git.hungrycats.org Git - xscreensaver/blob - driver/Makefile.in

   1 # driver/Makefile.in --- xscreensaver, Copyright (c) 1997-1999 Jamie Zawinski.
   2 # the `../configure' script generates `driver/Makefile' from this file.
   3
   4 @SET_MAKE@
   5 .SUFFIXES:
   6 .SUFFIXES: .c .o
   7
   8 srcdir          = @srcdir@
   9 VPATH           = @srcdir@
  10 top_srcdir      = @top_srcdir@
  11 top_builddir    = ..
  12
  13 install_prefix  =
  14 prefix          = @prefix@
  15 exec_prefix     = @exec_prefix@
  16 bindir          = @bindir@
  17 #datadir        = @datadir@
  18 datadir         = $(GNOME_DATADIR)
  19 localedir       = $(datadir)/locale
  20 mandir          = @mandir@
  21 mansuffix       = 1
  22 manNdir         = $(mandir)/man$(mansuffix)
  23
  24 INTLTOOL_MERGE  = @INTLTOOL_MERGE@
  25
  26 GNOME_DATADIR   = @GNOME_DATADIR@
  27 GNOME_CCDIR_1   = $(GNOME_DATADIR)/control-center/Desktop
  28 GNOME_CCDIR_2   = $(GNOME_DATADIR)/control-center/capplets
  29 GNOME_CCDIR_3   = $(GNOME_DATADIR)/control-center-2.0/capplets
  30 GNOME_PANELDIR1 = $(GNOME_DATADIR)/gnome/apps/Settings/Desktop
  31 GNOME_PANELDIR2 = $(GNOME_DATADIR)/applications
  32 GNOME_PANELDIR  = @GNOME_PANELDIR@
  33 GLADE_DATADIR   = @GLADE_DATADIR@
  34 GNOME_ICONDIR   = $(GNOME_DATADIR)/pixmaps
  35 GNOME_BINDIR    = $(bindir)
  36 HACK_CONF_DIR   = @HACK_CONF_DIR@
  37
  38 CC              = @CC@
  39 CFLAGS          = @CFLAGS@
  40 LDFLAGS         = @LDFLAGS@
  41 DEFS            = @DEFS@
  42 INTL_DEFS       = -DLOCALEDIR=\"$(localedir)\"
  43 SUBP_DEFS       = $(DEFS) -DDEFAULT_PATH_PREFIX='"@HACKDIR@"'
  44 GTK_DEFS        = $(DEFS) -DDEFAULT_ICONDIR='"$(GLADE_DATADIR)"'
  45 CONF_DEFS       = -DHACK_CONFIGURATION_PATH='"$(HACK_CONF_DIR)"'
  46
  47 LIBS            = @LIBS@
  48 INTL_LIBS       = @INTLLIBS@
  49 JPEG_LIBS       = @JPEG_LIBS@
  50 PERL            = @PERL@
  51
  52 DEPEND          = @DEPEND@
  53 DEPEND_FLAGS    = @DEPEND_FLAGS@
  54 DEPEND_DEFINES  = @DEPEND_DEFINES@
  55
  56 SHELL           = /bin/sh
  57 INSTALL         = @INSTALL@
  58 SUID_FLAGS      = -o root -m 4755
  59 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  60 INSTALL_SCRIPT  = @INSTALL_SCRIPT@
  61 INSTALL_SETUID  = @INSTALL_SETUID@
  62 INSTALL_DATA    = @INSTALL_DATA@
  63 INSTALL_DIRS    = @INSTALL_DIRS@
  64
  65 X_CFLAGS        = @X_CFLAGS@
  66 X_LIBS          = @X_LIBS@
  67 X_PRE_LIBS      = @X_PRE_LIBS@
  68 X_EXTRA_LIBS    = @X_EXTRA_LIBS@
  69 XMU_LIBS        = @XMU_LIBS@
  70 XPM_LIBS        = @XPM_LIBS@
  71
  72 # Note:
  73 #
  74 # X_LIBS would more properly be called X_LDFLAGS (it contains the -L args.)
  75 # X_PRE_LIBS contains extra libraries you have to link against on some systems,
  76 #         and that must come before -lX11.  (e.g., -lSM and -lICE.)
  77 # X_EXTRA_LIBS contains extra libraries needed by X that aren't a part of X.
  78 #         (e.g., -lsocket, -lnsl, etc.)
  79 #
  80 # I think (but am not totally sure) that LIBS is also really "LDFLAGS".
  81 #
  82 # SAVER_LIBS is the link line for "xscreensaver", and
  83 # CMD_LIBS is the link line for "xscreensaver-command".
  84 # GETIMG_LIBS is the link line for "xscreensaver-getimage".
  85
  86
  87 AD_DIR          = @APPDEFAULTS@
  88 PAM_DIR         = /etc/pam.d
  89 PAM_CONF        = /etc/pam.conf
  90
  91 UTILS_SRC       = $(srcdir)/../utils
  92 UTILS_BIN       = ../utils
  93
  94 INCLUDES        = -I. -I$(srcdir) -I$(UTILS_SRC) -I.. @INCLUDES@
  95
  96 MOTIF_SRCS      = demo-Xm.c demo-Xm-widgets.c
  97 MOTIF_OBJS      = demo-Xm.o demo-Xm-widgets.o
  98
  99 GTK_SRCS        = demo-Gtk.c demo-Gtk-conf.c \
 100                   demo-Gtk-widgets.c demo-Gtk-support.c
 101 GTK_EXTRA_OBJS  = demo-Gtk-widgets.o demo-Gtk-support.o
 102 GTK_OBJS        = demo-Gtk.o demo-Gtk-conf.o @GTK_EXTRA_OBJS@
 103
 104 PWENT_SRCS      = passwd-pwent.c
 105 PWENT_OBJS      = passwd-pwent.o
 106
 107 KERBEROS_SRCS   = passwd-kerberos.c
 108 KERBEROS_OBJS   = passwd-kerberos.o
 109
 110 PAM_SRCS        = passwd-pam.c
 111 PAM_OBJS        = passwd-pam.o
 112
 113 LOCK_SRCS_1     = lock.c passwd.c
 114 LOCK_OBJS_1     = lock.o passwd.o
 115 NOLOCK_SRCS_1   = lock.c
 116 NOLOCK_OBJS_1   = lock.o
 117
 118 TEST_SRCS       = test-passwd.c test-uid.c test-xdpms.c test-grab.c \
 119                   test-apm.c test-fade.c test-xinerama.c xdpyinfo.c
 120 TEST_EXES       = test-passwd   test-uid   test-xdpms   test-grab \
 121                   test-apm   test-fade   test-xinerama   xdpyinfo
 122
 123 MOTIF_LIBS      = @MOTIF_LIBS@ @XPM_LIBS@ $(XMU_LIBS)
 124 GTK_LIBS        = @GTK_LIBS@ $(XMU_LIBS)
 125 XML_LIBS        = @XML_LIBS@
 126
 127 XDPMS_LIBS      = @XDPMS_LIBS@
 128
 129 PASSWD_SRCS     = @PASSWD_SRCS@
 130 PASSWD_OBJS     = @PASSWD_OBJS@
 131 PASSWD_LIBS     = @PASSWD_LIBS@
 132
 133 LOCK_SRCS       = @LOCK_SRCS@
 134 LOCK_OBJS       = @LOCK_OBJS@
 135
 136 XMU_SRCS        = @XMU_SRCS@
 137 XMU_OBJS        = @XMU_OBJS@
 138
 139 GL_SRCS         = @SAVER_GL_SRCS@
 140 GL_OBJS         = @SAVER_GL_OBJS@
 141 GL_LIBS         = @SAVER_GL_LIBS@
 142
 143 ICON_SRC        = $(UTILS_SRC)/images
 144 LOGO            = $(ICON_SRC)/logo-50.xpm
 145 GTK_ICONS       = $(ICON_SRC)/screensaver-*.png
 146
 147 DEMO_UTIL_SRCS  = $(UTILS_SRC)/resources.c $(UTILS_SRC)/usleep.c \
 148                   $(UTILS_SRC)/visual.c
 149 DEMO_UTIL_OBJS  = $(UTILS_BIN)/resources.o $(UTILS_BIN)/usleep.o \
 150                   $(UTILS_BIN)/visual.o
 151
 152 SAVER_UTIL_SRCS = $(UTILS_SRC)/fade.c $(UTILS_SRC)/overlay.c \
 153                   $(UTILS_SRC)/logo.c $(UTILS_SRC)/yarandom.c \
 154                   $(DEMO_UTIL_SRCS)
 155 SAVER_UTIL_OBJS = $(UTILS_BIN)/fade.o $(UTILS_BIN)/overlay.o \
 156                   $(UTILS_BIN)/logo.o $(UTILS_BIN)/yarandom.o \
 157                   $(DEMO_UTIL_OBJS)
 158
 159 GETIMG_SRCS_1   = xscreensaver-getimage.c
 160 GETIMG_OBJS_1   = xscreensaver-getimage.o
 161
 162 GETIMG_SRCS     = $(GETIMG_SRCS_1) \
 163                   $(UTILS_SRC)/colorbars.o $(UTILS_SRC)/resources.o \
 164                   $(UTILS_SRC)/yarandom.o $(UTILS_SRC)/visual.o \
 165                   $(UTILS_SRC)/usleep.o $(UTILS_SRC)/hsv.o \
 166                   $(UTILS_SRC)/colors.o $(UTILS_SRC)/grabscreen.o \
 167                   $(UTILS_SRC)/logo.o prefs.o $(XMU_SRCS)
 168
 169 GETIMG_OBJS     = $(GETIMG_OBJS_1) \
 170                   $(UTILS_BIN)/colorbars.o $(UTILS_BIN)/resources.o \
 171                   $(UTILS_BIN)/yarandom.o $(UTILS_BIN)/visual.o \
 172                   $(UTILS_BIN)/usleep.o $(UTILS_BIN)/hsv.o \
 173                   $(UTILS_BIN)/colors.o $(UTILS_BIN)/grabscreen.o \
 174                   $(UTILS_BIN)/logo.o prefs.o $(XMU_OBJS)
 175
 176 SAVER_SRCS_1    = xscreensaver.c windows.c timers.c subprocs.c exec.c \
 177                   xset.c splash.c setuid.c stderr.c
 178 SAVER_OBJS_1    = xscreensaver.o windows.o timers.o subprocs.o exec.o \
 179                   xset.o splash.o setuid.o stderr.o
 180
 181 SAVER_SRCS      = $(SAVER_SRCS_1) prefs.c dpms.c $(LOCK_SRCS) \
 182                   $(SAVER_UTIL_SRCS) $(GL_SRCS) $(XMU_SRCS)
 183 SAVER_OBJS      = $(SAVER_OBJS_1) prefs.o dpms.o $(LOCK_OBJS) \
 184                   $(SAVER_UTIL_OBJS) $(GL_OBJS) $(XMU_OBJS)
 185
 186 CMD_SRCS        = remote.c xscreensaver-command.c
 187 CMD_OBJS        = remote.o xscreensaver-command.o
 188
 189 DEMO_SRCS_1     = prefs.c dpms.c $(XMU_SRCS)
 190 DEMO_OBJS_1     = prefs.o dpms.o $(XMU_OBJS)
 191
 192 DEMO_SRCS       = prefs.c dpms.c remote.c exec.c $(DEMO_UTIL_SRCS)
 193 DEMO_OBJS       = prefs.o dpms.o remote.o exec.o $(DEMO_UTIL_OBJS)
 194
 195 SAVER_LIBS      = $(LIBS) $(X_LIBS) $(XMU_LIBS) @SAVER_LIBS@ \
 196                   $(XDPMS_LIBS) $(GL_LIBS) $(X_PRE_LIBS) \
 197                   -lXt -lX11 -lXext $(X_EXTRA_LIBS) \
 198                   $(PASSWD_LIBS)
 199
 200 CMD_LIBS        = $(LIBS) $(X_LIBS) \
 201                   $(X_PRE_LIBS) -lX11 -lXext $(X_EXTRA_LIBS)
 202
 203 GETIMG_LIBS     = $(LIBS) $(X_LIBS) $(XPM_LIBS) $(JPEG_LIBS) \
 204                   $(X_PRE_LIBS) -lXt -lX11 $(XMU_LIBS) -lXext $(X_EXTRA_LIBS)
 205
 206 EXES            = xscreensaver xscreensaver-command xscreensaver-demo \
 207                   xscreensaver-getimage
 208 EXES2           = @ALL_DEMO_PROGRAMS@
 209 SCRIPTS         = xscreensaver-getimage-file xscreensaver-getimage-video
 210
 211 HDRS            = XScreenSaver_ad.h xscreensaver.h prefs.h remote.h \
 212                   demo-Gtk-widgets.h demo-Gtk-stubs.h demo-Gtk-support.h \
 213                   demo-Gtk-conf.h
 214 MEN             = xscreensaver.man xscreensaver-demo.man \
 215                   xscreensaver-command.man \
 216                   xscreensaver-getimage.man \
 217                   xscreensaver-getimage-file.man \
 218                   xscreensaver-getimage-video.man
 219 EXTRAS          = README Makefile.in XScreenSaver.ad.in xscreensaver.pam \
 220                   xscreensaver-demo.glade xscreensaver-demo.glade2 \
 221                   xscreensaver-demo.glade2p \
 222                   screensaver-properties.desktop.in \
 223                   screensaver-properties-capplet \
 224                   xscreensaver.kss.in \
 225                   .gdbinit
 226 VMSFILES        = compile_axp.com compile_decc.com link_axp.com link_decc.com \
 227                   vms-getpwnam.c vms-pwd.h vms-hpwd.c vms-validate.c \
 228                   vms_axp.opt vms_axp_12.opt vms_decc.opt vms_decc_12.opt
 229
 230 TARFILES        = $(EXTRAS) $(VMSFILES) $(SAVER_SRCS_1) \
 231                   $(MOTIF_SRCS) $(GTK_SRCS) $(PWENT_SRCS) \
 232                   $(KERBEROS_SRCS) $(PAM_SRCS) $(LOCK_SRCS_1) $(DEMO_SRCS_1) \
 233                   $(CMD_SRCS) $(GETIMG_SRCS_1) $(HDRS) $(SCRIPTS) \
 234                   $(TEST_SRCS) $(MEN)
 235
 236
 237 default: $(EXES)
 238 all: $(EXES) $(EXES2)
 239 tests: $(TEST_EXES)
 240
 241 install:   install-program   install-ad    install-scripts \
 242            install-gnome     install-kde   install-man   @INSTALL_PAM@
 243 uninstall: uninstall-program uninstall-ad  \
 244            uninstall-gnome   uninstall-kde uninstall-man
 245
 246 install-strip:
 247         $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
 248                 install
 249
 250 install-program: $(EXES)
 251         @if [ ! -d $(install_prefix)$(bindir) ]; then                   \
 252           $(INSTALL_DIRS) $(install_prefix)$(bindir) ;                  \
 253          fi
 254         @inst="$(INSTALL_PROGRAM)" ;                                    \
 255         if [ @NEED_SETUID@ = yes ]; then                                \
 256            me=`PATH="$$PATH:/usr/ucb" whoami` ;                         \
 257            if [ "$$me" = root ]; then                                   \
 258              inst="$(INSTALL_SETUID)" ;                                 \
 259            else                                                         \
 260             e=echo ;                                                    \
 261  $$e ""                                                                      ;\
 262  $$e "  ####################################################################";\
 263  $$e "  Warning: xscreensaver has been compiled with support for shadow"     ;\
 264  $$e "           passwords.  If your system actually uses shadow passwords," ;\
 265  $$e "           then xscreensaver must be installed as a setuid root"       ;\
 266  $$e "           program in order for locking to work.  To do this, you"     ;\
 267  $$e "           must run 'make install' as 'root', not as '$$me'."          ;\
 268  $$e ""                                                                      ;\
 269  $$e "           For now, xscreensaver will be installed non-setuid, which"  ;\
 270  $$e "           means that locking might not work.  (Try it and see.)"      ;\
 271  $$e "  ####################################################################";\
 272  $$e ""                                                                      ;\
 273            fi ;                                                               \
 274         fi ;                                                                  \
 275         echo $$inst xscreensaver $(install_prefix)$(bindir)/xscreensaver ;    \
 276         $$inst xscreensaver $(install_prefix)$(bindir)/xscreensaver
 277         @echo $(INSTALL_PROGRAM) xscreensaver-command \
 278           $(install_prefix)$(bindir)/xscreensaver-command ; \
 279         $(INSTALL_PROGRAM) xscreensaver-command \
 280           $(install_prefix)$(bindir)/xscreensaver-command
 281         @echo $(INSTALL_PROGRAM) xscreensaver-demo \
 282           $(install_prefix)$(bindir)/xscreensaver-demo ; \
 283         $(INSTALL_PROGRAM) xscreensaver-demo \
 284           $(install_prefix)$(bindir)/xscreensaver-demo
 285         @echo $(INSTALL_PROGRAM) xscreensaver-getimage \
 286           $(install_prefix)$(bindir)/xscreensaver-getimage ; \
 287         $(INSTALL_PROGRAM) xscreensaver-getimage \
 288           $(install_prefix)$(bindir)/xscreensaver-getimage
 289
 290 install-ad: XScreenSaver.ad
 291         @if [ ! -d $(install_prefix)$(AD_DIR) ]; then                         \
 292           $(INSTALL_DIRS) $(install_prefix)$(AD_DIR) ;                        \
 293          fi
 294         @-echo $(INSTALL_DATA) XScreenSaver.ad                                \
 295           $(install_prefix)$(AD_DIR)/XScreenSaver ;                           \
 296         if $(INSTALL_DATA) XScreenSaver.ad                                    \
 297           $(install_prefix)$(AD_DIR)/XScreenSaver ; then                      \
 298           true ;                                                              \
 299         else                                                                  \
 300           e=echo ;                                                            \
 301           if [ -f $(install_prefix)$(AD_DIR)/XScreenSaver ]; then             \
 302  $$e ""                                                                      ;\
 303  $$e "  ####################################################################";\
 304  $$e "  Warning: unable to install $(install_prefix)$(AD_DIR)/XScreenSaver"  ;\
 305  $$e "           That file exists, and is unwritable.  It is probably from"  ;\
 306  $$e "           an older version of xscreensaver, and could cause things"   ;\
 307  $$e "           to malfunction.  Please delete it!"                         ;\
 308  $$e "  ####################################################################";\
 309  $$e ""                                                                      ;\
 310             exit 1 ;                                                          \
 311           else                                                                \
 312  $$e ""                                                                      ;\
 313  $$e "  ####################################################################";\
 314  $$e "  Warning: unable to install $(install_prefix)$(AD_DIR)/XScreenSaver"  ;\
 315  $$e "           The directory is unwritable.  This is probably ok;"         ;\
 316  $$e "           xscreensaver should work without that file."                ;\
 317  $$e "  ####################################################################";\
 318  $$e ""                                                                      ;\
 319             exit 0 ;                                                          \
 320           fi                                                                  \
 321         fi
 322
 323 install-scripts: $(SCRIPTS) munge-scripts
 324         @for program in $(SCRIPTS); do                                  \
 325           if [ -r $$program ] ; then                                    \
 326             p=$$program ;                                               \
 327           else                                                          \
 328             p=$(srcdir)/$$program ;                                     \
 329           fi ;                                                          \
 330           echo $(INSTALL_SCRIPT) $$p                                    \
 331             $(install_prefix)$(bindir)/$$program ;                      \
 332           $(INSTALL_SCRIPT) $$p                                         \
 333             $(install_prefix)$(bindir)/$$program ;                      \
 334         done
 335
 336 munge-scripts: $(SCRIPTS)
 337         @tmp=/tmp/mf.$$$$ ;                                             \
 338         perl="${PERL}" ;                                                \
 339         rm -f $$tmp ;                                                   \
 340         for program in $(SCRIPTS); do                                   \
 341           sed "s@^\(#!\)\(/[^ ]*/perl[^ ]*\)\(.*\)\$$@\1$$perl\3@"      \
 342               < $(srcdir)/$$program > $$tmp ;                           \
 343           if cmp -s $(srcdir)/$$program $$tmp ; then                    \
 344             echo "$$program unchanged" ;                                \
 345             true ;                                                      \
 346           else                                                          \
 347             echo "$$program: setting interpreter to $$perl" ;           \
 348             cat $$tmp > ./$$program ;                                   \
 349           fi ;                                                          \
 350         done ;                                                          \
 351         rm -f $$tmp
 352
 353 install-man: $(MEN)
 354         @men="$(MEN)" ;                                                 \
 355         if [ ! -d $(install_prefix)$(manNdir) ]; then                   \
 356           $(INSTALL_DIRS) $(install_prefix)$(manNdir) ;                 \
 357          fi ;                                                           \
 358         for man in $$men; do                                            \
 359           instname=`echo $$man | sed 's/\.man$$/\.$(mansuffix)/'` ;     \
 360           echo $(INSTALL_DATA) $(srcdir)/$$man                          \
 361            $(install_prefix)$(manNdir)/$$instname ;                     \
 362           $(INSTALL_DATA) $(srcdir)/$$man                               \
 363             $(install_prefix)$(manNdir)/$$instname ;                    \
 364         done
 365
 366 uninstall-program:
 367         @for program in $(EXES) $(SCRIPTS); do                          \
 368           echo rm -f $(install_prefix)$(bindir)/$$program ;             \
 369           rm -f $(install_prefix)$(bindir)/$$program ;                  \
 370         done
 371
 372 uninstall-ad:
 373         rm -f $(install_prefix)$(AD_DIR)/XScreenSaver
 374
 375 uninstall-man:
 376         @men="$(MEN)" ;                                                 \
 377         for man in $$men; do                                            \
 378           instname=`echo $$man | sed 's/\.man$$/\.$(mansuffix)/'` ;     \
 379           echo rm -f $(install_prefix)$(manNdir)/$$instname ;           \
 380           rm -f $(install_prefix)$(manNdir)/$$instname ;                \
 381         done
 382
 383 install-pam:
 384         @src="$(srcdir)/xscreensaver.pam" ;                             \
 385         dest=`sed -n 's/.*PAM_SERVICE_NAME[     ]*"\([^"]*\)".*$$/\1/p' \
 386            < ../config.h` ;                                             \
 387         dir="$(install_prefix)$(PAM_DIR)" ;                             \
 388         conf="$(PAM_CONF)" ;                                            \
 389                                                                         \
 390         if [ -d $$dir ] ; then                                          \
 391                                                                         \
 392           if [ -f $$dir/xdm ]; then                                     \
 393             src2=$$dir/xdm ;                                            \
 394           elif [ -f $$dir/login ]; then                                 \
 395             src2=$$dir/login ;                                          \
 396           fi ;                                                          \
 397                                                                         \
 398           if [ -z "$$src2" ]; then                                      \
 399             echo $(INSTALL_DATA) $$src $$dir/$$dest ;                   \
 400             $(INSTALL_DATA) $$src $$dir/$$dest ;                        \
 401           else                                                          \
 402             src="xscreensaver.pam.$$$$" ;                               \
 403             echo "grep '^#%\|^auth' $$src2 > $$src" ;                   \
 404                   grep '^#%\|^auth' $$src2 > $$src ;                    \
 405             echo $(INSTALL_DATA) $$src $$dir/$$dest ;                   \
 406                  $(INSTALL_DATA) $$src $$dir/$$dest ;                   \
 407             echo rm -f $$src ;                                          \
 408                  rm -f $$src ;                                          \
 409           fi ;                                                          \
 410                                                                         \
 411           if [ ! -f $$dir/$$dest ]; then                                \
 412             e=echo ;                                                    \
 413  $$e ""                                                                      ;\
 414  $$e "  ####################################################################";\
 415  $$e "  Warning: xscreensaver has been compiled with support for Pluggable"  ;\
 416  $$e "           Authentication Modules (PAM).  However, we were unable to"  ;\
 417  $$e "           install the file $$dir/$$dest.  PAM is unlikely"            ;\
 418  $$e "           to work without this file (and old-style password"          ;\
 419  $$e "           authentication will be used instead, which may or may not"  ;\
 420  $$e "           work.)"                                                     ;\
 421  $$e "  ####################################################################";\
 422  $$e ""                                                                      ;\
 423           fi ;                                                          \
 424         elif [ -f $$conf ]; then                                        \
 425           if ( grep $$dest $$conf >/dev/null ); then                    \
 426            echo "$$conf unchanged: already has an entry for $$dest" ;   \
 427           else                                                          \
 428             src="pam.conf.$$$$" ;                                       \
 429             echo "grep -v $$dest $$conf > $$src" ;                      \
 430                   grep -v $$dest $$conf > $$src ;                       \
 431             extras=`sed -n "s/^login\(.*auth.*\)$$/$$dest\1/p" $$conf`; \
 432             echo "$$extras" >> $$src ;                                  \
 433             if [ "x$$extras" = "x" ]; then                              \
 434               echo "Error: no login rules in $$conf?" >&2 ;             \
 435             else                                                        \
 436               echo "adding $$dest rules to $$src:" ;                    \
 437               echo "$$extras" | sed 's/^/       /' ;                    \
 438             fi ;                                                        \
 439             echo $(INSTALL_DATA) $$src $$conf ;                         \
 440                  $(INSTALL_DATA) $$src $$conf ;                         \
 441             echo rm -f $$src ;                                          \
 442                  rm -f $$src ;                                          \
 443           fi ;                                                          \
 444           if ! ( grep $$dest $$conf >/dev/null ); then                  \
 445             e=echo ;                                                    \
 446  $$e ""                                                                      ;\
 447  $$e "  ####################################################################";\
 448  $$e "  Warning: xscreensaver has been compiled with support for Pluggable"  ;\
 449  $$e "           Authentication Modules (PAM).  However, we were unable to"  ;\
 450  $$e "           install xscreensaver rules in the file $$conf."             ;\
 451  $$e "           PAM is unlikely to work without this (and old-style"        ;\
 452  $$e "           password authentication will be used instead, which may"    ;\
 453  $$e "           or may not work.)"                                          ;\
 454  $$e "  ####################################################################";\
 455  $$e ""                                                                      ;\
 456           fi ;                                                          \
 457         fi
 458
 459 install-gnome:: screensaver-properties.desktop
 460         @lost=""                                                             ;\
 461          if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 462                                                                               \
 463            if [ ! -d "$(install_prefix)$(GNOME_CCDIR_1)" ]; then              \
 464              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR_1)"        ;\
 465                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR_1)"        ;\
 466            fi                                                                ;\
 467            if [ ! -d "$(install_prefix)$(GNOME_CCDIR_2)" ]; then              \
 468              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR_2)"        ;\
 469                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR_2)"        ;\
 470            fi                                                                ;\
 471            if [ ! -d "$(install_prefix)$(GNOME_CCDIR_3)" ]; then              \
 472              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR_3)"        ;\
 473                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR_3)"        ;\
 474            fi                                                                ;\
 475            if [ ! -d "$(install_prefix)$(GNOME_PANELDIR)" ]; then             \
 476              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_PANELDIR)"       ;\
 477                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_PANELDIR)"       ;\
 478            fi                                                                ;\
 479                                                                               \
 480            echo $(INSTALL_DATA) screensaver-properties.desktop                \
 481              $(install_prefix)$(GNOME_CCDIR_1)/screensaver-properties.desktop;\
 482                                                                               \
 483            if   $(INSTALL_DATA) screensaver-properties.desktop                \
 484              $(install_prefix)$(GNOME_CCDIR_1)/screensaver-properties.desktop;\
 485              then true                                                       ;\
 486            else                                                               \
 487              lost="$$lost $(install_prefix)$(GNOME_CCDIR_1)"                 ;\
 488            fi                                                                ;\
 489                                                                               \
 490            echo $(INSTALL_DATA) screensaver-properties.desktop                \
 491              $(install_prefix)$(GNOME_CCDIR_2)/screensaver-properties.desktop;\
 492                                                                               \
 493            if   $(INSTALL_DATA) screensaver-properties.desktop                \
 494              $(install_prefix)$(GNOME_CCDIR_2)/screensaver-properties.desktop;\
 495              then true                                                       ;\
 496            else                                                               \
 497              lost="$$lost $(install_prefix)$(GNOME_CCDIR_2)"                 ;\
 498            fi                                                                ;\
 499                                                                               \
 500            echo $(INSTALL_DATA) screensaver-properties.desktop                \
 501              $(install_prefix)$(GNOME_CCDIR_3)/screensaver-properties.desktop;\
 502                                                                               \
 503            if   $(INSTALL_DATA) screensaver-properties.desktop                \
 504              $(install_prefix)$(GNOME_CCDIR_3)/screensaver-properties.desktop;\
 505              then true                                                       ;\
 506            else                                                               \
 507              lost="$$lost $(install_prefix)$(GNOME_CCDIR_3)"                 ;\
 508            fi                                                                ;\
 509                                                                               \
 510            echo $(INSTALL_DATA) screensaver-properties.desktop                \
 511             $(install_prefix)$(GNOME_PANELDIR)/screensaver-properties.desktop;\
 512            if   $(INSTALL_DATA) screensaver-properties.desktop                \
 513             $(install_prefix)$(GNOME_PANELDIR)/screensaver-properties.desktop;\
 514              then true                                                       ;\
 515            else                                                               \
 516              lost="$$lost $(install_prefix)$(GNOME_PANELDIR)"                ;\
 517            fi                                                                ;\
 518                                                                               \
 519            if [ "$$lost" != "" ]; then                                        \
 520              e=echo ;                                                         \
 521  $$e ""                                                                      ;\
 522  $$e "  ####################################################################";\
 523  $$e "  Warning: unable to install screensaver-properties.desktop into:"     ;\
 524         set - $$lost                                                         ;\
 525         for f in $$@ ; do echo "             $$f/" ; done                    ;\
 526  $$e '           This means the "Screen Saver" section of the Gnome'         ;\
 527  $$e "           Control Center (gnomecc) may not work properly."            ;\
 528  $$e "  ####################################################################";\
 529  $$e ""                                                                      ;\
 530              exit 1 ;                                                         \
 531            fi                                                                ;\
 532          fi
 533
 534 install-gnome:: screensaver-properties-capplet
 535         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 536            if [ ! -d "$(install_prefix)$(GNOME_BINDIR)" ]; then               \
 537              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_BINDIR)"         ;\
 538                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_BINDIR)"         ;\
 539            fi                                                                ;\
 540            program=screensaver-properties-capplet                            ;\
 541            echo $(INSTALL_SCRIPT) $(srcdir)/$$program                         \
 542                   $(install_prefix)$(GNOME_BINDIR)/$$program                 ;\
 543            if   $(INSTALL_SCRIPT) $(srcdir)/$$program                         \
 544                   $(install_prefix)$(GNOME_BINDIR)/$$program                 ;\
 545              then true                                                       ;\
 546            else                                                               \
 547              e=echo ;                                                         \
 548  $$e ""                                                                      ;\
 549  $$e "  ####################################################################";\
 550  $$e "  Warning: unable to install $$program into"                           ;\
 551  $$e "           $(install_prefix)$(GNOME_BINDIR)/."                         ;\
 552  $$e "           Without this file, the Gnome session manager will not"      ;\
 553  $$e "           launch xscreensaver properly at login time."                ;\
 554  $$e "  ####################################################################";\
 555  $$e ""                                                                      ;\
 556              exit 1 ;                                                         \
 557            fi ;                                                               \
 558          fi
 559
 560 # xscreensaver.xpm
 561 # into /usr/share/pixmaps/
 562 install-gnome:: $(LOGO)
 563         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 564            if [ ! -d "$(install_prefix)$(GNOME_ICONDIR)" ]; then              \
 565              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_ICONDIR)"        ;\
 566                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_ICONDIR)"        ;\
 567            fi                                                                ;\
 568            target=xscreensaver.xpm                                           ;\
 569            echo $(INSTALL_DATA) $(LOGO)                                       \
 570                   $(install_prefix)$(GNOME_ICONDIR)/$$target                 ;\
 571                 $(INSTALL_DATA) $(LOGO)                                       \
 572                   $(install_prefix)$(GNOME_ICONDIR)/$$target                 ;\
 573         fi
 574
 575 # ../utils/images/screensaver-*.png
 576 # into /usr/share/xscreensaver/
 577 #
 578 # Should these really go in GLADE_DATADIR (/usr/share/xscreensaver/)
 579 # or should they instead go in GNOME_ICONDIR (/usr/share/pixmaps/)?
 580 # Does it matter?
 581 #
 582 install-gnome::
 583         @if [ "$(GLADE_DATADIR)" != "" ]; then                                \
 584            if [ ! -d "$(install_prefix)$(GLADE_DATADIR)" ]; then              \
 585              echo $(INSTALL_DIRS) "$(install_prefix)$(GLADE_DATADIR)"        ;\
 586                   $(INSTALL_DIRS) "$(install_prefix)$(GLADE_DATADIR)"        ;\
 587            fi                                                                ;\
 588            for target in $(GTK_ICONS) ; do                                    \
 589              dest=`echo $$target | sed 's@^.*/@@'`                           ;\
 590              echo $(INSTALL_DATA) $$target                                    \
 591                   $(install_prefix)$(GLADE_DATADIR)/$$dest                   ;\
 592                   $(INSTALL_DATA) $$target                                    \
 593                   $(install_prefix)$(GLADE_DATADIR)/$$dest                   ;\
 594            done                                                              ;\
 595         fi
 596
 597 # xscreensaver-demo.glade2
 598 # into /usr/share/xscreensaver/
 599 install-gnome:: xscreensaver-demo.glade2
 600         @if [ "$(GLADE_DATADIR)" != "" ]; then                                \
 601           if [ ! -d "$(install_prefix)$(GLADE_DATADIR)" ]; then               \
 602             echo $(INSTALL_DIRS) "$(install_prefix)$(GLADE_DATADIR)"         ;\
 603                  $(INSTALL_DIRS) "$(install_prefix)$(GLADE_DATADIR)"         ;\
 604           fi                                                                 ;\
 605           target=xscreensaver-demo.glade2                                    ;\
 606           echo $(INSTALL_DATA) $(srcdir)/$$target                             \
 607             $(install_prefix)$(GLADE_DATADIR)/$$target                       ;\
 608           if   $(INSTALL_DATA) $(srcdir)/$$target                             \
 609             $(install_prefix)$(GLADE_DATADIR)/$$target                       ;\
 610             then true                                                        ;\
 611           else                                                                \
 612             e=echo ;                                                          \
 613  $$e ""                                                                      ;\
 614  $$e "  ####################################################################";\
 615  $$e "  Warning: unable to install $$target into"                            ;\
 616  $$e "           $(install_prefix)$(GLADE_DATADIR)/."                        ;\
 617  $$e "           Without this file, xscreensaver-demo will not"              ;\
 618  $$e "           be able to run properly."                                   ;\
 619  $$e "  ####################################################################";\
 620  $$e ""                                                                      ;\
 621              exit 1 ;                                                         \
 622            fi ;                                                               \
 623          fi
 624
 625
 626 # screensaver-properties.desktop
 627 # into /usr/share/gnome/apps/Settings/Desktop/
 628 uninstall-gnome::
 629         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 630           f=screensaver-properties.desktop                                   ;\
 631           echo rm -f $(install_prefix)$(GNOME_CCDIR_1)/$$f                   ;\
 632                rm -f $(install_prefix)$(GNOME_CCDIR_1)/$$f                   ;\
 633           echo rm -f $(install_prefix)$(GNOME_CCDIR_2)/$$f                   ;\
 634                rm -f $(install_prefix)$(GNOME_CCDIR_2)/$$f                   ;\
 635           echo rm -f $(install_prefix)$(GNOME_CCDIR_3)/$$f                   ;\
 636                rm -f $(install_prefix)$(GNOME_CCDIR_3)/$$f                   ;\
 637           echo rm -f $(install_prefix)$(GNOME_PANELDIR)/$$f                  ;\
 638                rm -f $(install_prefix)$(GNOME_PANELDIR)/$$f                  ;\
 639         fi
 640
 641 # screensaver-properties-capplet
 642 # into /usr/X11R6/bin/
 643 uninstall-gnome::
 644         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 645           program=screensaver-properties-capplet                             ;\
 646           echo rm -f $(install_prefix)$(bindir)/$$program                    ;\
 647                rm -f $(install_prefix)$(bindir)/$$program                    ;\
 648          fi
 649
 650 # xscreensaver.xpm
 651 # into /usr/share/pixmaps/
 652 uninstall-gnome::
 653         @if [ "$(GNOME_ICONDIR)" != "" ]; then                                \
 654           target=xscreensaver.xpm                                            ;\
 655           echo rm -f $(install_prefix)$(GNOME_ICONDIR)/$$target              ;\
 656                rm -f $(install_prefix)$(GNOME_ICONDIR)/$$target              ;\
 657          fi
 658
 659 # ../utils/images/screensaver-*.png
 660 # into /usr/share/xscreensaver/
 661 uninstall-gnome::
 662         @if [ "$(GLADE_DATADIR)" != "" ]; then                                \
 663            for target in $(GTK_ICONS) ; do                                    \
 664              dest=`echo $$target | sed 's@^.*/@@'`                           ;\
 665              echo rm -f $(install_prefix)$(GLADE_DATADIR)/$$dest             ;\
 666                   rm -f $(install_prefix)$(GLADE_DATADIR)/$$dest             ;\
 667            done                                                              ;\
 668         fi
 669
 670 # xscreensaver.kss
 671 install-kde:
 672         @src="xscreensaver.kss" ;                                             \
 673         if [ "$$KDEDIR" != "" ]; then                                         \
 674           dir="$(install_prefix)$$KDEDIR/bin" ;                               \
 675           dest="$$dir/$$src" ;                                                \
 676           echo $(INSTALL_SCRIPT) $$src $$dest ;                               \
 677           if $(INSTALL_SCRIPT) $$src $$dest ; then                            \
 678             true ;                                                            \
 679           else                                                                \
 680             e=echo ;                                                          \
 681  $$e ""                                                                      ;\
 682  $$e "  ####################################################################";\
 683  $$e "  Warning: unable to install $$dest"                                   ;\
 684             if [ ! -d $(install_prefix)$$KDEDIR ]; then                       \
 685  $$e "           $(install_prefix)$$KDEDIR (\$$KDEDIR) does not exist."      ;\
 686             elif [ ! -d $(install_prefix)$$KDEDIR/bin ]; then                 \
 687  $$e "           $(install_prefix)$$KDEDIR/bin (\$$KDEDIR/bin) does not exist.";\
 688             elif [ -f $$dest ]; then                                          \
 689  $$e "           That file exists, and is unwritable."                       ;\
 690             else                                                              \
 691  $$e "           The directory is unwritable."                               ;\
 692             fi                                                               ;\
 693  $$e "  ####################################################################";\
 694  $$e ""                                                                      ;\
 695             exit 1 ;                                                          \
 696           fi ;                                                                \
 697         fi
 698
 699 uninstall-kde:
 700         @if [ "$$KDEDIR" != "" ]; then                                  \
 701           dest="$(install_prefix)$$KDEDIR/bin/xscreensaver.kss" ;       \
 702           echo rm -f $$dest ;                                           \
 703           rm -f $$dest ;                                                \
 704         fi
 705
 706 clean:
 707         -rm -f *.o a.out core $(EXES) $(EXES2) $(TEST_EXES) XScreenSaver_ad.h
 708
 709 distclean: clean
 710         -rm -f Makefile XScreenSaver.ad TAGS *~ "#"* screensaver-properties.desktop
 711
 712 # Adds all current dependencies to Makefile
 713 depend: XScreenSaver_ad.h
 714         $(DEPEND) -s '# DO NOT DELETE: updated by make depend'              \
 715         $(DEPEND_FLAGS) --                                                  \
 716         $(INCLUDES) $(DEFS) $(DEPEND_DEFINES) $(CFLAGS) $(X_CFLAGS) --      \
 717         $(SAVER_SRCS) $(CMD_SRCS) $(GETIMG_SRCS_1)
 718
 719 # Adds some dependencies to Makefile.in -- not totally accurate, but pretty
 720 # close.  This excludes dependencies on files in /usr/include, etc.  It tries
 721 # to include only dependencies on files which are themselves a part of this
 722 # package.
 723 distdepend: check_men update_ad_version update_man_version XScreenSaver_ad.h
 724         @echo updating dependencies in `pwd`/Makefile.in... ;               \
 725         $(DEPEND) -w 0 -f -                                                 \
 726         -s '# DO NOT DELETE: updated by make distdepend' $(DEPEND_FLAGS) -- \
 727         $(INCLUDES) -I$(ICON_SRC) $(DEFS) $(DEPEND_DEFINES)                 \
 728         $(CFLAGS) $(X_CFLAGS) --                                            \
 729         $(SAVER_SRCS_1) $(MOTIF_SRCS) $(GTK_SRCS) $(GETIMG_SRCS_1)          \
 730         $(PWENT_SRCS) $(LOCK_SRCS_1) $(DEMO_SRCS_1) $(CMD_SRCS)             \
 731         $(TEST_SRCS) 2>/dev/null |                                          \
 732         sort -d |                                                           \
 733         (                                                                   \
 734           awk '/^# .*Makefile.in ---/,/^# DO .*distdepend/' < Makefile.in ; \
 735           sed -e '/^#.*/d'                                                  \
 736               -e 's@ \./@ @g;s@ /[^ ]*@@g;/^.*:$$/d'                        \
 737               -e 's@\.\./utils@$$(UTILS_SRC)@g'                             \
 738               -e 's@ \([^$$]\)@ $$(srcdir)/\1@g'                            \
 739               -e 's@$$.*\(XScreenSaver_ad\)@\1@g'                           \
 740               -e 's@ $$(srcdir)/\(.*config\.h\)@ \1@g' ;                    \
 741           echo ''                                                           \
 742         ) > /tmp/distdepend.$$$$ &&                                         \
 743         mv Makefile.in Makefile.in.bak &&                                   \
 744         mv /tmp/distdepend.$$$$ Makefile.in
 745
 746 # Updates the version number in the app-defaults file to be in sync with
 747 # the version number in version.h.  This is so people can tell when they
 748 # have a version skew between the app-defaults file and the executable.
 749 # Also update hacks/config/README in the same way.
 750 update_ad_version::
 751         @files="XScreenSaver.ad.in ../hacks/config/README" ;                \
 752         U=$(UTILS_SRC)/version.h ;                                          \
 753         V=`sed -n 's/.*\([0-9][0-9]*\.[0-9]*\).*/\1/p' < $$U` ;             \
 754         D=`date '+%d-%b-%Y'` ;                                              \
 755         for S in $$files ; do                                               \
 756           echo -n "Updating $$S to $$V $$D... " ;                           \
 757           T=/tmp/xs.$$$$ ;                                                  \
 758           sed -e "s/\(.*version \)[0-9][0-9]*\.[0-9]*\(.*\)/\1$$V\2/"       \
 759               -e "s/\([0-9][0-9]-[A-Z][a-z][a-z]-[0-9][0-9][0-9]*\)/$$D/"   \
 760             < $$S > $$T ;                                                   \
 761           if cmp -s $$S $$T ; then                                          \
 762             echo "unchanged." ;                                             \
 763           else                                                              \
 764             cat $$T > $$S ;                                                 \
 765             echo "done." ;                                                  \
 766           fi ;                                                              \
 767         done ;                                                              \
 768         rm $$T
 769
 770 update_man_version::
 771         @for S in $(MEN); do                                                \
 772         U=$(UTILS_SRC)/version.h ;                                          \
 773         V=`sed -n 's/.*\([0-9][0-9]*\.[0-9]*\).*/\1/p' < $$U` ;             \
 774         V="`date '+%d-%b-%Y'` ($$V)" ;                                      \
 775         echo -n "Updating $$S to \"$$V\"... " ;                             \
 776         T=/tmp/xs.$$$$ ;                                                    \
 777         sed "s/^\(\.TH[^\"]*\)\"[^\"]*\"\(.*\)/\1\"$$V\"\2/"                \
 778           < $$S > $$T ;                                                     \
 779         if cmp -s $$S $$T ; then                                            \
 780           echo "unchanged." ;                                               \
 781         else                                                                \
 782           cat $$T > $$S ;                                                   \
 783           echo "done." ;                                                    \
 784         fi ;                                                                \
 785         rm $$T ;                                                            \
 786         done
 787
 788 TAGS: tags
 789 tags:
 790         find $(srcdir) -name '*.[chly]' -print | xargs etags -a
 791
 792 echo_tarfiles:
 793         @$(MAKE) XScreenSaver_ad.h 2>&1 >&- /dev/null
 794         @echo $(TARFILES)
 795
 796 check_men:
 797         @badmen="" ;                                                    \
 798          for exe in $(EXES); do                                         \
 799            if ! [ -f $(srcdir)/$$exe.man ]; then                        \
 800              badmen="$$badmen $$exe" ;                                  \
 801            fi ;                                                         \
 802          done ;                                                         \
 803          if [ -n "$$badmen" ]; then                                     \
 804            echo "" ;                                                    \
 805            echo "Warning: The following programs have no manuals:" ;    \
 806            echo "" ;                                                    \
 807            for m in $$badmen ; do                                       \
 808              echo "    $$m" ;                                           \
 809            done ;                                                       \
 810            echo "" ;                                                    \
 811          fi
 812
 813
 814 # Rules for noticing when the objects from the utils directory are out of
 815 # date with respect to their sources, and going and building them according
 816 # to the rules in their own Makefile...
 817 #
 818 $(UTILS_BIN)/fade.o:            $(UTILS_SRC)/fade.c
 819 $(UTILS_BIN)/overlay.o:         $(UTILS_SRC)/overlay.c
 820 $(UTILS_BIN)/resources.o:       $(UTILS_SRC)/resources.c
 821 $(UTILS_BIN)/usleep.o:          $(UTILS_SRC)/usleep.c
 822 $(UTILS_BIN)/visual.o:          $(UTILS_SRC)/visual.c
 823 $(UTILS_BIN)/xmu.o:             $(UTILS_SRC)/xmu.c
 824 $(UTILS_BIN)/logo.o:            $(UTILS_SRC)/logo.c
 825 $(UTILS_BIN)/yarandom.o:        $(UTILS_SRC)/yarandom.c
 826 $(UTILS_BIN)/colorbars.o:       $(UTILS_SRC)/colorbars.c
 827
 828 $(SAVER_UTIL_OBJS):
 829         cd $(UTILS_BIN) ; \
 830         $(MAKE) $(@F) CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"
 831
 832 # How we build object files in this directory.
 833 .c.o:
 834         $(CC) -c $(INCLUDES) $(DEFS)  $(CFLAGS) $(X_CFLAGS) $<
 835
 836 # subprocs takes an extra -D option.
 837 subprocs.o: subprocs.c
 838         $(CC) -c $(INCLUDES) $(SUBP_DEFS) $(CFLAGS) $(X_CFLAGS) \
 839           $(srcdir)/subprocs.c
 840
 841 # demo-Gtk takes extra -D options, and an extra -I option.
 842 demo-Gtk.o: demo-Gtk.c
 843         $(CC) -c $(INCLUDES) $(SUBP_DEFS) -I$(ICON_SRC) \
 844           $(GTK_DEFS) $(INTL_DEFS) $(CFLAGS) $(X_CFLAGS) \
 845           $(srcdir)/demo-Gtk.c
 846
 847 # demo-Gtk-conf takes an extra -D option.
 848 demo-Gtk-conf.o: demo-Gtk-conf.c
 849         $(CC) -c $(INCLUDES) $(CONF_DEFS) $(GTK_DEFS) $(CFLAGS) $(X_CFLAGS) \
 850           $(srcdir)/demo-Gtk-conf.c
 851
 852
 853 # How we build the default app-defaults file into the program.
 854 #
 855 XScreenSaver_ad.h: XScreenSaver.ad
 856         $(SHELL) $(UTILS_SRC)/ad2c XScreenSaver.ad > XScreenSaver_ad.h
 857
 858 @INTLTOOL_DESKTOP_RULE@
 859
 860 # The executables linked in this directory.
 861 #
 862 xscreensaver: $(SAVER_OBJS)
 863         $(CC) $(LDFLAGS) -o $@ $(SAVER_OBJS) $(SAVER_LIBS)
 864
 865 xscreensaver-command: $(CMD_OBJS)
 866         $(CC) $(LDFLAGS) -o $@ $(CMD_OBJS) $(CMD_LIBS)
 867
 868
 869 xscreensaver-demo: @PREFERRED_DEMO_PROGRAM@
 870         @if [ "@PREFERRED_DEMO_PROGRAM@" = "" ]; then                   \
 871           echo "WARNING: neither GTK nor Motif are available,"          \
 872                "therefore no xscreensaver-demo!"                      ; \
 873           rm -f $@@EXEEXT@                                            ; \
 874         else                                                            \
 875           echo cp -p @PREFERRED_DEMO_PROGRAM@@EXEEXT@ $@@EXEEXT@      ; \
 876                cp -p @PREFERRED_DEMO_PROGRAM@@EXEEXT@ $@@EXEEXT@      ; \
 877         fi
 878
 879 xscreensaver-demo-Xm: $(DEMO_OBJS) $(MOTIF_OBJS)
 880         $(CC) $(LDFLAGS) -o $@ $(DEMO_OBJS) $(MOTIF_OBJS) $(LIBS) $(X_LIBS) \
 881         $(MOTIF_LIBS) $(INTL_LIBS) $(X_PRE_LIBS) -lXt -lX11 \
 882         $(XDPMS_LIBS) -lXext $(X_EXTRA_LIBS)
 883
 884 xscreensaver-demo-Gtk: $(DEMO_OBJS) $(GTK_OBJS)
 885         $(CC) $(LDFLAGS) -o $@ $(DEMO_OBJS) $(GTK_OBJS) $(LIBS) $(X_LIBS) \
 886         $(GTK_LIBS) $(XML_LIBS) $(INTL_LIBS) $(X_PRE_LIBS) -lXt -lX11 \
 887         $(XDPMS_LIBS) -lXext $(X_EXTRA_LIBS)
 888
 889 xscreensaver-getimage: $(GETIMG_OBJS)
 890         $(CC) $(LDFLAGS) -o $@ $(GETIMG_OBJS) $(GETIMG_LIBS) -lm
 891
 892
 893 TEST_PASSWD_OBJS = test-passwd.o $(LOCK_OBJS_1) $(PASSWD_OBJS) \
 894          subprocs.o setuid.o splash.o prefs.o \
 895         $(SAVER_UTIL_OBJS)
 896 test-passwd.o: XScreenSaver_ad.h
 897
 898 test-passwd: $(TEST_PASSWD_OBJS) XScreenSaver_ad.h
 899         $(CC) $(LDFLAGS) -o $@ $(TEST_PASSWD_OBJS) $(SAVER_LIBS)
 900
 901 test-uid: test-uid.o
 902         $(CC) $(LDFLAGS) -o $@ test-uid.o
 903
 904 test-xdpms: test-xdpms.o
 905         $(CC) $(LDFLAGS) -o $@ test-xdpms.o $(LIBS) $(X_LIBS) $(XDPMS_LIBS) \
 906         $(X_PRE_LIBS) -lXt -lX11 -lXext $(X_EXTRA_LIBS)
 907
 908 test-xinerama: test-xinerama.o
 909         $(CC) $(LDFLAGS) -o $@ test-xinerama.o $(LIBS) $(X_LIBS) $(SAVER_LIBS)\
 910         $(X_PRE_LIBS) -lXt -lX11 -lXext $(X_EXTRA_LIBS)
 911
 912 test-grab: test-grab.o
 913         $(CC) $(LDFLAGS) -o $@ test-grab.o $(SAVER_LIBS)
 914
 915 test-apm: test-apm.o
 916         $(CC) $(LDFLAGS) -o $@ test-apm.o $(SAVER_LIBS) -lapm
 917
 918 TEST_FADE_OBJS = test-fade.o $(UTILS_SRC)/fade.o $(DEMO_UTIL_OBJS)
 919 test-fade: test-fade.o $(UTILS_BIN)/fade.o
 920         $(CC) $(LDFLAGS) -o $@ $(TEST_FADE_OBJS) $(SAVER_LIBS)
 921
 922
 923 xdpyinfo.o: xdpyinfo.c
 924         $(CC) -c $(INCLUDES) -DHAVE_GLX $(CFLAGS) $(X_CFLAGS) \
 925           $(srcdir)/xdpyinfo.c
 926
 927 xdpyinfo: xdpyinfo.o
 928         $(CC) $(LDFLAGS) -o $@ xdpyinfo.o \
 929                 $(LIBS) $(X_LIBS) @GL_LIBS@ \
 930                 $(X_PRE_LIBS) -lX11 -lXext $(X_EXTRA_LIBS) -lm
 931
 932
 933 ##############################################################################
 934 #
 935 # DO NOT DELETE: updated by make distdepend
 936
 937 demo-Gtk-conf.o: ../config.h
 938 demo-Gtk-conf.o: $(srcdir)/demo-Gtk-conf.h
 939 demo-Gtk.o: ../config.h
 940 demo-Gtk.o: $(srcdir)/demo-Gtk-conf.h
 941 demo-Gtk.o: $(srcdir)/demo-Gtk-support.h
 942 demo-Gtk.o: $(srcdir)/demo-Gtk-widgets.h
 943 demo-Gtk.o: $(srcdir)/prefs.h
 944 demo-Gtk.o: $(srcdir)/remote.h
 945 demo-Gtk.o: XScreenSaver_ad.h
 946 demo-Gtk-support.o: ../config.h
 947 demo-Gtk-support.o: $(srcdir)/demo-Gtk-support.h
 948 demo-Gtk-widgets.o: ../config.h
 949 demo-Gtk-widgets.o: $(srcdir)/demo-Gtk-stubs.h
 950 demo-Gtk-widgets.o: $(srcdir)/demo-Gtk-support.h
 951 demo-Gtk-widgets.o: $(srcdir)/demo-Gtk-widgets.h
 952 demo-Xm.o: ../config.h
 953 demo-Xm-widgets.o: ../config.h
 954 dpms.o: ../config.h
 955 dpms.o: $(srcdir)/prefs.h
 956 dpms.o: $(srcdir)/xscreensaver.h
 957 exec.o: ../config.h
 958 lock.o: ../config.h
 959 lock.o: $(srcdir)/prefs.h
 960 lock.o: $(srcdir)/xscreensaver.h
 961 passwd.o: ../config.h
 962 passwd-pwent.o: ../config.h
 963 prefs.o: ../config.h
 964 prefs.o: $(srcdir)/prefs.h
 965 remote.o: ../config.h
 966 remote.o: $(srcdir)/remote.h
 967 setuid.o: ../config.h
 968 setuid.o: $(srcdir)/prefs.h
 969 setuid.o: $(srcdir)/xscreensaver.h
 970 splash.o: ../config.h
 971 splash.o: $(srcdir)/prefs.h
 972 splash.o: $(srcdir)/xscreensaver.h
 973 stderr.o: ../config.h
 974 stderr.o: $(srcdir)/prefs.h
 975 stderr.o: $(srcdir)/xscreensaver.h
 976 subprocs.o: ../config.h
 977 subprocs.o: $(srcdir)/prefs.h
 978 subprocs.o: $(srcdir)/xscreensaver.h
 979 test-apm.o: ../config.h
 980 test-fade.o: ../config.h
 981 test-fade.o: $(srcdir)/prefs.h
 982 test-fade.o: $(srcdir)/xscreensaver.h
 983 test-grab.o: ../config.h
 984 test-passwd.o: ../config.h
 985 test-passwd.o: $(srcdir)/prefs.h
 986 test-passwd.o: XScreenSaver_ad.h
 987 test-passwd.o: $(srcdir)/xscreensaver.h
 988 test-uid.o: ../config.h
 989 test-xdpms.o: ../config.h
 990 test-xinerama.o: ../config.h
 991 timers.o: ../config.h
 992 timers.o: $(srcdir)/prefs.h
 993 timers.o: $(srcdir)/xscreensaver.h
 994 windows.o: ../config.h
 995 windows.o: $(srcdir)/prefs.h
 996 windows.o: $(srcdir)/xscreensaver.h
 997 xscreensaver-command.o: ../config.h
 998 xscreensaver-command.o: $(srcdir)/remote.h
 999 xscreensaver-getimage.o: ../config.h
1000 xscreensaver-getimage.o: XScreenSaver_ad.h
1001 xscreensaver-getimage.o: $(srcdir)/prefs.h
1002 xscreensaver.o: ../config.h
1003 xscreensaver.o: $(srcdir)/prefs.h
1004 xscreensaver.o: XScreenSaver_ad.h
1005 xscreensaver.o: $(srcdir)/xscreensaver.h
1006 xset.o: ../config.h
1007 xset.o: $(srcdir)/prefs.h
1008 xset.o: $(srcdir)/xscreensaver.h
1009