git.hungrycats.org Git - xscreensaver/blob - driver/Makefile.in

   1 # driver/Makefile.in --- xscreensaver, Copyright (c) 1997-1999 Jamie Zawinski.
   2 # the `../configure' script generates `driver/Makefile' from this file.
   3
   4 @SET_MAKE@
   5 .SUFFIXES:
   6 .SUFFIXES: .c .o
   7
   8 srcdir          = @srcdir@
   9 VPATH           = @srcdir@
  10 top_srcdir      = @top_srcdir@
  11 top_builddir    = ..
  12
  13 install_prefix  =
  14 prefix          = @prefix@
  15 exec_prefix     = @exec_prefix@
  16 bindir          = @bindir@
  17 mandir          = @mandir@
  18 man1dir         = $(mandir)/man1
  19 mansuffix       = 1
  20 datadir         = @datadir@
  21 localedir       = $(datadir)/locale
  22
  23 INTLTOOL_MERGE  = @INTLTOOL_MERGE@
  24
  25 GNOME_DATADIR   = @GNOME_DATADIR@
  26 GNOME_CCDIR     = $(GNOME_DATADIR)/control-center/Desktop
  27 GNOME_PANELDIR  = $(GNOME_DATADIR)/gnome/apps/Settings/Desktop
  28 GNOME_BINDIR    = $(bindir)
  29 HACK_CONF_DIR   = @HACK_CONF_DIR@
  30 GTK_ICONDIR     = @GTK_ICONDIR@
  31
  32 CC              = @CC@
  33 CFLAGS          = @CFLAGS@
  34 LDFLAGS         = @LDFLAGS@
  35 DEFS            = @DEFS@
  36 INTL_DEFS       = -DLOCALEDIR=\"$(localedir)\"
  37 SUBP_DEFS       = $(DEFS) -DDEFAULT_PATH_PREFIX='"@HACKDIR@"'
  38 GTK_DEFS        = $(DEFS) -DDEFAULT_ICONDIR='"$(GTK_ICONDIR)"'
  39 CONF_DEFS       = -DHACK_CONFIGURATION_PATH='"$(HACK_CONF_DIR)"'
  40
  41 LIBS            = @LIBS@
  42 INTL_LIBS       = @INTLLIBS@
  43 PERL            = @PERL@
  44
  45 DEPEND          = @DEPEND@
  46 DEPEND_FLAGS    = @DEPEND_FLAGS@
  47 DEPEND_DEFINES  = @DEPEND_DEFINES@
  48
  49 SHELL           = /bin/sh
  50 INSTALL         = @INSTALL@
  51 SUID_FLAGS      = -o root -m 4755
  52 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  53 INSTALL_SCRIPT  = @INSTALL_SCRIPT@
  54 INSTALL_SETUID  = @INSTALL_SETUID@
  55 INSTALL_DATA    = @INSTALL_DATA@
  56 INSTALL_DIRS    = @INSTALL_DIRS@
  57
  58 X_CFLAGS        = @X_CFLAGS@
  59 X_LIBS          = @X_LIBS@
  60 X_PRE_LIBS      = @X_PRE_LIBS@
  61 X_EXTRA_LIBS    = @X_EXTRA_LIBS@
  62 XMU_LIBS        = @XMU_LIBS@
  63
  64 # Note:
  65 #
  66 # X_LIBS would more properly be called X_LDFLAGS (it contains the -L args.)
  67 # X_PRE_LIBS contains extra libraries you have to link against on some systems,
  68 #         and that must come before -lX11.  (e.g., -lSM and -lICE.)
  69 # X_EXTRA_LIBS contains extra libraries needed by X that aren't a part of X.
  70 #         (e.g., -lsocket, -lnsl, etc.)
  71 #
  72 # I think (but am not totally sure) that LIBS is also really "LDFLAGS".
  73 #
  74 # SAVER_LIBS is the link line for "xscreensaver", and
  75 # CMD_LIBS is the link line for "xscreensaver-command".
  76 # GETIMG_LIBS is the link line for "xscreensaver-getimage".
  77
  78
  79 AD_DIR          = @APPDEFAULTS@
  80 PAM_DIR         = /etc/pam.d
  81 PAM_CONF        = /etc/pam.conf
  82
  83 UTILS_SRC       = $(srcdir)/../utils
  84 UTILS_BIN       = ../utils
  85
  86 INCLUDES        = -I. -I$(srcdir) -I$(UTILS_SRC) -I.. @INCLUDES@
  87
  88 MOTIF_SRCS      = demo-Xm.c demo-Xm-widgets.c
  89 MOTIF_OBJS      = demo-Xm.o demo-Xm-widgets.o
  90
  91 GTK_SRCS        = demo-Gtk.c demo-Gtk-conf.c \
  92                   demo-Gtk-widgets.c demo-Gtk-support.c
  93 GTK_OBJS        = demo-Gtk.o demo-Gtk-conf.o \
  94                   demo-Gtk-widgets.o demo-Gtk-support.o
  95
  96 PWENT_SRCS      = passwd-pwent.c
  97 PWENT_OBJS      = passwd-pwent.o
  98
  99 KERBEROS_SRCS   = passwd-kerberos.c
 100 KERBEROS_OBJS   = passwd-kerberos.o
 101
 102 PAM_SRCS        = passwd-pam.c
 103 PAM_OBJS        = passwd-pam.o
 104
 105 LOCK_SRCS_1     = lock.c passwd.c
 106 LOCK_OBJS_1     = lock.o passwd.o
 107 NOLOCK_SRCS_1   = lock.c
 108 NOLOCK_OBJS_1   = lock.o
 109
 110 TEST_SRCS       = test-passwd.c test-uid.c test-xdpms.c test-grab.c \
 111                   test-apm.c test-fade.c xdpyinfo.c
 112 TEST_EXES       = test-passwd   test-uid   test-xdpms   test-grab \
 113                   test-apm   test-fade   xdpyinfo
 114
 115 MOTIF_LIBS      = @MOTIF_LIBS@ @XPM_LIBS@ $(XMU_LIBS)
 116 GTK_LIBS        = @GTK_LIBS@ $(XMU_LIBS)
 117 XML_LIBS        = @XML_LIBS@
 118
 119 XDPMS_LIBS      = @XDPMS_LIBS@
 120
 121 PASSWD_SRCS     = @PASSWD_SRCS@
 122 PASSWD_OBJS     = @PASSWD_OBJS@
 123 PASSWD_LIBS     = @PASSWD_LIBS@
 124
 125 LOCK_SRCS       = @LOCK_SRCS@
 126 LOCK_OBJS       = @LOCK_OBJS@
 127
 128 XMU_SRCS        = @XMU_SRCS@
 129 XMU_OBJS        = @XMU_OBJS@
 130
 131 GL_SRCS         = @SAVER_GL_SRCS@
 132 GL_OBJS         = @SAVER_GL_OBJS@
 133 GL_LIBS         = @SAVER_GL_LIBS@
 134
 135 ICON_SRC        = $(UTILS_SRC)/images
 136 LOGO            = $(ICON_SRC)/logo-50.xpm
 137 GTK_ICONS       = $(ICON_SRC)/screensaver-*.xpm
 138
 139 DEMO_UTIL_SRCS  = $(UTILS_SRC)/resources.c $(UTILS_SRC)/usleep.c \
 140                   $(UTILS_SRC)/visual.c
 141 DEMO_UTIL_OBJS  = $(UTILS_BIN)/resources.o $(UTILS_BIN)/usleep.o \
 142                   $(UTILS_BIN)/visual.o
 143
 144 SAVER_UTIL_SRCS = $(UTILS_SRC)/fade.c $(UTILS_SRC)/overlay.c \
 145                   $(UTILS_SRC)/logo.c $(UTILS_SRC)/yarandom.c \
 146                   $(DEMO_UTIL_SRCS)
 147 SAVER_UTIL_OBJS = $(UTILS_BIN)/fade.o $(UTILS_BIN)/overlay.o \
 148                   $(UTILS_BIN)/logo.o $(UTILS_BIN)/yarandom.o \
 149                   $(DEMO_UTIL_OBJS)
 150
 151 GETIMG_SRCS_1   = xscreensaver-getimage.c
 152 GETIMG_OBJS_1   = xscreensaver-getimage.o
 153
 154 GETIMG_SRCS     = $(GETIMG_SRCS_1) \
 155                   $(UTILS_SRC)/colorbars.o $(UTILS_SRC)/resources.o \
 156                   $(UTILS_SRC)/yarandom.o $(UTILS_SRC)/visual.o \
 157                   $(UTILS_SRC)/usleep.o $(UTILS_SRC)/hsv.o \
 158                   $(UTILS_SRC)/colors.o $(UTILS_SRC)/grabscreen.o \
 159                   $(UTILS_SRC)/logo.o prefs.o $(XMU_SRCS)
 160
 161 GETIMG_OBJS     = $(GETIMG_OBJS_1) \
 162                   $(UTILS_BIN)/colorbars.o $(UTILS_BIN)/resources.o \
 163                   $(UTILS_BIN)/yarandom.o $(UTILS_BIN)/visual.o \
 164                   $(UTILS_BIN)/usleep.o $(UTILS_BIN)/hsv.o \
 165                   $(UTILS_BIN)/colors.o $(UTILS_BIN)/grabscreen.o \
 166                   $(UTILS_BIN)/logo.o prefs.o $(XMU_OBJS)
 167
 168 SAVER_SRCS_1    = xscreensaver.c windows.c timers.c subprocs.c exec.c \
 169                   xset.c splash.c setuid.c stderr.c
 170 SAVER_OBJS_1    = xscreensaver.o windows.o timers.o subprocs.o exec.o \
 171                   xset.o splash.o setuid.o stderr.o
 172
 173 SAVER_SRCS      = $(SAVER_SRCS_1) prefs.c dpms.c $(LOCK_SRCS) \
 174                   $(SAVER_UTIL_SRCS) $(GL_SRCS) $(XMU_SRCS)
 175 SAVER_OBJS      = $(SAVER_OBJS_1) prefs.o dpms.o $(LOCK_OBJS) \
 176                   $(SAVER_UTIL_OBJS) $(GL_OBJS) $(XMU_OBJS)
 177
 178 CMD_SRCS        = remote.c xscreensaver-command.c
 179 CMD_OBJS        = remote.o xscreensaver-command.o
 180
 181 DEMO_SRCS_1     = prefs.c dpms.c $(XMU_SRCS)
 182 DEMO_OBJS_1     = prefs.o dpms.o $(XMU_OBJS)
 183
 184 DEMO_SRCS       = prefs.c dpms.c remote.c exec.c $(DEMO_UTIL_SRCS)
 185 DEMO_OBJS       = prefs.o dpms.o remote.o exec.o $(DEMO_UTIL_OBJS)
 186
 187 SAVER_LIBS      = $(LIBS) $(X_LIBS) $(XMU_LIBS) @SAVER_LIBS@ \
 188                   $(XDPMS_LIBS) $(GL_LIBS) $(X_PRE_LIBS) \
 189                   -lXt -lX11 -lXext $(X_EXTRA_LIBS) \
 190                   $(PASSWD_LIBS)
 191
 192 CMD_LIBS        = $(LIBS) $(X_LIBS) \
 193                   $(X_PRE_LIBS) -lX11 -lXext $(X_EXTRA_LIBS)
 194
 195 GETIMG_LIBS     = $(LIBS) $(X_LIBS) \
 196                   $(X_PRE_LIBS) -lXt -lX11 $(XMU_LIBS) -lXext $(X_EXTRA_LIBS)
 197
 198 EXES            = xscreensaver xscreensaver-command xscreensaver-demo \
 199                   xscreensaver-getimage
 200 EXES2           = @ALL_DEMO_PROGRAMS@
 201 SCRIPTS         = xscreensaver-getimage-file xscreensaver-getimage-video
 202
 203 HDRS            = XScreenSaver_ad.h xscreensaver.h prefs.h remote.h \
 204                   demo-Gtk-widgets.h demo-Gtk-stubs.h demo-Gtk-support.h \
 205                   demo-Gtk-conf.h
 206 MEN             = xscreensaver.man xscreensaver-demo.man \
 207                   xscreensaver-command.man \
 208                   xscreensaver-getimage.man \
 209                   xscreensaver-getimage-file.man \
 210                   xscreensaver-getimage-video.man
 211 EXTRAS          = README Makefile.in XScreenSaver.ad.in xscreensaver.pam \
 212                   xscreensaver.kss xscreensaver-demo.glade \
 213                   screensaver-properties.desktop.in \
 214                   screensaver-properties-capplet \
 215                   .gdbinit
 216 VMSFILES        = compile_axp.com compile_decc.com link_axp.com link_decc.com \
 217                   vms-getpwnam.c vms-pwd.h vms-hpwd.c vms-validate.c \
 218                   vms_axp.opt vms_axp_12.opt vms_decc.opt vms_decc_12.opt
 219
 220 TARFILES        = $(EXTRAS) $(VMSFILES) $(SAVER_SRCS_1) \
 221                   $(MOTIF_SRCS) $(GTK_SRCS) $(PWENT_SRCS) \
 222                   $(KERBEROS_SRCS) $(PAM_SRCS) $(LOCK_SRCS_1) $(DEMO_SRCS_1) \
 223                   $(CMD_SRCS) $(GETIMG_SRCS_1) $(HDRS) $(SCRIPTS) \
 224                   $(TEST_SRCS) $(MEN)
 225
 226
 227 default: $(EXES)
 228 all: $(EXES) $(EXES2)
 229 tests: $(TEST_EXES)
 230
 231 install:   install-program   install-ad    install-scripts \
 232            install-gnome     install-kde   install-man   @INSTALL_PAM@
 233 uninstall: uninstall-program uninstall-ad  \
 234            uninstall-gnome   uninstall-kde uninstall-man
 235
 236 install-strip:
 237         $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
 238                 install
 239
 240 install-program: $(EXES)
 241         @if [ ! -d $(install_prefix)$(bindir) ]; then                   \
 242           $(INSTALL_DIRS) $(install_prefix)$(bindir) ;                  \
 243          fi
 244         @inst="$(INSTALL_PROGRAM)" ;                                    \
 245         if [ @NEED_SETUID@ = yes ]; then                                \
 246            me=`PATH="$$PATH:/usr/ucb" whoami` ;                         \
 247            if [ "$$me" = root ]; then                                   \
 248              inst="$(INSTALL_SETUID)" ;                                 \
 249            else                                                         \
 250             e=echo ;                                                    \
 251  $$e ""                                                                      ;\
 252  $$e "  ####################################################################";\
 253  $$e "  Warning: xscreensaver has been compiled with support for shadow"     ;\
 254  $$e "           passwords.  If your system actually uses shadow passwords," ;\
 255  $$e "           then xscreensaver must be installed as a setuid root"       ;\
 256  $$e "           program in order for locking to work.  To do this, you"     ;\
 257  $$e "           must run 'make install' as 'root', not as '$$me'."          ;\
 258  $$e ""                                                                      ;\
 259  $$e "           For now, xscreensaver will be installed non-setuid, which"  ;\
 260  $$e "           means that locking might not work.  (Try it and see.)"      ;\
 261  $$e "  ####################################################################";\
 262  $$e ""                                                                      ;\
 263            fi ;                                                               \
 264         fi ;                                                                  \
 265         echo $$inst xscreensaver $(install_prefix)$(bindir)/xscreensaver ;    \
 266         $$inst xscreensaver $(install_prefix)$(bindir)/xscreensaver
 267         @echo $(INSTALL_PROGRAM) xscreensaver-command \
 268           $(install_prefix)$(bindir)/xscreensaver-command ; \
 269         $(INSTALL_PROGRAM) xscreensaver-command \
 270           $(install_prefix)$(bindir)/xscreensaver-command
 271         @echo $(INSTALL_PROGRAM) xscreensaver-demo \
 272           $(install_prefix)$(bindir)/xscreensaver-demo ; \
 273         $(INSTALL_PROGRAM) xscreensaver-demo \
 274           $(install_prefix)$(bindir)/xscreensaver-demo
 275         @echo $(INSTALL_PROGRAM) xscreensaver-getimage \
 276           $(install_prefix)$(bindir)/xscreensaver-getimage ; \
 277         $(INSTALL_PROGRAM) xscreensaver-getimage \
 278           $(install_prefix)$(bindir)/xscreensaver-getimage
 279
 280 install-ad: XScreenSaver.ad
 281         @if [ ! -d $(install_prefix)$(AD_DIR) ]; then                         \
 282           $(INSTALL_DIRS) $(install_prefix)$(AD_DIR) ;                        \
 283          fi
 284         @-echo $(INSTALL_DATA) XScreenSaver.ad                                \
 285           $(install_prefix)$(AD_DIR)/XScreenSaver ;                           \
 286         if $(INSTALL_DATA) XScreenSaver.ad                                    \
 287           $(install_prefix)$(AD_DIR)/XScreenSaver ; then                      \
 288           true ;                                                              \
 289         else                                                                  \
 290           e=echo ;                                                            \
 291           if [ -f $(install_prefix)$(AD_DIR)/XScreenSaver ]; then             \
 292  $$e ""                                                                      ;\
 293  $$e "  ####################################################################";\
 294  $$e "  Warning: unable to install $(install_prefix)$(AD_DIR)/XScreenSaver"  ;\
 295  $$e "           That file exists, and is unwritable.  It is probably from"  ;\
 296  $$e "           an older version of xscreensaver, and could cause things"   ;\
 297  $$e "           to malfunction.  Please delete it!"                         ;\
 298  $$e "  ####################################################################";\
 299  $$e ""                                                                      ;\
 300             exit 1 ;                                                          \
 301           else                                                                \
 302  $$e ""                                                                      ;\
 303  $$e "  ####################################################################";\
 304  $$e "  Warning: unable to install $(install_prefix)$(AD_DIR)/XScreenSaver"  ;\
 305  $$e "           The directory is unwritable.  This is probably ok;"         ;\
 306  $$e "           xscreensaver should work without that file."                ;\
 307  $$e "  ####################################################################";\
 308  $$e ""                                                                      ;\
 309             exit 0 ;                                                          \
 310           fi                                                                  \
 311         fi
 312
 313 install-scripts: $(SCRIPTS) munge-scripts
 314         @for program in $(SCRIPTS); do                                  \
 315           if [ -r $$program ] ; then                                    \
 316             p=$$program ;                                               \
 317           else                                                          \
 318             p=$(srcdir)/$$program ;                                     \
 319           fi ;                                                          \
 320           echo $(INSTALL_SCRIPT) $$p                                    \
 321             $(install_prefix)$(bindir)/$$program ;                      \
 322           $(INSTALL_SCRIPT) $$p                                         \
 323             $(install_prefix)$(bindir)/$$program ;                      \
 324         done
 325
 326 munge-scripts: $(SCRIPTS)
 327         @tmp=/tmp/mf.$$$$ ;                                             \
 328         perl="${PERL}" ;                                                \
 329         rm -f $$tmp ;                                                   \
 330         for program in $(SCRIPTS); do                                   \
 331           echo "adjusting location of perl in $$program..." ;           \
 332           sed "s@^\(#!\)\(/[^ ]*/perl[^ ]*\)\(.*\)\$$@\1$$perl\3@"      \
 333               < $(srcdir)/$$program > $$tmp ;                           \
 334           if cmp -s $(srcdir)/$$program $$tmp ; then                    \
 335             true ;                                                      \
 336           else                                                          \
 337             cat $$tmp > ./$$program ;                                   \
 338           fi ;                                                          \
 339         done ;                                                          \
 340         rm -f $$tmp
 341
 342 install-man: $(MEN)
 343         @men="$(MEN)" ;                                                 \
 344         if [ ! -d $(install_prefix)$(man1dir) ]; then                   \
 345           $(INSTALL_DIRS) $(install_prefix)$(man1dir) ;                 \
 346          fi ;                                                           \
 347         for man in $$men; do                                            \
 348           instname=`echo $$man | sed 's/\.man$$/\.$(mansuffix)/'` ;     \
 349           echo $(INSTALL_DATA) $(srcdir)/$$man                          \
 350            $(install_prefix)$(man1dir)/$$instname ;                     \
 351           $(INSTALL_DATA) $(srcdir)/$$man                               \
 352             $(install_prefix)$(man1dir)/$$instname ;                    \
 353         done
 354
 355 uninstall-program:
 356         @for program in $(EXES) $(SCRIPTS); do                          \
 357           echo rm -f $(install_prefix)$(bindir)/$$program ;             \
 358           rm -f $(install_prefix)$(bindir)/$$program ;                  \
 359         done
 360
 361 uninstall-ad:
 362         rm -f $(install_prefix)$(AD_DIR)/XScreenSaver
 363
 364 uninstall-man:
 365         @men="$(MEN)" ;                                                 \
 366         for man in $$men; do                                            \
 367           instname=`echo $$man | sed 's/\.man$$/\.$(mansuffix)/'` ;     \
 368           echo rm -f $(install_prefix)$(man1dir)/$$instname ;           \
 369           rm -f $(install_prefix)$(man1dir)/$$instname ;                \
 370         done
 371
 372 install-pam:
 373         @src="$(srcdir)/xscreensaver.pam" ;                             \
 374         dest=`sed -n 's/.*PAM_SERVICE_NAME[     ]*"\([^"]*\)".*$$/\1/p' \
 375            < ../config.h` ;                                             \
 376         dir="$(install_prefix)$(PAM_DIR)" ;                             \
 377         conf="$(PAM_CONF)" ;                                            \
 378                                                                         \
 379         if [ -d $$dir ] ; then                                          \
 380                                                                         \
 381           if [ -f $$dir/xdm ]; then                                     \
 382             src2=$$dir/xdm ;                                            \
 383           elif [ -f $$dir/login ]; then                                 \
 384             src2=$$dir/login ;                                          \
 385           fi ;                                                          \
 386                                                                         \
 387           if [ -z "$$src2" ]; then                                      \
 388             echo $(INSTALL_DATA) $$src $$dir/$$dest ;                   \
 389             $(INSTALL_DATA) $$src $$dir/$$dest ;                        \
 390           else                                                          \
 391             src="xscreensaver.pam.$$$$" ;                               \
 392             echo "grep '^#%\|^auth' $$src2 > $$src" ;                   \
 393                   grep '^#%\|^auth' $$src2 > $$src ;                    \
 394             echo $(INSTALL_DATA) $$src $$dir/$$dest ;                   \
 395                  $(INSTALL_DATA) $$src $$dir/$$dest ;                   \
 396             echo rm -f $$src ;                                          \
 397                  rm -f $$src ;                                          \
 398           fi ;                                                          \
 399                                                                         \
 400           if [ ! -f $$dir/$$dest ]; then                                \
 401             e=echo ;                                                    \
 402  $$e ""                                                                      ;\
 403  $$e "  ####################################################################";\
 404  $$e "  Warning: xscreensaver has been compiled with support for Pluggable"  ;\
 405  $$e "           Authentication Modules (PAM).  However, we were unable to"  ;\
 406  $$e "           install the file $$dir/$$dest.  PAM is unlikely"            ;\
 407  $$e "           to work without this file (and old-style password"          ;\
 408  $$e "           authentication will be used instead, which may or may not"  ;\
 409  $$e "           work.)"                                                     ;\
 410  $$e "  ####################################################################";\
 411  $$e ""                                                                      ;\
 412           fi ;                                                          \
 413         elif [ -f $$conf ]; then                                        \
 414           if ( grep $$dest $$conf >/dev/null ); then                    \
 415            true ;                                                       \
 416           else                                                          \
 417             e=echo ;                                                    \
 418  $$e ""                                                                      ;\
 419  $$e "  ####################################################################";\
 420  $$e "  Warning: xscreensaver has been compiled with support for Pluggable"  ;\
 421  $$e "           Authentication Modules (PAM).  To complete the installation";\
 422  $$e "           of PAM support, you must add the following line to the file";\
 423  $$e "           $$conf:"                                                    ;\
 424  $$e ""                                                                      ;\
 425  $$e    "       $$dest  auth required   /usr/lib/security/pam_unix.so.1"     ;\
 426  $$e ""                                                                      ;\
 427  $$e "           Be careful: if you mess up that file, you could completely" ;\
 428  $$e "           hose your machine (e.g., \`login' and \`su' won't work, and";\
 429  $$e "           you'll have to boot single-user to fix it.)"                ;\
 430  $$e "  ####################################################################";\
 431             echo "";                                                    \
 432           fi ;                                                          \
 433         fi
 434
 435 install-gnome:: screensaver-properties.desktop
 436         @lost=""                                                             ;\
 437          if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 438                                                                               \
 439            if [ ! -d "$(install_prefix)$(GNOME_CCDIR)" ]; then                \
 440              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR)"          ;\
 441                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_CCDIR)"          ;\
 442            fi                                                                ;\
 443                                                                               \
 444            echo    $(INSTALL_DATA) screensaver-properties.desktop             \
 445              $(install_prefix)$(GNOME_CCDIR)/screensaver-properties.desktop;  \
 446                                                                               \
 447            if      $(INSTALL_DATA) screensaver-properties.desktop             \
 448              $(install_prefix)$(GNOME_CCDIR)/screensaver-properties.desktop;  \
 449              then true                                                       ;\
 450            else                                                               \
 451              lost="$$lost $(install_prefix)$(GNOME_CCDIR)"                   ;\
 452            fi                                                                ;\
 453                                                                               \
 454            if [ ! -d "$(install_prefix)$(GNOME_PANELDIR)" ]; then             \
 455              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_PANELDIR)"       ;\
 456                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_PANELDIR)"       ;\
 457            fi                                                                ;\
 458                                                                               \
 459            echo $(INSTALL_DATA) screensaver-properties.desktop                \
 460                         $(GNOME_PANELDIR)/screensaver-properties.desktop     ;\
 461            if   $(INSTALL_DATA) screensaver-properties.desktop                \
 462        $(install_prefix)$(GNOME_PANELDIR)/screensaver-properties.desktop     ;\
 463              then true                                                       ;\
 464            else                                                               \
 465              lost="$$lost $(install_prefix)$(GNOME_PANELDIR)"                ;\
 466            fi                                                                ;\
 467                                                                               \
 468            if [ "$$lost" != "" ]; then                                        \
 469              e=echo ;                                                         \
 470  $$e ""                                                                      ;\
 471  $$e "  ####################################################################";\
 472  $$e "  Warning: unable to install screensaver-properties.desktop into:"     ;\
 473         set - $$lost                                                         ;\
 474         for f in $$@ ; do echo "             $$f/" ; done                    ;\
 475  $$e '           This means the "Screen Saver" section of the Gnome'         ;\
 476  $$e "           Control Center (gnomecc) may not work properly."            ;\
 477  $$e "  ####################################################################";\
 478  $$e ""                                                                      ;\
 479              exit 1 ;                                                         \
 480            fi                                                                ;\
 481          fi
 482
 483 install-gnome:: screensaver-properties-capplet
 484         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 485            if [ ! -d "$(install_prefix)$(GNOME_BINDIR)" ]; then               \
 486              echo $(INSTALL_DIRS) "$(install_prefix)$(GNOME_BINDIR)"         ;\
 487                   $(INSTALL_DIRS) "$(install_prefix)$(GNOME_BINDIR)"         ;\
 488            fi                                                                ;\
 489            program=screensaver-properties-capplet                            ;\
 490            echo $(INSTALL_SCRIPT) $(srcdir)/$$program                         \
 491                   $(install_prefix)$(GNOME_BINDIR)/$$program                 ;\
 492            if   $(INSTALL_SCRIPT) $(srcdir)/$$program                         \
 493                   $(install_prefix)$(GNOME_BINDIR)/$$program                 ;\
 494              then true                                                       ;\
 495            else                                                               \
 496              e=echo ;                                                         \
 497  $$e ""                                                                      ;\
 498  $$e "  ####################################################################";\
 499  $$e "  Warning: unable to install $$program into"                           ;\
 500  $$e "           $(install_prefix)$(GNOME_BINDIR)/."                         ;\
 501  $$e "           Without this file, the Gnome session manager will not"      ;\
 502  $$e "           launch xscreensaver properly at login time."                ;\
 503  $$e "  ####################################################################";\
 504  $$e ""                                                                      ;\
 505              exit 1 ;                                                         \
 506            fi ;                                                               \
 507          fi
 508
 509 # xscreensaver.xpm
 510 install-gnome:: $(LOGO)
 511         @if [ "$(GTK_ICONDIR)" != "" ]; then                                  \
 512            if [ ! -d "$(install_prefix)$(GTK_ICONDIR)" ]; then                \
 513              echo $(INSTALL_DIRS) "$(install_prefix)$(GTK_ICONDIR)"          ;\
 514                   $(INSTALL_DIRS) "$(install_prefix)$(GTK_ICONDIR)"          ;\
 515            fi                                                                ;\
 516            target=xscreensaver.xpm                                           ;\
 517            echo $(INSTALL_DATA) $(LOGO)                                       \
 518                   $(install_prefix)$(GTK_ICONDIR)/$$target                   ;\
 519                 $(INSTALL_DATA) $(LOGO)                                       \
 520                   $(install_prefix)$(GTK_ICONDIR)/$$target                   ;\
 521         fi
 522
 523 # ../utils/images/screensaver-*.xpm
 524 install-gnome::
 525         @if [ "$(GTK_ICONDIR)" != "" ]; then                                  \
 526            if [ ! -d "$(install_prefix)$(GTK_ICONDIR)" ]; then                \
 527              echo $(INSTALL_DIRS) "$(install_prefix)$(GTK_ICONDIR)"          ;\
 528                   $(INSTALL_DIRS) "$(install_prefix)$(GTK_ICONDIR)"          ;\
 529            fi                                                                ;\
 530            for target in $(GTK_ICONS) ; do                                    \
 531              dest=`echo $$target | sed 's@^.*/@@'`                           ;\
 532              echo $(INSTALL_DATA) $$target                                    \
 533                   $(install_prefix)$(GTK_ICONDIR)/$$dest                     ;\
 534                   $(INSTALL_DATA) $$target                                    \
 535                   $(install_prefix)$(GTK_ICONDIR)/$$dest                     ;\
 536            done                                                              ;\
 537         fi
 538
 539 # screensaver-properties.desktop
 540 uninstall-gnome::
 541         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 542           f=screensaver-properties.desktop                                   ;\
 543           echo rm -f $(install_prefix)$(GNOME_CCDIR)/$$f                     ;\
 544                rm -f $(install_prefix)$(GNOME_CCDIR)/$$f                     ;\
 545           echo rm -f $(install_prefix)$(GNOME_PANELDIR)/$$f                  ;\
 546                rm -f $(install_prefix)$(GNOME_PANELDIR)/$$f                  ;\
 547         fi
 548
 549 # screensaver-properties-capplet
 550 uninstall-gnome::
 551         @if [ "$(GNOME_DATADIR)" != "" ]; then                                \
 552           program=screensaver-properties-capplet                             ;\
 553           echo rm -f $(install_prefix)$(bindir)/$$program                    ;\
 554                rm -f $(install_prefix)$(bindir)/$$program                    ;\
 555          fi
 556
 557 # xscreensaver.xpm
 558 uninstall-gnome::
 559         @if [ "$(GTK_ICONDIR)" != "" ]; then                                  \
 560           target=xscreensaver.xpm                                            ;\
 561           echo rm -f $(install_prefix)$(GTK_ICONDIR)/$$target                ;\
 562                rm -f $(install_prefix)$(GTK_ICONDIR)/$$target                ;\
 563          fi
 564
 565 # xscreensaver.xpm
 566 uninstall-gnome::
 567         @if [ "$(GTK_ICONDIR)" != "" ]; then                                  \
 568            for target in $(GTK_ICONS) ; do                                    \
 569              dest=`echo $$target | sed 's@^.*/@@'`                           ;\
 570              echo rm -f $(install_prefix)$(GTK_ICONDIR)/$$dest               ;\
 571                   rm -f $(install_prefix)$(GTK_ICONDIR)/$$dest               ;\
 572            done                                                              ;\
 573         fi
 574
 575 install-kde:
 576         @src="$(srcdir)/xscreensaver.kss" ;                                   \
 577         if [ "$$KDEDIR" != "" ]; then                                         \
 578           dir="$(install_prefix)$$KDEDIR/bin" ;                               \
 579           dest="$$dir/xscreensaver.kss" ;                                     \
 580           echo $(INSTALL_SCRIPT) $$src $$dest ;                               \
 581           if $(INSTALL_SCRIPT) $$src $$dest ; then                            \
 582             true ;                                                            \
 583           else                                                                \
 584             e=echo ;                                                          \
 585  $$e ""                                                                      ;\
 586  $$e "  ####################################################################";\
 587  $$e "  Warning: unable to install $$dest"                                   ;\
 588             if [ ! -d $(install_prefix)$$KDEDIR ]; then                       \
 589  $$e "           $(install_prefix)$$KDEDIR (\$$KDEDIR) does not exist."      ;\
 590             elif [ ! -d $(install_prefix)$$KDEDIR/bin ]; then                 \
 591  $$e "           $(install_prefix)$$KDEDIR/bin (\$$KDEDIR/bin) does not exist.";\
 592             elif [ -f $$dest ]; then                                          \
 593  $$e "           That file exists, and is unwritable."                       ;\
 594             else                                                              \
 595  $$e "           The directory is unwritable."                               ;\
 596             fi                                                               ;\
 597  $$e "  ####################################################################";\
 598  $$e ""                                                                      ;\
 599             exit 1 ;                                                          \
 600           fi ;                                                                \
 601         fi
 602
 603 uninstall-kde:
 604         @if [ "$$KDEDIR" != "" ]; then                                  \
 605           dest="$(install_prefix)$$KDEDIR/bin/xscreensaver.kss" ;       \
 606           echo rm -f $$dest ;                                           \
 607           rm -f $$dest ;                                                \
 608         fi
 609
 610 clean:
 611         -rm -f *.o a.out core $(EXES) $(EXES2) $(TEST_EXES) XScreenSaver_ad.h
 612
 613 distclean: clean
 614         -rm -f Makefile XScreenSaver.ad TAGS *~ "#"* screensaver-properties.desktop
 615
 616 # Adds all current dependencies to Makefile
 617 depend: XScreenSaver_ad.h
 618         $(DEPEND) -s '# DO NOT DELETE: updated by make depend'              \
 619         $(DEPEND_FLAGS) --                                                  \
 620         $(INCLUDES) $(DEFS) $(DEPEND_DEFINES) $(CFLAGS) $(X_CFLAGS) --      \
 621         $(SAVER_SRCS) $(CMD_SRCS) $(GETIMG_SRCS_1)
 622
 623 # Adds some dependencies to Makefile.in -- not totally accurate, but pretty
 624 # close.  This excludes dependencies on files in /usr/include, etc.  It tries
 625 # to include only dependencies on files which are themselves a part of this
 626 # package.
 627 distdepend: update_ad_version update_man_version XScreenSaver_ad.h
 628         @echo updating dependencies in `pwd`/Makefile.in... ;               \
 629         $(DEPEND) -w 0 -f -                                                 \
 630         -s '# DO NOT DELETE: updated by make distdepend' $(DEPEND_FLAGS) -- \
 631         $(INCLUDES) -I$(ICON_SRC) $(DEFS) $(DEPEND_DEFINES)                 \
 632         $(CFLAGS) $(X_CFLAGS) --                                            \
 633         $(SAVER_SRCS_1) $(MOTIF_SRCS) $(GTK_SRCS) $(GETIMG_SRCS_1)          \
 634         $(PWENT_SRCS) $(LOCK_SRCS_1) $(DEMO_SRCS_1) $(CMD_SRCS)             \
 635         $(TEST_SRCS) 2>/dev/null |                                          \
 636         sort -d |                                                           \
 637         (                                                                   \
 638           awk '/^# .*Makefile.in ---/,/^# DO .*distdepend/' < Makefile.in ; \
 639           sed -e '/^#.*/d'                                                  \
 640               -e 's@ \./@ @g;s@ /[^ ]*@@g;/^.*:$$/d'                        \
 641               -e 's@\.\./utils@$$(UTILS_SRC)@g'                             \
 642               -e 's@ \([^$$]\)@ $$(srcdir)/\1@g'                            \
 643               -e 's@$$.*\(XScreenSaver_ad\)@\1@g'                           \
 644               -e 's@ $$(srcdir)/\(.*config\.h\)@ \1@g' ;                    \
 645           echo ''                                                           \
 646         ) > /tmp/distdepend.$$$$ &&                                         \
 647         mv Makefile.in Makefile.in.bak &&                                   \
 648         mv /tmp/distdepend.$$$$ Makefile.in
 649
 650 # Updates the version number in the app-defaults file to be in sync with
 651 # the version number in version.h.  This is so people can tell when they
 652 # have a version skew between the app-defaults file and the executable.
 653 # Also update hacks/config/README in the same way.
 654 update_ad_version::
 655         @files="XScreenSaver.ad.in ../hacks/config/README" ;                \
 656         U=$(UTILS_SRC)/version.h ;                                          \
 657         V=`sed -n 's/.*\([0-9][0-9]*\.[0-9]*\).*/\1/p' < $$U` ;             \
 658         D=`date '+%d-%b-%Y'` ;                                              \
 659         for S in $$files ; do                                               \
 660           echo -n "Updating version number in $$S to $$V $$D... " ;         \
 661           T=/tmp/xs.$$$$ ;                                                  \
 662           sed -e "s/\(.*version \)[0-9][0-9]*\.[0-9]*\(.*\)/\1$$V\2/"       \
 663               -e "s/\([0-9][0-9]-[A-Z][a-z][a-z]-[0-9][0-9][0-9]*\)/$$D/"   \
 664             < $$S > $$T ;                                                   \
 665           if cmp -s $$S $$T ; then                                          \
 666             echo "unchanged." ;                                             \
 667           else                                                              \
 668             cat $$T > $$S ;                                                 \
 669             echo "done." ;                                                  \
 670           fi ;                                                              \
 671         done ;                                                              \
 672         rm $$T
 673
 674 update_man_version::
 675         @for S in $(MEN); do                                                \
 676         U=$(UTILS_SRC)/version.h ;                                          \
 677         V=`sed -n 's/.*\([0-9][0-9]*\.[0-9]*\).*/\1/p' < $$U` ;             \
 678         V="`date '+%d-%b-%Y'` ($$V)" ;                                      \
 679         echo -n "Updating footer in $$S to \"$$V\"... " ;                   \
 680         T=/tmp/xs.$$$$ ;                                                    \
 681         sed "s/^\(\.TH[^\"]*\)\"[^\"]*\"\(.*\)/\1\"$$V\"\2/"                \
 682           < $$S > $$T ;                                                     \
 683         if cmp -s $$S $$T ; then                                            \
 684           echo "unchanged." ;                                               \
 685         else                                                                \
 686           cat $$T > $$S ;                                                   \
 687           echo "done." ;                                                    \
 688         fi ;                                                                \
 689         rm $$T ;                                                            \
 690         done
 691
 692 TAGS: tags
 693 tags:
 694         find $(srcdir) -name '*.[chly]' -print | xargs etags -a
 695
 696 echo_tarfiles:
 697         @$(MAKE) XScreenSaver_ad.h 2>&1 >&- /dev/null
 698         @echo $(TARFILES)
 699
 700
 701 # Rules for noticing when the objects from the utils directory are out of
 702 # date with respect to their sources, and going and building them according
 703 # to the rules in their own Makefile...
 704 #
 705 $(UTILS_BIN)/fade.o:            $(UTILS_SRC)/fade.c
 706 $(UTILS_BIN)/overlay.o:         $(UTILS_SRC)/overlay.c
 707 $(UTILS_BIN)/resources.o:       $(UTILS_SRC)/resources.c
 708 $(UTILS_BIN)/usleep.o:          $(UTILS_SRC)/usleep.c
 709 $(UTILS_BIN)/visual.o:          $(UTILS_SRC)/visual.c
 710 $(UTILS_BIN)/xmu.o:             $(UTILS_SRC)/xmu.c
 711 $(UTILS_BIN)/logo.o:            $(UTILS_SRC)/logo.c
 712 $(UTILS_BIN)/yarandom.o:        $(UTILS_SRC)/yarandom.c
 713 $(UTILS_BIN)/colorbars.o:       $(UTILS_SRC)/colorbars.c
 714
 715 $(SAVER_UTIL_OBJS):
 716         cd $(UTILS_BIN) ; \
 717         $(MAKE) $(@F) CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"
 718
 719 # How we build object files in this directory.
 720 .c.o:
 721         $(CC) -c $(INCLUDES) $(DEFS)  $(CFLAGS) $(X_CFLAGS) $<
 722
 723 # subprocs takes an extra -D option.
 724 subprocs.o: subprocs.c
 725         $(CC) -c $(INCLUDES) $(SUBP_DEFS) $(CFLAGS) $(X_CFLAGS) \
 726           $(srcdir)/subprocs.c
 727
 728 # demo-Gtk takes extra -D options, and an extra -I option.
 729 demo-Gtk.o: demo-Gtk.c
 730         $(CC) -c $(INCLUDES) $(SUBP_DEFS) -I$(ICON_SRC) \
 731           $(GTK_DEFS) $(INTL_DEFS) $(CFLAGS) $(X_CFLAGS) \
 732           $(srcdir)/demo-Gtk.c
 733
 734 # demo-Gtk-conf takes an extra -D option.
 735 demo-Gtk-conf.o: demo-Gtk-conf.c
 736         $(CC) -c $(INCLUDES) $(CONF_DEFS) $(GTK_DEFS) $(CFLAGS) $(X_CFLAGS) \
 737           $(srcdir)/demo-Gtk-conf.c
 738
 739
 740 # How we build the default app-defaults file into the program.
 741 #
 742 XScreenSaver_ad.h: XScreenSaver.ad
 743         $(SHELL) $(UTILS_SRC)/ad2c XScreenSaver.ad > XScreenSaver_ad.h
 744
 745 @INTLTOOL_DESKTOP_RULE@
 746
 747 # The executables linked in this directory.
 748 #
 749 xscreensaver: $(SAVER_OBJS)
 750         $(CC) $(LDFLAGS) -o $@ $(SAVER_OBJS) $(SAVER_LIBS)
 751
 752 xscreensaver-command: $(CMD_OBJS)
 753         $(CC) $(LDFLAGS) -o $@ $(CMD_OBJS) $(CMD_LIBS)
 754
 755
 756 xscreensaver-demo: @PREFERRED_DEMO_PROGRAM@
 757         cp -p @PREFERRED_DEMO_PROGRAM@@EXEEXT@ $@@EXEEXT@
 758 #       $(INSTALL_PROGRAM) @PREFERRED_DEMO_PROGRAM@ $@
 759
 760 xscreensaver-demo-Xm: $(DEMO_OBJS) $(MOTIF_OBJS)
 761         $(CC) $(LDFLAGS) -o $@ $(DEMO_OBJS) $(MOTIF_OBJS) $(LIBS) $(X_LIBS) \
 762         $(MOTIF_LIBS) $(INTL_LIBS) $(X_PRE_LIBS) -lXt -lX11 \
 763         $(XDPMS_LIBS) -lXext $(X_EXTRA_LIBS)
 764
 765 xscreensaver-demo-Gtk: $(DEMO_OBJS) $(GTK_OBJS)
 766         $(CC) $(LDFLAGS) -o $@ $(DEMO_OBJS) $(GTK_OBJS) $(LIBS) $(X_LIBS) \
 767         $(GTK_LIBS) $(XML_LIBS) $(INTL_LIBS) $(X_PRE_LIBS) -lXt -lX11 \
 768         $(XDPMS_LIBS) -lXext $(X_EXTRA_LIBS)
 769
 770 xscreensaver-getimage: $(GETIMG_OBJS)
 771         $(CC) $(LDFLAGS) -o $@ $(GETIMG_OBJS) $(GETIMG_LIBS) -lm
 772
 773
 774 TEST_PASSWD_OBJS = test-passwd.o $(LOCK_OBJS_1) $(PASSWD_OBJS) \
 775          subprocs.o setuid.o splash.o prefs.o \
 776         $(SAVER_UTIL_OBJS)
 777 test-passwd.o: XScreenSaver_ad.h
 778
 779 test-passwd: $(TEST_PASSWD_OBJS) XScreenSaver_ad.h
 780         $(CC) $(LDFLAGS) -o $@ $(TEST_PASSWD_OBJS) $(SAVER_LIBS)
 781
 782 test-uid: test-uid.o
 783         $(CC) $(LDFLAGS) -o $@ test-uid.o
 784
 785 test-xdpms: test-xdpms.o
 786         $(CC) $(LDFLAGS) -o $@ test-xdpms.o $(LIBS) $(X_LIBS) $(XDPMS_LIBS) \
 787         $(X_PRE_LIBS) -lXt -lX11 -lXext $(X_EXTRA_LIBS)
 788
 789 test-grab: test-grab.o
 790         $(CC) $(LDFLAGS) -o $@ test-grab.o $(SAVER_LIBS)
 791
 792 test-apm: test-apm.o
 793         $(CC) $(LDFLAGS) -o $@ test-apm.o $(SAVER_LIBS) -lapm
 794
 795 TEST_FADE_OBJS = test-fade.o $(UTILS_SRC)/fade.o $(DEMO_UTIL_OBJS)
 796 test-fade: test-fade.o $(UTILS_BIN)/fade.o
 797         $(CC) $(LDFLAGS) -o $@ $(TEST_FADE_OBJS) $(SAVER_LIBS)
 798
 799
 800 xdpyinfo.o: xdpyinfo.c
 801         $(CC) -c $(INCLUDES) -DHAVE_GLX $(CFLAGS) $(X_CFLAGS) \
 802           $(srcdir)/xdpyinfo.c
 803
 804 xdpyinfo: xdpyinfo.o
 805         $(CC) $(LDFLAGS) -o $@ xdpyinfo.o \
 806                 $(LIBS) $(X_LIBS) @GL_LIBS@ \
 807                 $(X_PRE_LIBS) -lX11 -lXext $(X_EXTRA_LIBS) -lm
 808
 809
 810 ##############################################################################
 811 #
 812 # DO NOT DELETE: updated by make distdepend
 813
 814 demo-Gtk-conf.o: ../config.h
 815 demo-Gtk-conf.o: $(srcdir)/demo-Gtk-conf.h
 816 demo-Gtk.o: XScreenSaver_ad.h
 817 demo-Gtk.o: ../config.h
 818 demo-Gtk.o: $(srcdir)/demo-Gtk-conf.h
 819 demo-Gtk.o: $(srcdir)/demo-Gtk-support.h
 820 demo-Gtk.o: $(srcdir)/demo-Gtk-widgets.h
 821 demo-Gtk.o: $(srcdir)/prefs.h
 822 demo-Gtk.o: $(srcdir)/remote.h
 823 demo-Gtk-support.o: ../config.h
 824 demo-Gtk-support.o: $(srcdir)/demo-Gtk-support.h
 825 demo-Gtk-widgets.o: ../config.h
 826 demo-Gtk-widgets.o: $(srcdir)/demo-Gtk-stubs.h
 827 demo-Gtk-widgets.o: $(srcdir)/demo-Gtk-support.h
 828 demo-Gtk-widgets.o: $(srcdir)/demo-Gtk-widgets.h
 829 demo-Xm.o: XScreenSaver_ad.h
 830 demo-Xm.o: ../config.h
 831 demo-Xm.o: $(srcdir)/prefs.h
 832 demo-Xm.o: $(srcdir)/remote.h
 833 demo-Xm-widgets.o: ../config.h
 834 dpms.o: ../config.h
 835 dpms.o: $(srcdir)/prefs.h
 836 dpms.o: $(srcdir)/xscreensaver.h
 837 exec.o: ../config.h
 838 lock.o: ../config.h
 839 lock.o: $(srcdir)/prefs.h
 840 lock.o: $(srcdir)/xscreensaver.h
 841 passwd.o: ../config.h
 842 passwd-pwent.o: ../config.h
 843 prefs.o: ../config.h
 844 prefs.o: $(srcdir)/prefs.h
 845 remote.o: ../config.h
 846 remote.o: $(srcdir)/remote.h
 847 setuid.o: ../config.h
 848 setuid.o: $(srcdir)/prefs.h
 849 setuid.o: $(srcdir)/xscreensaver.h
 850 splash.o: ../config.h
 851 splash.o: $(srcdir)/prefs.h
 852 splash.o: $(srcdir)/xscreensaver.h
 853 stderr.o: ../config.h
 854 stderr.o: $(srcdir)/prefs.h
 855 stderr.o: $(srcdir)/xscreensaver.h
 856 subprocs.o: ../config.h
 857 subprocs.o: $(srcdir)/prefs.h
 858 subprocs.o: $(srcdir)/xscreensaver.h
 859 test-apm.o: ../config.h
 860 test-fade.o: ../config.h
 861 test-fade.o: $(srcdir)/prefs.h
 862 test-fade.o: $(srcdir)/xscreensaver.h
 863 test-grab.o: ../config.h
 864 test-passwd.o: XScreenSaver_ad.h
 865 test-passwd.o: ../config.h
 866 test-passwd.o: $(srcdir)/prefs.h
 867 test-passwd.o: $(srcdir)/xscreensaver.h
 868 test-uid.o: ../config.h
 869 test-xdpms.o: ../config.h
 870 timers.o: ../config.h
 871 timers.o: $(srcdir)/prefs.h
 872 timers.o: $(srcdir)/xscreensaver.h
 873 windows.o: ../config.h
 874 windows.o: $(srcdir)/prefs.h
 875 windows.o: $(srcdir)/xscreensaver.h
 876 xscreensaver-command.o: ../config.h
 877 xscreensaver-command.o: $(srcdir)/remote.h
 878 xscreensaver-getimage.o: ../config.h
 879 xscreensaver-getimage.o: XScreenSaver_ad.h
 880 xscreensaver-getimage.o: $(srcdir)/prefs.h
 881 xscreensaver.o: XScreenSaver_ad.h
 882 xscreensaver.o: ../config.h
 883 xscreensaver.o: $(srcdir)/prefs.h
 884 xscreensaver.o: $(srcdir)/xscreensaver.h
 885 xset.o: ../config.h
 886 xset.o: $(srcdir)/prefs.h
 887 xset.o: $(srcdir)/xscreensaver.h
 888