([#include <stdio.h>
2809 FILE *f = fopen("conftest-lt", "w");
2811 fprintf(f, "%d %d.%d\n", LesstifVersion,
2812 LESSTIF_VERSION, LESSTIF_REVISION);
2816 [ltv=`cat conftest-lt`
2817 ac_cv_lesstif_version=`echo $ltv | sed 's/ .*//'`
2818 ac_cv_lesstif_version_string=`echo $ltv | sed 's/.* //'`],
2819 [ac_cv_lesstif_version=unknown
2820 ac_cv_lesstif_version_string=unknown],
2821 [ac_cv_lesstif_version=unknown
2822 ac_cv_lesstif_version_string=unknown])])
2824 lesstif_version=$ac_cv_lesstif_version
2825 lesstif_version_string=$ac_cv_lesstif_version_string
2830 if test "$have_motif" = yes ; then
2832 echo unknown > conftest-mt
2833 AC_CACHE_CHECK([Motif version number],
2834 ac_cv_motif_version_string,
2835 [AC_TRY_X_RUN([#include <stdio.h>
2838 FILE *f = fopen("conftest-mt", "w");
2840 fprintf(f, "%d %d.%d\n", XmVersion,
2841 XmVERSION, XmREVISION);
2845 [mtv=`cat conftest-mt`
2846 ac_cv_motif_version=`echo $mtv | sed 's/ .*//'`
2847 ac_cv_motif_version_string=`echo $mtv | sed 's/.* //'`],
2848 [ac_cv_motif_version=unknown
2849 ac_cv_motif_version_string=unknown],
2850 [ac_cv_motif_version=unknown
2851 ac_cv_motif_version_string=unknown])])
2853 motif_version=$ac_cv_motif_version
2854 motif_version_string=$ac_cv_motif_version_string
2859 ###############################################################################
2861 # Checking whether Motif requires -lXpm.
2863 # If this is Motif 2.x, and we have XPM, then link against XPM as well.
2864 # The deal is, Motif 2.x requires XPM -- but it's a compilation option
2865 # of the library whether to build the XPM code into libXm, or whether
2866 # to rely on an external libXm. So the only way to tell whether XPM is
2867 # a link-time requirement is to examine libXm.a, which is very
2868 # difficult to do in an autoconf script. So... if it's Motif 2.x, we
2869 # always link against XPM if the XPM lib exists (and this will be a
2870 # no-op if libXm happens to already have the XPM code in it.)
2872 ###############################################################################
2874 motif_requires_xpm=no
2875 if test "$have_motif" = yes ; then
2876 AC_MSG_CHECKING(whether Motif requires XPM)
2877 if test "$motif_version" = "unknown" || test "$motif_version" -ge 2000
2879 motif_requires_xpm=yes
2880 AC_MSG_RESULT(maybe)
2887 ###############################################################################
2889 # Checking whether Motif requires -lXp.
2891 # Some versions of Motif (2.1.0, at least) require -lXp, the "X Printing
2892 # Extension". Why this extension isn't in -lXext with all the others,
2895 ###############################################################################
2898 if test "$have_motif" = yes ; then
2900 AC_CHECK_X_LIB(Xp, XpQueryExtension,
2901 [have_xp_ext=yes; MOTIF_LIBS="$MOTIF_LIBS -lXp"],
2902 [true], -lX11 -lXext -lm)
2906 ###############################################################################
2908 # Checking whether Motif requires -lXintl (for _Xsetlocale.)
2910 ###############################################################################
2913 if test "$have_motif" = yes ; then
2914 AC_CHECK_X_LIB(Xintl, _Xsetlocale, [have_xintl=yes], [have_xintl=no],
2916 if test "$have_xintl" = yes; then
2917 MOTIF_LIBS="$MOTIF_LIBS -lXintl"
2922 ###############################################################################
2924 # Check for -lGL or -lMesaGL.
2926 ###############################################################################
2930 with_gl_req=unspecified
2935 --with-gl Build those demos which depend on OpenGL.],
2936 [with_gl="$withval"; with_gl_req="$withval"],[with_gl=yes])
2938 HANDLE_X_PATH_ARG(with_gl, --with-gl, GL)
2940 ac_mesagl_version=unknown
2941 ac_mesagl_version_string=unknown
2943 if test "$with_gl" = yes; then
2944 AC_CHECK_X_HEADER(GL/gl.h, have_gl=yes, have_gl=no)
2945 if test "$have_gl" = yes ; then
2946 AC_CHECK_X_HEADER(GL/glx.h, have_gl=yes, have_gl=no,
2947 [#include <GL/gl.h>])
2950 # If we have the headers, try and figure out which vendor it's from.
2952 if test "$have_gl" = yes ; then
2954 # We need to know whether it's MesaGL so that we know which libraries
2957 AC_CACHE_CHECK([whether GL is really MesaGL], ac_cv_have_mesa_gl,
2958 [ac_cv_have_mesa_gl=no
2959 if test "$ac_macosx" = no; then
2960 # WTF! MacOS 10.5.0 ships the Mesa GL headers!
2961 # It's not really Mesa, is it?
2962 AC_EGREP_X_HEADER(Mesa|MESA, GL/glx.h, [ac_cv_have_mesa_gl=yes])
2964 ac_have_mesa_gl=$ac_cv_have_mesa_gl
2969 if test "$ac_macosx" = yes; then
2971 # Without these, every link against libGL gets a bunch of useless
2974 osx_crud="-bind_at_load -multiply_defined suppress"
2975 AC_MSG_RESULT(adding "$osx_crud" to GL_LIBS)
2976 GL_LIBS="$GL_LIBS $osx_crud"
2979 # New lossage in 10.5.0: without this, we get:
2980 # ld: cycle in dylib re-exports with /usr/X11/lib/libGL.dylib
2982 osx_crud="/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib"
2983 osx_crud="-Wl,-dylib_file,${osx_crud}:${osx_crud}"
2985 AC_MSG_RESULT(adding "$osx_crud" to GL_LIBS)
2986 GL_LIBS="$GL_LIBS $osx_crud"
2989 # New lossage in 10.6.8: we can't allow -L/opt/local/lib to be in the
2990 # link line, or at runtime XQueryExtension gets a segv due to some kind
2991 # of library version skew. Libs must come from /usr/X11/lib even if
2992 # $prefix and/or $exec_prefix are set to /opt/local/.
2994 AC_MSG_RESULT(omitting "$libdir" from LDFLAGS)
3000 # Some versions of MesaGL are compiled to require -lpthread.
3001 # So if the Mesa headers exist, and -lpthread exists, then always
3002 # link -lpthread after the Mesa libs (be they named -lGL or -lMesaGL.)
3004 # Oftentimes, AX_PTHREAD will bring in -lpthread as well; but that ends
3005 # up before -l(Mesa)GL, instead of after where it would belong.
3007 if test "$ac_have_mesa_gl" = yes; then
3008 AC_CHECK_LIB(pthread, pthread_create, [GL_LIBS="-lpthread"], [],)
3012 # If we have Mesa headers, check to see if we can link against -lMesaGL.
3013 # If we don't have Mesa headers, or we don't have -lMesaGL, try -lGL.
3014 # Else, warn that GL is busted. (We have the headers, but no libs.)
3017 if test "$ac_have_mesa_gl" = yes ; then
3018 AC_CHECK_X_LIB(MesaGL, glXCreateContext,
3020 GL_LIBS="-lMesaGL -lMesaGLU $VIDMODE_LIBS $GL_LIBS"],
3021 [], -lMesaGLU $GL_LIBS -lX11 -lXext $VIDMODE_LIBS -lm)
3024 if test "$gl_lib_1" = "" ; then
3025 AC_CHECK_X_LIB(GL, glXCreateContext,
3027 GL_LIBS="-lGL -lGLU $VIDMODE_LIBS $GL_LIBS"],
3028 [], -lGLU $GL_LIBS -lX11 -lXext $VIDMODE_LIBS -lm)
3031 if test "$gl_lib_1" = "" ; then
3032 # we have headers, but no libs -- bail.
3037 # linking works -- we can build the GL hacks.
3039 if test "$ac_have_mesa_gl" = yes ; then
3040 AC_DEFINE(HAVE_MESA_GL)
3046 # Now that we know we have GL headers and libs, do some more GL testing.
3049 if test "$have_gl" = yes ; then
3050 # If it's MesaGL, we'd like to issue a warning if the version number
3051 # is less than or equal to 2.6, because that version had a security bug.
3053 if test "$ac_have_mesa_gl" = yes; then
3055 AC_CACHE_CHECK([MesaGL version number], ac_cv_mesagl_version_string,
3056 [cat > conftest.$ac_ext <<EOF
3057 #line __oline__ "configure"
3058 #include "confdefs.h"
3060 #ifndef MESA_MAJOR_VERSION
3061 # include <GL/xmesa.h>
3062 # ifdef XMESA_MAJOR_VERSION
3063 /* Around Mesa 3.2, they took out the Mesa version number, so instead,
3064 we have to check the XMesa version number (the number of the X protocol
3065 support, which seems to be the same as the Mesa version number.)
3067 # define MESA_MAJOR_VERSION XMESA_MAJOR_VERSION
3068 # define MESA_MINOR_VERSION XMESA_MINOR_VERSION
3070 /* Oh great. Some time after 3.4, they took out the xmesa.h header file,
3071 so we have no way of telling what version of Mesa this is at all.
3072 So, we'll guess that the osmesa version (the "offscreen protocol")
3073 is less than or equal to the real mesa version number. Except that
3074 if OSmesa is 3.3, assume at least Mesa 3.4, since OSmesa was 3.3 in
3075 Mesa 3.4. And Mesa 3.3 had xmesa.h. What a complete load of shit!
3077 # include <GL/osmesa.h>
3078 # define MESA_MAJOR_VERSION OSMESA_MAJOR_VERSION
3079 # define MESA_MINOR_VERSION OSMESA_MINOR_VERSION or newer, probably?
3080 # if OSMESA_MAJOR_VERSION == 3 && OSMESA_MINOR_VERSION == 3
3081 # undef MESA_MINOR_VERSION
3082 # define MESA_MINOR_VERSION 4 or newer, probably?
3086 configure: MESA_MAJOR_VERSION MESA_MINOR_VERSION
3089 ac_save_CPPFLAGS="$CPPFLAGS"
3090 if test \! -z "$includedir" ; then
3091 CPPFLAGS="$CPPFLAGS -I$includedir"
3093 CPPFLAGS="$CPPFLAGS $X_CFLAGS"
3095 mglv=`(eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC | grep configure:`
3099 mglv=`echo "$mglv" | sed -n \
3100 's/^configure: *\([0-9][0-9]*\) *\([0-9].*\)$/\1.\2/p'`
3103 rm -f conftest.$ac_ext
3105 CPPFLAGS="$ac_save_CPPFLAGS"
3107 if test "$mglv" = ""; then
3108 ac_mesagl_version=unknown
3109 ac_mesagl_version_string=unknown
3111 ac_mesagl_version_string="$mglv"
3114 maj=`echo "$mglv" | sed -n 's/^\([0-9][0-9]*\)\..*$/\1/p'`
3115 min=`echo "$mglv" | sed -n 's/^.*\.\([0-9][0-9]*\).*$/\1/p'`
3117 ac_mesagl_version=`echo "$maj * 1000 + $min" | bc`
3118 if test -z "$ac_mesagl_version"; then
3119 ac_mesagl_version=unknown
3120 ac_mesagl_version_string=unknown
3123 ac_cv_mesagl_version=$ac_mesagl_version
3124 ac_cv_mesagl_version_string=$ac_mesagl_version_string
3126 ac_mesagl_version=$ac_cv_mesagl_version
3127 ac_mesagl_version_string=$ac_cv_mesagl_version_string
3131 # Check for OpenGL 1.1 features.
3133 AC_CHECK_X_LIB($gl_lib_1, glBindTexture, [AC_DEFINE(HAVE_GLBINDTEXTURE)],
3134 [true], $GL_LIBS -lX11 -lXext -lm)
3137 elif test "$with_gl" != no; then
3138 echo "error: must be yes or no: --with-gl=$with_gl"
3143 ###############################################################################
3147 ###############################################################################
3150 with_gle_req=unspecified
3153 [ --with-gle Build those demos which depend on GLE
3154 (the OpenGL "extrusion" library.)],
3155 [with_gle="$withval"; with_gle_req="$withval"],[with_gle=yes])
3157 HANDLE_X_PATH_ARG(with_gle, --with-gle, GLE)
3161 if test "$have_gl" = no ; then
3163 elif test "$with_gle" = yes; then
3165 AC_CHECK_X_HEADER(GL/gle.h, have_gle3=yes, have_gle3=no,
3166 [#include <GL/gl.h>])
3167 if test "$have_gle3" = yes ; then
3170 AC_CHECK_X_HEADER(GL/gutil.h, have_gle=yes, have_gle=no,
3171 [#include <GL/gl.h>])
3172 if test "$have_gle" = yes ; then
3173 AC_CHECK_X_HEADER(GL/tube.h, have_gle=yes, have_gle=no,
3174 [#include <GL/gl.h>])
3178 if test "$have_gle" = yes ; then
3181 AC_CHECK_X_LIB(gle, gleCreateGC,
3182 [have_gle=yes; gle_halfassed=no; GLE_LIBS="-lgle"],
3183 [], $GL_LIBS -lX11 -lXext -lm)
3185 if test "$have_gle" = yes ; then
3189 # sometimes the libmatrix stuff is included in libgle. look there first.
3191 # I don't get it. For some reason, this test passes on SGI, as if
3192 # uview_direction_d() was in libgle -- but it's not, it's in libmatrix.
3193 # Yet the link is succeeding. Why???
3195 # AC_CHECK_X_LIB(gle, uview_direction_d,
3196 # [have_gle=yes; gle_halfassed=no],
3197 # [], $GL_LIBS -lX11 -lXext -lm)
3199 # As of GLE 3 this is in libgle, and has changed name to uview_direction!
3201 if test "$have_gle3" = yes ; then
3202 AC_CHECK_X_LIB(gle, uview_direction,
3203 [have_gle=yes; gle_halfassed=no],
3204 [], $GL_LIBS -lX11 -lXext -lm)
3206 # if it wasn't in libgle, then look in libmatrix.
3207 if test "$have_gle" = no ; then
3208 AC_CHECK_X_LIB(matrix, uview_direction_d,
3209 [have_gle=yes; gle_halfassed=no;
3210 GLE_LIBS="$GLE_LIBS -lmatrix"],
3211 [], $GL_LIBS -lX11 -lXext -lm)
3215 if test "$have_gle" = yes ; then
3217 if test "$have_gle3" = yes ; then
3218 AC_DEFINE(HAVE_GLE3)
3222 elif test "$with_gle" != no; then
3223 echo "error: must be yes or no: --with-gle=$with_gle"
3229 ###############################################################################
3231 # Handle --with-gles
3233 ###############################################################################
3235 with_gles_req=unspecified
3237 [ --with-gles Target OpenGL ES 1.x API instead of OpenGL 1.3.],
3238 [with_gles="$withval"; with_gles_req="$withval"],[with_gles=no])
3240 HANDLE_X_PATH_ARG(with_gles, --with-gles, JWZGLES)
3242 if test "$with_gles" = yes; then
3244 AC_DEFINE(HAVE_JWZGLES)
3245 JWZGLES_OBJS='$(JWXYZ_BIN)/jwzgles.o'
3246 AC_MSG_RESULT(using OpenGL ES compatiblity shim)
3247 elif test "$with_gles" != no; then
3248 echo "error: must be yes or no: --with-gles=$with_xpm"
3252 ###############################################################################
3254 # Check for -lgdk_pixbuf.
3255 # These tests are for gdk_pixbuf usage of the hacks,
3256 # not xscreensaver-demo (thus we have to test again to get
3257 # the libraries right: don't want to pull in all of GTK
3260 ###############################################################################
3263 with_gdk_pixbuf_req=unspecified
3265 [ --with-pixbuf Include support for the GDK-Pixbuf library in some
3266 demos, which will make it possible for them to read
3267 GIF, JPEG, and PNG files as well.],
3268 [with_gdk_pixbuf="$withval"; with_gdk_pixbuf_req="$withval"],
3269 [with_gdk_pixbuf=yes])
3271 # if --with-pixbuf=/directory/ was specified, remember that directory so that
3272 # we can also look for the `gdk-pixbuf-config' program in that directory.
3273 case "$with_gdk_pixbuf" in
3275 gdk_pixbuf_dir="$with_gdk_pixbuf"
3282 HANDLE_X_PATH_ARG(with_gdk_pixbuf, --with-pixbuf, GDK_PIXBUF)
3284 if test "$with_gdk_pixbuf" != yes -a "$with_gdk_pixbuf" != no ; then
3285 echo "error: must be yes or no: --with-pixbuf=$with_gdk_pixbuf"
3289 if test "$with_gdk_pixbuf" = yes; then
3295 pkg_check_version gdk-pixbuf-2.0 2.0.0
3296 pkg_check_version gdk-pixbuf-xlib-2.0 2.0.0
3297 have_gdk_pixbuf="$ok"
3299 if test "$have_gdk_pixbuf" = yes; then
3300 AC_CACHE_CHECK([for gdk-pixbuf includes], ac_cv_gdk_pixbuf_config_cflags,
3301 [ac_cv_gdk_pixbuf_config_cflags=`$pkg_config --cflags $pkgs`])
3302 AC_CACHE_CHECK([for gdk-pixbuf libs], ac_cv_gdk_pixbuf_config_libs,
3303 [ac_cv_gdk_pixbuf_config_libs=`$pkg_config --libs $pkgs`])
3306 ac_gdk_pixbuf_config_cflags=$ac_cv_gdk_pixbuf_config_cflags
3307 ac_gdk_pixbuf_config_libs=$ac_cv_gdk_pixbuf_config_libs
3310 if test "$have_gdk_pixbuf" = yes; then
3312 # we appear to have pixbuf; check for headers/libs to be sure.
3314 ac_save_gdk_pixbuf_CPPFLAGS="$CPPFLAGS"
3315 CPPFLAGS="$CPPFLAGS $ac_gdk_pixbuf_config_cflags"
3319 # check for header A...
3320 AC_CHECK_X_HEADER(gdk-pixbuf/gdk-pixbuf.h, [have_gdk_pixbuf=yes])
3322 # if that worked, check for header B...
3323 if test "$have_gdk_pixbuf" = yes; then
3325 gdk_pixbuf_halfassed=yes
3326 AC_CHECK_X_HEADER(gdk-pixbuf/gdk-pixbuf-xlib.h,
3327 [have_gdk_pixbuf=yes
3328 gdk_pixbuf_halfassed=no])
3330 # yay, it has a new name in Gtk 2.x...
3331 if test "$have_gdk_pixbuf" = no; then
3333 gdk_pixbuf_halfassed=yes
3334 AC_CHECK_X_HEADER(gdk-pixbuf-xlib/gdk-pixbuf-xlib.h,
3335 [have_gdk_pixbuf=yes
3336 gdk_pixbuf_halfassed=no])
3339 CPPFLAGS="$ac_save_gdk_pixbuf_CPPFLAGS"
3342 if test "$have_gdk_pixbuf" = yes; then
3343 # we have the headers, now check for the libraries
3345 gdk_pixbuf_halfassed=yes
3347 AC_MSG_RESULT(checking for gdk_pixbuf usability...)
3350 AC_CHECK_X_LIB(c, gdk_pixbuf_new_from_file, [have_gdk_pixbuf=yes],,
3351 $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
3353 if test "$have_gdk_pixbuf" = yes; then
3355 AC_CHECK_X_LIB(c, gdk_pixbuf_xlib_init,
3356 [have_gdk_pixbuf=yes
3357 gdk_pixbuf_halfassed=no],,
3358 $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
3362 if test "$have_gdk_pixbuf" = yes; then
3363 INCLUDES="$INCLUDES $ac_gdk_pixbuf_config_cflags"
3364 XPM_LIBS="$ac_gdk_pixbuf_config_libs"
3365 AC_DEFINE(HAVE_GDK_PIXBUF)
3367 AC_MSG_RESULT(checking for gdk_pixbuf usability... no)
3370 if test "$have_gdk_pixbuf" = yes; then
3371 AC_CHECK_X_LIB(c, gdk_pixbuf_apply_embedded_orientation,
3372 [AC_DEFINE(HAVE_GDK_PIXBUF_APPLY_EMBEDDED_ORIENTATION)],,
3373 $ac_gdk_pixbuf_config_libs -lX11 -lXext -lm)
3378 ###############################################################################
3382 ###############################################################################
3385 with_xpm_req=unspecified
3387 [ --with-xpm Include support for XPM files in some demos.
3388 (Not needed if Pixbuf is used.)],
3389 [with_xpm="$withval"; with_xpm_req="$withval"],[with_xpm=yes])
3391 HANDLE_X_PATH_ARG(with_xpm, --with-xpm, XPM)
3393 if test "$with_xpm" = yes; then
3394 AC_CHECK_X_HEADER(X11/xpm.h,
3397 XPM_LIBS="-lXpm $XPM_LIBS"],,
3398 [#include <X11/Xlib.h>])
3399 elif test "$with_xpm" != no; then
3400 echo "error: must be yes or no: --with-xpm=$with_xpm"
3404 # See comment near $motif_requires_xpm, above.
3405 # Need to do this here, after both Motif and XPM have been checked for.
3407 if test "$have_motif" = yes -a "$have_xpm" = yes ; then
3408 if test "$motif_requires_xpm" = yes ; then
3409 MOTIF_LIBS="$MOTIF_LIBS $XPM_LIBS"
3413 if test "$XPM_LIBS" = "" ; then
3418 ###############################################################################
3422 ###############################################################################
3425 with_jpeg_req=unspecified
3428 [ --with-jpeg Include support for the JPEG library.],
3429 [with_jpeg="$withval"; with_jpeg_req="$withval"],
3432 HANDLE_X_PATH_ARG(with_jpeg, --with-jpeg, JPEG)
3434 if test "$with_jpeg" != yes -a "$with_jpeg" != no ; then
3435 echo "error: must be yes or no: --with-jpeg=$with_jpeg"
3439 if test "$with_jpeg" = yes; then
3442 AC_CHECK_X_HEADER(jpeglib.h, [have_jpeg=yes])
3444 if test "$have_jpeg" = yes; then
3445 # we have the header, now check for the library
3448 AC_CHECK_X_LIB(jpeg, jpeg_start_compress,
3452 AC_DEFINE(HAVE_JPEGLIB)])
3457 ###############################################################################
3461 ###############################################################################
3463 have_xutf8drawstring=no
3464 AC_CHECK_X_LIB(X11, Xutf8DrawString,
3465 [have_xutf8drawstring=yes],
3466 [true], -lX11 -lXext -lm)
3467 if test "$have_xutf8drawstring" = yes ; then
3468 AC_DEFINE(HAVE_XUTF8DRAWSTRING)
3473 with_xft_req=unspecified
3476 [ --with-xft Include support for the X Freetype library.],
3477 [with_xft="$withval"; with_xft_req="$withval"],
3480 HANDLE_X_PATH_ARG(with_xft, --with-xft, Xft)
3482 if test "$with_xft" != yes -a "$with_xft" != no ; then
3483 echo "error: must be yes or no: --with-xft=$with_xft"
3487 if test "$with_xft" = yes; then
3491 pkg_check_version xft 2.1.0
3494 if test "$have_xft" = yes; then
3495 AC_CACHE_CHECK([for Xft includes], ac_cv_xft_config_cflags,
3496 [ac_cv_xft_config_cflags=`$pkg_config --cflags $pkgs`])
3497 AC_CACHE_CHECK([for Xft libs], ac_cv_xft_config_libs,
3498 [ac_cv_xft_config_libs=`$pkg_config --libs $pkgs`])
3501 ac_xft_config_cflags=$ac_cv_xft_config_cflags
3502 ac_xft_config_libs=$ac_cv_xft_config_libs
3504 if test "$have_xft" = yes; then
3506 # we appear to have Xft; check for headers/libs to be sure.
3508 ac_save_xft_CPPFLAGS="$CPPFLAGS"
3509 CPPFLAGS="$CPPFLAGS $ac_xft_config_cflags"
3512 AC_CHECK_X_HEADER(X11/Xft/Xft.h, [have_xft=yes])
3514 CPPFLAGS="$ac_save_xft_CPPFLAGS"
3517 if test "$have_xft" = yes; then
3518 # we have the headers, now check for the libraries
3522 AC_MSG_RESULT(checking for Xft usability...)
3523 AC_CHECK_X_LIB(c, XftDrawStringUtf8, [have_xft=yes],,
3524 $ac_xft_config_libs -lX11 -lXext -lm)
3527 if test "$have_xft" = no; then
3528 AC_MSG_RESULT(checking for Xft usability... no)
3532 if test "$have_xft" = yes; then
3533 INCLUDES="$INCLUDES $ac_xft_config_cflags"
3534 XFT_LIBS="$ac_xft_config_libs"
3540 XFT_SRCS='$(UTILS_SRC)/xft.c'
3541 XFT_OBJS='$(UTILS_BIN)/xft.o'
3545 ###############################################################################
3547 # Check for pty support: this allows 'phosphor' and 'apple2'
3548 # to run curses-based programs, or be used as terminal windows.
3550 ###############################################################################
3553 AC_CHECK_HEADERS(pty.h util.h sys/termios.h)
3554 AC_CHECK_X_LIB(util, forkpty,
3557 AC_DEFINE(HAVE_FORKPTY)])
3559 if test "$ac_have_forkpty" != yes ; then
3560 # we don't need (or have) -lutil on MacOS 10.4.2...
3561 AC_CHECK_X_LIB(c, forkpty,
3563 AC_DEFINE(HAVE_FORKPTY)])
3566 ###############################################################################
3568 # Check for the XSHM server extension.
3570 ###############################################################################
3573 with_xshm_req=unspecified
3574 AC_ARG_WITH(xshm-ext,
3575 [ --with-xshm-ext Include support for the Shared Memory extension.],
3576 [with_xshm="$withval"; with_xshm_req="$withval"],[with_xshm=yes])
3578 HANDLE_X_PATH_ARG(with_xshm, --with-xshm-ext, XSHM)
3580 if test "$with_xshm" = yes; then
3582 # first check for Xshm.h.
3583 AC_CHECK_X_HEADER(X11/extensions/XShm.h, [have_xshm=yes],,
3584 [#include <X11/Xlib.h>])
3586 # if that succeeded, then check for sys/ipc.h.
3587 if test "$have_xshm" = yes; then
3589 AC_CHECK_X_HEADER(sys/ipc.h, [have_xshm=yes])
3592 # if that succeeded, then check for sys/shm.h.
3593 if test "$have_xshm" = yes; then
3595 AC_CHECK_X_HEADER(sys/shm.h, [have_xshm=yes])
3598 # AIX is pathological, as usual: apparently it's normal for the Xshm headers
3599 # to exist, but the library code to not exist. And even better, the library
3600 # code is in its own library: libXextSam.a. So, if we're on AIX, and that
3601 # lib doesn't exist, give up. (This lib gets added to X_EXTRA_LIBS, and
3602 # that's not quite right, but close enough.)
3606 if [ `uname -v` -eq 3 ]; then
3608 AC_CHECK_X_LIB(XextSam, XShmQueryExtension,
3609 [have_xshm=yes; X_EXTRA_LIBS="$X_EXTRA_LIBS -lXextSam"],
3610 [true], -lX11 -lXext -lm)
3615 # if that succeeded, then we've really got it.
3616 if test "$have_xshm" = yes; then
3617 AC_DEFINE(HAVE_XSHM_EXTENSION)
3620 elif test "$with_xshm" != no; then
3621 echo "error: must be yes or no: --with-xshm-ext=$with_xshm"
3626 ###############################################################################
3628 # Check for the DOUBLE-BUFFER server extension.
3630 ###############################################################################
3633 with_xdbe_req=unspecified
3634 AC_ARG_WITH(xdbe-ext,
3635 [ --with-xdbe-ext Include support for the DOUBLE-BUFFER extension.],
3636 [with_xdbe="$withval"; with_xdbe_req="$withval"],[with_xdbe=yes])
3638 HANDLE_X_PATH_ARG(with_xdbe, --with-xdbe-ext, DOUBLE-BUFFER)
3640 if test "$with_xdbe" = yes; then
3642 AC_CHECK_X_HEADER(X11/extensions/Xdbe.h, [have_xdbe=yes],,
3643 [#include <X11/Xlib.h>])
3644 if test "$have_xdbe" = yes; then
3645 AC_DEFINE(HAVE_DOUBLE_BUFFER_EXTENSION)
3648 elif test "$with_xdbe" != no; then
3649 echo "error: must be yes or no: --with-xdbe-ext=$with_xshm"
3654 ###############################################################################
3656 # Check for the SGI XReadDisplay server extension.
3658 # Note: this has to be down here, rather than up with the other server
3659 # extension tests, so that the output of `configure --help' is in the
3660 # right order. Arrgh!
3662 ###############################################################################
3665 with_readdisplay_req=unspecified
3666 AC_ARG_WITH(readdisplay,
3667 [ --with-readdisplay Include support for the XReadDisplay extension.],
3668 [with_readdisplay="$withval"; with_readdisplay_req="$withval"],
3669 [with_readdisplay=yes])
3671 HANDLE_X_PATH_ARG(with_readdisplay, --with-readdisplay, XReadDisplay)
3673 if test "$with_readdisplay" = yes; then
3674 AC_CHECK_X_HEADER(X11/extensions/readdisplay.h,
3675 AC_DEFINE(HAVE_READ_DISPLAY_EXTENSION),,
3676 [#include <X11/Xlib.h>])
3677 elif test "$with_readdisplay" != no; then
3678 echo "error: must be yes or no: --with-readdisplay=$with_readdisplay"
3683 ###############################################################################
3685 # Check for a directory full of images to use as the default value
3686 # of the "imageDirectory" preference.
3688 ###############################################################################
3691 with_imagedir_req=unspecified
3693 AC_ARG_WITH(image-directory,
3694 [ --with-image-directory Arg is the default directory from which some demos
3695 will choose random images to display.],
3696 [with_imagedir="$withval"; with_imagedir_req="$withval"],
3697 [with_imagedir=yes])
3698 # no HANDLE_X_PATH_ARG for this one
3700 case "$with_imagedir" in
3703 AC_MSG_CHECKING([for image directory $with_imagedir])
3704 if test -d "$with_imagedir" ; then
3714 #### Could use some more defaults here...
3716 "/usr/share/backgrounds/images/" \
3717 "/usr/share/wallpapers/" \
3718 "/Library/Desktop Pictures/" \
3720 if test -z "$with_imagedir"; then
3721 AC_MSG_CHECKING([for image directory $dd])
3722 if test -d "$dd" ; then
3737 echo "error: must be an absolute path: --with-image-directory=$with_imagedir_req"
3741 ac_cv_imagedir="$with_imagedir"
3743 DEFAULT_IMAGES_P='True'
3744 DEFAULT_IMAGE_DIRECTORY="$ac_cv_imagedir"
3746 if test -z "$DEFAULT_IMAGE_DIRECTORY" ; then
3747 DEFAULT_IMAGES_P='False'
3751 ###############################################################################
3753 # Pick a text file to use as the default of the "textFile" preference.
3754 # Any old file will do, but preferably one that will make interesting
3755 # shapes when displayed by "starwars" and "fontglide".
3757 ###############################################################################
3760 with_textfile_req=unspecified
3762 AC_ARG_WITH(text-file,
3763 [ --with-text-file=FILE By default, some demos may display this file.],
3764 [with_textfile="$withval"; with_textfile_req="$withval"],
3765 [with_textfile=yes])
3766 # no HANDLE_X_PATH_ARG for this one
3768 case "$with_textfile" in
3771 AC_MSG_CHECKING([for text file $with_textfile])
3772 if test -f "$with_textfile" ; then
3782 #### Could use some more defaults here...
3784 "/usr/X11R6/lib/X11/doc/README" \
3785 "/usr/share/doc/xserver-common/copyright" \
3786 "/usr/share/doc/xserver-xorg-core/copyright" \
3787 "/usr/X11R6/README" \
3788 "/usr/share/doc/libX11*/COPYING" \
3789 "/usr/X11/share/X11/doc/README*" \
3790 "/usr/share/doc/debian/debian-manifesto" \
3792 if test -z "$with_textfile"; then
3793 AC_MSG_CHECKING([for text file $f])
3794 f=`/bin/ls $f 2>&- | head -1`
3795 if test -f "$f" ; then
3810 echo "error: must be an absolute path: --with-text-file=$with_textfile_req"
3814 ac_cv_textfile="$with_textfile"
3816 DEFAULT_TEXT_FILE="$ac_cv_textfile"
3819 ###############################################################################
3821 # Check the browser to see help URL
3823 ###############################################################################
3826 with_browser_req=unspecified
3828 AC_ARG_WITH(browser,
3829 [ --with-browser=BROWSER Specify the web browser used to show the help URL.],
3830 [with_browser="$withval"; with_browser_req="$withval"],
3832 # no HANDLE_X_PATH_ARG for this one
3834 case "$with_browser" in
3838 WITH_BROWSER=$with_browser
3839 gnome_open_program=$with_browser
3840 AC_MSG_CHECKING([for browser $with_browser])
3841 with_browser_fullpath=`which $with_browser 2>/dev/null`
3842 case $with_browser_fullpath in
3849 # Only warning: we don't want to install all packages for the
3850 # dependency of the browser in building stage...
3851 echo "WARNING: browser not found: --with-browser=$with_browser"
3856 ac_cv_browser="$with_browser"
3858 ###############################################################################
3860 # Check whether it's ok to install some hacks as setuid (e.g., "sonar")
3861 # This should be safe, but let's give people the option.
3863 ###############################################################################
3865 setuid_hacks_default=no
3866 setuid_hacks="$setuid_hacks_default"
3867 AC_ARG_WITH(setuid-hacks,
3868 [ --with-setuid-hacks Allow some demos to be installed `setuid root'
3869 (which is needed in order to ping other hosts.)
3871 [setuid_hacks="$withval"], [setuid_hacks="$setuid_hacks_default"])
3873 HANDLE_X_PATH_ARG(setuid_hacks, --with-setuid-hacks, setuid hacks)
3875 if test "$setuid_hacks" = yes; then
3877 elif test "$setuid_hacks" != no; then
3878 echo "error: must be yes or no: --with-setuid-hacks=$setuid_hacks"
3883 ###############################################################################
3885 # Check for --with-record-animation
3887 ###############################################################################
3889 record_anim_default=no
3890 record_anim="$record_anim_default"
3891 AC_ARG_WITH(record-animation,
3892 [ --with-record-animation Include code for generating MP4 videos.
3894 [record_anim="$withval"], [record_anim="$record_anim_default"])
3896 HANDLE_X_PATH_ARG(record_anim, --with-record-animation, record animation)
3898 if test "$record_anim" = yes; then
3900 elif test "$record_anim" != no; then
3901 echo "error: must be yes or no: --with-record-animation=$record_anim"
3905 if test "$record_anim" = yes; then
3906 if test "$have_gdk_pixbuf" != yes; then
3907 AC_MSG_ERROR(--with-record-animation requires GDK-Pixbuf)
3909 AC_MSG_RESULT(enabling --with-record-animation)
3910 AC_DEFINE(HAVE_RECORD_ANIM)
3911 ANIM_OBJS='$(ANIM_OBJS)'
3912 ANIM_LIBS='$(ANIM_LIBS)'
3916 ###############################################################################
3918 # Done testing. Now, set up the various -I and -L variables,
3919 # and decide which GUI program to build by default.
3921 ###############################################################################
3928 if test \! -z "$includedir" ; then
3929 INCLUDES="$INCLUDES -I$includedir"
3932 if test \! -z "$libdir" ; then
3933 LDFLAGS="$LDFLAGS -L$libdir"
3937 PREFERRED_DEMO_PROGRAM=''
3939 if test "$have_motif" = yes; then
3940 PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Xm
3941 ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
3943 if test "$have_gtk" = yes; then
3944 PREFERRED_DEMO_PROGRAM=xscreensaver-demo-Gtk
3945 ALL_DEMO_PROGRAMS="$PREFERRED_DEMO_PROGRAM $ALL_DEMO_PROGRAMS"
3949 if test "$have_kerberos" = yes; then
3950 PASSWD_SRCS="$PASSWD_SRCS \$(KERBEROS_SRCS)"
3951 PASSWD_OBJS="$PASSWD_OBJS \$(KERBEROS_OBJS)"
3953 if test "$have_pam" = yes; then
3954 PASSWD_SRCS="$PASSWD_SRCS \$(PAM_SRCS)"
3955 PASSWD_OBJS="$PASSWD_OBJS \$(PAM_OBJS)"
3956 INSTALL_PAM="install-pam"
3958 if test "$enable_pam_check_account_type" = yes; then
3959 COMMENT_PAM_CHECK_ACCOUNT=""
3961 COMMENT_PAM_CHECK_ACCOUNT="#"
3963 if test "$have_passwd_helper" = yes; then
3964 PASSWD_SRCS="$PASSWD_SRCS \$(PWHELPER_SRCS)"
3965 PASSWD_OBJS="$PASSWD_OBJS \$(PWHELPER_OBJS)"
3967 PASSWD_SRCS="$PASSWD_SRCS \$(PWENT_SRCS)"
3968 PASSWD_OBJS="$PASSWD_OBJS \$(PWENT_OBJS)"
3971 if test "$enable_locking" = yes; then
3972 LOCK_SRCS='$(LOCK_SRCS_1) $(PASSWD_SRCS)'
3973 LOCK_OBJS='$(LOCK_OBJS_1) $(PASSWD_OBJS)'
3975 LOCK_SRCS='$(NOLOCK_SRCS_1)'
3976 LOCK_OBJS='$(NOLOCK_OBJS_1)'
3979 if test "$ac_macosx" = yes; then
3980 EXES_OSX='$(EXES_OSX)'
3981 SCRIPTS_OSX='$(SCRIPTS_OSX)'
3982 MEN_OSX='$(MEN_OSX)'
3990 INSTALL_SETUID='$(INSTALL_PROGRAM) $(SUID_FLAGS)'
3992 if test "$need_setuid" = yes; then
3998 if test "$setuid_hacks" = yes; then
4005 if test "$have_gl" = yes; then
4006 GL_EXES='$(GL_EXES)'
4007 SUID_EXES='$(SUID_EXES)'
4008 RETIRED_GL_EXES='$(RETIRED_GL_EXES)'
4009 GL_UTIL_EXES='$(GL_UTIL_EXES)'
4016 if test "$have_gle" = yes; then
4017 GLE_EXES='$(GLE_EXES)'
4023 if test "$have_jpeg" = yes -a "$have_gdk_pixbuf" = yes; then
4024 JPEG_EXES='$(JPEG_EXES)'
4028 # Another substitution in the XScreenSaver.ad.in file:
4030 if test "$gnome_open_program" != ''; then
4034 elif test "$gnome_url_show_program" != ''; then
4045 # Set PO_DATADIR to something sensible.
4047 AC_MSG_CHECKING([for locale directory])
4048 if test -n "$GTK_DATADIR" ; then
4049 PO_DATADIR="$GTK_DATADIR"
4050 elif test "$have_gtk" = yes; then
4051 PO_DATADIR=`$pkg_config --variable=prefix gtk+-2.0`
4052 PO_DATADIR="$PO_DATADIR/share"
4055 if test -z "$PO_DATADIR" ; then
4057 # #### Total fucking kludge --
4058 # Map /build/prefix/usr/X11R6/share/ to /build/prefix/usr/share/
4059 # but of course we need to expand all the nested variables to do that...
4061 dd=`eval eval eval eval eval eval eval eval eval eval eval echo $datadir`
4062 PO_DATADIR=`echo $dd | sed 's@/X11R6/@/@'`
4065 AC_MSG_RESULT($PO_DATADIR/locale)
4068 # canonicalize slashes.
4069 HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`
4071 # gcc 3.0 likes to issue this warning for every file:
4073 # cc1: warning: changing search order for system directory "/usr/local/include"
4074 # cc1: warning: as it has already been specified as a non-system directory
4076 # Yay. We can only avoid that by deleting "-I${prefix}/include" from the list.
4077 # Which *should* be totally redundant, and thus an ok thing to delete?
4079 INCLUDES=`echo "$INCLUDES" | sed 's@ -I${prefix}/include@@g;'`
4082 ###############################################################################
4084 # Perform substitutions and write Makefiles.
4086 ###############################################################################
4090 AC_SUBST(PREFERRED_DEMO_PROGRAM)
4091 AC_SUBST(ALL_DEMO_PROGRAMS)
4092 AC_SUBST(SAVER_LIBS)
4093 AC_SUBST(MOTIF_LIBS)
4102 AC_SUBST(XDPMS_LIBS)
4103 AC_SUBST(XINERAMA_LIBS)
4104 AC_SUBST(PASSWD_LIBS)
4105 AC_SUBST(INSTALL_SETUID)
4106 AC_SUBST(SETUID_HACKS)
4107 AC_SUBST(INSTALL_DIRS)
4108 AC_SUBST(NEED_SETUID)
4109 AC_SUBST(INSTALL_PAM)
4110 AC_SUBST(HAVE_PAM_FAIL_DELAY)
4111 AC_SUBST(COMMENT_PAM_CHECK_ACCOUNT)
4112 AC_SUBST(NEW_LOGIN_COMMAND)
4113 AC_SUBST(NEW_LOGIN_COMMAND_P)
4114 AC_SUBST(DEFAULT_IMAGES_P)
4115 AC_SUBST(DEFAULT_IMAGE_DIRECTORY)
4116 AC_SUBST(DEFAULT_TEXT_FILE)
4117 AC_SUBST(WITH_BROWSER)
4118 AC_SUBST(COMMENT_DEMO_GLADE2_GTK_2_22_HEAD)
4119 AC_SUBST(COMMENT_DEMO_GLADE2_GTK_2_22_TAIL)
4124 AC_SUBST(SCRIPTS_OSX)
4127 AC_SUBST(PASSWD_SRCS)
4128 AC_SUBST(PASSWD_OBJS)
4135 AC_SUBST(SAVER_GL_SRCS)
4136 AC_SUBST(SAVER_GL_OBJS)
4137 AC_SUBST(SAVER_GL_LIBS)
4142 AC_SUBST(RETIRED_GL_EXES)
4144 AC_SUBST(GL_UTIL_EXES)
4148 AC_SUBST(GLE_KLUDGE)
4149 AC_SUBST(JWZGLES_OBJS)
4154 AC_SUBST(HACKDIR_FULL)
4155 AC_SUBST(GTK_DATADIR)
4156 AC_SUBST(PO_DATADIR)
4157 AC_SUBST(HACK_CONF_DIR)
4158 AC_SUBST(GTK_EXTRA_OBJS)
4162 APPDEFAULTS=$ac_x_app_defaults
4163 AC_SUBST(APPDEFAULTS)
4166 AC_SUBST(DEPEND_FLAGS)
4167 AC_SUBST(DEPEND_DEFINES)
4177 driver/xscreensaver.pam
4178 driver/xscreensaver-demo.glade2
4179 driver/XScreenSaver.ad)
4181 ###############################################################################
4183 # Print some warnings at the end.
4185 ###############################################################################
4187 warn_prefix_1=" Warning:"
4188 warn_prefix_2=" Note:"
4189 warn_prefix="$warn_prefix_1"
4192 warnsep=' #################################################################'
4195 if test "$warning" = no ; then
4196 echo '' ; echo "$warnsep" ; echo ''
4203 if test "$warning" = long ; then echo '' ; fi
4206 echo "$warn_prefix $rest"
4213 if test "$was" != no ; then echo '' ; fi
4215 echo "$warn_prefix $rest"
4225 warn_prefix="$warn_prefix_2"
4227 warn_prefix="$warn_prefix_1"
4231 warn_prefix="$warn_prefix_2"
4233 warn_prefix="$warn_prefix_1"
4237 # ac_prog_cc_no_pthread normally only happens on AIX, because according
4238 # to AX_PTHREAD, AIX needs CC=xlc_r or CC=cc_r to do threads.
4239 # If CC is specified, it takes precedence over --with-pthread.
4240 if test "$ac_prog_cc_no_pthread" ; then
4241 warnL "You requested $ac_original_cc for the C compiler, but it doesn't"
4242 warn2 "support POSIX threads."
4244 warn2 "If you have multiple CPU cores, try CC=$PTHREAD_CC."
4245 elif test "$with_pthread_req" = yes -a "$have_pthread" = no ; then
4246 warn 'POSIX threads were requested, but were not found.'
4249 if test "$with_sgi_req" = yes -a "$have_sgi" = no ; then
4250 warn 'The SGI saver extension was requested, but was not found.'
4253 if test "$with_xidle_req" = yes -a "$have_xidle" = no ; then
4254 warn 'The XIdle extension was requested, but was not found.'
4257 if test "$with_xshm_req" = yes -a "$have_xshm" = no ; then
4258 warn 'The XSHM extension was requested, but was not found.'
4261 if test "$with_xdbe_req" = yes -a "$have_xdbe" = no ; then
4262 warn 'The DOUBLE-BUFFER extension was requested, but was not found.'
4265 if test "$with_sgivc_req" = yes -a "$have_sgivc" = no ; then
4266 warn 'The SGI-VIDEO-CONTROL extension was requested, but was not found.'
4269 if test "$with_dpms_req" = yes -a "$have_dpms" = no ; then
4270 warn 'The DPMS extension was requested, but was not found.'
4273 if test "$with_xinerama_req" = yes -a "$have_xinerama" = no ; then
4274 warn 'The Xinerama extension was requested, but was not found.'
4277 if test "$with_xf86vmode_req" = yes -a "$have_xf86vmode" = no ; then
4278 warn 'The XF86VMODE extension was requested, but was not found.'
4281 if test "$with_randr_req" = yes -a "$have_randr" = no ; then
4282 warn 'The RANDR extension was requested, but was not found.'
4285 if test "$with_proc_interrupts_req" = yes -a "$have_proc_interrupts" = no; then
4286 warn "Checking of /proc/interrupts was requested, but it's bogus."
4289 if test "$pkg_config" = false ; then
4290 warnL 'The "pkg-config" program was not found. Without that,'
4291 warn2 "detection of the various GTK libraries won't work."
4293 pkgerr=`$pkg_config --list-all 2>&1 >/dev/null`
4294 if test "x$pkgerr" != "x" ; then
4295 warnL 'The "pkg-config" program produces errors. This often causes'
4296 warn2 "detection of the various GTK libraries to malfunction."
4297 warn2 "The errors are:"
4299 echo "$pkgerr" | sed 's/^/ > /g'
4303 if test "$gtk_halfassed" != no ; then
4304 warnL "GTK version $gtk_halfassed was found, but at least one supporting"
4305 warn2 "library ($gtk_halfassed_lib) was not, so GTK can't be used."
4306 warn2 "Perhaps some of the development packages are not installed?"
4307 if test "$have_gtk" = yes ; then
4308 v="$ac_gtk_version_string"
4309 warn2 "GTK $v is also installed, so it will be used instead."
4310 warn2 "Please read the above output and the \`config.log' file"
4311 warn2 "for more details."
4316 warn2 'Though the Motif front-end to xscreensaver is still'
4317 warn2 'maintained, it is no longer being updated with new'
4318 warn2 'features: all new development on the xscreensaver-demo'
4319 warn2 'program is happening in the GTK version, and not in the'
4320 warn2 'Motif version. It is recommended that you build against'
4321 warn2 'GTK instead of Motif. See <http://www.gtk.org/>.'
4324 if test "$have_motif" = no -a "$have_gtk" = no; then
4326 if test "$with_motif" = yes; then
4327 warnL "Neither the GTK nor Motif libraries were found; the"
4328 warn2 "\`xscreensaver-demo' program requires one of these."
4332 warnL "The GTK libraries do not seem to be available; the"
4333 warn2 "\`xscreensaver-demo' program requires them."
4335 # warn2 'You can use Motif or Lesstif instead of GTK (use the'
4336 # warn2 "\`--with-motif' option) but that is NOT recommended."
4340 elif test "$with_motif_req" = yes -a "$have_motif" = no ; then
4341 warnL "Use of Motif was requested, but it wasn't found;"
4342 warn2 "Gtk will be used instead."
4344 elif test "$jurassic_gtk" = yes ; then
4348 v="$ac_gtk_version_string"
4349 if test "$with_gtk_req" = yes -a "$ac_gtk_version" = "unknown" ; then
4350 warnL "Use of Gtk was requested, but its version number is unknown;"
4351 elif test "$with_gtk_req" = yes ; then
4352 warnL "Use of Gtk was requested, but it is version $v;"
4354 warnL "Gtk was found on this system, but it is version $v;"
4357 warn2 "Gtk $pref_gtk or newer is required."
4359 elif test "$with_gtk_req" = yes -a "$have_gtk" = no ; then
4360 warnL "Use of Gtk was requested, but it wasn't found."
4364 if test "$have_gtk" = yes -a "$have_gdk_pixbuf" = no ; then
4365 warn "GTK is being used, but the GDK-Pixbuf library and/or"
4366 warn2 "headers were not found. That can't be good. Please"
4367 warn2 "install the GDK-Pixbuf development kit and re-configure."
4370 if test "$have_motif" = yes -a "$have_lesstif" = yes ; then
4372 preferred_lesstif=0.92
4374 if test "$lesstif_version" = unknown; then
4375 warnL "Unable to determine the LessTif version number!"
4376 warn2 "Make sure you are using version $preferred_lesstif or newer."
4377 warn2 "See <http://www.lesstif.org/>."
4379 elif test \! $lesstif_version -gt 82; then
4380 warnL "LessTif version $lesstif_version_string is being used."
4381 warn2 "LessTif versions 0.82 and earlier are too buggy to"
4382 warn2 "use with XScreenSaver; it is strongly recommended"
4383 warn2 "that you upgrade to at least version $preferred_lesstif!"
4384 warn2 "See <http://www.lesstif.org/>."
4389 if test "$have_motif" = yes -a "$have_gtk" = no ; then
4390 warn 'Motif is being used, and GTK is not.'
4396 if test "$with_xpm_req" = yes -a "$have_xpm" = no; then
4397 warnL 'Use of XPM was requested, but it was not found.'
4400 if test "$with_gdk_pixbuf_req" = yes -a "$have_gdk_pixbuf" = no; then
4401 warnL 'Use of GDK-Pixbuf was requested, but it was not found.'
4404 if test "$have_gdk_pixbuf" = no -o "$gdk_pixbuf_halfassed" = yes || \
4405 test "$have_gdk_pixbuf" = no -a "$have_xpm" = no ; then
4407 if test "$with_gdk_pixbuf_req" = yes ; then
4409 elif test "$with_gdk_pixbuf_req" = no ; then
4410 warnL 'The GDK-Pixbuf library is not being used.'
4412 warnL 'The GDK-Pixbuf library was not found.'
4415 if test "$with_xpm_req" = yes -o "$have_xpm" = yes ; then
4417 elif test "$with_xpm_req" = no ; then
4418 warnL 'The XPM library is not being used.'
4420 warnL 'The XPM library was not found.'
4423 if test "$have_gdk_pixbuf" = no -a "$have_xpm" = yes ; then
4424 warn2 'The XPM library is being used instead.'
4427 if test "$gdk_pixbuf_halfassed" = yes ; then
4429 warn2 'More specifically, we found the headers, but not the'
4430 warn2 'libraries; so either GDK-Pixbuf is half-installed on this'
4431 warn2 "system, or something else went wrong. The \`config.log'"
4432 warn2 'file might contain some clues.'
4436 warn2 'Some of the demos will not use images as much as they could.'
4437 warn2 'You should consider installing GDK-Pixbuf and re-running'
4438 warn2 'configure. (GDK-Pixbuf is recommended over XPM, as it'
4439 warn2 'provides support for more image formats.)'
4443 if test "$have_jpeg" = no ; then
4444 if test "$with_jpeg_req" = yes ; then
4445 warnL 'Use of libjpeg was requested, but it was not found.'
4446 elif test "$with_jpeg_req" = no ; then
4447 noteL 'The JPEG library is not being used.'
4449 noteL 'The JPEG library was not found.'
4452 if test "$jpeg_halfassed" = yes ; then
4454 warn2 'More specifically, we found the headers, but not the'
4455 warn2 'library; so either JPEG is half-installed on this'
4456 warn2 "system, or something else went wrong. The \`config.log'"
4457 warn2 'file might contain some clues.'
4461 if test "$have_gdk_pixbuf" = no ; then
4462 warn2 "This means that it won't be possible for the image-manipulating"
4463 warn2 "display modes to load files from disk; and it also means that"
4464 warn2 "the \`webcollage' program will be much slower."
4466 warn2 "This means the \`webcollage' program will be much slower."
4471 if test "$have_xft" = no ; then
4472 if test "$with_xft_req" = yes ; then
4473 warnL "Use of libXft was requested, but it was not found."
4474 elif test "$with_xft_req" = no ; then
4475 noteL 'The Xft library is not being used.'
4477 noteL "The Xft library was not found."
4480 if test "$xft_halfassed" = yes ; then
4482 warn2 'More specifically, we found the headers, but not the'
4483 warn2 'libraries; so either Xft is half-installed on this'
4484 warn2 "system, or something else went wrong. The \`config.log'"
4485 warn2 'file might contain some clues.'
4489 warn2 "This means that fonts won't be anti-aliased."
4493 if test "$have_gl" = yes -a "$ac_have_mesa_gl" = yes ; then
4494 preferred_mesagl=3.4
4495 mgv="$ac_mesagl_version_string"
4496 pgl="$preferred_mesagl"
4498 if test "$ac_mesagl_version" = unknown; then
4500 # warnL "Unable to determine the MesaGL version number!"
4501 # warn2 "Make sure you are using version $preferred_mesagl or newer."
4503 elif test \! "$ac_mesagl_version" -gt 2006; then
4504 warnL "MesaGL version number is $mgv --"
4505 warn2 "MesaGL 2.6 and earlier have a security bug. It is strongly"
4506 warn2 "recommended that you upgrade to at least version $preferred_mesagl."
4508 elif test \! "$ac_mesagl_version" -gt 3003; then
4509 warnL "MesaGL version number is $mgv --"
4510 warn2 "MesaGL 3.3 and earlier have some bugs; it is recommended"
4511 warn2 "that you upgrade to $pgl or newer."
4515 if test "$have_gl" = no ; then
4516 if test "$with_gl_req" = yes ; then
4517 warnL 'Use of GL was requested, but it was not found.'
4518 elif test "$with_gl_req" = no ; then
4519 noteL 'The OpenGL 3D library is not being used.'
4521 noteL 'The OpenGL 3D library was not found.'
4524 if test "$gl_halfassed" = yes ; then
4526 warn2 'More specifically, we found the headers, but not the'
4527 warn2 'libraries; so either GL is half-installed on this'
4528 warn2 "system, or something else went wrong. The \`config.log'"
4529 warn2 'file might contain some clues.'
4533 warn2 'Those demos which use 3D will not be built or installed.'
4534 warn2 'You might want to consider installing OpenGL and'
4535 warn2 're-running configure.'
4540 if test "$have_gl" = yes -a "$have_gle" = no ; then
4542 # nobody cares about this; don't print the warning unless it was
4543 # requested and not found, or halfway-found.
4544 if test "$with_gle_req" = yes -o "$gle_halfassed" = yes ; then
4546 if test "$with_gle_req" = yes ; then
4547 noteL 'Use of the GLE (GL Extrusion) library was requested, but'
4548 warn2 'it was not found (though the OpenGL library was found, and'
4549 warn2 'is being used.)'
4550 elif test "$with_gle_req" = no ; then
4551 noteL 'The OpenGL Library is being used, but the GLE (GL Extrusion)'
4552 warn2 'library is not.'
4554 noteL 'The OpenGL Library was found, but the GLE (GL Extrusion)'
4555 warn2 'library was not.'
4558 if test "$gle_halfassed" = yes ; then
4560 warn2 'More specifically, we found the headers, but not the'
4561 warn2 'libraries; so either GLE is half-installed on this'
4562 warn2 "system, or something else went wrong. The \`config.log'"
4563 warn2 'file might contain some clues.'
4567 warn2 'Some of the OpenGL (3D) demos (those that depend on GLE)'
4568 warn2 'will not be built or installed. You might want to consider'
4569 warn2 'installing GLE and re-running configure. You can find the'
4570 warn2 'GLE library at <http://www.linas.org/gle/>'
4576 if test "$with_readdisplay_req" = yes -a "$have_readdisplay" = no ; then
4577 warn 'Use of XReadDisplay was requested, but it was not found.'
4580 if test "$with_kerberos_req" = yes -a "$have_kerberos" = no ; then
4581 warn 'Use of Kerberos was requested, but it was not found.'
4584 if test "$with_pam_req" = yes -a "$have_pam" = no ; then
4585 warn 'Use of PAM was requested, but it was not found.'
4588 if test "$with_shadow_req" = yes -a "$have_shadow" = no ; then
4589 warn 'Use of shadow passwords was requested, but they were not found.'
4592 if test "$ac_macosx" = yes ; then
4593 if test "$enable_locking" = yes ; then
4594 warn "You have specified --enable-locking on MacOS X."
4595 warn2 "THIS DOES NOT WORK! Don't do this!"
4600 # You are in a twisty maze of namespaces and syntaxes, all alike.
4601 # Fuck the skull of Unix.
4603 bindir=`eval eval eval eval eval eval eval echo $bindir`
4604 HACKDIR=`eval eval eval eval eval eval eval echo $HACKDIR`
4605 HACK_CONF_DIR=`eval eval eval eval eval eval eval echo $HACK_CONF_DIR`
4607 # canonicalize slashes.
4608 bindir=`echo "${bindir}" | sed 's@/$@@;s@//*@/@g'`
4609 HACKDIR=`echo "${HACKDIR}" | sed 's@/$@@;s@//*@/@g'`
4610 HACK_CONF_DIR=`echo "${HACK_CONF_DIR}" | sed 's@/$@@;s@//*@/@g'`
4613 # Sanity check the hackdir
4614 for bad_choice in xscreensaver xscreensaver-demo xscreensaver-command ; do
4615 if test "${HACKDIR}" = "${bindir}/${bad_choice}" ; then
4617 AC_MSG_ERROR([\"--with-hackdir=${bindir}/${bad_choice}\" won't work.
4618 There will be an executable installed with that name, so
4619 that can't be the name of a directory as well. Please
4620 re-configure with a different directory name.])
4627 # Now let's warn if there's a previous RPM version already installed.
4628 # But don't bother with this test if we are currently *building* an RPM.
4630 if test -z "$RPM_PACKAGE_VERSION" ; then
4632 rpmnames="xscreensaver xscreensaver-base xscreensaver-extras"
4636 rpmv=`(rpm -qv $rpmnames) 2>/dev/null | \
4637 sed -n 's/^[-a-z]*-\([0-9][0-9]*[.][0-9][0-9a-z]*\)-.*$/\1/p' | \
4641 if test \! -z "$rpmv" ; then
4642 rpmbdir=`rpm -ql $rpmnames | sed -n 's@^\(.*\)/xscreensaver-demo$@\1@p'`
4643 rpmhdir=`rpm -ql $rpmnames | sed -n 's@^\(.*\)/popsquares$@\1@p'`
4646 warnL "There is already an installed RPM of xscreensaver $rpmv"
4647 warn2 'on this system. You might want to remove it ("rpm -ve")'
4648 warn2 'before running "make install" in this directory.'
4650 warn2 "Alternately, you could build this version of xscreensaver"
4651 warn2 'as an RPM, and then install that. An "xscreensaver.spec"'
4652 warn2 'file is included. Try "rpmbuild -v -ba xscreensaver.spec".'
4653 warn2 "See the RPM documentation for more info."
4656 if test "$rpmbdir" = "$rpmhdir" ; then
4657 warn2 "The RPM version was installed in $rpmbdir/."
4660 warn2 "The RPM version was installed in $rpmbdir/,"
4661 warn2 "with demos in $rpmhdir/."
4666 # Also warn if there's a Debian package installed.
4668 debnames="xscreensaver xscreensaver-data xscreensaver-data-extra"
4670 for dpkg in $debnames ; do
4671 if test -z "$debv"; then
4672 debv=`dpkg -s $dpkg 2>/dev/null | sed -n 's/^Version: \(.*\)$/\1/p'`
4676 if test \! -z "$debv" ; then
4677 debbdir=`dpkg -L $debnames 2>/dev/null | \
4678 sed -n 's@^\(.*/bin/\)xscreensaver$@\1@p'`
4679 debhdir=`dpkg -L $debnames 2>/dev/null | \
4680 sed -n 's@^\(.*/\)popsquares$@\1@p'`
4681 if test -z "$debbdir" ; then debbdir='???'; fi
4682 if test -z "$debhdir" ; then debhdir='???'; fi
4685 warnL "There is already an installed dpkg of xscreensaver"
4686 warn2 "version \"$debv\" on this system."
4688 warn2 "The dpkg was installed in $debbdir,"
4689 warn2 "with demos in $debhdir."
4693 if test "${bindir}" = "${HACKDIR}" ; then
4697 if test "$do_dir_warning" = yes; then
4701 echo ' When you run "make install", the "xscreensaver",'
4702 echo ' "xscreensaver-demo", and "xscreensaver-command" executables'
4703 echo " will be installed in ${bindir}/."
4705 echo " The various graphics demos (200+ different executables) will"
4706 echo " be installed in ${HACKDIR}/."
4708 echo " If you would prefer the demos to be installed elsewhere,"
4709 echo " you should re-run configure with the --with-hackdir=DIR"
4710 echo " option. For more information, run \`./configure --help'."
4714 if test "$warning" != no; then
4715 echo '' ; echo "$warnsep" ; echo ''
4718 if test "$do_dir_warning" = no; then
4719 if test "$warning" = no; then
4722 echo "User programs will be installed in ${bindir}/"
4723 echo "Screen savers will be installed in ${HACKDIR}/"
4724 echo "Configuration dialogs will be installed in ${HACK_CONF_DIR}/"
4725 echo "System-wide default settings will be installed in ${APPDEFAULTS}/"